summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2018-11-09mb/google/kahlee: Tune eDP panel initialization timeChris Wang
1. Add two parameters for panel initialization timing. > lvds_poseq_varybl_to_blon > lvds_poseq_blon_to_varybl 2. The BL_PWM is controlled by APU_EDP_BKLTEN_L/APU_DP_VARY_BL/ EDP_BKLTEN_L, so move APU_EDP_BKLTEN_L to early init stage, and be enabled depends on SKU, thus we can control the delay time by config APU_DP_VARY_BL. BUG=b:118011567 TEST=emerge-grunt coreboot. Change-Id: Ib20c48813b208d697b950b2f02a70a690e483fdb Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-11-09mb/intel/icelake_rvp: Move CNVi ASL entry from static DSDT to dynamic SSDT ↵Subrata Banik
generation This changes uses drivers/intel/wifi chip for CNVi device to ensure that: 1. Correct device name shows in ACPI name space 2. Correct wake up shows in cat /proc/acpi/wakeup 3. Remove cnvi.asl from soc/intel/icelake Change-Id: I21d3818ac9e384b0dbaa330d231022bdb8b8a547 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2018-11-08soc/intel/common: Add option to disable eSPI SMI at runtimeDuncan Laurie
Add an option that will disable eSPI SMI when ACPI mode is enabled, and re-enable eSPI SMI when ACPI mode is disabled. Additionally it ensures eSPI SMI is disabled on the ACPI OS resume path. This allows a mainboard to ensure that the Embedded Controller will not be able to assert SMI at runtime when booted into an ACPI aware operating system. This was tested on a Sarien board with the Wilco EC to ensure that the eSPI SMI enable bit is clear when booted into the OS, and remains clear after resume. Change-Id: Ic305c3498dfa4b8166cfdb070fc404dd4618ba3c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-08mediatek/mt8183: Add DDR driver of write leveling partHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Change-Id: Ibde5f613c61c36f5c9b405326fd18a3fd16cca56 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/28840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-11-08mediatek/mt8183: Add DDR driver of cmd bus training partHuayang Duan
BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Change-Id: Icb281f1b23c637971497eb28ed428235adf42f2d Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/28839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-11-08mediatek/mt8183: Add DDR driver of pre-calibration partHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Change-Id: If462126df31468ef55ec52e2061b9f98d3015f61 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/28838 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-08soc/intel/skylake: Add PCH sku id's supported for KBLPraveen hodagatta pranesh
This patch also add new SKL PCH-H device id's in soc platform reporting and common lpc driver. BUG=None TEST=Booted kabylake RVP11 with HM175 SKL PCH-H and verified the device id in serial logs. Change-Id: I8c04bf8d9c27caad800427a5c29da869da1d445d Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-08soc/intel/apollolake: Improve cold boot and S3 resumeJohn Zhao
FSP 2.0.7.1 provides UPD interface to execute IPC command. Configure PmicPmcIpcCtrl for PMC to program PMIC PCH_PWROK delay from default 100ms to 10ms to improve cold boot and S3 resume performance. BUG=b:118676361 CQ-DEPEND=CL:*703187 TEST=Verified system_resume_firmware_ec time reduction. Change-Id: I05656c9083a855112120b7f1b0ec01c42f582409 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07soc/intel/common: Include Icelake device IDsAamir Bohra
Add Icelake specific CPU, System Agent, PCH, IGD device IDs. Change-Id: I2c398957ffbc9bb0e5b363740d99433075ca66a3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/29435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07soc/amd/stoneyridge: Fix 81+ characters linesRichard Spiegel
There some files that do have at least 1 line over the 80 characters limit. Find and fix them. BUG=b:117950052 TEST=Build grunt. Change-Id: I1083a7559919e05a3e3a2dac99f571c161bb4c27 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-07soc/intel/skylake: Add FSP CAR support for kabylakePraveen hodagatta pranesh
Kabylake RVP11 uses FSPT to support Intel security features like bootguard verify boot and measured boot. This patch add FSP CAR support for kabylake by programming tempraminit parameters in fspcar.c and also add FSP_T_XIP default if FSP_CAR is selected in order to relocate FSPT binary while adding it in CBFS so that it can be executed in place. BUG=None TEST=Build and Boot to UEFI payload on kabylake RVP11 board and verified for successful FSP CAR setup. Change-Id: Id180ff9191d734c581ba7bf3879eaa730a799b52 Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07mb/{intel/google}: Move CNVi ASL entry from static DSDT to dynamic SSDT ↵Subrata Banik
generation This changes uses drivers/intel/wifi chip for CNVi device to ensure that: 1. Correct device name shows in ACPI name space 2. Correct wake up shows in cat /proc/acpi/wakeup 3. Remove cnvi.asl from soc/intel/cannonlake Change-Id: Ic81de2dce6045ced913766790a40ed19119f5118 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07soc/intel/apollolake: Provide interface to update TCC offsetJohn Su
