Age | Commit message (Collapse) | Author |
|
This removes all the duplicated code and logic and leverages
the existing ones in libraries themselves. The current side
effect is that protection cannot be fully enabled because the
read, write, and write enable command are not exposed in struct
spi_flash currently. That support can be revised if protection
scheme makes sense for our use-cases once it's better understood.
BUG=b:146928174
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I8faf9cc719ee33dd9f03fb74b579b02bbc6a5e2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37957
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2d62c470c5389af3b10e47ca5e721b78ff16bc79
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It is expected that smbuslib.c will be removed, leave the
parts we want to keep in smbus_early.c.
Change-Id: I21355fe95385d07c9f254fc80c90264a9539bb00
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Id3fa0745e90d8bb99965eceec0ac129fe0ff7446
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Add missing Power Management 2, old and new GPIO functions to modify the
contents of these MMIO blocks.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie4db6a4d12d9122ea5b87147adbf7b632ac2b311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Hide the fundamental BIOSRAM accessors to force use of the
memory space via abstraction functions.
Change-Id: I774b6640cdd9873f52e446c4ca41b7c537a87883
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37862
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These devices were just added in 727ac0d263 (AMD {SoC, AGESA, binaryPI}:
Don't use both of _ADR and _HID), but they don't provide any information
and are not referenced anywhere.
Change-Id: I862a3c43eb610e488eb7d9246feb94a6d1333ca0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Most of these are leftovers from the initial copy from Baytrail.
Change-Id: I1c437f34902400022ac6a5e95ff6168545ca557f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ie4293094ad703a2d8b68a8c640bd8d9cece2e6e8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I73ff8adeb2751ed4035c60f7387576460bdd47e8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I7e3dc64648af05d51a319019397f24ba74c25c37
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Provide the PM1_TMR information in the FADT even if PmTimerDisabled is
set because PM timer emulation is enabled via MSR 121h so the timer will
still work and can be used by things like Tianocore and Windows.
Porting from 662b6cb3ed (soc/intel/skylake: Always add PM1_TMR block to FADT).
Change-Id: Ie3d592623f3a84051477ffe83a0cf0daf30dd36f
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
When checking that command and data fit in the FIFO, don't count the first
byte. The command doesn't go through the FIFO.
TEST=confirm error (4+68>71) goes away on Mandolin
BUG=b:146225550
Change-Id: Ica2ca514deea401c9c5396913087e07a12ab3cf3
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There are no symmetrical headerfiles for other arch/ and
after ROMCC_BOOTBLOCK and walkcbfs() removal this file
ended up empty.
Change-Id: Ice3047630ced1f1471775411b93be6383f53e8bb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Codec vendor ID was copy/pasted from Haswell, should be
0x80862808. Subsystem ID for Intel Mini-HD is always 0x80860101.
Change-Id: Idf4446d3437de0dc533baa3b2b4eb49f816807a6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37860
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable GPIO clock gating when enter s0ix/Sx and save the PM bits.
Restore the PM bits when exit s0ix/Sx.
BUG=b:144002424
TEST=Check GPIO PM bits when enter/exit s0ix are expected
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I120f8369b8d3cf7ac821332bdfa124f6ed0570e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The APOB NV region holds the save data for resuming. Omit it if the
mainboard doesn't use HAVE_ACPI_RESUME.
The APOB information will also be board-specific so remove the
default values.
Change-Id: I65a70bb86ad1f3c11ce37d0afa5a6fdd08bc46e2
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic6b66dd8fa387e67bb0ce609fb7e2553eeb66b3c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch makes below clean-up for report_cpu_info() function.
1. Remove unused variables.
3. Reuse fill_processor_name.
TEST = Successfully able to boot hatch and verify the
cpu_name "CPU: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz"
Change-Id: I41c76eb93f0c5229c4a49ab041339b6ad51ad24a
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This patch keeps required pch_early_init() function like ABASE programming,
GPE and RTC init into bootblock and moves remaining functions like TCO
configuration and SMBus init into romstage/pch.c in order to maintain only
required chipset programming for bootblock and verstage.
Rename the pch_init function to bootblock_pch_init and romstage_pch_init
according to the stage it is defined in.
