summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2017-02-22Broadwell/Sata: Add support for setting IOBP registers for Ports 2 and 3.Youness Alaoui
The Broadwell SATA controller supports IOBP registers on ports 0 and 1 but Browell supports up to 4 ports, so we need to support setting IOBP for ports 2 and 3 as well. The magic numbers (IOBP SECRT88 and DTLE) for ports 2 and 3 were only guessed by looking at ports 0 and 1 and extrapolating from there. Port 3 has been tested (DTLE setting on Librem 13) and confirmed to work so we can assume that port 2 and 3 magic numbers are valid, but having someone confirm them (through non-public documents?) would be great. Change-Id: I59911cfa677749ceea9a544a99b444722392e72d Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/18408 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-22acpi: Add ACPI_ prefix to IRQ enum and struct namesFurquan Shaikh
This is done to avoid any conflicts with same IRQ enums defined by other drivers. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I539831d853286ca45f6c36c3812a6fa9602df24c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18444 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-22qualcomm/ipq40xx: add vector operation method to SPIYuji Sasaki
Adding spi_xfer_two_vectors as .xfer_vector for ipq40xx spi_ctrlr. Commit c2973d196d1 ("UPSTREAM: spi: Get rid of SPI_ATOMIC_SEQUENCING") has added a new driver method xfer_vector to support combined write-read operation within a single CS cycle. The method is wrapped in the spi_xfer_vector() API. When spi_ctrlr structure does not have xfer_vector method, API calls write and read operations sequentially. However the QCA40xx SPI driver has "forced" CS activation-inactivation in xfer method, so individual operation will break CS after write operation, making combined write-read cycle broken. Adding xfer_vector method to spi_ctrlr is a simple fix to prevent this. BUG=None BRANCH=none TEST=built and run on Gale Change-Id: I2258e563d0793bcacd626f78b8e96b3649a8e4a4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 88a8824951cef4fe293dfa6e3a1a837ae07b6156 Original-Change-Id: I031e85ce5b847353cb1084f6f68b2af8c6f702e1 Original-Signed-off-by: Yuji Sasaki <sasakiy@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/433439 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/18297 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-22soc/intel/skylake: Fix broken suspend-resumeFurquan Shaikh
With recent change (a4b11e5c90: soc/intel/skylake: Perform CPU MP Init before FSP-S Init) to perform CPU MP init before FSP-S init, suspend resume is currently broken for all skylake/kabylake boards. All the skylake/kabylake boards store external stage cache in TSEG, which is relocated post MP-init. Thus, if FSP loading and initialization is done after MP-init, then ramstage is not able to: 1. Save FSP component in external stage cache during normal boot, and 2. Load FSP component from external stage cache during resume In order to fix this, ensure that FSP loading happens separately from FSP initialization. Add fsp_load callback for pre_mp_init which ensures that the required FSP component is loaded/saved from/to external stage cache. BUG=chrome-os-partner:63114 BRANCH=None TEST=Verified that 100 cycles of suspend/resume worked fine on poppy. Change-Id: I5b4deaf936a05b9bccf2f30b949674e2ba993488 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18414 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-20soc/intel/skylake: Expand USB OC pins definition to support PCH-HTeo Boon Tiong
Currently the USB OC pins definition only being defined up to OC3. For PCH-H, OC4 and OC5 are needed, so add both into OC pin enum. Changes is being verified and booted to Yocto with Saddle Brook. Change-Id: Idaed6fa7dcddb9c688966e8bc59f656aec2b26eb Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/18364 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-20lynxpoint/broadwell: fix PCH power optimizerMatt DeVillier
Setting both bits 27 and 7 of PCH register PMSYNC_CFG (PMSYNC Configuration; offset 0x33c8) causes pre-OS display init to fail on HSW-U/Lynxpoint and BDW-U ChromeOS devices when the VBIOS/GOP driver is run after the register is set. A re-examination of Intel's reference code reveals that bit 7 should be set for the LP PCH, and bit 27 for non-LP, but not both simultaneously. The previous workaround was to disable the entire power optimizer section via a Kconfig option, which isn't ideal. Test: unset bit 27 of PMSYNC_CFG and boot google/lulu, observe functional pre-OS video output Change-Id: I446e169d23dd446710a1648f0a9b9599568b80aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18385 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20Revert "intel/lynxpoint,broadwell: Fix eDP display in Windows, SeaBios & Tiano"Matt DeVillier
We've been able to narrow down the problem to a single register/ single bit, so revert this commit and address the problem in a follow-on commit. This reverts commit 0f2025da0fd4dce6b951b4c4b97c9370ca7d66db. Change-Id: I780f9ea2976dd223aaa3e060aef6e1af8012c346 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18384 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-19soc/intel/skylake: Disable s0ix if not enabled in devicetreeDuncan Laurie
There is an enable_s0ix config option in the devicetree that should be used to disable it when not set: - do not export C8/C9/C10 C-states in _CST - do not enable SLP_S0 in FSP BUG=chrome-os-partner:58666 TEST=test on eve board to ensure that OS only sees 3 ACPI C-states instead of 6 and that it no longer attempts to enter C10 Change-Id: I90e4dc776d1d17d0b700cda63c8476786cd2e4ff Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18394 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-18soc/intel/skylake: add PrmrrSize to chip configRobbie Zhang