This change provides an interface for apollolake to set TCC before BIOS reset complete happens in romstage. With this change, we can add code to update Tcc in devicetree. BUG=b:117789732 TEST=Match the result from TAT UI Change-Id: I4419d3bbe2628fcb26ef81828d6325fc952dbabc Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-07timer: Add wait_us/wait_ms helper macros to wait for conditionsJulius Werner
A very common pattern in drivers is that we need to wait for a condition to become true (e.g. for a lock bit in a PLL status register to become set), but we still want to have a maximum timeout before we treat it as an error. coreboot uses the stopwatch API for this, but it's still a little verbose for the most simple cases. This patch introduces two new helper macros that wrap this common application of the stopwatch API in a single line: wait_ms(XXX, YYY) waits for up to XXX milliseconds to see if the C condition 'if (YYY)' becomes true. The return value is 0 on failure (i.e. timeout expires without the condition becoming true) and the amount of elapsed time on success, so it can be used both in a boolean context and to log the amount of time waited. Replace the custom version used in an MTK ADC driver with this new generic version. Change-Id: I6de38ee00673c46332ae92b8a11099485de5327a Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/29315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-11-06soc/amd/common: Fix function formatingRichard Spiegel
There are functions within heapmanager.c that have a space between the function name and open parenthesis. Remove these spaces. BUG=b:117950051 TEST=build grunt. Change-Id: I2120d9d5f663453b6201d1872f29c6dc4abd6191 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29230 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-05soc/amd/stoneyridge: Get rid of void pointer mathRichard Spiegel
Pointer math with void pointers is illegal in many compilers, though it works with GCC because it assumes size of void to be 1. Change the pointers or add parenthesis to force a proper order that will not cause compile errors if compiled with a different compiler, and more importantly, don't have unsuspected side effects. BUG=b:118484178 TEST=Build and boot grunt. Change-Id: Ibfeb83893f09cb897d459856aff2a4ab2a74e6e5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-05mediatek/mt8183: Add DDR driver of software impedance partHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Change-Id: I42a33ffb66ffa2f938f85484ffc3a0d3788816b3 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/28837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-11-05src/soc/intel/braswell/romstage/romstage.c: Perform RTC init in romstageFrans Hendriks
soc_rtc_init() is executed in ramstage The soc_rtc_init() needs to be executeed before FSP is called. Move the RTC init from ramstage to romstage. BUG=N/A TEST=Intel CherryHill CRB Change-Id: Ic19c768bf9d9aef7505fb9327e4eedf7212b0057 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/29397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-11-05soc/intel/cannonlake: Enable ISH from deviceLijian Zhao
PCH ISH enabled/disabled in FSP memory init UPD, it will be match the setting in ISH device on/off in devicetree.cb. BUG=N/A TEST=Build and pass on whiskey lake rvp platform. Change-Id: I6889634bf65e7ce5cc3e3393c57c86d622f1ac68 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2018-11-05soc/intel/cannonlake: Remove depreciated UPD selectionLijian Zhao
Several FSP silicon init UPD have been moved to memory init stage, modify the coreboot accordingly. The UPDs below are affected: SkipMpInit VtdBaseAddress VtdDisable X2ApicOptOut BUG=N/A TEST=Build pass with FSP revision 7.0.47.50. Change-Id: Ic0416dcd9ea1fe063cdd0c2f27257cd4cb4ba7e8 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29260 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-05riscv: add support smp_pause / smp_resumeXiang Wang
See https://doc.coreboot.org/arch/riscv/ we know that we need to execute smp_pause at the start of each stage and smp_resume at the end of each stage. Change-Id: I6f8159637bfb15f54f0abeb335de2ba6e9cf82fb Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/29023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-11-05src: Remove unneeded include <arch/ioapic.h>Elyes HAOUAS
Change-Id: Ic08b191ee4dbcc56eb482601aa268394545936ba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29292 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-05soc/intel/icelake: Add PID based on Icelake EDSAamir Bohra
Change-Id: I2d9e06f06a39dc76a3c1351d7976505d7bd92d10 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/29436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-02mediatek/mt8183: Add AUXADC driverPo Xu
We plan to get board id and RAM code from AUXADC on Kukui. Add AUXADC driver to support it. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I121a6a0240f9c517c0cbc07e0c18b09167849ff1 Signed-off-by: Po Xu <jg_poxu@mediatek.com> Reviewed-on: https://review.coreboot.org/29061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-02soc/intel: Enable GPIO functions in verstageDuncan Laurie
Enable GPIO functionality in verstage so platforms can read a PCH GPIO in verstage to determine recovery mode. Change-Id: Icd4344c4d66dbe21fda9dc27e61a836c1dd9be07 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29407 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-02soc/intel/icelake: Allow coreboot to reserve stack for fspAamir Bohra
