summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2018-10-24vboot: fix CONFIG_RESUME_PATH_SAME_AS_BOOT S3 resume logicJoel Kitching
- should not check VBOOT_STARTS_IN_BOOTBLOCK to set context flag - implement vboot_platform_is_resuming on platforms missing it - add ACPI_INTEL_HARDWARE_SLEEP_VALUES to two intel southbridges [ originally https://review.coreboot.org/c/coreboot/+/28750 ] BUG=b:114018226 TEST=compile coreboot Change-Id: I1ef0bcdfd01746198f8140f49698b58065d820b9 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/29060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-23soc/amd/stoneyridge: Remove smbus.aslRichard Spiegel
The file smbus.asl has 0 bytes (no content). Now that it's no longer included, remove it. BUG=b:117814641 TEST=Build grunt and gardenia. Change-Id: I66389c721e272053d86357f71a6d1242ca767edd Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-23soc/intel/common/block/gpio: Allow GPI to be dual-routedFurquan Shaikh
This change adds new macros to GPIO common library helpers to allow a GPI pad to be dual routed using PAD_CFG_GPI_DUAL_ROUTE. It also adds a helper macro to configure a pad for IRQ and wake. Above macros are guarded using a newly added Kconfig option SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT that is selected only by SoCs that have been validated to allow dual route of GPIs. Currently, this config is selected only for APL/GLK/SKL/KBL that have been validated to work with dual-routing of GPIs for IRQ and wake. BUG=b:117553222 Change-Id: Iaa623d2d78a50f1504e3abe9a47a5a663693aead Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29188 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-23soc/intel/common/block/gpio: Configure Tx Disable in IO standby for GPIsFurquan Shaikh
This change updates various PAD_CFG_GPI* macros to configure Tx as Disabled in IO Standby state. This is done to ensure that the Tx setting is same in IO Standby state as it was in active state i.e. Tx disabled. BUG=b:17553222 Change-Id: If462aee3884cc61a519fb358b84867c695ace251 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-23soc/intel/apollolake: Add reset code to postcar stagePatrick Georgi
Also add a test case for that, a config taken from chromiumos with some references to binaries dropped that aren't in our blobs repo (eg audio firmware). Change-Id: I411c0bacefd9345326f26db4909921dddba28237 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29223 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22intel: Use CF9 reset (part 2)Patrick Rudolph
Make use of the common CF9 reset in SOC_INTEL_COMMON_RESET. Also implement board_reset() as a "full reset" (aka. cold reset) as that is what was used here for hard_reset(). Drop soc_reset_prepare() thereby, as it was only used for APL. Also, move the global-reset logic. We leave some comments to remind us that a system_reset() should be enough, where a full_reset() is called now (to retain current behaviour) and looks suspicious. Note, as no global_reset() is implemented for Denverton-NS, we halt there now instead of issuing a non-global reset. This seems safer; a non-global reset might result in a reset loop. Change-Id: I5e7025c3c9ea6ded18e72037412b60a1df31bd53 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-22intel: Use CF9 reset (part 1)Patrick Rudolph
Add SOUTHBRIDGE_INTEL_COMMON_RESET for all Intel platforms that used to perform a "system reset" in their hard_reset() implementation. Replace all duplicate CF9 reset implementations for these platforms. Change-Id: I8e359b0c4d5a1060edd0940d24c2f78dfed8a590 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-22soc/amd: Implement common reset APINico Huber
Add an `amdblocks` internal API and rename soft_reset() => warm_reset() hard_reset() => cold_reset() as these terms are commonly used in the surrounding code. On Stoney Ridge, make board_reset() call cold_reset() to keep current behaviour of common code calling hard_reset(). But add a TODO if this is intended. Note: Stoney Ridge is using CF9 for the actual reset but the configuration for a cold reset doesn't use the usual full reset bit but some other mechanism. Change-Id: Id33eda676d79529db759b85fa8e28386846e6fa4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-22soc/samsung/exynos5250: Convert to `board_reset()`Nico Huber
Change-Id: I2f69d9f01ac5f7e28dd98e704f3280bf62b9ce58 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22soc/mediatek: Convert to `board_reset()`Nico Huber
Note, MT8183 didn't select HAVE_HARD_RESET before. So it might still need an update. Change-Id: Ic850f2775ada5e6e543ffb92aaa033b9209596f5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22soc/imgtech/pistachio: Convert to `board_reset()`Nico Huber
Change-Id: If8fc29c46e2cbc69f94ea8b6dc414a93d82ffb28 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22soc/rockchip/rk3399: Convert to `board_reset()`Nico Huber
Change-Id: Id07e1c7fbd35393ffafda53fc7a15ec0e157d075 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22reset: Convert individual boards to `board_reset()`Nico Huber
Change-Id: I6182da172ae2f4107a9b5d8190e4b3b10ed2f0b9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-19soc/lowrisc: Remove the remains of a LowRISC socPeter Lemenkov
