summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2020-02-17soc/intel/skl: Rename me_hfs union into me_hfstsSridhar Siricilla
Rename below union tags for consistency: me_hfs2 -> me_hfsts2 me_hfs3 -> me_hfsts3 me_hfs6 -> me_hfsts6 TEST=Verified on Soraka Change-Id: Ibb53e6a5f2b95021f86b3e42e100b711b7d6e64e Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-17src/soc/tigerlake: Accomodate JSP specific changes in iomap.hMeera Ravindranath
Updating MCH, GSPI And I2C base addresses for JSP in iomap header. BUG=None BRANCH=None TEST=Compilation for Jasper lake board is working Change-Id: Ia8e88e02989fe80d7bd1f28942e005cb0d862fcb Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38754 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17soc/mediatek: dsi: Correct bits_per_pixel for MIPI_DSI_FMT_RGB666Yu-Ping Wu
The number of bits per pixel for MIPI_DSI_FMT_RGB666 should be 24 instead of 18. BRANCH=none BUG=none TEST=none Change-Id: I9574502b2dec4b5a042df3886922ddd8c755da1a Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jitao Shi <jitao.shi@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-17soc/mediatek: dsi: reduce the hbp and hfp for phy timingJitao Shi
The extra data transfer in DSI, namely, lpx, hs_prepare, hs_zero, hs_exit and the sof/eof of DSI packets, will enlarge the line time, which causes the real frame on dsi bus to be lower than the one calculated by video timing. Therefore, hfp_byte is reduced by d_phy to compensate the increase in time by the extra data transfer. However, if hfp_byte is not large enough, the hsync period will be increased on DSI data, leading to display scrolling in firmware screen. To avoid this situation, this patch changes the DSI Tx driver to reduce both hfp_byte and hbp_byte, with the amount proportional to hfp and hbp, respectively. Refer to kernel's change in CL:1915442. Also rename 'phy_timing' to 'timing' to sync with kernel upstream. Since the phy timing initialization sequence has been corrected, the m value adjustment in the analogix driver can be removed. BUG=b:144824303 BRANCH=kukui TEST=emerge-jacuzzi coreboot TEST=Boots and sees firmware screen on krane and juniper TEST=No scrolling issue on juniper AUO and InnoLux panels Change-Id: I10a4d8a4fb41c309fa1917cf1cdf19dabed98227 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-17soc/mediatek: dsi: Increase pcw precisionYu-Ping Wu
When configuring MIPI DSI Tx, the value of pcw was calculated from data rate in MHz, leading to loss of precision. This patch changes to use data rate in Hz for the calculation so that the resulting value should be consistent with the one in kernel (CL:1786327). In addition, change the type of data rate to u32, and calculation of data rate from pixel clock is changed to use DIV_ROUND_UP for consistency with kernel (CL:1761843). Also remove unused variable txdiv. BRANCH=kukui BUG=b:149051882 TEST=emerge-jacuzzi coreboot TEST=No scrolling issue on Juniper AUO and InnoLux panels Change-Id: I23220d446833b956431006027bbc8cb20fc696a5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38827 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17soc/tigerlake: Add Device id for Tiger Lake Dual CoreSrinidhi N Kaushik
Add device id for Tiger Lake Dual core part. BUG=b:148965583 BRANCH=none TEST="emerge-tglrvp coreboot chromeos-bootimage", flash and boot Change-Id: Ied0cef2fcc8ae6f25949f98f886c4d79f64b54cd Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-02-17soc/intel/{cnl,icl,skl,tgl}/bootblock: Update text for DMI PCR 2774Wim Vervoorn
Make sure the Skylake comment refers to the correct BWG paragraph and update the text for all. BUG=N/A TEST=build Change-Id: Id383f200e079bdb91cea2240bd7a957d723a7b89 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-02-17soc/intel{cnl,icl,skl,tgl}/bootblock: Make sure DMI PCR 2770 is setWim Vervoorn
DMI PCR 2770 (LPC IO DECODE RANGES) should be identical to LPC PCI offset 0x80. This is specified in PCH BWG par 2.5.1.5. Add the support to make sure this PCR is always set correctly. BUG=N/A TEST=tested on facebook monolith. Change-Id: I33ff2b96dea78b5ff1c7c9416cf74f67d79f265d Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38746 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17vboot: remove VBOOT_SAVE_RECOVERY_REASON_ON_REBOOT optionJoel Kitching
With CL:1940398, this option is no longer needed. Recovery requests are not cleared until kernel verification stage is reached. If the FSP triggers any reboots, recovery requests will be preserved. In particular: - Manual requests will be preserved via recovery switch state, whose behaviour is modified in CB:38779. - Other recovery requests will remain in nvdata across reboot. These functions now only work after verstage has run: int vboot_check_recovery_request(void) int vboot_recovery_mode_enabled(void) int vboot_developer_mode_enabled(void) BUG=b:124141368, b:35576380 TEST=make clean && make test-abuild BRANCH=none Change-Id: I52d17a3c6730be5c04c3c0ae020368d11db6ca3c Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38780 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-15soc/tigerlake: Update xhci ACPI files for JSPMeera Ravindranath
ACPI files for xhci in JSL is different from TGL. Hence, renaming xhci.asl to xhci_tgl.asl and adding a new file xhci_jsl.asl for JSL. Also, allowing xhci.asl to choose the correct file based on the SoC selected. BUG=None BRANCH=None TEST=Compilation for JasperLake board is working Change-Id: Ia8e88e02989ff80d7cd1f28941e005cb0d842fcb Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-15soc/intel/tigerlake: Update PMC Register Base and platform check for JSPUsha P