Change-Id: I5f2d9548b8e2c7b1d154b7bad126ec7b1052231a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/29317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-11-01src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-31soc/amd/stoneyridge: Fix get_cpu_count()Martin Roth
In commit 41baf0c3ff (soc/amd/stoneyridge: Remove dev_find_slot where possible), the register being read was changed accidentally from HT_DEV (Device 18h, Func 0) to NB_DEV (Device 18h, Func 5) This doesn't return the correct value, and causes Grunt to reboot. BUG=b:118721473 TEST=Boot grunt Change-Id: I7b73358a074dd27639aafead7c8b39f0fad5685f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/29367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-10-31soc/amd/stoneyridge: Get rid of domain_read_resourcesMartin Roth
The function domain_read_resources() didn't have any code to actually reserve any resources - it was just creating an empty resource entry. I looked at fixing it to actually reserve the space, but the values in the registers at the point when this runs aren't the final values that we want to reserve anyway, they're temp values with a range much larger than we want to reserve. I next looked at moving the amd_initcpuio() function earlier so that we could get the correct values for the registers, but even that doesn't give us what we really want. Ultimately removing this whole function seems to be the right thing. BUG=None TEST=Verify that the only resource that changes is the empty resource: PCI: 00:18.0 resource base 0 size 0 align 0 gran 0 limit 0 flags 1 index 1080 Change-Id: I83bd3ea8db141416632c12fc883386070363f2f1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/29345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-31soc/intel/apollolake: Revert the w/a nWR_24 settingJohn Zhao
GLK FSP 2.0.6.0 has properly determined MR1 value during InitializeJedec. Revert the w/a code "odt_config |= nWR_24" in coreboot. BUG=b:118422998 CQ-DEPEND=CL:*703187 TEST=Verified booting to kernel. Change-Id: I6dd3c14b2048259a5518e1f72ff1061b9c5c7dfe Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-31soc/intel/icelake: Open ports 0x60,0x64 for keyboard controllerShelley Chen
BUG=b:112110028 BRANCH=none TEST=boot into recovery in ec console: kblog on (type on keyboard) kblog make sure buffer is not empty Change-Id: I6525c2a46eef835dc64682466364a5b8fbb35226 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/29327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-10-30src: Move shared amd64 and IA32 MSRs to <cpu/x86/msr.h>Elyes HAOUAS
Change-Id: Ic9022a98878a2fcc85868a64aa9c2ca3eb2e2c4e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29177 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-30soc/amd/stoneyridge: Set IOMMU support to follow device settingMartin Roth
Instead of forcing the IOMMU to be enabled, change it to only be enabled if the device is enabled in devicetree. BUG=b:118612241 TEST=Verify that IOMMU is disabled. Change-Id: I6cfd6c81f47de23c54a49ec7cf87b219215ced5e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/29343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-10-30soc/amd/stoneyridge: Remove dev_find_slot where possibleRichard Spiegel
The procedure dev_find_slot has 3 main uses. To find configuration (devicetree), to verify if a particular device is enabled at build \ time, and to get the address for PCI access while in bootblock/romstage. The third use can be hidden by using macros defined in pci_devs.h, making it very clear what PCI device is being accessed. replace the temporary pointers to device used with PCI access with SOC_XXX_DEV where XXX is the device being accessed, and remove the setting of the temporary pointers. BUG=b:117917136 TEST=Build grunt. Change-Id: Ic38ea04bfcc1ccaa12937b19e9442a26d869ef11 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-30src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: I6a9d71e69ed9230b92f0f330875515a5df29fc06 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29312 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-30sifive/fu540: correct cbmem supportPhilipp Hug
Return correct memory location for cbmem instead of incorrectly returning memory size. Change-Id: If7f490a46edebb04c2280bf317d1adacef08f30d Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/29197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xiang Wang <wxjstz@126.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-29tegra210_lp0: make sure to build with compiler.h includedNico Huber
Like in ce1064e (tegra124_lp0: make sure to build with compiler.h included), fix builds where `compiler.h` is needed. Change-Id: If4b60a9db4520b58e48339a7e2726f2545cb4102 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-27soc/intel/*: Make FSP header path user configurablePatrick Georgi
Required to compensate for Chrome OS' tree differences Change-Id: I01fe80b55c69ff57da1c96a76bd1d9b5a2d4a9a8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-26soc/intel/icelake: Do initial SoC commitAamir Bohra
