| Age | Commit message (Collapse) | Author |
|---|
|
Found an issue where emmc and sd clocks were being misconfigured due
to using incorrect integer values when called instead of the defined
enums. Fixing by splitting the clock_configure_sdcc() function into
two (sdcc1 and sdcc2) as there was no commonality between the two
cases anyway. As a result, we can also get rid of the clk_sdcc enum.
BUG=b:198627043
BRANCH=None
TEST=build herobrine image and test in conjunction with CB:63289
make sure assert is not thrown.
Change-Id: I68f9167499ede057922135623a4b04202f4da9b5
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:226848617
TEST=With the following change, the nereid C1 PMC mux conn is disabled
based on fw_config, allowing HDMI to work.
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I487f3ca4be4ead0c5dfb46e9eb19de5ae9b9bda9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63237
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a stack in .bss for C execution. This will make it easier to move
the setup of MTRRs in C code.
Change-Id: I67cbc988051036b1a0519cec9ed614acede31fd7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since Sabrina uses the image slot header (ISH) that depends on the AMD
A/B recovery scheme that depends on the multi-level PSP directory
support, the multi-level support gets automatically selected by passing
Sabrina as SoC name to amdfwtool, so passing the --multilevel command
line switch to amdfwtool isn't needed.
TEST=Timeless build results in identical binary for chausie
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I98154d5b47daca6ae7952ffd3175d98ea3e01845
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The fch_i23c_pad_init implementation was written without looking at any
reference code and turned out to not work properly on hardware. Before
this function writes to the MISC_I23C_PAD_CTRL registers, the value read
back is 0x3000003c which results in the I2C bus communication to work
while the 0x300003fc the code writes to the register breaks the I2C
communication. Removing the code that sets bits 6..9 fixes the I2C bus
communication.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ie6758b3d13c59b20ce810225fca8a365713b7a2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63234
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Contradicting the PPR #57243 version 1.56, the I2C3 pad control register
in the MISC ACPIMMIO region is the same new I23C pad type as the
corresponding registers for I2C0..2 and not the older I2C pad control
register type used on Picasso and Cezanne. All I2C pads being of the new
I23C type is in line with the GPIOMUX settings for the pins used by
I2C0..3 that can alternatively connect the pins to an I3C controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51b0ddf8ba2ccfee823e3d4d26a77b11825b1029
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63233
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to PPR #57243 version 1.56, the IOMUX setting 2 of the pins 19
and 20 is the I3C3 controller and not the I2C3 controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9688f1816aa840c64441495ed451997a474b306f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63232
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When masking out bits with an and mask, the bit mask needs to be
inverted.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9739d7150e230fbbe6523413de9c07d7340f3c61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63222
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I23C_PAD_CTRL_SLEW_N_SHIFT is 6 and not 7 which matches both with the
PPR #57243 revision 1.53 and with I23C_PAD_CTRL_SLEW_N_MASK which covers
both bits 6 and 7.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I622717bebaffe34b6df5e578b082dc10e2a98256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63216
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:205928013
TEST=Build, boot brya0 and dump SSDT to check TPWR device HID
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I82507a3c0a521adbb8dec5520fd6d2ea3782c60e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
On x86 ramstage is always relocated at runtime in cbmem so there is no
need to have this configurable in Kconfig.
Change-Id: I01b2335d0b82bea8f885ee5ca9814351bbf2aa3c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63215
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
EE requested that we increase the drive strength for the SPI lines to
8mA.
BUG=b:198627043
BRANCH=None
TEST=EE help verify
Change-Id: Ic887a7eef74f1063f7284db042c5fbd2e1d5bd4c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The do_send_end_of_post function is implemented in the cse_eop.c file.
This change adds the Kconfig SOC_INTEL_CSE_SET_EOP in cse.c to avoid
build issue.
Change-Id: Ib52404d9ad4c01a460e4cfef331c529d2a53337a
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
On platforms using UDK2015 select UDK2017 instead.
This allows to drop UDK2015 headers.
Tested using timeless builds: The produced binaries are identical.
Change-Id: Ia6032c6520ec889cd63655db982d9bfa476dc24d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Replace LShiftU64 and RShiftU64 as the defined macro conflicts with
UDK2017 headers.
Tested using timeless builds: The produced binaries are identical.
Change-Id: I8f205f663be9c9c31cf384ca89370afa48ca1e15
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Fix return type of early_init_get_elapsed_time_us() to comply with the
data type of return value.