TEST=Able to build and boot hatch successfully.
Change-Id: Idf7b04edc3fce147f7857561ce7d5b0cd05f43fe
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This patch renames pch_init function to bootblock_pch_init and
romstage_pch_init according to the stage it is defined in.
TEST=Able to build and boot soraka successfully.
Change-Id: Idf7b04edc3fce147f7957561ce7d5a0cd05f53fe
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Change-Id: I9c65d3c54efcdec1ebb2648d078acdd9e7c11c49
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
If the board doesn't provide VRconfig in devicetree make sure to use
the lookup table for IccMax instead of defaults for some mobile SoC.
Also use decimal values instead of hex.
Change-Id: If31063f9b483a3bbd6cc90df1c1b76b4efc66445
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37598
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tigerlake and Jasperlake fsp requires stack size to be minimum 192 KiB
and heap size to be minimum 128 KiB.
Updating both Kconfig to meet size requirements.
Also updated required CAR region size during boot block due to increment
in stack & heap requirement by fsp
Change-Id: I38e93b5986811ff3e0a8df5f4f36af35f308cb6b
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37764
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The delay cell result should use DDR clock PLL rate for computation,
and should not be divided by 2.
This helps to improve DRAM stability.
BUG=b:80501386,b:142358843
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Idf5cce206e248bb327f9a7d27c4f364ef1c68aa1
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
PCI devices starting from 18 are processor configuration devices for each
node and are not a bus itself.
According to ACPI specification 6.3 section 6.1.5:
"... _HID object must be used to describe any device that will be
enumerated by OSPM. OSPM only enumerates a device when no bus enumerator
can detect the device ID. ... Use the _ADR object to describe devices
enumerated by bus enumerators other than OSPM."
PCI device 18 with its functions has a standard enumerator, which is PCI
enumerator so it needs a _ADR. Create a separate ACPI device for the
processor configuration space. This fixes the ACPI compliance problem
from CB:36318.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie7b45ce8d9e4fdd80d90752bf51bba4d30041507
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37835
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP logo handling used PcdLogoPtr and PcdLogoSize which are elements of
the chipset specific FSP structures.
Create soc_load_logo() which will pass the logo pointer and size.
This function will call fsp_load_logo which will load the logo.
BUG=NA
TEST= Build and verified logo is displayed on Facebook FBG1701
Change-Id: I86943e64ca1ddd05e7e88fc6b882cfd33b98272e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37791
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I63b95144f2022685c60a1bd6de5af3c1f059992e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37828
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use MIN() and MAX() defined in commonlib/helpers.h
Change-Id: I02d0a47937bc2d6ab2cd01995a2c6b6db245da15
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37454
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the old Stoney Ridge postcar stack frame setup. Reduce
romstage.c to basic functionality. Until AGESA's reporting of
memory configuration is available, use the TOM register as an
indicator for the top of usable memory.
Change-Id: I516b79c3e798f5fc68c2771b2f66034c6867b19e
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
No AGESA v5 binaryPI features are still present in the picasso directory.
Remove the PI and S3 selects. Remove DCACHE symbols. Remove all vboot
options until the new PSP-based solution is developed.
Change-Id: I6542578afafc0ee3c3117a971b1a021dbe53f42c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
If stage cache is enabled, we should not allow S3 resume
to load firmware from non-volatile memory.
This also adds board reset for failing to load postcar
from stage cache.
Change-Id: Ib6cc7ad0fe9dcdf05b814d324b680968a2870f23
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP logo handling used FspsConfig.LogoPtr and FspsConfig.LogoSize which
are chipset specific.
Create soc_load_logo() which will pass the logo pointer and size.
This function will call fsp_load_logo which will load the logo.
BUG=NA
TEST= Build and verified logo is displayed on Facebook Monolith
Change-Id: I30c7bdc0532ff8823e06f4136f210b542385d5ce
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37792
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add header files to fix build issues due to missing declaration
for get_pch_series and die_with_post_code functions.
