| Age | Commit message (Collapse) | Author |
|---|
|
This patch currently contains common CAR initialization
required in bootblock phase along with common MSR header -
1. Use SOC_INTEL_COMMON_BLOCK_CAR to have common CAR initialization
and CAR teardown.
2. Use common MSR header "intelblocks/msr.h" inside soc/cpu.h
Change-Id: I67f909f50a24f009b3e35388665251be1dde40f7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18555
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Create sample model for common car init and teardown programming.
TEST=Booted Reef, KCRD/EVE, GLKRVP with CAR_CQOS, CAR_NEM_ENHANCED
and CAR_NEM configs till post code 0x2a.
Change-Id: Iffd0c3e3ca81a3d283d5f1da115222a222e6b157
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18381
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
soc/intel/fsp_baytrail.
Change-Id: I2791346289c04049e6f032c8e120e4be9ba6657f
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/17319
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Also move all local variable declaration at starting of function
block.
Change-Id: I774485a23b4b7d96a8dbd837da45553251dff3b0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18949
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Make skylake cache as ram SPI mapped MTRR programming
align with apollolake code.
Change-Id: I87a5c655da8ff5f6d8ef86907b7ae2263239b1ac
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18923
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch implements SGX initialization steps in coreboot per Intel SGX
BWG rev 2.0.8 for Kaby Lake SoC. If enabled on a Kabylake device, SoC
capability and PRM (processor reserved memory) of desired size (needs to
be configured through PrmrrSize) are provisioned for later software
stack to use SGX (i.e., run SGX enclaves).
One issue is still puzzling and needs to be addressed: by calling
configure_sgx() in cpu_core_init() which is the per-thread function, SGX
is always failing for thread 0 but is successful for other 3 threads.
I had to call configure_sgx() again from soc_init_cpus() which is the
BSP-only function to make it enable on the BSP.
Another pending work is the implementation for the Owner Epoch update
which shall be added later.
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Tested on Eve, verified SGX activation is successful on all threads.
Change-Id: I8b64284875eae061fa8e7a01204d48d320a285a9
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18445
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP disables host access to shadowed PMC XRAM registers by default,
it also provides a UPD to enable/disable host reads to these regiters.
Expose the same in devicetree as a config option.
Change-Id: Iaa33aa3233bda4f050da37d1d8af0556311c9496
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18319
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add configs for enabling Intel TraceHub and DCI for aid in debugging.
Change-Id: Ic40f9499c0125070049856e242e89024ca5a1c4e
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18791
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I5947170a96e888cea2f3faac92355e72b63c1fef
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18735
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Extract SMBIOS memory information from FSP SMBIOS_MEM_INFO_HOB
and use common function dimm_info_fill() to save it in CBMEM.
BUG=chrome-os-partner:61729
BRANCH=none
TEST=Build and boot Reef to verify the type 17 DIMM info coming in
SMBIOS table from Kernel command "dmidecode".
Change-Id: I33c3a0bebf33c53beadd745bc3d991e1e51050b7
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/18451
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
Fix the following error and warnings detected by checkpatch.pl:
ERROR: switch and case should be at the same indent
WARNING: line over 80 characters
WARNING: storage class should be at the beginning of the declaration
WARNING: adding a line without newline at end of file
WARNING: __func__ should be used instead of gcc specific __FUNCTION__
WARNING: Comparisons should place the constant on the right side of the test
TEST=None
Change-Id: I85c400e4a087996fc81ab8b0e5422ba31df3c982
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18885
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix the following errors and warnings detected by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: return is not a function, parentheses are not required
ERROR: do not use assignment in if condition
ERROR: trailing statements should be on next line
WARNING: else is not generally useful after a break or return
WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
TEST=None
Change-Id: I9414341b0c778c252db33f0ef4847b9530681d96
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18884
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Fix the following issue detected by checkpatch:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
TEST=None
Change-Id: Iae22e724b6adae16248db7dc8f822f65bfadae5f
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18873
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Fix the following errors and warnings detected by checkpatch.pl:
ERROR: code indent should use tabs where possible
ERROR: space required after that ',' (ctx:VxV)
ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: spaces required around that '<=' (ctx:WxV)
ERROR: spaces required around that '<=' (ctx:VxV)
ERROR: spaces required around that '>' (ctx:VxV)
ERROR: spaces required around that '>=' (ctx:VxV)
ERROR: spaces required around that '+=' (ctx:VxV)
ERROR: spaces required around that '<' (ctx:VxV)
ERROR: "foo * bar" should be "foo *bar"
ERROR: "foo* bar" should be "foo *bar"
ERROR: "(foo*)" should be "(foo *)"
ERROR: space required before the open parenthesis '('
WARNING: space prohibited between function name and open parenthesis '('
WARNING: please, no space before tabs
WARNING: please, no spaces at the start of a line
False positives are generated for the following test:
WARNING: space prohibited between function name and open parenthesis '('
in both pei_data.h and pei_wrapper.h
TEST=None
Change-Id: Icab08e5fcb6d5089902ae5ec2aa5bbee5ac432ed
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18872
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
eMMC Controller is taking over 100ms to resume during runtime which
results in I/O latency issues on the Apollo Lake system such as Snappy.