Prmrr configuration is supported by Kabylake FSP-M with UPD provided. It is required as one of the SGX initialization steps in BIOS. BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Tested on Eve, verified uncore PRMRR MSRs get programmed to set size and boot. Change-Id: I2b3dc7c92487505165ee429bd1a37bd60ceac8f3 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18361 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17soc/intel/skylake: Add Maxim 98927 and Realtek 5663 NHLT blob supportRizwan Qureshi
Add APIs and required parameters for creating Maxim 98927 and Realtek 5336 SSP endpoints in NHLT table. BUG=chrome-os-partner:62051 BRANCH=None TEST=check that NHLT table created is created properly Change-Id: Ica302aab05c5364faf4923dc5327be8e8eaae8b4 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: M Naveen <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/18213 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-17soc/intel/skylake: Add config option for KabylakeRizwan Qureshi
Currently there is no distinction between mainboards using Skylake or Kabylake SoC, Add a config option for Kabylake SoC to allow mainboards to explicitly select if they are using it. Change-Id: Ie7960bd81f88a223894afe3115ddc0bc637e4be4 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18312 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-17intel/skylake: add function is_secondary_thread()Robbie Zhang
There are MSRs that are programmable per-core not per-thread, so add a function to check whether current executing CPU is a primary core or a "hyperthreaded"/secondary core. For instance when trying to program Core PRMRR MSRs(per-core) with mp_init, cpu exception is thrown from the secondary thread. This function was used to avoid that. Potentially this function can be put to common code or arch/x86 or cpu/x86. BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Tested on Eve, verified core PRMRR MSRs get programmed only on primary thread avoiding exeception. Change-Id: Ic9648351fadf912164a39206788859baf3e5c173 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18366 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-16soc/intel/skylake: Add support for SPI deviceFurquan Shaikh
Add a new PCI driver for SPI devices with supported PCI ids. Also, provide a translation table to convert struct device structure into SPI bus number. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: If860eb819f2ce5ae5443f808b356af57f86c52be Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18341 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-16soc/intel/skylake: Add GSPI controller get_config supportFurquan Shaikh
Provide implementation of get_config routine for GSPI controller on skylake platforms. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully. Change-Id: I5170076c15d72a7f29acd0989acef5b9149e2ba0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18338 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-16soc/intel/skylake: Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL ↵Sooi, Li Cheng
HALO SOC Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL HALO SOC Change-Id: I6a44d55d1588d2620bd1179ea7dc327922f49fd7 Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com> Reviewed-on: https://review.coreboot.org/18028 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-14soc/intel/skylake: Perform CPU MP Init before FSP-S InitSubrata Banik
As per BWG, CPU MP Init (loading ucode) should be done prior to BIOS_RESET_CPL. Hence, pull MP Init to BS_DEV_INIT_CHIPS Entry (before FSP-S call). BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Boot to OS with all threads enabled. Change-Id: Ia6f83d466fb27e1290da84abe7832dc814b5273a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18287 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-14Revert: soc/intel/skylake: Set FSP-S UPD PchHdaIDispCodecDisconnect to 1Duncan Laurie
This reverts commit 32997fb0bcb9f4183789331a91fd83138776b96f. This change is breaking I2S audio on Kabylake platforms so revert the change to fix audio. BUG=chrome-os-partner:61548,chrome-os-partner:61009 TEST=manual testing on Eve P1 system Change-Id: I3212c8be83078ed57e38501386605e67b87d5bd0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18360 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-14google/rambi: add explicit pull-down for ram-idMatt DeVillier
Some variants need the internal pull resistor on GPIO_SSUS_40 set explicitly to pull down rather than disabling the pull, in order for the ram-id to be read correctly via GPIO. Correct this by adding a function to enable and set the internal pull and define its use as needed in the board's variant.h. Chromium source: branch: firmware-gnawty-5216.239.B /src/soc/intel/baytrail/baytrail/gpio.h#418 /src/mainboard/google/gnawty/romstage.c#60 Test: boot 4GB Candy board and observe correct RAM id, amount detected Change-Id: I8823c27385f4422184b5afa57f6048f7ff2a25ab Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18309 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-14intel/skylake: Disable FADT.8042 if NO_FADT_8042 is setJenny TC
Kernel relies on FADT 8042 flag to enable/disable 8042 interface. If FADT reports 8042 capability and 8042 (/PS2) capability is actually disabled by coreboot, kernel would assume the presence of 8042 based on the FADT flag. This results in undesired system power off when kernel tries to access the 8042 memory region. To address this, CONFIG_NO_FADT_8042 was added to selectively disable 8042 on FADT. BUG=chrome-os-partner:61858 TEST=Boot OS and verify FADT 8042 flag Change-Id: Ic80b3835cb5cccdde1203e24a58e28746b0196fc Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/18307 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-08soc/intel/apollolake: dump CSE statusAaron Durbin