Looks like we've got a race condition between commit ce8763fb with Change-Id I4e3e715106a1a94381a563dc4a56781c35883c2d ("mb/lowrisc: Remove the Nexys4DDR port") and commit 2e38dbe5 with Change-Id I5524732f6eb3841e43afd176644119b03b5e5e27 ("riscv: update mtime initialization"). Let's fix it. Change-Id: I03c5860b27d04b6e1d7868ba8ea7b52d1075aa6a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29165 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-19soc/intel/cannonlake: Enable HDA driver supportpraveen hodagatta pranesh
This patch selects common HDA driver and adds audio controller device id to enable audio on coffee lake platforms. BUG= None TEST= boot to yocto linux and windows os on CFL RVP11 & RVP8, verified audio functionalities. Change-Id: I4a60a4d7d8babcd0c14664a304ca81d47c668a6c Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29145 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18mediatek/mt8183: Add EMI init for DDR driver initHuayang Duan
Add EMI config to initialize memory. BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I945181aa1c901fe78ec1f4478a928c600c1b1dea Reviewed-on: https://review.coreboot.org/28835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-18mediatek/mt8183: Add register definitions of DRAM controllerTristan Shieh
Add register definitions of DRAM controller. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I8b51486deab856a783b87f0b2812a991d4111020 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-18cpu/amd: Use common AMD's MSRElyes HAOUAS
Phase 1. Due to the size of the effort, this CL is broken into several phases. Change-Id: I0236e0960cd1e79558ea50c814e1de2830aa0550 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-18soc/amd/stoneyridge: Replace double defined MISC MMIO reg. 0x40Richard Spiegel
Register 0x40 of miscellaneous MMIO is double defined, with different names, which makes it confusing. Eliminate MISC_MISC_CLK_CNTL_1, and move its only bit definition to MISC_CLK_CNTL1 (which is correctly placed among MMIO registers. BUG=b:117818431 TEST=Build grunt. Change-Id: I5ca5045498b8a81943282e0d6ecfbaecbd600d19 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-18soc/amd/stoneyridge: Remove double defined SPI100_SPEED_CONFIGRichard Spiegel
SPI100_SPEED_CONFIG is double defined. Bits and shift definitions on the first definition are unused. Remove first definition and its associated bits and shifts. BUG=b:117818430 TEST=Build grunt. Change-Id: I8175b9a2f379b47475a71f93096f682bc56d051c Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-18soc/amd/stoneyridge: Remove double definition for wideioRichard Spiegel
WIDEIO_RANGE_ERROR and TOTAL_WIDEIO_PORTS are defined twice. Remove the definitions within MMIO definitions, as wideio is not related to MMIO. BUG=b:117814228 TEST=Build grunt. Change-Id: I370a5b387b908fe7a840eb7579d45c1a6a9ca615 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-18soc/amd/stoneyridge: Remove DEV_D18F4 definitionRichard Spiegel
The definition DEV_D18F4 is only used once, in file tsc_freq.c, and is the same as SOC_PM_DEV. Remove the definition, and replace its use in tsc_freq.c with SOC_PM_DEV. BUG=b:117754424 TEST=Build and boot grunt. Change-Id: I9eeeaa084e5b16280713b8b833b4faa78d277586 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-18soc/amd/stoneyridge: Remove double defined GPIO MMIO basesRichard Spiegel
GPIO control a mux base addresses are defined within MMIO definitions and again bellow as GPIO specific base addresses. Eliminate those outside MMIO bases. Rename them to something indicating that they are both MMIO and related to GPIO. BUG=b:117754420 TEST=Build grunt. Change-Id: I53f7cf17d6267e6f8daa650b5f864bab688dc3f0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29156 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18amd/stoneyridge/include/soc: Re-arrange NB IOAPIC definitionsRichard Spiegel
There's no indication that they are accessed through D0F0. Add a D0F0 header and move IOAPIC definitions under it. The registers defined to be accessed through index/data pair should be indented relative to the index/data pair definition. BUG=b:117754786 TEST=Build grunt. Change-Id: If4fb6514bb13f1c944d0e1756d8d9de1f08c99f3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29155 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18soc/amd/stoneyridge/smi.c: Prefer using '"%s...", __func__'Richard Spiegel
In function smm_setup_structures(), the function name is used in a print string. Use __func__ instead. BUG=b:117642170 TEST=Build grunt. Change-Id: Icac5ea997289ef75fb246a09715cbca4442a57f4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29154 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18soc/amd/stoneyridge/southbridge.c: Change comparison orderRichard Spiegel
Comparison should place the constant on the right side. Southbridge.c has 6 instances where the opposite happens. Reverse the order of six comparisons to eliminate checkpatch warnings: WARNING: Comparisons should place the constant on the right side of the test BUG=b:117656929 TEST=Build grunt. Change-Id: I94f17b81f845fa94599f93c0be1144ffcb8e4165 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29153 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18soc/amd/stoneyridge: Remove "else" after a returnRichard Spiegel
