summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2019-08-21soc/intel/common/smm: Add missing printk statementTim Wawrzynczak
SMI trap handler was missing a printk statement, which caused Coverity to flag "data &= mask;" as a redundant operation. Change-Id: I71da74e5e08e7d7e6d61c1925db19324efd73f0a Found-by: Coverity CID 1381621 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-08-21vboot: update vboot2 functions to use new vb2_error_tJoel Kitching
To make explicit when vboot2 error codes should be returned, use the new vb2_error_t type on all functions which return VB2_ERROR_* constants. Additionally, add required vboot submodule commit id e6700f4c: 2019-07-31 14:12:30 +0800 - (vboot: update vboot2 functions to use new vb2_error_t) NOTE: This patch was merged separately on the Chromium tree: https://chromium-review.googlesource.com/c/1728499 BUG=b:124141368, chromium:988410 TEST=make clean && make test-abuild BRANCH=none Change-Id: I804c2b407e496d0c8eb9833be629b7c40118415c Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:1728292 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21soc/intel/common: use PAD_BUF() inside PAD_CFG_* macrosMaxim Polyakov
Use PAD_BUF() to disable the input/output buffer inside PAD_CFG_* macros instead PAD_CFG0_RX_DISABLE/PAD_CFG0_TX_DISABLE [1] https://review.coreboot.org/c/coreboot/+/34337 Change-Id: I19fd993e1f60d80eab0ce51eaed5e74ce1c6a34d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-21soc/intel/common: gpio_defs: set trig to disable in PAD_NCMaxim Polyakov
There is no need to change the default value for the RX Level/Edge Configuration parameter if the pad is not used/connected (PAD_NC) Change-Id: Ie7eee83fba9320d52240166371fe0c757dbdce49 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-21soc/intel/common: Set controller state to active in uart initUsha P
Set the controller state to D0 during the uart init sequence, this ensures the controller is up and active. One more argument "const struct device *dev" has been added to uart_lpss_init function. BUG=b:135941367 TEST=Verify no timeouts seen during UART controller enumeration sequence in CML, ICL and APL platforms Change-Id: Ie91b502a38d1a40a3dea3711b015b7a5b7ede2db Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34810 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21mediatek/mt8183: Enlarge PRERAM_CBFS_CACHE regionTristan Shieh
Enlarge PRERAM_CBFS_CACHE region from (16K - 4) to (48K - 4) bytes to decompress and load more data from CBFS in romstage. BUG=b:134351649 BRANCH=none TEST=emerge-kukui coreboot Change-Id: Idc23a67c886718e910ca3c50468e5793f19c8d66 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34896 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21mediatek/mt8183: Overlap decompressor, verstage and romstageTristan Shieh
Since SRAM space is too small to fit all needed features, enable VBOOT_RETURN_FROM_VERSTAGE and overlap decompressor, verstage and romstage to gain more space. BUG=b:134351649 BRANCH=none TEST=emerge-kukui coreboot Change-Id: Ibe336cf93b01fa2ea57b4c2e0a89685424878c91 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34871 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21mediatek: Use GPIO based SPI CSYu-Ping Wu
Some boards (e.g., Kukui) need GPIO based CS for SPI0. This patch changes the pinmux and binds the pins to the correponding SPIs. When using GPIO based SPI CS, we need to manually make CS log/high before/after SPI transactions. BUG=b:132311067 BRANCH=none TEST=Verified that b/132311067 is irreproducible Change-Id: I61653fb19242b6ee6be9a45545a8b66e5c9c7cad Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21intel/fsp1_0,baytrail,rangeley: Tidy up use of preprocessorKyösti Mälkki
Remove cases of __PRE_RAM__ and other preprocessor guards. Change-Id: Id295227df344fb209d7d5fd12e82aa450198bbb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34928 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20soc/intel/cnl: Add provision to configure SD controller write protect pinAamir Bohra
Cometlake FSP allows provison to configure SD controller WP pin, As some of board design might choose not to use the SD WP pin from SD card controller. This implementation adds a config that allows to enable/disable SD controller WP pin configuration from FSP. BUG=b:123907904 Change-Id: Ic1736a2ec4b9370d23a8e3349603eb363e6f59b9 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34900 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20intel/apollolake: Move LPC decode enables to bootblockKyösti Mälkki
Doing this allows to call console_init() earlier in romstage. This also fixes IO UART in bootblock, although it appears there is currently no board that was affected. Change-Id: Iec363a8c651cc1b05b24229db09d686938118f3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34969 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20src: Remove variable length arraysJacob Garber
