| Age | Commit message (Collapse) | Author |
|---|
|
This patch drops the unused `PCH_DEV_SLOT_LPC` macro from the
Tiger Lake SoC PCI device list.
BUG=none
TEST=Able to build and boot volteer, google board.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27a2f31aa706c4d76e9f0db202422bc129368959
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
SCP core 2 is enabled for MT8195 camera feature. It requires the same
register access permission as SCP core 1. Therefore, we configure the
same domain ID for both cores.
BRANCH=cherry
BUG=b:193814857
TEST=cherry boot ok
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Change-Id: Idf335593936b12c083c926a252fa99c3b76cda6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64575
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All targets now use cbmem for the BERT region, so the implementation can
be common.
This also drops the obsolete comment about the need to have bert in a
reserved region (cbmem gets fixed to be in a reserved region).
Change-Id: I6f33d9e05a02492a1c91fb7af94aadaa9acd2931
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This removes the need to align BERT so that TSEG remains aligned.
Change-Id: I21b55a87838dcb4bd4099f051ba0a011a4d41eea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since the FIT pointer is patched at runtime there is no guarantee that
the pre-defined one will match the patched one. Add a check and print a
warning at runtime if both addresses (pre-defined and patched) do not
match as in this case an offline computed hash for the bootblock will
differ from the runtime one.
Change-Id: Ib1b02ec43af183caa9f5b08b3c485879b423c40f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Before TXE releases the CPU out of reset a pointer to the constructed
FIT in SRAM is patched into the loaded bootblock at offset 4G - 64B.
Since this patched bootblock gets measured during runtime it will not
match the one that is potentially measured from the coreboot image.
This patch adds a dedicated fit.c file for Apollo Lake where the FIT
pointer is already set to the address TXE will be using at runtime.
Test=Compare sha256 sum from coreboot runtime and coreboot.rom of the
bootblock and make sure they match.
Change-Id: Ia0fd2a19517c70f50ef37e6a2dc2408bae28df10
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On Apollo Lake the bootblock is stitched into the IBBL IFWI region at
build time. At execution time TXE loads this IBBL into a shared SRAM
(which is read-only in this phase) and maps it at 4 GiB - 32 KiB. Then
the CPU starts to operate from this shared SRAM as it were flash space.
In order to provide a reliable CRTM init, the real executed bootblock
code needs to be measured into TPM if VBOOT is selected. This patch adds
the needed code to do this.
Change-Id: Ifb3f798de638a85029ebfe0d1b65770029297db3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On platforms where the bootblock is not included in CBFS anymore
(because it is part of another firmware section (IFWI or a different
CBFS), the CRTM measurement fails.
This patch adds a new function to provide a way at SoC level to measure
the bootblock. Following patches will add functionality to retrieve the
bootblock from the SoC related location and measure it from there.
In this way the really executed code will be measured.
Change-Id: I6d0da1e95a9588eb5228f63151bb04bfccfcf04b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add the boot flash MMIO window to the resources to report this region as
reserved to the OS. This is done to stay consistent with the reserved
memory ranges by coreboot and make the OS aware of them.
As x86 systems preserves the upper 16 MiB below 4G for BIOS flash
decoding use the complete window for reporting independent of the
actually used SPI flash size. This will block the preserved MMIO window.
Change-Id: Ib3a77e9233c3c63bad4de926670edb4545ceaddf
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch drops the unused `PCH_DEV_SLOT_LPC` macro from the
Alder Lake SoC PCI device list.
BUG=none
TEST=Able to build and boot taeko, google board.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib2ae40fcc4499de34534f27f03b4c359c37409e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Since the fast SPI controller is hidden on Apollo Lake the OS cannot
probe it and is therefore unaware of the reserved resources assigned in
coreboot. Select 'FAST_SPI_GENERATE_SSDT' to enable SSDT creation to
report the reserved resources to the OS.
Change-Id: I23e77a0a01141dc4f299988d19509e6df555a654
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This patch provides the possibility for EHL based boards to disable
RAPL settings via SOC_INTEL_DISABLE_POWER_LIMITS config switch.
On Elkhart Lake the way via setting relevant MSR bits does not work.
