| Age | Commit message (Collapse) | Author |
|---|
|
The TCO timer is the default watchdog of an x86 host and can reset the
system once it has expired for the second time. There are applications
where this reset is not acceptable while the TCO is used. In these
applications the TCO expire event generates an interrupt and software
takes care. There is a bit in the TCO1_CNT register on Elkhart Lake to
prevent this reset on expiration (called NO_REBOOT, see doc #636722 ).
This bit can either be strapped on hardware or set in this register to
avoid the reset on expiration. While the hardware strap cannot be
overridden in software, the pure software solution is more flexible.
Unfortunately, the location for this bit differs among the different
platforms. This is why it has to be handled on soc level rather than on
TCO common code level.
This commit adds a Kconfig option where NO_REBOOT can be enabled. This
makes it easy to reach this feature over to the mainboard where it can
be selected if needed.
Change-Id: Iaa81bfbe688edd717aa02db86f0a93fecdfcd16b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since Tiger Lake platform, the HECI1 device can be disabled on
Alder Lake platform using two different mechanism:
A. Using PMC IPC command 0xA9.
B. Sending SBI message under SMM.
In current scope of Alder Lake the default implementation is using
(B) sending sbi message under SMM. A follow up patch to add the
possible options and let platform to choose the applicable one.
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
3. Default enable HECI1 device in `chipset.cb` to ensure the HECI1
device can undergo the PCI enumeration and later based on the
mainboard policy the HECI1 device can be disabled.
Mainboards that choose to make HECI1 enable during boot don't override
`DISABLE_HECI1_AT_PRE_BOOT` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie673e634fbc0bdece419c379d417b08dfb4819e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add Alder Lake-N System Agent, PCIE, UFS, IPU and CNVI device IDs.
Document: Alder Lake N Platform EDS Volume 1 (Doc# 645548)
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I0a383816f818b794cf1211766c27937b3b8daa31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Enable PSE GBE with following changes:
1. Configure PCH GBE related FSP UPD flags
2. Add PSE GBE ACPI devices
3. Refactor PCH GBE FSP-S code and merge it together
with PSE GBE code
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: If3807ff5a4578be7b2c67064525fa5099950986a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The Intel® Programmable Services Engine (Intel® PSE) is a
dedicated offload engine for IoT functions powered by an ARM
Cortex-M7 microcontroller. It provides independent, low-DMIPS
computing and low-speed I/Os for IoT applications, plus
dedicated services for real-time computing and time-sensitive
synchronization.
The PSE hosts new functions, including remote out-of-band
device management, network proxy, embedded controller lite
and sensor hub.
This CL enables the user to provide the base address of the
PSE FW blob which will then be loaded by the FSP-S onto the
ARM controller. PSE FW will do the initialization work of
PSE controller and its peripherals. The loading of PSE FW
should have negligible impact on boot time unless PSE
controller could not locate the PSE FW and FSP will attempt to
redo PSE FW loading and wait for PSE handshake until it times
out. Once PSE controller locate the PSE FW, it will do
initialization concurrently by itself with coreboot booting.
It also adds PSE related FSP-S UPD settings which enable the
setup of peripheral ownership (assigned to the PSE or x86
subsystem) and interrupts. These assignments need to take
place at a given point in the boot process and cannot be
changed later.
To verify if PSE FW is loaded properly, the user could enable
PchPseShellEnabled flag and the log will be printed at PSE UART
2.
For further info please refer to doc #611825 (for HW overview)
and #614110 (for PSE EDS).
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Ifea08fb82fea18ef66bab04b3ce378e79a0afbf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Fast-k flow may need to re-init header because mrc_cache doesn't
store header. Storing header together with dparam data is better
for data consistancy.
TEST=fast calibration pass on Corsola
BUG=b:204226005
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I22982923dce06c9e770aa4f20f3dcd2f33685d84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Compared to Cezanne there are 3 more UARTs controllers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id98767197a21cb1a61f54fc9b256b10a9506c791
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Compared to Cezanne there are 3 more UARTs with DMA controllers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a3d255bb4976a55623f3a161e791e80f1d01c69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Let's increase this to avoid losing any logs.
BUG=b:213828947
TEST=Boot guybrush and no longer see
*** Pre-CBMEM romstage console overflowed, log truncated!
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3258145e352af3a75893c7cc96f36eb238c99abb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Replace the Renoir/Cezanne PCI IDs with the Sabrina ones that were added
in commit 27b02c2eee68f4b6c8520c4737224aaaf81f137d (include/device/
pci_ids.h: add PCI IDs for AMD Family 17h Model A0h SoC).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I427df6f8e8c08fb47ae8513b6cf1085d4294e28f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Document #55758 Rev. 1.13 says that family 17h models 30h-3Fh and later
use the spi_readmode_f17_mod_30_3f struct element for SPI_MODE_FIELD and
spi_fastspeed_f17_mod_30_3f for SPI_SPEED_FIELD, so also use this for
The AMD Sabrina SoC which is family 17h models A0h-AFh.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I336f9ea4a0defdf34e1af4b6d568cfe46488f75e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The Cezanne SoC code was initially started as a copy of example/min86
which only provides enough code to make the SoC code build. Then the
different parts of the real SoC support was brought in patch by patch
which also helped cleaning up and untangling the code. Since the Cezanne
SoC code is now in a rather good shape and the Sabrina SoC is similar to
the Cezanne SoC from the coreboot side, the new SoC support is started
with a copy of the Cezanne code and all the needed changes will be
applied on top of that. In order for the build not to fail due to
duplicate files, this patch does not only copy the directory, but also
replaces most instances of the Cezanne name with Sabrina. Since the
needed blobs aren't available in the 3rdparty/amd_blobs repository yet,
the Cezanne blobs are used for now so that the build will succeed. As
soon as the proper blobs will be available in that repository, the code
will be switched over to use them.