Change: 1. PCR_PSF3_TO_SHDW_PMC_REG_BASE_JSP to 0X0A00 for JSP 2. Platform check in espi.c BUG=None TEST= 1. Test for JSL RVP Boot 2. Verify PMC register values are valid for GEN_PMCON and GBLRST_CAUSE from the coreboot console logs. Change-Id: I6017a9703764b5454e7be479c1e08afe614908f1 Signed-off-by: Usha P <usha.p@intel.com> Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38704 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-15soc/intel/tigerlake: Update Kconfig related to JSLUsha P
Update Kconfig: 1. select INTEL_CAR_NEM for SOC_INTEL_JASPERLAKE 2. Update the right value of MAX_ROOT_PORTS and MAX_PCIE_CLOCKS for SOC_INTEL_JASPERLAKE Change-Id: I4aa52c80bfd6134164a0925ea548579b3cc54a55 Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-12soc/intel/{skl, common}: Move ME Firmware SKU Types to common codeSridhar Siricilla
1. Move ME firmware SKU types into common code. 2. Define ME_HFS3_FW_SKU_CUSTOM SKU. TEST=Verified on hatch & soraka. Change-Id: Iaa4cf8d5b41c1008da1e7aa63b5a6960bb9a727b Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-11vendorcode/intel: Remove Ice Lake FSP BindingsJohanna Schander
By updating the FSP submodule we now got all FSP headers from within that repo. This commit changes the default paths to use these and fixes some include paths to allow the usage of vendorcode/intel/edk2/UDK2017 together with the official Intel distribution. We are also adding back the CHANNEL_PRESENT enum, that is missing in the official headers. This was tested on the Razer Blade Stealth (late 2019). Change-Id: I7d5520dcd30f4a68af325125052e16e867e91ec9 Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37579 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christoph Pomaska <github@slrie.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-11soc/intel/common/block/lpc: Add lpc_get_fixed_io_decodeWim Vervoorn
Add function to return the fixed io decode ranges contained in register 0x80 of the LPC interface. BUG=N/A TEST=build Change-Id: Ie46d7c9d7a399a8489c030d906f75ba61db19cc4 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38745 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09intel/stm: Add platform opt-in KconfigNico Huber
Selecting STM on an arbitrary platform would likely result in a brick, so let's hide the prompt by default. Change-Id: I50f2106ac05c3efb7f92fccb1e6edfbf961b68b8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: <cedarhouse1@comcast.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-09soc/intel/tigerlake: add memory configuration supportNick Vaccaro
Move some of the common memory code that was being performed in mainboard into the soc to reduce redundant code going forward. BUG=b:145642089 BRANCH=none TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer, log into kernel and verify memory size shows 8GB. Change-Id: I8de502d4f05d52b9dae34e3b013c6d5b1886fa55 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09soc/intel/{cnl,icl,skl,tgl,common}: Make changes to ↵Sridhar Siricilla
send_heci_reset_req_message() Below changes have been implemented in send_heci_reset_req_message(): 1. Modify return values to align with other functions in the same file. 2. Add additional logging. 3. Replace macro definitions of reset types with ENUM. 4. Make changes to caller functions to sync with new return values. 5. Rename send_heci_reset_req_message() to cse_request_global_reset(). Test=Verified on hatch board. Change-Id: I979b169a5bb3a5d4028ef030bcef2b8eeffe86e3 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37584 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09soc/intel/common: Add description to HMRFPO statusSridhar Siricilla
Below changes are implemented: 1. Fix typos. 2. Rename 'padding' field of hmrfpo_get_status_resp struct to 'reserved' to match with ME BWG Guide. 3. Add documentation for HMRFPO Status. TEST=Build and boot hatch Change-Id: I4db9bdf7386c48e17ed0373cf334ccff358d1951 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09soc/intel/common: Rename functions for consistent namingSridhar Siricilla
Below changes are done: 1. Rename below functions to have consistent naming: set_host_ready() -> cse_set_host_ready() wait_cse_sec_override_mode() -> cse_wait_sec_override_mode() send_hmrfpo_enable_msg() -> cse_hmrfpo_enable() send_hmrfpo_get_status_msg() -> cse_hmrfpo_get_status() 2. Additional debug messages are added in cse_wait_sec_override_mode(). TEST=Build and Boot hatch board. Change-Id: Icfcf1631cc37faacdea9ad84be55f5710104bad5 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-09soc/intel/{common,skl,cnl,icl,apl,tgl}: Move HFSTS1 register definition to SoCSridhar Siricilla
Below changes are implemented: 1. Move HFSTS1 register definition to SoC since HFSTS1 register definition is specific to a SoC. Moving structure back to SoC specific to avoid unnecessay SoC specific macros in the common code. 2. Define a set of APIs in common code since CSE operation modes and working states are same across SoCs. cse_is_hfs1_com_normal(void) cse_is_hfs1_com_secover_mei_msg(void) cse_is_hfs1_com_soft_temp_disable(void) cse_is_hfs1_cws_normal(void) 3. Modify existing code to use callbacks to get data of me_hfs1 structure. TEST=Build and Boot hatch, soraka, tglrvp, bobba and iclrvp boards. Change-Id: If7ea6043d7b5473d0c16e83d7b2d4b620c125652 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-07sc7180: clock: Fix QUP DFSR configuration for perf levelsTaniya Das
