summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Expand)Author
2015-04-15storm: Add watchdog reset api.Deepa Dinamani
2015-04-15ipq806x: Load TZBSP blob from coreboot ramstageVikas Das
2015-04-15storm: use different CBFS caches before and after DRAM is availableVadim Bendebury
2015-04-15storm: configure/enable vboot2 supportVadim Bendebury
2015-04-15ipq8064: add DRAM initialization codeVadim Bendebury
2015-04-15ipq806x: add i2c driverVadim Bendebury
2015-04-15google/storm: prepare enabling vboot2Vadim Bendebury
2015-04-15ipq806x: modify imem layoutDeepa Dinamani
2015-04-15soc/ipq806x: Disable LPAE mode.Deepa Dinamani
2015-04-15ipq806x: set architecture to ARMV7Vadim Bendebury
2015-04-15broadwell: Fixes for _SWS supportDuncan Laurie
2015-04-15broadwell: Remove unused bootblock codeDuncan Laurie
2015-04-15broadwell: Clean up ME device and add new ME10 flowDuncan Laurie
2015-04-15soc/baytrail: Use microcode from the blobs repositoryMarc Jones
2015-04-15soc/broadwell: Use microcode from the blobs repositoryMarc Jones
2015-04-15rk3288: send correct EDID buffer sizehuang lin
2015-04-15rk808: Implement RTC driverDavid Hendricks
2015-04-15veyron_*: Move PMIC_BUS to a Kconfig variableDavid Hendricks
2015-04-15rk3288: Implement support for CRYPTO module and use it in vboot hashingJulius Werner
2015-04-15veyron_*: Use common CBFS wrapperDavid Hendricks
2015-04-15veyron: Move backlight gpio control to mainboard.chuang lin
2015-04-15veyron: Trigger hard reset (via GPIO) if last reboot was caused by watchdogJulius Werner
2015-04-15veyron: Turn off SD card power in romstageJulius Werner
2015-04-15rk3288: implement spi_crop_chunk()Patrick Georgi
2015-04-14broadwell: Remove TPM device from lpc.aslDuncan Laurie
2015-04-14pistachio: implement clock setup for I2C0Ionela Voinescu
2015-04-14pistachio: Fix ROM clock base addressIonela Voinescu
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
2015-04-14pistachio: fix clocks setup codeIonela Voinescu
2015-04-14pistachio: Use 1.8433179 MHz for UART refclkDavid Hendricks
2015-04-14pistachio: increase size of bootblock to 18 KBIonela Voinescu
2015-04-14pistachio: change memory layout as to allow bigger CBFS cacheIonela Voinescu
2015-04-14pistachio: spi: use same clock edge for RX and TXIonela Voinescu
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
2015-04-14tegra132: lock down VPRAaron Durbin
2015-04-14rush: Enable dp displayJimmy Zhang
2015-04-14ryu: display: Add function to pass mode info to payloadJimmy Zhang
2015-04-14ryu: display: Set display shift clock dividerJimmy Zhang
2015-04-14rush: Configure display related clock, pad, and powerJimmy Zhang
2015-04-14rush: Add dp related parametersJimmy Zhang
2015-04-14rk3288: Fix memlayout to allow a little more bootblock spaceJulius Werner
2015-04-14rk3288: Add CBMEM console support and fix RETURN_FROM_VERSTAGEJulius Werner
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
2015-04-14storm: add ipq8064 blobs to the CBFSVadim Bendebury
2015-04-14ipq8064: use the new utility to build bootblockVadim Bendebury
2015-04-13broadwell: Work around VBIOS framebuffer issueDuncan Laurie
2015-04-13rk3288/exynos5250/exynos5420: Consolidate timer filesJulius Werner
2015-04-13rk3288: Increase PD_BUS_ACLK (SRAM clock) to improve boot speedJulius Werner
2015-04-13storm: Fix timer init order problemJulius Werner
2015-04-13ipq806x: copy i2c, qup, and gsbi drivers from depthchargeDaisuke Nojiri
2015-04-13rk3288: Move UART initialization to bootblock_mainboard_early_init()Julius Werner