As suggested by Nico, I added a "TODO: Check if this is still correct"
comment to the beginning of every copied file and all SOC_AMD_COMMON_*
Kconfig option selects which will be removed after re-verifying that
each file and each selected common code block is still correct for the
new SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I978ddbdbfd70863acac17d98732936ec2be8fe3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
When calling get_pcie_rp_pmc_idx(), the following code checked the
return value to see if it was negative or `> CONFIG_MAX_ROOT_PORTS`.
However, the expected return value for CPU PCIe RPs is above
MAX_ROOT_PORTS. Since the static, local function is intended to return
-1 or a valid value, drop the check for `> CONFIG_MAX_ROOT_PORTS`.
Change-Id: I2039273ad246884cd8736a7f0355e621a706a526
Fixes: b6a15a7 ("soc/intel/common/block/pcie/rtd3: Update ACPI Update
ACPI methods for CPU PCIe RPs")
Tested-by: Tim Crawford <tcrawford@system76.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Change-Id: I909f74853a37a783582471e05071bc3d07e3dcf8
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
To be shared with different SOCs, move the dramc_param_header struct
as well DRAMC_PARAM_FLAG and DRAMC_PARAM_CONFIG enums to a common
header file dramc_param_common.h.
TEST=fast calibration pass
BUG=b:204226005
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I087971799803e47e34c30063b2b0bd0cfc5795ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61132
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change splits the size of the console transfer region and size of
the bootblock/romstage Pre-RAM console region. This allows having a
larger Pre-RAM console while not impacting the size of the PSP verstage
console.
Instead of directly using the PRE_X86_CBMEM_CONSOLE_SIZE symbol in
`setup_cbmem_console`, I chose to use the offsets provided in the
transfer buffer. It would be nice to eventually do this for all the
fields in the transfer buffer.
BUG=b:213828947
TEST=Boot guybrush and verify verstage logs are no longer truncated
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8b8cc46600192a7db00f5c1f24c3c8304c4db31d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
The patch implements get_soc_cpu_type() helper function which
determines whether the executing CPU is a small or a big core. This is
the SoC-specific callback that must be implemented for SoCs that select
SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID. It will be called from
set_cpu_type().
TEST=verified on Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Icd0d7e8a42c4b20d3e1d34998bca6321509df2d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This command retrieves a set of boot performance timestamps
CSME collected during the platform's last boot flow.
BUG=b:182575295
TEST=Verify CSME timestamps after S3 and boot.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ic6f7962c49b38d458680d51ee1cd709805f73b66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch provides the possible options for PCH to allow `Pad
Configuration Lock`.
`SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_SBI` config is for Tiger Lake
Point (TGP) and Alder Lake Point (ADP) PCH.
BUG=b:211573253, b:211950520
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7cf35893ab613b154a1073060081a09e561ffe56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch introduces a `const bit_mask` variable to hold the gpio
PAD mask value prior to sending the lock configuration command using
the sideband interface.
Additionally, this patch fixes the PAD lock overridden issue as below:
Without this code change every consecutive PAD lock operation resets
other bits in that register as below:
After Locking pad 2 , pcr_read=0x4
After Locking pad 3 , pcr_read=0x8
After Locking pad 4 , pcr_read=0x10
After Locking pad 5 , pcr_read=0x20
After Locking pad 6 , pcr_read=0x40
After Locking pad 7 , pcr_read=0x80
After Locking pad 8 , pcr_read=0x100
With this code change all previous lock bits are getting preserved as
below:
After Locking pad 2 , pcr_read=0x4
After Locking pad 3 , pcr_read=0xc
After Locking pad 4 , pcr_read=0x1c
After Locking pad 5 , pcr_read=0x3c
After Locking pad 6 , pcr_read=0x7c
After Locking pad 7 , pcr_read=0xfc
After Locking pad 8 , pcr_read=0x1fc
BUG=b:211573253, b:211950520
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I342a666aa2d34bcc8ba33460396d1248f0c0f89f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60999
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ADL-P 2+8+2 (28W) would have a match PD to ADL-P 4+8+2 (28W). Group them
into the same group core "ADL_P_282_482_28W_CORE".
BUG=b:211365920
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: I3f92c0f5d717dd33ac478fbaa883f3e972e7a7de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The only option to make HECI1 function disable on Elkhart Lake SoC
platform is using SBI under SMM mode.
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I76c625e6221fdef1343599e7dbc7739caa91bf98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
|
|
The only option to make HECI1 function disable on Ice Lake SoC
platform is using SBI under SMM mode. Hence, this patch makes
DISABLE_HECI1_AT_PRE_BOOT=y default and selects
`HECI_DISABLE_USING_SMM` config for Ice Lake.