Update the QUP DFSR cmd to clear the SW control and also update the perf registers when M is set. While at it also update the d_2 values. Tested: validated DFSR clock configuration and M/N/D values. Change-Id: I6bba1c6f99810963aaa607885ef400c523c0e905 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-02-04soc/intel: Add get_pmbaseEugene Myers
Originally a part of security/intel/stm. Add get_pmbase to the intel platform setup code. get_pmbase is used by the coreboot STM setup functions to ensure that the pmbase is accessable by the SMI handler during runtime. The pmbase has to be accounted for in the BIOS resource list so that the SMI handler is allowed this access. Change-Id: If6f6295c5eba9eb20e57ab56e7f965c8879e93d2 Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37990 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-04soc/intel/cannonlake: Allow Audio DSP OSC qualification for low power idleAamir Bohra
With Audio DSP OSC qualification disabled from S0ix criteria. S0ix is achieved before the DSP is suspended. When driver tries to suspend DSP its already turned off. BUG=b:139481313 Change-Id: I20b793b95483af03ce4ae068ac07864a9e90d39b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37604 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-04soc/intel: Remove duplicate CPUID entrySubrata Banik
This patch removes duplicate CPUID entry between KBL and CFL. CFL-D0 has KBL CPU + CNP PCH hence no need to redefine same KBL CPUID (0x806EA) for CFL-D0. TEST=CFL-D0 report platform serial msg shows "Cofeelake D0" with CPUID 0x806EA. Change-Id: I078dd7860891896b512967dc8dec5dd94d069193 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-02-04soc/amd: unify SMBus supportAaron Durbin
The SMBus support is identical between stoneyridge and picasso. Unify on common support code. Change-Id: Ic3412c5ee67977a45c50b68f36acc45c3d560db5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-02-01soc/intel/tigerlake: Configure TCSS xHCI and xDCIWonkyu Kim
Configure xHCI, xDCI according to board design BUG=none BRANCH=none TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9c790cce8d6e8dfff84ae5ee4ed6b3379f45cb9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-31soc/amd/picasso: move to using smbus_host.h definitionsAaron Durbin
The SMBus function declarations were duplicated. Use the common ones provided by smbus_host.h. Change-Id: Ia8fec8f58d72690d73f2241e69b3ff05f74943a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38615 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-31soc/amd/picasso: use SMBus timeout in compilation unitAaron Durbin
The timeout is fixed and only used in one place. Put the assumption in the compliation unit utilizing the defintion. Change-Id: I93c061e74df6b4265fd1c61fc4669410ebc9554f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-31soc/amd/picasso: use SMBus speed in compilation unitAaron Durbin
The fixed bus speed of 400 kHz doesn't need to reside in a header file. Just move the assumption into the code itself. Change-Id: I8bb68607070d0daeae2ad3bcd79f49d5c20048fd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-31soc/amd/stoneyridge: move to using smbus_host.h definitionsAaron Durbin
The SMBus function declarations were duplicated. Use the common ones provided by smbus_host.h. Change-Id: Ic912b91daf79ecd2c276a383edcda563891cf643 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38222 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-31soc/amd/stoneyridge: use SMBus timeout in compilation unitAaron Durbin
The timeout is fixed and only used in one place. Put the assumption in the compliation unit utilizing the defintion. Change-Id: I7537549da90d0bc158e638c533e8e8b0f1e28a7d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38612 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-31soc/amd/stoneyridge: use SMBus speed in compilation unitAaron Durbin
The fixed bus speed of 400 kHz doesn't need to reside in a header file. Just move the assumption into the code itself. Change-Id: I426fe078909a9b725c1747380d69af31292b6d1e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38611 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-30soc/intel/common/systemagent: Add Kconfig guardAndrey Petrov
Looks like selecting SOC_INTEL_COMMON force-sets MMCONF_BASE_ADDR to some value which can't be overriden outside of soc/intel/common. So adding a non-SoC platform thats uses code from soc/intel/common is not possible. TEST=build test on wip platform Change-Id: Ia160444e8ac7cac55153f659f4d98f4f77f0d467 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Guckian
2020-01-30soc/intel/common/block/lpc: Add CMP-H LPC IDsGaggery Tsai
This patch adds CMP-H LPC IDs. TEST=Build an image and boot with discrete TPM chip. Enable measured boot and kernel could get the measured data from TPM chip. Change-Id: I7eac8b0514f79b47a05973210e2472dd1dc3d0ed Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38251 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-29soc/intel/skylake/acpi/dptf: Remove processor throttling controlsWim Vervoorn
The fwts method test reports errors on the methods implementing processor throttling control. The T states are not supported in coreboot at this moment. Remove the methods required by processor throttling control. They can be restored when the required support has been added to the SoC implementation. BUG=https://ticket.coreboot.org/issues/252 TEST=tested using fwts on facebook monolith. Found-by: fwts 19.12.00 Change-Id: Ib50607f60cdb2ad03e613d18b40f56a4c4a4c714 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-29amdblocks/biosram: Do small reformattingMarshall Dawson