File smbus_spd.c has 2 instances of if()/else where the if tests for an error condition and returns just before the "else" statement. These "else" statements are not needed. BUG=b:117648025 TEST=Build and boot grunt. Change-Id: Ie8298773ae455dbb1125420ec65df24f3c65eb44 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29152 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18intel/common/block: Fix issue found by klockworkJohn Zhao
src/soc/intel/common/block/pmc/pmclib.c Function acpi_get_sleep_type: Pointer ps checked for NULL may be dereferenced. BRANCH=None TEST=Built & booted Yorp board. Change-Id: I15fe39fd9f930be56d03c2ffe62fb6f17249d4b5 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-18soc/intel/skylake: Prevent disabling of TCONaresh G Solanki
In Skylake/Kabylake, if ACPI PM timer is disabled then TCO also gets disabled & vice versa. FSP default config for EnableTcoTimer is disabled, this caused ACPI PM timer & TCO to be disabled by FSP even when config PmTimerDisable = 0. Thus update FSPS UPD EnableTcoTimer in accordance to devicetree config PmTimerDisable. BUG=None TEST= Build for Soraka with PmTimerDisable=0 & check if TCO caused reboot after running shell command: cat >> /dev/watchdog0 Change-Id: Ia146761036c9dbaef3c02c9a7122ae3dcdef7bdd Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/29108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-10-17soc/intel/cannonlake: Add CNP PCH-H gpio pin definitionspraveen hodagatta pranesh
- CNL PCH-H has 12 GPIO groups which are grouped under 5 gpio communities. - Add gpio pin definitions for CNP-H and related changes. - Add gpio device name, host software ownership reg offset for CNP-H. BUG: none TEST: build and flash, boot to windows and yocto os on both CFL RVP8 & RVP11 and verify power management, IO device functionalities work fine. Change-Id: I496ec059de125b97c646581bbd3b8bfe6ffa641e Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-17soc/intel/cannonlake: Add new cannon lake PCH-H supportpraveen hodagatta pranesh
Cannon lake PCH-H is added to support coffee lake RVP11 and coffee lake RVP8 platforms. - Add new device IDs for LPC, PCIE, PMC, I2C, UART, SMBUS, XHCI, P2SB, SRAM, AUDIO, CSE0, XDCI, SD, MCH and graphics device. - Add new device IDs to intel common code respectively. - Add CPU, LPC, GD, MCH entry to report_platform.c to identify RVP11 & RVP8. - CNL PCH-H supports 24 pcie root ports and 4 I2C controllers, hence chip.c is modified accordingly. - Add board type UserBd UPD to BOARD_TYPE_DESKTOP for both RVP11 & RVP8. BUG=None TEST=successfully boot both CFL RVP11 & RVP8, verified all the enabled devices are enumerated and cross checked devices ids in serial logs and UEFI shell. Change-Id: I4b6af88d467382250aecb4102878b1c5af92ccd4 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28718 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17mediatek/mt8183: Add USB supportJumin Li
This patch implements SoC-specific defines of mt8183 and links the common code to support USB. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1224cf24f92b07f3c1814f1cbfef96aafa5a992b Signed-off-by: Jumin Li <jumin.li@mediatek.com> Reviewed-on: https://review.coreboot.org/28787 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17mediatek: Refactor USB code among similar SoCsTristan Shieh
Refactor USB code which will be reused among similar SoCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I06fefb4149a489be991e13ddf624082d11e31765 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-17soc/cavium/cn81xx: Drop dead do_soft_reset() implementationNico Huber
Change-Id: I85f357739220f16497f65df1bb317d9d6eb54d9f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-14soc/amd/stoneyridge: Define PM USB Enable registerMarshall Dawson
Make #define definitions for PMxEF and replace the hardcoded values. Note that this doesn't change the current functionality of the source. The existing code has been propogated from the sb//hudson port, which seems to attempt to enable 100% of all OHCI and EHCI controllers that may be present in the system. Change-Id: I6018b0062730de19e3283a010144dfedc2b11423 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29075 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-14soc/amd/stoneyridge: Remove hudson EHCI debug controllersMarshall Dawson
Remove nonpreset controllers from the PCI device identifier function (ignoring any CONFIG_USBDEBUG_HCD_INDEX). The extra devices appear to be holdovers from the original sb/hudson source. TEST=Jam Makefile.inc to unconditionally build enable_usbdebug.c and verify proper BDF is returned in romstage and ramstage. Change-Id: I2e819d5e998922ad427c4a094c29a590f249a0d3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-14soc/amd/stoneyridge: Remove errant parenthesis in southbridge.hMarshall Dawson