Also replace memset() with struct initializer.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Fixes: commit 41faa22 (soc/mediatek: Add early_init for passing data
across stages)
Change-Id: I7c361828362c2dfec91358ad8a420f5360243da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The patch logs CSE RO's write protection information for Alder Lake
platform. As part of write protection information, coreboot logs status
on CSE RO write protection and range. Also, logs error message if EOM
is disabled, and write protection for CSE RO is not enabled.
TEST=Verify the write protection details on Gimble.
Excerpt from Gimble coreboot log:
[DEBUG] ME: WP for RO is enabled : YES
[DEBUG] ME: RO write protection scope - Start=0x1000, End=0x15AFFF
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I766d5358bb7dd495b4a9b22a2f1b41dc90f3d8d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Now that the amdfwtool support for Sabrina is in place, change the
SoC name parameter passed to amdfwtool from Cezanne to Sabrina.
The fw.cfg file still points to the Cezanne binaries, but since
commit 9cb0a05dfb308323a5b3df1a25fa66b35ecfcdd6 (soc/amd/sabrina: Add
prompt for AMDFW_CONFIG_FILE) this can be overridden via the Kconfig
config file in the build. As soon as the Sabrina PSP binaries are
available in 3rparty/amd_blobs, the fw.cfg file will be updated to use
the correct ones for Sabrina.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I53a8de222e39bd2b92c07661b6c52a02fb651609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63189
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PSP_S0I3_RESUME_VERSTAGE Kconfig symbol is only defined in the
Cezanne Kconfig, so drop this from the Sabrina makefile.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9571a302d427981cdf750a1cb3b7f4db9d61a87c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63188
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The way to select the pads has changed from Cezanne.
BUG=b:226635441
TEST=Build skyrim
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I96baf6b9c169ed61d221352b29ac676bca40da21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63095
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is done to work around a hang when SMU writes to port80. Remove it
after the issue is fixed.
BUG=b:224618411
TEST=Build and boot to OS in Skyrim.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ic152c295954d33ef1acddb3b06f0c6bbfbfb38ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63122
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the PCIe CEM specification, the deassertion of PERST#
should occur at least 100ms after the assertion. To ensure the 100ms
delay requirement is met, calculate the elapsed time since assertion. If
it is smaller than 100ms, do an extra delay.
TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the measured PERST# time:
[DEBUG] mtk_pcie_domain_enable: 432517 us elapsed since assert PERST#
[INFO ] mtk_pcie_domain_enable: PCIe link up success (17 tries)
And the SSD information in boot log is as follows:
== NVME IDENTIFY CONTROLLER DATA ==
PCI VID : 0x15b7
PCI SSVID : 0x15b7
SN : 21517J440114
MN : WDC PC SN530 SDBPTPZ-256G-1006
RAB : 0x4
AERL : 0x7
SQES : 0x66
CQES : 0x44
NN : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006
BUG=b:178565024
BRANCH=cherry
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Ie2b7b6174abdf951af5796ab5ed141c45f32fc71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Described in PCIe CEM specification sections 2.2 (PERST# Signal) and
2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should be
delayed 100ms (TPVPERL) for the power and clock to become stable.
Instead of asserting PERST# right before PCIe initialization and waiting
for 100ms, which is currently the only function of 'mtk_pcie_pre_init',
so that the extra 100ms delay in ramstage is avoided.
TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
== NVME IDENTIFY CONTROLLER DATA ==
PCI VID : 0x15b7
PCI SSVID : 0x15b7
SN : 21517J440114
MN : WDC PC SN530 SDBPTPZ-256G-1006
RAB : 0x4
AERL : 0x7
SQES : 0x66
CQES : 0x44
NN : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006
BUG=b:178565024
BRANCH=cherry
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Id5b9369e6f8599f93415588ea585c952a41c5e7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add early init support for MT8195 platform.
TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
== NVME IDENTIFY CONTROLLER DATA ==
PCI VID : 0x15b7
PCI SSVID : 0x15b7
SN : 21517J440114
MN : WDC PC SN530 SDBPTPZ-256G-1006
RAB : 0x4
AERL : 0x7
SQES : 0x66
CQES : 0x44
NN : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006
BUG=b:178565024
BRANCH=cherry
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I4eb7da53ff76c385cab18bbf84970e96b61662ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add support for "early_init_data" region, which can be used to store
data initialized in an early stage (such as bootblock), and retrieve it
in later stages (such as ramstage).
TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
== NVME IDENTIFY CONTROLLER DATA ==
PCI VID : 0x15b7
PCI SSVID : 0x15b7
SN : 21517J440114
MN : WDC PC SN530 SDBPTPZ-256G-1006
RAB : 0x4
AERL : 0x7
SQES : 0x66
CQES : 0x44
NN : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006
BUG=b:178565024
BRANCH=cherry
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I01f91b7fe2cbe4f73b5c616bb7aae778dee27d9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
SMU locks up sometimes if the port80 enable bit is cleared in the ESPI
Decode register. Add a config to choose between clearing the entire ESPI
Decode Register vs retaining the port80 enable bit.
BUG=None
TEST=Build and boot to OS in Skyrim.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ia5ee012ac4858d6dd43827274169edf622a70489
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8186.
Therefore, we select this configuration to enable it.
BUG=none
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ieaaf57aaee79c9dce69cc1acaa092207f0f906de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63114
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The memory initialization reference code didn't support returning
DRAM information in the old platforms, for example MT8192 and MT8195.
So we have to add a new configuration USE_CBMEM_DRAM_INFO to make
sure the common code will try to get DRAM information on new
platforms supporting that.
BUG=none
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Iebe9ea0c1d01890b09fdf586813d85adde9702e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The current pmif register setting for low power mode is incorrect,
which is causing suspend failure. The issue of suspend failure is that
SRCLKENA0 will not be pulled down. EC will not be informed AP is
suspending now becuase of this. Therefore, add pmif_spmi_set_lp_mode()
to correct the setting.
This implementation is based on chapter 3.7 in MT8186 Functional
Specification.
BUG=b:215639203
TEST=test of suspend and resume pass.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Change-Id: I2d02198f19f9cb052fba612c02404a6af1a10adb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The Cherry follower projects may choose Max98390 for audio output
so we have to add a new config CHERRY_USE_MAX98390. Also, the
'dojo' device is the first one to use it.
BUG=b:204391159
BRANCH=cherry
TEST=emerge-cherry coreboot
TEST=Verify beep function through CLI in depthcharge successfully
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Change-Id: I9b6bc5a5520292dd502b0389217f5062479b4490
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63083
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves `pmc_clear_pmcon_sts` function into common code and
remove SoC specific instances.
Accessing PMC GEN_PMCON_A register differs between different Intel
chipsets. Typically, there are two possible ways to perform GEN_PMCON_A
register programming (like `pmc_clear_pmcon_sts()`) as:
1. Using PCI configuration space when GEN_PMCON_A is a PCI configuration
register.
2. Using MMIO access when GEN_PMCON_A is a memory mapped register.
SoC users to select `SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION` Kconfig to
perform GEN_PMCON_A register programming using PMC MMIO.
BUG=b:211954778
TEST=Able to build brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8d15f421c128630f928a1b6a7e2840056d68d7b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeff Daly <jeffd@silicom-usa.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The Sabrina microcode update files are 3200 bytes large and not 5568
like it is the case on Cezanne where this file was originally copied
from.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I12209d523096781195ba8957ec797d8c80eecbe5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This patch uses the FSP event handler feature and updates with coreboot
native debug implementation to unify the debug library between coreboot
and FSP.
BUG=b:225544587
TEST=Able to build and boot Brya with the same FSP debug log before and
with this code changes.
Before:
Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE
Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3
Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A
The 0th FV start address is 0x000F961B000, size is 0x00150000, handle is 0xF961B000
Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38
Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6
With this code change:
[SPEW ] Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE
[SPEW ] Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3
[SPEW ] Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A
[SPEW ] The 0th FV start address is 0x000F95C0000, size is 0x00160000, handle is 0xF95C0000
[SPEW ] Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
[SPEW ] Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38
[SPEW ] Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4a0530a282657e379a00c3e7d0ed8148dd5e9196
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch assigns FSP handler event for FSP-M and FSP-S with coreboot
romstage and ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER
Kconfig is enabled.
BUG=b:225544587
TEST=Able to build and boot brya. Also, verified the FSP debug log is
exactly same before and with this code change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I665def977faaae45f6f834d75e8456859093ba49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Found using:
diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/)
Change-Id: I93f930de5a2a477ec4c0d8e5c8c57b25f5e4252c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com>
|
|
Found using:
diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<"
Change-Id: Ifc85ed8b5660eca11be50fddda0cf32aa1dd611c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Found using:
diff <(git grep -l '#include <bootmode.h>' -- src/) <(git grep -l 'platform_is_resuming\|gfx_set_init_done\|gfx_get_init_done\|display_init_required\|get_ec_is_trusted\|get_lid_switch\|get_wipeout_mode_switch\|clear_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_write_protect_state\|init_bootmode_straps' -- src/) |grep "<"
Change-Id: I2ebd472e0cfc641bd7e465b8d29272fd2f7520a1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
To control I2S in MT8195 for dojo project, we need to enable adsp
power before audio power. Therefore, we need to update bus protection
steps to correct the setting.
