| Age | Commit message (Collapse) | Author |
|---|
|
Instead of manually crafting S:B:D:F numbers for each PCI device
search for the devices by PCI vendor and device ID.
This adds PCI multi-segment support without any further code
modifications, since the correct PCI segment will be stored in the
devicetree.
Intel Document-ID: 735086
Intel Document-ID: 612246
Tested: On SPR 4S all PCU on all 4 sockets could be found and locked.
Change-Id: I06694715cba76b101165f1cef66d161b0f896b26
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80093
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Port fix from Alder Lake to not set/reset IOM MCTP during
D3 cold entry or exit.
Ports 5008d340033d ("soc/intel/adl: Remove IOM Mctp command from TCSS
ASL"):
> Recently as part of s0ix hang issue, it was found that sending IOM
> MCTP command as part of TCSS D3 Cold enter-exit sequence created an
> issue.
> We discovered that due to change in hardware sequence, ADL should not
> set/reset IOM MCTP during D3 cold entry or exit. This patch removes
> the bit setting from ASL file to prevent hang in the system.
> This patch also removes obsolete Pcode mailbox communication which
> is no longer required for ADL.
> BUG=b:220796339
> BRANCH=firmware-brya-14505.B
> TEST=Check if hang issue is resolved with the CL and no other
> regression
> observed
> https://review.coreboot.org/c/coreboot/+/62861
Test: build/boot drobit to Win11. Verify TCSS XHCI power management
working and USB Root Hub doesn't Code 43 in device manager
Change-Id: I40a537fd2b0c821caf282f52aaff1874f54325f1
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80719
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Port 9c348a7b7ea3 ("soc/intel/alderlake: Fix processor hang while plug
unplug of TBT device") from Alder Lake to fix a similar issue present
on Tiger Lake:
> Processor hang is observed while hot plug unplug of TBT device. BIOS
> should execute TBT PCIe RP RTD3 flow based on the value of
> TBT_DMA_CFG_VS_CAP_9[30]. It should skip TBT PCIe RP RTD3 flow, if
> BIT30 in TBT FW version is not set.
> BUG=b:194880254
> https://review.coreboot.org/c/coreboot/+/56503
Change-Id: Ie5409111d4239be86c0b153f01b4fe5fc6af352c
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80718
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't attempt to open a PMIO window for a resource which doesn't have
the IORESOURCE_ASSIGNED flag set, since there is no point in doing so
and there's a high likelihood that the base address is 0, which will
throw an error.
TEST=build/boot purism/librem_cnl (Mini v2), ensure no errors in cbmem
log for attempting to open a PMIO window for unaassigned resources with
base address 0.
Change-Id: Ifba14a8f134ba12d5f5e9fdbac775d4f82b4c4de
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
When we're building non-AMD processors, don't bother building amdfwtool
unless we're specifically building all of the tools like for abuild.
Change-Id: I9021674a06d65a79e24020790d317ab947c505fe
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80714
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Starting from MT8195, MediaTek platform supports "dram adaptive" to
automatically detect dram information, including channel, rank, die
size..., and can automatically configure EMI settings. So we can just
pass a placeholder param blob to `mt_mem_init_run` by enabling this
option.
Platforms (MT8173, MT8183, MT8192) which do not support "dram adaptive"
need to implement `get_sdram_config` to get onboard DRAM configuration
info.
TEST=emerge-geralt coreboot && emerge-asurada coreboot
TEST=CONFIG_MEDIATEK_DRAM_ADAPTIVE is set to y on geralt
TEST=CONFIG_MEDIATEK_DRAM_ADAPTIVE is no set on asurada
Change-Id: I05a01b1ab13fbf19b2a908c48a540a5c2e1ccbdc
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Mainboards using Intel Twin Lake (TWL) SoC shall select
SOC_INTEL_TWINLAKE.
BUG=none
BRANCH=firmware-nissa-15217.B
TEST=Build and boot Google/Yaviks with Twin Lake kconfig enabled
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ie4c5d137ee54512313344f853e7ca66d1fd25003
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80688
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Glinda started as a copy of mendocino and GPP_CLK_OUTPUT_AVAILABLE was
not updated. GPP_CLK_OUTPUT_AVAILABLE should be 7 as per Processor
Programming Reference (PPR) (#57254), table "GPP ClkREQB Mapping".