Also, drop `HeciEnabled` from chip configuration and guard
heci_disable() using DISABLE_HECI1_AT_PRE_BOOT config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If4155e5c7eeb019f7dce59acd5b82720baddcb43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I837e1f8727adefb9227ac7df2ff715245957be2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61258
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This implementation is the same for all SoC that select
SOC_AMD_COMMON_BLOCK_NONCAR, so factor it out to the common AMD non-CAR
CPU support code folder.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I53528f0bb75e9d945740ad5065c75e7de7b5878f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61257
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I393feab8550a7124ab2982ff3d256e3491d27b4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This will verify that signed verstage binaries and the bootblock code
executing agree on the transfer buffer struct size.
BUG=b:213828947
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I597e38fe0a37416ffd3bc01fd974fa8f6610a88c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
set_cpu_type(): It determines the CPU type (big or small) that
is executing the function, and marks the global_cpu_type's array slot
which is corresponds to the executing CPU's index if the CPU type is
big core.
get_cpu_index(): It determines the index from LAPIC Ids. This is
required to expose CPPC3 package in ascending order of CPUs' LAPIC ids.
So, the function returns CPU's position from the ascending order list
of LAPIC ids.
TEST=Tested CPU index calculation, core type determination on Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If4ceb24d9bb1e808750bf618c29b2b9ea6d4191b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch implements a SoC overrides to check CPU privilege level
as the MSR is not consistent across platforms.
For example: On APL/GLK/DNV, it's MSR 0x120 and CNL onwards it's MSR
0x151.
BUG=b:211573253, b:211950520
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I515f0a3548bc5d6250e30f963d46f28f3c1b90b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch creates a `relative increment by 1` macro to let SoC
gpio pad configuration to be more flexible while adding support
for newer PCH SoC.
With this changes adding GPIO controller support for PCH-N would
become really simple without too much of code duplication.
For example: ADL-N has added `GPP_I` pins into community 1 hence,
the additional code for `PCH-N` whould appear incremetal to ADL-P.
> #define GPP_B 0x0
> #define GPP_T INC(GPP_B)
> #define GPP_A INC(GPP_T)
> #define GPP_R INC(GPP_A)
> #define GPD INC(GPP_R)
> #define GPP_S INC(GPD)
> if CONFIG(SOC_INTEL_ALDERLAKE_PCH_N)
> #define GPP_I INC(GPP_S)
> #define GPP_H INC(GPP_I)
> #else
> #define GPP_H INC(GPP_S)
> #endif
> #define GPP_D INC(GPP_H)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie3b2183381b877da0a6e5a27f5176f0e21e0c9fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
This will help debugging verstage failures.
BUG=b:213828947
TEST=Boot guybrush and verify verstage logs are printed before bootblock
messages.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia60991b3e81c19c24ceb69193840dde873ef3346
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add eMMC device into chipset.cb and keep it `off` by default.
eMMC device is applicable only for Alder Lake N SOC.
Change-Id: I2bc38ee5814688409feb7e4531c1daa5b54953c0
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Add eMMC device ID for Alder Lake N SOC.
Reference: Alder Lake N Platform EDS Volume 1 (Doc# 645548)
Change-Id: Id35ec2d508bec8ff7d6f1c5fbfaf209d42b25c72
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Host device id 0x4619 is missed in few coreboot tables so that
coreboot can't recognize and config it properly.
Document Number: 690222
BUG:b:214665785, b:214680767
Change-Id: I95908bdc0a736bafedb328dda2a00b5473de3d88
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Align Denverton PCI ID define names with other Intel SoCs. Also,
update the names in SoC code accordingly.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Change-Id: Id4b4d971ef8f4b3ec5920209d345edbbcfae4dec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch makes DISABLE_HECI1_AT_PRE_BOOT=y default for Cannon Lake
and ensures disable_heci1() is guarded against this config.
Also, makes dt CSE PCI device `on` by default.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idd57d2713fe83de5fb93e399734414ca99977d0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Found using:
diff <(git grep -l '<cbfs.h>' -- src/) <(git grep -l 'cbfs_allocator_t\|cbfs_load\|cbfs_ro_load\|cbfs_type_load\|cbfs_ro_type_load\|cbfs_unverified_area_load\|cbfs_map\|cbfs_ro_map\|cbfs_type_map\|cbfs_ro_type_map\|cbfs_unverified_area_map\|cbfs_alloc\|cbfs_ro_alloc\|cbfs_type_alloc\|cbfs_ro_type_alloc\|cbfs_unverified_area_alloc\|cbfs_cbmem_alloc\|cbfs_ro_cbmem_alloc\|cbfs_type_cbmem_alloc\|cbfs_ro_type_cbmem_alloc\|cbfs_unverified_area_cbmem_alloc\|cbfs_preload\|cbfs_unmap\|cbfs_prog_stage_load\|cbfs_get_size\|cbfs_ro_get_size\|cbfs_get_type\|cbfs_ro_get_type\|cbfs_type\|cbfs_file_exists\|cbfs_ro_file_exists\|mem_pool\|cbfs_cache\|cbfs_boot_device\|cbfs_boot_device_find_mcache\|cbfs_boot_device\|cbfs_get_boot_device\|cbfs_init_boot_device\|cbfs_boot_lookup\|cbfs_alloc\|cbfs_unverified_area_alloc\|cbfs_default_allocator_arg\|cbfs_default_allocator\|cbfs_cbmem_allocator\|cbfs_alloc\|cbfs_ro_alloc\|cbfs_type_alloc\|cbfs_ro_type_alloc\|cbfs_unverified_area_alloc\|cbfs_map\|cbfs_ro_map\|cbfs_type_map\|cbfs_ro_type_map\|cbfs_unverified_area_map\|cbfs_load\|cbfs_type_load\|cbfs_ro_load\|cbfs_ro_type_load\|cbfs_unverified_area_load\|cbfs_cbmem_alloc\|cbfs_ro_cbmem_alloc\|cbfs_type_cbmem_alloc\|cbfs_ro_type_cbmem_alloc\|cbfs_unverified_area_cbmem_alloc\|cbfs_get_size\|cbfs_ro_get_size\|cbfs_get_type\|cbfs_ro_get_type\|cbfs_file_exists\|cbfs_ro_file_exists\|cbfs_mdata\|cbfs_find_attr\|cbfs_file_hash' -- src/)|grep "<"
Change-Id: Ib4dca6da1eb66bbba5b6e94fd623f4fcfc2f0741
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch checks if CSE's spi protection mode is protected or
unprotected. Returns true if CSE's spi protection mode is protected,
otherwise false.