TEST=build pass
BUG=b:204391159
BRANCH=cherry
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Change-Id: I0bcf1ddeebf0d3df0a1d6b22273123be1aaf85a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63106
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Agesa headers extensively use and override pragma pack which fails to
compile with clang.
Change-Id: Ib234be536388f41d63c2d26cac4c35881af25930
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This fixes building with clang.
Change-Id: Ifda9be8996703b06fe9ee30ffb5f56a91629e065
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This fixes building with clang.
Change-Id: If2686b0938d34cd66393eb14205c5c8a5b3ba98b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Fixes building with clang.
Change-Id: I7027f3681e18b8ca0d2f0c899412806082846463
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63050
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang complains about implicit enum typing so make it explicit.
Change-Id: I20aba3bd3af8a7292e04d2496c3cba1ab6ba3019
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Iaa643feb76530cc74acf4d714d8a7f96709be1cf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
SMMINFO is already set up in S5, so it should be skipped in S3 resume
TEST=builds
Change-Id: I58e25075a007505e53962525ec4d9acd2ce6c7ae
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
SMMINFO is already set up in S5, so it should be skipped in S3 resume
TEST=builds
Change-Id: Ia58000ce9dac5ecb69ca39354f7775524e439bd0
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
SMMINFO is already set up in S5, so it should be skipped in S3 resume
BUG=b:194990818
TEST=Build guybrush
Change-Id: I30ee6d7006ddac4dbdae9825bd4fa6eac7fd48cb
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For SoC that don't support LPC any more the definition of the PSP soft
fuse chain bit 15 has changed. Earlier SoCs that still supported a
physical LPC bus used this bit to determine if the I/O port 0x80 POST
code are sent to LPC or eSPI. Newer SoCs like Sabrina don't have a
physical LPC bus any more and on those this bit selects if the PSP debug
output is sent to the SoC's MMIO UART or an UART on I/O port 0x3F8 that
the needs to be decoded to eSPI.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0bffb6efacc585a1d02a0455b32f7cf8662b3232
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The patch add APIs to check CSE Region's write protection information.
Also, adds helper functions to get the SPI controller's MMIO address
to access to BIOS_GPR0 register. The BIOS_GPR0 indicates write and read
protection details.
During the coreboot image build, write protection is enabled for CSE RO.
It is enabled through a Intel MFIT XML configuration.
TEST=Verify write protection information of CSE Region
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If1da0fc410a15996f2e139809f7652127ef8761b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This will allow configuring the concerned config through an external
defconfig file.
BUG=None
TEST=Ensure that AMDFW_CONFIG_FILE is configurable.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I97817a822c8c41822e699adc31f0e7452f93fdb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62971
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Pubkey(0), PSP bootloader(1) and IKEK(0x21) should be put to
level 2 only for A/B recovery for Sabrina, which is going to be the
long term and A/B recovery layout only. So the amdfwtool should be
changed for Sabrina.
The old levels of these 3 FWs are for Cezanne, which doesn't use AB
recovery now. Just set the specific field levels in generic Cezanne
folder for demo. Leave the fw.cfg in Guybrush unchanged.
Change-Id: I11092b52927b2c526a5be719104ba39a790b6fa8
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
The current behavior does not actually check if a device is present
before enabling the corresponding gpp_clkx_clock_request_mapping bits
which may cause issues with L1SS. This change sets the corresponding
gpp_clkx_clock_request_mapping to off if the corresponding device is
disabled.
BUG=b:202252869
TEST=Checked that value of GPP_CLK_CNTRL matched the expected value
when devices are enabled/disabled, checked that physically removing a
device that is marked as enabled also disables the corresponding clk req
BRANCH=guybrush
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I77389372c60bdec572622a3b49484d4789fd4e4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61259
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TypeId0x01_PspBootLoader_AB_Stage1_CZN.sbin is bootloader for A/B
recovery. Both bootloader can be put in the fw.cfg. The amdfwtool
decides which booloader is dropped in the directory.
Change-Id: I099b4c98d64dba935bf3ea2b7f191da83b9bd95e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
|
On boards where PSP uses ESPI to write postcodes, update the verstage to
do it after ESPI initialization.
