summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2016-09-12fsp_broadwell_de: Correct access to SIRQ_CNTL registerWerner Zeh
The serial IRQ configuration register is only 8 bit wide so switch the PCI access from 16 bits to 8 bits. Change-Id: Ia9fbc02251e00b31440bf103e2afc2ff285b7f2e Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16534 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-09soc/intel/apollolake: Add functions to calculate GPIO addressVaibhav Shankar
Provide iosf and GPIO functions for GPIO address calculation. BUG=chrome-os-partner:55877 Change-Id: I6eaa1fcecf5970b365e3418541c75b9866959f7e Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16349 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-08fsp_broadwell_de: Adjust printed address in SPI debug messagesWerner Zeh
For an unknown reason the printed address in the SPI debug messages is modified before it is printed by subtracting the constant 0xf020 from the passed in address. What I suppose this debug code should do is to print the used register address within the SPI controller while any parts of this address that belongs to the SPI base address should be omitted. To fix that remove the subtraction of 0xf020 and adjust the address mask to 0x3ff so that only the offset to the registers inside the SPI controller will be visible in the debug messages. In addition switch to uint8_t and friends over u8 to sync up with used types in this file. Change-Id: I93ba7119873115c7abc80a214cc30363a6930b3b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16500 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-07commonlib: move DIV_ROUND macros from nvidia/tegraArthur Heymans
DIV_ROUND_CLOSEST and DIV_ROUND_UP are useful macros for other architectures. This patch moves them from soc/nvidia/tegra/types.h to commonlib/include/commonlib/helpers.h . Change-Id: I54521d9b197934cef8e352f9a5c4823015d85f01 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16415 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-07soc/apollolake: Enable/disable Audio clk and power gate in devicetree.cbVenkateswarlu Vinjamuri
BUG=chrome-os-partner:56034 Change-Id: Id88d262b32dea468536575117fc34d52076a3096 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/16423 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06fsp_baytrail: Refactor code for SPI debug messagesWerner Zeh
Use the config switch CONFIG_DEBUG_SPI_FLASH on compiler level rather then on preprocessor level to ensure that the code is compiled even if the switch is not selected. In addition the following two changes are introduced: 1. Prepend the debug messages with 'SPI:' to make the output more meaningful. 2. Change the address mask from 0xffff to 0x3ff and remove the subtraction of the constant value 0xf020 in order to print only the register offset within the SPI controller and avoid the visibility of any fragments from SPI base address. 3. Switch to uint8_t and friends instead of u8 to sync up with other code in the same file. Change-Id: Iaf46f29a775039007a402fe862839df06a4cbfaa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16499 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06google/reef: Enable 20K pull ups for LPC CLKRUN and LAD0:3 linesShamile Khan
The pull up for CLKRUN is required to resolve keyboard slowness and malfunctioning observed on some reef systems. The CLKRUN signal was probed and found to be floating when the pull up was not enabled. Also Added pull ups for the LPC Multiplexed command, address and data lines LAD0:3 because the LPC Interface specification requires them. BUG=chrome-os-partner:55586 BRANCH=none TEST=When a key is pressed, the character is immediately visible on the screen. Also the interrupt count for i8042 increments immediately in /proc/interrupts. Change-Id: I16df1a0301a3994c926a609f61291761219f9e01 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/16426 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-04Makefile.inc: Use $(MAINBOARDDIR)Iru Cai
Commit 93ef3ff makes the following only print the part number when the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so use it instead of $(MAINBOARD_DIR). build_complete:: coreboot printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \ $(CONFIG_MAINBOARD_PART_NUMBER) Change-Id: I729a583182937db7a926eb75aa28dfb53360046c Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/16410 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-04lpss_i2c: Increase default timeout to 4msDuncan Laurie
Increase the default timeout in the LPSS I2C driver to 4ms from 2ms. During testing with some slower devices I found that the existing timeout could be too short leading to transaction failures. Change-Id: Ied86c7a0aa26d55b31f447c5938803c194d0045e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16392 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-02apollolake: relocate fsp header files to vendorcodeBrandon Breitenstein
FSP header files should be located in vendorcode, not soc directory. This patch includes changes any references to the old location to the new location. Change-Id: I44270392617418ec1b9dec15ee187863f2503341 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16310 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02drivers/intel/fsp2_0: Make FSP Headers Consumable out of BoxBrandon Breitenstein
The following patch is based off of the UEFI 2.6 patch. The FSP header files are temporarily staying in soc/intel/apollolake and FspUpd.h has been relocated since the other headers expect it to be in the root of an includable directory. Any struct defines were removed since they are defined in the headers and no longer need to be explicity declared as struct with the UEFI 2.6 includes. BUG=chrome-os-partner:54100 BRANCH=none TEST=confirmed coreboot builds successfully Change-Id: I10739dca1b6da3f15bd850adf06238f7c51508f7 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com># Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/16308 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-09-01soc/intel/apollolake: Use consistent convention for community namesFurquan Shaikh
Instead of using a mix of _N and _NORTH, _NW and _NORTHWEST for GPIO community names, follow one single convention. This allows for re-using macros easily. Change-Id: Icd9cf9ef70d03576d864688cf5d6946124c259c3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16353 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31rockchip/rk3399: Add pwm_regulator.c for pwm then ramp boot up cpuEric Gao