Dump the CSE status registers for potential debugging purposes. Explicitly call out manufacturing mode of the part since it's important shipping devices ensure manufacturing mode is locked down. Intel is planning on writing a common driver so a complete status -> string dumps was not done because (surprise surprise) not all the fields are equal with previous implementations. BUG=chrome-os-partner:62177 BRANCH=reef TEST=Booted and noted dump of CSE status registers. Change-Id: I71d15722bb193877f1569c1d3e7f441302f5bd14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18303 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-01-24rockchip/rk3399: set edp pclk to 25MHzLin Huang
It may cause an edp aux transfer error if the edp pclk is set too high, so reduce it to 25MHz. BUG=chrome-os-partner:60130 BRANCH=None TEST=Build and Boot Change-Id: Id1063baa5a82637b03c0f1f754181df074ab17cc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f7ce31a7483e765ae0c86f8e62ef51413ee1596 Original-Change-Id: Ibb86c12c1d7c00dc3b4cc7a6bdf3bd6e895cd9f3 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/429410 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18178 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-22soc/intel/skylake: Include I2C code in romstageDuncan Laurie
The lpss_i2c driver is enabled in romstage, so the SOC needs to export the pre-ram compatible I2C controller info, which for skylake is in the bootblock/i2c.c file. This was not causing a compiler error in normal use, but when adding I2C debug code in romstage it failed to compile. With this added, I can now do I2C transactions in romstage. Change-Id: I0778b0497d0b6936df47c29b2ce942c8d90cf39b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-21soc/intel/apollolake: correct GPIO 13 IRQ numberAaron Durbin
The define for GPIO_13_IRQ had the wrong IRQ number. It should be 0x70 instead of 0x6f. BUG=chrome-os-partner:62085 BRANCH=reef TEST=touch controller doesn't indicate continuous interrupts Change-Id: I3a0726db59fc1eb7736d348aecbf1082719f15b2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18190 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-20soc/intel/skylake: Set FSP-S UPD PchHdaIDispCodecDisconnect to 1Barnali Sarkar
As per Audio PCH team recommendation the iDisplay Audio/SDIN2 should be disabled to bypass InitializeDisplayAudio() function call. Display Audio Codec is HDA-Link Codec, which is not supported in I2S mode BUG=chrome-os-partner:61548 BRANCH=none TEST=Tested to verify that InitializeDisplayAudio() does not get called. Change-Id: Ie0771a8653821e737d10e876313917b4b7c64499 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18091 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-01-19driver/intel/fsp1_1: Fix boot failure for non-verstage caseTeo Boon Tiong
Currently car_stage_entry is defined only in romstage_after_verstage and as a result when SEPARATE_VERSTAGE is not selected, there is no entry point into romstage and romstage will not be started at all. The solution is move out romstage_after_verstage.S from fsp1.1 driver to skylake/romstage. And add CONFIG_PLATFORM_USES_FSP1_1 to fix the build and boot issue with this change. Besides that, rename the romstage_after_verstage to romstage_c_entry in more appropriate naming convention after this fix. Tested on SkyLake Saddle Brook (FSP 1.1) and KabyLake Rvp11 (FSP 2.0), romstage can be started successfully. Change-Id: I1cd2cf5655fdff6e23b7b76c3974e7dfd3835efd Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17976 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-19soc/intel/skylake: Add SATA interrupt for APIC modeSooi, Li Cheng
Add SATA interrupt for APIC mode Change-Id: I9e0682e235715399da2c585174925c89b9116ab3 Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com> Reviewed-on: https://review.coreboot.org/18130 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-16intel: Fix copy/paste error in license textMarshall Dawson
Change all instances of "wacbmem_entryanty" to "warranty". Change-Id: I113333a85d40a820bd8745efe917181ded2b98bf Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18136 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-14soc/intel/apollolake: Allow USB2 eye pattern configuration in devicetreeKane Chen
This code allows people to override the usb2 eye pattern UPD settings for boards. BUG=chrome-os-partner:61031 BRANCH=None TEST=Usb2 function ok and make sure fsp upd is overridden Change-Id: I5fab620a29aba196edf1f24ffe6a1695de1e523e Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/18060 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-13fsp_baytrail: Enable graphic init per defaultWerner Zeh
Baytrail SoC has a bug where in some cases the DisplayPort can hang leading to a non-working display (it just stays black). To avoid this hang, a patch was introduced in 02/2016 (1c3b1112fa - fsp_baytrail: Fix a possible hanging DisplayPort) but per default not switched on so that each mainboard can decide if it wants to use this patch or not. Recently a new case of this bug was reported by Benoit Sansoni (benoit.sansoni@kontron.com) and he requested to enable this fix per default as it costs him a lot of time to find the cause and even the already available fix in coreboot. To avoid this effort for someone else in the future we can enable this fix per default as no negative side effects are known and it is now tested at Siemens and at Kontron on different mainboards with success. As the goal is to enable this code permanently the config switch is not longer needed and is removed. Change-Id: I15bd682218d0dc887945cc91ee3e5488945a6355 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/18109 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-13rockchip/rk3288: rtc-rk808: fix rtc time reading issueJeffy Chen
After we set the GET_TIME bit, the rtc time can't be read immediately. We should wait up to 31.25 us, about one cycle of 32khz. Otherwise reading RTC time will return a old time. BUG=chrome-os-partner:61078 BRANCH=veyron TEST=Build and Boot Original-Change-Id: I6ec07fc6c4d6d8b27b12031423b86b8ab15da6f6 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/423272 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Change-Id: I9806b624d6e968e51d52aab8c052ae3fa77f247d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b4b708e29fbae0d8f5a2cece79711aa6b1887727 Original-Change-Id: I8c168c14437bb932a59ac0e91a01062df0cf11dc Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/427522 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18127 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-13soc/intel/skylake: Rename car_stage.S for fsp2_0Teo Boon Tiong