Clone entirely from Cannonlake commit id: 3487095304dbbbf66de86f8bce0e40b7acb3ea27 List of changes on top off initial cannonlake clone 1. Replace "Cannonlake" with "Icelake" 2. Replace "cnl" with "icl" 3. Replace "cnp" with "icp" 4. Rename structrue based on Cannonlake with Icelake 5. Remove and clean below files 5.a. All NHLT blobs and related files. 5.b. remove cnl_memcfg_init.c file, will be added later. 5.c. Remove vr_config.c, this is WIP. 5.d. Clean up upd override in fsp_params.c, will be added once FSP available. 5.e Remove CNL-H based GPIO configuartion. Ice Lake specific changes will follow in subsequent patches. Change-Id: I756fa7275c4190aebc0695f14484498aaf5662a5 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/29162 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-26mediatek/mt8183: Correct MPU ctrl register addressHuayang Duan
Remove unused members in emi_mpu_regs and sdram_params. Change mpu_ctrl_d to array so the offset (0x804) for D1 is corrected. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Change-Id: I95c002058dc5e1cba868334fecf8f42bd3e497e6 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/29251 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-26soc/intel/cannonlake: Add back PM TIMER EMULATIONLijian Zhao
ACPI PM timer emulation will be added back as default FSP stops TCO count for power saving, which will also stop ACPI PM timer within PCH. CPU PM TIMER EMULATION will help UEFI payload pass, instead of endless loop wait for ACPI PM timer counter to increase. BUG=N/A TEST=Build and boot up fine with whiskey lake rvp board into UEFI shell. Change-Id: Ie069e815e6244c3f85fabf51e186311621d316fd Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28937 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-25soc/amd/common/def_callouts.c: Prefer using '"%s...", __func__'Richard Spiegel
In function agesa_GfxGetVbiosImage(), the function name is used in a print string. Use __func__ instead. BUG=b:117642170 TEST=Build grunt. Change-Id: I95a042bd95cc729305a8a008e3bb464f60c2668d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-25soc/amd/stoneyridge: Remove "else" after a returnRichard Spiegel
File ramtop.c has one instance of if()/else where the if tests for top mem in lower 4GiB, and returns just before the "else" statement. These "else" statements are not needed. BUG=b:117648025 TEST=Build and boot grunt. Change-Id: Iba16a416e78dae75a95a11d38179161c5a11b2ad Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29247 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-25soc/intel: Consolidate FSP CAR setup and teardown codePraveen hodagatta pranesh
This patch adds following changes, - APL, CFL, DENVERTON soc's using same implementation to setup and teardown FSP CAR. Hence cache_as_ram_fsp.S from soc folder is cosolidated into one file and moved to common code CPU car folder. - exit_car_fsp.S is from APL, DNV soc folder is clubbed into one file and moved to common CPU car. - The new file apollolake/fspcar.c is addded to pass tempraminit parameters. - Coffee lake Soc uses FSPT to support Intel Security features like BootGuard verify boot and Measured boot. Add FSP CAR support for CFL by programming tempraminit parameters and add FSP_T_XIP default if FSP_CAR is selected. BUG= None TEST= Build for both CFL RVP11 & RVP8 and verified for successful CAR setup. Build for both leafhill and harcuvar platform by selecting CONFIG_FSP_CAR without errors. Change-Id: I98d2dd9711ddc0d7ea7d1672fba700259ee3a3a9 Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-25soc/intel/cannonlake: Enable S4 sleep state supportpraveen hodagatta pranesh
Add ACPI entry in sleepstates.asl to support S4 (hibernate). TEST: boot to Windows on CFL RVP11 & RVP8, verified hibernate functionality. Change-Id: I751c774e6ec7fd89ac3af5a619033bd38a759281 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-25soc/amd/common/pi: Correct top of DRAM reporting by AGESAMarshall Dawson
Accurately reflect the intention of the syslimit value returned from AmdInitPost(). Assume FFs for the non-present bits. BUG=b:118178425 TEST=Boot Grunt and verify reported value = TOM2-1. Change-Id: Ie8ea4fcbfd52c46ad441890f0decaf0f55816cfd Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-24mediatek/mt8183: Initialize DRAM with a sequence in constant arrayHuayang Duan
The DRAM init sequence is simply setting some values on register for all DRAM modules, no logic involved; so we can replace it by an array to configure easily. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Change-Id: Iacd3ce909ba7a0bdf699c5bfcb2b97f383d7bb6f Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/28836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-24vboot: fix CONFIG_RESUME_PATH_SAME_AS_BOOT S3 resume logicJoel Kitching
- should not check VBOOT_STARTS_IN_BOOTBLOCK to set context flag - implement vboot_platform_is_resuming on platforms missing it - add ACPI_INTEL_HARDWARE_SLEEP_VALUES to two intel southbridges [ originally https://review.coreboot.org/c/coreboot/+/28750 ] BUG=b:114018226 TEST=compile coreboot Change-Id: I1ef0bcdfd01746198f8140f49698b58065d820b9 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/29060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-23soc/amd/stoneyridge: Remove smbus.aslRichard Spiegel
The file smbus.asl has 0 bytes (no content). Now that it's no longer included, remove it. BUG=b:117814641 TEST=Build grunt and gardenia. Change-Id: I66389c721e272053d86357f71a6d1242ca767edd Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-23soc/intel/common/block/gpio: Allow GPI to be dual-routedFurquan Shaikh