Remove two blank lines and reorder functions by read/write sizes. Change-Id: I7bd6ed44546d49b65135a98e424a5669d90f2867 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38146 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-29soc/intel/tigerlake: Disable image clocksWonkyu Kim
TGL FSP does just pin mux for image clock pins by UPD and image clocks are controlled by ACPI(camera_clock_ctl.asl) under tigerlake SOC folder. Disable image clocks by UPD for bypassing FSP pin mux and do pin mux in gpio.c according to board design. BUG=none BRANCH=none TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I5aba5b2fb6deee231e3ec34c8dbc9972b01041f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38562 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28soc/intel/tigerlake: Enable DP ports according to board designWonkyu Kim
BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux from pinctl driver. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ia6e9271a11a1f9e6f98923772219ccc1e7daecda Reviewed-on: https://review.coreboot.org/c/coreboot/+/38528 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28drivers/spi/spi_flash: remove spi flash namesAaron Durbin
The names of each spi flash cause quite a bit of bloat in the text size of each stage/program. Remove the name entirely from spi flash in order to reduce overhead. In order to pack space as closely as possible the previous 32-bit id and mask were split into 2 16-bit ids and masks. On Chrome OS build of Aleena there's a savings of >2.21KiB in each of verstage, romstage, and ramstage. Change-Id: Ie98f7e1c7d116c5d7b4bf78605f62fee89dee0a5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-01-28commonlib: Add commonlib/bsdJulius Werner
This patch creates a new commonlib/bsd subdirectory with a similar purpose to the existing commonlib, with the difference that all files under this subdirectory shall be licensed under the BSD-3-Clause license (or compatible permissive license). The goal is to allow more code to be shared with libpayload in the future. Initially, I'm going to move a few files there that have already been BSD-licensed in the existing commonlib. I am also exracting most contents of the often-needed <commonlib/helpers.h> as long as they have either been written by me (and are hereby relicensed) or have an existing equivalent in BSD-licensed libpayload code. I am also relicensing <commonlib/compression.h> (written by me) and <commonlib/compiler.h> (same stuff exists in libpayload). Finally, I am extracting the cb_err error code definitions from <types.h> into a new BSD-licensed header so that future commonlib/bsd code can build upon a common set of error values. I am making the assumption here that the enum constants and the half-sentence fragments of documentation next to them by themselves do not meet the threshold of copyrightability. Change-Id: I316cea70930f131e8e93d4218542ddb5ae4b63a2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-01-26soc/intel/skylake: Update 64 bit SA DRAM bit fields as per datasheetSubrata Banik
This patch updates SA DRAM registers bit definitions as per SKL datasheet vol 2, doc 332688. TEST=Build and boot EVE and Soraka to OS. Change-Id: Ia32723444c044572fbcecce151d89e739e570b3b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-26soc/intel/skylake: Add _SEG/_UID name variablesSubrata Banik
TEST=Build and boot EVE and Soraka to OS. Change-Id: Ic765dc2a7a522872ee991e47e3608f60a0e6411a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38513 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-26soc/intel/skylake: Only reserve TPM area for !CONFIG_TPM_CR50 deviceSubrata Banik
As per PC client TPM specification, the TPM description contains the base address of the TIS interface 0xfed40000 and the size of the MMIO area is 20KB (0x5000). Hence ACPI used to reserve those fixed system memory from getting used by OS. Platform with TPM_CR50 doesn't require fixed SoC mapped memory hence additional reservation might not required. TEST=Build and boot EVE and Soraka to OS. Change-Id: Id02a2659ce42f705180370000df89d4f6b64afce Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38512 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25soc/intel/tigerlake: Add IPU in ACPIWonkyu Kim
Add IPU ACPI object for Camera ACPI. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I8c1ca9c053f0c8ef8d7c027c317c7af74d5f0f8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/38469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-25soc/intel/tigerlake: Configure ClkReq according to mainboard designWonkyu Kim
BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board from NVMe Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I14997e0a7d03bf1a97d115cbf0a7ad2603ef9953 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38285 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25soc/intel/tigerlake: Add GPIO helper functionShaunak Saha
This patch adds ASL methods like GRXS, GTXS, STXS and CTXS which are used to get, set and clear gpio values. We use ASL 2.0 syntax here for gpio.asl. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board Change-Id: I17e75ff2a7cb67e94669059a1ed9d73a720ebcb1 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38442 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25soc/intel/tigerlake: Fix GPIO communitiesShaunak Saha
