summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2018-09-21soc/intel/cannonlake: Correct ITSS port id.praveen hodagatta pranesh
According to cannon lake PCH BIOS specification document #570374 target port id for interrupt and timer subsystem(ITSS) is C4 instead of C2. BUG=None TEST=None Change-Id: I9f8783c682d2c4c4a86e1c9cf4b9c27a18fdf494 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Kin Wai Ng <nelsonaquik@gmail.com>
2018-09-20soc/intel/cannonlake: Remove const for spd_smbus_addressLijian Zhao
Remove const define for spd_smbus_address, the value can be updated depends on platform configuration. TEST=Build and Run on Whiskey Lake rvp platform. Found-by: Converity Scan #1395725 Change-Id: Ib933ed872e9f85087bb3cd76a1f1e29cca75cd54 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28664 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20soc/amd/stoneyridge/romstage.c: Remove obsolete commentRichard Spiegel
When preparing transition of AGESA calls to romstage, I placed a comment indicating the place to move a particular call. Now that the AGESA call has been moved to romstage, the comment became obsolete. BUG=b:116095766 TEST=none. Change-Id: I2811657385ab088747e32d4c66b99fdd01e7315e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-09-20soc/intel/fsp_broadwell_de: Add fixed VT-d MMIO range to the resourcesWerner Zeh
FSP initializes the VT-d feature on Broadwell-DE and assigns an address space to the MMIO range. coreboot's resource allocator needs to be aware of this fixed resource as otherwise the address can be assigned to a different PCI device. In this case addresses are overlapped and the VT-d range is not accessible any more. To deal with it the right way add a fixed MMIO resource to the resources list if VT-d BAR is enabled. TEST=Booted into Linux and checked coreboot log for resource assignment. Change-Id: I626ac17420eadc0b49031e850f0f40b3b221a098 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/28672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-20fsp_broadwell_de: Move DMAR table generation to corresponding VT-d deviceWerner Zeh
The DMAR table generation depends on the VT-d feature which is implemented in its own PCI device located in PCI:00:05.0 for Broadwell-DE. Add a new PCI driver for this device and move DMAR table generation to this device driver. Change-Id: I103257c73f5e745e996a441a2535b885270bc204 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/28671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-19amd/stoneyridge: Sync PSP base to MSRMarshall Dawson
According to AMD, there exists an undocumented MSR which must be written with the PSP's base address. Read the value from the PSP's config space and sync each core's copy of the MSR to match. BUG=b:76167350 TEST=boot Grunt and verify "rdrand: disabled" goes away from dmesg Change-Id: I30027d3b0a6fbd540375e96001beb9c25bf3a678 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28608 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-18soc/intel/common/block: Don't use device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: If2d643eafea854563f56a7f867b7b492b6d09a19 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28631 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-18soc/cavium/cn81xx: Don't use device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ifa54624664c06c606fb4e083bae98b4accc61be0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-09-18cpu/*/car: fix ancient URL explaining XIP range run-time calculationStefan Tauner
Change-Id: I49526b6aafb516a668b7b5e983a0372e3d26a8fc Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-17mb/google/kahlee/variants/baseboard: Set STAPM percentageRichard Spiegel
Default STAPM percentage causes a lot of thermal throttling on grunt. AMD experimented with 80%, it works for grunt. This is initial code to provide easy change path for other grunt based platforms. BUG=b:111608748 TEST=build and boot grunt. Change-Id: I22863f6ed76152bf872fce3e275f8a7fd8077504 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-17soc/intel/broadwell: Add PCH_GPIO_PIRQ_INVERT definitionMatt DeVillier
Add definition for PCH_GPIO_PIRQ_INVERT, which is needed for google/buddy, a to-be-merged variant of google/auron. Taken from Chromium commit 70ee99b [buddy: change trigger type of gpio53] Change-Id: I21448160cee791710df51d06efa32cdfecf38c0f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/28611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-15sifive/hifive-unleashed: enable CBMEM supportPhilipp Hug
Change-Id: I3eacba9c1c20bbfa270dd7a9afabe48ed9092bcc Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28622 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-15soc/sifive: move ram_resource to mainboardPhilipp Hug
ram_resource is board specific and should be moved there. Change-Id: I50bd9aaaae39422e565d8bf205a6365c59299df0 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-09-14soc/intel/denverton_ns: Enable common block PMCJulien Viard de Galbert