BUG=b:211954778
TEST=Able to build and boot brya with this change. Calling
`cse_is_hfs1_spi_protected()` in coreboot is able to provide
the SPI protection status.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23f1a1c4b55d8da6e6fd0cf84bef86f49ce80cca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
3. Make dt CSE PCI device `on` by default.
4. Mainboards set DISABLE_HECI1_AT_PRE_BOOT=y to make Heci1
function disable at pre-boot instead of the dt policy that uses
`HeciEnabled = 0`.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I5c13fe4a78be44403a81c28b1676aecc26c58607
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The existing Sideband access is with the PCH P2SB. There will be future
platforms which access the TCSS registers through SBI other than the PCH
P2SB. This change abstracts the SBI with common API.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ia6201762fe92801ce6b4ed97d0eac23ac71ccd37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change adds the Primary to Sideband Bridge(B0, D31, F1)
definition for the platform in order to maintain the common block
API build.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I1c4ddfce6cc6e41b2c63f99990d105b4bbb6f175
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib9fb554c8f3cfd1e91bbcd1977905e1321db0802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4a81fd58df468e2711108a3243bf116e02986316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
verstage_mainboard_espi_init in mb/guybrush/verstage.c still accesses
some of the registers directly.
BUG=b:183149183
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2f48d1c62b48866d8d942f1586bcb72017b8dd72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add the UPD PcieRpSlotImplemented as devicetree option. To keep the PI
bit set for any slots of already existing boards, add set the option
PcieRpSlotImplemented=1 where appropriate.
Change-Id: Ia6f685df3c22c74ae764693329a69817bf3cd01d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Make use of the helper introduced in the parent change to deduplicate
the PCIe root port table.
Change-Id: I2dae4e4caf0a7ba3662889f3b31da0c3c299bc92
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add TGL-H support for the recently introduced code for differentiating
CPU and PCH root ports by adding the missing TGL-H port map.
Change-Id: Id2911cddeb97d6c164662e2bef4fdeece10332a8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since we need the GPIO defines in the devicetree settings, include
gpio.h in each SoC's chip.h file which will indirectly include the
soc-specific soc/gpio.h header instead of having it indirectly included
via soc/i2c.h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id26721a6b8ae94784d4a90d7ccac28fef2be36dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
The headers added are generated as per FSP v2511_04
Previous FSP version was v2471_02
Changes include:
- UPDs description update in FspsUpd.h and FspmUpd.h
- Adjust UPD Offset in FspmUpd.h
- Name change of UPDs in FspmUpd.h and FspsUpd.h
- Copyright year is updated in FspmUpd.h and FspsUpd.h
- Updated spd_upds and dq_upds structure variables in meminit.c
- Updated structure member of s_cfg->LpmStateEnableMask to PmcLpmS0ixSubStateEnableMask
in fsp_params.c
BUG=b:213959910
BRANCH=None
TEST=Build and boot brya
Cq-Depend: chrome-internal:4448696, chrome-internal:4445910
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.corp-partner.google.com>
Change-Id: I39646c6812afbf622171361b8206daeacdaafac0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Fix the name of the include guard for
soc/mediatek/common/include/soc/emi.h.
BUG=none
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: Iddac3467959545b7db141545aaa2a135536f44f1
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Xi Chen <xixi.chen@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
|
|
This patch replaces hardcoded `4` (next offset Tx state) with
`sizeof(uint32_t)` for calculating 'Tx state offset'.
Also, add checks to detect the specific GPIO lock action between
`LOCK_CONFIG` or 'LOCK_TX'.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iff712b16808e0bc99c575bb2426a4f84b89fdb73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Remove vbp & hbp as the names are misleading and use edid variables
to simplify the video mode active and total calculations.
Change-Id: I9ccafabe226fa53c6f82e32413d4c00a0b4531be
Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Currently coreboot and EC had different logic to interpret TCSS port
number which would break retimer update functionality since coreboot
would pass wrong port information to EC.
This change clones the implementation on Alder Lake which converts
the phyiscal port mapping to EC's abstract port mapping.
BUG=b:207057940
BRANCH=None
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: If4451598dbb83528ae6d88dbc1b65c206f24fe1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
TGL-LP only has 12 root ports, not 20. Correct the port map.