Before, we calculate the pwm duties for cpu cores and centerlogic by hand, adding pwm_regulator.c to handle this. The default pwm design min/max voltage may be different between revs. With the pwm regulator, this patch changes the little cpu frequency from 600M to 1512M, and raises CPU voltage to 1.2V correspondingly. This also means we decide to drop the ES1 because it may fail to bootup with 1.5G ~ 1.2v. BRANCH=none BUG=chrome-os-partner:54376,chrome-os-partner:54862 TEST=Bootup on kevin board Change-Id: Id04c176bddfb9cdf3d25b65736e40249a85f6aa1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ee4365c787ec523b7ee1028ea100dcfbb331b3a9 Original-Change-Id: Ide75bbd92d1cbb14f934baeec0e38862bc08402b Original-Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364410 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16368 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31soc/broadcom/cygnus/ddr_init.c: Correct typo in POWER ON and POWER OK.Elyes HAOUAS
Change-Id: I5b69a8429eb2f7add08bc134d5d2366a1afe6a4f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16343 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-31src/soc: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: Ifc47f103492a2cd6c818dfd64be971d34afbe0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16324 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31skylake: Add initial FSP2.0 supportRizwan Qureshi
Add Initial pieces of code to support fsp2.0 in skylake keeping the fsp1.1 flow intact. The soc/romstage.h and soc/ramstage.h have a reference to fsp driver includes, so split these header files for each version of FSP driver. Add the below files, car_stage.S: Add romstage entry point (car_stage_entry). This calls into romstage_fsp20.c and aslo handles the car teardown. romstage_fsp20.c: Call fsp_memory_init() and also has the callback for filling memory init parameters. Also add monotonic_timer.c to verstage. With this patchset and relevant change in kunimitsu mainboard, we are able to boot to romstage. TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1 Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0 Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-31rockchip/rk3399: Move romstage.c to mainboard/gruShunqian Zheng
The romstage.c is more board related than soc specific, like setting the pwm regulators, so moving it to mainboard/gru. BRANCH=none BUG=chrome-os-partner:54819 TEST=Bootup on kevin board Change-Id: I83c6cde9f451480e47e2b4b549cedf65b345134c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 35feeb07131a6a9de4adde035236987391833474 Original-Change-Id: If2bf245302eb4fb20bb089c1b3ffa03909722443 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/375398 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16367 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31soc/intel/apollolake: Disable Periodic Retraining per-SKUAndrey Petrov
Certain LPDDR4 models have some HW issues that can be worked around by turning off Periodic Retraining feature in the memory controller. Add option to disable PR per SKU. BUG=chrome-os-partner:55466 TEST=run RMT test, pass Change-Id: Ie7aa79586665f6d3a7edd854a9eef07e6a1b2ab8 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/16320 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-31soc/intel/apollolake: Update FSP UPD header files for SIC 1.1.3Brandon Breitenstein
Update FSP Header files to provide UPD for periodic training disable. This is for the SIC 1.1.3/150_11 FSP release. BUG=chrome-os-partner:54100 BRANCH=none TEST=built coreboot image with new headers for reef Change-Id: I2ba11aa3d2d664c1d34e39c4c8144fb1c4f2149a Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16352 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-31soc/intel/apollolake: Gather microcode revisionJohn Zhao
Expose get_microcode_info in cpu initialization. Microcode revision is retrieved and stored into log file at verstage. BUG=chrome-os-partner:56544 BRANCH=None TEST=Built coreboot image and validate log file Change-Id: I1e792e70f1318df64b4b85a319700013f3757952 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16311 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-30fsp_broadwell_de: Refactor code for SPI debug messagesWerner Zeh
Currently boards based on fsp_broadwell_de fail to compile if the config switch CONFIG_DEBUG_SPI_FLASH is selected. The error is caused by the usage of const for the address pointer in the functions writeb_, writew_ and writel_. The reason why it stayed hidden for so long is the fact that the switch is used with the preprocessor and nobody really selects it until there is a bug one want to find in this area. This patch fixes the parameter type definition which solves the error. In addition the config switch is not used on preprocessor level anymore but instead on compiler level. This ensures that at least the code syntax is checked on build time even if the config option is not selected. Also prefix the messages with "SPI:" to make them more meaningful in a full log. Change-Id: I3514b0d4c08bf5a4740f2632641e09af1b3aaf3a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16347 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-30soc/intel/skylake: Include Kabylake specific IGD Device IDsBarnali Sarkar
Add Kabylake specific Graphics IDs in report_platform.c and igd.c. BUG=none BRANCH=none TEST=Built and boot kunimitsu Change-Id: I3b810d0ff51eb51d396b783e282779aefb2dcb8c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-30soc/intel/apollolake: add option for SLP_S3_L assertion widthAaron Durbin
In order to provide time for the S0 rails to discharge one needs to be able to set the SLP_S3_L assertion width. The hardware default is 60 microcseconds which is not slow enough on most boards. Therefore provide a devicetree option for the mainboard to set accordingly for its needs. An unset value in devicetree results in a conservative 2 second SLP_S3_L duration. BUG=chrome-os-partner:56581 Change-Id: I6c6df2f7a181746708ab7897249ae82109c55f50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16326 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-08-28soc/intel/apollolake: Add CQOS CAR implementationAndrey Petrov
Add new option to set up Cache-As-RAM by using CQOS, Cache Quality of Service. CQOS allows setting ways of cache in no-fill mode, while keeping other ways in regular evicting mode. This effectively allows using CAR and cache simultaneously. BUG=chrome-os-partner:51959 TEST=switch from NEM to CQOS and back, boot Change-Id: Ic7f9899918f94a5788b02a4fbd2f5d5ba9aaf91d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15455 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28soc/intel/apollolake: Update stage link addresses for 768 KiB cacheAndrey Petrov