Delete an unmatched opening parenthesis in the definition for the EHCI hub config register definition. This wasn't causing a problem unless EHCI debug was enabled. TEST=Jam Makefile.inc to unconditionally build enable_usbdebug.c and verify successful build Change-Id: I5f461d1573e416b5a8ee24329142e3c46b6a05e3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29073 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-14soc/amd/stoneyridge: Rearrange southbridge.h moreMarshall Dawson
Move the SPI base address register definition to D14F3. This was missed in: bba043 amd/stoneyridge: Rearrange southbridge.h Change-Id: Ia722339418c118bdf4b000bbf97ae4266e9b3be2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-12drivers/intel/fsp2_0: Hook up IntelFSP repoPatrick Georgi
With https://github.com/IntelFsp/FSP/pull/4 merged, this allows using Intel's FSP repo (that we mirror) to build a complete BIOS ifd region with a simple coreboot build, automatically drawing in headers and binaries. This commit covers Apollolake, Coffeelake, Skylake, and Kabylake. Skylake is using Kabylake's FSP since its own is FSP 1.1 and Kabylake's also supports Skylake. Another candidate (given 3rdparty/fsp's content) is Denverton NS, but it requires changes to coreboot's FSP bindings to become compatible. Cannonlake, Whiskeylake require an FSP release. Change-Id: I8d838ca6555348ce877f54e95907e9fdf6b9f2e7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28593 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-12amd/stoneyridge: Fix PmControl register size in SMI handlerMarshall Dawson
The AMD implementation of this register is only 16 bits. Change the source accordingly. TEST=Suspend/Resume a Grunt several times Change-Id: Ib900468cc1c790fa7d57bb6faa91aee012173f7a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Rename CGPLL_CONFIG definitionsMarshall Dawson
Shorten the names in the MISC CGPLL_CONFIG, and make the formatting match the surrounding source. Change-Id: I71cf1ff6bd4bca7a25484b4da9388c17cfecc043 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Rename GppClkCntrl fieldsMarshall Dawson
Make the field names of the MISCx00 GPPClkCntrl more manageable by shortening their names. Make the definitions look more like the rest of the header file. Change-Id: I515cd664808e38851a7dbdba899df4fb9bbbcde6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Rearrange southbridge.hMarshall Dawson
Group definitions so they're near others of the same type, e.g. PCI, AcpiMmio, etc. Change-Id: Ia6ef21431db0e758eba0ea043b54c036ec6235fe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Remove dead GPIO definitionsMarshall Dawson
Delete definitions that are no longer used. Change-Id: I94c9c33f73c1a2d9308408e3e9ca526e876d6135 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Clarify XHCI_PM register definitionsMarshall Dawson
Change-Id: I1b44ffd7c0244b0408c3823d634a9b8d5038462f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Fix SPI_CMD_TRIGGER coding styleMarshall Dawson
Make the whitespace match surrounding lines and remove unnecessary parentheses. Change-Id: I2ed02494ba69237c38af61317e435d9575cefe1c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Convert hex definitions to lower caseMarshall Dawson
Match the rest of the soc/stoneyridge source. Change-Id: I4531e6dad0362be73499647d9fc93c168b6f163e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Remove hudson register definitionsMarshall Dawson
Delete artifacts remaining from the original "hudson" and "yangtze" controller hub designs. Husdon devices had a configurable AcpiMmio base address, and a selection for I/O vs. MMIO decode. Modern products are fixed at 0xfed80000 in MMIO. Remove the flash control register definitions for the old generations. The manual reset register appears to not function as hudson. PMIO_DEBUG is named differently now, and not used, so remove its definition too. Change-Id: I6484bb2ca80b65318565dfee1a3368b121aea9de Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-11src: Move common IA-32 MSRs to <cpu/x86/msr.h>Elyes HAOUAS
Use "cpu/x86/msr.h" for common IA-32 MSRs and correct IA-32 MSRs names. Change-Id: Ida7f2d608c55796abf9452f190a58802e498302d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28752 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11src: Replace MSR addresses with macrosElyes HAOUAS
Change-Id: I849dd406f5ccc733d4957eaf1c774745782f531a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-10-11amd/stoneyridge: Indicate STAPM units in their nameRichard Spiegel
STAPM devicetree registers do not indicate the unit, which causes confusion. More importantly, the time was assumed to be in seconds when it's actually milliseconds. This caused early STAPM configurations to fail. BUG=b:117590953 TEST=Build grunt Change-Id: I2a7e3d43601992d1f7b02456913c763d940fe9ee Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29035 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11selfboot: remove bounce buffersRonald G. Minnich