Change-Id: I3f5c69a2e7e3a2b8292c81beeac4ea6c7279d4b4
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The existing common AMD SoC code supports some of AMD Family 17h Model
A0h SoC's PCI devices that however have different PCI IDs. Add the new
PCI ID defines to the PCI ID lists of the common PCI drivers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I50960e502c63a2ffcfed35178c5e7c9729ef061e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
uintptr_t is defined in stdint.h which gets included by types.h. I use
types.h instead of stdint.h, since that's also what the Picasso code
does.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id3d0811d831b5acc9343398f4d28c73467c0a429
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a8c21c462258c8a419ccc3f2db50f74a154e465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This patch makes DISABLE_HECI1_AT_PRE_BOOT=y default for Apollo Lake
and ensures disable_heci1() is guarded against this config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7ac0cad97fcd42b2c6386693319d863352356864
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Move the `configure_pmc_descriptor()` function to SoC scope instead of
having two identical copies in mainboard scope. Add a Kconfig option to
allow mainboards to decide whether to implement this workaround.
Change-Id: Ib99073d8da91a93fae9c0cebdfd73e39456cdaa8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch migrates common code API into SoC specific implementation
to drop CPU privilege level as the MSR is not consistent across
platforms.
For example: On APL/GLK, it's MSR 0x120 and CNL onwards it's MSR 0x151.
Also, include `soc/msr.h` in cpu.h to fix the compilation issue.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0b6f39509cc5457089cc15f28956833c36b567ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60898
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <delay.h>' -- src/) <(git grep -l 'get_timer_fsb(\|init_timer(\|udelay(\|mdelay(\|delay(' -- src/) |grep "<"
Change-Id: Id1e0f4cb9f6181dc2fc45e7b6cb149646111bb3e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Found using:
diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l 'memalign(\|malloc(\|calloc(\|free(' -- src/)
Change-Id: I08e1a680de9bfcc7d74e88a15abe9eef327b4961
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Found using:
diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<"
Change-Id: I9097972080499bd61981fe738be93f7b193f5813
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Found using:
diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<"
Change-Id: I2ca3a7487cbe75f9bec458f4166378a07b833bb5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<"
Change-Id: Iff7fdd679ac31a121d56746ed8efa1b3da932638
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Found using:
diff <(git grep -l '#include <timer.h>' -- src/) <(git grep -l 'NSECS_PER_SEC\|USECS_PER_SEC\|MSECS_PER_SEC\|USECS_PER_MSEC\|mono_time\|microseconds\|timeout_callback\|expiration\|timer_monotonic_get\|timers_run\|timer_sched_callback\|mono_time_set_usecs\|mono_time_set_msecs\|mono_time_add_usecs\|mono_time_add_msecs\|mono_time_cmp\|mono_time_after\|mono_time_before\|mono_time_diff_microseconds\|stopwatch\|stopwatch_init\|stopwatch_init_usecs_expire\|stopwatch_init_msecs_expire\|stopwatch_tick\|stopwatch_expired\|stopwatch_wait_until_expired\|stopwatch_duration_usecs\|stopwatch_duration_msecs\|wait_us\|wait_ms' -- src/)
Change-Id: I581f446330c4e99c587938d4eab387a51e3961e0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ic87e41a9b317cc7d0b36ece5ffd1d32068e6a33a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch adds a config to let mainboard users choose the correct
state of HECI1(CSE) device prior to handing off to payload.
`DISABLE_HECI1_AT_PRE_BOOT` config to make HECI1 function disable