The cause is the Linux Kernel setting the firmware reset time to
100 ms by default.
This patch adds _DSM method for eMMC comtroller for specifying the
device readiness durations. Function index 9 returns package of five
integers to set D3 cold delay to zero and ACPI constant Ones for the
elements where overriding the default values is not desired.
BUG=b:35774937
BRANCH=none
TEST=update snappy coreboot and test i/o latency is under 100ms
Signed-off-by: Zhuo-hao Lee <zhuo-hao.lee@intel.com>
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Change-Id: Idcfe4252b20bead15c2e5b9cb000ff797295f06a
Reviewed-on: https://review.coreboot.org/18806
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Fix the following errors and warnings detected by checkpatch.pl:
ERROR: that open brace { should be on the previous line
ERROR: return is not a function, parentheses are not required
WARNING: braces {} are not necessary for any arm of this statement
WARNING: line over 80 characters
WARNING: braces {} are not necessary for single statement blocks
WARNING: Avoid unnecessary line continuations
WARNING: break is not useful after a goto or return
WARNING: else is not generally useful after a break or return
False positives are generated by checkpatch for the following test:
ERROR: Macros with complex values should be enclosed in parentheses
TEST=Build for cyan
Change-Id: I19048895145b138a63100b29f829ff446ff71b58
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18871
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
TEST=Build for cyan
Change-Id: Ib5c6a1bf5308a8add42d7371854b80ea53d7ae84
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18870
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Fix the following errors and warnings detected by checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
ERROR: space prohibited before that ',' (ctx:WxE)
ERROR: spaces required around that '=' (ctx:WxV)
ERROR: code indent should use tabs where possible
WARNING: space prohibited between function name and open parenthesis '('
WARNING: please, no spaces at the start of a line
TEST=Build for cyan
Change-Id: I84d4204585b498b695608c5008fdfb7961e2416f
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18869
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Fix the following errors and warnings detected by checkpatch.pl:
ERROR: code indent should use tabs where possible
ERROR: Macros with complex values should be enclosed in parentheses
ERROR: "foo * bar" should be "foo *bar"
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that '=' (ctx:VxW)
WARNING: space prohibited between function name and open parenthesis '('
WARNING: storage class should be at the beginning of the declaration
WARNING: char * array declaration might be better as static const
WARNING: please, no space before tabs
WARNING: braces {} are not necessary for single statement blocks
WARNING: else is not generally useful after a break or return
WARNING: static const char * array should probably be static const char * const
TEST=Build for glados
Change-Id: Ic14ca3abd193cfe257504a55ab6b74782b26bf6d
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18868
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Fix the following warning detected by checkpatch:
WARNING: line over 80 characters
TEST=Build for glados
Change-Id: I79341f46ca06ac052f987975ccaf975470d27806
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18867
Tested-by: build bot (Jenkins)
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
TEST=Build for glados
Change-Id: Idc2ad265e8ed8cd7fd6d228cfbe4cbbcb9d3ebfc
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18866
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add options to set the AC and DC loadline values for each supported
VR type so these can be tuned on a per-board basis in devicetree.cb.
BUG=b:36228330
BRANCH=none
TEST=Build and boot on Eve and check debug FSP output to ensure that
it is applying the provided loadline values
Change-Id: I2a5533d2c9fd86351c86584e3738e80ac4c1f915
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18819
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
With the move to FSP 2.0 the number of VR types supported was
reduced to 4, and the VR_RING type is no longer present.
This means all existing boards using FSP 2.0 are incorrectly
passing VR configuration into FSP as the values corresponding to
"GT Sliced" and "GT Unsliced" have changed.
Fix this by updating the skylake SOC VR handling to account for
changes in the FSP configuration and no longer provide VR_RING
type when using FSP 2.0.
BUG=b:36228330
BRANCH=none
TEST=manual: build and boot on Eve
Change-Id: I59eea9fba006a4c235d7b42d07fdc6e4f44f7351
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18818
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Add support for describing the NHLT blob for the rt5514 DSP.
Currently this only supports 4 channel capture.