Bounce buffers used to be used in those cases where the payload might overlap coreboot. Bounce buffers are a problem for rampayloads as they need malloc. They are also an artifact of our x86 past before we had relocatable ramstage; only x86, out of the 5 architectures we support, needs them; currently they only seem to matter on the following chipsets: src/northbridge/amd/amdfam10/Kconfig src/northbridge/amd/lx/Kconfig src/northbridge/via/vx900/Kconfig src/soc/intel/fsp_baytrail/Kconfig src/soc/intel/fsp_broadwell_de/Kconfig The first three are obsolete or at least could be changed to avoid the need to have bounce buffers. The last two should change to no longer need them. In any event they can be fixed or pegged to a release which supports them. For these five chipsets we change CONFIG_RAMBASE from 0x100000 (the value needed in 1999 for the 32-bit Linux kernel, the original ramstage) to 0xe00000 (14 Mib) which will put the non-relocatable x86 ramstage out of the way of any reasonable payload until we can get rid of it for good. 14 MiB was chosen after some discussion, but it does fit well: o Fits in the 16 MiB cacheable range coreboot sets up by default o Most small payloads are well under 14 MiB (even kernels!) o Most large payloads get loaded at 16 MiB (especially kernels!) With this change in place coreboot correctly still loads a bzImage payload. Werner reports that the 0xe00000 setting works on his broadwell systems. Change-Id: I602feb32f35e8af1d0dc4ea9f25464872c9b824c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/28647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-11tegra124_lp0: make sure to build with compiler.h includedPatrick Georgi
Fixes builds of that binary in clean trees. Change-Id: If5a995449a74c00da836fcf22bda44ebc8197518 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-11soc/intel/common/block/gpio: check for NULL using if statementBora Guvendik
Remove assert() and instead use if statement to check if comm->groups is NULL. Found-by: klockwork BUG=None TEST=Boot to OS Change-Id: I85a6bc700b52d04c61ca8f2baac62000f40cf2cb Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/28940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-10soc/intel/skylake: Set PCIEXPWAK_DIS if WAKE# pin is not enabledFurquan Shaikh
This change sets PCIEXPWAK_DIS in PM1_EN register if WAKE# pin is not enabled on the platform. This is required to prevent unnecessary wakes if the WAKE# pin remains not connected on the platform. Function to set PCIEXPWAK_DIS gets called in normal boot path (BS_PAYLOAD_LOAD) as well as S3 resume path (BS_OS_RESUME). BUG=b:117284700 TEST=Verified that no spurious wakes are observed on nocturne. Change-Id: Iea93baffc9bb703c0ffedacafc6a9a9410c7ebfe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-10-10soc/cavium: dynamic UART initialization for cavium cn8100Jens Drenhaus
Now only those UARTs that are enabled in devicetree.cb are initialized. Tested on Opencellular Elgon. Change-Id: I145c224148f0cc078bb1c76f588f603e73121a62 Signed-off-by: Jens Drenhaus <jens.drenhaus@9elements.com> Reviewed-on: https://review.coreboot.org/28975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-10soc/amd/stoneyridge/gpio.c: Create I2C slave reset codeRichard Spiegel
AMD's SOC do not wait for I2C transactions to complete before executing a reset. Because of this, it's possible for the reset to happen in the middle of a transaction, resulting on a slave hang. There are 2 possible solutions: If the slave has a reset pin connected to a GPIO pin, it can be used to reset the slave, else the only solution is to bang SCL 9 times. Create code that makes it easy to implement SCL bang, using a devicetree register to define which I2C SCL lines needs to be reset. BUG=b:114479395 TEST=Build and boot grunt. Look at transactions on a scope. Change-Id: I7f74b7e45c509044825355874753969f074e2382 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28574 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10mediatek/mt8183: Init PLLs for DRAMTristan Shieh
Set up DRAM related PLLs. And update post divider table to fulfill all freqency settings. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ic197cef7d31f75ffe4e7d9e73c9cc544719943ab Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/28667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-10-09soc/intel/cannonlake: Add PCIE ASL entrySubrata Banik
This patch creates _PRT entires for each PCIE root port devices. TEST=Able to see PCIE wake device in cat /proc/acpi/wake list Change-Id: I183c89c92139e15e0bfc39620710dbdc6597b351 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Make correct IRQ mapping for CNL SA and PCH PCI devicesSubrata Banik
This patch provides option for PCI IRQ mapping in both PIC and APIC mode. TEST=Build and Boot on CNL RVP. Change-Id: Ie26750ac9dc2ce940b0c116085c041de439075df Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/acpi: Fix ACPI Namespace lookup failure, AE_ALREADY_EXISTS ↵Subrata Banik
issue This patch fixes below ACPI compilation issue: Found 1 external control methods, reparsing with new information Pass 1 parse of [DSDT] ACPI Error: [EPCS] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) ACPI Error: [EMNA] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) ACPI Error: [ELNG] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) Pass 2 parse of [DSDT] ACPI Warning: NsLookup: Type mismatch on EPCS (Integer), searching for (RegionField) (20160318/nsaccess-664) ACPI Warning: NsLookup: Type mismatch on EMNA (Integer), searching for (RegionField) (20160318/nsaccess-664) ACPI Warning: NsLookup: Type mismatch on ELNG (Integer), searching for (RegionField) (20160318/nsaccess-664) Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions) TEST=Able to build sgx.asl without any ASL error. Change-Id: If4e7d4c66b6aab6c081fa272d8c2c9a1f0651ef7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/block/pcr: Add NULL pointer check in pcr_execute_sideband_msg()Subrata Banik