GPIOs are divided into different communities. Each community consists of one or more GPIO groups. We need to configure the groups in coreboot so that they are mapped properly. GPIO comuinities in coreboot should match with the kernel gpio communities also. Kernel reads the ASL file from coreboot. This patch adds the proper community mapping in ASL code to match with kernel code. In gpio_soc_defs.c file we are indexing the groups correctly. In gpio.h file we define all the gpio devices as kernel populates sysfs with separate gpio device for each community. This patch is created based on Intel Tiger Lake Processor PCH Datasheet with Document number:575857 and Chapter number:27. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board. In /sys/kernel/debug/pinctrl verify INTC34C5:0<1-3> listing all the pins for each community. e.g., #cat /sys/kernel/debug/pinctrl/INT34C5:00/pins should list all the community 0 pins. Change-Id: I40c386db060d84c1b7fba9c587f960d6a92f84ba Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-01-24soc/intel/skylake: Remove unused ICH memory referenceSubrata Banik
TEST=Build and boot EVE and Soraka to OS. Change-Id: Ic7840ce264393b4a955f17b16f5e0f556e34a776 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38511 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-24soc/intel/skylake: Move pci_irqs.asl from SA to PCHSubrata Banik
SoC handles PCI IRQs programming inside PCH related ASL. TEST=Build and boot EVE and Soraka to OS. Change-Id: If95101193fa1b528dc64f57c0fc12f13f16d82b4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-24soc/intel/tigerlake: Enable SATAWonkyu Kim
Configure SATA FSP UPD according to mainboard design. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board with SATA memory Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9350d71d76cd3d449fd959b5398d5ac653bc459e Reviewed-on: https://review.coreboot.org/c/coreboot/+/38504 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-23soc/intel/common: Update SA bit fields as per EDSSubrata Banik
This patch updates system agent related registers bit definitions as per EDS. For example: As per CNL/ICL EDS MCHBAR register base is between bit 16-38 but coreboot programming was not aligned with EDS previously. CNL EDS doc number: 566216 Also provide provision to program 64bit values as per SA EDS definitions TEST=Dump MCHBAR in coreboot and ASL shows same 32 bit value. Change-Id: I37340408fe89c94ce81953c751c8d7e22bc81a42 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-22soc/intel/tigerlake: enable gpio dual route supportNick Vaccaro
Enable SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT for tigerlake. BUG=b:142961277, b:145494156 BRANCH=none TEST=none Change-Id: I1f785f410982f7d7598942f9b12196851e77c240 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37629 Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22soc/intel/tigerlake: Update fsp_params for TGLSrinidhi N Kaushik
Add initial fsp upd settings for TGL, both romstage and ramstage upd's to support basic build and boot of TGL RVP. - Add Silicon upd settings which includes * Serial IO/UART settings * Graphics settings * USB2/USB3 settings - Add Romstage upd settings which includes * Pcie Root port settings * IGD initialization * Hyper Threading settings * SMBus controller settings * Debug probe settings BUG=none BRANCH=none TEST=Build and boot Tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I16df66451fd3a681df1222d283d97dd6bdaff0e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37960 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22soc/intel/tigerlake: Update GPIO configRavi Sarawadi
GPIOs are divided into different communities. Each community consists of one or more GPIO groups. We need to configure the groups from coreboot so that they are mapped properly. GPIO communities should be properly configured in GPIO_CFG and MISCCFG registers. GPP_* defines in gpio_soc_defs.h are configured in GPIO_CFG register while the PMC_GPP_* in pmc.h are used to configure the MISCCFG registers. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board. Verified that after setting the gpe from devicetree the GPP_EN register for that community gets updated setting that specific bit. From the iotools i checked that GPE_EN register for that community is updated with that specific bit set to 1. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I585100375feee39b5a9105bdf6d9f5ca3a5bb2fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/37427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-01-22soc/intel/common: Add Elkhartlake Device IDsTan, Lean Sheng
Add Elkhartlake CPU, SA and PCH IDs. EHL PCH is code named as MCC. Also add a MCH ID (JSL_EHL) which is shared by both JSL and EHL SKUs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I03f15832143bcc3095a3936c65fbc30a95e7f0f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38489 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22soc/intel/tigerlake: Update interrupt infoWonkyu Kim
Update interrupt header and interrupt mapping per Intel Silcon reference code. Need to match pci_irqs.asl with FSP setting which followed by PCH BIOS spec. Reference PCH BIOS spec#613495 https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/ClientOneSiliconPkg /IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/PeiItssPolicyLibVer2.c BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Iffc4efad4d0aa55fc0de88d7fe32c0356dbc3c60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38258 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22{soc,southbridge}/*/*/acpi: Add possibility to disable S4Wim Vervoorn