Change-Id: I26e9dea58b2ddf5cbedbcccb8bcbc5f9efab3165
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80701
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use clrsetbits32p instead of clrsetbits32 to not need to cast the
uintptr_t address to void * in the function call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic29bf04866a7e1d5c831422f31803a724a41069b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
In follow up to commit 0452d0939e7d ("soc/amd: Factor out gpp_clk_setup function") use gpp_clk_setup_common for glinda as well.
Change-Id: If0c1cda0d36de48c7f7315a1b8203b0e53f63f75
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80699
Reviewed-by: Anand Vaikar <a.vaikar2021@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use uintptr_t for the IOAPIC base parameter of the various IOAPIC-
related functions to avoid needing type casts in the callers. This also
allows dropping the VIO_APIC_VADDR define and consistently use the
IO_APIC_ADDR define instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I912943e923ff092708e90138caa5e1daf269a69f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80358
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
This function turns off gpp_clk for the devices which are disabled, and
adds the code to fix up the clock configuration depending on dxio
descriptors. Also this brings glinda in line with cezanne, mendocino,
phoenix and picasso. This also prepares glinda to use the common
function gpp_clk_setup_common.
Change-Id: Id66d1b7f0d8ec9a7cbd378ad6ad7d68eeab531f0
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80415
Reviewed-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
System sleep time (SLP_S0 signal asserted) is measured in ticks, for
Alder Lake soc in 122us (i.e. ~8197Hz) granularity/ticks.
BUG=b:301854636
TEST=/sys/devices/system/cpu/cpuidle/
low_power_idle_system_residency_us" will show system idle residency time
Change-Id: I449f7ed0d9ef891ae5266e8fd784a063a75e38eb
Signed-off-by: Marx Wang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Since the ACPI code is looking for VtdBars, that only appear on
Vtd devices, search for the Vtd device in devicetree.
With the previous commit the VtdBar is now exposed as a resource
on the Vtd device and thus can easily be accessed and used.
Drop the FSP HOB parsing and just use coreboot native functions.
Allows the code to work with multiple PCI segment groups.
Change-Id: I2c752dc595ac4c901f2b3a96718e256e413c76a7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Provide a helper function to locate PCI devices on a given socket
by their PCI vendor and device IDs and functions to return
information about the current device, like the corresponding stack
and socket.
In addition add functions to return "location" information, like stack
and socket affiliation.
This becomes handy when locating devices and generating ACPI code.
Change-Id: I266360588548ba579f46b228c4d5b3ae6e39a029
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80094
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Read the VtdBar and add it to the resources of the host bridge PCI
device. The BAR is already marked as PciResourceMem32 in the parent
PCI domain.
This allows easy probing for VTD devices with enabled VtdBars in the
next commit, without the need to look up the stack HOB.
Change-Id: Id579a94e653473f3dd0dccea6e33dc64f792d028
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
If a downstream LPC device (eg, SIO function) is disabled, we shouldn't
attempt to open PMIO windows for it, as those functions often have
unset IO bases (which default to 0), resulting in false errors like:
[ERROR] LPC IO decode base 0!
TEST=build/boot purism/librem_cnl (Mini v2), verify no LPC IO errors
in cbmem log for disabled SIO functions.
Change-Id: I92c79fc01be21466976f3056242f6d1824878eab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The get_gpio function in this file is both unused and it shouldn't use
a signed int to pass in the MMIO base address and offset.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3b08bad040ad175b37175ef21d0a0a29525c4478
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
As there are multiple Vtd devices, print the path of each when reporting
resource registers.
Change-Id: I5d3a6484ed7c7b9760fce0f3a02a15ca26c2cbd2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80549
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
The lower bit of the BAR might be used for something else,
like enable bits, so mask the lower 12 bits and align all
base address to 4K.
Confirmed that all BARs have a minimum alignment of 4K, so that
masking the lower bits doesn't change the reported address.
The alignment of the VTD BARs is:
- VTD_MMCFG_BASE_CSR 64 MiB
- VTD_MMIOL_CSR 1 MiB
- VTD_NCMEM_BASE_CSR 64 MiB
- VTD_TSEG_BASE_CSR 1 MiB
- VTD_BAR_CSR 4 KiB
Change-Id: I9a7b963c0074246616968dd15c147f4916297d59
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
IOAT logics are optimized out for non-IOAT platforms where
CONFIG(HAVE_IOAT_DOMAINS) as false.