Mainly update headers to build. Added option PMC_GLOBAL_RESET_ENABLE_LOCK to remove function configuring the global reset through PMC base. On denverton the global reset lock is not in PMC base but in the PCI registers so this code cannot be shared. Change-Id: I9ace70862cab63f8355252d034292596c7eab1fd Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/25426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Evandro Luiz Hauenstein <kingsumos@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-14soc/sifive/fu540: Implement uart_platform_refclk for UART divisor calculationPhilipp Hug
After changing clock from 33.33Mhz to 1Ghz the UART divisor needs to be recalculated. Return correct tlck frequency in uart_platform_refclk. Change-Id: I2291e4198cf466a8334211c6c46bc3268fc979a9 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-14soc/sifive/fu540: Initialize SDRAMPhilipp Hug
Based on SiFive bootloader code Change-Id: I71043ce9e458e25e64da28d53cd36b02d2e22acc Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28604 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-14soc/sifive/fu540: Switch clock to 1GHz in romstagePhilipp Hug
Invoke clock_init in romstage for SiFive Unleashed. Change-Id: Ib869762d557e8fdf4c83a53698102df116d80389 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-09-14soc/sifive/fu540: create ram_resource with actual memory sizePhilipp Hug
Change-Id: If6af6f679e24e56c79b995de0970d4e6f455e40a Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-09-14arch/riscv: provide a monotonic timerPhilipp Hug
The RISC-V Privileged Architecture specification defines the Machine Time Registers (mtime and mtimecmp) in section 3.1.15. Makes it possible to use the generic udelay. The timer is enabled using RISCV_USE_ARCH_TIMER for the lowrisc, sifive and ucb soc. Change-Id: I5139601226e6f89da69e302a10f2fb56b4b24f38 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/27434 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-14soc/sifive/fu540: add SiFive supplied header files for SDRAM initializationPhilipp Hug
Add original files from SiFive bootloader. Change-Id: I8beb75c070a6fac1700dd7644fc4fe9df226e716 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-09-14complier.h: add __always_inline and use it in code baseAaron Durbin
Add a __always_inline macro that wraps __attribute__((always_inline)) and replace current users with the macro, excluding files under src/vendorcode. Change-Id: Ic57e474c1d2ca7cc0405ac677869f78a28d3e529 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@google.com>
2018-09-13soc/sifive/fu540: Get SDRAM controller out of resetPhilipp Hug
Change-Id: Ifa6faffbaf353379f57e0f80c1c4ca2fc380f874 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-13soc/sifive/fu540: Update clock settings according SiFive bootloaderPhilipp Hug
The documentation unfortunately doesn't match what SiFive uses in their FSBL. Use the same values as in FSBL to make DDR RAM work. Change-Id: I844cc41ed197333adeae495e71ea70b4a9603650 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28582 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-13uart/sifive: make divisor configurablePhilipp Hug
The SiFive UART on the HiFive Unleashed uses the tlclk as input clock which runs at coreclk / 2. The input frequency is configured in the board code depending on the current stage. (bootblock + romstage run at 33.33Mhz, ramstage at 1Ghz) Change-Id: Iaf66723dba3d308f809fde5b05dfc3e43f43bd42 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/27440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-13src/*/intel/: clarify Kconfig options regarding IFDStefan Tauner
HAVE_INTEL_FIRMWARE is used to enable certain options that rely on a valid Inter Flash Descriptor to exist. It does *not* identify platforms or boards that are capable of running in descriptor mode if it's valid. Refine the help text to make this clear. Introduce a new option INTEL_DESCRIPTOR_MODE_CAPABLE that does simply declare that IFD is supported by the platform. Select this value everywhere instead of the HAVE_INTEL_FIRMWARE and default HAVE_INTEL_FIRMWARE to y if INTEL_DESCRIPTOR_MODE_CAPABLE is selected. Move the QEMU Q35 special case (deselection of HAVE_INTEL_FIRMWARE) to the mainboard directory. Change-Id: I4791fce03982bf0443bf0b8e26d9f4f06c6f2060 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-12soc/sifive/fu540: Initialize PLL and clockPhilipp Hug
Change-Id: Iba0669e08940e373aaf42cbba3a1ceffd68a4f52 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/27439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-12soc/amd/stoneyridge: Fix more GPIO functionsJonathan Neuschäfer
Instead of gpio_num, gpio_address should be used as the address in write32. This lets us also get rid of a few casts. Commit c9ed3ee8d8 ("soc/amd/stoneyridge: Fix gpio_set function") fixed one instance of this bug, but it was more widespread. TEST=None Change-Id: I0cf87aac2f1b87b6eac2b506515e48fe908c1f2b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-11amd/stoneyridge: Enable BERT table generationMarshall Dawson