BUG=b:224543620
TEST=Build and boot to OS in Nipperkin. Ensure that there are no
attempts to write the post code from PSP verstage before ESPI
initialization.
Change-Id: I1b78931c741c75dc845c9b34e3b2b896221f2364
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mohan Viswanathan
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This patch adds TCSS XHCI device ID for ADL-N CPU which is required
for USB3 port enumeration.
Document Reference: 645548 revision 1.0 (Chapter 2.3)
BUG=None
BRANCH=None
TEST=Check if device is detected correctly and ACPI entries are
generated for device 0d.0
Change-Id: Id5d42d60eb05137406ef45b9e87e27948fc3b674
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Originally, dram size is hard-coded to 4GB by default. To support
different dram size, calculate it from the mem chip info stored
in CBMEM.
BUG=b:206014043
TEST=Output "dram size: 0x100000000" on Kingler
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I017e9d1a2d6e26f1fc21b67b5962dfb5c6ade8a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Store dram info in cbmem for ramstage or payloads to use.
BUG=b:206014043
TEST=Build pass on Kingler
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I195187c0c757a43bb6d2c57c8f303249f2a7995a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Despite the SMBus device being function 0 of the FCH PCI device, the
MMIO resource of the FCH IOAPIC is on the LPC device which is function 3
of the same PCI device, so move the FCH IOAPIC initialization code to
the LPC device. Since the HPET was enabled in the same function, also
move it to the LPC device initialization.
TEST=On Mandolin both IOAPICs are still correctly detected by Linux.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I585afd463c1c00cd87ced0617e7802503c5deba5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58334
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change provides config for devicetree to control ASPM per port
BUG=b:220079865
TEST=Build FW and run stress exceed 2500 cycles on taeko.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I19b5f3dc8d95e153301d777492c921ce582ba988
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62919
Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin L Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Meteor Lake has the IOE Die for TCSS. This change adds the IOE P2SB
sideband access and exposes API for TCSS usage.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Change-Id: I01f551b6e1f50ebdc1cef2ceee815a492030db19
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch creates a new helper function to enable P2SB BAR.
`p2sb_dev_enable_bar()` takes the PCI P2SB device address (B/D/F)
and BAR address (combining high and low base addresses).
BUG=b:224325352
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ica41e8e8bdfcfe855e730b3878b874070062ef93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
In MT8186, we need to disable spm_thermal to prevent it from
influencing other wdt status.
There are two hardware pathes which are used for asserting watchdog
from thermal. We can disable status of path 1 because status of
path 2 is used.
1. Thermal -> SPM -> WDT
2. Thermal -> WDT
Spm_thermal (path 1) is a flexible option for software control, and
the hardware designer suggests that we should disable it if we don't
use it.
BUG=none
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I0ffde6bad3000a64e3b5782edaa72c62da034302
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62890
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because we close external signal in kernel driver since MT8195, it's
more reasonable to trigger sw reset with exteranl signal again
whenever the wdt status is not equal to 0.
BUG=none
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic6128df7eadaebcf7ff8d4c5492e3e0cfbab6e36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62797
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Without setting the set_resources field for soc_ops, we will get an
error during device initialization:
[ERROR] CPU_CLUSTER: 0 missing set_resources
Because the set_resources field is considered mandatory, explicitly set
it as no-op noop_set_resources.
BUG=b:224419346
TEST=emerge-corsola coreboot
TEST=Did not see the error on krabby
BRANCH=none
Change-Id: Ic82b86f0482a9de09e942c1674be5f0ac615851f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This message is not really an error message, so BIOS_ERR is
inappropriate. The message does seem more like a warning though,
that the developer could have multiple Kconfigs selected to send EOP,
therefore switch to BIOS_WARN instead.
BRANCH=firmware-brya-14505.B
TEST=build
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I57a34334007a6a7443302c2f25de3d5c87c85573
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
TCSS ASL code was carried forward from TGL and it used to follow the same
sequence.
Recently as part of s0ix hang issue, it was found that sending IOM
MCTP command as part of TCSS D3 Cold enter-exit sequence created an
issue.
We discovered that due to change in hardware sequence, ADL should not
set/reset IOM MCTP during D3 cold entry or exit. This patch removes the
bit setting from ASL file to prevent hang in the system.
This patch also removes obsolete Pcode mailbox communication which is
no longer required for ADL.