This patch puts CONFIG(HAVE_IOAT_DOMAINS) check together ahead
of is_ioat_iio_stack_res() check in the corresponding if
statement to fulfill the optimization outs.
TEST=intel/archercity CRB
Change-Id: I2d16c6ff5320bc9195a1033b6d55e3d997b19b88
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80683
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ADL-M is not commercially available, so it can be removed.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If769989f7a0434e32ebbcc8eac9b965b70ca71ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The ACPI is adjusted based on SOFTWARE_CONNECTION_MANAGER, so set
the UPD to match this to avoid the connection type being mismatched.
If it's mismatched, the TBT port will time out.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8a99db165301ce08caf55aac0e33ca1994559d62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80486
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The base for this region is a magic number and none for the fields are
used, which likely means this was simply copied from a different
firmware.
Change-Id: I217bbd0b098cd15ef296854cc6262d651f11d10e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73183
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds support for using ADL N 4-core MCH ID 0x4618.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7b9fc64ccf8e2401dcd55607e8f09b348efb3182
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80166
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Macros MAX_ACPI_MEMORY_AFFINITY_COUNT and MAX_SRAT_MEM_ENTRIES_PER_IMC
are ACPI table specific, and could be used across Xeon-SP SoCs.
This patch moves their definition from FSP header to Xeon-SP layer
ACPI header.
TEST=intel/archercity CRB
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: I6c3a84b04a452bc8d4217947a7d12f050c94b56b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80629
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the definition of SRAT memory flags (SRAT_ACPI_MEMORY_ENABLED
and SRAT_ACPI_MEMORY_NONVOLATILE) from FSP header to ACPI common
codes.
TEST=intel/archercity CRB
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: I6aa5c20c9556fd5d680406518d19a83801b0852c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
IOAT is the term for the on-chip accelerator technology of
Xeon-SP. In CPX and SPR, IOAT stack is also named as DINO stack.
Different SoC has different check criteria for IOAT stacks,
this patch introduces an util function to abstract these differences
as well as cleaning up the usage of names.
TEST=intel/archercity CRB
Change-Id: I376928ad89b68b294734000678dad6f070d3c97d
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80578
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select this at the SoC level (like other modern Intel SoCs), and drop
it from individual boards which selected it.
Change-Id: I838ada7dfe948c58a5bb9805ade289b07368aa63
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch adds support for using ADL N 4-core MCH ID 0x4618.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3e4855ce93666c54ab35def9b58e4b13bc9a8672
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch adds ADL N 4-core MCH ID 0x4618.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I47bd8fa991a48d30be4975b7965f2c3c859836dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80487
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PcieRpEnable option is redundant to our on/off setting in the
devicetrees. Let's use the common coreboot infrastructure instead.
Thanks to Nicholas for doing all the mainboard legwork!
Change-Id: Iacfef5f032278919f1fcf49e31fa42bcbf1eaf20
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79920
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PcieRpEnable option is redundant to our on/off setting in the
devicetrees. Let's use the common coreboot infrastructure instead.
Thanks to Nicholas for doing all the mainboard legwork!
Change-Id: Iea7f616f6db579c06722369c08de7cf7261dece8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79919
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only call fill_pds() once to prevent leaking memory. Previously it was
called for every active stack on every socket.
Only call dump_pds() once to prevent spamming the console with the same
information.
Drop the return value since it's always returning success.
Change-Id: Ifa9609e9da086dc9731556014ea9b320b270d776
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The struct map_entry has two zero'd entries due to the ifdef
being used. Do not read those entries and do not print those
entries.
Fixes a NULL string being printed along as the vendor and device
ID of the PCI device.
Change-Id: Id87ced76af552c0d064538f8140d1b78724fb833
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80546
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch eliminates coreboot from loading microcode from RW CBFS
(when the RO descriptor is locked, which indicates a fixed RO image)
because the kernel can already patch the microcode on BSPs and APs
while booting to OS.
This may be a chance to lower the burden on the AP FW side because
patching microcode on in-field devices is subject to firmware updates,
which are rarely published and, if required, must go through the
firmware qualification testing procedure (which is costly, unlike
kernel updates for ucode updates).
