summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2020-05-20soc/intel/tigerlake: Move pmc_soc_set_afterg3_en to pmutilTim Wawrzynczak
pmc.c was included in the SMM object, but only needed the one function, pmc_soc_set_afterg3_en. pmutil.c was already doing power management- related functionality, and was included in SMM, so moving pmc_soc_set_afterg3_en to pmutil.c allows pmc.c to be removed from the SMM build. Change-Id: I87f65fd10d35f1f75516e804501d5319b81a0383 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41407 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/tigerlake: Move PMC PCI resources under PMC deviceTim Wawrzynczak
Historically in coreboot, the PMC's fixed PCI resources were described by the System Agent (the MMIO resource), and eSPI/LPC (the I/O resource). This patch moves both of those to a new Intel SoC-specific function, soc_pmc_read_resources(). On TGL, this new function takes care of providing the MMIO and I/O resources for the PMC. BUG=b:156388055 TEST=verified on volteer that the resource allocator is aware of and does not touch these two resources: ("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 0 PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff flags c0000100 index 1") Also verify that the MEM resource is described in the coreboot table: ("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved") Verified the memory range is also untouchable from Linux: ("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved") Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20tigerlake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Tigerlake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on volteer system Change-Id: Iccd387d78bb45ca3de73f531a901d1d3f793d7bd Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39345 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20icelake: remove unused processor power limits configurationSumeet R Pawnikar
Remove unused processor power limit configuration parameter and function call based on common code base support for Intel Icelake SoC based platform. BRANCH=None BUG=None TEST=Built for icelake based dragonegg board. Change-Id: Id8923f2c176092b6f7acfbfb079587f88258dce8 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41236 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/tigerlake: Add devicetree configurability for IomTypeCPortPadCfgBrandon Breitenstein
In order for the SOC to be able to control the Aux line orientation for Type-C ports that do not have a retimer, the IomTypeCPortPadCfg UPD needs to be configurable through devicetree to correctly set the GPIO pins that the SOC should use to flip orientation. BUG=b:145220205 BRANCH=NONE TEST=booted Volteer proto 2 and verified that the AUX channels flip when the cable is flipped Change-Id: I2e48adb624c7922170eafb8dfcaed680f008936e Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40244 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/jasperlake: Add ACPI method to get GPIO PCR PIDAamir Bohra
Add method acpi method GPID to return the GPIO PCR port ID. This method is further planned to be used for GPIO power management configuration. TEST=Build waddledoo board Change-Id: Ic45b40bbe39e303cddcc82e0e848786b7311ab64 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-20soc/intel/common/acpi: Remove gpio community rangeAamir Bohra
Remove hardcoded gpio community range, since it might differ across the SOCs. Change-Id: I79c10669f6096537d466d1abd356d58a50fcb8f5 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-20soc/intel/broadwell: Mask lower 20 bits of TOLUD and TOLM in systemagent.aslFurquan Shaikh
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and 1 lock bit. If lock bit is set, then systemagent.asl would end up reporting the base address of low MMIO incorrectly i.e. off by 1. This change masks the lower 20 bits of TOLUD and TOM registers when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. Change-Id: I11b3ef8deda21930998471ab6e712da4c62f5b02 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/broadwell: Update systemagent.asl to ASL2.0 syntaxFurquan Shaikh
This change updates systemagent.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for auron. Change-Id: I479bb6cb7ed4c9265325c7c8621f03454f21f467 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/skylake: Mask lower 20 bits of TOLUD and TOLM in systemagent.aslFurquan Shaikh
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and 1 lock bit. If lock bit is set, then systemagent.asl would end up reporting the base address of low MMIO incorrectly i.e. off by 1. This change masks the lower 20 bits of TOLUD and TOM registers when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. Change-Id: I2ff7a30fabb7f77d13acadec1e6e4cb3a45b6139 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/skylake: Update systemagent.asl to ASL2.0Furquan Shaikh