Therefore the way via MCHBAR is choosen.
Test:
Check MCHBAR mapped registers (MCH_PKG_POWER_LIMIT) on mc_ehl1.
Change-Id: I5be6632b15ab8e14a21b5cd35152f82fec919d9f
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
EHL MAC side expects a rising edge signal for an IRQ. Based on the
mainboard wiring it could be necessary to change the interrupt polarity.
This patch provides the functionality to invert a falling edge signal
that comes from an external PHY. The inverting can be activated via
devicetree parameter.
Change-Id: Ia314014c7cacbeb72629c773c8c0bb5f002a3f54
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I37d31598e87e5b625ded3186980e3aba7dcf6440
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Hook Timer8254ClkSetting to `legacy_8254_timer` cmos option. If that
isn't set, fallback to the `USE_LEGACY_8254_TIMER` Kconfig option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f91cc2c8f48e9da47399059386092314b631b08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
If the SPI controller is hidden from the OS (which is default on Apollo
Lake) then OS has no chance to probe the device and therefore can not be
aware of the resources this PCI device occupies. If the OS needs to move
some resources for a reason it can happen that the new allocated window
will be shadowed by the hidden PCI device resource and hence causing a
conflict. As a result this MMIO window will be inaccessible from the OS
which will cause issues in applications. For instance on Apollo Lake
this causes flashrom to stop working.
This patch adds a SSDT extension for the PCI device if it is hidden from
the OS and reports the occupied resource via ACPI to the OS. For the
cases where the device is hidden later at coreboot runtime and therefore
is not marked as hidden in the PCI device itself a Kconfig switch called
'FAST_SPI_GENERATE_SSDT' is introduced. It defaults to 'no' and can be
set from SOC code to override it.
Since there is no defined ACPI ID for the fast SPI controller available
now, the generic one (PNP0C02) is used.
Test: Boot mc_apl4 and make sure flashrom works again.
Change-Id: Ia16dfe6e001188aad26418afe0f04c53ecfd56f1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Use defines for a better reading of the code.
Change-Id: I8e696240d649c0ea2341b8f04b62eebffebc1d57
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64519
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
By right if PseTsnGbeSgmiiEnable is disable,
PseTsnGbePhyInterfaceType should use RGMII setting.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: If593a5534716a9e93f99cb155fb5e86e12b1df17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
There are efforts to have bootflows that do not follow a traditional
bootblock-romstage-postcar-ramstage model. As part of that CBMEM
initialisation hooks will need to move from romstage to bootblock.
The interface towards platforms and drivers will change to use one of
CBMEM_CREATION_HOOK() or CBMEM_READY_HOOK(). Former will only be called
in the first stage with CBMEM available.
Change-Id: Ie24bf4e818ca69f539196c3a814f3c52d4103d7e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
In order to pass PCIe base address to payloads, implement pcie_fill_lb()
to fill coreboot table with PCIe info.
TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
== NVME IDENTIFY CONTROLLER DATA ==
PCI VID : 0x15b7
PCI SSVID : 0x15b7
SN : 21517J440114
MN : WDC PC SN530 SDBPTPZ-256G-1006
RAB : 0x4
AERL : 0x7
SQES : 0x66
CQES : 0x44
NN : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006
BUG=b:178565024
BRANCH=cherry
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Ib2988694f60aac9cbfc09ef9a26d47e01c004406
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Reuse existing SMBus code from southbridge/intel/common/smbus_ops.h.
Change-Id: Iea4f6886bb49590f7f96abbfbe631ac9d4dda902
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64432
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow this commit 95986169f (soc/intel/alderlake: Skip FSP Notify APIs)
to skip FSP Notify APIs.
Elkhart Lake SoC deselects Kconfigs as below:
- USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
- USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
to skip FSP notify APIs (Ready to boot and End of Firmware) and make
use of native coreboot driver to perform SoC recommended operations
prior booting to payload/OS.
When deselecting these Kconfigs, cse_final_ready_to_boot() and
cse_final_end_of_firmware() in the common cse driver will be used
instead as required operations to perform prior to booting to OS.