This patch to fix KW issue due to msg, data and response pointers NULL check fail. Change-Id: I39324514079f240ba1683a04e579de85485299bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Disable Legacy PME for Root portsSubrata Banik
Legacy PME are enabled by default in FSP-S UPD. This policy sets PME Interrupt Enable (PIE) bit of RCTL register to trigger interrupt generation when RSTS.PS state has changed (either due to 0->1 transition or due to this bit being set with RSTS.PS already set). Due to this interrupt generation, system wakes from sleep immediately it enters. This patch overrides root port legacy pme upd policy from coreboot to ensure no false SCI is triggerd when system is in S3/S0ix state. BUG=b:113083354 BRANCH=none TEST=Able to make S3 resume using wake on wifi connect/disconnect usecase without any failure. Change-Id: I779fac711eeeed65ea379fad1cc400052d8a00eb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Ensure FSP don't override ITSS IPCx registersSubrata Banik
This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Iea9356b4404d2fa49ea62ef7bc2c72f125054ff3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-09soc/intel/skylake: Ensure FSP don't override ITSS IPCx registersSubrata Banik
This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/pch: Select Kconfig for ITSS polarity configurationSubrata Banik
This patch selects Kconfig for Intel Core Platform in order to ensure proper ITSS IPCx programming. Change-Id: I81e75e17ceb23c364b78300c3950144be1580700 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08soc/intel/skylake: Fix ‘dev’ pointer NULL before being dereferencedSubrata Banik
This patch fixes KW issue due to pointer being NULL and will be dereferenced Change-Id: Iedb59daf5f448e31c0097873a086e4d08cd4a979 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28948 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08smmstore: Add a key/val store facility in flash, mediated through SMMPatrick Georgi
It exposes an interface that is as generic as possible, so payloads and/or kernels can use it for their data. Change-Id: I9553922f9dfa60b9d4b3576973ad4b84d3fe2fb5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/25182 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08src: Use tabs for indentationElyes HAOUAS
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28934 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-06soc/intel/common, mb/google, mb/siemens: Use lower case x for RXDFurquan Shaikh
In order to make the macro name consistent for all PAD_CFG1_IOSSTATE_* macros, this change uses lower case x for *RXD*. It helps avoid confusion when using the macros. Change-Id: I6b1ce259ed184bcf8224dff334fcf0a0289f1788 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28924 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-06soc/intel/common/block/hda: Enable static scanning of devices under HDAFurquan Shaikh
This change sets scan_bus operation for HDA to scan_static_bus to allow enumeration of static devices under HDA. BUG=b:112888584 TEST=Verified that devices added under HDA get enumerated on Nocturne. Change-Id: I20759c2b702b2f107f0913e7ce92a82c6070ddc4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28807 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-06soc/intel/.../hda: Add and use config for initialization of HDA codecsFurquan Shaikh
Config option SOC_INTEL_COMMON_BLOCK_HDA is currently used for initialization of HDA codecs only. This prevents adding of any static devices under the HDA device node. However, there can be boards which want to add devices under HDA node (e.g. nocturne that wants to provide DMIC properties to OS) without performing any codec initialization using the HDA. This change: 1. Adds a new config option SOC_INTEL_COMMON_BLOCK_HDA_VERB that can be set explicitly by the boards that want to perform codec initialization. 2. Uses newly added config option is used to guard the initialization functions for the codec. Rest of the device operations can still be used by all the other boards without having to use HDA codec initialization. 3. Selects the newly added option SOC_INTEL_COMMON_BLOCK_HDA_VERB in kblrvp which is the only board enabling HDA codec initialization using common block code. 4. Selects original config SOC_INTEL_COMMON_BLOCK_HDA for skylake SoC. Above changes need to be bundled and pushed in as a single change in order to avoid breaking existing users. BUG=b:112888584 Change-Id: Ie6f39c13a801833b283120a2d4b6f6175688999c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-05soc/intel/skylake: check for NULL with if conditionPratik Prajapati
