summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2020-03-01soc/intel/{icl,jsl,tgl}: Enable PlatformDebugConsent by KconfigSubrata Banik
This change is mainly to control PlatformDebugConsent FSP UPD. PlatformDebugConsent is enabled if SOC_INTEL_<SOC>LAKE_DEBUG_CONSENT != 0. PlatformDebugConsent in FspmUpd.h has the details. TEST=Able to connect ITP/DCI with target system. Change-Id: I39fe84025cb2bff186d61b2fcad531db52e2b440 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-02-28soc/intel/cannonlake: Plumb TetonGlacierMode into dtEdward O'Callaghan
The following plumbs through the enabling of Intel's TetonGlacierMode allows for reconfiguring the PCIe lanes at runtime for hybrid drives to be accessable via devicetree. BUG=b:149171631 BRANCH=none TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration on Puff. Change-Id: Id9a72161494db6a4da4abd3302b06df7c70634ab Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-27soc/intel/tigerlake: Add display related UPD configs for Jasper LakeAamir Bohra
TEST=Build dedede board Change-Id: I942a7036bf627b3d8262756e5e2026dcb0949dd5 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39131 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-27soc/intel/tigerlake: Update FSP params for Jasper LakeMaulik V Vaghela
Update FSP parameters for various configurations like: - graphics - USB - PCIe root ports - SD card - eMMC - Audio - Basic UART configuration These are the initial settings for JSL. This patch also corrects the debug_interface_flag definitions. TEST=Build dedede board Change-Id: Ia8e88f92989fe40d7bd1c28947e005cc0d862fcb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-02-26soc/intel/tigerlake: Integrate Legacy 8254 timer supportSubrata Banik
This patch overrides required FSP-S UPDs to enable 8254 timer support for TGL if CONFIG_USE_LEGACY_8254_TIMER is selected. TEST=Required to boot TianoCore payload. Change-Id: Iaeff5c4b92691ed6ba7b71541ed4f947d5d299a8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-02-26treewide: capitalize 'USB'Elyes HAOUAS
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-26soc/intel/{cnl,icl}: Avoid static 8254 clock gating on S3 resumeSubrata Banik
This patch makes all legacy 8254 FSP UPDs (Enable8254ClockGating and Enable8254ClockGatingOnS3) depend on CONFIG_USE_LEGACY_8254_TIMER to avoid discrepancy between S0 and S3 resume flow. TEST=Able to boot to TianoCore without any hangs and errors, also verified S3 resume path doesn't clock gate 8254 timer using FSP-S UPD. Change-Id: Id6fe74a51537abbb9ff48db925e37a64e5b21f78 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39110 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-25soc/mediatek/mt8183: Fix programming error of DRAMC settingHuayang Duan
1. The ac timing of 2400Mbps should use diff params with 1600Mbps. 2. Fix the typo error of save shuffle function for DVFS. BRANCH=kukui BUG=none TEST=emerge-kukui coreboot Change-Id: I5edac32938def50836f386426e7deb652b80d42d Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-25soc/mediatek: Fix typos in commentsElyes HAOUAS
Also add missing whitespace. Change-Id: I3361122d5232072e68d018e84219a262acf34001 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2020-02-25soc/intel/common: Update Jasper Lake Device IDsMeera Ravindranath
Update Jasper Lake CPU, SA and PCH IDs. BUG=b:149185282 BRANCH=None TEST=Compilation for Jasper Lake board is working Change-Id: I2c9ec1eb4236184b981d99250f263172c82f7117 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-02-25soc/intel/common/block: Move cse common functions into block/cseSubrata Banik
This patch cleans soc/intel/{cnl, icl, tgl} by moving common soc code into common/block/cse. Supported SoC can select existing HECI_DISABLE_USING_SMM option to select common cse code block to make heci function disable using sideband interface during SMM mode at preboot envionment. BUG=b:78109109 TEST=Able to make HECI disable in SMM mode successfully without any hang or errors in CNL, ICL and TGL platform. Change-Id: I22a4cc05d3967c7653d2abe2c829b4876516d179 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26133 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-25soc/intel/common/block: Move smihandler common functions into common codeSubrata Banik
This patch cleans soc/intel/{apl/cnl/skl/icl/tgl} by moving common soc code into common/block/smihandler.c BUG=b:78109109 TEST=Build and boot KBL/CNL/APL/ICL/TGL platform. Change-Id: Ic082bc5d556dd19617d83ab86f93a53574b5bc03 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-25soc/intel/cannonlake: Add TDC config for CMLMarx Wang
Add Thermal Design Current (TDC) defaults for CML: 1. TdcEnable 2. TdcPowerLimit BUG=b:148912093 BRANCH=None TEST=build coreboot and Intel FSP with fw_debug enabled, flash image to the device, capture the log from the serial port during boot-up and check TdcEnable and TdcPowerLimit for each domain in captured log Signed-off-by: Marx Wang <marx.wang@intel.com> Change-Id: Ie4b17e5b4ce41c1adb436ae5646f0d8578a440e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-24treewide: Capitalize 'CMOS'Elyes HAOUAS
Change-Id: I1d36e554618498d70f33f6c425b0abc91d4fb952 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38928 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24soc/intel/icelake: Skip FSP-S IGD related UPD overrideSubrata Banik