1. The FIT loads the necessary microcode from the RO during reset.
2. Reloading microcode from RW CBFS impacts boot time
(~60ms, core-dependent).
3. The kernel can still load microcode updates.
ChromeOS devices leverage RO+RW-A/RW-B booting. The RO's microcode is
sufficient for initial boot, and the kernel can apply updates later.
BUG=none
TEST=Verified boot optimization; in-field devices skip RW-CBFS microcode
loading when RO is locked.
Change-Id: Ia859809970406fca3fa14e6fa8e766ab16d94c8a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
Select this at the SoC level (like other modern Intel SoCs), and drop
it from individual boards which selected it.
Change-Id: I8ebb915fbc21f82e39304473b0fcaa620559b5d5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80558
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add an ACPI stub containing the TCPU device in proper scope, along with
the device status, on boards not using the DPTF driver, so that there
exists an ACPI device to be referenced from the PEPD LPI constraint
list.
Adding the stub fixes an AE_NOT_FOUND ACPI error under Linux for
_SB.PCI0.TCPU on boards with the SA thermal device enabled but which do
not use the Intel DPTF driver.
TEST=build/boot Linux,Win11 on purism/librem_cnl (Librem Mini v2).
Change-Id: I926d0461e5e0dfaf606102575c2be555a6bfb695
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This is now generated by acpigen in the common/block/sata module.
Change-Id: Ic45a059f47a090aa1993e83884408a82826b30cf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
acpi_device_path() includes the device name, so we end up with:
Scope (\_SB.PCI0.SATA) {
Device (SATA) {
...
Fix this by using acpi_device_scope() instead.
TEST=build/boot purism librem_cml (Mini v2), dump ACPI and verify
SATA device scope correct.
Change-Id: Ibbc8890d93b22f0ecba4b3a9b0531994574b3d55
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80554
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Ie7bc4f3ae00bb9601001dbb71e7c3c84fd4f759a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80596
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3fb4c6cfe24290c34682ff1c3396540465048727
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Ie0d25eca75225ab33e6c15ef5ccb9073151f4148
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch increases the IgdDvmt50PreAlloc value as per Intel
recommendation starting with GFX PEIM 103x.
TEST=Able to build and boot google/rex.
Change-Id: I236b38a1ac5efbfcd23e373c09204d8a07b97618
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80406
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Rename tcss_mux_init to disconnect_tcss_devices to make it clear
what this function is doing, as it doesn't initialise anything.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5e43f0cca9d49bc30fc189663490a306efd71584
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79874
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: Ifa5c89aad7d0538c556665f8b4372e44cf593822
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80433
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Improves code maintainability and potentially reduces redundancy by
using the IA common implementation.
Additionally, drop the unused macros from SoC local.
TEST=Build and boot successful on google/marasov.
Change-Id: I290fea99f04cfc9f18e5f1435ed07de42995869f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80403
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Improves code maintainability and potentially reduces redundancy by
using the IA common implementation.
Additionally, drop the unused macros from SoC local.
TEST=Build and boot successful on google/screebo.
Change-Id: Ie0baae1d3b0093389649dee3531902c5e86c02fe
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80404
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This commit streamlines code and strengthens common code robustness
by moving the following SoC-layer functions to the common layer:
- sa_get_mmcfg_size: Retrieves the MMIO (Memory-Mapped I/O)
configuration space size by reading offset
0x60 of the PCI Host Bridge (D0:F0).
- sa_get_dsm_size: Calculates the size of the DSM (Device Stolen
Memory) by reading offset 0x50 of the PCI
Host Bridge (D0:F0) to determine pre-allocated
memory for the IGD (Integrated Graphics Device).
- sa_get_gsm_size: Calculates the size of the GSM (Graphics Stolen
Memory) by reading offset 0x52 of the PCI Host
Bridge (D0:F0).
- sa_get_dpr_size: Determines the size of the DMA Protection
Range (DPR) by reading offset 0x5C of the PCI
Host Bridge (D0:F0).
TEST= Build and boot successful on google/screebo.
Change-Id: Ic00e001563ec6f0d737a445964c716b45db43327
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
In follow up to CB:80285 use gpp_clk_setup_common for picasso as well.