Check out this CL for further info:
commit 90e318bba (soc/intel/common/cse: Add `finalize` operation for
CSE)
Additionally, create a helper function `heci_finalize()` to keep HECI
related operations separated for easy guarding again config.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I477c204233f83bc96fd5cd39346bff15ed942dc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove two redundant `void *` casts in `clrsetbits32()` calls. In
addition, preemptively retype the `io_mem_base` variable in order
to avoid having to add casts in future commits.
Change-Id: Iae9c8189a6f8cd29181c52c2241789c6d392d77b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This patch adds the support to enable the external V1P05/Vnn rails
in S0 state via devicetree.
BUG=b:223102016
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I555e5607af15a5f5d83ef74321b1b71f17cca289
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This patch updates the VccIn Aux Imon IccMax for ADL-N to SOC SKU
specific value of 27A.
Kit: 646929 - ADL N Platform Design Guide
BUG=b:223102016
TEST=Verified that VccIn Aux Imon IccMax value is set to 27mA.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: If09cd1112fac9b30ff04c45aa5a6062c2513c715
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch configures the SKU specific power delivery parameters for the
VR domains for ADL-N.
+--------------+-------+-------+-------+-------+-----------+--------+
| SKU |Setting| AC LL | DC LL |ICC MAX|TDC Current|TDC Time|
| | |(mOhms)|(mOhms)| (A) | (A) | (msec)|
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 081 | IA | 4.7 | 4.7 | 53 | 22 | 28000 |
+ +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 29 | 22 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 081(7W) | IA | 5.0 | 5.0 | 37 | 14 | 28000 |
+ +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 29 | 14 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 041(6W) | IA | 5.0 | 5.0 | 37 | 12 | 28000 |
+ Pentium +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 29 | 12 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 041(6W) | IA | 5.0 | 5.0 | 37 | 12 | 28000 |
+ Celeron +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 26 | 12 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
|ADL-N 021(6W) | IA | 5.0 | 5.0 | 27 | 10 | 28000 |
+ +-------+-------+-------+-------+-----------+--------+
| | GT | 6.5 | 6.5 | 23 | 10 | 28000 |
+--------------+-------+-------+-------+-------+-----------+--------+
Kit: 646929 - ADL N Platform Design Guide -> Power_Map_Rev1p0
BUG=b:223102016
TEST=Boot and verify the UPD values are configured properly for ADL-N SKU's.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I3d6ae20323d3e859f52228822d4cbad143921a37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
There are two APL specific config switches for RAPL and min. cpu clock
(APL_SKIP_SET_POWER_LIMITS, APL_SET_MIN_CLOCK_RATIO). These switches
could be used in future in other CPU platforms. Move them to common code
instead of having them just for one SOC.
Test: Make sure that the clock ratio (MSR 0x198) and the RAPL settings
(MSR0x610) do not change with this patch applied on mc_apl{1,4,5}
mainboard.
Change-Id: I3d63d1b9b6c96586a3c20bf8c1d8001b1d7c4bed
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Remove devicetree options that aren't used anywhere in the code.
Change-Id: I7eace61079e14423325332d277fdda4f986fd133
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64403
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Program the `SmbusEnable` FSP UPD according to the SMBus PCI device's
state in the devicetree. This avoids having to manually make sure the
SMBus PCI device and the `SmbusEnable` setting are in sync.
Change-Id: I275a981f914a55dc57a75e7d436912ff0255a293
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64402
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The psp_notify_boot_done call is done at the entry of BS_PAYLOAD_BOOT,
so it's not guaranteed that the psp_set_spl_fuse call is done before the
psp_notify_boot_done call. Moving the psp_set_spl_fuse call makes sure
that it's done before the psp_notify_boot_done call. This also brings
the psp_set_spl_fuse call in line with the enable_secure_boot call that
sends the PSB fusing command to the PSP.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id76b462608c3d788cd90e73a64d18c8e8b89dbfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Hook up the hyper-threading setting from the FSP to the option API so
that related mainboards don't have to do that. Unless otherwise
configured (e.g. the CMOS setting or overriden by the mainboard code),
the value from the Kconfig setting `FSP_HYPERTHREADING` is used.