BUG=b:35585307
BRANCH=none
TEST=build and boot on Eve P1
Change-Id: Ib59b56222f9aa65370fdcf9ddf25145c571b1b2e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18816
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Always read the rmu.bin file from the read-only section of the SPI
flash. Without this change vboot attempts to read this file from the
A or B section of the flash.
TEST=Build and run on Galileo Gen2
Change-Id: Ied8eaa2cd37645bf401aa957936943946bfd6182
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18803
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix the following error detected by checkpatch.pl:
ERROR: code indent should use tabs where possible
TEST=Build and run on Galileo Gen2
Change-Id: Ief4b96073b3df30e45bf5d802ca3b190e7f431a7
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18753
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since asking CSE to read FPF status turned out to be slow in some
cases, cache and save returned value on first boot only. Value is
read from flash on consequent boots.
BUG=b:35586975
BRANCH=reef
TEST=boot twice, make sure cached FPF status is loaded from
flash the second time.
Change-Id: I6e56a35407c9097616ccb05a557fded7b639c88a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/18774
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix build error with FSP 1.1. Pass the S3 wake status to
fsp_silicon_init.
TEST=Build and run on Galileo Gen2
Change-Id: I78150f737321db5b1b4d63b411fa6432ac30d080
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18805
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add ESRAM display to FSP 1.1
TEST=Build and run on Galileo Gen2
Change-Id: Ia47b0bdba65606a7f0695332d298fc1e910b0e2f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18804
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Return NULL for top_of_memory when the register has not been set.
TEST=Build and run on Galileo Gen2
Change-Id: If79cac68c2a64aa9bf3be72d3cfc4c73fceef12b
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18802
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Extract SMBIOS memory information from FSP SMBIOS_MEM_INFO_HOB
and save it in CBMEM.
BUG=chrome-os-partner:61729
BRANCH=none
TEST=Build and boot KBLRVP to verify the type 17 DIMM info coming in
SMBIOS Table from Kernel command "dmidecode".
Change-Id: I593d4ccb0d4866e99913a73c49b2f000b51827d1
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18275
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add the files to support verstage for vboot.
TEST=Build and run on Galileo Gen2
Change-Id: Icf87075012c08cf581c17d579e0763888c707265
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18040
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: line over 80 characters
TEST=Build for reef
Change-Id: I4fbe95037ca4b52e64ba37e5c739af4a03f64feb
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18728
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following errors and warnings detected by checkpatch.pl:
ERROR: switch and case should be at the same indent
ERROR: do not use assignment in if condition
WARNING: Statements terminations use 1 semicolon
WARNING: unnecessary whitespace before a quoted newline
WARNING: else is not generally useful after a break or return
TEST=Build for reef
Change-Id: I5486936dbf19b066c76179d929660affa1da5f16
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18727
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error and warning detected by checkpatch.pl:
ERROR: inline keyword should sit between storage class and type
WARNING: storage class should be at the beginning of the declaration
TEST=Build for reef
Change-Id: I2ed418cc3b4a989eb1101013944169429bf147c2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18726
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following errors and warning detected by checkpatch.pl:
ERROR: space required before the open parenthesis '('
ERROR: space prohibited before that close parenthesis ')'
ERROR: return is not a function, parentheses are not required
WARNING: space prohibited between function name and open parenthesis '('
TEST=Build for reef
Change-Id: I31f854adf3269ba6f77c4044fb3748bb1957841c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18725
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
TEST=Build for reef
Change-Id: Ifc45ce90d466d087cd20af72ddfc8486d2f1492c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18724
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warnings detected by checkpatch.pl:
WARNING: braces {} are not necessary for any arm of this statement
WARNING: braces {} are not necessary for single statement blocks
TEST=Build for reef
Change-Id: Ifab09c023faa7da215945f1aedd391f4b2a1a04c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18723
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error and warnings detected by checkpatch.pl:
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
WARNING: please, no space before tabs
TEST=Build for reef
Change-Id: Id7a758463b95274c5e8bbdd67da0955f1ae78aac
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18721
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following errors detected by checkpatch.pl:
ERROR: spaces required around that '==' (ctx:VxO)
ERROR: space required before that '-' (ctx:OxV)
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: spaces required around that '=' (ctx:WxV)
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: need consistent spacing around '+' (ctx:VxW)
ERROR: space prohibited before that '++' (ctx:WxB)
ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: space required after that ',' (ctx:VxV)
TEST=Build for reef
Change-Id: I37265a69fcb14fbf7c182ef29d823f70a5748ad8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18720
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following errors detected by checkpatch.pl:
ERROR: "foo * bar" should be "foo *bar"
ERROR: "(foo*)" should be "(foo *)"
TEST=Build for reef
Change-Id: I4a762d8fa762057a06e601dfed10538adc5d8bc8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18719
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error detected by checkpatch.pl:
ERROR: open brace '{' following function declarations go on the next line
TEST=Build for reef
Change-Id: Icb92dc49c6e7b8dfea60bc0395f3db7316c4e34c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18722
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error detected by checkpatch.pl:
ERROR: return is not a function, parentheses are not required
TEST=Build and run on Galileo Gen2
Change-Id: Idf7723d4fd48124a26bbb626afc310820f859f66
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18757
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Fix the following warning detected by checkpatach.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
TEST=Build and run on Galileo Gen2
Change-Id: Ic266c077eb115e0c7d934c15bcc4cc9b9e530a39
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18756
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Fix the following errors detected by checkpatch.pl:
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: spaces required around that ':' (ctx:VxW)
ERROR: space required after that ',' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: switch and case should be at the same indent
ERROR: "foo ** bar" should be "foo **bar"
TEST=Build and run on Galileo Gen2
Change-Id: I52ba2a3c1e0fffad7145eecd878aba8dc450ac0b
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18755
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Fix the following error detected by checkpatch.pl:
ERROR: code indent should use tabs where possible
TEST=Build and run on Galileo Gen2
Change-Id: I61c4f01216cb6c788cf6da988c414bbb9648d502
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18754
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In strncpy() function of dimm_info_fill(), the minimum possible size
of Module Part Number of DIMM is passed as argument.