Change-Id: Ie8ba4970ec1b73c1e481f54bcfbf95be87d9c442
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Iaa236f07aed52ccb8c4839047894a14a9446a109
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I71a5a6c3748d5a3910970bfb1ec3d7ecd3184cfd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33686
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6a933295de7c41d62e6a95f955c098b49ea17f08
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33689
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I83322e246fe81b97188be17a3fdda16d36df0678
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33688
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icdd6b49751763ef0edd4c57e855cc1d042dc6d4d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I9b91184ee1daf4dd40f17984ef2a30756e845906
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I0bb44636f9ce6a9f96f5909926b586d0a6cedd9e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37383
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I404d149cd1052fa0aef233bd0e0867524c738477
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37382
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ifdfd37a59273c3647802bc7cb9774e61f90fe441
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37381
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Idba48b2182d38dd4945044c79c393c3fd514d720
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35988
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibf91c35aa389a91116463616a778212bb386756e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34230
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic25022bdba15219f79cfe172dc2512c3e18bca70
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35124
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9eedae837634beb5a545d97fdf9c1810faba5138
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37271
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skylake soc code sets the length of the PCIe configuration space to 64
MB while the specification allows up to 256 MB. Linux reports "acpi
PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bos 00-3f] only
partially covers this bridge".
Remove "select PCIEX_LENGTH_64MB" from Kconfig so the default 256MB will
be used and the size can be reduced on the mainboard level when required.
BUG=N/A
TEST=tested on facebook monolith
Tested is by booting Linux 4.15 and analyzing the coreboot and Linux
dmesg to make sure the memory range is reported correctly and doesn't
create an overlap.
Change-Id: I8a06b9fba5ad561d8595292a73136091ab532faa
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37704
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The _PRS for the LNK* items don't contain irq 11. So this is not
supposed to be used.
Add irq 11 to the list as there is no reason not to allow this.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I634d0ea8506a5e93359c652f74131231f5c13b02
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37690
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for automatic extraction of the Second Logical Boot
Partition from the supplied IFWI binary.
Change-Id: Ia2a9ca233bddb8e9fb4e980f0ae5e6fcf3fc757c
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37681
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The base address of the 16 MB flash range was reported as 0xFFF00000
this causes the range to extend above the 4GB boundary.
Change the base to 0xFF000000 as is the case with e.g. Skylake.
BUG=N/A
TEST=build
Change-Id: Ia8de01769ced00c5ae13f255760401933230b88c
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
ACPI method TEVT is reported as unused by iASL (20190509) when ChromeEC support is not
enabled. The message is “Method Argument is never used (Arg0)” on Method (TEVT, 1, NotSerialized),
which indicates the TEVT method is empty.
The solution is to only enable the TEVT code in mainboard or SoC when an EC is used that uses
this event. The TEVT code in the EC is only enabled if the mainboard or SoC code implements TEVT.
The TEVT method will be removed from the ASL code when the EC does not support TEVT.
BUG=N/A
TEST=Tested on facebook monolith.
Change-Id: I8d2e14407ae2338e58797cdc7eb7d0cadf3cc26e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
This impacts boards:
hatch (&variants) and drallion.
Some variants like Puff can have up to 12 cores. coreboot should take
the min() where MAX_CPU is the upper bound.
Further to that, boards themseleves shouldn't be setting the MAX_CPUS,
the chipset should be and so do that.
BRANCH=none
BUG=b:146255011
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: I284d027886f662ebb8414ea92540916ed19bc797
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Change-Id: I66d48206a4c1c31802e85c08ab935f81f10aadbc
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Change-Id: I38a721c359ab7761c5a3ea79da0c159fd7f58970
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37711
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We had to role the `fsp` submodule back for a minute due to a regression
with the Coffee Lake binary. Intel silently mixed FSP 2.1 features into
the Coffee Lake FSP which is supposed to be FSP 2.0. With the stack and
heap usage partitioned for FSP using coreboot's stack (config FSP_USES_
CB_STACK), it works again.
To make this even messier: We already selected this Kconfig option for
Whiskey Lake, which is supposed to use the very same FSP binary. So with
either submodule pointer, something was always broken :-/
Change-Id: Id2aa17aaa2c843dcc7e0fb28779d1e5948da83c9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mimoja <coreboot@mimoja.de>
|
|
Support configuring the qup dfsr registers.