Update link addresses for romstage and verstage. Also update FSP-M relocation address. BUG=chrome-os-partner:51959 Change-Id: Ia51a341f05b33151ea5fda9f8620408b5a15bc19 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15454 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28soc/intel/apollolake: Handle CAR sizes other than 1 MiBAndrey Petrov
Since whole L2 (1MiB) is not used, it is possible to shrink CAR size to 768 KiB. Since 768 KiB is not power of two, 2 MTRRs are used to set it up. This is a part of CQOS enabling. BUG=chrome-os-partner:51959 Change-Id: I56326a1790df202a0e428e092dd90286c58763c5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15453 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28src/soc: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I89bc8b26f2dba4770aea14b8bbc7e657355e8c59 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16325 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-27rockchip/rk3399: Enable ramstage compression, shuffle around memlayoutJulius Werner
Since we now have so much more room for activities in our romstage SRAM section, we can easily fit the LZMA decompressor to enable ramstage compression. Also shuffle around memlayout sections a little more to make use of unused space, and balance out leftover memory so that all sections that might need future expansion have a reasonable amount. Change-Id: I47f2d03e520fc3103ef04257b4ba7e93874b8956 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16334 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27gru: Make SDRAM parameters individual struct files in CBFSJulius Werner
This patch changes Gru SDRAM parameters from structures that just get compiled into the romstage to individual CBFS files. This allows us to only load the parameter set we need for the board we're booting from flash, which reduces our boot time and the SRAM memory footprint required to hold the romstage. TEST=Booted Kevin. Change-Id: Ie88a515cbdb19a794ca0a230a56bcc82bed1e550 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16274 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-25soc/intel/apollolake: Enable ELOGBrandon Breitenstein
Add in the base for ELOG for APL. Some PM events still need to be added but the basic events are logged here. This enables the basic functionality of ELOG for Apollolake. BUG=chrome-os-partner:55473 BRANCH=none TEST=Verified image boots on Amenia Change-Id: I8682293e5a55b3efb5fdd9f1be1f3e4bf8d0757c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/15937 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-25intel/common: Clear wake status bits before sleepShaunak Saha
Call power management utility function clear_wake_sts from southbridge_smi_sleep before going to sleep. This is needed to clear the wake status bits in ACPI registers GPE0. BUG=chrome-os-partner:55583 BRANCH=None TEST=Verified that system goes to sleep on lidclose and powerd_dbus_suspend command issued from built-in keyboard. Change-Id: I204a59f8a19137d6a192ea2d89939eefcd5d41ce Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16299 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-25intel/apollolake: Add power management utility functionShaunak Saha
This patch adds a power management utility function to clear wake status bits in ACPI GPE0 registers. We need to call this function before going to sleep from common smi handler function. BUG=chrome-os-partner:55583 BRANCH=None TEST=Verified that system goes to sleep on lidclose and powerd_dbus_suspend command issued from built-in keyboard. Change-Id: Icd095d377c82f2e154f2e2db773f737aa49cda64 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16298 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-24soc/intel/skylake: Bump up bootblock size to 48KFurquan Shaikh
When UART_DEBUG is enabled bootblock size grows more than the current 32K. Bump this up to 48K. Change-Id: I580137dfdc9b4ad226c866f2b23b159bd820c62c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16317 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-24soc/intel/skylake: align chromium Chrome OS configAaron Durbin
The chromium tree is currently using a different config for Chrome OS than what is being built in coreboot.org. Align those settings to reflect how skylake Chrome OS boards are actually shipped to provide proper parity between coreboot.org and chromium. Change-Id: I7ab9c1dfa8c6be03ac2125fb06cb7022f3befa97 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16313 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-24soc/intel/apollolake: Add ASL methods for eMMCVaibhav Shankar
Implement PS0 and PS3 methods to support eMMC power gate in S0ix suspend and resume. BUG=chrome-os-partner:53876 TEST=Suspend and Resume using 'echo freeze > /sys/power/state'. System should resume from S0ix. Change-Id: Ia974e9ed67ee520d16f6d6a60294bc62a120fd76 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16233 Tested-by: build bot (Jenkins) Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-23soc/intel/apollolake: Use CONFIG_NHLT_DMIC_2CH_16B for dmicSaurabh Satija
Update the config variable that gets set to use DMIC 2 channel blob for intel/apollolake platforms. This flag is set in mainboard. Change-Id: Ic6deb9f08d345cc45351d61a7597bc7075ee20f9 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/16251 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-20intel/skylake: Do not halt in poweroff if in SMMFurquan Shaikh
Calling halt in poweroff when in SMM prevents SLP_SMI to be triggered preventing the system from entering sleep state. Fix this by calling halt only if ENV_SMM is not true. BUG=chrome-os-partner:56395 Change-Id: I3addc1ea065346fbc5dbec9d1ad49bbd0ae05696 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16259 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-20intel/apollolake: Do not halt in poweroff if in SMMFurquan Shaikh
Calling halt in poweroff when in SMM prevents SLP_SMI to be triggered preventing the system from entering sleep state. Fix this by calling halt only if ENV_SMM is not true. BUG=chrome-os-partner:56395 BRANCH=None TEST=Verified lidclose behavior on reef. Change-Id: If116c8f4e867543abdc2ff235457c167b5073767 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16257 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-20intel/apollolake: Fix typo in gpi_status_getFurquan Shaikh
sts_index is calculated incorrectly because of wrong use of parenthesis. This lead to wrong bit being checked for EC_SMI_GPI on reef and lidclose event was missed. BUG=chrome-os-partner:56395 BRANCH=None TEST=Verified that lidclose event is seen and handled by SMM in coreboot on reef. Change-Id: I56be4aaf30e2d6712fc597b941206ca59ffaa915 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16256 Tested-by: build bot (Jenkins) Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-20soc/intel/apollolake: Save DIMM info from SMBIOS memory HOBRavi Sarawadi