BUG=chrome-os-partner:61729
BRANCH=none
TEST=Build and boot KBLRVP to verify the type 17 DIMM info coming in
SMBIOS Table from Kernel command "dmidecode".
Change-Id: Icc7667149eae9705b91e271628af1b443eb8556e
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/18617
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
CDClk selection was wrong in some corner cases (e.g. ULX SKUs) and,
for Broadwell, never took the devicetree config into account.
Rewrite the selection with the following in mind:
o cpu_is_ult() might return `true` for ULX SKUs, too,
o ULX and Broadwell-ULT SKUs can be `overclocked` with additional
cooling, so leave that as devicetree option.
For Haswell, the following frequency selections are valid:
o ULX: 337.5MHz by default, 450MHz optional
o ULT: 450MHz only (maybe 337.5MHz too, documentation varies,
it wasn't selectable before either)
o others: 540MHz by default, 450MHz optional
For Broadwell:
o ULX: 450MHz by default, 337.5MHz / 540MHz optional
o ULT: 540MHz by default, 337.5MHz / 450MHz / 675MHz optional
o others: 667MHz by default, 337.5MHz / 450MHz / 540MHz optional
Side effects: A too high setting in the devicetree results in the
highest possible frequency now, Haswell non-ULT/ULX defaults to 540MHz
instead of 450MHz.
Change-Id: Iec12752f2a47bf4a5ae6077c75790eae9378c1b2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17768
Tested-by: build bot (Jenkins)
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
eMMC Controller is taking over 100ms to resume during runtime which
results in I/O latency issues on the Skylake systems like Cave and Caroline.
This patch adds _DSM method for eMMC comtroller for specifying the
device readiness durations. Function index 9 returns package of five
integers to set D3 cold delay to zero and ACPI constant Ones for the
elements where overriding the default values is not desired.
BUG=b:35774937
BRANCH=none
TEST=update caroline coreboot and test i/o latency is under 100ms
Change-Id: Iacc8aa8560897da8770fe559ca8cd17aaf6ebeba
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/18532
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This implements dynamic generation of sdcard GpioInt in SSDT.
GpioInt in SSDT generation is based on the card detect GPIO if
it is provided by the mainboard in devicetree.
This implements GNVS variable to store the address of sdcard cd pin.
GNVS used to store rxstate of the sdcard cd pin to get card presence.
Add _PS0/_PS3 methods to power gate the sd card controller in
S0ix and runtime PM.
CQ-DEPEND=448173
BUG=chrome-os-partner:63070
TEST=Suspend and resume using 'echo freeze > /sys/power/state'.
System should enter S0ix and resume with no issue.
Change-Id: Id2c42fc66062f0431385607cff1a83563eaeef87
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/18496
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
|
|
Add two GPIO macros:
1. PAD_CFG_GPI_APIC_EDGE allows a pin to be route to the
APIC with input assuming the events are edge triggered.
2. PAD_CFG_GPI_ACPI_SCI_LEVEL to route the general purpose
input to SCI assuming the events are level triggered.
Change-Id: I944a9abac66b7780b2336148ae8c7fa3a8410f3f
Signed-off-by: Rahul Kumar Gupta <rahul.kumarxx.gupta@intel.com>
Reviewed-on: https://review.coreboot.org/18533
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add SKL/KBL PCH-H GPIO settings referring from SKL PCH-H
specifications to support sklrvp11.