at pre-boot.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7e127816c506df3ac0cf973b69021d02d05bef4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <acpi/acpi.h>' -- src/) <(git grep -l 'SLP_EN\|SLP_TYP_SHIFT\|SLP_TYP\|SLP_TYP_S\|ACPI_TABLE_CREATOR\|OEM_ID\|ACPI_DSDT_REV_\|acpi_device_sleep_states\|ACPI_DEVICE_SLEEP\|RSDP_SIG\|ASLC\|ACPI_NAME_BUFFER_SIZE\|COREBOOT_ACPI_ID\|acpi_tables\|acpi_rsdp\|acpi_gen_regaddr\|ACPI_ADDRESS_SPACE\|ACPI_FFIXEDHW_\|ACPI_ACCESS_SIZE_\|ACPI_REG_MSR\|ACPI_REG_UNSUPPORTED\|ACPI_HID_\|acpi_table_header\|MAX_ACPI_TABLES\|acpi_rsdt\|acpi_xsdt\|acpi_hpet\|acpi_mcfg\|acpi_tcpa\|acpi_tpm2\|acpi_mcfg_mmconfig\|acpi_hmat\|acpi_hmat_mpda\|acpi_hmat_sllbi\|acpi_hmat_msci\|acpi_srat\|ACPI_SRAT_STRUCTURE_\|acpi_srat_lapic\|acpi_srat_mem\|acpi_srat_gia\|CPI_SRAT_GIA_DEV_HANDLE_\|acpi_slit\|acpi_madt\|acpi_lpit\|acpi_lpi_flags\|acpi_lpi_desc_type\|ACPI_LPI_DESC_TYPE_\|acpi_lpi_desc_hdr\|ACPI_LPIT_CTR_FREQ_TSC\|acpi_lpi_desc_ncst\|acpi_vfct_image_hdr\|acpi_vfct\|acpi_ivrs_info\|acpi_ivrs_ivhd\|acpi_ivrs\|acpi_crat_header\|ivhd11_iommu_attr\|acpi_ivrs_ivhd_11\|dev_scope_type\|SCOPE_PCI_\|SCOPE_IOAPIC\|SCOPE_MSI_HPET\|SCOPE_ACPI_NAMESPACE_DEVICE\|dev_scope\|dmar_type\|DMAR_\|DRHD_INCLUDE_PCI_ALL\|ATC_REQUIRED\|DMA_CTRL_PLATFORM_OPT_IN_FLAG\|dmar_entry\|dmar_rmrr_entry\|dmar_atsr_entry\|dmar_rhsa_entry\|dmar_andd_entry\|dmar_satc_entry\|acpi_dmar\|acpi_apic_types\|LOCAL_APIC,\|IO_APIC\|IRQ_SOURCE_OVERRIDE\|NMI_TYPE\|LOCAL_APIC_NMI\|LAPIC_ADDRESS_\|IO_SAPIC\|LOCAL_SAPIC\|PLATFORM_IRQ_SOURCES\|LOCAL_X2APIC\|GICC\|GICD\|GIC_MSI_FRAME\|GICR\|GIC_ITS\|acpi_madt_lapic\|acpi_madt_lapic_nmi\|ACPI_MADT_LAPIC_NMI_ALL_PROCESSORS\|acpi_madt_ioapic\|acpi_madt_irqoverride\|acpi_madt_lx2apic\|acpi_madt_lx2apic_nmi\|ACPI_DBG2_PORT_\|acpi_dbg2_header\|acpi_dbg2_device\|acpi_fadt\|ACPI_FADT_\|PM_UNSPECIFIED\|PM_DESKTOP\|PM_MOBILE\|PM_WORKSTATION\|PM_ENTERPRISE_SERVER\|PM_SOHO_SERVER\|PM_APPLIANCE_PC\|PM_PERFORMANCE_SERVER\|PM_TABLET\|acpi_facs\|ACPI_FACS_\|acpi_ecdt\|acpi_hest\|acpi_hest_esd\|acpi_hest_hen\|acpi_bert\|acpi_hest_generic_data\|acpi_hest_generic_data_v300\|HEST_GENERIC_ENTRY_V300\|ACPI_GENERROR_\|acpi_generic_error_status\|GENERIC_ERR_STS_\|acpi_cstate\|acpi_sw_pstate\|acpi_xpss_sw_pstate\|acpi_tstate\|acpi_lpi_state_flags\|ACPI_LPI_STATE_\|acpi_lpi_state\|acpi_upc_type\|UPC_TYPE_\|acpi_ipmi_interface_type\|IPMI_INTERFACE_\|ACPI_IPMI_\|acpi_spmi\|ACPI_EINJ_\|ACTION_COUNT\|BEGIN_INJECT_OP\|GET_TRIGGER_ACTION_TABLE\|SET_ERROR_TYPE\|GET_ERROR_TYPE\|END_INJECT_OP\|EXECUTE_INJECT_OP\|CHECK_BUSY_STATUS\|GET_CMD_STATUS\|SET_ERROR_TYPE_WITH_ADDRESS\|TRIGGER_ERROR\|READ_REGISTER\|READ_REGISTER_VALUE\|WRITE_REGISTER\|WRITE_REGISTER_VALUE\|NO_OP\|acpi_gen_regaddr1\|acpi_einj_action_table\|acpi_injection_header\|acpi_einj_trigger_table\|set_error_type\|EINJ_PARAM_NUM\|acpi_einj_smi\|EINJ_DEF_TRIGGER_PORT\|FLAG_PRESERVE\|FLAG_IGNORE\|EINJ_REG_MEMORY\|EINJ_REG_IO\|acpi_einj\|acpi_create_einj\|fw_cfg_acpi_tables\|preload_acpi_dsdt\|write_acpi_tables\|acpi_fill_madt\|acpi_fill_ivrs_ioapic\|acpi_create_ssdt_generator\|acpi_write_bert\|acpi_create_fadt\|acpi_fill_fadt\|arch_fill_fadt\|soc_fill_fadt\|mainboard_fill_fadt\|acpi_fill_gnvs\|acpi_fill_cnvs\|update_ssdt\|update_ssdtx\|acpi_fill_lpit\|acpi_checksum\|acpi_add_table\|acpi_create_madt_lapic\|acpi_create_madt_ioapic\|acpi_create_madt_irqoverride\|acpi_create_madt_lapic_nmi\|acpi_create_madt\|acpi_create_madt_lapics\|acpi_create_madt_lapic_nmis\|acpi_create_madt_lx2apic\|acpi_create_srat_lapic\|acpi_create_srat_mem\|acpi_create_srat_gia_pci\|acpi_create_mcfg_mmconfig\|acpi_create_srat_lapics\|acpi_create_srat\|acpi_create_slit\|acpi_create_hmat_mpda\|acpi_create_hmat\|acpi_create_vfct\|acpi_create_ipmi\|acpi_create_ivrs\|acpi_create_crat\|acpi_create_hpet\|acpi_write_hpet\|generate_cpu_entries\|acpi_create_mcfg\|acpi_create_facs\|acpi_create_dbg2\|acpi_write_dbg2_pci_uart\|acpi_create_dmar\|acpi_create_dmar_drhd\|acpi_create_dmar_rmrr\|acpi_create_dmar_atsr\|acpi_create_dmar_rhsa\|acpi_create_dmar_andd\|acpi_create_dmar_satc\|cpi_dmar_\|acpi_create_\|acpi_write_hest\|acpi_soc_get_bert_region\|acpi_resume\|mainboard_suspend_resume\|acpi_find_wakeup_vector\|ACPI_S\|acpi_sleep_from_pm1\|acpi_get_preferred_pm_profile\|acpi_get_sleep_type\|acpi_get_gpe\|permanent_smi_handler\|acpi_s3_resume_allowed\|acpi_is_wakeup_s3\|acpi_align_current\|get_acpi_table_revision' -- src/) |grep "<"
Change-Id: I810f6c78a070da554a65914e94b13e354f97f995
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
"memcpy" needs <string.h>
Change-Id: I5b7b3a94acbb7e4f9614fcf3f06d68e6ac72f4f1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fixes: 5b94cd9e9d ("soc/intel/common: Include Alder Lake-N device IDs")
Change-Id: I24c2bdb9e4a9eb873b52668a41f4c0e944ed7818
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
We support all the ADL-P 15W/28W/45W SKU's and map them with the
latest VR configurations. These config values are generated by iPDG
application with ADL-P platform package tool.