Add a duplicate ACPI_BERT symbol with a 'y' default setting and additional help text. BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system. Change-Id: I817111cbd3e81b93d8b02d0654ba68c8678b1bbe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-11amd/stoneyridge: Set BERT region size when no TSEG usedMarshall Dawson
Expand the BERT reserved region size setting to account for the possibility of no TSEG configuration. This change is only for completeness, as stoneyridge must always use TSEG. Change-Id: I90753fa408cfac4de38aff08979c45349bb62a66 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-11soc/intel/baytrail: Remove trailing space in log messagePaul Menzel
Currently, there is a trailing space in the log message below. > Enabling VR PS2 mode: VNN VCC So, put the space before the word. Change-Id: Ic536d77aa910b1b98a3c2f35d595dee4251b1c18 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/28525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-09-10soc/sifive: fix compiler warningPhilipp Hug
Fix the following compiler warning on the latest toolchain: src/soc/sifive/fu540/otp.c:48:1: error: useless storage class specifier in empty declaration [-Werror] } __packed; ^ Change-Id: Ice87c821de7650ac547394efa2a4bcc5ae1ea668 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28553 Tested-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-10soc/sifive/fu540: Makefile: include mtime_init in ramstagePhilipp Hug
Fix compilation issue clint.c/mtime.c is needed as well in ramstage due to CR 28372 and 28355 Change-Id: I7c7768744a165b97978bb8f7f95acf7b32ca4aa4 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28551 Tested-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-10soc/sifive/fu540: Add driver for OTP memoryPhilipp Hug
Provides minimal functionality to read the SOC s/n from the NeoFuse one time programmable memory. Change-Id: I14b010ad9958931e0a98a76f76090fd7c66f19a0 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/27435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-10soc/intel/cannonlake: Correct number of root ports for CNL PCH HMaulik V Vaghela
CNL PCH H supports maximum 24 root ports while CNL PCH LP supports maximum 16 root ports. Change-Id: I2cc3ae282d4eb5da8b0618451e062a6c061f1d6f Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/28399 Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-10soc/sifive/fu540: add CLINT supportXiang Wang
Change-Id: Ibc3a8644dcb83d5697d9d6e551c7682377285116 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-10riscv: update mtime initializationXiang Wang
Add a interface, which is implemented by SoC. Change-Id: I5524732f6eb3841e43afd176644119b03b5e5e27 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-10complier.h: add __noreturn and use it in code baseAaron Durbin
Add a __noreturn macro that wraps __attribute__((noreturn)) and replace current users with the macro. Change-Id: Iddd0728cf79678c3d1c1f7e7946c27375a644a7d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-10soc/intel/skylake: Add support for CmdTriStateDis UPD in devicetreeShaunak Saha
This patch adds the support for CmdTriStateDis FSP upd in skylake soc structure so that we can define it in devicetree.CmdTriStateDis needed to be set for the skylake/kabylake based boards where LPDDR3 design is without RTT for CMD/CTRL.We need to set this bit for those designs for the margin to be proper. BUG=b:111812662 TEST=Run memtester app and also webgl fishtank on the LPDDR3 kabylake boards and also check the margin data is proper in FSP. Change-Id: Ida69e443aa6ea4b524bd3ea2dcf26f4e63010291 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/28424 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-07amd/stoneyridge: Construct ACPI BERT tableMarshall Dawson
Add a Boot Error Record Table to the ACPI information. Avoid a driver error message by skipping the table altogether when no errors are found, or support isn't built in. BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system. Change-Id: I6fe38eefacaad0bc73d0cb4ae44a339a45857128 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28478 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-07amd/stoneyridge: Construct BERT region from machine checkMarshall Dawson
Add functions to build a Boot Error Record Table region based on settings found in the MCA registers. Two entries are reported for each error due to the nature of the ACPI driver. The first is a Generic Processor Error, which the OS recognizes and parses. Generic errors cannot convey much error description or processor context. Therefore an IA32/X64 Processor Error is also added, which allows reporting the values found in the MCA MSR registers. Follow-on work could decode the MC errors more precisely, and better completing the Generic Error and the Check structure. The current level of support is sufficient to identify a (i.e., human readable) problem in dmesg, and provides adequate context information for analysis. BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system. Change-Id: I4d4ce29ddefa22aa29e6d3184f1adeaea1d5f837 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28477 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-07amd/stoneyridge: Create an MCA structureMarshall Dawson