Split the gpio_defs.h into headers gpio_pch_h_defs.h and
gpio_soc_defs.h for PCH-H specific and SOC specific GPIO
defs respectively.
Change-Id: I5eaf8d809a1244a56038cbfc29502910eb90f9f2
Signed-off-by: Li Cheng Sooi <li.cheng.sooi@intel.com>
Signed-off-by: Rahul Kumar Gupta <rahul.kumarxx.gupta@intel.com>
Reviewed-on: https://review.coreboot.org/18027
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Apollolake platform comes with FPF (field-programmable-fuses). FPF can
be blown only once, typically at the end of the manufacturing process.
This patch adds code that sends a request to CSE to figure out if FPFs
have already been blown.
Change-Id: I9e768a8b95a3cb48adf66e1f17803c720908802d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/18604
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If866453f06220e0edcaa77af5f54b397ead3ac14
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/18603
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add common driver that can send/receive HECI messages. This driver is
inspired by Linux kernel mei driver and somewhat based on Skylake's.
Currently it has been only tested on Apollolake.
BUG=b:35586975
BRANCH=reef
TEST=tested on Apollolake to send single messages and receive both
fragmented and non-fragmented versions.
Change-Id: Ie3772700270f4f333292b80d59f79555851780f7
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/18547
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ib284493d886b223e8c85607de5fdb56b698fe5fa
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/18546
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If Deep Sx is enabled the event log will get entries added on every
power sequence transition indicating that the suspend well has failed.
When a board is using Deep Sx by design this is intended behavior and
just fills the logs with extraneous events.
To make this work the device init state has to be executed first so it
actually enables the Deep Sx policies in the SOC since this code does
not have any hooks back into the devicetree to read the intended setting
from there.
BUG=b:36042662
BRANCH=none
TEST=Perform suspend/resume on Eve device with Deep S3 enabled, and
then check the event log to be sure that it does not contain the
"SUS Power Fail" event.
Change-Id: I3c8242baa63685232025e1dfef5595ec0ec6d14a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18664
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add a function to read the current state of Deep S5 configuration
and indicate if it is enabled (for AC and/or DC) or disabled.
This is similar to the existing function that checks Deep S3
enable state.
BUG=b:36042662
BRANCH=none
TEST=tested with subsequent commits to check Deep S5 state at boot
and filter event log messages if it is enabled.
Change-Id: I4b60fb99a99952cb3ca6be29f257bb5894ff5a52
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18663
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add options to the skylake chip config that will allow tuning the
various settings that can affect acoustics with the CPU and its VRs.
These settings are applied inside FSP, and they can adjust the slew
slew rate when changing voltages or disable fast C-state ramping on
the various CPU VR rails.
BUG=b:35581264
BRANCH=none
TEST=these are currently unused, but I verified that enabling the
options can affect the acoustics of a system at runtime.
Change-Id: I6a8ec0b8d3bd38b330cb4836bfa5bbbfc87dc3fb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18662
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Fix the errors detected by checkpatch and update the copyright dates.
TEST=Build and run on Galileo Gen2
Change-Id: Idad062eaeca20519394c2cd24d803c546d8e0ae0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18591
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following issues:
* A raw read is described by a single read segment, don't assert.
* Support reads longer than the FIFO size.
* Support writes longer than the FIFO size.
* Use the 400 KHz clock by default.
* Remove the error displays since vboot device polling generates
errors.
TEST=Build and run on Galileo Gen2
Change-Id: I421ebb23989aa283b5182dcae4f8099c9ec16eee
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18029
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use header (soc/intel/common/block/include/intelblocks/msr.h) for
MSR macros
Change-Id: I401b92cda54b6140f2fe23a6447dad89879a5ef0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18554
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7bd83d293fcc1848f6f64526d8f38d010c1f69a3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18223
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move all common MSRs as per IA SDM into a common location
to avoid duplication.
Change-Id: I06d609e722f4285c39ae4fd4ca6e1c562dd6f901
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18509
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Create sample model for common Intel XHCI driver.
Change-Id: I81f57bc713900c96d998bae924fc4d38a9024fe3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18221
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Select all Kconfig belongs into Intel SoC Family block/ips common
code model and include required header.h file.
Change-Id: Idbce59a57533dbeb9ccfadca966c3d7560537fa0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18377
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Don't need "skylake/include/soc/xhci.h", hence removed.
Change-Id: I35df2003f311b557b622ce1d7a1c2e832693c2fc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18508
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Split out dual-port switching functionality into dedicated xdci.c.
Change-Id: Ia58fc3fb6d017dd0c19cc450d1caba307fc89a7b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/18226
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Support for voltage margining is dependent on the platform.