Variable length arrays were a feature added in C99 that allows the length of an array to be determined at runtime. Eg. int sum(size_t n) { int arr[n]; ... } This adds a small amount of runtime overhead, but is also very dangerous, since it allows use of an unlimited amount of stack memory, potentially leading to stack overflow. This is only worsened in coreboot, which often has very little stack space to begin with. Citing concerns like this, all instances of VLA's were recently removed from the Linux kernel. In the immortal words of Linus Torvalds [0], AND USING VLA'S IS ACTIVELY STUPID! It generates much more code, and much _slower_ code (and more fragile code), than just using a fixed key size would have done. [...] Anyway, some of these are definitely easy to just fix, and using VLA's is actively bad not just for security worries, but simply because VLA's are a really horribly bad idea in general in the kernel. This patch follows suit and zaps all VLA's in coreboot. Some of the existing VLA's are accidental ones, and all but one can be replaced with small fixed-size buffers. The single tricky exception is in the SPI controller interface, which will require a rewrite of old drivers to remove [1]. [0] https://lkml.org/lkml/2018/3/7/621 [1] https://ticket.coreboot.org/issues/217 Change-Id: I7d9d1ddadbf1cee5f695165bbe3f0effb7bd32b9 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-20soc/intel/skylake/vr_config: Add loadline defaultsPatrick Rudolph
In addition to zero IccMax specified by mainboard with socketed CPU, allow a zero LoadLine default. The SoC code will fill in the default AC/DC LoadLine values are per datasheets: * "7th Generation Intel® Processor Families for H Platforms, Vol 1" Document Number: 335190-003 * "7th Generation Intel® Processor Families for S Platforms and Intel ®Core™ X-Series Processor Family, Vol 1" Document Number: 335195-003 The AC/DC LoadLine is CPU and board specific. TODO: Find out how to get the LoadLine from vendor firmware and find out how to map those to different CPU LoadLines. Change-Id: I849845ced094697e8700470b4af95ad0afb98e3e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34938 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20soc/intel/skylake/vr_config: Add support for KBL-H and KBL-SPatrick Rudolph
Datasheets used: * "7th Generation Intel® Processor Families for H Platforms, Vol 1" Document Number: 335190-003 * "7th Generation Intel® Processor Families for S Platforms and Intel ®Core™ X-Series Processor Family, Vol 1" Document Number: 335195-003 This allows mainboards to specify a zero IccMax, which all mainboards with socketed CPU should do. Change-Id: I303c5dc8ed03e9a98a834a2acfb400022dfc2fde Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34937 Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20soc/intel/skylake/vr_config: Get rid of static lookup tablePatrick Rudolph
Use a switch case to find the correct VR config. The following commit will add more entries for which a lookup table isn't the best solution. Change-Id: Ib11c3d6e1eb339a0c7358c312a32731d835e7c73 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2019-08-20soc/intel/skylake/vr_config: Get rid of definesPatrick Rudolph
Get rid of defines and hardcode values directly. Just a cosmetic cleanup to make it more readable. Change-Id: I3eec44b38af356c3d87235740c65e2c2f6fc5876 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-08-20devicetree: Remove duplicate chip_ops declarationsKyösti Mälkki
These are only referenced inside auto-generated static.c files, and util/sconfig also generates the declarations automatically from source file pathnames. Change-Id: Id324790755095c36fbeb73a4d8f9d01cdf6409cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34979 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20arch/non-x86: Remove use of __PRE_RAM__Kyösti Mälkki
Change-Id: Id8918f40572497b068509b5d5a490de0435ad50b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-18cpu/intel: Enter romstage without BISTKyösti Mälkki
When entry to romstage is via cpu/intel/car/romstage.c BIST has not been passed down the path for sometime. Change-Id: I345975c53014902269cee21fc393331d33a84dce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-16soc/intel/cannonlake: Add 4E/4F to early io initChristian Walter
This is needed for the AST2500 to work, because it uses 4E/4F. Change-Id: Ie47474e9bf1edfe98555a148469c41283e9a4ea6 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-08-16soc/intel/cannonlake: Add more PCI Ids for CoffeelakeChristian Walter
Change-Id: I92e2adb32d19ff49bdef353e1f191c4960ce0d18 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2019-08-16soc/intel/common/dptf: Add support for mode-aware DPTFPhilip Chen