Convert the Machine Check reporting to use a newly defined structure. This will facilitate later patches that will pass pointers to the MSR values. BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system. Change-Id: I0a98aecc83a0fa1c5ca7926849a89145a595d9ff Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28476 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-07amd/stoneyridge: Relocate MCA error identificationMarshall Dawson
Move the process of interrogating the Machine Check registers into its own file. This rearranges source code in preparation of supporting a Boot Error Record Table, which stoneyridge will use to report latent MC errors to the OS. BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system. Change-Id: Ia3275e9135dc96ba4a717c9371f38843fa1e3e64 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-07amd/stoneyridge: Adjust memory map for reservedMarshall Dawson
Carve out memory to be reported to the OS as reserved. This makes room for a region usable for Boot Error Record Table information. The BERT region reserved size is larger than likely requried, however the SMM region's base must be on a boundary matching the granularity of its size. BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system. Change-Id: I0958f6b6bab3fe9dae36c83e1fd9ae6ed0290a18 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28474 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-07fsp_broadwell_de: enable spi consoleOkash Khawaja
this enables spi console for wedge100s with broadwell_de. the console size is 64kb. enabling spi console in `board.fmd` enables code which calls into `timer_monotonic_get` (from `spi_flash_cmd_poll_bit`) and `udelay` (from `ich_status_poll`). this patch selects `TSC_CONSTANT_RATE` in fsp_broadwell_de's Kconfig to satisfy that. Change-Id: Ib925c5aee88b65c46a81534405c364dd5649f8e8 Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com> Reviewed-on: https://review.coreboot.org/28528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-06soc/intel/cannonlake: Fix Coverity Scan reportLijian Zhao
Fix uninitialized variable OnModuleSpd, init bool with false first. BUG=CID 1395330, 1395331 TEST=N/A Change-Id: I050287370f7321ff9905937304bb3cc7f20d8c6a Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-06mediatek: Refactor memory test code among similar SoCsTristan Shieh
Refactor memory test code which will be reused among similar SoCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I800aa9a73f0b4588f46a98c964e2794bdf04f09d Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Julius Werner <jwerner@google.com>
2018-09-06soc/intel/common: Add function to set BILD bit in RTCRizwan Qureshi
Add a function to set the Bios Interface Lock Down bit (bit 31) in RTC Configuration register (0x3400). This bit when set prevents the top swap enable bit (bit 0) in the RTC BUC register (0x3414) from being changed. Change-Id: Iacaeeb0d6cabcf0c2c46a58948457ab832351476 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/28057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-06chromeos/gnvs: remove function and naming cleanupJoel Kitching
- Remove unused acpi_get_chromeos_acpi_info (see CB:28190) - Make function naming in gnvs.h consistent (start with "chromeos_") BUG=b:112288216 TEST=compile and run on eve Change-Id: I5b0066bc311b0ea995fa30bca1cd9235dc9b7d1b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-02riscv: separately define stack locations at different stagesXiang Wang
BOOTBLOCK/ROMSTAGE run in CAR/scratchpad. When RAMSTAGE begins execution will enable cache, then CAR will disappear. So the Stack will be separated. Change-Id: I37a0c1928052cabf61ba5c25b440363b75726782 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-31siemens/mc_apl1: Correct the Tx signal from SATA interfaceMario Scheithauer
Because of an incorrect transmit voltage swing, the signal must be adjusted. The factor of slices for full swing level can be corrected via the High Speed I/O Transmit Control Register 3. Change-Id: I116802cd2a944658fc3022e948eba43cebe52bb4 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2018-08-30soc/intel/cannonlake: Fix comment errors for SMBUSLijian Zhao
On CannonLake PCH, SMBUS stays at Bus 0 Device 31 and Function 4, previous comment in southbridge.asl mention it as Function 3 that was a mistake. BUG=N/A TEST=N/A Change-Id: I29786457379809b6fcb592e1136ff612539e24dc Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-08-30soc/amd/stoneyridge/enable_usbdebug.c: Update pci_ehci_dbg_set_port()Richard Spiegel
Function pci_ehci_dbg_set_port() used NDA register DEBUGPORT_MISC_CONTROL, which was deprecated in favor of a public PCI register (though only the bits to enable debug port became public) 0x90. Therefore code needs to be updated. BUG=b:69231009 TEST=Build and boot grunt. Change-Id: Ibb25992729d984b8570712f91a03a7cd1e9b8643 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-30soc/intel/cannonlake: Update PMC base address for CNP H and LPMaulik V Vaghela