This change adds new macros to GPIO common library helpers to allow a GPI pad to be dual routed using PAD_CFG_GPI_DUAL_ROUTE. It also adds a helper macro to configure a pad for IRQ and wake. Above macros are guarded using a newly added Kconfig option SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT that is selected only by SoCs that have been validated to allow dual route of GPIs. Currently, this config is selected only for APL/GLK/SKL/KBL that have been validated to work with dual-routing of GPIs for IRQ and wake. BUG=b:117553222 Change-Id: Iaa623d2d78a50f1504e3abe9a47a5a663693aead Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29188 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-23soc/intel/common/block/gpio: Configure Tx Disable in IO standby for GPIsFurquan Shaikh
This change updates various PAD_CFG_GPI* macros to configure Tx as Disabled in IO Standby state. This is done to ensure that the Tx setting is same in IO Standby state as it was in active state i.e. Tx disabled. BUG=b:17553222 Change-Id: If462aee3884cc61a519fb358b84867c695ace251 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-23soc/intel/apollolake: Add reset code to postcar stagePatrick Georgi
Also add a test case for that, a config taken from chromiumos with some references to binaries dropped that aren't in our blobs repo (eg audio firmware). Change-Id: I411c0bacefd9345326f26db4909921dddba28237 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29223 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22intel: Use CF9 reset (part 2)Patrick Rudolph
Make use of the common CF9 reset in SOC_INTEL_COMMON_RESET. Also implement board_reset() as a "full reset" (aka. cold reset) as that is what was used here for hard_reset(). Drop soc_reset_prepare() thereby, as it was only used for APL. Also, move the global-reset logic. We leave some comments to remind us that a system_reset() should be enough, where a full_reset() is called now (to retain current behaviour) and looks suspicious. Note, as no global_reset() is implemented for Denverton-NS, we halt there now instead of issuing a non-global reset. This seems safer; a non-global reset might result in a reset loop. Change-Id: I5e7025c3c9ea6ded18e72037412b60a1df31bd53 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-22intel: Use CF9 reset (part 1)Patrick Rudolph
Add SOUTHBRIDGE_INTEL_COMMON_RESET for all Intel platforms that used to perform a "system reset" in their hard_reset() implementation. Replace all duplicate CF9 reset implementations for these platforms. Change-Id: I8e359b0c4d5a1060edd0940d24c2f78dfed8a590 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-22soc/amd: Implement common reset APINico Huber
Add an `amdblocks` internal API and rename soft_reset() => warm_reset() hard_reset() => cold_reset() as these terms are commonly used in the surrounding code. On Stoney Ridge, make board_reset() call cold_reset() to keep current behaviour of common code calling hard_reset(). But add a TODO if this is intended. Note: Stoney Ridge is using CF9 for the actual reset but the configuration for a cold reset doesn't use the usual full reset bit but some other mechanism. Change-Id: Id33eda676d79529db759b85fa8e28386846e6fa4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-22soc/samsung/exynos5250: Convert to `board_reset()`Nico Huber
Change-Id: I2f69d9f01ac5f7e28dd98e704f3280bf62b9ce58 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22soc/mediatek: Convert to `board_reset()`Nico Huber
Note, MT8183 didn't select HAVE_HARD_RESET before. So it might still need an update. Change-Id: Ic850f2775ada5e6e543ffb92aaa033b9209596f5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22soc/imgtech/pistachio: Convert to `board_reset()`Nico Huber
Change-Id: If8fc29c46e2cbc69f94ea8b6dc414a93d82ffb28 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22soc/rockchip/rk3399: Convert to `board_reset()`Nico Huber
Change-Id: Id07e1c7fbd35393ffafda53fc7a15ec0e157d075 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-22reset: Convert individual boards to `board_reset()`Nico Huber
Change-Id: I6182da172ae2f4107a9b5d8190e4b3b10ed2f0b9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-19soc/lowrisc: Remove the remains of a LowRISC socPeter Lemenkov
Looks like we've got a race condition between commit ce8763fb with Change-Id I4e3e715106a1a94381a563dc4a56781c35883c2d ("mb/lowrisc: Remove the Nexys4DDR port") and commit 2e38dbe5 with Change-Id I5524732f6eb3841e43afd176644119b03b5e5e27 ("riscv: update mtime initialization"). Let's fix it. Change-Id: I03c5860b27d04b6e1d7868ba8ea7b52d1075aa6a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29165 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-19soc/intel/cannonlake: Enable HDA driver supportpraveen hodagatta pranesh
This patch selects common HDA driver and adds audio controller device id to enable audio on coffee lake platforms. BUG= None TEST= boot to yocto linux and windows os on CFL RVP11 & RVP8, verified audio functionalities. Change-Id: I4a60a4d7d8babcd0c14664a304ca81d47c668a6c Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29145 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18mediatek/mt8183: Add EMI init for DDR driver initHuayang Duan