This patch removes assert() and checks if the dev is NULL with "if" condition only. Found-by: klockwork Change-Id: Icd2c8490c8bda14ecd752437d463a7110fe40aea Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/28888 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05src: Fix MSR_PKG_CST_CONFIG_CONTROL register nameElyes HAOUAS
Change-Id: I492224b6900b9658d54c8cf486ef5d64b299687f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-10-05amd/stoneyridge: Comment PCI and AcpiMmio registers in ASLMarshall Dawson
TEST=Build Grunt BUG=b:77602074 Change-Id: I24a46cc3e766ba7e9199723b042476064a698bf2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-05amd/stoneyridge: Remove unused registers from ASLMarshall Dawson
Remove AcpiMmio and PCI config registers that are not used. TEST=build Grunt BUG=b:77602074 Change-Id: I62f40e421eba41c4a49d85efc975096171cb72fa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-05amd/stoneyridge: Remove SATA D0 on suspendMarshall Dawson
Remove the step of setting the SATA controller to S0 as the system is entering S3. This had been duplicated from AMD's FchCarrizo.asl file, but upon closer inspection, the conditions for this step to run cannot be met. This does not affect Grunt's behavior, as the SATA controller is disabled. TEST=Suspend and resume Grunt BUG=b:77602074 Change-Id: Ib269a5363d03c7048abd0c8a9a28df92a773790c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04soc/intel/cannonlake: Move the FSP related callbacks to separate filesRizwan Qureshi
Move funtions callbacks used to override FSP upd values to separate files. This serves as a base change for SoCs for which FSP is still under development, and hence the FSP header files are not available yet and in turn the UPDs cannot be referred. These newer SoCs will implement empty callbacks. The code will compile with basic header files which only include the architectural FSP structures. This allows plugging in these separate files for compilation in an environment where FSP header files are available. The fact is, FSP header files are not released externally until PRQ. However the teams at intel and some partners have access to the development version of these files. This code refactor helps to continue development on the pre-PRQ silicons and submit related code to coreboot.org. BUG=None BRANCH=None TEST=Build for cnlrvp Change-Id: Iffadc57f6986e688aa1bbe4e5444d105386ad92e Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/28661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-04soc/nvidia/tegra124: Increase bootblock sizePatrick Rudolph
Increase bootblock size by 4KiB and reduce romstage by 4 KiB. Change-Id: I604fd9c63a4cf6fb7b18249a6d73cd637e184a71 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-04soc/intel/common: add acpi_get_sleep_type to pmclibBora Guvendik
Change-Id: I3f4123657a375211f802a7d484a15353f9a256e9 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/28795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com>
2018-10-04amd/stoneyridge: Use BIOS_DEBUG to log PM1 and PMxC0 statusEdward Hill
Use BIOS_DEBUG consistently to log PM1 and PMxC0 status registers on boot. print_num_status_bits() was already using BIOS_DEBUG. TEST=Inspect console for Grunt BUG=b:110788201 Change-Id: If7da8c7c86e90a661338903ad05cc41e11f507d2 Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://review.coreboot.org/28885 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04amd/stoneyridge: Prepare for vboot rebooting systemMarshall Dawson
Implement the function vboot_platform_prepare_reboot() which is normally a weak function. The SlpTyp field of the PM1 register is not reset to its default value when the APU restarts. This change prevents a failing condition if vboot decides to reset the system instead of allowing an S3 resume to continue. TEST=Resume Grunt when vboot attempts a reset, verify a fresh boot instead BUG=b:117089826 Change-Id: I6e0e3e541bad89ca5b23d6ddb6e5c0df7f762f10 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28877 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04src/soc/intel/cannonlake: Fix IA32_PLATFORM_DCA_CAP addressElyes HAOUAS
Change-Id: Id4f99e82bb97a260d654b49a2ba94fde207d318b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28847 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-03soc/amd/stoneyridge: Add IOMMU supportMarc Jones
Enable the IOMMU in AGESA and copy the AGESA generated IVRS ACPI table. BUG=b:116196614 TEST=Check dmesg for AMD-Vi messages. Change-Id: I688d867c7bd4949a57b27c1b6a793c6a6e4a717a Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/28753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-03soc/intel/commom/block/i2c: Make I2C controller out of resetSubrata Banik
This patch ensures I2C controllers are out of reset without any assumptions. BUG=b:116191230 BRANCH=none TEST=Dump MMIO offset 0x204 to check if I2C host controller is NOT at reset (by reading Bit 0-1 as 3) Change-Id: I4b335a834333e01cfa2d802e4aad0735d0212dcc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-02src/soc/intel/broadwell/me.c: Correct HMRFPO misspellingAngel Pons
`HMRFPO` was spelled as `HMRPFO` twice. Change-Id: Ibd04004ac5edcdeee49a6a69fcdd5c73603e92e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-02soc/intel/skylake: Fix spelling mistakeSubrata Banik