Default FSP values for "GtFreqMax" and "CdClock" UPDs are "Auto", hence related FSP-S UPD override can be avoided from coreboot. As per FSP-S UPD Header (FspsUpd.h) /** Offset 0x020E - GT Frequency Limit 0xFF: Auto(Default) **/ UINT8 GtFreqMax; /** Offset 0x0209 - CdClock Frequency selection 0: (Default) Auto **/ UINT8 CdClock; TEST=Able to get Pre-OS display on ICLRVP and Dragonegg platform. Change-Id: Ie500dd5fad5cd358ea3fad4d5c0be1b0c148584b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-02-24soc/rockchip: Fix typosElyes HAOUAS
Change-Id: I85ccb9e1458340bd5bc2a0eb9abed8d0eeb2fe65 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-24soc/{samsung,sifive}: Fix typosElyes HAOUAS
Change-Id: Ib370f04a63160e2a8a1b06620e659feb45c8f552 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2020-02-24soc/amd/common/block/include/amdblocks: Fix typosElyes HAOUAS
Change-Id: I8363816a51c342935668545a8b39acce96ce4b2c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38980 Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24src: capitalize 'RAM'Elyes HAOUAS
Change-Id: Ia05cb2de1b9f2a36fc9ecc22fb82f0c14da00a76 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-24soc/intel/cnl: Rename hfsts into me_hfstsSridhar Siricilla
Remove me_hfs3 union from cnl/me.c since it's already defined in soc/me.h. Rename below union tags for consistency: hfsts2 -> me_hfsts2 hfsts3 -> me_hfsts3 hfsts4 -> me_hfsts4 hfsts5 -> me_hfsts5 hfsts6 -> me_hfsts6 TEST=Verified on hatch Change-Id: If81edbad0322425ee3e96c55a9c84a5087604308 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-23soc/intel/apollolake: Make SMI_STS offset macro definition consistentSubrata Banik
This patch makes all bit field macro definition for SMI_STS register (offset 0x44) be consistent i.e. ending with "_STS_BIT". Also modified relevant files where those macros are getting used. Change-Id: Ibe3fbb459c106a3a58cd9a8b6eb3d7ee92e6ed82 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-21security/intel/stm: Use depends on ENABLE_VMXEugene Myers
The STM is a part of the core VTx and using ENABLE_VMX will make the STM option available for any configuration that has an Intel processor that supports VTx. Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov> Change-Id: I57ff82754e6c692c8722d41f812e35940346888a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38852 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-20soc/amd/stoneyridge: Remove TODO for file extensionsMarshall Dawson
The comment is no longer relevant. Perhaps the intention had been to modify the names of the files delivered from AMD in order to simplify Makefile.inc. AMD firmware is distributed via the new amd_blobs repo and the filenames match the blobs as they are released. Multiple Family 15h devices are supported by this directory and their SMU Firmwares do not all follow identical naming convention. Keep the existing functionality and reword the comment. BUG=b:120118850 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ifbf8e2286f34bc37a6178c37f8c412ec51ee02c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-19soc/intel/common/block/lpc: Drop unnecessary helper functionSubrata Banik
This patch removes unnecessary helper function pch_lpc_interrupt_init() and directly uses soc_pch_pirq_init() function to avoid redundant device NULL check. TEST=Able to build and boot CML platform. Change-Id: I3d11afb7e98f9b7f84beb2fdf308bbffeb3bbff7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38952 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-19soc/tigerlake: Add IRQ header and ACPI support for JSPMeera Ravindranath
Tigerlake irq.h and pci_irqs.asl have differences compared to Jasperlake. Hence renaming irq.h as irq_tgl.h and pci_irqs.asl as pci_irqs_tgl.asl Also adding a new file irq_jsl.h and pci_irqs_jsl.asl for Jasperlake SoC and allowing irq.h and pci_irqs.asl to choose the correct file based on SoC selected. BUG=None BRANCH=None TEST=Compilation for Jasperlake board is working Change-Id: Ia8e88f92929fe40d7be1c28947e005cb0d862fcb Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-02-19soc/intel/p2sb: Drop unnecessary P2SB_GET_DEVNico Huber
PCH_DEV_P2SB already covers both __SIMPLE_DEVICE__ cases. The values are only used for PCI-config access functions, which also check for NULL when necessary. The PCI_DEV_INVALID case can't occur by definition, and if we wanted to check, we could do so at compile time using _Static_assert(). Change-Id: I400fc20133809aaa0fd0519531a62ec9b8812ef1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-18soc/intel/common: Add function to wait for CSE to enter Soft Temp Disable modeSridhar Siricilla
Below helper function is added: cse_wait_com_soft_temp_disable() - It polls for CSE's operation mode 'Soft Temporary Disable'. CSE enters this mode when it boots from RO(BP1) partition. The function must be called after resetting CSE to wait for CSE to enter 'Soft Temporary Disable' Mode. BUG=b:145809764 Change-Id: Ibdcf01f31b0310932b8e834ae83144f8a67f1fef Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-02-18soc/intel/common: Check prerequisites for HMRFPO_GET_STATUS commandSridhar Siricilla
Send HMRFPO_GET_STATUS command when CSE's current working state is Normal. TEST=Verified on hatch. Change-Id: I4380e5096c6346d88aae6826d19a2f4ed1e97036 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-02-17treewide: capitalize 'BIOS'Elyes HAOUAS
Also replace 'BIOS' by coreboot when the image is 'coreboot.rom'. Change-Id: I8303b7baa9671f19a036a59775026ffd63c85273 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-17soc/intel/tigerlake: Enable Audio on TGLSrinidhi N Kaushik