PMC base address is different for CNP LP pch and CNP H pch. Added logic to determine PMC base addrress dynamically based on PCH ID. BUG=none BRANCH=none TEST=Boot Coffeelake U RVP board and check if PMC base address is determined correctly. Change-Id: I833395260e8fb631823bd03192a092df323250fa Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27523 Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28soc/intel/cannonlake: Change LPDDR4 to MEMCFGLijian Zhao
Modify the previously SOC_CNL_LPDDR4_INIT to SOC_CNL_MEMCFG_INIT, to make the infrasturture to handle both LPDDR4 and DDR4 cases in the future. Consider the case of reading SPD from SMBus other than providing SPD pointer directly. BUG=N/A TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I2f898147f67dd52b89cc3d9fc4e6b3854fa81f57 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28248 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28siemens/mc_apl1: Extend circuit life by clock gating and power gatingMario Scheithauer
The firmware of devices connected to LPC should deassert the LPC CLKRUN# signal when there is no bus activity on LPC. Necessary changes: - Enable LPC CLKRUN# - Enable LPC PCE (Power Control Enable) - Enable LPC CCE (Clock Control Enable) - Remove I/O decoding range on LPC for COM 3 - Disable I/O UART driver Change-Id: I2fd80e3fdcf23658f97b8182a77df7e09ddf25d6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-27intel: Use common HPET table revision functionMarc Jones
Use get_acpi_table_revision(HPET) to keep all table versions in sync. Change-Id: Idb5e8ccd49ec27f87a290f33c62df3c177645669 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-27update all FADT version 3.0 to use the get tables functionMarc Jones
Most FADT report using ACPIv3 FADT table. Using the get revision function keeps the table versions in sync. Change-Id: Ie554faf1be65c7034dd0836f0029cdc79eae1aed Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-24soc/intel/apollolake: Make eMMC max speed configurableMario Scheithauer
The eMMC maximum speed is set to HS400 mode per default. To increase the lifetime of the circuit, it is necessary to reduce the eMMC speed. Change-Id: I6fa5eb56a0593e24269ef143645c506232879889 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28282 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-24soc/cn81xx: Add vboot supportPhilipp Deppenwiese
* Add VERSTAGE and VBOOT_WORK to memlayout. * Add hard and soft reset. * Add missing makefile and kconfig includes. Change-Id: I0d7e3c220f5c2c50c4ffe59ac929cb865bfac0ad Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/28022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-24soc/cavium/cn81xx: Don't directly manipulate devicetree dataPatrick Rudolph
As preparation to constify devicetree data, do it the right way. Change-Id: I5081de020bb73c56aa8bdf7bb17fe6b2913d0ffe Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-24device_tree/fit: Constify data structuresPatrick Rudolph
* Add const quailifier to arguments and elements. * Add casts where necessary in cn81xx/soc. Tested on Cavium CN81xx EVB SFF. Change-Id: Id27966427fb97457fe883be32685d1397fb0781f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-22soc/intel/apollolake: Fix logical vs. bitwise operatorJohn Zhao
src/soc/intel/apollolake/chip.c Apply bitwise operator instead of logical one. Found-by: Coverity Scan BRANCH=None TEST=Built & booted Yorp board. Change-Id: I36746b04dec889f53c8d7eeb3b1d8118eff1de42 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-22soc/amd/stoneyridge/smihandler.c: Report pending wake eventRichard Spiegel
There's a small window of opportunity when CPU is already in SMM but has not yet entered S3 for a wake event to happen, which would cause a failed S3 entry. Check for pending events at the very last moment possible, and if there are pending wake events report them. BUG=b:111100312 TEST=build and boot grunt. Change-Id: I9472fdf481897fcf9f4c669f6b1514ef479fce7a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-22cbtable: remove chromeos_acpi from cbtableJoel Kitching
Since we can derive chromeos_acpi's location from that of ACPI GNVS, remove chromeos_acpi entry from cbtable and instead use acpi_gnvs + GVNS_CHROMEOS_ACPI_OFFSET. BUG=b:112288216 TEST=None CQ-DEPEND=CL:1179725 Change-Id: I74d8a9965a0ed7874ff03884e7a921fd725eace9 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-22acpi: remove CBMEM_ID_ACPI_GNVS_PTR entryJoel Kitching
Since we can retrieve the address of ACPI GNVS directly from CBMEM_ID_ACPI_GNVS, there is no need to store and update a pointer separately. TEST=Compile and run on Eve Signed-off-by: Joel Kitching <kitching@google.com> Change-Id: I59f3d0547a4a724e66617c791ad82c9f504cadea Reviewed-on: https://review.coreboot.org/28189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-21soc/intel/skylake: Remove unsupported sleepstates in ACPI tableLucas Chen
