summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Expand)Author
2016-02-26soc/intel/appollolake: fix comment in gpio_defs.hAaron Durbin
2016-02-26soc/intel/apollolake: group serial console options into one KconfigAaron Durbin
2016-02-25fsp_baytrail: Fix a possible hanging DisplayPortWerner Zeh
2016-02-22urara: Increase bootblock sizeJulius Werner
2016-02-22soc/intel/quark: Add the initial pieces required for ACPI tablesLee Leahy
2016-02-22fsp_baytrail: Add full support for iosf access in reg_scriptWerner Zeh
2016-02-21soc/*: fix uart's regwidth specification in cbtablesPatrick Georgi
2016-02-19soc/intel/quark: Use single ID value for HSUART1Lee Leahy
2016-02-18soc/intel/quark: Enable HSUART1Lee Leahy
2016-02-18soc/intel/quark: Establish the Memory MapLee Leahy
2016-02-18soc/intel/quark: Enumerate the PCI devicesLee Leahy
2016-02-16soc/intel/apollolake: bootblock: implement platform_prog_run()Andrey Petrov
2016-02-15skylake: Finalize SMM in corebootDuncan Laurie
2016-02-15skylake: Check for power failure when WAK_STS is not setDuncan Laurie
2016-02-15skylake: Enable DDI-A 4-lane support if GOP does not executeDuncan Laurie
2016-02-15skylake: acpi: Make GRXS method serializedDuncan Laurie
2016-02-13soc/intel/apollolake: add assert for pad constraintsAaron Durbin
2016-02-13soc/intel/apollolake: pre-evaluate gpio number valuesAaron Durbin
2016-02-13soc/intel/apollolake: limit bootblock size to 32KiBAaron Durbin
2016-02-12tegra132/pistachio: Increase romstage size in memlayout.ldJulius Werner
2016-02-12tegra132/210: Remove memlayout_vboot2.ldJulius Werner
2016-02-12timestamp: Remove HAS_PRECBMEM_TIMESTAMP_REGION KconfigJulius Werner
2016-02-11arches: lib: add main_decl.h for main() declarationAaron Durbin
2016-02-11soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLEAndrey Petrov
2016-02-11soc/apollolake: Add minimal GPIO driverAndrey Petrov
2016-02-11soc/apollolake: Add initial cache-as-ram setup for bootblockAlexandru Gagniuc
2016-02-11util/marvell: Add Marvell doimage utility and dependency in relevant MakefileRuilin Hao
2016-02-10Kconfig: Move defaults for CBFS_SIZEMartin Roth
2016-02-10soc/intel/quark: Report CPU infoLee Leahy
2016-02-10soc/intel/quark: Call FSP SiliconInitLee Leahy
2016-02-10soc/intel/quark: MTRR supportLee Leahy
2016-02-10soc/fsp_baytrail: Add support for FSP MR 005Ben Gardner
2016-02-10soc/intel/quark: FSP MemoryInit SupportLee Leahy
2016-02-09rockchip/rk3288: UART uses 32bit wide registersPatrick Georgi
2016-02-09intel/skylake: Add gpio macro for unused GPIO pinsdavid
2016-02-09soc/intel/quark: Enable Serial PortLee Leahy
2016-02-09nhlt: add api to override oem_id and oem_table_id of acpi_header_tFang, Yang A
2016-02-09chromeos: Remove CONFIG_VBNV_SIZE variableDuncan Laurie
2016-02-08soc/intel/quark: Add TempRamInit supportLee Leahy
2016-02-08soc/intel/quark: Enable ESRAMLee Leahy
2016-02-04intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdownArchana Patni
2016-02-04intel/skylake: unconditionally set SPI controller BARAaron Durbin
2016-02-04intel/skylake: implement vboot_platform_prepare_reboot()Aaron Durbin
2016-02-04intel/skylake: implement vboot_platform_is_resuming()Aaron Durbin
2016-02-04intel/skylake: Display ME firmware status before os bootDhaval Sharma
2016-02-04soc/intel/quark: Add minimal Quark SoC X1000 filesLee Leahy
2016-02-04soc/marvell/armada38x: Add i2c driver for armada38xRuilin Hao
2016-02-04soc/marvell/armada38x: Add gpio driver for armada38xRuilin Hao
2016-02-04soc/marvell/armada38x: Add spi driver for armada38xRuilin Hao