Configure UPDs to support Audio enablement. Correct the upd name in jslrvp devicetree to avoid compilation issue. BUG=b:147436144 BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Idd3927a33d303ed5a663b5b838f43ed4ebc7a0db Reviewed-on: https://review.coreboot.org/c/coreboot/+/38147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-02-17src/intel: Define HFSTS3 registerSridhar Siricilla
Changes: 1. Define HFSTS3 register across SoCs(apl/cnl/icl/tgl). 2. Define cse_is_hfs3_fw_sku_custom() which checks ME's Firmware SKU is Custom or not. TEST=Verified on hatch, soraka, bobba and iclrvp. Change-Id: I4188e58a4a08d87be2d84674e00ed1407fb8bf82 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-02-17soc/intel/skl: Rename me_hfs union into me_hfstsSridhar Siricilla
Rename below union tags for consistency: me_hfs2 -> me_hfsts2 me_hfs3 -> me_hfsts3 me_hfs6 -> me_hfsts6 TEST=Verified on Soraka Change-Id: Ibb53e6a5f2b95021f86b3e42e100b711b7d6e64e Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-17src/soc/tigerlake: Accomodate JSP specific changes in iomap.hMeera Ravindranath
Updating MCH, GSPI And I2C base addresses for JSP in iomap header. BUG=None BRANCH=None TEST=Compilation for Jasper lake board is working Change-Id: Ia8e88e02989fe80d7bd1f28942e005cb0d862fcb Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38754 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17soc/mediatek: dsi: Correct bits_per_pixel for MIPI_DSI_FMT_RGB666Yu-Ping Wu
The number of bits per pixel for MIPI_DSI_FMT_RGB666 should be 24 instead of 18. BRANCH=none BUG=none TEST=none Change-Id: I9574502b2dec4b5a042df3886922ddd8c755da1a Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jitao Shi <jitao.shi@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-17soc/mediatek: dsi: reduce the hbp and hfp for phy timingJitao Shi
The extra data transfer in DSI, namely, lpx, hs_prepare, hs_zero, hs_exit and the sof/eof of DSI packets, will enlarge the line time, which causes the real frame on dsi bus to be lower than the one calculated by video timing. Therefore, hfp_byte is reduced by d_phy to compensate the increase in time by the extra data transfer. However, if hfp_byte is not large enough, the hsync period will be increased on DSI data, leading to display scrolling in firmware screen. To avoid this situation, this patch changes the DSI Tx driver to reduce both hfp_byte and hbp_byte, with the amount proportional to hfp and hbp, respectively. Refer to kernel's change in CL:1915442. Also rename 'phy_timing' to 'timing' to sync with kernel upstream. Since the phy timing initialization sequence has been corrected, the m value adjustment in the analogix driver can be removed. BUG=b:144824303 BRANCH=kukui TEST=emerge-jacuzzi coreboot TEST=Boots and sees firmware screen on krane and juniper TEST=No scrolling issue on juniper AUO and InnoLux panels Change-Id: I10a4d8a4fb41c309fa1917cf1cdf19dabed98227 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-17soc/mediatek: dsi: Increase pcw precisionYu-Ping Wu
When configuring MIPI DSI Tx, the value of pcw was calculated from data rate in MHz, leading to loss of precision. This patch changes to use data rate in Hz for the calculation so that the resulting value should be consistent with the one in kernel (CL:1786327). In addition, change the type of data rate to u32, and calculation of data rate from pixel clock is changed to use DIV_ROUND_UP for consistency with kernel (CL:1761843). Also remove unused variable txdiv. BRANCH=kukui BUG=b:149051882 TEST=emerge-jacuzzi coreboot TEST=No scrolling issue on Juniper AUO and InnoLux panels Change-Id: I23220d446833b956431006027bbc8cb20fc696a5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38827 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17soc/tigerlake: Add Device id for Tiger Lake Dual CoreSrinidhi N Kaushik
Add device id for Tiger Lake Dual core part. BUG=b:148965583 BRANCH=none TEST="emerge-tglrvp coreboot chromeos-bootimage", flash and boot Change-Id: Ied0cef2fcc8ae6f25949f98f886c4d79f64b54cd Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-02-17soc/intel/{cnl,icl,skl,tgl}/bootblock: Update text for DMI PCR 2774Wim Vervoorn
Make sure the Skylake comment refers to the correct BWG paragraph and update the text for all. BUG=N/A TEST=build Change-Id: Id383f200e079bdb91cea2240bd7a957d723a7b89 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-02-17soc/intel{cnl,icl,skl,tgl}/bootblock: Make sure DMI PCR 2770 is setWim Vervoorn
DMI PCR 2770 (LPC IO DECODE RANGES) should be identical to LPC PCI offset 0x80. This is specified in PCH BWG par 2.5.1.5. Add the support to make sure this PCR is always set correctly. BUG=N/A TEST=tested on facebook monolith. Change-Id: I33ff2b96dea78b5ff1c7c9416cf74f67d79f265d Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38746 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17vboot: remove VBOOT_SAVE_RECOVERY_REASON_ON_REBOOT optionJoel Kitching
With CL:1940398, this option is no longer needed. Recovery requests are not cleared until kernel verification stage is reached. If the FSP triggers any reboots, recovery requests will be preserved. In particular: - Manual requests will be preserved via recovery switch state, whose behaviour is modified in CB:38779. - Other recovery requests will remain in nvdata across reboot. These functions now only work after verstage has run: int vboot_check_recovery_request(void) int vboot_recovery_mode_enabled(void) int vboot_developer_mode_enabled(void) BUG=b:124141368, b:35576380 TEST=make clean && make test-abuild BRANCH=none Change-Id: I52d17a3c6730be5c04c3c0ae020368d11db6ca3c Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38780 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-15soc/tigerlake: Update xhci ACPI files for JSPMeera Ravindranath