This change ports some previous work for Skylake: cb58683ef5 soc/intel/skylake: Add support for mode-aware DPTF ...to common DPTF code so that we can support mode-aware DPTF for other Intel platforms. BUG=b:138702459 BRANCH=none TEST=Manually test on hatch: (1)Add DPTF_TSR0_TABLET_PASSIVE and DPTF_TSR1_TABLET_PASSIVE to hatch baseboard dptf.asl (2)Flash custom EC FW code which updates DPTF profile number when entering/exiting tablet mode (3)On DUT, see /sys/class/thermal/thermal_zone2/trip_point_{1,2}_temp updated when device mode is switched (tablet/clamshell) Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I5e7b97d23b8567c96a7d60f7a434e98dd9c69544 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34785 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-16amd/picasso: Unify SMM relocationKyösti Mälkki
Change-Id: I62104894b5a956523f509d88d49e45a0bd1c587d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34749 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-16amd/stoneyridge: Unify SMM relocationKyösti Mälkki
Change-Id: I02ad07e049cb74ccb52ba3d41eb16c58a2cfb38b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34748 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-16amd/stoneyridge: Rename ramtop.c to memmap.cKyösti Mälkki
Use a name consistent with the more recent soc/intel. Change-Id: I4d67a7c3107758c81a67e1668875767beccfcdb0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-08-16amd/picasso: Rename ramtop.c to memmap.cKyösti Mälkki
Use a name consistent with the more recent soc/intel. Change-Id: I491e609bed00dc79c628b321c74ad7f4cc31b5fe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-08-16soc/amd/common: Refactor S3 helpersKyösti Mälkki
Make the prototypes match what drivers/amd/agesa would rather see, in preparation to use the same code with open-source AGESA. Change-Id: I1506ee2f7ecf3cb6ec4cce37a030c05f78ec6d59 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-15intel/smm: Define struct ied_header just onceKyösti Mälkki
Change-Id: I6fc083aa30d05c11c1b6db7b3facacf5ae857c92 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-15soc/intel: Rename some SMM support functionsKyösti Mälkki
Rename southbridge_smm_X to smm_southbridge_X. Rename most southcluster_smm_X to smm_southbridge_X. Change-Id: I4f6f9207ba32cf51d75b9ca9230e38310a33a311 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34856 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15soc/*: mp_run_on_all_cpus: Remove configurable timeoutPatrick Rudolph
Some timeouts given were too small when serial console is enabled due to its spinlock making code runtime worse with every AP present. In addition we usually don't know how long specific code runs and how long ago it was sent to the APs. Remove the timeout argument from mp_run_on_all_cpus and instead wait up to 1 second, to prevent possible crashing of secondary APs still processing the old job. Tested on Supermicro X11SSH-TF. Change-Id: I456be647b159f7a2ea7d94986a24424e56dcc8c4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-08-15intel/ice,sky,cannon: Drop unused EMRR and UNCORE_EMRR codeKyösti Mälkki
There was no code present to call wrmsr with the data we prepared in the structs. The MSRS are already set up by FSP, just reference with the more recent names of PRMRR and UNCORE_PRMRR. Change-Id: Ib49e7af52e1170a1304975ff0ae63f99e106dffe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-15soc/intel: Drop spurious includesKyösti Mälkki
Change-Id: I2fff107e38abdd34f2d80d4d258be4c429d371e7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-15cpu/x86/smm: Promote smm_memory_map()Kyösti Mälkki
Change-Id: I909e9b5fead317928d3513a677cfab25e3c42f64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15arch/x86: Add postcar_frame_common_mtrrs()Kyösti Mälkki
As most platforms will share the subset of enabling both low RAM WB and high ROM WP MTRRs, provide them with a single function. Add possibility for the platform to skip these if required. Change-Id: Id1f8b7682035e654231f6133a42909a36e3e15a1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34809 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15cpu/intel: Refactor platform_enter_postcar()Kyösti Mälkki
There are benefits in placing the postcar_frame structure in .bss and returning control to romstage_main(). Change-Id: I0418a2abc74f749203c587b2763c5f8a5960e4f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-15intel/denverton_ns: Drop unused save_gpio_routeKyösti Mälkki
Change-Id: I58131d77ba23024cd23e38584f8062d330d2564f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian
2019-08-15mainboard/google: Fix indirect includesKyösti Mälkki
Change-Id: Ie79702efab519b16cff45ccad61b95e7d8c2fbac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34854 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15cpu/x86/smm: Define single smm_subregion()Kyösti Mälkki