Change-Id: I68d498d08d5975037086c84ff2f7fdb265ee84d9
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80414
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function turns off gpp_clk for the devices which are disabled, and
adds the code to fix up the clock configuration depending on dxio
descriptors. Also this brings picasso in line with cezanne, mendocino
and phoenix. This also prepares picasso to use the common function
gpp_clk_setup_common.
Change-Id: Ice2e3a5a78359da9a438434c7d4aa1eca878d396
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80413
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Leverages common SA header definitions for Host Bridge registers.
Renames DSM_BASE_ADDR_REG to BDSM and DPR_REG to DPR for brevity.
Additionally, made some minor code alignment corrections while
adding newer macros in the header file.
TEST= Build and boot successful on google/screebo.
Change-Id: I476f213d75a0978336b3749a5ba1499107eb2238
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: sridhar siricilla <siricillasridhar@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
gpp_clk_setup code in most AMD SoC is similar and it can moved to common
code. The only thing which is SoC dependent in this function is the SoC
config, hence keep it in SoC code and move everything else in new
gpp_clk_setup_common function which is in soc/amd/common. Picasso and
Glinda don't have pcie_gpp_dxio_update_clk_req_config fixup function so
they are addressed in later patches.
Change-Id: I7d7da4bfe079f07e31212247dbf3acd14daa6447
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80285
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of S:B:D:F numbers pass the struct device to
acpi_create_srat_gia_pci and let it extract the information needed.
This also adds support for PCI multi segment groups.
Change-Id: Iafe32e98f0c85f14347695ccaa0225e43fad99e7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80258
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of a BDF number store a pointer to the device itself.
Change-Id: I3fef93c5e54c8af792102bcd25364c43b554a5f0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I84a7b7b1b2c45b773c6f10b39e7813db3f96546e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80408
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In commit 30f36c35e75a ("soc/amd: rework DRAM and fixed resource
reporting") the reporting of the DRAM resources was moved from the
northbridge PCI device to the domain device. amd_pci_domain_fill_ssdt
didn't skip those DRAM resources when generation the resource producer
ranges which made Windows 10 very unhappy when it tried to evaluating
the ACPI tables causing it to reboot in a loop. To fix this, add a check
to also skip the resources that have the IORESOURCE_STORED flag set when
generating the resource producer ranges for the PCI root.
TEST=Windows 10 now successfully boots and reboots again on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b6d3fd8c7f89aa4364de7963d745aef8d6b6f42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80407
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
It seems that we have some applications where we need to calculate a GCD
in 64 bits. Now, we could instantiate the algorithm multiple times for
different bit width combinations to be able to use the most efficient
one for each problem... but considering that the function usually only
gets called once per callsite per stage, and that software emulation of
64-bit division on 32-bit systems doesn't take *that* long either, we
would probably usually be paying more time loading the second instance
of the function than we save with faster divisions. So let's just make
things easy and always do it in 64-bit and then nobody has to spend time
thinking on which version to call.
Change-Id: I028361444c4048a0d76ba4f80c7334a9d9983c87
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80319
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This makes it easier to reuse, e.g. if you want to do it twice in one
assembly file.
Change-Id: Ida861338004187e4e714be41e17c8447fa4cf935
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=b:248612503
TEST=Test with crrev.com/c/4756330
BRANCH=none
Signed-off-by: Yi Chou <yich@google.com>
Change-Id: I3dded9042abd85a948598f98475c21a1af9b4d80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80315
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
In case where PAD_CFG_GPI_INT() is initialized with a pin value
lower to PAD_CFG_GPI_IRQ_WAKE() for same GPIO community
the set_ioapic_used() is only called for the PAD_CFG_GPI_IRQ_WAKE() pin.
Due to this the IRQ associated with PAD_CFG_GPI_INT() is found free by
find_free_unique_irq() during IRQ assignment and assigned to other pins
which causes IRQ conflicts
BUG=b:322984217
BRANCH=None
TEST=Boot test on brox, check if correct IRQ assigned to EC
Change-Id: I8c3d557e888b8d0ceac203f49b702910fba26d6d
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80334
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Printing the data fabric MMIO decode window configuration might be
useful and it also aligns this SoC more with the other AMD family 17h+
SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I52f6655a5c63e31165549dcb6f5f95d4e74bad3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Drop the unneeded data_fabric_set_mmio_np function and the corresponding
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGION Kconfig symbol. In systems
with only one FCH, its MMIO region will be subtractively decoded and
there's no need to add a non-posted data fabric MMIO region after the
FSP/openSIL has already configured the data fabric decode windows. In
systems with more than one FCH, openSIL will already take care of
initializing everything for the additional FCH, so we also won't need to
do anything in that case. Since dropping this function also removes both
data_fabric_print_mmio_conf calls before and after adding the unneeded
non-posted MMIO region, replace the data_fabric_set_mmio_np call with a
data_fabric_print_mmio_conf call to still print the data fabric MMIO
decode regions set up by the FSP/openSIL.