ACPI files for xhci in JSL is different from TGL. Hence, renaming xhci.asl to xhci_tgl.asl and adding a new file xhci_jsl.asl for JSL. Also, allowing xhci.asl to choose the correct file based on the SoC selected. BUG=None BRANCH=None TEST=Compilation for JasperLake board is working Change-Id: Ia8e88e02989ff80d7cd1f28941e005cb0d842fcb Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-15soc/intel/tigerlake: Update PMC Register Base and platform check for JSPUsha P
Change: 1. PCR_PSF3_TO_SHDW_PMC_REG_BASE_JSP to 0X0A00 for JSP 2. Platform check in espi.c BUG=None TEST= 1. Test for JSL RVP Boot 2. Verify PMC register values are valid for GEN_PMCON and GBLRST_CAUSE from the coreboot console logs. Change-Id: I6017a9703764b5454e7be479c1e08afe614908f1 Signed-off-by: Usha P <usha.p@intel.com> Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38704 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-15soc/intel/tigerlake: Update Kconfig related to JSLUsha P
Update Kconfig: 1. select INTEL_CAR_NEM for SOC_INTEL_JASPERLAKE 2. Update the right value of MAX_ROOT_PORTS and MAX_PCIE_CLOCKS for SOC_INTEL_JASPERLAKE Change-Id: I4aa52c80bfd6134164a0925ea548579b3cc54a55 Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-12soc/intel/{skl, common}: Move ME Firmware SKU Types to common codeSridhar Siricilla
1. Move ME firmware SKU types into common code. 2. Define ME_HFS3_FW_SKU_CUSTOM SKU. TEST=Verified on hatch & soraka. Change-Id: Iaa4cf8d5b41c1008da1e7aa63b5a6960bb9a727b Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-11vendorcode/intel: Remove Ice Lake FSP BindingsJohanna Schander
By updating the FSP submodule we now got all FSP headers from within that repo. This commit changes the default paths to use these and fixes some include paths to allow the usage of vendorcode/intel/edk2/UDK2017 together with the official Intel distribution. We are also adding back the CHANNEL_PRESENT enum, that is missing in the official headers. This was tested on the Razer Blade Stealth (late 2019). Change-Id: I7d5520dcd30f4a68af325125052e16e867e91ec9 Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37579 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christoph Pomaska <github@slrie.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-11soc/intel/common/block/lpc: Add lpc_get_fixed_io_decodeWim Vervoorn
Add function to return the fixed io decode ranges contained in register 0x80 of the LPC interface. BUG=N/A TEST=build Change-Id: Ie46d7c9d7a399a8489c030d906f75ba61db19cc4 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38745 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09intel/stm: Add platform opt-in KconfigNico Huber
Selecting STM on an arbitrary platform would likely result in a brick, so let's hide the prompt by default. Change-Id: I50f2106ac05c3efb7f92fccb1e6edfbf961b68b8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: <cedarhouse1@comcast.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-09soc/intel/tigerlake: add memory configuration supportNick Vaccaro
Move some of the common memory code that was being performed in mainboard into the soc to reduce redundant code going forward. BUG=b:145642089 BRANCH=none TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer, log into kernel and verify memory size shows 8GB. Change-Id: I8de502d4f05d52b9dae34e3b013c6d5b1886fa55 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09soc/intel/{cnl,icl,skl,tgl,common}: Make changes to ↵Sridhar Siricilla
send_heci_reset_req_message() Below changes have been implemented in send_heci_reset_req_message(): 1. Modify return values to align with other functions in the same file. 2. Add additional logging. 3. Replace macro definitions of reset types with ENUM. 4. Make changes to caller functions to sync with new return values. 5. Rename send_heci_reset_req_message() to cse_request_global_reset(). Test=Verified on hatch board. Change-Id: I979b169a5bb3a5d4028ef030bcef2b8eeffe86e3 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37584 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09soc/intel/common: Add description to HMRFPO statusSridhar Siricilla
Below changes are implemented: 1. Fix typos. 2. Rename 'padding' field of hmrfpo_get_status_resp struct to 'reserved' to match with ME BWG Guide. 3. Add documentation for HMRFPO Status. TEST=Build and boot hatch Change-Id: I4db9bdf7386c48e17ed0373cf334ccff358d1951 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09soc/intel/common: Rename functions for consistent namingSridhar Siricilla
Below changes are done: 1. Rename below functions to have consistent naming: set_host_ready() -> cse_set_host_ready() wait_cse_sec_override_mode() -> cse_wait_sec_override_mode() send_hmrfpo_enable_msg() -> cse_hmrfpo_enable() send_hmrfpo_get_status_msg() -> cse_hmrfpo_get_status() 2. Additional debug messages are added in cse_wait_sec_override_mode(). TEST=Build and Boot hatch board. Change-Id: Icfcf1631cc37faacdea9ad84be55f5710104bad5 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09soc/intel/{common,skl,cnl,icl,apl,tgl}: Move HFSTS1 register definition to SoCSridhar Siricilla