Read FSP produced memory HOB and use it to populate DIMM info. DIMM 'part_num' info is stored statically based on memory/SKU id. BUG=chrome-os-partner:55505 TEST='dmidecode -t 17' and 'mosys -k memory spd print all' Change-Id: Ifcbb3329fd4414bba90eb584e065b1cb7f120e73 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/16246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-19rockchip/rk3399 & gru/kevin: support sdram 933MHz on kevinLin Huang
We should be running faster. Faster = better. BRANCH=None BUG=chrome-os-partner:54873 TEST=Boot; stressapptest -M 1028 -s 10000 Change-Id: I7f855960af3142efb71cf9c15edd1da66084e9d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 51bfd2abb1aba839bd0b5b85e9e918f3cc4fd94d Original-Change-Id: Iec9343763c1a5a5344959b6e8c4dee8079cf8a20 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/362822 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16241 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19soc/intel/skylake: use SPI flash boot_device_rw() for ealy stagesAaron Durbin
If the boot device is SPI flash use the common one in the early stages. While tweaking the config don't auto select SPI_FLASH as that is handled automatically by the rest of the build system. BUG=chrome-os-partner:56151 Change-Id: Ifd51a80fd008c336233d6e460c354190fcc0ef22 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16202 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19soc/intel/apollolake: use SPI flash boot_device_rw() for ealy stagesAaron Durbin
If the boot device is SPI flash use the common one in the early stages. While tweaking the config don't auto select SPI_FLASH as that is handled automatically by the rest of the build system. BUG=chrome-os-partner:56151 Change-Id: If5e3d06008d5529dd6d7c05d374a81ba172d58fd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16201 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19soc/intel/skylake: make SPI support early stagesAaron Durbin
Using malloc() in SPI code is unnecessary as there's only one SPI device that the SoC support code handles: boot device. Therefore, use CAR to for the storage to work around the current limiations of the SPI API which expects one to return pointers to objects that are writable. Additionally, include the SPI support code as well as its dependencies in all the stages. BUG=chrome-os-partner:56151 Change-Id: I0192ab59f3555deaf6a6878cc31c059c5c2b7d3f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16196 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2016-08-19soc/intel/apollolake: make SPI support early stagesAaron Durbin
Using malloc() in SPI code is unnecessary as there's only one SPI device that the SoC support code handles: boot device. Therefore, use CAR to for the storage to work around the current limiations of the SPI API which expects one to return pointers to objects that are writable. BUG=chrome-os-partner:56151 Change-Id: If4f5484e27d68b2dd1b17a281cf0b760086850a7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16195 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19Kconfig: introduce writable boot device notionAaron Durbin
Indicate to the build system that a platform provides support for a writable boot device. The following will provide the necessary support: COMMON_CBFS_SPI_WRAPPER users soc/intel/apollolake soc/intel/baytrail soc/intel/braswell soc/intel/broadwell soc/intel/skylake The SPI_FLASH option is auto-selected if the platform provides write supoprt for the boot device and SPI flash is the boot device. Other platforms may provide similar support, but they do that in a device specific manner such as selecting SPI_FLASH explicitly. This provides clearance against build failures where chipsets don't provide SPI API implementations even though the platform may use a SPI flash to boot. BUG=chrome-os-partner:56151 Change-Id: If78160f231c8312a313f9b9753607d044345d274 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19Kconfig: separate memory mapped boot device from SPIAaron Durbin
Make the indication of the boot device being memory mapped separate from SPI. However, retain the same defaults that previously existed. BUG=chrome-os-partner:56151 Change-Id: I06f138078c47a1e4b4b3edbdbf662f171e11c9d4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16228 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19intel/apollolake: Skip ITSS configuration in SMMFurquan Shaikh
In SMM, gpio configuration could be done to avoid leakage. ITSS configuration is not required when entering sleep. Thus, bail out early from itss configuration if in SMM. BUG=chrome-os-partner:56281 Change-Id: I4d8be0513aa202f001f980bb91986b50b8ed2a5b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16242 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-18Kconfig: rename BOOT_MEDIA_SPI_BUS to BOOT_DEVICE_SPI_FLASH_BUSAaron Durbin
Provide a default value of 0 in drivers/spi as there weren't default values aside from specific mainboards and arch/x86. Remove any default 0 values while noting to keep the option's default to 0. BUG=chrome-os-partner:56151 Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16192 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-18soc/intel/skylake: Correct Cache as ram sizeRizwan Qureshi
DCACHE_RAM_SIZE_TOTAL is set to 0x40000 and is being used to set up CAR. Whereas DCACHE_RAM_SIZE which is set to 0x10000 is used to calculate the _car_region_end in car.ld. If the FSP CAR requirement is greater than or even close to DCACHE_RAM_SIZE then, the CAR region for FSP will be determined to be below the overall CAR region boundary i.e, out of CAR memory range. This is working with FSP 1.1 because we provide the FspCarSize and FspCarBase explicitly in a UPD. Hence, FSP is still able to use the upper region of CAR memory for its purpose. However, it will be a problem in case of FSP2.0 where FSP usable CAR is calculated using _car_region_end. So, Remove the the use of DCACHE_RAM_SIZE_TOTAL and set DCACHE_RAM_SIZE to correct value i.e, 0x40000(256KB) Change-Id: Ie2cb8bb0705a37edb3414850d7659f8a3dd6958b Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16236 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-18soc/intel/skylake: Move bootblock specific code from skylake/romstageNaresh G Solanki
There is a lot of code that is being referred to in bootblock but resides under skylake/romstage folder. Hence move this code into skylake/bootblock, and update the relevant header files and Makefiles. TEST=Build and Boot kunimitsu. Change-Id: If94e16fe54ccb7ced9c6b480a661609bdd2dfa41 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16225 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-18skylake: Do FspTempRamInit only for FSP1.1 & tidy up PCH early initRizwan Qureshi