Tested: validated DFSR clock configuration and M/N/D values.
Change-Id: I146ac7c2197606965265f2a770769312af76041e
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I662420e6e05a6489950c583dfd37df5826153214
Signed-off-by: Himanshu Sahdev aka CunningLearner <sahdev.himan@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: RONAK KANABAR <ronak199323@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Update PMC shadow register base address for Jasperlake
Correct PCH detection logic based on PCH ids and return correct base
address based on PCH detected since our code supports both tgl and jsl.
Change-Id: Iea3311b3dc8dc3ee5ea54db1148f386c2a5dd563
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
This reverts commit 01787608670adec26fcea48173e18395e51c790e.
AMD: Dropping the _HID of PCI root bus doesn't work well and people
started to notice the breakage.
Intel: These platforms have a devicetree switch to choose between PCI
and ACPI modes. In the former case we need _ADR, but in the latter _HID
as the PCI devices are hidden.
The conflicting use of _ADR and _HID still needs to be fixed before
we can bump our IASL version.
Change-Id: If7b52b9e8f2f53574849aa3fddfccfa016288179
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37710
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The split of bootblock initialisation to cpu, northbridge and
southbridge is not specific to intel at all, create new header
<arch/bootblock.h> as AMD will want some of these too.
Change-Id: I702cc6bad4afee4f61acf58b9155608b28eb417e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds PCI device IDs for CMP-H.
TEST=build coreboot.rom and boot to the OS
Change-Id: Ia7413f75757c64b389a39d6e171f88eb61036c58
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
For low frequency (e.g., 1600 or 2400 Mbps) we can do fast
calibration for TX and RX window. However, for high frequency
(e.g., 3200 or 3600 Mbps) a full calibration is needed.
BUG=b:80501386,b:142358843
BRANCH=kukui
TEST=Boots correctly on Kukui
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: I00d563ece4cf91ef5e8e12b6cf7f777849375a24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36921
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gpe0_en_* seem to have been copied over from previous generations but
recent SoCs don't use it. This change gets rid of these unused
members.
Change-Id: I165e66aeefde4efea4484f588c774795987ca461
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that we have a CONFIG_NO_FMAP_CACHE to completely configure out the
pre-RAM FMAP cache code, there's no point in allowing the region to be
optional anymore. This patch makes the section required by the linker.
If a board doesn't want to provide it, it has to select NO_FMAP_CACHE.
Adding FMAP_CACHE regions to a couple more targets that I think can use
them but I don't know anything about... please yell if one of these is
a bad idea and I should mark them NO_FMAP_CACHE instead.
Change-Id: Ic7d47772ab3abfa7e3a66815c3739d0af071abc2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add package and APU selections to mainboards and remove symbols no
longer used in soc//stoneyridge.
Change-Id: I60214b6557bef50358f9ec8f9fcdb7265e04663b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Make a new Kconfig symbol for using soc//stoneyridge. This code also
supports Prairie Falcon is backward-compatible with Carrizo and Merlin
Falcon.
Although Bettong uses Carrizo, it does not currently rely on stoneyridge
source, so it is unaffected by this change.
Change-Id: I786ca54b0444cbcf36dc428a193006797b01fc09
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
The stoneyridge code inferred that if Merlin Falcon was built but no
Merlin Falcon binaries were present, the intent must be Prairie Falcon.
The two falcons are Embedded variants, and Prairie Falcon falls within
Family 15h Models 70h-7Fh.
Add a Prairie Falcon symbol that can be used explicitely. Drop
HAVE_MERLINFALCON_BINARIES.
Change-Id: I0d3a1bc302760c18c8fe3d57c955e2bb3bd8153a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Set the default location strings to point to the 3rdparty/amd_blobs
files.
Change-Id: I5426b8de2501ba55843efc1cda4b03bc3768f8cb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
According to the POSIX standard, %p is supposed to print a pointer "as
if by %#x", meaning the "0x" prefix should automatically be prepended.
All other implementations out there (glibc, Linux, even libpayload) do
this, so we should make coreboot match. This patch changes vtxprintf()
accordingly and removes any explicit instances of "0x%p" from existing
format strings.