Cosmetic changes to rename car_stage.S to car_stage_fsp20.S, so that it is associated with FSP driver version that is being used. Tested on Kabylake Rvp11. Change-Id: I869df6eb746e3982e5912c272255eab6cb008838 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/18083 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-12soc/marvell/mvmap2315: Mark mvmap2315_reset() as noreturnMartin Roth
mvmap2315_reset() is called from locations where we're checking for NULL pointers. Because coverity can't tell from the code that the functions are not returning, it's showing errors of accessing pointers after we've determined that they're invalid. Mark it as noreturn, and add a loop in case the reset isn't on the next instruction. This probably isn't needed, but shouldn't hurt. Found-by: Coverity Scan #1362809 Change-Id: If93084629d5c2c8dc232558f2559b78b1ca5de7c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18103 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-123rdparty: update arm-trusted-firmware submoduleMartin Roth
Updated to arm-trusted-firmware TOT: 236c27d2 (Merge pull request #805 from Xilinx/zynqmp/addr_space_size) 183 commits between Sep 20, 2016 and January 10, 2017 - Also add associated change to src/soc/rockship/rk3399 Makefile.inc that is required to build the M0 Firmware. Change-Id: I49695f3287a742cd1fb603b890d124f60788f88f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18024 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-12fsp 1.0 systems: Check for NULL when saving HobListPtrMartin Roth
Die if cbmem_add can't allocate memory for the hob pointer. This shouldn't ever happen, but it's a reasonable check. - fsp_broadwell_de already had a check, but it returned to someplace inside the FSP. Just die instead. Change-Id: Ieef8d6ab81aab0ec3d52b729e34566bb34ee0623 Found-by: Coverity Scan #1291162 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18092 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-01-11skylake: Do not pass VBT to FSP if display init not requiredDuncan Laurie
The FSP 2.0 change broke the logic for determining whether or not to execute the GOP binary. Modify the FSP 2.0 code to do the right thing and check for display_init_required() before passing VBT into FSP and the GOP binary. BUG=chrome-os-partner:61726 TEST=disable developer mode and ensure FSP does not run GOP Change-Id: I7fc8055b6664e0cf231a8de34367406eb049dfe1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18084 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-06nb/intel/*/northbridge.c: Remove #include <device/hypertransport.h>Arthur Heymans
Nothing from that header is used or even declared since CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT is not selected on Intel hardware. Change-Id: I9101eb6ffa6664a2ab45bc0b247279c916266537 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18044 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2017-01-04soc/intel/quark: Add monotonic timer supportLee Leahy
Add the Kconfig value HAVE_MONOTONIC_TIMER and the routine to read the TSC for the monotonic timer. Simplify the routine to get the TSC frequency. TEST=Build and run on Galileo Gen2 Change-Id: I806fb864b01e39277bf2d6276254b0543930c2f6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18002 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03rockchip/common: Loosen I2C frequency target requirementsJulius Werner
I've recently added an assertion to ensure that the effective I2C frequency on Rockchip SoCs is not too far off the 400KHz target due to divisor rounding errors. A 10KHz margin worked fine for RK3399, but it turns out that RK3288 actually only ever hit 387KHz since its I2C clocks are based off the already pretty low 75MHz PCLKs. While we could probably change the PCLKs to make this closer, that seems like a too intrusive change for something that has already worked just fine for years, so just loosen the restriction a little more instead. BRANCH=None BUG=chromium:675043 TEST=None Change-Id: I7e96a1a75b38f8ad3971dd33046699cceb17b80d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/421095 Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: https://review.coreboot.org/18007 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03soc/intel/quark: Add early debugging codeLee Leahy
Add Kconfig values and early debugging code to better segment and debug the early code in bootblock by using the SD LED as an indicator. Update the help text for the debug Kconfig values to point to the various failure locations. TEST=Build and run on Galileo Gen2 Change-Id: I1cd62eba3e9547cb1dd7f547aaec5d4827e14633 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17985 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03soc/intel/quark: Fix serial port configurationLee Leahy
Fix serial port configuration broken by how PCI configuration space was referenced introduced by change 3d15e10a (MMCONF_SUPPORT: Flip default to enabled). TEST=Build and run on Galileo Gen2 Change-Id: I2ab52cf598795e94f1f16977f8d12b7fdd95e146 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17984 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-27cpu/intel/common: Add/Use common function to set virtualizationMatt DeVillier
Migrate duplicated enable_vmx() method from multiple CPUs to common folder. Add common virtualization option for CPUs which support it. Note that this changes the default to enable virtualization on CPUs that support it. Change-Id: Ib110bed6c9f5508e3f867dcdc6f341fc50e501d1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17874 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-12-26soc/intel/skylake: set TCC activation by BSP onlySumeet Pawnikar