Some boards don't support S3 or S4. The S4 state can't be removed from the available sleep states. Add a config item that allows removal of the S4 state from the list of available sleep states. The S4 state can be removed by selecting the item on board level. For the AMD chipsets the SSFG mask is updated to remove the S4 state. BUG=N/A TEST=build Change-Id: Id802c4cc40308ddf39e99e7f226d55e0e020f0c9 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38431 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-20soc/amd/picasso: Add SMMSTORE supportMarshall Dawson
Add SMMSTORE support for saving EFI NVRAM variables in conjuction with Tianocore payload. Test: none, as this duplicates tested functionality in amd/stoneyridge. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Id05b33edf949611c3f9eac94e7b63a4266c6c4d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-01-20soc/amd/stoneyridge: Add SMMSTORE supportMatt DeVillier
Add SMMSTORE support for saving EFI NVRAM variables in conjunction with Tianocore payload. Test: build/boot several google/kahlee variants, test manipulation and persistence of Tianocore bootorder variables. Change-Id: Ida604a44d1fa5288e96dbe05de1f847e597cc95d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-18soc/intel/cannonlake/bootblock: Add CML-S 2/4-Core MCH IDsGaggery Tsai
This patch adds CML-S 2 and 4-Core MCH IDs and fix wrong ID for 10-Core ID. Change-Id: I30f6c8a5234b7754d984b598bf7bae103ec9712e Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-18soc/intel/cannonlake: Add chip config for SATA strengthJamie Chen
Add config to chip.h for tuning SATA gen3 strength. BUG=b:147351936 BRANCH=none TEST=build successful in puff Change-Id: I4dcd23834fa3c01c1d88697a7bb8cf361709b62e Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38432 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/tigerlake: Update ACPI filesRavi Sarawadi
Add and update ACPI files for Tiger Lake SoC Use ASL2.0 code syntax for new acpi(camera_clock_ctl.asl) Reference PCH EDS#576591 vol1 rev1.2 PCH EDS#575857 vol2 rev1.0 BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Ib82156830273c2937f5f02713ed7dd27da41c857 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37781 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/tigerlake: Update pci dev definitionWonkyu Kim
This change updates pci dev definition according to TGL EDS. Add GSPI3 case in chip.c according to updated pci dev definitions. Reference TGL Process EDS#575681 rev1.0 TGL PCH EDS#576591 rev1.2 BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I4717ac3cc877b13978b18ada504740512f10c709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38341 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/common: Fix typosSridhar Siricilla
Fix typos and replace spaces with tab in macro definitions. TEST=Build and Boot hatch board Change-Id: I43b2df7defc97aaeb7c8c9dfbe08ce78ba81f39b Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38384 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/common/cse: Add description for macrosSridhar Siricilla
Below changes are done in the patch: 1. Remove unnecessary lining, and replace spaces with tabs 2. Add description for macros 3. Correct comment mentioned for wrapper #ifndef TEST=Build and Boot hatch board Change-Id: I630446234321e7998ab42f8506a58b16e9ce4eb0 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-18soc/intel/tigerlake: Update chip filesRavi Sarawadi
Update chip files to include : - Update chip.c based on TGL FSP - Update chip.h based on TGL FSP - Update Kconfig : Define CONFIG_MAX_PCIE_CLOCKS for chip.h update - Update pmc_utils.c and JSL devicetree for build failure Reference PCH EDS#576591 vol1 rev1.2 BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Ie1518a7ffa69079fe82232afe229d9e1ffe29067 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37783 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/common/cse: Add consistent HECI command id/group id namingSridhar Siricilla
Below changes are done: 1. Consistent HECI command/group ID naming. 2. Rename macros to match with Intel ME BIOS Spec. 3. Move command ids, group ids and related macros into cse.h 4. Add description for structure members. TEST=Build and Boot hatch board. Change-Id: Ia902095483d5badf778d0c1faa6bf8cc431f0e50 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-18soc/intel/{skylake,common}/acpi/dptf/thermal.asl: Prevent iasl remarksWim Vervoorn
Prevent iasl remarks about unused parameters. BUG=N/A TEST=build Change-Id: I54fa4712e618038fdd5a96c2012c2ec64ca34706 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-18intel/apollolake: Remove CBFS locator overrideJulius Werner
This patch removes the CBFS locator override for the Apollolake SoC and instead integrates the extra sanity check it was used for straight in the boot device initializer. Change-Id: Iccdb885be233bb027a6a1f2cc79054582cbdf3fc Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-16soc/intel/{cnl,icl,skl, tgl}: Move SOC_INTEL_COMMON_BLOCK_THERMAL into SoC ↵Subrata Banik
specific Kconfig This patch moves common pch code SOC_INTEL_COMMON_BLOCK_THERMAL Kconfig selection into SoC specific Kconfig selection as PCH thermal device is not available with latest PCH (i.e. TGP and JSP). Also added TODO for TGL thermal configuration as applicable. TEST=Able to build and boot TGL RVP with this CL Change-Id: Ibce17cc9f38fb666011ccd8f97bee63033ff5302 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38444 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-15soc/intel/common/block/fast_spi: don't include all spi flash driversAaron Durbin