Prepare Skylake for FSP2.0 support. We do not use FSP-T in FSP2.0 driver, hence guard the FspTempRamInit call under a switch. In addition to the current early PCH configuration program few more register, so all in all we do the following, * Program and enable ACPI Base. * Program and enable PWRM Base. * Program TCO Base. * Program Interrupt configuration registers. * Program LPC IO decode range. * Program SMBUS Base address and enable it. * Enable upper 128 bytes of CMOS. And split the above programming into into smaller functions. Also, as part of bootblock_pch_early_init we enable decoding for HPET range. This is needed for FspMemoryInit to store and retrieve a global data pointer. And also move P2SB related definitions to a new header file. TEST=Build and boot Kunimitsu Change-Id: Ia201e03b745836ebb43b8d7cfc77550105c71d16 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16113 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-18intel/apollolake: Fix check for return value of pmc_gpe_route_to_gpioFurquan Shaikh
pmc_gpe_route_to_gpio returns -1 on error. However, the value was being stored in unsigned int and compared against -1. Fix this by using local variable ret. Change-Id: I5ec824949d4ee0fbdbb2ffdc9fc9d4762455b27b Reported-by: Coverity ID 1357443, 1357442, 1357441 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16218 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-17google/gru: Add new PWM regulator duty numbers for revision 6Julius Werner
We're changing the PWM regulator bounds on Kevin from rev6 onwards, so we'll need to use different duty cycle values for them. We really want a proper PWM regulator driver that can calculate these values automatically from voltages, but until we have that this patch just hardcodes the new numbers in. (Yes, this is a patch for the mainboard/google/gru board family that only touches a file from the rockchip/rk3399 SoC. That too is something that'll be fixed up in a later CL.) BRANCH=None BUG=chrome-os-partner:54888 TEST=Booted Kevin rev4 (for whatever that's worth...). Change-Id: Ibb6ab5c6517d83ffb5e32cb17d0de33e8ec10293 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4cb2a939295e2b6443c5dbd3374982224322304b Original-Change-Id: I8757cc54f2478d20bb948a1a0a7398b0404a7b1f Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/368410 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16235 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-17soc/intel/skylake: restore MCHBAR and DMIBAR programmingRizwan Qureshi
Program MCHBAR, DMIBAR, EPBAR, EDRAMBAR and GDXCBAR. Also program the PAM registers. The system agent was being programmed in romstage during pre-console initialization, after moving to C_ENVIRONMENT bootblock this was missing, restoring the same. TEST=Build and Boot Kunimitsu Change-Id: Iaf310cfb83e58eb8d5affb481dfc343f5d45961b Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16224 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-16Revert "rockchip: rk3399: enable sdhci clk for emmc"Shunqian Zheng
This reverts commit 462e1413 ("rockchip: rk3399: enable sdhci clk for emmc") Enabling this clock in coreboot is no longer needed as it's handled in the kernel driver now. BUG=chrome-os-partner:52873 TEST=boot from usb/sdcard and check there is /dev/mmcblk0 BRANCH=none Change-Id: I92cf51f175fe56a09ab9329b29a27c77ef4328e1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 5707d1269a253dabf825be120d1f9348ffaab6d0 Original-Change-Id: I8bca870c663d8ce8fac5daaaaf8225489f22ed13 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/367421 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16152 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-15Revert "Kconfig: separate memory mapped boot device from SPI"Aaron Durbin
This reverts commit a83bbf58541cf41ea7a97dedbc8c02dffa59e86d. This was submitted out of order. Change-Id: Ic5a28faf94c1f1901a72e46343722eb4224c5086 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16226 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-15soc/intel/skylake: don't include all SPI flash driversAaron Durbin
The SPI host controller for the SPI boot device doesn't allow normal probing because it uses the hardware sequencer all the time. Therefore, it's pointless to include unnecessary SPI flash drivers. BUG=chrome-os-partner:56151 Change-Id: Ifcc6492b4bccf7d01b121d908976c9087d12deb0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16189 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-15soc/intel/apollolake: don't include all SPI flash driversAaron Durbin
The SPI host controller for the SPI boot device doesn't allow normal probing because it uses the hardware sequencer all the time. Therefore, it's pointless to include unnecessary SPI flash drivers. BUG=chrome-os-partner:56151 Change-Id: I04551fdb0b207c7ec2f1f171cff62ed7334a5ad5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16188 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-15Kconfig: separate memory mapped boot device from SPIAaron Durbin
Make the indication of the boot device being memory mapped separate from SPI. However, retain the same defaults that previously existed. BUG=chrome-os-partner:56151 Change-Id: Ibdd7c8754f9bf560a878136b1f55238e2c2549d3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16193 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-15intel/quark: Fix assert checkFurquan Shaikh
Having an assignment in assert does not make sense. This seems like it was intended to check if chip is always same as segments->chip. Change-Id: I297d9e76a0404a1f510d43f8b9c39e96b557689f Reported-by: Coverity ID 1357439 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16219 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2016-08-15soc/ucb/riscv: select BOOTBLOCK_CONSOLEJonathan Neuschäfer
Change-Id: I847d7686dec04e9fae7db13d53adc8ca32c56f3a Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16158 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-14soc/intel/skylake: Change name pmc_tco_regs to smbus_tco_regsBarnali Sarkar
The function name "pmc_tco_regs" is changed to "smbus_tco_regs" since TCO offsets belongs to SMBUS PCI device. BUG=none BRANCH=none TEST=Built and booted kunimitsu Change-Id: I4ac26df81a8221329f2b45053dd5243cd02f8ad7 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16155 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-13chromeos: Make CHROMEOS_RAMOOPS_NON_ACPI a default for non-ACPI boardsJulius Werner