TCC activation functionality has package scope. It was set for all CPU in the system which is unnecessary. In this patch TCC activation is being set by the BSP only. BUG=chrome-os-partner:59397 BRANCH=None. TEST=Built for skylake platform and verified the TCC activation value before and after S3. Change-Id: Iacf64cbc40871bbec3bede65f196bf292e0149a6 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17889 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-23soc/intel/skylake: Use the new SPI driver interfaceFurquan Shaikh
1. Define controller for fast SPI. 2. Separate out functions that are specific to SPI and flash controller in different files. BUG=chrome-os-partner:59832 BRANCh=None TEST=Compiles successfully for chell and eve. Change-Id: I2fe0ef937297297339d4ea19dc37d3061caaa80c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-21soc/intel/apollolake: allow ApolloLake SoC to use FSP CAR InitBrenton Dong
FSP v2.0 Driver supports TempRamInit & TempRamExit APIs to initialize & tear down Cache-As-Ram. Add TempRamInit & TempRamExit usage to ApolloLake SoC when CONFIG_FSP_CAR is enabled. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: Ifd6fe8398ea147a5fb8c60076b93205bb94b1f25 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17063 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-19drivers/spi: fix flash writes at page boundariesAaron Durbin
There was an assumption that all SPI controllers could consume a full page of data to write. However, that assumption doesn't hold when spi_crop_chunk() indicates sizes smaller than page size. If the requested offset isn't page aligned from the start then writes will fail corrupting data since a page boundary isn't honored. The spansion driver needed quite a bit more work to honor the spi_crop_chunk() result. It now mimics the other driver's code. Also, needed to add spi_crop_chunk() to marvell/bg4cd SoC to make google/cosmos build. SPI obviously doesn't work on that platform, but it fixes the build error. Change-Id: I93e24a5a717adcee45a017c164bd960f4592ad50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17910 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-16samsung/exynos5420: Fix test for src < 0Patrick Georgi
It was unsigned, not a good place to be for testing < 0. Change-Id: I126fe86422900bbae2c3ca16052be27985cfed53 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1241911 Reviewed-on: https://review.coreboot.org/17888 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-12-16mediatek/mt8173: Check the right set of bits in USB controllerPatrick Georgi
Change-Id: Ic1d1b85a1d7e85b555a93b3a0b55fe310b26e34a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1353362 Reviewed-on: https://review.coreboot.org/17875 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-15soc/intel/common: provide option to invalide MRC cache on recoveryAaron Durbin
Allow a board/platform to invalidate the normal MRC cache when hardware retraining is requested in recovery mode. A small 4 byte payload is used to update the latest data written. It will of course fail on MRC cache retreival on next usage. BUG=chrome-os-partner:60592 BRANCH=reef Change-Id: Ic88cd66802664813562d003f50d54e4a4ea375ef Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17870 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-15soc/intel/apollolake: don't probe flash manuallyAaron Durbin
Rely on boot_device_spi_flash() to provide the spi_flash object. There's no need to duplicate the probing logic. BUG=chrome-os-partner:56151 BRANCH=reef Change-Id: I91900a3dfad7ba92cbd3b0ace77b08db04cff0b6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17867 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-15soc/intel/common: remove mrc cache assumptionsAaron Durbin
Update the mrc cache implementation to use region_file. Instead of relying on memory-mapped access and pointer arithmetic use the region_devices and region_file to obtain the latest data associated with the region. This removes the need for the nvm wrapper as the region_devices can be used directly. Thus, the library is more generic and can be extended to work on different boot mediums. BUG=chrome-os-partner:56151 Change-Id: Ic14e2d2f7339e50256b4a3a297fc33991861ca44 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17717 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-14soc/intel/broadwell/lpc.c: don't zeroize existing gnvs tableMatt DeVillier
The gnvs table only needs to be zeroized after init; zeroizing an existing/populated table renders all I2C devices completely non-functional. TEST: boot Linux and observe all I2C devices functional Change-Id: Id149ad645dfe5ed999a65d10e786e17585abc477 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17828 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-13rockchip: rk3399: change emmc clk to 148.5MHzZiyuan Xu
Set aclk_emmc and clk_emmc to 148.5MHz under hs400es mode, which could improve stability like kernel. CQ-DEPEND=CL:386527 BUG=chrome-os-partner:54377 BRANCH=none TEST=build and boot on kevin Change-Id: Iaa76d3ec1ab999eb317a9ab6c7e3525594b15b57 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e6eb1f56371aea51f2584a97bf817189d61090b2 Original-Change-Id: If4754d22e83a0f9a029fedca12f26ff5ae8d44e1 Original-Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/386865 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17790 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-13intel MMA: Enable MMA with FSP2.0Pratik Prajapati
- Separate mma code for fsp1.1 and fsp2.0 and restructuring the code - common code is placed in mma.c and mma.h - mma_fsp<ver>.h and fsp<ver>/mma_core.c contains fsp version specific code. - whole MMA feature is guarded by CONFIG_MMA flag. Change-Id: I12c9a1122ea7a52f050b852738fb95d03ce44800 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/17496 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11x86 SMM: Fix use with RELOCATABLE_RAMSTAGEKyösti Mälkki