The fast spi driver implements hardware sequencing which abstracts away the underlying spi flash commands in the hardware block. It also has its own spi flash probe function to intercept the spi flash ops. As such it's not necessary to include all spi flash drivers. On a hatch Chrome OS build this saves 9.5KiB of text in each of verstage, romstage, and ramstage. Change-Id: Ifb1b962cde3a6a02353ddf83279234057a9ec2fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-15drives/spi/spi_flash: add option to not select all driversAaron Durbin
Add a new Kconfig option, SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS, to make it easier for other parts of the code base to indicate that all spi flash drivers should not be included. Change-Id: Ibf2c4f1d2b8a73cff14bb627ddf759d7970920ea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-15soc/intel/tigerlake: Update header filesRavi Sarawadi
Modify header files to update/include tigerlake: - IOMAP BARs according to silicon reference code - Update Serial IO devices according to PCH EDS - Add board types BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I185f2c22c54a6ae386527069606abb52cce1ec80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-01-14sb/intel/common: Declare common smbus_base() and enable_smbus()Kyösti Mälkki
This avoids including platform-specific headers with different filenames from common code. Change-Id: Idf9893e55949d63f3ceca2249e618d0f81320321 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-14soc/intel/baytrail: Add SOUTHBRIDGE_INTEL_COMMON_SMBUSKyösti Mälkki
Change-Id: Ie026b8c57046d951752158fd28277e338ed1421c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38236 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-14soc/intel/cannonlake: Fix ASL compilation remarksSubrata Banik
This patch fixes below ASL compilation remarks 1. dsdt.asl 495: Method (_DSM, 4) Remark 2119 - ^ Control Method marked Serialized (Due to use of Switch operator) 2. dsdt.asl 721: Name(GPMB, Package(5) {0}) Remark 2063 - ^ Initializer list shorter than declared package length Change-Id: Iabd6c39025713dda7aa69cb479f003fbec8855b3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-13soc/intel/tigerlake: Select correct fsp_param as per SoC KconfigMaulik V Vaghela
New Kconfig for Jasperlake soc was created and fsp_param for Jasperlake has differences compared to Tigerlake. Thus renaming fsp_params.c to fsp_params_tgl.c to point out correct file as per soc selected. Also adding new file for fsp_param_jsl for Jasperlake SoC and currently its the copy of fsp_param_tgl. TODO: update files with correct fsp_params Change-Id: I12815ae28a1eb4c64afda0a85b5c14fc0da3e4b1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37267 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-12soc/intel: Fix ACPI device operations initializationKarthikeyan Ramasubramanian
Initialize ACPI device operations only when CONFIG_HAVE_ACPI_TABLES is enabled. BUG=None TEST=Build Test Change-Id: I5c5266885d8b08338d17a87bb95110765882120e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-10{Documentation,soc/intel}: Fix typoElyes HAOUAS
Change-Id: I708ab503ece37f44cc38511aad2383ab2cec3368 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37468 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-10soc/mediatek/mt8183: Restore vcore after DRAM calibrationHuayang Duan
DRAM calibration sets vcore to different voltages at different frequencies. After DRAM calibration, vcore should be restored to the default voltage, which is 800mV for both eMCP and discrete DDR devices. BRANCH=kukui BUG=b:146618163 TEST=bootup pass Change-Id: Ia87b4ac78a32dbd4c4ab52e84d307cb46525afa1 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-01-10soc/intel/{apl,cnl,icl,skl,tgl}: Make above 4GB MMIO resource properSubrata Banik
This patch ensures coreboot is not publishing above 4GB mmio resource if soc common config "enable_above_4GB_mmio" not enable. Publishing unnecessary 4GB above MMIO resource with wrong base and size is causing problem while working with discrete GPU. Unable to boot with dGPU on IA platform with below error: [ 2.297425] pcieport 0000:00:1c.0: PCI bridge to [bus 05] [ 2.302858] pcieport 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 2.309427] pcieport 0000:00:1c.0: bridge window [mem 0xb2000000-0xb20fffff] [ 2.316679] pcieport 0000:00:1c.0: bridge window [mem 0x840000000-0x8c01fffff 64bit pref] [ 2.325072] pcieport 0000:00:1c.0: PCI bridge to [bus 05] [ 2.330502] pcieport 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 2.337062] pcieport 0000:00:1c.0: bridge window [mem 0xb2000000-0xb20fffff] [ 2.344317] pcieport 0000:00:1c.0: bridge window [mem 0xa0000000-0xb01fffff 64bit pref] [ 2.352541] [drm] Not enough PCI address space for a large BAR. Change-Id: I77b3a0e44582b047d7fbe679d3000d616f7e6111 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2020-01-09sb/intel/common: Add smbus_set_slave_addr()Kyösti Mälkki
Change-Id: I7dddb61fab00e0f4f67d4eebee0cfe8dcd99f4ab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38230 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-09device,sb/intel: Move SMBus host controller prototypesKyösti Mälkki
Also change some of the types to match the register widths of the controller. It is expected that these prototypes will be used with SMBus host controllers inside AMD chipsets as well, thus the change of location. Change-Id: I88fe834f3eee7b7bfeff02f91a1c25bb5aee9b65 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38226 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-09soc/intel/common: Drop old forked version of SMBUS supportKyösti Mälkki