Enabling voltage margining puts additional constraints for
the SLP_S0# to be asserted and hence moving to S0ix state.
If the platform PMIC/VR supports PCH voltage reduction,
voltage marigining can be enabled.
Use the UPD provided by FSP to enable/disable voltage margining.
Change-Id: Iea214e9d7d6126e8367426485c6446ced63caa66
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18469
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix a typo that was introduce in commit 696ebc2d (Broadwell/Sata:
Add support for setting IOBP registers for Ports 2 and 3.) [1].
Setting one of the SATA port 3 IOBP setting was using the value from
the port 2 register.
On the purism/librem13 (on which SATA port 3 is tested), this change
doesn't seem to affect anything, as that typo wasn't exhibiting any
visible problems anyways.
[1] https://review.coreboot.org/18408
Change-Id: I3948def5c0588791009c4b24cbc061552d9d1d48
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/18514
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Save SMBIOS memory information from FSP MEM_INFO_DATA_HOB in CBMEM.
Add function dimm_info_fill() which populates SMBIOS memory
information from FSP MEM_INFO_DATA_HOB data.
BUG=chrome-os-partner:61729
BRANCH=none
TEST=Build and boot KBLRVP to verify the type 17 DIMM info coming in
SMBIOS table from Kernel command "dmidecode".
Change-Id: I0fd7c9887076d3fdd320fcbdcc873cb1965b950c
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/18418
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Camera and Imaging device should be enabled for camera usecase,
FSP provides a UPD to enable/disable the SA IMGU (Imaging Unit)
expose the same as a config option in devicetree.cb
Also remove a redundant assignment for PchCio2Enable.
BUG=None
BRANCH=None
TEST=lspci should list 00:05:00
Change-Id: I4cf7daf41bfaf4dcba414921cac2e7e12bf89f37
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18365
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This enables some required Kconfig options when CONFIG_CHROMEOS is set.
Change-Id: I290902746c1ea19c8bcb69540e34fde09abb9adf
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/18448
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The Broadwell SATA controller supports IOBP registers on ports 0 and 1 but
Browell supports up to 4 ports, so we need to support setting IOBP for
ports 2 and 3 as well.
The magic numbers (IOBP SECRT88 and DTLE) for ports 2 and 3 were only
guessed by looking at ports 0 and 1 and extrapolating from there.
Port 3 has been tested (DTLE setting on Librem 13) and confirmed to work
so we can assume that port 2 and 3 magic numbers are valid, but having
someone confirm them (through non-public documents?) would be great.
Change-Id: I59911cfa677749ceea9a544a99b444722392e72d
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/18408
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This is done to avoid any conflicts with same IRQ enums defined by other
drivers.
BUG=None
BRANCH=None
TEST=Compiles successfully
Change-Id: I539831d853286ca45f6c36c3812a6fa9602df24c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18444
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adding spi_xfer_two_vectors as .xfer_vector for ipq40xx spi_ctrlr.
Commit c2973d196d1 ("UPSTREAM: spi: Get rid of SPI_ATOMIC_SEQUENCING")
has added a new driver method xfer_vector to support combined write-read
operation within a single CS cycle. The method is wrapped in the
spi_xfer_vector() API. When spi_ctrlr structure does not have
xfer_vector method, API calls write and read operations sequentially.
However the QCA40xx SPI driver has "forced" CS activation-inactivation
in xfer method, so individual operation will break CS after write
operation, making combined write-read cycle broken.
Adding xfer_vector method to spi_ctrlr is a simple fix to prevent this.
BUG=None
BRANCH=none
TEST=built and run on Gale
Change-Id: I2258e563d0793bcacd626f78b8e96b3649a8e4a4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 88a8824951cef4fe293dfa6e3a1a837ae07b6156
Original-Change-Id: I031e85ce5b847353cb1084f6f68b2af8c6f702e1
Original-Signed-off-by: Yuji Sasaki <sasakiy@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/433439
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Reviewed-on: https://review.coreboot.org/18297
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
With recent change (a4b11e5c90: soc/intel/skylake: Perform CPU MP Init
before FSP-S Init) to perform CPU MP init before FSP-S init, suspend
resume is currently broken for all skylake/kabylake boards. All the
skylake/kabylake boards store external stage cache in TSEG, which is
relocated post MP-init. Thus, if FSP loading and initialization is
done after MP-init, then ramstage is not able to:
1. Save FSP component in external stage cache during normal boot, and
2. Load FSP component from external stage cache during resume
In order to fix this, ensure that FSP loading happens separately from
FSP initialization. Add fsp_load callback for pre_mp_init which ensures
that the required FSP component is loaded/saved from/to external stage
cache.