The value for _size was not evaluated correctly if ramstage is relocated, make the calculation runtime. While touching it, move symbol declarations to header file. Change-Id: I4402315945771acf1c86a81cac6d43f1fe99a2a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08soc/intel/apollolake: Move privilege drop to later stageAndrey Petrov
Previously privilege drop was happening "too early" and that caused some PMC IPC programming (performed in FSP) to fail because sideband was already locked out. This change set moves privilege drop to later stage, after last FSP notify call. BRANCH=reef BUG=chrome-os-partner:60657 TEST=iotools rdmsr X 0x121, make sure they can't be read. Also dmesg|grep -i IPC to make sure there are no errors related Change-Id: Ia3a774aee5fbf92805a5c69093bfbd3d7682c3a7 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17769 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08soc/intel/apollolake: Set PL2 in RAPL registerSumeet Pawnikar
This patch sets the package power limit (PL2) value in RAPL register. BUG=chrome-os-partner:60535 TEST=Built, booted on reef and verified PL2 value. Change-Id: I83fe854cf3e9fc92ab87f84b86e64ebb6085065f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17699 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07soc/broadwell: set EM4/EM5 registers based on cdclkMatt DeVillier
The EM4/EM5 registers in the mini-HD audio device must be set based on the GPU cdclk value in order for HDMI audio to function properly. Add variables to save the correct values when initializing the GPU, and accessor functions to retrieve them in order to set the registers when initializing the mini-HD audio device. Change-Id: Icce7d5981f0b2ccb09d3861b28b843a260c8aeba Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17718 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-07soc/intel/apollolake: Use the new SPI driver interfaceFurquan Shaikh
1. Define controller for fast SPI. 2. Separate out functions that are specific to SPI and flash controller in different files. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully for reef. Change-Id: If07db9d27bbf4f4eb6024175cb7753c6cf4fb793 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17562 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-07soc/intel/skylake: Remove unwanted spi_release callFurquan Shaikh
Skylake uses a special SPI Flash controller and does not require spi_claim_bus and spi_release_bus functionality. This was a leftover call from earlier cleanup, so remove it. Change-Id: Iea260813cf72b94b7e7c661dbe494a74351dc357 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17729 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07soc/intel/skylake: Remove redundant BootLoaderTolumSize assignmentSubrata Banik
BootLoaderTolumSize FSP-M UPD is already initialized with cbmem_overhead_size() inside driver/fsp2_0/memory_init.c, hence remove the duplicate assignment. Change-Id: I0b1d9769cd2a863bf0547ce5f44928cacc5a63b6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17721 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07soc/mediatek/mt8173: Do not initialize static variables to 0Furquan Shaikh
Change-Id: Ibf0bd772bfdb3bbf6482a0ec9ff90a5c0a8945d2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17765 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Drop redundant loggingKyösti Mälkki
Resource is actually stored even before read_resources, but that's where we currently log this resource. For Intel, use PCI config register offset as the resource index, while AMD side uses MSR address. Change-Id: I6eeef1883c5d1ee5bbcebd1731c0e356af3fd781 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17696 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Consolidate resource registrationKyösti Mälkki
Change-Id: Id727270bff9e0288747d178c00f3d747fe223b0f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17695 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06rockchip/rk3399: sdram: use register to calculate sdram sizesLin Huang
We may support different sdram sizes on one board in future, so we need to calculate sdram sizes from sdram drvier. BRANCH=None BUG=None TEST=boot kevin Change-Id: I43e8f164ecdb768c051464b4dbc7d890df8055d0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c4d8b3cb647b2f9cebc416c298817c16d49330e Original-Change-Id: I95d5ef34de9d79ebca3600dc7a4b9e14449606ff Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/411600 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17629 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-06CPU: Declare cpu_phys_address_size() for all archKyösti Mälkki
Resource allocator and 64-bit PCI BARs will need it and PCI use is not really restricted to x86. Change-Id: Ie97f0f73380118f43ec6271aed5617d62a4f5532 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17733 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06PCI ops: Define read-modify-write routines globallyKyösti Mälkki
Change-Id: I7d64f46bb4ec3229879a60159efc8a8408512acd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17690 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: If62537475eb67b7ecf85f2292a2a954a41bc18d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17545 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: I943e354af0403e61263f1c780f02c7b463b3fe11 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17529 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06soc/lowrisc: Place CBMEM at top of autodetected RAMJonathan Neuschäfer
Change-Id: I9f169db330d1792128db7a6308ed3afbe5803c03 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17708 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06soc/marvell/mvmap2315: Fix integer arithmeticJonathan Neuschäfer
Replace logical with bitwise AND operator. Change-Id: I712fab61fbbc833fc2b2575948a875e2f07fd5de Reported-by: Coverity (CID 1362808) Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17401 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06soc/ucb/riscv: Place CBMEM at top of autodetected RAMJonathan Neuschäfer