Also, remove related code from the mainboard kontron/bsl6, since it is
obsolete now.
Change-Id: I1023d1b94acb63f30455c56b394b68059deaaa16
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
mcfg->usb_phy is a pointer to a struct usb_phy_config. The config is
constant. Changing a constant is undefined behavior, so create a local
static instance of usb_phy_config that can be modified safely.
Change-Id: If9b76b869a5b0581f979432ce57cc40f1c253880
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add and use defines instead of magic values in fsp_m_params.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0e33eb0af5310ab4610ea8951688464c4960260
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64126
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use sizeof instead of having a hard-coded struct length.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85dc2fce11d9a670b2037d8a6a694177cfaa2177
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This patch provides the functionality to change the TSN GbE MAC
addresses. Prerequisite for this is a mainboard specific function that
returns a matching MAC address.
A test was performed with the next patch in the series, which enables
the TSN GbE driver for mc_ehl2 mainboard.
Change-Id: I2303a64cfd09fa02734ca9452d26591af2a76221
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
To be able to make EHL Ethernet GbE-TSN Controller configurable, a
driver is required. Functionality comes in following patches.
Change-Id: I7522914c56b74486bb088280d2686acf7027d1d3
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add Raptor Lake specific CPU, System Agent, PCH, IGD device IDs.
References:
RaptorLake External Design Specification Volume 1 (640555)
600/700 Series PCH External Design Specification Volume 1 (626817)
Change-Id: I39e655dec2314a672ea63ba90d8bb3fc53bf77ba
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
|
|
Starting with Meteor Lake SoC, the PCR/DMI interface to program GPMR
is replaced with IOC (I/O Cache), hence, this patch implements IOC
driver to support that migration.
Reference: 643504 MTL FAS section 7.5.2
TEST=Build and boot to OS for TGL RVP and MTL PSS
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I768027c2ca78310c03845f70f17df19dc8cd0982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63198
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The MP_IRQ flags can be used in the MP table and the ACPI MADT table.
Move them into acpi.h to avoid pulling in the full mpspec.h which is
only available on x86.
BUG=b:218874489, b:160595155
TEST=Build
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4f1091b7629a6446fa399720b0270556a926401a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63845
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The fast SPI controller (usually handling the boot NOR flash) is a
different controller type than the generic SPI controllers as it
provides access to the boot flash and usually is not used for generic
SPI slave connections.
Though there is common code for the fast SPI controller it currently do
not uses the PCI driver structure. This patch adds the PCI driver
envelope to the fast SPI driver and moves Apollo Lake as the first
platform to this driver.
Change-Id: I31bf39ec1c622db887dec9ca8623a7f282402849
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add Platform Secure Boot (PSB) enablement via the PSP if it is not
already enabled. Upon receiving psb command, PSP will program PSB fuses
as long as BIOS signing key token is valid.
Refer AMD PSB user guide doc# 56654, Revision# 1.00, this document is
only available with NDA customers.
Change-Id: I30aac29a22a5800d5995a78c50fdecd660a3d4eb
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The postcar frame can now be a local variable to that function.
Change-Id: I873298970fff76b9ee1cae7da156613eb557ffbc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This reduces boilerplate postcar frame setup.
Change-Id: I8e258113c90ee49864ceddf36ea296ba6f83afe4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Setting up postcar MTRRs is done when invd is already called so there
is no reason to do this in assembly anymore.
This also drops the custom code for Quark to set up MTRRs.
TESTED on foxconn/g41m and hermes/prodrive that MTRR are properly set
in postcar & ramstage.
Change-Id: I5ec10e84118197a04de0a5194336ef8bb049bba4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54299
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If9ae375629c8af3d32b4c5493b5d63203e8847aa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
GNVS is more fragile as you need to keep struct elements in sync with
ASL code.
Change-Id: I2cd5e6b56e4a0dbbb11f4a0ac97e8f84d53b90ec
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The "No memory dimm at address" line in get_spd_sn and get_spd fucntion
have different format of SPD address.
get_spd_sn shows a 8-bit address format but get_spd shows a 7-bit
address format when there is no DIMM connected. It can be confusing
when debugging.