BUG=b:220796339
BRANCH=firmware-brya-14505.B
TEST=Check if hang issue is resolved with the CL and no other regression
observed
Change-Id: I2f066bcc4a8f475a15ddd12ef5ed87d7298312bb
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62861
Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some counters are not being initialized and are relying on mainboards to
set their values. If the mainboards have not implemented these
functions it leads to indeterminate behavior.
BUG=b:224987813
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I254e26080319478b1b5b1f5c353a7966cfac63b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Some counters are not being initialized and are relying on mainboards to
set their values. If the mainboards have not implemented these
functions it leads to indeterminate behavior.
BUG=b:224987813
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I14903980fd921cad24c39cadd533349c14cc1cd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Some counters are not being initialized and are relying on mainboards to
set their values. If the mainboards have not implemented these
functions it leads to indeterminate behavior.
BUG=b:224987813
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I8d4f5b1124d4017b04bcaf7044216fd696dce63d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This message is not really an error message, so BIOS_ERR is inappropriate. Since the message is informational, switch to
BIOS_INFO instead.
BUG=b:222038287
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I9dc852a0cd30f95506c205f161a05e8a8c44fcd5
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch refactors the current P2SB common code driver to accommodate
the future SoC platform with provision of more than one P2SB IP in
disaggregated die architecture.
IA SoC has only one P2SB in PCH die between SKL to ADL. Starting with
MTL, one more P2SB IP resides in IOE die along with SoC die. (PCH die is
renamed as SoC in MTL.)
P2SB library (p2sblib.c) is common between PCH/SoC and IOE, and p2sb.c
is added only for PCH/SoC P2SB.
BUG=b:224325352
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib671d9acbfdc61305ebb401499bfc4742b738ffb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change supports the configuration and enablement of
mdp clock to vote for turbo and supports different display
panel resolutions and framerates.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Change-Id: Ibf4f11d02b0edf83461dbb7af99fda5f33cd5b71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62371
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for EDP (Embedded DisplayPort) clocks in coreboot.
This change supports the configuration and enablement of
EDP PIXEL, LINK, LINK_INTF and AUX clocks.
BUG=b:182963902,b:216687885
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Change-Id: Ia6872ede515401e95ea2dadc9766e3e70fb66144
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59611
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ADL-P MCH ID 4, 8, 9, 10 into this list.
BUG=b:222038287
BRANCH=firmware-brya-14505.B
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: I2cee31ba56e0b142c50a745c453968635e86296e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Cache the BIOS region and extended BIOS region if the boot device is
memory mapped, which is mostly the case with Intel SoC platform.
Having the ROM region cached helped to improve the pre-boot time.
TEST=Able to boot redrix to Chrome OS without seeing any sluggishness.
Additionally verified on EHL board (from siemens), shows significant
savings in payload loading time as below:
Here is the timestamp snippet showing the payload load time as a
comparison between current upstream and the patched version:
upstream:
90:starting to load payload 1,072,459 (1,802)
958:calling FspNotify(ReadyToBoot) 12,818,079 (11,745,619)
with this patch:
90:starting to load payload 1,072,663 (2,627)
958:calling FspNotify(ReadyToBoot) 5,299,535 (4,226,871)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I02b80eefbb3b19331698a205251a0c4d17be534c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch provides a way to cache `ext_bios` region for all stages to
save boot time.
TEST=Able to see the ext_bios region in MTRR snapshot when cached on
the Brya variants.
Here is the timestamp snippet showing the payload load time as a
comparison between current upstream and the patched version:
upstream:
90:starting to load payload 1,072,459 (1,802)
958:calling FspNotify(ReadyToBoot) 12,818,079 (11,745,619)
with this patch:
90:starting to load payload 1,072,663 (2,627)
958:calling FspNotify(ReadyToBoot) 5,299,535 (4,226,871)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I87139a9ed7eb9ed43164a5199aa436dd1219145c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
BUG=b:182963902,b:177917361
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I0f1dd05ee224bf8284661c0afaa01d0a9d71daa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
As per ME BWG, the patch retries MEI CSE DISABLE command if CSE doesn't
respond or sends the garbled response. It retries the command
additionally 2 more times.
TEST=build and boot the Brya board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Id38a172d670a0cd44643744f27b85ca7e368ccdb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
As per ME BWG, the patch retries END_OF_POST command if CSE doesn't
respond or sends the garbled response. It retries the command
additionally 2 more times.
BUG=b:200251277
TEST=Verify EOP retry mechanism for brya board.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ieaec4d5564e3d962c1cc866351e9e7eaa8e58683
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Remove global variable and use 'pcidev_path_on_root()' to get the base
address of PCIe controller.
TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
== NVME IDENTIFY CONTROLLER DATA ==
PCI VID : 0x15b7
PCI SSVID : 0x15b7
SN : 21517J440114
MN : WDC PC SN530 SDBPTPZ-256G-1006
RAB : 0x4
AERL : 0x7
SQES : 0x66
CQES : 0x44
NN : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006
BUG=b:178565024
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Ia41c82a7aa5d6e9d936e242550851cef83afeae9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add chip config for setting PCIe config.
TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
== NVME IDENTIFY CONTROLLER DATA ==
PCI VID : 0x15b7
PCI SSVID : 0x15b7
SN : 21517J440114
MN : WDC PC SN530 SDBPTPZ-256G-1006
RAB : 0x4
AERL : 0x7
SQES : 0x66
CQES : 0x44
NN : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006
BUG=b:178565024
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Icff83f2a9f76862065987a74cfcc7e511be80a20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The current SMM framework only allows the mainboard code to handle GPEs.
i.e., Events 0 - 23. This change allows the mainboard code to handle any
SMI events not handled by the SoC code. This will allow the mainboard
code to handle `SMITYPE_ESPI_SMI`.
BUG=b:222694093
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I81943e8cb31e998f29cc60b565d3ca0a8dfe9cb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US,
which controls how long to wait for an I2C devices to
produce/accept all the data bytes in a single transfer.
(The device can delay transfer by stretching the clock of
the ack bit.)
The default value of this new setting is 500ms. Existing
code had timeouts anywhere from tens of milliseconds to a
full second beween various drivers. Drivers can still have
their own shorter timeouts for setup/communication with the
I2C host controller (as opposed to transactions with I2C
devices on the bus.)
In general, the timeout is not meant to be reached except in
situations where there is already serious problem with the
boot, and serves to make sure that some useful diagnostic
output is produced on the console.
Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
All TGL mainboards are setting DIMM_SPD_SIZE to 512. Thus, default to
512 in the SoC Kconfig and drop it from the mainboard Kconfigs.
Change-Id: I9fd947b61c984e10bd5fba20b73280b08623a008
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62766
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCI ID's for APL/GLK so they can use HDA.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I37df388a93ffc06e716085a58d0d00ed5c6fa9e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The pmic hwcid dumping should not be a warning, so we modify it to info.
BUG=none
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I4a930b69bd45d5f0d84c3d269ca721b287dbadea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
It's more reasonable to halt when we trigger watchdog reset because
the whole system should be reset afterwards.
BUG=b:222217317
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I726ba1599841f63b37062f9ce2e04840e4f250bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
FSP has a parameter to enable/disable c1-state autodemotion feature.
Boards/Baseboard can choose to use this feature as per requirement.
This patch hooks up this parameter to devicetree
BUG=b:221876248
BRANCH=firmware-brya-14505.B
TEST=Check code compiles and correct value has been passed to FSP.
Change-Id: I2d7839d8fecd7b5403f52f3926d1d0bc06728ed9
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
coreboot chip.h files mainly contains variable which allows board to
fill platform configuration through devicetree.
Since many of this configuration involves FSP UPDs, variable names were
in camel case which aligned with UPD naming convention.
By default coreboot follow snake case variable naming, so cleaning up
file to align all variable names as per coreboot convention.
During renaming process, this patch also removes unused variables
listed below:
-> SataEnable // Checked in SoC code based on PCI dev enabled status
-> ITbtConnectTopologyTimeoutInMs // SoC always passes 0, so not used
Note: Since separating out changes into smaller CL might break the
compilation for the patch set, this is being pushed as a single big CL.
BUG=None
BRANCH=firmware-brya-14505.B
TEST=All boards using ADL SoC compiles with the CL.
Change-Id: Ieda567a89ec9287e3d988d489f3b3769dffcf9e0
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Commit hash b8b40964 ( mb, soc: Add the SPD_CACHE_ENABLE) introduced
per mainboard logic to invalidate the mrc_cache.
This patch moves mrc_cache invalidating logic into IA common code and
cleans up the code to remove unused argument `dimms_changed` from SoC
and mainboard directory.
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=Able to build and boot redrix without any visible failure/errors.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6f18e18adc6572571871dd6da1698186e4e3d671
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
This patch adds `FSPM_UPD *` as argument for
mem_populate_channel_data() and read_spd_dimm().
This change will help to update the architectural FSP-M UPDs in
read_spd_dimm().
