summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2014-02-12baytrail: gpio: add configs for PU/PD functional pinsShawn Nematbakhsh
Pull-ups and pull-downs can be active on functional pins. Add configs for these options so they can be specified on board GPIO maps. TEST=Manual on bayleybay. Verify that platform boots to payload load. BUG=chrome-os-partner:22863 Change-Id: Ie4f77d8ce812f086cc8fe5a6bfcac59669f56f92 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172766 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5209 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: add reset supportAaron Durbin
Bay Trail has the following types of resets it supports: - Soft reset (INIT# to cpu) - write 0x1 to I/O 0x92 - Soft reset (INIT# to cpu)- write 0x4 to I/0 0xcf9 - Cold reset (S0->S5->S0) - write 0xe to I/0 0xcf9 - Warm reset (PMC_PLTRST# assertion) - write 0x6 to I/O 0xcf9 - Global reset (S0->S5->S0 with TXE reset) - write 0x6 or 0xe to 0xcf9 but with ETR[20] set. While these are documented this support currently provides support for 2nd soft reset as well as cold and warm reset. BUG=chrome-os-partner:23249 BRANCH=None TEST=Built and booted. Change-Id: I9746e7c8aed0ffc29e7afa137798e38c5da9c888 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172710 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4878 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-11rambi: Add ncore GPIO config tablesShawn Nematbakhsh
gpncore config tables were previously missing -- add them. Also, make the baytrail GPIO/PAD LUTs easier to read. TEST=Manual. Build + boot on bayleybay. BUG=chrome-os-partner:22865 Change-Id: I49a1b23c7ad4fb5f4c86618e8c78ea9a1a42f79d Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172510 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4874 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-11baytrail: move early init to before mainboardAaron Durbin
It's helpful to have a lot of the early init happen before the handoff to mainboard. One example of this need is having the BARs programmed so that the mainboard can read board-specific gpios. BUG=chrome-os-partner:22865 BRANCH=None TEST=Built. Booted and saw console outout in bayleybay mainboard. Signed-off-by; Aaron Durbin <adurbin@chromium.org> Change-Id: I030d7b4f9061ad7501049e8e204ea12255061fbe Reviewed-on: https://chromium-review.googlesource.com/172290 Tested-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4871 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: Add functions to peek at GPIO input valuesShawn Nematbakhsh
- Add functions to peek at GPIO input pad values (need to be used from romstage for board ram_id GPIOs) - Modify UART GPIOs to use existing fn-assignment function TEST=Manual. Add debug print and verify that GPIO functions return input values. Also, verify UART still functions in romstage. BUG=chrome-os-partner:22865 Change-Id: Ib2e57631c127a592cfa20ab6e2184822424e9d77 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172189 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4870 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: set max frequency early in romstageAaron Durbin
Set the BSP to operate at max frequency early in romstage. The call to punit_init() is when the frequency actually ramps as that makes the punit actually start working. BUG=chrome-os-partner:22857 BRANCH=None TEST=Built and booted. Noted operating frequency status is max. Change-Id: Icfd9e5c7682aa21fc740bd687607ca6a66597d5e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172131 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4869 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: adjust cache policy during romstageAaron Durbin
The caching policy for romstage was previously using a 32KiB of cache-as-ram for both the MRC wrapper and the romstage stack/data. It also used a 32KiB code cache region. The BWG's limitations for the code and data region before memory is up was wrong. It consists of a 16-way set associative 1MiB cache. As long as enough addresses are not read there isn't a risk of evicting the data/stack. Now create a 64KiB cache-as-ram region split evenly between romstage and the MRC wrapper. Additionally cache the memory just below 4GiB in CBFS size. This will cover any code and read-only data needed. BUG=chrome-os-partner:22858 BRANCH=None TEST=Built and booted quickly with corresponding changes to MRC warpper. CQ-DEPEND=CL:*146175 Change-Id: I021cecb886a9c0622005edc389136d22905d4520 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172150 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4868 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: add punit access functionsAaron Durbin
Like the bunit and dunit, add the punit accessor functions. BUG=chrome-os-partner:23085 BRANCH=None TEST=Built. Change-Id: Ifd7184dfca8c0491c107bc1c562ea1ded444e372 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171931 Reviewed-on: http://review.coreboot.org/4867 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-11baytrail: make default GPIO configs closer to power-on defaultsShawn Nematbakhsh
- Set config0 defaults for hysteresis disable, pad bypass, etc. - Set config1 power-on defaults. - Set pad_val for input as default. BUG=chrome-os-partner:22863 TEST=Manual. Enable GPIO_DEBUG and verify pad registers are set according to expectation. Also verify bayleybay still boots to payload loading. Change-Id: I0f1c9e4d4f39c5c56d7e14a82eb4825612e19420 Reviewed-on: https://chromium-review.googlesource.com/171903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4866 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-05baytrail: initialize punitAaron Durbin