Some OS certification test (for example Windows) will fail if there are unsupported sleep states. Since these states are not really used today, we can remove them from ACPI table. BRANCH=eve BUG=b:72197653 TEST=certification system sleep test pass. Change-Id: I5f5122cac1bf61f7c580afb18cc66b5ff07286fb Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1065401 Commit-Queue: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://review.coreboot.org/28080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-08-20soc/intel/skylake: Support PL1 override optionWei Shun Chang
In legacy mode, DPTF on some systems may rely on MMIO to control PL1 settings. However, MSR PL1 also contributes to the decision of max PL1 power; and in the current design, the lower value takes effect. In order to align MMIO and MSR settings, a tdp_pl1_override option is added to override the MSR PL1 limitation. BRANCH=eve BUG=b:73133864 TEST=1. Write PL1 override setting in devicetree.cb 2. Verify the MSR PL1 limitation is set correctly. Change-Id: I35b8747ad3ee4c68c30d49a9436aa319360bab9b Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20soc/intel/skylake: add CPPC supportMatt Delco
ACPI 5.0 defines a method _CPC for "Continuous Performance Control" (CPPC). Linux has a driver that enables features like speed shift without consulting ACPI. Other OSes instead rely on this information and need a _CPC present. Prior to this change performance in Win10 never exceeds 80% and MSR 0x770 is 0, while with this change (and enabling eist) higher speeds can be achieved and the MSR value is now 1. Change-Id: Ib7e0ae13f4b664b51e42f963e53c71f8832be062 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-08-20soc/intel/common/block: Move common uart function to block/uartSubrata Banik
This patch moves uart functions which are common across multiple soc to block/uart. This will remove redundant code copy from soc {skylake/apollolake/cannonlake}. BUG=b:78109109 BRANCH=none TEST=Build and boot on KBL/APL/CNL platform. Change-Id: I109d0e5c942e499cb763bde47cb7d53dfbf5cef6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20soc/intel/common/block: Add WHL 2-core SKUKrzysztof Sywula
There are two SKUs of Whiskey Lake W0, 2-core and 4-core. Change-Id: Ia9b2707568702a5fbae3e9495ca53df34613a542 Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/28111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20soc/intel/apollolake: Force USB-C into host modeJohn Zhao
When USB OTG is set, GLK FSP enables xHCI SW ID pin and configures USB-C as device mode. Force USB-C into host mode. BUG=b:111623911 TEST=Verified that USB-C being host mode once USB OTG is set. Change-Id: Iaca3d25a1159f922b743963cbc508d8defa7b6ff Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20intel/common/block: Fix issues found by klockworkJohn Zhao
src/soc/intel/common/block/cpu/mp_init.c Function init_cpus: Pointer dev checked for NULL may be dereferenced. src/soc/intel/common/block/graphics/graphics.c Function graphics_get_bar: Pointer dev returned from call may be NULL and will be dereferenced. BRANCH=None TEST=Built & booted Yorp board. Change-Id: I5e7caa15a3911e05ff346d338493673af5318a51 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-17arm64: Factor out common parts of romstage execution flowJulius Werner
The romstage main() entry point on arm64 boards is usually in mainboard code, but there are a handful of lines that are always needed in there and not really mainboard specific (or chipset specific). We keep arguing every once in a while that this isn't ideal, so rather than arguing any longer let's just fix it. This patch moves the main() function into arch code with callbacks that the platform can hook into. (This approach can probably be expanded onto other architectures, so when that happens this file should move into src/lib.) Tested on Cheza and Kevin. I think the approach is straight-forward enough that we can take this without testing every board. (Note that in a few cases, this delays some platform-specific calls until after console_init() and exception_init()... since these functions don't really take that long, especially if there is no serial console configured, I don't expect this to cause any issues.) Change-Id: I7503acafebabed00dfeedb00b1354a26c536f0fe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28199 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-17soc/amd/common/block/pi/agesawarapper.c: Use find_image()Richard Spiegel
In preparation to removing AmdLib, replace function LibAmdLocateImage() with its ported version find_image(). BUG=b:112625809 TEST=Build and boot grunt. Change-Id: I75ddd55f7e3e7f2cd7914f97c99b62690ae70660 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28164 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-17soc/amd/common/block: Port vendorcode's LibAmdLocateImageRichard Spiegel