How to handle zero padding is less clear: the official POSIX definition
above technically says there should be no automatic zero padding, but in
practice most other implementations seem to do it and I assume most
programmers would prefer it. The way chosen here is to always zero-pad
to 32 bits, even on a 64-bit system. The rationale for this is that even
on 64-bit systems, coreboot always avoids using any memory above 4GB for
itself, so in practice all pointers should fit in that range and padding
everything to 64 bits would just hurt readability. Padding it this way
also helps pointers that do exceed 4GB (e.g. prints from MMU config on
some arm64 systems) stand out better from the others.
Change-Id: I0171b52f7288abb40e3fc3c8b874aee14b9bdcd6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
|
|
Include soc common lpss header file to resolve build error due to
missing soc_lpss_controllers_list declaration.
Also remove console header since it is unused.
Change-Id: I2b2c82fc7592120993bc483d3061803cf75c7335
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37556
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add soc_pmc_etr_addr function definition in tigerlake SOC code.
The function is declared in common soc intel pmc driver.
Change-Id: Icc471b16304c72a9341abdd9797ba3f8d0d3d1bc
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37555
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I25463f1b7b5d8242da3decf3e7a7ca54c699d467
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37554
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Jasperlake SA and PCH IDs
Change-Id: I2c9ec1ee4236184b986d99250f263172c80f7117
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Add common function to enable PCI MMCONF base address. Use the common
function in stoneyridge bootblock.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I1bb8b22b282584c421a9fffa3322b2a8e406d037
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ifdb9943e6362b7f29c2079759ea09d7b3a940993
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37608
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The name for the CoffeeLake FSP.fd was changed to Fsp.fd.
Therefore the CoffeLake / WhiskeyLake default path was
changed.
Change-Id: I0f51e378fcaacb25392d8940a342fc968c730157
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37564
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch simplifies some GPIO macros by removing redundant code.
Also, for the sake of completeness, add two missing macros.
Change-Id: I838efe8b26f60d3e059f4ce18c116aefbc0b0400
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
On embedded boards the cpu mounted on the board is known. So it is not
required to include microcode for all possible Sky Lake and Kaby Lake
cpus. This patch provides the possibility to only support the versions
required.
By default all microcode updates will be included and the versions not
required can be removed using Kconfig.
BUG=N/A
TEST=build
Change-Id: Iaa36c2846b2279a2eb2b61e6c97d6c89d0736f55
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
TEST=Set MAX_CPUS=2 and run qemu with -smp 2
Signed-off-by: Philipp Hug <philipp@hug.cx>
Change-Id: I94fb25fad103e3cb5db676eb4caead11d54ae0ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Xiang Wang <merle@hardenedlinux.org>
|
|
Definitions were moved so that now device/mmio.h needs to be included
instead of arch/mmio.h. Also, don't use le32 conversion.
This follows the activities of commit 55009af42 (Change all
clrsetbits_leXX() to clrsetbitsXX()) and commit 1c371572188 (mmio: Add
clrsetbitsXX() API in place of updateX()).
Change-Id: Ie3af0d4f0b3331fe5572fc56915952547b512db7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37534
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes the weakly linked function to configure the SPI lockdown.
Change-Id: I1e7be41a9470b37ad954d3120a67fc4d93633113
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36007
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This includes USB QUSB2,QMP Phy and Controller support
And libpayload support for USB
Change-Id: I0651fc28dc227efbeb23eeefe9b96a3b940ae995
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/25210/85
Change-Id: I1cd552fbf03b5135e5911f1143f8778cad81e360
Signed-off-by: Ashwin Kumar <ashk@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This implements the SPI-NOR driver for the Qualcomm QSPI core.
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/27483/58
Change-Id: I2eb8cf90aa4559541ba293b3fd2870896bed20b7
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35501
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for clock driver for SC7180
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/31083/6
Change-Id: I3f39252c887c36e8af43bc49289795000e4638d8
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch changes all existing instances of clrsetbits_leXX() to the
new endian-independent clrsetbitsXX(), after double-checking that
they're all in SoC-specific code operating on CPU registers and not
actually trying to make an endian conversion.