RDC Kit ID for the iPDG tools
* Intel(R) Platform Design Studio Installer: 610905
* Intel(R) Platform Design Studio - Libraries: 613643
* Intel(R) Platform Design Studio - Platform ADL-P (Partial): 627345
* Intel(R) Platform Design Studio - Platform ADL-P (Full): 630261
BUG=b:211365920
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ida7a6df0422a9a3972646cb3bdd0112b5efa2755
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Enable CPPC entries generation, needed for Intel SpeedShift.
This can be tested by checking sysfs in Linux:
$ grep . /sys/devices/system/cpu/cpu?/acpi_cppc/*perf
The output should look like this, while the values may differ:
/sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf:28
/sys/devices/system/cpu/cpu0/acpi_cppc/lowest_nonlinear_perf:5
/sys/devices/system/cpu/cpu0/acpi_cppc/lowest_perf:1
/sys/devices/system/cpu/cpu0/acpi_cppc/nominal_perf:24
/sys/devices/system/cpu/cpu1/acpi_cppc/highest_perf:28
/sys/devices/system/cpu/cpu1/acpi_cppc/lowest_nonlinear_perf:5
...
Change-Id: I910b4e17d4044f1bf1ecfa0643ac62fc7a8cb51b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
|
|
FSP reserved memory is allocated inside cbmem which already gets
marked as a reserved memory region, so there is no need to do this
explicitly.
Change-Id: I39ec70bd9404d7bc2a4228c4364e4cc86f95d7c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
In order to make SC7180 boards compatbile with some optional Kconfigs,
increase the bootblock size a bit and add room for a TCPA log buffer to
memlayout. The large pre-RAM CBFS cache wasn't really needed anymore
anyway since we switched QcLib to use LZ4 compression.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I7321cca9d7b79368115c57f156b8e71657802a41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
The PMC IPC method that is used for RTD3 support expects to be provided
the virtual wire index instead of the LCAP PN for CPU PCIe RPs.
Therefore, use the prior patches to update pcie_rp for CPU RPs.
Note that an unused argument to pcie_rtd3_acpi_method_status() was also
dropped.
BUG=b:197983574
TEST=add rtd3 node under pcie4_0 in overridetree for brya0, boot and
inspect the SSDT to see the PMC IPC parameters are as expected for the
CPU RP, and the ModPhy power gating code is not found in the AML for the
PEG port.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: Tim Crawford <tcrawford@system76.com>
Change-Id: I84a1affb32cb53e686dbe825d3c3a424715df873
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60183
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Alder Lake chip.h file has pcie_rp_config entries for the CPU PCIe
ports, but the UPDs are not set. This patch hooks up those config
structs to the appropriate FSP-S UPDs.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ibb2375e66d53b4b7567dbe88b941cd720fdad927
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
When using a mixed memory topology with DDR4, it's not possible to boot
when no DIMMs are installed, even though memory-down is available. This
happens because the DIMM SPD length defaults to 256 when no DIMM SPD is
available. Relax the length check when no DIMMs are present to overcome
this problem.
Tested on system76/lemp10. Unit boots with and without DIMM installed.
Change-Id: I1cabf64fade1c06a44b6c3892659d54febc7a79a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
We need to protect debugsys for firmware image without serial console.
Original settings for protecting debugsys is wrong which will cause some
hardware modules to fail to set their registers correctly.
We move the setting from MM_AO_APC to INFRA_AO_APC because the setting
of debugsys is defined in INFRA_AO_APC and set the debugsys index to
correct value of 94.
BUG=b:213125558
TEST=all modules work normally using image without serial console.
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: Ibce626386ac1f8de42f8717c4ad9ba403640b3ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60833
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DFD (Design for Debug) is a debugging tool, which scans flip-flops
and dumps to internal RAM on the WDT reset. After system reboots,
those values can be shown for debugging using MTK internal parsing
tools.
BUG=b:202871018
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I7b711755022b5d9767019611151fea65e71edc66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60828
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In some cases, partner may assign same clkreq on more than one devices.
This could happen when one device is in baseboard dev tree and another
one is in override dev tree.
This change adds a clkreq overlap check and shows a warning message
TEST=On brya, assigned one clkreq to 2 devices and found the warning
message
Change-Id: I2f701a19118f4702c227b17e43b6551591d9b344
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22f3485ec81f76af7e0e96b7c1271d5ccf52e701
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Define the register offsets and bits in a separate header file instead
of in the middle of the .c file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I814192b2dfeff05877ac857dd89e8cdc7ae5ee25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
coreboot uses lower case hex digits instead of upper case ones.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0955db7afd101ab522845d5911ff971408e520e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60769
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In espi_wait_channel_ready the return value of espi_get_configuration
didn't get checked before. In the case of the espi_send_command call in
espi_get_configuration returning CB_ERR, espi_get_configuration didn't
write to the local config variable, so if this happens in the first pass
of the do-while loop, the following espi_slave_is_channel_ready call
would use the uninitialized local config variable as parameter. Fix this
by checking the return value of espi_get_configuration.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iff1a0670e17b9d6c6f4daf2ea56badf6c428b8c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add minimal Device entries with just an _ADR for each of the PEG ports
for P and M chipsets (N does not have any PEG ports).