At the moment we only have two splitting of TSEG, one with and one without IED. They can all use same implementation. Make configuration problems of TSEG region assertion failures. Rename file from stage_cache.c to tseg_region.c to reflect it's purpose. Change-Id: I9daf0dec8fbaaa1f4e6004ea034869f43412d7d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34776 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Guckian Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15soc/mediatek: Change DSI init commands to take flexible length arrayHung-Te Lin
The fixed size of init command in lcm_init_table is wasting lots of space and we should change to packed array since the command buffer already provides length information. With this change, BOE panel init commands have been reduced from 4848 bytes to 1309 bytes. BUG=b:80501386,b:117254947 TEST=emerge-kukui coreboot chromeos-bootimage; Boots properly Change-Id: I359dde8e6f2e1c0983f4677193bb47a7ae497ca6 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34778 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15soc/mediatek/mt8183: Add DSI driverHung-Te Lin
The MT8183 display serial interface (DSI) is based on MIPI Alliance Specification, supporting high-speed serial data transfer between host processor and peripheral devices such as display modules. DSI supports both video mode and command mode data transfer defined in MIPI spec, and it also provides bidirectional transmission with low-power mode to receive messages from the peripheral. Reference: MT8183 Application Processor Functional Spec, 6.7 Display Serial Interface (DSI) BUG=b:80501386,b:117254947 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ic413f524ca0b36f0b01f723a71fe9745e2710cd2 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-15soc/mediatek: dsi: Support sending MIPI init commandsHung-Te Lin
For systems with real MIPI panels (8173/oak was using PS8640 eDP bridge), we have to send DCS commands to initialize panel. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: Ie7c824873465ac82a95bcb0ed67b8b9866987008 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34773 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15soc/mediatek: dsi: Refactor video timing calculationHung-Te Lin
The video timing should be based on PHY timing. Some values can be ignored on 8173 because of fixed values in PHY but should be calculated for newer platforms like 8183. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: Id3ad2edc08787414a74188f5050460e98222caf4 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-14soc/mediatek: dsi: Refactor PHY timing calculationHung-Te Lin
The PHY timing should be calculated by data rate (Mbps). However for 8173 some values were hard-coded so we want to introduce a new mtk_phy_timing structure and a weak function mtk_dsi_override_phy_timing that allows per-SOC customization to apply PHY timings. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: I1176ca06dda026029ff431aca7f9e21479eed670 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-14soc/intel/fsp_broadwell_de: Populate SMBIOS tables with memory informationAndrey Petrov
Add code to read SPD data, parse it and save into SMBIOS table. This is implemented for socketed DDR4 chips only. For soldered-down memory this is not implemented and probably won't be ever needed. TEST=tested on OCP Monolake mainboard, and found dmidecode -t memory to work. The stack has also been tested on an out-of-tree board. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I1162eb4484dab46f1ab9fe3426eecc4d9378e8e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-08-14soc/fsp_broadwell_de: Implement SMBus read/write over IMCAndrey Petrov
Add read/write functions to hook it up with existing SPD retrieval code. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I9f5993dc795badf72751a4e6c9d974119a653e30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34679 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-14common/block/imc: Add Integrated Memory Controller (IMC) driverAndrey Petrov
IMC is found on certain Xeon processors. On such platforms SPDs are not connected to SMBus on PCH but to dedicated IMC-owned pins. The purpose of this driver is to expose access to the i2c/smbus controller associated with IMC. Datasheet used: Intel Xeon Processor D-1500 Product Family, Volume 2, reference 332051-001 This driver is largely based on i2c-imc.c Linux driver. https://lwn.net/Articles/685475/ TEST=single/double reads and single writes on Xeon-D1500. Hardware: Open Compute Project Monolake platform. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: Idbcda1c2273b9a5721fcd9470b4de182192779e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34678 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-13soc/intel/fsp_broadwell_de: Enable early integrated UARTAndrey Petrov