TEST=Mandolin still boots successfully
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I474b6e066060abb3fe5b78505521c7782cc192ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Remove hardcoded B:D:F numbers for the first socket and pass the PCI
addresses to be locked within SMM by using the smm_pci_resource_store.
This allows to lock down SMM on all sockets without knowing the actual
bus topology or PCI segment group at compile time where the UBOX devices
reside on.
Tested: SMM is locked on all 4 sockets instead of just one.
Change-Id: Ica694911384005681662d3d7bed354a60bf08911
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80247
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, SOC_INTEL_COMMON_BLOCK_TCSS will set MUX to disabled. The two
related options to re-configure it for either USB devices or displays,
are currently only supported by the ChromeEC. As such, any device
without the ChromeEC will boot with attached USB-C devices in a
non-functional state.
Add TCSS_HAS_USBC_OPS to make this feature configurable, and set the
default to enabled if the board features the ChromeEC.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia848668ae9af4637fc7cffec9eb694f29d7deba9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79882
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: If0397f5cc8d0f4f1872bd37a001fe42e0c37ec96
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80301
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
This patch moves the IP checksum algorithm into commonlib to prepare for
it being shared with libpayload. The current implementation is ancient
and pretty hard to read (and does some unnecessary questionable things
like the type-punning stuff which leads to suboptimal code generation),
so this reimplements it from scratch (that also helps with the
licensing).
This algorithm is prepared to take in a pre-calculated "wide" checksum
in a machine-register-sized data type which is then narrowed down to 16
bits (see RFC 1071 for why that's valid). This isn't used yet (and the
code will get optimized out), but will be used later in this patch
series for architecture-specific optimization.
Change-Id: Ic04c714c00439a17fc04a8a6e730cc2aa19b8e68
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80251
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Make the initialization of the IOAPIC(s) in the PCI root(s) common
across all AMD family 17h+ SoCs. For this the more general
implementation from the Genoa code that supports multiple PC roots is
moved to the common AMD code. All other family 17h+ SoCs are then
adapted to use the common code. For those non-Genoa SoCs, the
initialization of this second IOAPIC is moved from the northbridge
device to the domain device above to match Genoa.
Test=Both the FCH IOAPIC and the PCIe root IOAPIC are still initialized
on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7c0ec6ac2f11cb11e46248cceec96c1fd2a49c16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80286
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the USB configuration data structure is FSP-specific, add guards
on this part of the soc_amd_phoenix_config struct and the corresponding
include.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6c324421fbc3dc7b9a7bf6f5868785e9718147a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80298
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since openSIL configures the APCI IO port addresses, coreboot should not
overwrite them.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If10e5a9f52ab313ad1afebd7f9e722994d48b0a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80297
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the calls to the openSIL stubs to do the silicon initialization, to
get the APCI IO ports, and to get the memory map.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6f37bf211e130cb44927f8a0e7f9134d246dfc1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80296
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The configuration of the PCIe clock generators in the FCH was moved from
the FSP to coreboot, since all registers are documented. This
initialization is however tightly integrated in the rest of the PCIe
init code inside the reference code. In the FSP case, this code was
manually removed. openSIL will do that part of the initialization so
that there's no coreboot-specific change needed in openSIL. This will
also avoid the problems caused by mismatching configurations done by the
coreboot code and the PCIe init part of the reference code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6d64285a301ade6860c07e62dcb1a718e7a96644
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
In the FSP case we get this info via a HOB. It's currently unclear if
we'll get a data structure for this from openSIL or if we'll end up
being able to just read the configuration fro the hardware, so add a
get_pci_routing_table stub for now to be able to build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5003e287d6a3a9320922beaffff8a3a846531e14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add the SOC_AMD_PHOENIX_OPENSIL Kconfig option to be able to build the
Phoenix code using openSIL instead of FSP for initializing the hardware.