Below changes are implemented: 1. Move HFSTS1 register definition to SoC since HFSTS1 register definition is specific to a SoC. Moving structure back to SoC specific to avoid unnecessay SoC specific macros in the common code. 2. Define a set of APIs in common code since CSE operation modes and working states are same across SoCs. cse_is_hfs1_com_normal(void) cse_is_hfs1_com_secover_mei_msg(void) cse_is_hfs1_com_soft_temp_disable(void) cse_is_hfs1_cws_normal(void) 3. Modify existing code to use callbacks to get data of me_hfs1 structure. TEST=Build and Boot hatch, soraka, tglrvp, bobba and iclrvp boards. Change-Id: If7ea6043d7b5473d0c16e83d7b2d4b620c125652 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-07sc7180: clock: Fix QUP DFSR configuration for perf levelsTaniya Das
Update the QUP DFSR cmd to clear the SW control and also update the perf registers when M is set. While at it also update the d_2 values. Tested: validated DFSR clock configuration and M/N/D values. Change-Id: I6bba1c6f99810963aaa607885ef400c523c0e905 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-02-04soc/intel: Add get_pmbaseEugene Myers
Originally a part of security/intel/stm. Add get_pmbase to the intel platform setup code. get_pmbase is used by the coreboot STM setup functions to ensure that the pmbase is accessable by the SMI handler during runtime. The pmbase has to be accounted for in the BIOS resource list so that the SMI handler is allowed this access. Change-Id: If6f6295c5eba9eb20e57ab56e7f965c8879e93d2 Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37990 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-04soc/intel/cannonlake: Allow Audio DSP OSC qualification for low power idleAamir Bohra
With Audio DSP OSC qualification disabled from S0ix criteria. S0ix is achieved before the DSP is suspended. When driver tries to suspend DSP its already turned off. BUG=b:139481313 Change-Id: I20b793b95483af03ce4ae068ac07864a9e90d39b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37604 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-04soc/intel: Remove duplicate CPUID entrySubrata Banik
This patch removes duplicate CPUID entry between KBL and CFL. CFL-D0 has KBL CPU + CNP PCH hence no need to redefine same KBL CPUID (0x806EA) for CFL-D0. TEST=CFL-D0 report platform serial msg shows "Cofeelake D0" with CPUID 0x806EA. Change-Id: I078dd7860891896b512967dc8dec5dd94d069193 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-02-04soc/amd: unify SMBus supportAaron Durbin
The SMBus support is identical between stoneyridge and picasso. Unify on common support code. Change-Id: Ic3412c5ee67977a45c50b68f36acc45c3d560db5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-02-01soc/intel/tigerlake: Configure TCSS xHCI and xDCIWonkyu Kim
Configure xHCI, xDCI according to board design BUG=none BRANCH=none TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9c790cce8d6e8dfff84ae5ee4ed6b3379f45cb9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-31soc/amd/picasso: move to using smbus_host.h definitionsAaron Durbin
The SMBus function declarations were duplicated. Use the common ones provided by smbus_host.h. Change-Id: Ia8fec8f58d72690d73f2241e69b3ff05f74943a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38615 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-31soc/amd/picasso: use SMBus timeout in compilation unitAaron Durbin
The timeout is fixed and only used in one place. Put the assumption in the compliation unit utilizing the defintion. Change-Id: I93c061e74df6b4265fd1c61fc4669410ebc9554f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-31soc/amd/picasso: use SMBus speed in compilation unitAaron Durbin
The fixed bus speed of 400 kHz doesn't need to reside in a header file. Just move the assumption into the code itself. Change-Id: I8bb68607070d0daeae2ad3bcd79f49d5c20048fd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-31soc/amd/stoneyridge: move to using smbus_host.h definitionsAaron Durbin
The SMBus function declarations were duplicated. Use the common ones provided by smbus_host.h. Change-Id: Ic912b91daf79ecd2c276a383edcda563891cf643 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38222 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-31soc/amd/stoneyridge: use SMBus timeout in compilation unitAaron Durbin
The timeout is fixed and only used in one place. Put the assumption in the compliation unit utilizing the defintion. Change-Id: I7537549da90d0bc158e638c533e8e8b0f1e28a7d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38612 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-31soc/amd/stoneyridge: use SMBus speed in compilation unitAaron Durbin
The fixed bus speed of 400 kHz doesn't need to reside in a header file. Just move the assumption into the code itself. Change-Id: I426fe078909a9b725c1747380d69af31292b6d1e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38611 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-30soc/intel/common/systemagent: Add Kconfig guardAndrey Petrov
Looks like selecting SOC_INTEL_COMMON force-sets MMCONF_BASE_ADDR to some value which can't be overriden outside of soc/intel/common. So adding a non-SoC platform thats uses code from soc/intel/common is not possible. TEST=build test on wip platform Change-Id: Ia160444e8ac7cac55153f659f4d98f4f77f0d467 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Guckian
2020-01-30soc/intel/common/block/lpc: Add CMP-H LPC IDsGaggery Tsai