This patch enables the CHROMEOS_RAMOOPS_NON_APCI Kconfig option as a default across all non-x86 Chrome OS boards. CQ-DEPEND=CL:367905 BRANCH=None BUG=None TEST=See depthcharge CL. Change-Id: If14ef4f9b1bd480f2d52df3892c73059bb9b07d5 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8c3b74fb21aadd6de7af62f32fa98fc211d75085 Original-Change-Id: I16ff7f68762a995cd38e5fddaf6971d4b9f07e21 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/368010 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16154 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-11soc/apollolake: enable access to RTC NVRAMRavi Sarawadi
FSP unconditionally locks parts of the NVRAM in the RTC. This change will enable coreboot to update the locking policy and be able to unlock the region BUG=chrome-os-partner:55944 TEST=Check 'crossystem dev_boot_usb=1' Change-Id: I70fd2bafa6ff9eb9cdf284b9780e4b90dee0f4ce Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/16144 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
2016-08-11soc/qualcomm/ipq40xx: Reduce the delay in I2C.Kan Yan
3ms delay was found in testing to be sufficient for qup_i2c_write_fifo_flush(), but 1 additional ms was added to give additional headroom. Change the Delay from 10ms to 4ms. BUG=b:28942403 TEST=Boot up Gale board and the TPM functions normally. BRANCH=None Change-Id: I6821e2a101cc44e11d74eb6a6215aa9b848ae8c6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d93520fab15c5695ea18db21d0f3b24a108f204d Original-Change-Id: I202f5b8a1ef62bb039c56ba5a25b48b205cf4a67 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/357961 Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: SARAVANAKUMAR SUDALAI <ssudalai@qti.qualcomm.com> Reviewed-on: https://review.coreboot.org/16126 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-11rockchip/rk3399: Add code to neuter Type-C PHY for firmware USBJulius Werner
The Rockchip RK3399 integrates a USB Type-C PHY in charge of things like SuperSpeed line muxing for rotated cable orientations in the SoC. While fancy, this is very complicated and we don't want to implement support for the whole thing in firmware. The USB Type-C standard has intentionally been designed in a way that the USB 2.0 (HighSpeed) lines always "just work" in any orientation (by just shorting different pins in the connector together) so that simple use cases like ours can get basic USB functionality without much hassle. However, a semi-configured Type-C PHY can confuse USB 3.0 capable devices into thinking we're actually supporting SuperSpeed, and fail at that rather than establishing a reliable HighSpeed connection. This patch sets enough bits in the Type-C PHY to electrically isolate the SuperSpeed lines from the connector so that the connected device isn't going to get any fancy ideas and reliably falls back to USB 2.0. Also clean up the rest of the USB code while we're at it: avoid writing a few bits that are already in the right state from their reset values anyway, or reading values whose content we already know for this SoC. Rename the USB controllers to the name actually used in the Rockchip documentation (USB OTGx) rather than the name blindly copied from Exynos code (USB DRDx). BRANCH=None BUG=chrome-os-partner:54621 TEST=Plug a USB 3.0 Patriot Memory stick into both ports in all orientations, observe how it gets reliably detected now (safe for some known hardware issues on my board). Change-Id: Ifce6bcddd69f2e8f2e2a2f48faf65551e084da1e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c526906f998bf66067d3addb8b3d3a126c188b1e Original-Change-Id: Ie80a201a58764c4d851fe4a5098a5acfc4bcebdf Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/366160 Original-Reviewed-by: liangfeng wu <wulf@rock-chips.com> Original-Reviewed-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-by: <515506667@qq.com> Reviewed-on: https://review.coreboot.org/16125 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-11soc/intel/common: Add support for serial console based ACPI debugSubrata Banik
This patch enables serial debug functionality for ASL code based on UART type(legacy/LPSS). From Skylake onwards all Intel platform uses LPSS based UART for serial console hence provide option to redirect ASL log over LPSS UART. Example: Name (OBJ, 0x12) APRT (OBJ) APRT ("CORE BOOT") Output: 0x12 CORE BOOT BUG=none BRANCH=none TEST=Built and boot kunimitsu to ensure to be able to get ASL console log. Change-Id: I18c65654b8eb1ac27af1f283d413376fd79d47db Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/16070 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11fsp_Broadwell_DE: Do not set IRQ3 and IRQ4 to levelKevin Paul Herbert
When booting Linux as a coreboot payload, serial access does not work properly. This is because the setup code erroneously sets IRQ3 and IRQ4 to level. The UART on Broadwell is 8250/16550 compatible, thus ISA and edge-triggered. This change is not necessary on the non-FSP version of Broadwell support. The non-FSP version does not set these IRQ overrides. Fix verified booting Linux 4.6.0-rc2 on Intel Camelback Mountain CRB, using Intel FSP 1.0. Change-Id: I17b466676e7f4891c3e75ce6208e1580c9eaf742 Signed-off-by: Kevin Paul Herbert <kevin@trippers.org> Reviewed-on: https://review.coreboot.org/16065 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-10rockchip/common: Set weekday to unknown in rtc_get()Martin Roth
Prior to this patch, time->wday was not being initialized in rtc_get(), but was still being used by rtc_display() to print a day. Set to -1 which gets printed as "unknown ". Fixes coverity issue 1357459 - Uninitialized scalar variable Change-Id: Idecb7968f854df997b58a342e1a06a879f299394 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15899 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-08-10soc/intel/quark: Switch to using serial routines for FSPLee Leahy
Switch from passing FSP the serial port address to passing FSP the serial port output routine. This enables coreboot to use any UART in the system and also log the FSP output. TEST=Build and run on Galileo Gen2 Change-Id: I67d820ea0360a3188480455dd2595be7f2debd5c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16105 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10Makefiles: Use $(MAINBOARD_DIR) instead of $(CONFIG_MAINBOARD_DIR)Martin Roth
The variable MAINBOARD_DIR already has the quotes stripped off. Change-Id: Ib434ce92bdbc49180fb3f713b26d65ba4cf8c441 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/16117 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-10soc/apollolake: add GPIO SMI supportShaunak Saha