BUG=chrome-os-partner:63114
BRANCH=None
TEST=Verified that 100 cycles of suspend/resume worked fine on poppy.
Change-Id: I5b4deaf936a05b9bccf2f30b949674e2ba993488
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18414
Tested-by: build bot (Jenkins)
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently the USB OC pins definition only being defined up to OC3.
For PCH-H, OC4 and OC5 are needed, so add both into OC pin enum.
Changes is being verified and booted to Yocto with Saddle Brook.
Change-Id: Idaed6fa7dcddb9c688966e8bc59f656aec2b26eb
Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Reviewed-on: https://review.coreboot.org/18364
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Setting both bits 27 and 7 of PCH register PMSYNC_CFG (PMSYNC
Configuration; offset 0x33c8) causes pre-OS display init to fail
on HSW-U/Lynxpoint and BDW-U ChromeOS devices when the VBIOS/GOP
driver is run after the register is set. A re-examination of
Intel's reference code reveals that bit 7 should be set for the
LP PCH, and bit 27 for non-LP, but not both simultaneously.
The previous workaround was to disable the entire power optimizer
section via a Kconfig option, which isn't ideal.
Test: unset bit 27 of PMSYNC_CFG and boot google/lulu,
observe functional pre-OS video output
Change-Id: I446e169d23dd446710a1648f0a9b9599568b80aa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18385
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
We've been able to narrow down the problem to a single register/
single bit, so revert this commit and address the problem in a
follow-on commit.
This reverts commit 0f2025da0fd4dce6b951b4c4b97c9370ca7d66db.
Change-Id: I780f9ea2976dd223aaa3e060aef6e1af8012c346
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18384
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There is an enable_s0ix config option in the devicetree that should
be used to disable it when not set:
- do not export C8/C9/C10 C-states in _CST
- do not enable SLP_S0 in FSP
BUG=chrome-os-partner:58666
TEST=test on eve board to ensure that OS only sees 3 ACPI C-states
instead of 6 and that it no longer attempts to enter C10
Change-Id: I90e4dc776d1d17d0b700cda63c8476786cd2e4ff
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18394
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Prmrr configuration is supported by Kabylake FSP-M with UPD provided.
It is required as one of the SGX initialization steps in BIOS.
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Tested on Eve, verified uncore PRMRR MSRs get programmed to set
size and boot.
Change-Id: I2b3dc7c92487505165ee429bd1a37bd60ceac8f3
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18361
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add APIs and required parameters for creating Maxim 98927
and Realtek 5336 SSP endpoints in NHLT table.
BUG=chrome-os-partner:62051
BRANCH=None
TEST=check that NHLT table created is created properly
Change-Id: Ica302aab05c5364faf4923dc5327be8e8eaae8b4
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: M Naveen <naveen.m@intel.com>
Reviewed-on: https://review.coreboot.org/18213
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Currently there is no distinction between mainboards using
Skylake or Kabylake SoC, Add a config option for Kabylake
SoC to allow mainboards to explicitly select if they are
using it.
Change-Id: Ie7960bd81f88a223894afe3115ddc0bc637e4be4
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18312
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There are MSRs that are programmable per-core not per-thread, so add
a function to check whether current executing CPU is a primary core
or a "hyperthreaded"/secondary core. For instance when trying to
program Core PRMRR MSRs(per-core) with mp_init, cpu exception is thrown
from the secondary thread. This function was used to avoid that.
Potentially this function can be put to common code or arch/x86 or cpu/x86.
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Tested on Eve, verified core PRMRR MSRs get programmed only on primary
thread avoiding exeception.
Change-Id: Ic9648351fadf912164a39206788859baf3e5c173
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18366
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new PCI driver for SPI devices with supported PCI ids. Also,
provide a translation table to convert struct device structure into SPI
bus number.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: If860eb819f2ce5ae5443f808b356af57f86c52be
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18341
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Provide implementation of get_config routine for GSPI controller on
skylake platforms.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: I5170076c15d72a7f29acd0989acef5b9149e2ba0
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18338
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
HALO SOC
Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL HALO SOC
Change-Id: I6a44d55d1588d2620bd1179ea7dc327922f49fd7
Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com>
Reviewed-on: https://review.coreboot.org/18028
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
As per BWG, CPU MP Init (loading ucode) should be done prior
to BIOS_RESET_CPL. Hence, pull MP Init to BS_DEV_INIT_CHIPS Entry
(before FSP-S call).
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Boot to OS with all threads enabled.
Change-Id: Ia6f83d466fb27e1290da84abe7832dc814b5273a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18287
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This reverts commit 32997fb0bcb9f4183789331a91fd83138776b96f.
This change is breaking I2S audio on Kabylake platforms so
revert the change to fix audio.