Change-Id: I46a006f4024b12d27ae0a933b7c40515034d5d64
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
There were 3 different functions in gpio.c file which used to
get gpio group and pin information separately through function
calls.
Since these are static function, we can modify argument to
pass group and pin information from parent/calling function.
This will reduce redundant work of getting information 3 times
separately.
BUG=None
BRANCH=None
TEST=code compiles and correct information is passed to functions.
Check by using pin information on Brya.
Change-Id: Ie92be8c22838ebc5e831be58545e2023eecfff24
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Since coreboot locks GPIO registers after GPIO configuration, OS is not
able to program GPE_EN register to program wake events. This causes
the issue of event not getting logged into event log (since GPE_EN bit
is not set).
GPE_EN register programming is required for the GPIO pins which are
capable of generating SCI for the system wake. Elog mechanism relies
on GPE_EN and GPE_STS bit to log correct wake signal.
This patch add supports to program GPE_EN register before coreboot locks
the GPIO registers. Note that coreboot will only program GPE_EN bits for
GPIO capable of generating SCI.
This will help resolve issue where we don't see wake event GPIO in event
log.
BUG=b:222375516
BRANCH=firmware-brya-14505.B
TEST=Compile code for Brya and see GPE_EN bits set from the kernel console
Change-Id: I27e525f50c374c2cc9675e77eaa7774683a6e7c2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
coreboot needs to set GPE_EN bit for the GPIOs which are wake capable
from s0ix/sleep. Due to GPIO locking mechanism, coreboot/OS will not
be able to write GPE_EN register post GPIO has been locked.
This patch adds support in SoC code to provide correct offset for
GPE_EN and GPE_STS registers to the common code.
Plan is to use this offsets to set GPE_EN bits before GPIO locking
in coreboot which will be part of subsequent CL.
BUG=b:222375516
BRANCH=firmware-brya-14505.B
TEST=Check if code compiles for Brya and correct offset values are printed.
Change-Id: I6b813b30b8b360f8eccbf539b57387310e380560
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
By using mp_run_on_all_cpus_synchronously to run APs MTRR init, it
gurantees the BSP will run post_cpus_add_romcache until all APs finishes
_x86_setup_mtrrs task.
BUG=b:225766934
TEST=Test on redrix and found the MTRR race condition on AP/BSP is gone.
Change-Id: I1fd889f880a0c605e6c739423a434d2adbc12d26
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com>
Change-Id: Ib795f25abe5bbd95555b68af39c637d7c93aa819
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64251
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change matches what we already do for cezanne. It will allow the
GPIO controller to work correctly in windows.
BUG=b:175146875
TEST=Boot windows and verify GPIO controller binds correctly and touch
screen works. Also boot linux and verify touchpad still works.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I998e286de18d3e3f8b2fe610d17aef94a6cf5477
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/pae.h>' -- src/) <(git grep -l 'memset_pae\|MEMSET_PAE_\|MAPPING_ERROR\|map_2M_page\|paging_identity_map_addr\|paging_enable_for_car\|paging_set_default_pat\|paging_set_pat\|PAT_ENCODE\|PAT_UC_MINUS\|PAT_WB\|PAT_WP\|PAT_WT\|PAT_WC\|PAT_UC\|paging_set_nxe\|paging_disable_pae\|paging_enable_pae\|paging_enable_pae_cr3' -- src/)
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: If0f69fa8fe4a336b4e4d2a148d1e7a911af3c2c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Found using:
diff <(git grep -l '#include <cf9_reset.h>' -- src/) <(git grep -l 'RST_CNT\|FULL_RST\|RST_CPU\|SYS_RST\|do_system_reset\|do_full_reset\|cf9_reset_prepare\|system_reset\|full_reset' -- src/) |grep "<"
Change-Id: I093d8412e14ce81b462fb9a7ccb3a2a93ae760a6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: I25d112941db8214a7e450de5fb512ef8c2c5f5e2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: I322a94186b92033fc27ba97785b55df09aa317f7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Clang does not like array declarations inside plain switch cases. There
are 2 options to fix this: use a block inside the switch statement, or
declare it outside the switch statement. This does the latter.