GPIOs which trigger SMIs set the GPIO_SMI_STS status bits in SMI_STS register. This patch also sets the SMI_EN bit in enable register for each community based on GPIOROUTSMI bit in gpio pad. When SMI on a gpio happens status needs to be gathered on gpio number which is done by reading the GPI_SMI_STS and GPI_SMI_EN registers. BUG=chrome-os-partner:54977 TEST=When system is in firmware mode executing the command lidclose from ec console shuts down the system. Change-Id: Id89a526106d1989c2bd3416ab81913e6cf743d17 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15833 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-09soc/nvidia/tegra210: remove unused spi boot device supportAaron Durbin
All mainboards utilizing the t210 SoC use the CBFS spi wrapper for the boot device support. Therefore, remove the unutilized spi boot device. BUG=chrome-os-partner:55932 Change-Id: Id49ca6e5bf353bba8c03e62f5a9a873ad1ce7081 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16109 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09soc/nvidia/tegra132: remove tegra132 supportAaron Durbin
As no more mainboards are utilizing this SoC support code remove it. It can be resurrected if ever needed. BUG=chrome-os-partner:55932 Change-Id: Ic3caf6e6c9b62d012679b996abaa525c8bf679a9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16108 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09rockchip/rk3399: sdram: correct read obs and set DQS driver registerLin Huang
We were using the wrong register when reading the obs value and setting the DQS driver. This did not affect LPDDR3 performance, but still needs to be fixed. BUG=none BRANCH=none TEST=boot from kevin Change-Id: I144f575e27fba11872a8c5463ab1e2986f385ede Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 98221e6b03fc09cbf62af29a270e7a8aa8dfb986 Original-Change-Id: Ie179f9a2955c5712951d40b3ada9c14a51c09c8d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/363170 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16052 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09soc/qualcomm/ipq40xx: Use block mode for I2CVaradarajan Narayanan
In FIFO mode, the I2C driver was not able to fetch more than 32 bytes of data from the TPM device. Switch to block mode to be able to read more data. BUG=chrome-os-partner:51096 TEST=TPM commands succeed BRANCH=None Change-Id: Ib52a1b03667f61a08ce048d38407a5b60abf660d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: fbcd40dc67d796d3e31675bd35321282667fe9fa Original-Change-Id: I765b76f9d7743f6d387470de594fb6eee99e08ca Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357960 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16051 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08soc/intel/common: fix gsmi handlerAaron Durbin
The gsmi_exec() expects the parameter to be a pointer to the 32-bit register storage of the SMI save state. The previous code was passing a pointer with the value obtained from the saved-state -- not a pointer to the storage of the register value. This bug causes gsmi to not log events because it's interrogating the parameter buffer itself as if it were a pointer. BUG=chrome-os-partner:55932 Change-Id: I37981424f1414edad1456b31cad1b99020d57db6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16087 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08chromeos chipsets: select RTC usageAaron Durbin
Since RTC is now a Kconfig ensure RTC is selected on the x86 chipsets which are in Chrome OS devices. This allows the eventlog to have proper timestamps instead of all zeros. BUG=chrome-os-partner:55993 Change-Id: I24ae7d9b3bf43a5791d4dc04aae018ce17fda72b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16086 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08soc/intel/skylake: Clean up SoC ASL code.Barnali Sarkar
List of changes done here in this patch 1. Remove CARD definition from EMMC and SD Card Controller in scs.asl since _RMV method does not get evaluated while setting up removable attribute in sysfs in kernel. "cat /sys/block/mmcblk1/removable" this command always returns 0. This CARD Device includes _ADR which follows SDIO Bus format. But, SD/EMMC sits on PCI Bus. Hence this CARD Device specific _ADR code is also not needed. 2. Remove Base Address for ACPI debug output memory buffer in systemagent.asl as it is not getting used throughout the code. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: I29effaffdafcc21e26445ec3c54aedecdbc50274 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16068 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-08-08skylake/devicetree: Add PIRQ Routing programmingBarnali Sarkar
Program PIRQ Routing with correct values, as done by FSP, and also in 'soc/intel/skylake/romstage/pch.c' file. If not done, these values get overridden by "0" during PxRC -> PIRQ programming in ramstage, in 'soc/intel/skylake/lpc.c' file pch_pirq_init()function. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: Ibeb9a64824a71c253e45d6a1c6088abd737cf046 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-08-08soc/intel/skylake: Cleanup patch for Skylake SoCBarnali Sarkar
Here is the list of items of code cleanup 1. Define TCO registers in smbus.h and not in pmc.h (as per EDS). 2. Include smbus.h wherever these TCO register defines were used. 3. Remove duplication of define in gpio_defs.h. 4. Remove unnecessary console.h include from memmap.h as no prints done. 5. Remove unnecessary comment from pch.c. BUG=none BRANCH=none TEST=Built and boot kunimitsu. Change-Id: Ibe6d2537ddde3c1c7f8ea5ada1bfaa9be79c0e3b Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16027 Tested-by: build bot (Jenkins) Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-08-06soc/intel/skylake: Add Kabylake device IdsRizwan Qureshi
Adding kabylake device ids for chip inits. Skylake and Kabylak do not differ much, the intention is to support both SoCs in the same code base. Change-Id: I9ff4c6ca08fe681798001ce81cca2c085ce32325 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16049 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-05soc/intel/quark: Add missing breaksLee Leahy
Add missing breaks in reg_access.c. TEST=Build and run on Galileo Gen2 Found-by: Converity Scan #1361261 Change-Id: I8be57f0758e5918a605e20ab9002747e0cc958e0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16069 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-08-05soc/intel/quark: Add bootblock_c_entryLee Leahy
Add the bootblock_c_entry routine to make it more explicit where the code transitions from assembler to C. TEST=Build and run on Galileo Gen2 Change-Id: Ib5f580c30b58d3c82fedddf63c368e617d401515 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16064 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Clean up debug output levelsLee Leahy