This patch was created by running
sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g'
across the codebase and cleaning up formatting a bit.
Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Move the stoneyridge implementation of get/set AP entry to the common
block.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9c73940ffe5f735dcd844911361355c384f617b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
All AMD CPU families supported in coreboot have BIOSRAM space. Looking at
the source code, every family could have the same API to save and restore
cbmem top or UMA base and size.
Unify BIOSRAM layout and add implementation for cbmem top and UMA storing.
Also replace the existing implementation of cbmem top and UMA with the
BIOSRAM access.
TEST=boot PC Engines apu1 and apu2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I69a03e4f01d7fb2ffc9f8b5af73d7e4e7ec027da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37402
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to BKDGs for families 15h 60-6fh or newer and families 16h the
ACPI MMIO decode enable bit is the second LSB, not the first LSB.
Additionally create another enable function for older families where
the register and bit is different.
It does not seem to impact any current board, but may be crucial for
incoming C bootblock implementations when this bit will need to be set
very early. Most likely this bit is set by AGESA right now.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iaa31abc3dbdf77d8513fa83c7415b9a1b7fd266f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37178
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I17dc2fed6c6518daf5af286788c98c049088911e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch performs below operations:
1. Rename soc_fill_gpio_pm_configuration to soc_gpio_pm_configuration
2. Move soc_gpio_pm_configuration() to gpio_common.c
3. Calling from bootblock and after FSP-S to ensure GPIO PM configuration
is updated with devicetree.cb value even with platform reset.
BUG=b:144002424
TEST=coreboot configures all MISCCFG.bit 0-5 local clock gating based on devicetree.cb
Change-Id: I54061d556d62462d9012bc47bb9f3604a3e5a250
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove default path/to/file strings when USE_AMD_BLOBS is not enabled.
This will result in a buildable, but not runable image, in the default
configuration.
Drop the check for HAVE_MERLINFALCON_BINARIES in the path default.
A later patch will address the poor use of this symbol
All PSP blobs are still assumed to be in the same directory as the AMD
public key. Qualify building the amdfw.rom intermediate image and
including it into coreboot.rom on whether the public key remains "".
This change infers it's OK to skip xHCI and GEC firmware too, although
the images normally reside in a separate directory.
This change only determines whether default paths and names exist.
Paths will be updated in a follow-on patch.
Change-Id: Ic21fbd7a58b340a9bcaaea456e1f38b567215b81
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37220
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iab0a442e6dbde0f9abdf2d8689f9891b79a2d37a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I4ec9d7d3af1c4d7713ec5dfe516b24d110303ff1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add gfx.asl file for cannonlake SOCs to allow for graphics-related ACPI
devices and methods on cannonlake devices.
BUG=b:142237145
TEST=gfx.asl added to drallion dsdt.asl
Change-Id: I38a26f3135d571e2f9b63840d38fd4d3476fc142
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This change allows for Intel graphics devices to use drivers/generic/gfx
driver to populate ACPI SSDT table for common graphics related devices
and methods.
BUG=b:142237145
TEST=On sarien_cml add generic/gfx to the devicetree and device is
enumerated and correct SSDT ASL is observed.
Change-Id: Ibc86a88687ac860ebef19a4b68af64fd50d12b8e
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Change-Id: I9b2cc1bb58922d9e32202ea4c20b9aacfe308bad
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The overhead of pushing variables to stack exceeded the number
of instructions the actual MMIO operation took and the build of
google/aleena with inlined accessors turned out to be just
slightly (<2 KiB) smaller for the entire romstage or ramstage.
Simple read-modify-write MMIO cycles should optimise better now.
IO cycles with index/data register are borderline, at
first sight assembly looked better by not inlining them.
Change-Id: If2c37c9886a0151183aa6dd80eb068d6c67b3848
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change MicrocodeRegionLength to MicrocodeRegionSize as per
coffeelake FsptUpd.h.
TEST= Build with CONFIG_USE_CANNONLAKE_FSP_CAR selected and boot test on
coffeelake RVP.
Change-Id: Iebbf5c34e289870a4d7abdd49fd81e4db236051a
Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37265
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|