In order to use internal UART it needs to 'enabled'. This is normally done by FSP. However sometimes internal UART is needed before FSP is invoked. TEST=check if printk() show up in early romstage. Tested on OCP Monolake. Tested on out-of-tree mainboard to see if UART on LPC still works. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I88a7b1a38abf9a09137f6dd75a5a9dee104daaca Reviewed-on: https://review.coreboot.org/c/coreboot/+/34683 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-13cpu/x86: Move some SMM function declarationsKyösti Mälkki
Change-Id: I9a4e57f8fd032f2824eab0e5b59d635710e3e24b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-13cpu/x86: Separate save_state struct headersKyösti Mälkki
Any platform should need just one of these. Change-Id: Ia0ff8eff152cbd3d82e8b372ec662d3737078d35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34820 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-13soc/mediatek: dsi: Refactor MIPI TX configurationHung-Te Lin
The only platform-specific difference in mtk_dsi_phy_clk_setting is how to configure MIPI TX because those registers (and logic) are quite different across different SOCs. The calculation of data rate is actually the same so we should isolate it and move to common, and rename mtk_dsi_phy_clk_setting to a better name as mtk_dsi_configure_mipi_tx. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: I894dc2c4c053267debf5a58313b2bb489bcf5f3a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-13soc/mediatek: dsi: Unify format to bpp conversionHung-Te Lin
The 'bpp' was referred to both 'bits per pixel' and 'bytes per pixel' in MTK DSI driver and should be corrected. By this change we now always consider 'bpp' as 'bits per pixel', and rename the variables for other cases. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: Ibd405220b73859e5592c68f498af07eef8d7edbc Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34770 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-13soc/mediatek: Create common DSI driver from mt8173Hung-Te Lin
The DSI initialization is almost the same for 8173 and 8183, so we want to move most of common functions into common/dsi.c. The major board-specific functions left are: - reset (controller register has different format) - pin_drv_ctrl (8183 does not need this) BUG=b:80501386,b:117254947 TEST=make -j # board=oak (mt8173) Change-Id: I8d4369a3c84db551287a9c9d1b22f552c5f7518d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34769 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-12soc/sifive/fu540: add code for spi and map flash to memory spacesXiang Wang
SiFive's ZSBL has initialized flash, but only 16MB of space is available. 1. add code for spi 2. add code to map flash to memory spaces Change-Id: I106688c65ac7dd70be7479dc4691797b700682d9 Signed-off-by: Xiang Wang <merle@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-08-12soc/intel/common: Fix typo mistake in cache_as_ram.SSubrata Banik
Change-Id: I14c0e87012bdbaaff50844ed097b66e2221b1e08 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-08-11arch/x86: Flip option NO_CAR_GLOBAL_MIGRATIONKyösti Mälkki
It is easier to track CAR_GLOBAL_MIGRATION which is the approach to be deprecated with the next release. This change enforces new policy; POSTCAR_STAGE=y is not allowed together with CAR_GLOBAL_MIGRATION=y. Change-Id: I0dbad6a14e68bf566ac0f151dc8ea259e5ae2250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-11arch/x86: Enable POSTCAR_CONSOLE by defaultKyösti Mälkki
Almost all platforms force it on. Make it enabled by default but under user control to optionally disable it. Change-Id: I6b0f19c8bfd6ffed93023d57a1d28ca6acc06835 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-10src: Include <stdint.h> instead of <inttypes.h>Jacob Garber
The <inttypes.h> header currently does nothing but include the definitions from <stdint.h>, so let's #include that directly instead. Change-Id: I9d83ad37d0d7300a093001596ce3f0b3830c5701 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-08-09soc/amd/picasso: Update i2c supportMarshall Dawson
Change the stoneyridge definitions into picasso. The named 0 and 1 buses are controlled by the PSP and not directly accessible by host firmware. I2C4 operates only in slave mode so is not added to to the bus clear-after-reset sequence. The I2C controller is fundamentally the same as on Stoney Ridge so the ability to clear a potentially jammed bus is still required. Program Picasso's new pad control registers in the MISC AcpiMmio space according to the recommended settings. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ibbc5504ebc36654e28c79fe3ae17cc0d9255118f Reviewed-on: https://review.coreboot.org/c/coreboot/+/33763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-09soc/amd/picasso: Update CPU supportMarshall Dawson