Add EMI config to initialize memory. BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I945181aa1c901fe78ec1f4478a928c600c1b1dea Reviewed-on: https://review.coreboot.org/28835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-18mediatek/mt8183: Add register definitions of DRAM controllerTristan Shieh
Add register definitions of DRAM controller. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I8b51486deab856a783b87f0b2812a991d4111020 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-18cpu/amd: Use common AMD's MSRElyes HAOUAS
Phase 1. Due to the size of the effort, this CL is broken into several phases. Change-Id: I0236e0960cd1e79558ea50c814e1de2830aa0550 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-18soc/amd/stoneyridge: Replace double defined MISC MMIO reg. 0x40Richard Spiegel
Register 0x40 of miscellaneous MMIO is double defined, with different names, which makes it confusing. Eliminate MISC_MISC_CLK_CNTL_1, and move its only bit definition to MISC_CLK_CNTL1 (which is correctly placed among MMIO registers. BUG=b:117818431 TEST=Build grunt. Change-Id: I5ca5045498b8a81943282e0d6ecfbaecbd600d19 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-18soc/amd/stoneyridge: Remove double defined SPI100_SPEED_CONFIGRichard Spiegel
SPI100_SPEED_CONFIG is double defined. Bits and shift definitions on the first definition are unused. Remove first definition and its associated bits and shifts. BUG=b:117818430 TEST=Build grunt. Change-Id: I8175b9a2f379b47475a71f93096f682bc56d051c Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-18soc/amd/stoneyridge: Remove double definition for wideioRichard Spiegel
WIDEIO_RANGE_ERROR and TOTAL_WIDEIO_PORTS are defined twice. Remove the definitions within MMIO definitions, as wideio is not related to MMIO. BUG=b:117814228 TEST=Build grunt. Change-Id: I370a5b387b908fe7a840eb7579d45c1a6a9ca615 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-18soc/amd/stoneyridge: Remove DEV_D18F4 definitionRichard Spiegel
The definition DEV_D18F4 is only used once, in file tsc_freq.c, and is the same as SOC_PM_DEV. Remove the definition, and replace its use in tsc_freq.c with SOC_PM_DEV. BUG=b:117754424 TEST=Build and boot grunt. Change-Id: I9eeeaa084e5b16280713b8b833b4faa78d277586 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-18soc/amd/stoneyridge: Remove double defined GPIO MMIO basesRichard Spiegel
GPIO control a mux base addresses are defined within MMIO definitions and again bellow as GPIO specific base addresses. Eliminate those outside MMIO bases. Rename them to something indicating that they are both MMIO and related to GPIO. BUG=b:117754420 TEST=Build grunt. Change-Id: I53f7cf17d6267e6f8daa650b5f864bab688dc3f0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29156 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18amd/stoneyridge/include/soc: Re-arrange NB IOAPIC definitionsRichard Spiegel
There's no indication that they are accessed through D0F0. Add a D0F0 header and move IOAPIC definitions under it. The registers defined to be accessed through index/data pair should be indented relative to the index/data pair definition. BUG=b:117754786 TEST=Build grunt. Change-Id: If4fb6514bb13f1c944d0e1756d8d9de1f08c99f3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29155 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18soc/amd/stoneyridge/smi.c: Prefer using '"%s...", __func__'Richard Spiegel
In function smm_setup_structures(), the function name is used in a print string. Use __func__ instead. BUG=b:117642170 TEST=Build grunt. Change-Id: Icac5ea997289ef75fb246a09715cbca4442a57f4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29154 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18soc/amd/stoneyridge/southbridge.c: Change comparison orderRichard Spiegel
Comparison should place the constant on the right side. Southbridge.c has 6 instances where the opposite happens. Reverse the order of six comparisons to eliminate checkpatch warnings: WARNING: Comparisons should place the constant on the right side of the test BUG=b:117656929 TEST=Build grunt. Change-Id: I94f17b81f845fa94599f93c0be1144ffcb8e4165 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29153 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18soc/amd/stoneyridge: Remove "else" after a returnRichard Spiegel
File smbus_spd.c has 2 instances of if()/else where the if tests for an error condition and returns just before the "else" statement. These "else" statements are not needed. BUG=b:117648025 TEST=Build and boot grunt. Change-Id: Ie8298773ae455dbb1125420ec65df24f3c65eb44 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29152 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18intel/common/block: Fix issue found by klockworkJohn Zhao
src/soc/intel/common/block/pmc/pmclib.c Function acpi_get_sleep_type: Pointer ps checked for NULL may be dereferenced. BRANCH=None TEST=Built & booted Yorp board. Change-Id: I15fe39fd9f930be56d03c2ffe62fb6f17249d4b5 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-18soc/intel/skylake: Prevent disabling of TCONaresh G Solanki