Change-Id: I9a02136fd63ac171b2bec4647c30c7eece930246
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The bootblock is loaded from IFWI so there is no need to have it in
cbfs.
Also remove the FIT handling as that is also handled by the IFWI.
TESTED: up/squared still boots
Change-Id: I8e70e080765dd7306074a8cf71c8795b8fbbb8a2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63225
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2b02bcecda2257f191c0d0fc9935b1eb673ab3d2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
CID 1488814: Uninitialized variables (UNINIT)
Commit c66ea98 introduced an issue after static analysis on merge.
Because every APIC is associated with a CPU, this did not result in
any issues at runtime but should be fixed/cleaned up. Now, the path
name is initialized to null.
Fixes: Coverity CID 1488814, commit c66ea98
TEST=Built on brya
Change-Id: I0cfc8fd7a0c39e6610a9361630e3755293084f3d
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I3c8c1787c77ed08942c6550ca556875904be2fa2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64242
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2acad0763d19b50c02472dfdd33084acbafe4c84
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Ifc0374ed49ecefc57dec8e72e73bac031838a9f5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64238
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2f89d11c163f56163d5c361a3edad14418bf9fa7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This fixes building with clang.
Change-Id: I7405f031298a35589e435e888af911d916662d23
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63069
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang does not like static asserts on integral constant expressions.
Change-Id: If5890a357ed95153d8ae2efa727c111b05bc6455
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Implement sub-function 1 (Get Device Constraints)
of the Low Power S0 Idle Device-Specific Method (_DSM).
This provides a way in which to describe various devices required
D-states to enter LPM (S0ix). The information can be used to help
in diagnostics and understanding of S0ix entry failure.
Values were derived from Intel document 595644 (rev 0.45) and
the ADL FSP sample ASL.
This implementation adds support for ADL. Other SoC's could be
ported to be included as well. If they aren't, they will default
to the existing behavior of a single hardcoded device to ensure
compatibility with Windows.
TEST=Built and tested on brya by verifying SSDT contents
Change-Id: Ibe46a0583c522a8adf0a015cd3a698f694482437
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lance Zhao
|
|
mcfg->usb_phy is a pointer to a struct usb_phy_config. The config is
constant. Changing a constant is undefined behavior, so create a local
static instance of usb_phy_config that can be modified safely.
Change-Id: Iedbc49109dcd1da9198fcb2a8f84e2b567cd8f86
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64130
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add and use defines instead of magic values in fsp_m_params.c. The
values will be updated to match the Sabrina FSP in a follow-up commit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I91da9e9d2b95e169dd73153766f24cf8afbfa4ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64128
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use sizeof instead of having a hard-coded struct length.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c39d770a7719e30572e71b6a6c24fa2ad4a9426
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The bootblock.elf file gets embedded in the BIOSPSP part and loaded by
the PSP in dram. The top aligned bootblock in cbfs is unused.
Tested on Cezanne/Guybrush.
Change-Id: I72f0092e0e3628b388f6da6a417c2857a510b187
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This also adds messages when adding the files.
Change-Id: Ie812084cc243a18cbc2913804ef2190dd9d6ed9b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I41bbdabf7b846386651e64f4afb5b7b9fb38e1cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
The first target for the add_intermediate targets is always
$(obj)/coreboot.pre.
Change-Id: Iea2322ca1abd43900f3631b7965f07fed4235ca0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Clang needs an attribute not a comment.
Change-Id: I78f87d80bd4f366ed6cfa74619dd107ac61bc935
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Clang complains about this.
Change-Id: I421d6c5daa373d1537e4ac2243438e7f1f6208d1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63067
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's expected that the mismatch logs will be shown when doing
calibration for spmi clock. If it is failed to do calibration for spmi
clock for all data, the system will enter "die". Therefore, we adjust
the log level from BIOS_ERR to BIOS_INFO.
BUG=b:231531254
TEST=emerge-cherry coreboot
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I148b4aeaaeb10e1c269a8eccbb19e8d8e17e40ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64090
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PMIC_CPSDSA4[4:0] controls the power-down at the specified time slot.