Change the Stoney Ridge ID to Picasso. Rename family 15h. Get the number of cores/threads from CPUID as all D18 registers are new. Change-Id: I44c45db637897f6caf320032c9f79a3a1ab4d6c9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-09soc/amd/picasso: Reduce 48M out configurationMarshall Dawson
Picasso has only a single 48M output. Simplify the setup function. Note that while the feature is similar to older products, the register definition and Enable bit has changed. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Iebaf5219fdcd3145a4faf906f656a7fbdc7e0c36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-09soc/amd/picasso: Remove IOAPIC2Marshall Dawson
Remove the Family 15h device. It's not in Family 17h documentation and isn't detectable with HDT. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ifa9c06f78f39a3ec3b555d4ecc542172cd44a0b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33990 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09soc/amd/picasso: Update SMI sourcesMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I42bb0edb6fa2c6fa92829ef5d3623483aa448a5c Reviewed-on: https://review.coreboot.org/c/coreboot/+/33771 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09soc/amd/picasso: Update machine check supportMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Iae48a0c3fb2abf2aa3fb78af8d50431c8533f76f Reviewed-on: https://review.coreboot.org/c/coreboot/+/33769 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09src/amd/picasso: Update reset codeMarshall Dawson
Remove the scratch register indicators. Per AMD, AGESA no longer uses these. Use a new IO register to determine whether a warm reset should occur. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I0ff7935004b3d1ac5204d3ef575cfa98116a57fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/33989 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09soc/amd/common: Add new GPIO 8K pull-up definitionMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: If24bed8b3f10d945b9988445025409c8420dd07a Reviewed-on: https://review.coreboot.org/c/coreboot/+/33762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-09src/soc/amd/picasso: Update GPIO configurationMarshall Dawson
Make the definitions match Picasso's definitions. Add/remove pins that differ from stoneyridge, update GEVENTs for the FCH mapping. Change-Id: I59f958151f27ed4ca0eb1a87ade6102eec1e5061 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-09cpu/x86/smm: Drop SMI handler address from structKyösti Mälkki
Change-Id: Ib925b11ba269e0f3a9a0a7550705bf2a6794c5b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-09amd/stoneyridge,picasso: Open TSEG earlierKyösti Mälkki
Don't make assumptions about which subregion will be accessed first. Change-Id: I558fa4acc5068014b3748be6fc1bc34999054c0a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34775 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09soc/intel/common: Set power-failure-state via option tableNico Huber
Allow get_option() to override the Kconfig choice. Change-Id: Ie91b502a38d1a40a3dea3711b017b7a5b7edd2db Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09soc/intel: Drop pmc_soc_restore_power_failure()Nico Huber
Get rid of this function and its dangerous, weak implementation. Instead, call pmc_set_power_failure_state() directly from the SMI handler. Change-Id: I0718afc5db66447c93289643f9097a4257b10934 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09soc/intel/apl: Implement power-failure-state APINico Huber
Needed some Makefile changes to be able to compile for SMM. Change-Id: Ibf218b90088a45349c54f4b881e895bb852e88bb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09soc/intel/{cnl,icl}: Use new power-failure-state APINico Huber
pmc_soc_restore_power_failure() is only called from SMM, so add `pmc.c` to the `smm` class. Once all platforms moved to the new API, it can be implemented in a central place, avoiding the weak- function trap. Change-Id: Ib13eac00002232d4377f683ad92b04a0907529f3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34726 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09soc/intel/skylake: Use new power-failure-state APINico Huber
Also move pmc_soc_restore_power_failure() which was guarded twice to not be included in SMM, where the only call lives. Once all platforms moved to the new API, it can be implemented in a central place, avoi- ding the weak-function trap. Change-Id: Ie72753764ecd876e6cb999fa0074d1114ae5efcf Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34725 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09soc/intel/common: Implement power-failure-state handlingNico Huber