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id1009004969729eddf7005fa190f5e1ca2d7b468
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The PMC IPC method used to enable/disable PCIe srcclks uses the
LCAP PN field to distinguish PCH RPs. For CPU RPs, the PMC IPC
command expects the RP number to be its "virtual wire index"
instead. This new function returns this virtual wire index
for each of the CPU PCIe RPs.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I5e9710f0d210396f9306b948d9dce8b847300147
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The PMC IPC method used to enable/disable PCIe clk sources uses the
LCAP PN field to distinguish PCH RPs. For CPU RPs, the PMC IPC
command expects the RP number to be its "virtual wire index"
instead. This new function returns this virtual wire index
for each of the CPU PCIe RPs.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7aa14a634dcd90c4817009db970fb209ae02c63d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Don't perform GPP lock configuration if
SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS config is not selected.
This patch fixes a compilation issue when APL/GLK boards are
failing while gpio_lock_pads() function is getting called from
IA common gpio block.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I392dc2007dba8169e480f82b58b7f0a1578bb09f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch modifies struct pad_config.pad type from `int` to 'gpio_t'
as pad offset inside GPIO community is unsigned type and also to
maintain parity with `struct gpio_lock_config.pad` type.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I15da8a1aff2d81805ba6584f5cc7e569faf456e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This patch renames struct gpio_lock_config variable `gpio` to `pad`,
to represent the pad offset within the GPIO community.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6bed99c401435c96c9543f99406a934d7141c575
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This patch fixes the documentation discrepancy of GPIO reset type
between PCH EDS and GPIO BWG. As per GPIO BWG, there are four GPIO
reset types in Alder Lake as below:
- Power Good - (Value 00)
- Deep - (Value 01)
- Host Reset/PLTRST - (Value 10)
- RSMRST for GPD/Reserved for GPP - (Value 11)
Hence, created two different reset types for `GPP` and `GPD`.
Also, replaced PAD_CFG0_LOGICAL_RESET_x macros with PAD_RESET().
BUG=b:213293047
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4b8742c7a0cc1dc420e3e22e34a16355294ed61b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The current CBFS mcache size (roughly 7KiB) is insufficient for mt8186,
so we need to increase it by 1KiB (and decrease the stack by 1KiB).
Error logs:
CBFS ERROR: mcache overflow, should increase CBFS_MCACHE size!
CBFS: mcache @0x0010e004 built for 63 files, used 0xde4 of 0xdfc bytes
BUG=b:202871018
TEST=no cbfs error logs.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I1e627ede3774665575006f752f89101e3c5bde9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60529
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <delay.h>' -- src/) <(git grep -l 'get_timer_fsb(\|init_timer(\|udelay(\|mdelay(\|delay(' -- src/) |grep "<"
Change-Id: Iefb37d28c7f13563fa652cd6b2f661f462a3a32e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Id8e6221a9801d5198171dc9cd564000d19720a42
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I414ad3824819f441f316567795999ed9539cba7b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I8f88541dce457e978a2cbea036d4f6eae387963f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: Ibd3e7a62a2e833017f550eddd915b7dfb539d019
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Found using following command:
diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy(\|memmove(\|memset(\|memcmp(\|memchr(\|strdup(\|strconcat(\|strnlen(\|strlen(\|strchr(\|strncpy(\|strcpy(\|strcmp(\|strncmp(\|strspn(\|strcspn(\|strstr(\|strtok_r(\|strtok(\|atol(\|strrchr(\|skip_atoi(\|vsnprintf(\|snprintf(' -- src/)
Change-Id: Iae90ff482f534d8de2a519619c20a019d054e700
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Building an image for the Purism Mini v2 with `x86_64-linux-gnu-gcc-11`
fails with the format warning below as the size of size_t differs
between 32-bit and 64-bit.
CC ramstage/soc/intel/common/block/acpi/pep.o
src/soc/intel/common/block/acpi/pep.c: In function 'read_pmc_lpm_requirements':
src/soc/intel/common/block/acpi/pep.c:57:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
57 | printk(BIOS_ERR, "Failed to retrieve LPM substate registers"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~
| |
| size_t {aka unsigned int}
src/soc/intel/common/block/acpi/pep.c:58:62: note: format string is defined here
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~~^
| |
| long unsigned int
| %u
src/soc/intel/common/block/acpi/pep.c:57:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
57 | printk(BIOS_ERR, "Failed to retrieve LPM substate registers"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~
| |
| size_t {aka unsigned int}
src/soc/intel/common/block/acpi/pep.c:58:71: note: format string is defined here
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~~^
| |
| long unsigned int
| %u
The variables `i` and `j` are of type size_t, so use the corresponding
length modifier `z`.
Fixes: 2eb100dd ("soc/intel/common/block/acpi: Add LPM requirements support to PEPD _DSM")
Change-Id: I27bce0a6c62b1c1ebbca732761de2f59b042a5d4
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