Since there's currently no publicly available openSIL code for Phoenix,
SOC_AMD_OPENSIL_STUB is selected to have the stubs added to the build
instead of the actual openSIL code. The code added by selecting
SOC_AMD_COMMON_BLOCK_ACPI_CPPC relies on getting the information it
needs via a HOB, so for only select that option in the FSP case for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If597ff3dc824ce832399d3efde32352b36354b21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove the unused soc/platform_descriptors.h include and add the missing
types.h include.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0b066aa5dc657f7709f9cce734a025180bf5bfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Only add the vendorcode/amd/fsp/phoenix and vendorcode/amd/fsp/common
folders to the include search path when the SOC_AMD_PHOENIX_FSP Kconfig
option is selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I18668ab8578b297c328fdc647c8a95f540ac6272
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80288
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Provide 3 separate functions for each openSIL time point instead of one,
so that we don't need the xSIM-api header file to be included in
opensil.h to decouple the coreboot code more form the openSIL code. This
will allow to create an openSIL stub implementation to already get most
of the coreboot-side SoC code in place before the openSIL source code is
done and released.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I969bc0862560b7254c48f04e9a03387417f328bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Now that the SoC-specific memory map is reported on the domain device
instead of the northbridge device, factor out the
read_soc_memmap_resources function from root_complex.c to new memmap.c
file. For now each SoC still has its own memmap.c file, but the plan is
to eventually have a common implementation that works for all AMD family
17h+ SoCs. For that I'll still need to look closer into the differences
between the FSP and the openSIL integration though.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifd7659e9a55de9df24118b6d6c885a21dc6f14a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Only call read_fsp_resources if PLATFORM_USES_FSP2_0 is selected in
Kconfig.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic63e0904ad04dbecfac1be4d59abbb8d4f9f11d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since reporting the PCI ECAM MMCONF MMIO region and the IO ports for the
legacy PCI config space access is needed on all AMD SoCs, implement a
common add_pci_cfg_resources function that reports both and gets called
from amd_pci_domain_read_resources and don't report those in the SoC-
specific code any more. The only functional change is that on Genoa now
the IO ports used for the legacy PCI config space access get reserved.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibbcc2aea4f25b6dc68fdf7f360e5a4ce53f6d850
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
To make add_opensil_memmap match the other function that are directly or
indirectly called by amd_pci_domain_read_resources, pass the resource
index as a pointer instead of passing it by value and then returning the
new resource index.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6a17e488a01cc52b2dab5dd3e3d58bdf3acb554d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Introduce read_soc_memmap_resources which gets called by
amd_pci_domain_read_resources for the first domain of the SoC to report
the DRAM and PCI config space access resources to the allocator. For
Genoa this allows to use amd_pci_domain_read_resources as read_resources
in the genoa_pci_domain_ops instead of needing to wrap that call to be
able to call add_opensil_memmap for the first domain. For the other
family 17h+ SoCs the moves the reporting of the DRAM resources and the
PCI config space access resources from the northbridge device to the
domain device.
TEST=Resources still get reported on Mandolin, but now under the domain
instead of the northbridge PCI device
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib19fd94e06fa3a1d95ade7fafe22db013045a942
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80268
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use an unsigned long as resource index type instead of an int to match
the data type used for the index in the resource struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0f58e32a535326116460545287cc59aaf94166a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Use an unsigned long as resource index type instead of an int to match
the data type used for the index in the resource struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I60ac0e30627001698565b7256421780f9a94bf65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80266
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Previously the code checked if the first downstream bus of the domain
was bus 0 in segment group 0 to only run certain code for the first
domain. Instead check if the domain number is 0 which should make the
code a bit easier to understand.
TEST=add_opensil_memmap still gets called exactly once on Onyx
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id8cc0078843e5e0361a53ba897cde508cee16aad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Instead of manually crafting S:B:D:F numbers for every
VTD device loop over the entire devicetree by PCI DEV IDs.
This adds PCI multi-segment support without any further code
modifications, since the correct PCI segment will be stored in the
devicetree.
Change-Id: I1c24d26e105c3dcbd9cca0e7197ab1362344aa96
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80092
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Attach UBOX stacks on newer generation Xeon-SP.