The punit is responsible for a number of things. Without performing the sequence included it won't change processor frequency when requested and apparently there are some bizarre hangs introduced if this sequence isn't included either. Lastly, this needs to come after microcode has been loaded. As that is done in bootblock the ordering is correct. One other side effect is that this fixes the graphics devices' device id. Before it was showing up as the same device id of the SoC transaction router. BUG=chrome-os-partner:22880 BUG=chrome-os-partner:23085 BUG=chrome-os-partner:22876 BRANCH=None TEST=Built and booted. Change-Id: Ib7be1d4b365e9a45647c778ee5f91de497c55bf1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171862 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4864 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: load microcode in bootblockAaron Durbin
Start loading microcode in the bootblock. This way no caching has been set up and cache-as-ram mode will be running in a validated configruation (with ucode patch). BUG=chrome-os-partner:22858 BRANCH=None TEST=Built and booted. Confirmed microcode is loaded. Change-Id: I6fd1d8e55bcc9d799b11d9faed771ac50dc120a2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171861 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4863 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: disable tco timerAaron Durbin
The TCO timer always starts ticking out of reset. However, depending on microcode loading and punit initialization the TCO timing out has a different impact on the sytem. Without loading microcode or initializing the punit the tco times out and nothing happens. However, when microcode is loaded a timeout will reset the system. Lastly, if the punit is initialized but the microcode isn't loaded the TCO timeout will shut down the system. To fix all the weird symptoms disable the TCO. BUG=chrome-os-partner:22858 BRANCH=None TEST=Built and booted with microcode loading. Reset doesn't occur. Change-Id: I49cd62f510726a96bf734ae728a352c671d1561e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171860 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4862 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: program PUNIT memory-mapped base addressAaron Durbin
Apparently there was another BAR living at 0x5c in the LPC bridge that mapped the PUNIT registers. EDS 2.0 released and this register is now documented. BUG=chrome-os-partner:23085 BRANCH=None TEST=Built and booted. Change-Id: I5892c2a14923b57826060e92b4335cb1952ea057 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171612 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4861 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: add 316 microcodeAaron Durbin
The 316 microcode is the newest version. Include that in the build. BUG=chrome-os-partner:22858 BRANCH=None TEST=Built and partially booted with microcode loading. Noted 316 loaded. Change-Id: Iba01dd58688737ae38bc58a84014ee9526540db1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171611 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4860 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: additional iosf changesAaron Durbin
Allow for one to write an individual byte of a 32-bit register when sending a read/write through the IOSF messaging system. Add PUNIT registers and fields for early sequencing. BUG=chrome-os-partner:23085 BRANCH=None TEST=Built and partially booted with changes that use PUNIT registers and individual byte en fields. Change-Id: I929fb5c51d805c55c478cab884e3572254987fc7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171710 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4859 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: import and use updated mrc_wrapper.hAaron Durbin
The mrc_wrapper.h was changed to protect against ABI differences between the two sets of compilers and flags used. This requires a prope shim for the console output funciton. BUG=chrome-os-partner:23048 BRANCH=None TEST=Built and booted successfully. Change-Id: I976e692e66dcfc0eacadae6173abfd9b81e31137 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171580 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4858 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: Rearrange config options alphanumericallyVadim Bendebury
This is a no-op change for easier maintenance. BUG=none TEST=manual . baitrail coreboot still builds and runs Change-Id: I0c0bd78c6f361e8f81979f19cce148e7f51865ee Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171002 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4857 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: start collecting timestampsAaron Durbin
This commit always selects COLLECT_TIMESTAMPS and starts tracking TSC values from the early stages of bootblock. The initial timestamp value is saved in mm0 and mm1 while in bootlbock. This approach works because romcc is not configured to use mmx registers for its compilation. Additionally, the romstage api with the mainboard was changed to always pass around a pointer to a romstage_params structure as the timestamps are saved in there until ram is up. BUG=chrome-os-partner:22873 BRANCH=None TEST=Built and booted with added code to print out timestamps at end of ramstage. Everything looks legit. Change-Id: Iba8d5fff1654afa6471088c46a357474ba533236 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170950 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4856 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-03baytrail: Add GPIO initial configuration infrastructure.Shawn Nematbakhsh
During ramstage, call mainboard_get_gpios to get initial GPIO configuration from the mainboard code, then initialize GPIOs as requested. BUG=chrome-os-partner:22863 TEST=Manual. Using bayleybay GPIO table, set UART GPIOs to 'function 1', and verify UART still works after GPIO configuration. Also, verify legacy GPIO config is functional by toggling test pin. Change-Id: Ic58d8ddd15c4dc48a751a83f6d26c7809c1efc42 Reviewed-on: https://chromium-review.googlesource.com/170306 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4855 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-02Add section header parsing and use it in the mk-payload stepRonald G. Minnich