Setting it to 0xA would cause an extra delay of 20ms compared to 0xF.
The value of time slot is from 0x0 to 0x1F which represents the delay
when reset occurs.
To avoid the delay, change the value from 0xA to 0xF.
This modification is based on chapter 3.7 in the MT8186 functional
specification.
BUG=b:218630683, b:218630684
TEST=the power-off waveform is correct.
Signed-off-by: zhiyong tao <zhiyong.tao@mediatek.corp-partner.google.com>
Change-Id: I537fe87740f0f8c25b923d7d536e81503b71762b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64038
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This avoids compiler warnings on 64bit builds that complains about
casting pointer to non matching integer size.
Change-Id: I29fdb73ae1c0508796a21b650bf4fd1ac6688021
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit 198cc26e4951b3dbca588286706b7df562c45d42 (soc/amd/common/block/
psp/psp_gen2: use SMN access to PSP) changed how the PSP registers are
accessed. Since the new method doesn't need to rely on a MMIO base
address to be configured, the read will always be successful and so
soc_read_c2p38 doesn't need to return an error status and can directly
return the value instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1abace04668947ba3223a107461a27dddc0a9d83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
A few ACPI device path name handlers are missing. Add handling
to ensure that these names are returned during acpi_device_path()
calls.
TEST=Built and tested on brya
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I37d6dd5df921c931af72dd469c3f4067c61b0df3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The eSPI decode range defines aren't and shouldn't be used directly from
outside of the common AMD eSPI code which provides functions to abstract
the register access, so move the defines from amdblocks/espi.h to
espi_def.h inside the common AMD LPC/eSPI support directory to limit the
visibility. The special I/O range decode bits need to stay in
amdblocks/espi.h since those are used in the devicetree. Also update the
indentation in espi_def.h so that the defines line up properly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic4ea30a1a6f10e94d88bf3b29f86dee2da6b39b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64053
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Sabrina has more eSPI decode ranges than Picasso or Cezanne. Those
registers are however not in one block where it's easy to calculate the
addresses of a register from the index of the decode range. Within one
group of decode range registers it's still easy to calculate the
register address, so move the base address from within the macro to the
instantiation of the macro as a preparation for adding the support for
the additional ranges.
TEST=Timeless build results in identical binary for Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id309d955fa3558d660db37a2075240f938361e83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Add an enum for `DdiPortXConfig` devicetree options. Note that setting
these options to zero does not disable the corresponding DDI port, but
instead indicates that no LFP (Local Flat Panel, i.e. internal LCD) is
connected to it.
Change-Id: I9ea10141e51bf29ea44199dcd1b55b63ec771c0a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
This patch calls into the PMC IPC function that informs about PMC
enumeration.
Note: Alder Lake FSP Notify Phase 1 callback missed to send this PMC
IPC, hence, this patch is considered as an improvement over FSP Notify
Phase API.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS without any PMC IPC
error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I43cfad25a5861c5aa5dae293ff42c9cefe862ea2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch sends an IPC to PMC to inform about PCI enumeration.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I77d428f9501feaccab8bb431090d10ce8d3af9b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
pmc_prev_sleep_state() isn't handling the case where acpi_sleep_from_pm1()
returns ACPI_S4. Pass that value along so it can get set as a
prev_sleep_state. Without this, consumers see prev_sleep_state as 0
and always treat resume as a cold boot. With this, consumers can
correctly do behavior specific to S4 resume, like skipping the
disconnect IPC command to the PMC on Alderlake systems.
BUG=b:230031158
TEST=Resume from S4 on Primus4es
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: I3fb3dc428a749db80293e51a04a2096514a7b689
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The per-file hash for CBFS_VERIFICATION, stored as a CBFS file
attribute, would increase the total RO metadata size by 75% (3796->6656
for corsola). Therefore, in order to make RO metadata cache fit into
CBFS_MCACHE, enlarge it from 8K to 16K.
Adjust the memlayout by decreasing the DRAM_INIT_CODE from 196K to 184K
(only 160K needed for now), and moving VBOOT2_WORK region to L2C. Also
shuffle the regions in SRAM with better comments.