This is a consolidation of the respective feature in `soc/intel/*lake/`, including additional support for MAINBOARD_POWER_STATE_PREVIOUS. For the latter, firmware has to keep track of the `previous` state. The feature was already advertised in Kconfig long ago, but not implemented. SoC code has to call pmc_set_power_failure_state() at least once during boot and needs to implement pmc_soc_set_afterg3_en() for the actual register write. Change-Id: Ic6970a79d9b95373c2855f4c92232d2aa05963bb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09soc/mediatek/mt8183: Add display controller driverYongqiang Niu
The MT8183 SOC has a DISP (display controller) that supports overlay, read/write DMA, ... etc. The output of DISP goes to display interface DSI, DPI or DBI directly. Reference: MT8183 Application Processor Functional Spec, 6.1 Display Controller BUG=b:80501386,b:117254947 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ic4aecc58d081f14f5d136b9ff8e813e6f40f78eb Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-09soc/mediatek/mt8173: Refactor display driver to share common partsHung-Te Lin
Move those will be shared by other MTK SOCs (for example, MT8183) to common/ddp.c. BUG=b:80501386,b:117254947 BRANCH=none TEST=Boots correctly on Oak Change-Id: Ie5709ab6e263caa21fdf7e799dc2ee884ffaf800 Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-09soc/mediatek/mt8173: Remove dual DSI modeHung-Te Lin
The 'dual DSI mode' was never used by any real boards running coreboot and is introducing lots of complexity when it comes to refactoring. In order to create a common display stack for MTK SOCs, we want to first drop dual DSI mode so 8173 and 8183 DSI/DDP implementation will be more similar to each other. BUG=b:80501386,b:117254947 TEST=emerge-oak coreboot Change-Id: I357c30cc687803ca8045d0b055dec2e22eef4291 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34693 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09soc/nvidia/tegra210: Fix potential NULL pointer dereferenceTim Wawrzynczak
Recent Coverity scan indicated potential NULL deference; if either spi->dma_in or spi->dma_out are NULL, the fifo_error() check could dereference a NULL pointer. Also fixed what appears to be a logic bug for the spi->dma_out case, where it was using the todo (count) from spi->dma_in. Found-by: Coverity CID 1241838, 1241854 Change-Id: Icd1412f0956c0a4a75266d1873d5e9848aceee32 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34787 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-09soc/intel/common/gspi: Use GSPI bus id to map to the controllerKarthikeyan Ramasubramanian
Currently SPI bus id is used to map to the controller in order to set the controller state. In certain platforms SPI bus id might not be exactly the same as GSPI bus id. For example, in Intel platforms SPI bus id 0 maps to fast spi i.e. SPI going to the flash and SPI bus id 1 .. n map to GSPI bus id 0 .. n-1. Hence using SPI bus id leads to mapping to the GSPI controller that is not enabled. Use the GSPI id bus so that the right controller is set to active state. This fixes the regression introduced by CB:34449 BUG=b:135941367 TEST=Boot to ChromeOS. Change-Id: I792ab1fa6529f5317218896ad05321f8f17cedcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-08-08soc/intel/{APL, BSW, SKL}: Remove unused CPU_ADDR_BITS kconfigSubrata Banik
This patch removes CONFIG_CPU_ADDR_BITS kconfig from soc/intel/<soc>/Kconfig as not getting used anymore. Change-Id: Ie7fa386c9c0aae19da1fbd09407494d9812247a4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34768 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08soc/intel: Fix SMRAM base MSRKyösti Mälkki
Previous setting was correct but assumed SMI handler is always located at the beginning of TSEG. Break the assumption. Change-Id: I5da1a36fc95f76fa3225498bbac41b2dd4d1dfec Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34730 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08arch/x86: Handle smm_subregion() failureKyösti Mälkki
The callers don't necessarily check return value of function. Make sure the parameters are not left uninitialised in that case. Change-Id: Ic02db2d35b2ec88506320e7df609940de4aef005 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34708 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08arch/x86: Change smm_subregion() prototypeKyösti Mälkki
Do this to avoid some amount of explicit typecasting that would be required otherwise. Change-Id: I5bc2c3c1dd579f7c6c3d3354c0691e4ba3c778e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-08arch/x86: Move TSEG_STAGE_CACHE implementationKyösti Mälkki
This is declared weak so that platforms that do not have smm_subregion() can provide their own implementation. Change-Id: Ide815b45cbc21a295b8e58434644e82920e84e31 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-08lib/stage_cache: Refactor Kconfig optionsKyösti Mälkki