In preparation to removing AmdLib, function LibAmdLocateImage() has to be ported to be used by agesawrapper. The most important aspect of this porting is that it has to obey coreboot format, specifically 8 character tab and 80 characters max. This required breaking the function in 2 (to solve indentation) and rename some variables to shorter names. One important aspect was breaking (AMD_MODULE_HEADER*)(((AMD_IMAGE_HEADER *) CurrentPtr)->ModuleInfoOffset) into: image_ptr = (AMD_IMAGE_HEADER *) current_ptr; if (validate_image((void *)image_ptr->ModuleInfoOffset, and, within validate_image completed by: AMD_MODULE_HEADER *mod_ptr = (AMD_MODULE_HEADER *)module_chain; BUG=b:112625809 TEST=Build grunt, functionality tested in next commit. Change-Id: I0d1e8b966cf7606fdb15a95de5771f835f07b2bc Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-17Fix PCI ACPI _OSC methodsMarc Jones
Fix the IASL build warnings: Object is not referenced (Name [CDW2] is within a method [_OSC]) Object is not referenced (Name [CDW3] is within a method [_OSC]) Remove the not referenced objects. They are not needed. BUG=b:112476331 TEST=IASL doesn't give the warning. Change-Id: I5b38d4de3f9875c5b013a49eb5146bf5916b96a6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-17soc/intel/skylake: permit Kconfig to set subsystem IDMatt Delco
This change permits the subsystem ID to be specified via Kconfig for the devices on the SoC. Some devices are getting zero'ed subsystem IDs because the unset (and thus zero'ed) config options are overwriting the fsp defaults. With this change the fsp defaults will only be overwritten by non-zero config values. Change-Id: I0f7bb8e465f55e5dd6d8e0fad71b9b2a22f089dc Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-08-16amd/stoneyridge: Add PMxC0 reset status to boot logEdward Hill
Print the PMxC0 S5/Reset status bits to the console. TEST=Inspect console for Grunt BUG=b:110788201 Change-Id: Ia905bb325a535fd4aa7082011cdfe92f08dff2cb Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://review.coreboot.org/28020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-08-15Stoneyridge: Remove VENDORCODE_FULL_SUPPORTRichard Spiegel
Remove VENDORCODE_FULL_SUPPORT from /soc/amd/stoneyridge/Kconfig and from vendorcode/amd/pi/00670F00/Makefile.inc, thus completing the removal of VENDORCODE_FULL_SUPPORT from coreboot. BUG=b:112578491 TEST=none, VENDORCODE_FULL_SUPPORT already not used. Change-Id: Idb5f6dc7add1617f7a97a97ae110901b2dec0996 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-14soc/amd/stoneyridge: Add bootblock_fch_initRaul E Rangel
Add a method in bootblock that can be used for printing registers. BUG=none TEST=compiled grunt Change-Id: I8dff30e589761fbad92cfc2709546dba169993d8 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28059 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13soc/intel/broadwell/Kconfig: Clean up redefined config optionsArthur Heymans
All broadwell board set HAVE_IFD_BIN to default n, overloading the option in soc, therefore just use the defaults in sb/intel/common/firmware. Change-Id: I250dbbc9d61ecedc1a1eb48751ad966732604349 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28011 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13soc/intel/braswell/Kconfig: Clean up redefined config optionsArthur Heymans
There is no need to redefine option present in southbridge/intel/common/firmware/Kconfig. FAKE_IFD depends on out tree flashrom patches for which there are better alternatives available now, so don't build with FAKE_IFD by default. Change-Id: Icd41137a1bbfe519c89a71cc0c7c3755558bd834 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28010 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13fsp_broadwell_de: Increase CONFIG_MAX_CPUS to 32Samuel Jimenez
Fix to accomodate for boards with more than 16 cores. Change-Id: I35b61d94491c21ef76717f761e566ca815880f27 Signed-off-by: Samuel Jimenez <aerojsam@gmail.com> Reviewed-on: https://review.coreboot.org/27847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13soc/intel/skylake: use unique _uidMatt Delco
There's two cases of 1 being used. This changes the eighth instance to use 8. Change-Id: I7057a4345dadcc6f8fb43093844d27007444f481 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-13mediatek: Map SRAM as secure and cached memoryTristan Shieh
This patch changes the mapping of SRAM from non-secure to secure. Without this patch, mmu_config_range() can not work when MMU is enabled. The new config is still in non-secure cache since TTB section is allocated in SRAM which is mapped as non-secure. BUG=b:80501386 TEST=Boots correctly on Kukui and Elm Change-Id: Ia5b8716cfcca64d1d716a177225ea2f7ac2920a6 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-13intel/apollolake: Fix typo in dptf.aslChris Zhou
Fix define typo in dptf.asl BUG=none TEST=emerge-octopus coreboot PASS Change-Id: I1c3bd55d1507e6fffe638bba38c99a9851b8a96a Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-08-13mediatek/mt8183: Add DRAM resource in ramstageTristan Shieh
Add DRAM resource in ramstage to load payload. BUG=b:80501386 TEST=Load bl31 and depthcharge correctly on Kukui with more patches applied. Change-Id: Ie793b403bbbdb3c231dfa2caef29dcbb596b1a61 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27971 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13soc/broadcom/cygnus: Increase romstage SRAM size in memlayoutPhilipp Deppenwiese