2016-02-04soc/marvell/armada38x: Add generic support for armada38xRuilin Hao
2016-02-02soc/intel/common: Use SoC specific routine to read/write MTRRsLee Leahy
2016-02-02Kconfig: indent with tabs, not spaces.Martin Roth
2016-01-31drivers/intel/fsp1_1: Fix spelling error in API and copyrightLee Leahy
2016-01-30soc/intel: Add skeleton infrastructure for Apollolake SOCAlexandru Gagniuc
2016-01-29soc/braswell: Fix Global NVS base addressHannah Williams
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
2016-01-29intel/skylake: Implement native Cache-as-RAM (CAR)Subrata Banik
2016-01-28soc/braswell: Add interface to program USB2_COMPBG registershkim
2016-01-28soc/braswell/acpi/DPTF: Write TCHG state on AC connect.Jenny TC
2016-01-28soc/braswell/acpi: Fix CID1 offset in commentHannah Williams
2016-01-28soc/braswell: Fix issues found during static code analysisRavi Sarawadi
2016-01-28Braswell: Separate L1 Sub State init procedure for boards.Kenji Chen
2016-01-28Strago: Enable CA MirrorShobhit Srivastava
2016-01-28soc/braswell: Disable SD card detect simulation in FSPDivya Sasidharan
2016-01-28soc/braswell: Set max frequency to be turbo frequencyHannah Williams
2016-01-28soc/braswell: Fix DSP clockfdurairx
2016-01-28drivers/intel/fsp1_1: Remove extra include referencesLee Leahy
2016-01-27soc/braswell: Fix leakage on V1P8S railShobhit Srivastava
2016-01-27soc/braswell: Add macro NATIVE_INT_PU20KHannah Williams
2016-01-26Braswell: Implement Gpio library functions to read RAMIDSubrata Banik
2016-01-22mediatek/mt8173: revise cbmem_topCC Ma
2016-01-22mediatek/mt8173: move rtc_boot() to romstageYidi Lin
2016-01-22mediatek/mt8173: Add usb phy driverChunfeng Yun
2016-01-22mediatek/mt8173: pll: Add API for enabling USB 3.0 phy reference clockChunfeng Yun
2016-01-22mediatek/mt8173: configure audioKoro Chen
2016-01-22mediatek/mt8173: add APLL clock settingKoro Chen
2016-01-22mediatek/mt8173: Add mtcmos power-on control for audio and displayCC Ma
2016-01-22mediatek/mt8173: Add RTC driverTianping Fang
2016-01-22mediatek/mt8173: Add I2C driverLiguo Zhang
2016-01-22mediatek/mt8173: Add MMU supportJimmy Huang
2016-01-22mediatek/mt8173: Add gen-bl-img.py for mt8173 bootblock codeYidi Lin
2016-01-22mediatek/mt8173: Add support for verstageItamar
2016-01-22mediatek/mt8173: add watchdog driverItamar
2016-01-22mediatek/mt8173: Add SPI supportLeilk Liu
2016-01-22soc/braswell: Add method for Wifi regulatory domainFelix Durairaj
2016-01-22intel/skylake: Fix klockwork violationNaresh G Solanki
2016-01-22intel/skylake: Thermal Design Power PL1 and PL2 Config Changespchandri
2016-01-21intel/skylake: remove third paragraph of license headerMartin Roth
2016-01-21broadwell: gpio.asl: Make GWAK method serializedDuncan Laurie
2016-01-19Braswell: add code to support customization of I2C data hold timeKane Chen
2016-01-19intel/skylake: Fix issues found by klockworkNaresh G Solanki
2016-01-19intel/skylake: Adding provision to set voltages to the I2C portsNaresh G Solanki
2016-01-19intel/skylake: Disable SaGv in recovery modeharidhar
2016-01-19soc/braswell: Remove the unneccessary functions from pcie.cShaunak Saha
2016-01-19intel/skylake: Add support for IV feedback loop capture blobSathya Prakash M R
2016-01-18intel/skylake: Change in UPD name from SkipMpInit to FspSkipMpInitBarnali Sarkar
2016-01-18intel/skylake: Remove unused devicetree configuration variablesDuncan Laurie
2016-01-18intel/skylake: provide default VR configurationAaron Durbin
2016-01-18intel/skylake: Add devicetree setting for DDR frequency limit UPDDuncan Laurie
2016-01-18intel/skylake: Add elog event for THERMTRIPDuncan Laurie