Add explicit CBMEM_STAGE_CACHE option. Rename CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to TSEG_STAGE_CACHE. Platforms with SMM_TSEG=y always need to implement stage_cache_external_region(). It is allowed to return with a region of size 0 to effectively disable the cache. There are no provisions in Kconfig to degrade from TSEG_STAGE_CACHE to CBMEM_STAGE_CACHE. As a security measure CBMEM_STAGE_CACHE default is changed to disabled. AGESA platforms without TSEG will experience slower S3 resume speed unless they explicitly select the option. Change-Id: Ibbdc701ea85b5a3208ca4e98c428b05b6d4e5340 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-08fsp_baytrail/fsp_broadwell_de: Sort entries in Makefile.inchcl-coreboot
Change-Id: I12e6ec4aec7dcadcbb886c3fc4c3b9126a0a835c Signed-off-by: Sourabh Kashyap <sourabhka@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-08-07soc/amd/picasso: Set HAVE_BOOTBLOCK=nKyösti Mälkki
Change-Id: Iaf370e04adb04eb81555a57e81812ebe3339971d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-08-07intel/braswell: Drop config IED_REGION_SIZEKyösti Mälkki
Platform does not set up IED. Change-Id: Ied72888c6406b59332bc3d68eccb50bf1eab3419 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-07soc/amd: Rename smm_region_info() to smm_region()Kyösti Mälkki
Change-Id: I361fb0e02fd0bd92bb1e13fe84c898a1ac85aa40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34703 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-07intel/apollolake: Replace smm_region_info() with smm_region()Kyösti Mälkki
Implementation remains the same. Change-Id: I8483bb8e5bba66b4854597f58ddcfe59aac17ae0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-07cpu/x86/smm: Promote smm_subregion()Kyösti Mälkki
No need to limit these declarations to FSP. Both PARALLEL_MP_INIT smm_relocate() and TSEG_STAGE_CACHE can be built on top of this. Change-Id: I7b0b9b8c8bee03aabe251c50c47dc42f6596e169 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-07intel/icelake,skylake,cannonlake: Drop unused parameterKyösti Mälkki
Change-Id: I0900c3b893d72063cc8df5d8ac370cf9d54df17a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-07soc/intel: Obsolete mmap_region_granularity()Kyösti Mälkki
Change-Id: I471598d3ce61b70e35adba3bd983f5d823ba3816 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-07mediatek/mt8183: Add I2C driver codeQii Wang
This patch implements i2c driver for MT8183. BUG=b:80501386 BRANCH=none TEST=Boot correctly on kukui. Change-Id: I0a4d78b494819f45951f78e5a618021000cf3463 Signed-off-by: Qii Wang <qii.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30976 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-06tegra210: Increase size of verstage due to overflowChristian Walter
When imlpementing changes in VBOOT, within the build process, tegra210 overflows into the romstage. Reduce the size of romstage from 104 to 100 and increase the size from verstage from 66 to 70. Change-Id: Ie00498838a644a6f92881db85833dd0a94b87f53 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34640 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-06soc/*: Report mp_init errorsPatrick Rudolph
* Increase log level from ERR to CRITICAL in run_ap_work(). * Print or return errors if mp_run_on_all_cpus() failed. Tested on Supermicro X11SSH-TF. Change-Id: I740505e3b6a46ebb3311d0e6b9669e7f929f9ab9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-05soc/intel/{cnl,icl}: Add support to get LPSS controllers list from SOCAamir Bohra
This implementation adds support to provide list of LPSS controllers for a canonlake and icelake platforms. It implements strong function of get_soc_lpss_controllers defined under intel common block lpss driver. Change-Id: I36c87e2324caf8ed3e4bb3e3dc6f5d4edf3e8d46 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-08-05soc/intel/common/lpss: Add function to check for a LPSS controllerAamir Bohra
Add an API to check if device is a LPSS controller. This API can be used for IRQ assignments for LPSS PCI controllers, since the LPSS controllers have a requirement of unique IRQ assignments and do not share same IRQ# with other LPSS controllers. SOC code is reponsible to provide list of the LPSS controllers supported and needs to implement soc_lpss_controllers_list API, in case it needs to use this common implementation. Change-Id: I3f5bb268fc581280bb1b87b6b175a0299a24a44a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34137 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-05soc/intel/cnl/graphics: Hook up libgfxinitNico Huber
Change-Id: Ic038adad6cf76867cd4a8626d4c49e17018389fd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-05soc/sifive/fu540: Add opensbi supportPatrick Rudolph
Tested on SiFive/unleashed: Boots into Linux until earlycon terminates. Change-Id: I35abacc16f244b95f9fd1947d1a5ea10c4dee097 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34142 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 22:19:49 +0000