Switch to use the more recent version in sb/intel/common. Change-Id: Idbff410991db9592a58b9cc0ae7ee8c45d750b13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-09soc/intel/broadwell: Drop old forked version of SMBUS supportKyösti Mälkki
Switch to use the more recent version in sb/intel/common. Change-Id: Icbd54b5671ea2a94aea5db4642698ef679540625 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-09soc/intel/common: Remove extra call layerKyösti Mälkki
Change-Id: I6987eb58b593e1f2bc6adf91be61bf7b5382440d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38122 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-09lib/spd_bin,soc/intel/common: Move get_spd_smbus()Kyösti Mälkki
Only smbuslib.c and spd_bin.c share the same prototypes for SMBUS functions. Therefore, get_spd_smbus() currently only works with soc/intel/.../smbuslib.c and can be implemented there locally. This allows removal of <device/early_smbus.h>. Change-Id: Ic2d9d83ede6388a01d40c6e4768f6bb6bf899c00 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-09soc/intel/common: Sync early SMBUS prototypesKyösti Mälkki
Change-Id: I6b4b5ffd552b9eb4467689c8df85905a1c199bb0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38120 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-09drivers/pc80/rtc: Separate {get|set}_option() prototypesKyösti Mälkki
Long-term plan is to support loading runtime configuration from SPI flash as an alternative, so move these prototypes outside pc80/. Change-Id: Iad7b03dc985550da903d56b3deb5bd736013f8f1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38192 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-09soc/intel/tigerlake: Update KconfigRavi Sarawadi
Update Kconfig: - use CAR NEM mode for tigerlake only as NEM Enhanced is under debug - update GSPI, RP max device #s according to PCH EDS#576591 vol1 rev1.2 - update UART M/N setting according to new PCH baseclock BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I04020d55f1063d521b15f8d0dabbd6f1dabf577c Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-01-09soc/intel/{cnl,icl,tgl}: Move northbridge.asl into common/block/acpiSubrata Banik
This patch creates a common instance of northbridge.asl inside intel common code (soc/intel/common/block/acpi/acpi) and changes cnl,icl & tgl soc code to refer northbridge.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify Device(MCHC) presence after booting to OS. Change-Id: Ib9af844bcbbcce3f4b0ac7aada43d43e4171e08b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38155 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-08soc/intel/tigerlake: Fix PMC configRavi Sarawadi
Fix PMC base address for tigerlake. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Id13222eb5498a5704c11d6b4d1e83212bd8b2723 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-01-08soc/intel/cannonlake: Add VR config for CMLJamie Chen
Add VR config IccMax, DC and AC loadline defaults for CML. Add cpu_pl2_4_cfg to switch two kinds of VR design. BUG:b:145094963 BRANCH:none TEST:build coreboot and fsp with enabled fw_debug. Flashed to device and checked the log. All VR configs were set correctly. Change-Id: I3922bfad5c21dafc64fb05c7d9343b9835b58752 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
2020-01-08soc/intel/cannonlake: Add Comet Lake H SA 4+2 Device IDJamie Chen
This patch adds CML-H 4+2 SA DID into systemagent.c and report platform. According to doc #605546: CML-H (4+2) R1: 9B64h BUG:none BRANCH:none TEST:build no error Change-Id: I5bac6173a84a11abd2ce17f82854fbb14fb8558b Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
2020-01-07soc/intel/{apl,cnl,icl,skl,tgl}: Clean up SA ASL codeSubrata Banik
List of changes in this patch 1. Remove unused variables 2. Make use of absolute path 3. Define macros and use inside SA ASL 4. Rearrange code in nothbridge.asl to move MCRS object under _CRS Change-Id: Id74269ec5a96b087562ccdf2141233db5585ae59 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2020-01-06soc/intel/cannonlake: Add VR config for CFL, CNL and WHLPatrick Rudolph
Add VR config IccMax, DC and AC loadline defaults and voltage regulator maximum for all CFL, CNL and WHL. This supports mainboards with replaceable CPUs and provides sane defaults for boards that are missing the devicetree overwrite. Remove the default IccMax to make use of the introduced lookup-table. Also change some hex values to decimal. I couldn't find CML datasheet, so those are left out for now. Used Doc #337344 and #338023 Section 7. Change-Id: I1d2e174157d468830cc0baf2a2d8295ef61a1a63 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37466 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-06soc/intel/dnv: Remove commented out Kconfig optionSubrata Banik
Change-Id: Ibe646bad09dcfe348dcbfec439129b2d22ec4744 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-03soc/amd/common/block/spi: remove code duplicationAaron Durbin
This removes all the duplicated code and logic and leverages the existing ones in libraries themselves. The current side effect is that protection cannot be fully enabled because the read, write, and write enable command are not exposed in struct spi_flash currently. That support can be revised if protection scheme makes sense for our use-cases once it's better understood. BUG=b:146928174 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I8faf9cc719ee33dd9f03fb74b579b02bbc6a5e2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/37957 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-03device/early_smbus: Drop unused function parameterKyösti Mälkki
Change-Id: I2d62c470c5389af3b10e47ca5e721b78ff16bc79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 17:11:45 +0000