In order to use PCI drivers for UBOX devices, locating UBOX devices
by vendor and device IDs and replacing device access by specifying
S:B:D:F numbers, add a PCI domain for the UBOX stacks and let the
PCI enumerator index all devices.
Since there are no PCI BARs on the UBOX bus the PCI locator doesn't
have to assign resources on those buses.
Once all PCI devices on the UBOX stack can be located without knowing
their UBOX bus number and PCI segment the Xeon-SP code can fully
enable the multi PCI segment group support.
Test: ibm/sbp1 (4S) is able to find all PCU devices by PCI ID.
Change-Id: I8f9d52dd117364a42de1c73d39cc86dafeaf2678
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80091
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The x86 core always starts with an IP at 0xfff0. This needs to match in
the code.
Change-Id: Ibced50e4348a2b46511328f9b3f3afa836feb9a5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Only call amd_fsp_silicon_init if PLATFORM_USES_FSP2_0 is selected in
Kconfig. I'm not 100% sure about the data_fabric_set_mmio_np call yet,
but since it doesn't depend on PLATFORM_USES_FSP2_0 to compile, I'll
look into that one later.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2666f1ac0f0354146ffe005b3ce99484defda7a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This renames bus to upstream and link_list to downstream.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Move the definition of the TCO registers used in most boards to a
separate file and use it consistently. Do not unify TCO for older
incompatible platforms.
BUG=b:314260167
TEST=none
Change-Id: Id64a635d106cea879ab08aa7beca101de14b1ee6
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Multiple links are unused throughout the tree and make the code more
confusing as an iteration over all busses is needed to get downstream
devices. This also not done consistently e.g. the allocator does not
care about multiple links on busses. A better way of dealing multiple
links below a device is to feature dummy devices with each their
respective bus.
This drops the sconfig capability to declare the same device multiple
times which was previously used to declare multiple links.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iab6fe269faef46ae77ed1ea425440cf5c7dbd49b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78328
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
CXL IIO stacks
When an IIO stack is connected with CXL cards, its bus range
will be divided by a PCI host bridge object and a CXL host
bridge object, otherwise, all its range will be owned by the
PCI host bridge object. Accordingly, CXL ACPI resources should
be only created when the IIO stack is connected with a CXL
card.
TEST=intel/archercity CRB
Change-Id: I6c1b1343991bc73d90a433d959f6618bbf59532f
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80087
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently resource allocation starts top down from the default value
0xfe000000. This does not match what ACPI reports, so adapt
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT to reflect that.
Change-Id: I32d08ffd5bbd856b17f7ca2775c5923957d92c85
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Adding downstream busses at runtime is a common pattern so add a helper
function.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic898189b92997b93304fcbf47c73e2bb5ec09023
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The CRAT (Component Resource Attribute Table) isn't used on the APUs
from Renoir on and has also been marked as deprecated in version 6.5 of
the ACPI specification. So remove the 'TODO: look into adding CRAT'
comment from all SoCs from Renoir/Cezanne on.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3ea1e3678608b0ace2a1ff7fc104594e90c91476
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80227
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the acpi_add_fsp_tables implementation is identical for all SoCs,
factor it out and move it to the common AMD FSP code. Also guard the
acpi_add_fsp_tables call in soc_acpi_write_tables with
if (CONFIG(PLATFORM_USES_FSP2_0)) to properly handle the FSP dependency.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8917a346f586e77b3b3278c73aed8cf61f3c9e6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80225
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Factor out acpi_add_fsp_tables from the soc_acpi_write_tables function
and move the remaining parts of the soc_acpi_write_tables function to
the SoC's acpi.c. This aligns the other family 17h/19h SoCs more with
Genoa and only leaves the FSP-specific code in agesa_acpi.c which will
be made common in a following patch. I decided against also renaming
agesa_acpi.c to acpi_fsp.c, since that would have made the diff less
readable and the files get deleted in a following patch anyway.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia87ac0e77c5e673e694703b85a4bab85a34b980e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Factor out the code to add the CRAT ACPI table into a separate file and
add the acpi_add_crat_table function that can then be called from
soc_acpi_write_tables to better isolate all code specific to the CRAT
table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a7853748512811d3d4e124224fcd459e527522c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80223
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