This patch adds CMP-H LPC IDs. TEST=Build an image and boot with discrete TPM chip. Enable measured boot and kernel could get the measured data from TPM chip. Change-Id: I7eac8b0514f79b47a05973210e2472dd1dc3d0ed Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38251 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-29soc/intel/skylake/acpi/dptf: Remove processor throttling controlsWim Vervoorn
The fwts method test reports errors on the methods implementing processor throttling control. The T states are not supported in coreboot at this moment. Remove the methods required by processor throttling control. They can be restored when the required support has been added to the SoC implementation. BUG=https://ticket.coreboot.org/issues/252 TEST=tested using fwts on facebook monolith. Found-by: fwts 19.12.00 Change-Id: Ib50607f60cdb2ad03e613d18b40f56a4c4a4c714 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-29amdblocks/biosram: Do small reformattingMarshall Dawson
Remove two blank lines and reorder functions by read/write sizes. Change-Id: I7bd6ed44546d49b65135a98e424a5669d90f2867 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38146 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-29soc/intel/tigerlake: Disable image clocksWonkyu Kim
TGL FSP does just pin mux for image clock pins by UPD and image clocks are controlled by ACPI(camera_clock_ctl.asl) under tigerlake SOC folder. Disable image clocks by UPD for bypassing FSP pin mux and do pin mux in gpio.c according to board design. BUG=none BRANCH=none TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I5aba5b2fb6deee231e3ec34c8dbc9972b01041f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38562 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28soc/intel/tigerlake: Enable DP ports according to board designWonkyu Kim
BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux from pinctl driver. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ia6e9271a11a1f9e6f98923772219ccc1e7daecda Reviewed-on: https://review.coreboot.org/c/coreboot/+/38528 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28drivers/spi/spi_flash: remove spi flash namesAaron Durbin
The names of each spi flash cause quite a bit of bloat in the text size of each stage/program. Remove the name entirely from spi flash in order to reduce overhead. In order to pack space as closely as possible the previous 32-bit id and mask were split into 2 16-bit ids and masks. On Chrome OS build of Aleena there's a savings of >2.21KiB in each of verstage, romstage, and ramstage. Change-Id: Ie98f7e1c7d116c5d7b4bf78605f62fee89dee0a5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-01-28commonlib: Add commonlib/bsdJulius Werner
This patch creates a new commonlib/bsd subdirectory with a similar purpose to the existing commonlib, with the difference that all files under this subdirectory shall be licensed under the BSD-3-Clause license (or compatible permissive license). The goal is to allow more code to be shared with libpayload in the future. Initially, I'm going to move a few files there that have already been BSD-licensed in the existing commonlib. I am also exracting most contents of the often-needed <commonlib/helpers.h> as long as they have either been written by me (and are hereby relicensed) or have an existing equivalent in BSD-licensed libpayload code. I am also relicensing <commonlib/compression.h> (written by me) and <commonlib/compiler.h> (same stuff exists in libpayload). Finally, I am extracting the cb_err error code definitions from <types.h> into a new BSD-licensed header so that future commonlib/bsd code can build upon a common set of error values. I am making the assumption here that the enum constants and the half-sentence fragments of documentation next to them by themselves do not meet the threshold of copyrightability. Change-Id: I316cea70930f131e8e93d4218542ddb5ae4b63a2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-01-26soc/intel/skylake: Update 64 bit SA DRAM bit fields as per datasheetSubrata Banik
This patch updates SA DRAM registers bit definitions as per SKL datasheet vol 2, doc 332688. TEST=Build and boot EVE and Soraka to OS. Change-Id: Ia32723444c044572fbcecce151d89e739e570b3b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-26soc/intel/skylake: Add _SEG/_UID name variablesSubrata Banik
TEST=Build and boot EVE and Soraka to OS. Change-Id: Ic765dc2a7a522872ee991e47e3608f60a0e6411a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38513 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-26soc/intel/skylake: Only reserve TPM area for !CONFIG_TPM_CR50 deviceSubrata Banik
As per PC client TPM specification, the TPM description contains the base address of the TIS interface 0xfed40000 and the size of the MMIO area is 20KB (0x5000). Hence ACPI used to reserve those fixed system memory from getting used by OS. Platform with TPM_CR50 doesn't require fixed SoC mapped memory hence additional reservation might not required. TEST=Build and boot EVE and Soraka to OS. Change-Id: Id02a2659ce42f705180370000df89d4f6b64afce Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38512 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25soc/intel/tigerlake: Add IPU in ACPIWonkyu Kim
Add IPU ACPI object for Camera ACPI. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I8c1ca9c053f0c8ef8d7c027c317c7af74d5f0f8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/38469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-25soc/intel/tigerlake: Configure ClkReq according to mainboard designWonkyu Kim
BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board from NVMe Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I14997e0a7d03bf1a97d115cbf0a7ad2603ef9953 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38285 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25soc/intel/tigerlake: Add GPIO helper functionShaunak Saha
This patch adds ASL methods like GRXS, GTXS, STXS and CTXS which are used to get, set and clear gpio values. We use ASL 2.0 syntax here for gpio.asl. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board Change-Id: I17e75ff2a7cb67e94669059a1ed9d73a720ebcb1 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38442 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25soc/intel/tigerlake: Fix GPIO communitiesShaunak Saha
GPIOs are divided into different communities. Each community consists of one or more GPIO groups. We need to configure the groups in coreboot so that they are mapped properly. GPIO comuinities in coreboot should match with the kernel gpio communities also. Kernel reads the ASL file from coreboot. This patch adds the proper community mapping in ASL code to match with kernel code. In gpio_soc_defs.c file we are indexing the groups correctly. In gpio.h file we define all the gpio devices as kernel populates sysfs with separate gpio device for each community. This patch is created based on Intel Tiger Lake Processor PCH Datasheet with Document number:575857 and Chapter number:27. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board. In /sys/kernel/debug/pinctrl verify INTC34C5:0<1-3> listing all the pins for each community. e.g., #cat /sys/kernel/debug/pinctrl/INT34C5:00/pins should list all the community 0 pins. Change-Id: I40c386db060d84c1b7fba9c587f960d6a92f84ba Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-01-24soc/intel/skylake: Remove unused ICH memory referenceSubrata Banik
TEST=Build and boot EVE and Soraka to OS. Change-Id: Ic7840ce264393b4a955f17b16f5e0f556e34a776 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38511 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-24soc/intel/skylake: Move pci_irqs.asl from SA to PCHSubrata Banik
SoC handles PCI IRQs programming inside PCH related ASL. TEST=Build and boot EVE and Soraka to OS. Change-Id: If95101193fa1b528dc64f57c0fc12f13f16d82b4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-24soc/intel/tigerlake: Enable SATAWonkyu Kim
Configure SATA FSP UPD according to mainboard design. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board with SATA memory Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9350d71d76cd3d449fd959b5398d5ac653bc459e Reviewed-on: https://review.coreboot.org/c/coreboot/+/38504 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-23soc/intel/common: Update SA bit fields as per EDSSubrata Banik
This patch updates system agent related registers bit definitions as per EDS. For example: As per CNL/ICL EDS MCHBAR register base is between bit 16-38 but coreboot programming was not aligned with EDS previously. CNL EDS doc number: 566216 Also provide provision to program 64bit values as per SA EDS definitions TEST=Dump MCHBAR in coreboot and ASL shows same 32 bit value. Change-Id: I37340408fe89c94ce81953c751c8d7e22bc81a42 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-22soc/intel/tigerlake: enable gpio dual route supportNick Vaccaro
Enable SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT for tigerlake. BUG=b:142961277, b:145494156 BRANCH=none TEST=none Change-Id: I1f785f410982f7d7598942f9b12196851e77c240 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37629 Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22soc/intel/tigerlake: Update fsp_params for TGLSrinidhi N Kaushik
Add initial fsp upd settings for TGL, both romstage and ramstage upd's to support basic build and boot of TGL RVP. - Add Silicon upd settings which includes * Serial IO/UART settings * Graphics settings * USB2/USB3 settings - Add Romstage upd settings which includes * Pcie Root port settings * IGD initialization * Hyper Threading settings * SMBus controller settings * Debug probe settings BUG=none BRANCH=none TEST=Build and boot Tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I16df66451fd3a681df1222d283d97dd6bdaff0e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37960 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22soc/intel/tigerlake: Update GPIO configRavi Sarawadi
GPIOs are divided into different communities. Each community consists of one or more GPIO groups. We need to configure the groups from coreboot so that they are mapped properly. GPIO communities should be properly configured in GPIO_CFG and MISCCFG registers. GPP_* defines in gpio_soc_defs.h are configured in GPIO_CFG register while the PMC_GPP_* in pmc.h are used to configure the MISCCFG registers. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board. Verified that after setting the gpe from devicetree the GPP_EN register for that community gets updated setting that specific bit. From the iotools i checked that GPE_EN register for that community is updated with that specific bit set to 1. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I585100375feee39b5a9105bdf6d9f5ca3a5bb2fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/37427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-01-22soc/intel/common: Add Elkhartlake Device IDsTan, Lean Sheng