This completes the improvements to the ELF file parsing code. We can now parse section headers too, across all 4 combinations of word size and endianness. I had hoped to completely remove the use of htonl until I found it in cbfs_image.c. That's a battle for another day. There's now a handy macro to create magic numbers in host byte order. I'm using it for all the PAYLOAD_SEGMENT_* constants and maybe we can use it for the others too, but this is sensitive code and I'd rather change one thing at a time. To maximize the ease of use for users, elf parsing is accomplished with just one function: int elf_headers(const struct buffer *pinput, Elf64_Ehdr *ehdr, Elf64_Phdr **pphdr, Elf64_Shdr **pshdr) which requires the ehdr and pphdr pointers to be non-NULL, but allows the pshdr to be NULL. If pshdr is NULL, the code will not try to read in section headers. To satisfy our powerful scripts, I had to remove the ^M from an unrelated microcode file. BUG=None TEST=Build a peppy image (known to boot) with old and new versions and verify they are bit-for-bit the same. This was also fully tested across all chromebooks for building and booting and running chromeos. BRANCH=None Change-Id: I54dad887d922428b6175fdb6a9cdfadd8a6bb889 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/181272 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: http://review.coreboot.org/5098 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-31baytrail: introduce pattrsAaron Durbin
The pattrs structure is intended for the supporting coreboot code to reference instead of going back to the source of the values (msrs, cpuid, etc). It essentially serves as a global structure for collecting attributes about the platform/processor. Additionally, the implementation provides a point during boot to hoook work before device enumeration/initialization by providing a init() function to soc_intel_baytrail_ops that is called before device work in the boot state machine. BUG=chrome-os-partner:22862 BUG=chrome-os-partner:22863 BRANCH=None TEST=Built and booted. Noted pattrs output. Change-Id: I073da8aca29635146fb0d4a2625b2b7564fd8414 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170403 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4854 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: add dunit access and registersAaron Durbin
The dunit on baytrail is the dram unit. Provide a means to access the configuration registers there using the proper IOSF mechanisms. BUG=chrome-os-partner:22875 BRANCH=none TEST=Built and booted. Able to read dram registers. Change-Id: I4d5c019720a7883fe93f3e1860bcd57ce2ea6542 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170490 Reviewed-on: http://review.coreboot.org/4853 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: set host memory mapAaron Durbin
Prior to this commit the coreboot resource allocator was not using proper addresses. That's not surprising there wasn't any code to initialize the resources properly. This commit initializes the memory map accoring to the BUNIT registers. BUG=chrome-os-partner:22860 BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted. Noted output for resource assignments is sane. Change-Id: Ice8d067d8b993736de5c5b273a0f642fa034a024 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170429 Reviewed-on: http://review.coreboot.org/4852 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: add common pci_operationsAaron Durbin
The coreboot device modeling for pci devices wants a pci_operations structure for all devices. This structure just sets the subsystem vendor and device id. Add a common one that all the other pci drivers can use for Bay Trail. BUG=chrome-os-partner:22860 BRANCH=None TEST=Built and booted while utilizing this new structure. Change-Id: I39949cbdb83b3acb93fe4034eb4278d45369e321 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170428 Reviewed-on: http://review.coreboot.org/4851 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: initialize graphics before MRCAaron Durbin
The graphics device needs to have its resource contraints initialized before running the reference code. Right now just use a 256MiB aperture, 32MiB of stolen memory data, and 2MiB GTT memory. BUG=chrome-os-partner:22869 BRANCH=None TEST=Built and booted. Noted amount of stolen memory matches configuration as well as BAR size within the graphics device. Change-Id: I328bf858f288363187cf705d6340947393b5ff10 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170427 Reviewed-on: http://review.coreboot.org/4850 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: cache ROM space early in bootblockAaron Durbin
Take advantage of the cache early in bootblock. The intent is to speed up cbfs walking when trying to locate romstage. BUG=chrome-os-partner:22857 BRANCH=None TEST=Built and booted. Change-Id: If03210103c9782390230915db3b4a9759d172dce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170426 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4849 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: update microcode to version 313Aaron Durbin
B2 and B3 steppings are now bumped to version 313. BUG=chrome-os-partner:22858 BRANCH=None TEST=Built. Change-Id: I09ae5110b66c725e959e95fc15bc85ccf371495d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170425 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4848 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: add initial supportAaron Durbin
The initial Bay Trail code is intended to support the mobile and desktop version of Bay Trail. This support can train memory and execute through ramstage. However, the resource allocation is not curently handled correctly. The MRC cache parameters are successfully saved and reused after the initial cold boot. BUG=chrome-os-partner:22292 BRANCH=None TEST=Built and booted on a reference board through ramstage. Change-Id: I238ede326802aad272c6cca39d7ad4f161d813f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/168387 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4847 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 13:13:28 +0000