Make correct spelling for THERMAL_IRQ macro in irq.h file. Change-Id: I83593822e2abbb07e60fc336b774199fea3b368f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2018-10-02soc/intel/skylake: Replace white space with tabSubrata Banik
This patch unified line indentation. Change-Id: Ife3396e36a0684490d9ed9b31b4c0a543a3e3d24 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2018-10-01amd/stoneyridge: Add USB ASL for D0/D3coldMarshall Dawson
Add methods, and call them, for transitioning EHCI and xHCI to D0 or D3cold. Add device objects necessary for waking the system via USB. In order for USB to wake the system, it must be in the D3cold state. Then on resume, its firmware must be reloaded. This code relies heavily on AMD's FchCarrizo.asl (delivered in NDA PI package), and has been modified to fit the coreboot ASL names. In addition, AMD's methodology is to generate a SW SMI for saving/restoring certain settings. This has been ported into U3D0 and U3D3, as the necessary registers are now publicly documented. BUG=b:77602074 Change-Id: I83d0dce13411601691318cc67c99adf291ccf3bb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28772 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-01amd/stoneyridge: Add ASL helper for AOAC PwrGood ControlMarshall Dawson
Add a method to assist with setting the PwrGood Control register, which will be useful for various devices. BUG=b:77602074 Change-Id: Ief602c4bc42d27b3e236d24db815b990f3a2419c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-01amd/stoneyridge: Add FCH WAK and PTS methodsMarshall Dawson
Add methods that can be used for preparing all controller hub devices for sleep, and that will turn the devices back on. BUG=b:77602074 Change-Id: I4b0c48e96aff23b4c31c9e89582b9fa80dba7bda Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28770 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-01amd/stoneyridge: Add ASL for D-states on AOAC devicesMarshall Dawson
Duplicate ASL from AMD's FchCarrizo.asl (available in NDA PI package) that can put AOAC devices into D0 or D3cold. The argument numbers coincide with the AOAC register offsets for the various devices. SATA, USB, and SD require additional device configuration. Add a placeholder and mark as todo. BUG=b:77602074 Change-Id: I32426f744a5ebbad9e8d3f2f37c4d214ad6dd3d4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28769 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-01amd/stoneyridge: Add ACPI MMIO and PCI offsets to ASLMarshall Dawson
Define various AMD_SB_ACPI_MMIO_ADDR registers at 0xfed80000. Define various PCI config space registers. These are duplicated from AMD's FchCarrizo.asl file. BUG=b:77602074 Change-Id: Ie7447fef682424b05fa912b60c7b80112c6202de Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28768 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-01amd/stoneyridge: Load AOAC and USB gnvs valuesMarshall Dawson
Indicate the devices that are enabled. This is somewhat rudimentary, but could be improved in a later patch (e.g. get settings from devicetree). Calculate values that may be used for reinitializing the xHCI firmware. Add the EHCI BAR's current base address to gnvs. BUG=b:77602074 Change-Id: I8af69c030eb2353ad75beeb2bfd3bef24abff04c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28767 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-01amd/stoneyridge: Add USB settings to gnvsMarshall Dawson
A later patch will rely on two USB settings from the BIOS. Add these to the global_gnvs_t structure. The first is a data that will be used to locate the xHCI firmware for reloading after a resume. Although the existing calculations will be somewhat simple, keeping this on the coreboot side will help in the event multiple FWs are eventually in the build. The second item is a usable EHCI base address that may be programmed during S3 suspend and resume. At the time the PTS and WAK code runs, the BAR will be clear. BUG=b:77602074 Change-Id: I32205ac8a6908cca4a38dd68a7c7b591e76c06bb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-01amd/stoneyridge: Create gnvs entries for AOAC devicesMarshall Dawson
A later patch will leverage AMD's ASL support for handling AOAC devices. This will gather coreboot's device enables from a bitwise field, where each bit corresponds to the register offset used to control each devices. Create an identical structure, and add it to the nvs ASL and global_nvs_t structure. BUG=b:77602074 Change-Id: I40f0161cc0bbc574ad703e34278372f2504de100 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-01soc/intel/fsp_broadwell_de: Fix IA32_MC0_* namesElyes HAOUAS
Regarding the SDMs, IA32_MC0_STATUS register is at 0x401, and IA32_MC0_CTL is at 0x400. So replace MSR at (0x400+1) by IA32_MC0_STATUS and the one at 0x400 by IA32_MC0_CTL. Change-Id: I3f53c80f39078bd0c47c25013657e1169fc6c4a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-09-30soc/cavium/cn81xx/spi: Add function to return SPI clockPatrick Rudolph
Change-Id: I07c95b9ea14d47da0497470487fa3f162f8012c8 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 03:09:16 +0000