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=Able to build and boot redrix without any visible failure/errors.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I770cfd05194c33e11f98f95c5b93157b0ead70c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
This patch modifies `memcfg_init` and `variant_memory_init`functions
argument from FSP_M_CONFIG to FSPM_UPD.
This change in `memcfg_init()` argument will help to update the
architectural FSP-M UPDs from common code blocks rather than going
into SoC and/or mainboard implementation.
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=Able to build and boot redrix without any visible failure/errors.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3002dd5c2f3703de41f38512976296f63e54d0c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
The patch uses generic enum type values for EOP command handler. So,
it renames cse_eop_result enum type to cse_cmd_result and also renames
the enum values to have generic name.
TEST=Build the code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ie0efa8fff08318ed863010db289959d113f4767e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch implements error handling as per the ME BWG guide. The BWG
recommends HECI interface reset if there is a timeout or malformed
response is received from the CSE. Also, the patch triggers HECI
interface reset if the CSE link state is not ready in the heci_send()
API.
TEST=Verify HECI Interface reset in the simulated error scenarios.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I3e4a97800cbc5d95b8fd259e6e34a32fc82d8563
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch implements below changes:
1. Implements different error codes and use them in appropriate
failure scenarios of below functions:
a. heci_send()
b. recv_one_message()
c. heci_receive()
2. As heci_send_receive() is updated to return appropriate error codes
in different error scenarios of sending and receiving the HECI
commands. As the function is updated to return 0 when success, and
non-zero values in the failure scenarios, so all caller function have
been updated.
BUG=b:220652101
TEST=Verified CSE RX and TX APIs return error codes appropriately in
the simulated error scenarios.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ibedee748ed6d81436c6b125f2eb2722be3f5f8f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This updates energy performance preference value to all logical CPUs
when the corresponding chip config is true.
BUG=b:219785001
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: Ie59623fe715b0c545f8d4b6c22ab2ce670a29798
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Get boot performance timestamps from CSE and inject them into CBMEM
timestamp table after normalizing to the zero-point value. Although
consumer CSE sku also supports this feature, it was validated on
CSE Lite sku only.
BUG=b:182575295
TEST=Able to see TS elapse prior to IA reset on Brya/Redrix
990:CSME ROM started execution 0
944:CSE sent 'Boot Stall Done' to PMC 88,000
945:CSE started to handle ICC configuration 88,000 (0)
946:CSE sent 'Host BIOS Prep Done' to PMC 90,000 (2,000)
947:CSE received 'CPU Reset Done Ack sent' from PMC 282,000 (192,000)
0:1st timestamp 330,857 (48,857)
11:start of bootblock 341,811 (10,953)
12:end of bootblock 349,299 (7,487)
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Idcdbb69538ca2977cd97ce1ef9b211ff6510a3f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Now that SMM can write to CBMEM we can simply replay the transfer buffer
cbmem console to move it into the main cbmem console.
replay_transfer_buffer_cbmemc() relies on the EARLY_RAM linker symbols.
Since the SMM rmodule get linked with a different linker script than
bootblock/romstage it doesn't have access to these symbols. In order to
pass these symbols into SMM, we parse the bootblock.map file and
generate an early_ram.ld script. This script is then used when linking
SMM.
I replay the buffer in `smm_soc_early_init` because this call happens
before `console_init()`. `console_init()` prints the SMM header and we
want to append the verstage contents before printing the header to avoid
confusion.
BUG=b:221231786
TEST=Perform S0i3 cycles and verify PSP verstage logs now show up when
doing `cbmem -c`.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I64d33ccdee9863270cfbcaef5d7c614349bd895c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Enable PCIe support for mt8195.
TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
== NVME IDENTIFY CONTROLLER DATA ==
PCI VID : 0x15b7
PCI SSVID : 0x15b7
SN : 21517J440114
MN : WDC PC SN530 SDBPTPZ-256G-1006
RAB : 0x4
AERL : 0x7
SQES : 0x66
CQES : 0x44
NN : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006
BUG=b:178565024
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I314572955f1021abe9f2f0f4635670135ed08fff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add a new function 'mtk_pcie_pre_init' to assert the PCIe reset at early
stage to reduce the impact of 100ms delay.
TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
== NVME IDENTIFY CONTROLLER DATA ==
PCI VID : 0x15b7
PCI SSVID : 0x15b7
SN : 21517J440114
MN : WDC PC SN530 SDBPTPZ-256G-1006
RAB : 0x4
AERL : 0x7
SQES : 0x66
CQES : 0x44
NN : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006
BUG=b:178565024
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: If6799c53b03a33be91157ea088d829beb4272976
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