In Skylake/Kabylake, if ACPI PM timer is disabled then TCO also gets disabled & vice versa. FSP default config for EnableTcoTimer is disabled, this caused ACPI PM timer & TCO to be disabled by FSP even when config PmTimerDisable = 0. Thus update FSPS UPD EnableTcoTimer in accordance to devicetree config PmTimerDisable. BUG=None TEST= Build for Soraka with PmTimerDisable=0 & check if TCO caused reboot after running shell command: cat >> /dev/watchdog0 Change-Id: Ia146761036c9dbaef3c02c9a7122ae3dcdef7bdd Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/29108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-10-17soc/intel/cannonlake: Add CNP PCH-H gpio pin definitionspraveen hodagatta pranesh
- CNL PCH-H has 12 GPIO groups which are grouped under 5 gpio communities. - Add gpio pin definitions for CNP-H and related changes. - Add gpio device name, host software ownership reg offset for CNP-H. BUG: none TEST: build and flash, boot to windows and yocto os on both CFL RVP8 & RVP11 and verify power management, IO device functionalities work fine. Change-Id: I496ec059de125b97c646581bbd3b8bfe6ffa641e Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-17soc/intel/cannonlake: Add new cannon lake PCH-H supportpraveen hodagatta pranesh
Cannon lake PCH-H is added to support coffee lake RVP11 and coffee lake RVP8 platforms. - Add new device IDs for LPC, PCIE, PMC, I2C, UART, SMBUS, XHCI, P2SB, SRAM, AUDIO, CSE0, XDCI, SD, MCH and graphics device. - Add new device IDs to intel common code respectively. - Add CPU, LPC, GD, MCH entry to report_platform.c to identify RVP11 & RVP8. - CNL PCH-H supports 24 pcie root ports and 4 I2C controllers, hence chip.c is modified accordingly. - Add board type UserBd UPD to BOARD_TYPE_DESKTOP for both RVP11 & RVP8. BUG=None TEST=successfully boot both CFL RVP11 & RVP8, verified all the enabled devices are enumerated and cross checked devices ids in serial logs and UEFI shell. Change-Id: I4b6af88d467382250aecb4102878b1c5af92ccd4 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28718 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17mediatek/mt8183: Add USB supportJumin Li
This patch implements SoC-specific defines of mt8183 and links the common code to support USB. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1224cf24f92b07f3c1814f1cbfef96aafa5a992b Signed-off-by: Jumin Li <jumin.li@mediatek.com> Reviewed-on: https://review.coreboot.org/28787 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17mediatek: Refactor USB code among similar SoCsTristan Shieh
Refactor USB code which will be reused among similar SoCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I06fefb4149a489be991e13ddf624082d11e31765 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-17soc/cavium/cn81xx: Drop dead do_soft_reset() implementationNico Huber
Change-Id: I85f357739220f16497f65df1bb317d9d6eb54d9f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-14soc/amd/stoneyridge: Define PM USB Enable registerMarshall Dawson
Make #define definitions for PMxEF and replace the hardcoded values. Note that this doesn't change the current functionality of the source. The existing code has been propogated from the sb//hudson port, which seems to attempt to enable 100% of all OHCI and EHCI controllers that may be present in the system. Change-Id: I6018b0062730de19e3283a010144dfedc2b11423 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29075 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-14soc/amd/stoneyridge: Remove hudson EHCI debug controllersMarshall Dawson
Remove nonpreset controllers from the PCI device identifier function (ignoring any CONFIG_USBDEBUG_HCD_INDEX). The extra devices appear to be holdovers from the original sb/hudson source. TEST=Jam Makefile.inc to unconditionally build enable_usbdebug.c and verify proper BDF is returned in romstage and ramstage. Change-Id: I2e819d5e998922ad427c4a094c29a590f249a0d3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-14soc/amd/stoneyridge: Remove errant parenthesis in southbridge.hMarshall Dawson
Delete an unmatched opening parenthesis in the definition for the EHCI hub config register definition. This wasn't causing a problem unless EHCI debug was enabled. TEST=Jam Makefile.inc to unconditionally build enable_usbdebug.c and verify successful build Change-Id: I5f461d1573e416b5a8ee24329142e3c46b6a05e3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29073 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-14soc/amd/stoneyridge: Rearrange southbridge.h moreMarshall Dawson
Move the SPI base address register definition to D14F3. This was missed in: bba043 amd/stoneyridge: Rearrange southbridge.h Change-Id: Ia722339418c118bdf4b000bbf97ae4266e9b3be2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-12drivers/intel/fsp2_0: Hook up IntelFSP repoPatrick Georgi
With https://github.com/IntelFsp/FSP/pull/4 merged, this allows using Intel's FSP repo (that we mirror) to build a complete BIOS ifd region with a simple coreboot build, automatically drawing in headers and binaries. This commit covers Apollolake, Coffeelake, Skylake, and Kabylake. Skylake is using Kabylake's FSP since its own is FSP 1.1 and Kabylake's also supports Skylake. Another candidate (given 3rdparty/fsp's content) is Denverton NS, but it requires changes to coreboot's FSP bindings to become compatible. Cannonlake, Whiskeylake require an FSP release. Change-Id: I8d838ca6555348ce877f54e95907e9fdf6b9f2e7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28593 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-12amd/stoneyridge: Fix PmControl register size in SMI handlerMarshall Dawson