2015-04-13arm: Add bootblock_mainboard_early_init() for pre-console initializationJulius Werner
2015-04-13arm: Redesign mainboard and SoC hooks for bootblockJulius Werner
2015-04-13rush: Add and select DO_SOR_INIT config optionJimmy Zhang
2015-04-13ryu: Add and select DO_DSI_INIT config optionJimmy Zhang
2015-04-13ryu: display: Move display api to mainboardJimmy Zhang
2015-04-13ryu: display: Split dc functions from dsi display codeJimmy Zhang
2015-04-13rk3288: Increase the delay after DDR reset de-assert to 10us.Dailunxue
2015-04-13t132: Add I2S1 support to funitTom Warren
2015-04-13spi: support controllers with limited transfer size capabilitiesVadim Bendebury
2015-04-13broadwell: Fix incorrect SATA port map maskWenkai Du
2015-04-13urara: add support for DMA coherent memory areaIonela Voinescu
2015-04-13t132: add RAM repair to cluster 1Yen Lin
2015-04-13broadwell: Enable double self refresh by defaultDuncan Laurie
2015-04-13pistachio: increase the size of romstage to 36KIonela Voinescu
2015-04-10rk3288: reset edp after edp clock source selecthuang lin
2015-04-10rockchip: support displayhuang lin
2015-04-10veyron: Change VCC10_LCD_PWREN_H to allowed maximum of 2.5VJulius Werner
2015-04-10tegra132: psci: add cpu_on/off supportJoseph Lo
2015-04-10tegra132: Make non-vboot2 memlayout more usefulFurquan Shaikh
2015-04-10tegra132: Change memlayout to have PRERAM and POSTRAM CBFS CacheFurquan Shaikh
2015-04-10tegra132: Bump up ramstage to 256KFurquan Shaikh
2015-04-10tegra132: prepare cpu startup in psciAaron Durbin
2015-04-10tegra132: Increase size of bootblock due to overflowTom Warren
2015-04-10tegra132: always bring up PLLDAaron Durbin
2015-04-10tegra132: rename clock_display() to clock_configure_plld()Aaron Durbin
2015-04-10tegra132: Set dc to resize the difference between framebuffer and panelJimmy Zhang
2015-04-10tegra132: Add framebuffer parametersJimmy Zhang
2015-04-10tegra132: Pass panel spec to lib_sysinfoJimmy Zhang
2015-04-10tegra132: Expand ramstage size to 208k (from 192k)Jimmy Zhang
2015-04-10tegra132: Add dsi driverJimmy Zhang
2015-04-10tegra132: Add panel mode specJimmy Zhang
2015-04-10google/rush_ryu: dsi: Enable panel related vdd and clocksJimmy Zhang
2015-04-10tegra132: Increase space for romstage in memlayoutFurquan Shaikh
2015-04-10baytrail: correct NC pin to GPO pin according to BYT platform design guideKane Chen
2015-04-10broadwell: Correct XHCI offset for USB 3.0 portsJulius Werner
2015-04-10broadwell: Set PCIe replay timeout to 0xDDuncan Laurie
2015-04-10baytrail: add code for supporting 2x ddr refresh rateKane Chen
2015-04-10broadwell: Add configuration for tuning VR for C-state operationsDuncan Laurie
2015-04-10broadwell: Preserve VbNv around cmos_initDuncan Laurie
2015-04-10broadwell: Add function to apply PRR to a range of SPI flashDuncan Laurie
2015-04-10broadwell: Turn off panel backlight in S5 SMI handlerDuncan Laurie
2015-04-10broadwell: Skip steps when disabling PCIe portDuncan Laurie
2015-04-10broadwell: Remove XHCI workarounds on WPTDuncan Laurie
2015-04-10broadwell: Only do pre-graphics delay when running option romDuncan Laurie
2015-04-10broadwell: Fix PCIe ports programming sequences to enable HSIOPCWenkai Du
2015-04-10broadwell: Update SATA Gen3 TX adjustment registersDuncan Laurie
2015-04-10broadwell: Add a few bits to finalize stepDuncan Laurie
2015-04-10baytrail: fix the coding error on PCIe L1 exit latencyKevin L Lee
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 05:49:27 +0000