Change-Id: Ida016aec11ccdb8da8d2ae1d30ddca16b069be11 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17595 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06spi_flash: Make a deep copy of spi_slave structureFurquan Shaikh
Commit 36b81af (spi: Pass pointer to spi_slave structure in spi_setup_slave) changes the way spi_setup_slave handles the spi_slave structure. Instead of expecting spi controller drivers to maintain spi_slave structure in CAR_GLOBAL/data section, caller is expected to manage the spi_slave structure. This requires that spi_flash drivers maintain spi_slave structure and flash probe function needs to make a copy of the passed in spi_slave structure. This change fixes the regression on Lenovo X230 and other mainboards. Change-Id: I0ad971eecaf3bfe301e9f95badc043193cc27cab Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17728 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Iru Cai <mytbk920423@gmail.com>
2016-12-05rockchip/rk3399: display: Update edp initialization retryMartin Roth
Follow on patch to clean up the previous retry code. Previous patches: coreboot commit 079b5c65 (rockchip/rk3399: display: Retry edp initialization if it fails) cros commit 28c57a6e (rockchip/rk3399: display: retry edp initialization if edp initial fail) - Reduce the jumping around via goto statements - Break the retry code out into a separate function that also prints the error messages. BRANCH=gru BUG=chrome-os-partner:60150 TEST=Rebuild Kevin and Gru Change-Id: I3b6cf572073e4dcac83da09621bafde179af2613 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17642 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-04spi_flash: Move spi flash opcodes to spi_flash.hFurquan Shaikh
BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I3b6656923bb312de470da43a23f66f350e1cebc7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17680 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-03rockchip/rk3399: Fix typoPatrick Georgi
TRAINING, not TARINING. BUG=none BRANCH=none TEST=still builds Change-Id: I8b7ffd0f0544a58865865a8b09d9c153db9c2674 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b1ea846ce1ffd654d7d34c2a1d43b0fddbd4ae32 Original-Change-Id: I4940279ed7217cc20fe29c8b3603d1853acbfc5e Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/411801 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/17677 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-02soc/intel/common: Add suppport for Extended VBTAbhay Kumar
With addition of new features in VBT its size got increased more than 6k and was unable to pass using mailbox 4 hence pass using mailbox 3 to kernel. BRANCH=none BUG=chrome-os-partner:60026 TEST=firmware screen and Chrome OS screen should come up. Change-Id: I359cf9bc402881161c9623cada689496716e04a5 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/17585 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-02soc/intel/apollolake: Drop privilege level to IA_UNTRUSTEDAndrey Petrov
As per guidelines CPU security level should be dropped before OS start, so that certain MSRs are locked out. Drop privilege levels on all logical CPUs. BUG=chrome-os-partner:60454 TEST=iotools rdmsr x 0x120, make sure bit 6 is set, rdmsr x 0x121 results in io error. Change-Id: I67540f6da16f58b822db9160d00b7a5e235188db Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17665 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-02soc/intel/apollolake: Enable ACPI PM timer emulation on all CPUsAndrey Petrov
Currently we enable ACPI PM timer emulation only on BSP. So the timer doesn't work on other cores and that breaks OSes that use it. Also, microcode uses this information to figure out ACPI IO base, and that is used for other features. This patch enables ACPI timer emulation on all the logical CPUs. BUG=chrome-os-partner:60011 TEST=iotools rdmsr x 0x121, x={0..3}, make sure it is set Change-Id: I0d6cb8761c1c25d3a2fcf59a49c1eda9e4ccc70c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17663 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-01lib/nhlt: add support for setting the oem_revisionAaron Durbin
In the ACPI header there's an OEM revision field that was previously just being implicitly set to 0. Allow for a board to provide a non-zero value for this field. Change-Id: Icd40c1c162c2645b3990a6f3361c592706251f82 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17650 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-01lib: put romstage_handoff implementation in own compilation unitAaron Durbin
Instead of putting all the functions inline just put the current implementation into a C file. That way all the implementation innards are not exposed. Lastly, fix up the fallout of compilation units not including the headers they actually use. Change-Id: I01fd25d158c0d5016405b73a4d4df3721c281b04 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17648 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-01romstage_handoff: add helper to determine resume statusAaron Durbin
Instead of having callers query the romstage handoff resume status by inspecting the object themselves add romstage_handoff_is_resume() so that the same information can be queried easily. Change-Id: I40f3769b7646bf296ee4bc323a9ab1d5e5691e21 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17647 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-01romstage_handoff: remove code duplicationAaron Durbin
The same pattern was being used throughout the code base for initializing the romstage handoff structure. Provide a helper function to initialize the structure with the S3 resume state then utilize it at all the existing call sites. Change-Id: I1e9d588ab6b9ace67757387dbb5963ae31ceb252 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17646 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-30soc/intel/skylake: Pass proper CPU flex ratio override to FSPNaresh G Solanki