The AMD implementation of this register is only 16 bits. Change the source accordingly. TEST=Suspend/Resume a Grunt several times Change-Id: Ib900468cc1c790fa7d57bb6faa91aee012173f7a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Rename CGPLL_CONFIG definitionsMarshall Dawson
Shorten the names in the MISC CGPLL_CONFIG, and make the formatting match the surrounding source. Change-Id: I71cf1ff6bd4bca7a25484b4da9388c17cfecc043 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Rename GppClkCntrl fieldsMarshall Dawson
Make the field names of the MISCx00 GPPClkCntrl more manageable by shortening their names. Make the definitions look more like the rest of the header file. Change-Id: I515cd664808e38851a7dbdba899df4fb9bbbcde6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Rearrange southbridge.hMarshall Dawson
Group definitions so they're near others of the same type, e.g. PCI, AcpiMmio, etc. Change-Id: Ia6ef21431db0e758eba0ea043b54c036ec6235fe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Remove dead GPIO definitionsMarshall Dawson
Delete definitions that are no longer used. Change-Id: I94c9c33f73c1a2d9308408e3e9ca526e876d6135 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Clarify XHCI_PM register definitionsMarshall Dawson
Change-Id: I1b44ffd7c0244b0408c3823d634a9b8d5038462f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Fix SPI_CMD_TRIGGER coding styleMarshall Dawson
Make the whitespace match surrounding lines and remove unnecessary parentheses. Change-Id: I2ed02494ba69237c38af61317e435d9575cefe1c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Convert hex definitions to lower caseMarshall Dawson
Match the rest of the soc/stoneyridge source. Change-Id: I4531e6dad0362be73499647d9fc93c168b6f163e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Remove hudson register definitionsMarshall Dawson
Delete artifacts remaining from the original "hudson" and "yangtze" controller hub designs. Husdon devices had a configurable AcpiMmio base address, and a selection for I/O vs. MMIO decode. Modern products are fixed at 0xfed80000 in MMIO. Remove the flash control register definitions for the old generations. The manual reset register appears to not function as hudson. PMIO_DEBUG is named differently now, and not used, so remove its definition too. Change-Id: I6484bb2ca80b65318565dfee1a3368b121aea9de Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-11src: Move common IA-32 MSRs to <cpu/x86/msr.h>Elyes HAOUAS
Use "cpu/x86/msr.h" for common IA-32 MSRs and correct IA-32 MSRs names. Change-Id: Ida7f2d608c55796abf9452f190a58802e498302d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28752 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11src: Replace MSR addresses with macrosElyes HAOUAS
Change-Id: I849dd406f5ccc733d4957eaf1c774745782f531a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-10-11amd/stoneyridge: Indicate STAPM units in their nameRichard Spiegel
STAPM devicetree registers do not indicate the unit, which causes confusion. More importantly, the time was assumed to be in seconds when it's actually milliseconds. This caused early STAPM configurations to fail. BUG=b:117590953 TEST=Build grunt Change-Id: I2a7e3d43601992d1f7b02456913c763d940fe9ee Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29035 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11selfboot: remove bounce buffersRonald G. Minnich
Bounce buffers used to be used in those cases where the payload might overlap coreboot. Bounce buffers are a problem for rampayloads as they need malloc. They are also an artifact of our x86 past before we had relocatable ramstage; only x86, out of the 5 architectures we support, needs them; currently they only seem to matter on the following chipsets: src/northbridge/amd/amdfam10/Kconfig src/northbridge/amd/lx/Kconfig src/northbridge/via/vx900/Kconfig src/soc/intel/fsp_baytrail/Kconfig src/soc/intel/fsp_broadwell_de/Kconfig The first three are obsolete or at least could be changed to avoid the need to have bounce buffers. The last two should change to no longer need them. In any event they can be fixed or pegged to a release which supports them. For these five chipsets we change CONFIG_RAMBASE from 0x100000 (the value needed in 1999 for the 32-bit Linux kernel, the original ramstage) to 0xe00000 (14 Mib) which will put the non-relocatable x86 ramstage out of the way of any reasonable payload until we can get rid of it for good. 14 MiB was chosen after some discussion, but it does fit well: o Fits in the 16 MiB cacheable range coreboot sets up by default o Most small payloads are well under 14 MiB (even kernels!) o Most large payloads get loaded at 16 MiB (especially kernels!) With this change in place coreboot correctly still loads a bzImage payload. Werner reports that the 0xe00000 setting works on his broadwell systems. Change-Id: I602feb32f35e8af1d0dc4ea9f25464872c9b824c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/28647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 01:21:19 +0000