Add Elkhartlake CPU, SA and PCH IDs. EHL PCH is code named as MCC. Also add a MCH ID (JSL_EHL) which is shared by both JSL and EHL SKUs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I03f15832143bcc3095a3936c65fbc30a95e7f0f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38489 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22soc/intel/tigerlake: Update interrupt infoWonkyu Kim
Update interrupt header and interrupt mapping per Intel Silcon reference code. Need to match pci_irqs.asl with FSP setting which followed by PCH BIOS spec. Reference PCH BIOS spec#613495 https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/ClientOneSiliconPkg /IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/PeiItssPolicyLibVer2.c BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Iffc4efad4d0aa55fc0de88d7fe32c0356dbc3c60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38258 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22{soc,southbridge}/*/*/acpi: Add possibility to disable S4Wim Vervoorn
Some boards don't support S3 or S4. The S4 state can't be removed from the available sleep states. Add a config item that allows removal of the S4 state from the list of available sleep states. The S4 state can be removed by selecting the item on board level. For the AMD chipsets the SSFG mask is updated to remove the S4 state. BUG=N/A TEST=build Change-Id: Id802c4cc40308ddf39e99e7f226d55e0e020f0c9 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38431 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-20soc/amd/picasso: Add SMMSTORE supportMarshall Dawson
Add SMMSTORE support for saving EFI NVRAM variables in conjuction with Tianocore payload. Test: none, as this duplicates tested functionality in amd/stoneyridge. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Id05b33edf949611c3f9eac94e7b63a4266c6c4d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-01-20soc/amd/stoneyridge: Add SMMSTORE supportMatt DeVillier
Add SMMSTORE support for saving EFI NVRAM variables in conjunction with Tianocore payload. Test: build/boot several google/kahlee variants, test manipulation and persistence of Tianocore bootorder variables. Change-Id: Ida604a44d1fa5288e96dbe05de1f847e597cc95d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-18soc/intel/cannonlake/bootblock: Add CML-S 2/4-Core MCH IDsGaggery Tsai
This patch adds CML-S 2 and 4-Core MCH IDs and fix wrong ID for 10-Core ID. Change-Id: I30f6c8a5234b7754d984b598bf7bae103ec9712e Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-18soc/intel/cannonlake: Add chip config for SATA strengthJamie Chen
Add config to chip.h for tuning SATA gen3 strength. BUG=b:147351936 BRANCH=none TEST=build successful in puff Change-Id: I4dcd23834fa3c01c1d88697a7bb8cf361709b62e Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38432 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/tigerlake: Update ACPI filesRavi Sarawadi
Add and update ACPI files for Tiger Lake SoC Use ASL2.0 code syntax for new acpi(camera_clock_ctl.asl) Reference PCH EDS#576591 vol1 rev1.2 PCH EDS#575857 vol2 rev1.0 BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Ib82156830273c2937f5f02713ed7dd27da41c857 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37781 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/tigerlake: Update pci dev definitionWonkyu Kim
This change updates pci dev definition according to TGL EDS. Add GSPI3 case in chip.c according to updated pci dev definitions. Reference TGL Process EDS#575681 rev1.0 TGL PCH EDS#576591 rev1.2 BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I4717ac3cc877b13978b18ada504740512f10c709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38341 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/common: Fix typosSridhar Siricilla
Fix typos and replace spaces with tab in macro definitions. TEST=Build and Boot hatch board Change-Id: I43b2df7defc97aaeb7c8c9dfbe08ce78ba81f39b Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38384 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/common/cse: Add description for macrosSridhar Siricilla
Below changes are done in the patch: 1. Remove unnecessary lining, and replace spaces with tabs 2. Add description for macros 3. Correct comment mentioned for wrapper #ifndef TEST=Build and Boot hatch board Change-Id: I630446234321e7998ab42f8506a58b16e9ce4eb0 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-18soc/intel/tigerlake: Update chip filesRavi Sarawadi
Update chip files to include : - Update chip.c based on TGL FSP - Update chip.h based on TGL FSP - Update Kconfig : Define CONFIG_MAX_PCIE_CLOCKS for chip.h update - Update pmc_utils.c and JSL devicetree for build failure Reference PCH EDS#576591 vol1 rev1.2 BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Ie1518a7ffa69079fe82232afe229d9e1ffe29067 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37783 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/common/cse: Add consistent HECI command id/group id namingSridhar Siricilla
Below changes are done: 1. Consistent HECI command/group ID naming. 2. Rename macros to match with Intel ME BIOS Spec. 3. Move command ids, group ids and related macros into cse.h 4. Add description for structure members. TEST=Build and Boot hatch board. Change-Id: Ia902095483d5badf778d0c1faa6bf8cc431f0e50 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-18soc/intel/{skylake,common}/acpi/dptf/thermal.asl: Prevent iasl remarksWim Vervoorn
Prevent iasl remarks about unused parameters. BUG=N/A TEST=build Change-Id: I54fa4712e618038fdd5a96c2012c2ec64ca34706 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 09:31:06 +0000