In bootblock, cpu flex ratio is set to non-turbo max. In FSP UPD, if CpuRatioOverride is zero, then it tries to program cpu ratio to zero. Since it is different than the non-zero value programmed in bootblock, FSP gives reset. To avoid the reset, set FSP UPD for CPU flex ratio override to that value as set in bootblock. Change-Id: I8cae5530ec97cedfbd71771f291db6f55a9fd5c2 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17555 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/skylake: Fix top_of_ram calculationNaresh G Solanki
FSP 2.0 implementation conditionally sets PMRR base based on EnableC6Dram UPD. Therefore, handle the case of the PMRR base not being set since FSP 2.0 changed behavior from FSP 1.1 implementation. If prmrr base is non-zero value, then top_of_ram is prmrr base. If Probeless trace is enabled, then deduct trace memory size from calculated top_of_ram. Change-Id: I2633bf78705e36b241668a313d215d0455fba607 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17554 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/skylake: Use SendVrMbxCmd1 for FSP 2.0Rizwan Qureshi
In FSP 2.0 the UPD to send extra VR Mailbox commands is switched from SendVrMbxCmd to SendVrMbxCmd1. Use the same in silicon initialization. Change-Id: I46bd50c9acc0456e2483f20ccb5e9ec2a0de232a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/17578 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/skylake: Move IO decode range out from pch_lpc_initTeo Boon Tiong
1. Move existing IO decode range from pch_lpc_init to early stage before SIO init. 2. At the same time, enable SIO decode range (0x2e/0x2f) for platform which use super IO. Change-Id: I72df16d0a784686d8cadfbee09b5aef60576ac43 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17337 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/skylake: Remove pad configuration size hardcodingSubrata Banik
Existing GPIO driver inside coreboot use some hardcoded magic number to calculate gpio pad offset. Avoid this kind of hardcoding. Change-Id: I6110435574b141c57f366ccb1fbe9bf49d4dd70a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17571 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/skylake: Disable Legacy PME for Root portsNaresh G Solanki
Legacy PME are enabled by default in FSP UPD region. When Legacy PME is enabled, then an SCI is generated and should be handled by OS and BIOS/Coreboot in collboration. OS requires some ACPI methods (eg _L69) which help to determine the wake source and also to clear some registers. But this infrastructure is not present as of now in coreboot and also linux handles PMEs natively. Hence the SCI was never handled by OS and the status bits were never cleared i.e., PCI_EXP_STS. For this reason the level triggered SCI will remain active and the system will wake up as soon as it enters S3. To fix this, diabled Legacy PME (PmSci for Root ports). Change-Id: I61317eb45305bdb14be3cc1a54fd9961d6ed593e Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17553 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/apollolake: Add save/restore variable MRC cacheAndrey Petrov
Apollolake MRC cache is divided into two regions: constant and variable. Currently they are clubbed together. Since variable data changes across cold reboot it triggers invalidation of the whole cache region. This change declubs the data, adds routines to load/store variable data on flash. BUG=chrome-os-partner:57515 TEST=with patch series applied: cold reboot, make sure MRC is not updated. Do S3 suspend/resume cycle. Change-Id: I374519777abe9b9a1e6cceae5318decd405bb527 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17237 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/common: Add save/restore for variable MRC dataAndrey Petrov
Piggy-back on existing MRC cache infrastructure to store variable MRC data. Only one set of data can be valid at given point of time. Currently this magically happens because region alignment is forced to 0x1000 and region itself is of the same size. This needs to be somehow programmatically enforced. Change-Id: I8a660d356ca760b8ff9907396fb9b34cb16cf1db Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17320 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30driver/intel/fsp2_0: Add version parameter to FSP platform callbackAndrey Petrov
Change-Id: Ibad1ad6bb9eedf2805981623e835db071d54c528 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17497 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-29rockchip/rk3399: display: Retry edp initialization if it failsLin Huang
We found that sometimes the edp doesn't get the edid or that video config fails on kevin after a reboot. Now we will retry 3 times to initialize it if there are errors. BRANCH=gru BUG=chrome-os-partner:60150 TEST=reboot kevin, the edp initialization error is no longer seen. Change-Id: I96e20e526294fbc856fbdffcbd63accdc7371ef6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 28c57a6e5b89c7b3a96204ec19a080067460544a Original-Change-Id: I1382cdf4119fc4eeae5c2b36485030e3a38c2d91 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/412622 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17626 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-29intel/sch: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Forgot to actually "flip the bit" in commit ebc21d1 intel/sch: Switch to MMCONF_SUPPORT_DEFAULT Change-Id: Ic095594acb08bae17a6443bc302eb8bfb1ce2083 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17640 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-28soc/intel/skylake: Add USB Port Over Current (OC) Pin programmingSubrata Banik
Program USB Overcurrent pins as per board schematics definition. BUG=none BRANCH=none TEST=Build and boot kunimitsu from USB device. Change-Id: I6aeb65953c753e09ad639469de7d866a54f42f11 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17570 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 01:26:53 +0000