Change the debug output levels for quark: * Remove excess debug output * Change BIOS_DEBUG to BIOS_SPEW - exception in report_platform.c TEST=Build and run on Galileo Gen2 Change-Id: I37d7ed21a7fc4c92efeb5b71dd01922d7d4b9192 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16006 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-05soc/intel/quark: Disable FSP serial outputLee Leahy
Disable FSP output when CONFIG_DEFAULT_CONSOLE_LOGLEVEL is not set to 8 (BIOS_SPEW). Use the console log level to choose between the serial port address and NULL and pass it to FSP for the serial port address. TEST=Build and run on Galileo Gen2. Change-Id: I5498aad218524c211082d85d0ae9aacaf08a80f6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16005 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-05soc/intel/quark: Add FSP 2.0 romstage supportLee Leahy
Add the pieces necessary to successfully build and run romstage using the FSP 2.0 build. Because romstage is using postcar, add the postcar pieces so that romstage can attempt to load postcar. TEST=Build and run on Galileo Gen2 Change-Id: I66b3437e3c7840223535f6ab643599c9e4924968 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15866 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Add FSP 2.0 boot block supportLee Leahy
Add the pieces necessary to successfully build and run bootblock using the FSP 2.0 build. TEST=Build and run bootblock on Galileo Gen2 Change-Id: I2377f0b0147196f100396b8cd7eaca8f92d6932f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15865 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-04soc/apollolake: Return correct wake status in _SWSShaunak Saha
Wake status is calculated from the four pairs of gpe0 in cbmem CBMEM_ID_POWER_STATE which is filled very early in romstage and depends on the routing information in PMC GPE_CFG register. Coreboot sets the proper value of routing based on devicetree from pmc_init. But when system goes to S3 on waking up PMC is writing default values again in GPE_CFG which results in returning wrong wake status in _SWS. This patch corrects that behaviour by correcting the gpe0 pairs in cbmem after PMC sets the routing table in resume path. BUG=chrome-os-partner:54876 TEST=On resume through powerbtn, lidopen, keyboard press, etc. we are getting proper wake status. Change-Id: I5942d5c20d8c6aef73468dc611190bb7c49c7c7a Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16040 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
2016-08-04soc/intel/apollolake: Configure gpio ownershipJagadish Krishnamoorthy
For the gpio based irq to work, the ownership of the pad should be changed to GPIO_DRIVER. Provide an option in the gpio defs to configure the PAD onwership. BUG=chrome-os-partner:54371 TEST=none Change-Id: I26d242d25d2034049340adf526045308fcdebbc0 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/15871 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-04soc/intel/skylake: Correct address of I2C5 DeviceBarnali Sarkar
This corrects the address of the I2C5 Device. The I2C Controller #5 is on PCI Bus 0: Device 25: Function 1. The ACPI Address Encoding Logic is - High word = Device #. Low word = Function #. So, I2C5 (_ADR) = 0x0019 0001. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: I4719a843260ef58cc2307e909e9ccbffea519177 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16048 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-03google/gale: Add more board ID variantsKan Yan
EVT1 has two board IDs. Use binary first mode of base3 encoding for board ID. BUG=chrome-os-partner:55320 TEST=None. BRANCH=None Change-Id: I1cac1f74207f42616111d39db5c0494b7d1a0fb2 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 2b16cc74c4c147315b7db345678bbaf536ab4a7b Original-Change-Id: I6e95c7be4a6d28a0aae38b0838bd2ab71d288ba1 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364623 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org> Reviewed-on: https://review.coreboot.org/16030 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-08-03google/gru: Add code to support I2C TPM for KevinJulius Werner
Coming Kevin revisions will switch back to an I2C TPM. This patch adds the required configuration options and code to support that. Since the TPM type can currently only be changed at compile time, we can no longer support older Kevins with the same image. In order to build for Kevin revisions < 5, you have to explicitly override the CONFIG_GRU_HAS_TPM2. BRANCH=None BUG=chrome-os-partner:55523 TEST=Compiled both Kevin and Gru, confirmed that bootblock and verstage binary had the appropriate code differences. Change-Id: I1b2abe0f331eb103eb0a84f773ee7521d31ae5d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3245bff937154f0f9f39894de9c98a75631d59d9 Original-Change-Id: I81a15c9fb037a7ca2d69818e46cbb4f9a5ae1989 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/364222 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16029 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-08-03soc/intel/quark: Support access to CPU CR registersLee Leahy
Add support to access CR0 and CR4. TEST=Build and run on Galileo Gen2. Change-Id: I8084b7824ae9fbcd55e11a7b5eec142591a7e279 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16004 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03soc/intel/quark: Add header files for FSP 2.0Lee Leahy
Add the FSP 2.0 header files for Quark. These files were run through the drivers/intel/fsp2_0/header_util to convert the data types so that they are compatible with the coreboot build system. TEST=Build and run on Galileo Gen2. Change-Id: I15548888215cc811fa753d30b65e3a19e3f8ff8d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15863 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03soc/intel/quark: Prepare for FSP2.0 supportLee Leahy
Split the original contents of romstage.c into car.c, romstage.c and fsp1_1.c. TEST=Build and run on Galileo Gen2 Change-Id: I6392d7382e383ea2087afa6bf45b1f087ba78d79 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03soc/intel/quark: Initialize MTRRs in bootblockLee Leahy
Initialize the MTRRs for use by bootblock and romstage. Display the MTRRs. TEST=Build and run on Galileo Gen2. Change-Id: Ib1d422c738820163f54771c65034ae77301237ec Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15861 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03soc/intel/quark: Remove use of EDK-II macros and data typesLee Leahy
Include assert.h to use coreboot's ASSERT macro. Replace the use of UINT32 data type with uint32_t. Replace the use of UINT8 data type with uint8_t. TEST=Build and run on Galileo Gen2 Change-Id: I0bb7e43ea570f7b20355c5d05675ebf593942e83 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15858 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 06:23:16 +0000