BUG=chrome-os-partner:61548,chrome-os-partner:61009
TEST=manual testing on Eve P1 system
Change-Id: I3212c8be83078ed57e38501386605e67b87d5bd0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18360
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Some variants need the internal pull resistor on GPIO_SSUS_40
set explicitly to pull down rather than disabling the pull,
in order for the ram-id to be read correctly via GPIO.
Correct this by adding a function to enable and set the internal pull
and define its use as needed in the board's variant.h.
Chromium source:
branch: firmware-gnawty-5216.239.B
/src/soc/intel/baytrail/baytrail/gpio.h#418
/src/mainboard/google/gnawty/romstage.c#60
Test: boot 4GB Candy board and observe correct RAM id, amount detected
Change-Id: I8823c27385f4422184b5afa57f6048f7ff2a25ab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18309
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Kernel relies on FADT 8042 flag to enable/disable
8042 interface. If FADT reports 8042 capability and
8042 (/PS2) capability is actually disabled by coreboot,
kernel would assume the presence of 8042 based on the
FADT flag. This results in undesired system power off when
kernel tries to access the 8042 memory region. To address
this, CONFIG_NO_FADT_8042 was added to selectively
disable 8042 on FADT.
BUG=chrome-os-partner:61858
TEST=Boot OS and verify FADT 8042 flag
Change-Id: Ic80b3835cb5cccdde1203e24a58e28746b0196fc
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://review.coreboot.org/18307
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Dump the CSE status registers for potential debugging purposes.
Explicitly call out manufacturing mode of the part since it's
important shipping devices ensure manufacturing mode is locked
down. Intel is planning on writing a common driver so a complete
status -> string dumps was not done because (surprise surprise)
not all the fields are equal with previous implementations.
BUG=chrome-os-partner:62177
BRANCH=reef
TEST=Booted and noted dump of CSE status registers.
Change-Id: I71d15722bb193877f1569c1d3e7f441302f5bd14
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18303
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
It may cause an edp aux transfer error if the edp pclk is
set too high, so reduce it to 25MHz.
BUG=chrome-os-partner:60130
BRANCH=None
TEST=Build and Boot
Change-Id: Id1063baa5a82637b03c0f1f754181df074ab17cc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8f7ce31a7483e765ae0c86f8e62ef51413ee1596
Original-Change-Id: Ibb86c12c1d7c00dc3b4cc7a6bdf3bd6e895cd9f3
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/429410
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18178
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The lpss_i2c driver is enabled in romstage, so the SOC needs to
export the pre-ram compatible I2C controller info, which for
skylake is in the bootblock/i2c.c file.
This was not causing a compiler error in normal use, but when
adding I2C debug code in romstage it failed to compile.
With this added, I can now do I2C transactions in romstage.
Change-Id: I0778b0497d0b6936df47c29b2ce942c8d90cf39b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18198
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The define for GPIO_13_IRQ had the wrong IRQ number. It should
be 0x70 instead of 0x6f.
BUG=chrome-os-partner:62085
BRANCH=reef
TEST=touch controller doesn't indicate continuous interrupts
Change-Id: I3a0726db59fc1eb7736d348aecbf1082719f15b2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18190
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
As per Audio PCH team recommendation the iDisplay Audio/SDIN2
should be disabled to bypass InitializeDisplayAudio() function
call. Display Audio Codec is HDA-Link Codec, which is not
supported in I2S mode
BUG=chrome-os-partner:61548
BRANCH=none
TEST=Tested to verify that InitializeDisplayAudio() does not
get called.
Change-Id: Ie0771a8653821e737d10e876313917b4b7c64499
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/18091
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Currently car_stage_entry is defined only in romstage_after_verstage and
as a result when SEPARATE_VERSTAGE is not selected, there is no
entry point into romstage and romstage will not be started at all.
The solution is move out romstage_after_verstage.S from fsp1.1 driver
to skylake/romstage. And add CONFIG_PLATFORM_USES_FSP1_1 to fix the
build and boot issue with this change.
Besides that, rename the romstage_after_verstage to romstage_c_entry
in more appropriate naming convention after this fix.
Tested on SkyLake Saddle Brook (FSP 1.1) and KabyLake Rvp11 (FSP 2.0),
romstage can be started successfully.
Change-Id: I1cd2cf5655fdff6e23b7b76c3974e7dfd3835efd
Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Reviewed-on: https://review.coreboot.org/17976
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add SATA interrupt for APIC mode
Change-Id: I9e0682e235715399da2c585174925c89b9116ab3
Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com>
Reviewed-on: https://review.coreboot.org/18130
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change all instances of "wacbmem_entryanty" to "warranty".
Change-Id: I113333a85d40a820bd8745efe917181ded2b98bf
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18136
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