BUG=b:229670703
TEST=emerge-corsola coreboot
TEST=Enabled CBFS_VERIFICATION and booted kingler into kernel
BRANCH=none
Change-Id: I8e07eb9fae1644a0fbfbdc599ca0a0e11bbe54b5
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Since we can't rely on the MMIO base address in the PSP_ADDR_MSR MSR to
access the PSP mailbox registers, switch to using the SMN mapping of the
PSP mailbox registers. The PSP SMN base address is taken from the amdgpu
driver in the Linux kernel.
BUG=b:229779018
TEST=Mandolin still boots successfully and there are no errors/warnings
about possibly PSP-related things.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9d17e523e9ae8d8e14ecedc37131a81f82351487
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64034
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use common ASL defines for POST code handling.
Change-Id: I5b4c11860a8c33e56edaea0f6de378cbaa63a8c5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63989
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move ASL POST code declarations into a common file to avoid redundancy.
Also, provide a dummy implementation when `POST_IO` is not enabled, as
the value of `CONFIG_POST_IO_PORT` can't be used.
Change-Id: I891bd8754f10f16d618e76e1ab88c26164776a50
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
CORE_2_PSP_MSG_38_OFFSET and CORE_2_PSP_MSG_38_FUSE_SPL are only used in
psp_gen2.c, so move them into this file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67cc2ff63d1c0322b514521975f3ce0f9b1cf5b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
ADL-S CPU has maximum 3 PCIe interfaces when the x16 link is bifurcated
into two x8 links. ADL-S PCH has up to 28 PCIe Root Ports, 18 CLKOUT and
CLKREQ signals. ADL-S CPUs do not have Thunderbolt.
Based on the Intel DOC #619501 and #619362.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I408c815d5a43c081beb3f84d795c2b863ce33eb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Notify IOM to enable or disable TBT displays on S0ix exit and entry
respectively.
Change-Id: I9f49d8e30fe8e8b335128e53d71ef902328f031a
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add display on and off notifications which call mainboard hooks if
present. This allows to handle some board specific functions in user
absence or presence (when display goes off from inactivity or on from
activity).
TEST=Use Display on/off notification on Clevo NV41 to tell EC about
laptop inactivity. It is necessary to properly handle S0ix entry (stop
the fans and start blinking the power led).
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: Ie80f631ecffa74467ab6d6162e552ba977f7e3f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
I find it difficult to constantly decode the registers when reading
them. Let's print out something that's easier to parse.
BUG=b:228289365
TEST=boot guybrush and see status codes printed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I6c9d98cf43f340cf50e12c93b4c35187de9bb750
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Silently failing makes it hard to debug when something goes wrong.
BUG=b:228289365
TEST=build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7423a7011e7656414155386c014a9a0f2fad4abf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Based on the datasheet, we can safely increase the SPI frequency of
sc7280 to 50 MHz.
BUG=b:190231148
BRANCH=None
TEST=build and boot BIOS with this config on herobrine boards
Change-Id: I84420d7d8ab0cb979fc606fcf05147197bc51c35
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The MT8186 platform fails to suspend due to premature wakeup by USB.
In MT8186, we use low level latch to keep USB wakeup signal. However,
hardware could latch a wrong signal if it debounces more than one time.
As a result, it would enable wakeup function too early.
To prevent this issue, we do the following modification:
- Delay about 100 us to enable wakeup function in kernel drivers [1].
- To guarantee 100 us is enough, we need to disable the USB debounce by
default in coreboot.
According to section register 0x404 and 0x420 in
"(CODA) MT8169_PERICFG_REG.xls" which is only for MediaTek internal use:
The current default value of debounce register for MT8186 USB IP0 and
IP1 is incorrect. The reason we add in coreboot is that the default
value should be correct when SoC is booting up.
This modification is only for MT8186. The subsequent SoCs will adjust
the wakeup function to correct register value by default.
[1]: 0d8cfeeef3f5 (usb: xhci-mtk: fix random remote wakeup)
TEST=after stress test, not found premature wakeup by USB
BUG=b:228773975
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I296c4491c5959670a39fa8bd6ef987557bbc459f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63858
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