* Needed for additional code in later patches. * SOC is obsolete anyway. Change-Id: I5bbdf19cc886103e9e7a6b75219d6881cfe9c757 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23764 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-12soc/intel/apollolake: Get rid of cnvi.aslFurquan Shaikh
There is no need to add a special cnvi.asl file for the CNVi device. This can be handled by drivers/intel/wifi just like a PCIe WiFi device. This change gets rid of the cnvi.asl file and its usage in southbridge.asl file. BUG=b:112371978 Change-Id: I0b798cdd430768730b7ada61ca4cb1f63c2a4229 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12soc/intel/apollolake: Add CNVi device to list of PCI devsFurquan Shaikh
This change adds CNVi device to list of PCI devs. BUG=b:112371978 Change-Id: I6def98db3846c2244812a9a2ce84340bd2149b48 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-10drivers/i2c: Add i2c TPM support for different stagesPhilipp Deppenwiese
Change-Id: Ib0839933f8b59f0c87cdda4e5374828bd6f1099f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-08-10soc/cavium/cn81xx: Fix minor thingsPatrick Rudolph
* Move cbmem.c to cn81xx folder * Store CBMEM below 4 GiB * Make sure CBMEM doesn't overlap with ATF scratchpad * Fix ATF scratchpad not marked as reserved due to wrong calculation * The scratchpad is the last 1 MiB at the end of DRAM. Tested on Cavium CN81xx EVB: The ATF scratchpad is now marked reserved and the configuration tables are located below 4 GiB. Linux still boots. Change-Id: Ibbc8b586f04bd6867c045f5546b32a77c057ac74 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27955 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-10[HACK]cavium/cn81xx/soc: Don't advertise CAR area as usablePatrick Rudolph
It's broken. Change-Id: I3ec8fff99e21cbdf4ad3f4562ff9bbc1cd3c135b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-10src: Fix typoElyes HAOUAS
Change-Id: I689c5663ef59861f79b68220abd146144f7618de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-10src/soc/intel: Add new device IDs to support coffeelakeMaulik
1. Add new device IDs for SATA, GT and Northbridge to pci_ids.h 2. Add entry to identify CFL U GT and CPU to respective files 3. Add entry to identify CFL U to report_platform.c BUG=none BRANCH=none TEST=Boot to CFL U RVP board with this patch and check if coreboot is able to enumerate various devices and display correct component names properly in serial logs. Change-Id: I47c97fb9eb813587cd655e2bce05a686091619ed Signed-off-by: Maulik <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-08-10arm64: Remove set_cntfrq() functionJulius Werner
CNTFRQ_EL0 is a normal AArch64 architectural register like hundreds of others that are all accessed through the raw_(read|write)_${register}() family of functions. There's no reason why this register in particular should have an inconsistent accessor, so replace all instances of set_cntfrq() with raw_write_cntfrq_el0() and get rid of it. Change-Id: I599519ba71c287d4085f9ad28d7349ef0b1eea9b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27947 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-10marvell: Remove 'mvmap2315' SoCJulius Werner
I'm pretty sure this SoC doesn't actually exist. Change-Id: I53e268ee1795e524a2a4562d67a2b9f28af966d1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27965 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09src/soc: Fix typoElyes HAOUAS
Change-Id: I8053d0f0863aa4d93692487f1ca802195c2d475f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09rk3288: Dig up two more KB of SRAM from under the couch cushionsJulius Werner
RK3288 has always been notoriously low on SRAM, to the point where its boards have less than 100 bytes left in both their bootblock/verstage sections. This becomes a problem every time we try to add a tiny amount of code to common coreboot interfaces that are included in them. This patch manages to add another KB to each, one from the CBMEM console (which now might get cut off a bit, but that's life) and one by moving the TTB_SUBTABLES to PMUSRAM. PMUSRAM is a weird world where write accesses must always be exactly 4 bytes long or they hang the CPU, so we mostly ignore it... but thankfully, page table entries are exactly 4 bytes long and that's the only thing we write to this region, so it works out in this case. Change-Id: I5aecd66db40b3f52299b270322b8c8784dbe7e6f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-08soc/amd/stoneyridge: Prevent reboot in romstageRaul E Rangel
By setting this register in bootblock AmdInitEnv will no longer trigger a reset in romstage. This fixes a few vboot test failures and also speeds up boot time. BUG=b:111610455 TEST=Built grunt and made sure bootblock only happens once on cold boot, and S3 resume. Change-Id: Ie19f7a14deaef45ac63156bec6946273c1b9447e Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 21:57:48 +0000