This change updates systemagent.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for soraka. Change-Id: If8d8dd50af9a79d30f54e98f7f2fe7ce49188763 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/common/block/acpi: Fix error in shift operation for GPCLFurquan Shaikh
CB:41454 updated northbridge.asl to ASL2.0 syntax. During this, GPCL was incorrectly updated to use << (ShiftLeft) instead of >> (ShiftRight). This change fixes the error in GPCL by updating it to use >> (ShiftRight). TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for hatch. Change-Id: I36469cb3b0bcc595acf0e43808d6a574986cad68 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41519 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/amd/picasso: Add pcie root complex driverMarshall Dawson
* Declare memory and reserved areas using HOBs for regions above top of low memory. * Copy northbridge_fill_ssdt_generator from stoneyridge. BUG=b:147042464 TEST=Boot trembyle and see PCI resources in the log: PCI: 00:00.0 PCI: 00:00.0 resource base 0 size a0000 align 0 gran 0 limit 0 flags e0004200 index 0 PCI: 00:00.0 resource base a0000 size 20000 align 0 gran 0 limit 0 flags f0000200 index 1 PCI: 00:00.0 resource base c0000 size 40000 align 0 gran 0 limit 0 flags f0004200 index 2 PCI: 00:00.0 resource base 100000 size cd700000 align 0 gran 0 limit 0 flags e0004200 index 3 PCI: 00:00.0 resource base f8000000 size 4000000 align 0 gran 0 limit 0 flags f0000200 index c0010058 PCI: 00:00.0 resource base ce000000 size 2000000 align 0 gran 0 limit 0 flags f0004200 index 4 PCI: 00:00.0 resource base 100000000 size 12f340000 align 0 gran 0 limit 0 flags e0004200 index 5 PCI: 00:00.0 resource base 22f340000 size cc0000 align 0 gran 0 limit 0 flags f0004200 index 6 PCI: 00:00.0 resource base cd800000 size 800000 align 0 gran 0 limit 0 flags f0004200 index 7 PCI: 00:00.0 resource base cd7fe000 size 2000 align 0 gran 0 limit 0 flags f0004200 index 8 PCI: 00:00.0 resource base cc7fe000 size 1000000 align 0 gran 0 limit 0 flags f0004200 index 9 PCI: 00:00.0 resource base 1090000 size b0000 align 0 gran 0 limit 0 flags f0004200 index a Change-Id: I44a4a97765151fbcfe4c5d8de200e3e015aaaf2e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34424 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/amd/picasso: Add Kconfig option for the PSP bootloader filenameMartin Roth
Add option to change bootloader file. BUG=b:149934526 TEST=Change option and verify new bootloader file is used. Using the amd_blobs I can only boot using PspBootLoader_test_RV_dbg.sbin. Change-Id: Ib6597f7d4ffa0d48aead6974bd7111c987418f20 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2067598 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-20soc/amd/picasso/acpi: Improve PCI Interrupt Link DevicesRaul E Rangel
The PCI interrupt devices were only partially implemented. * Lacked support for _DIS to disable the bus. Something the kernel does while booting. * Lacked support for APIC vs PIC. This means the devices can only be used when using the PIC. By looking at the PMOD variable we can handle both PIC and APIC. This means we can stop hard coding the PCI interrupt numbers in the ACPI tables. * I removed INT[E-H] since they are not used. BUG=b:139429446, b:147042464 BRANCH=none TEST=Boot with both the APIC and PIC and saw that the link devices work as expected: PIC MODE: [ 1.959345] ACPI: PCI Interrupt Link [IRQA] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15) [ 2.007344] ACPI: PCI Interrupt Link [IRQB] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15) [ 2.056344] ACPI: PCI Interrupt Link [IRQC] (IRQs 1 3 4 5 6 7 8 9 10 11 12 *14 15) [ 2.104344] ACPI: PCI Interrupt Link [IRQD] (IRQs 1 3 4 5 6 7 8 9 10 11 12 14 *15) [ 13.752676] PCI Interrupt Link [IRQA] enabled at IRQ 6 [ 13.816755] PCI Interrupt Link [IRQD] enabled at IRQ 15 [ 27.788798] PCI Interrupt Link [IRQB] enabled at IRQ 6 [ 27.852873] PCI Interrupt Link [IRQC] enabled at IRQ 14 APIC MODE: [ 19.311764] ACPI: PCI Interrupt Link [IRQA] (IRQs *16 17 18 19 20 21 22 23) [ 19.374765] ACPI: PCI Interrupt Link [IRQB] (IRQs 16 *17 18 19 20 21 22 23) [ 19.438770] ACPI: PCI Interrupt Link [IRQC] (IRQs 16 17 *18 19 20 21 22 23) [ 19.501764] ACPI: PCI Interrupt Link [IRQD] (IRQs 16 17 18 *19 20 21 22 23) [ 34.719072] PCI Interrupt Link [IRQA] enabled at IRQ 23 [ 34.798994] PCI Interrupt Link [IRQD] enabled at IRQ 22 [ 66.469510] PCI Interrupt Link [IRQB] enabled at IRQ 21 [ 66.542395] PCI Interrupt Link [IRQC] enabled at IRQ 20 Change-Id: I1bb84813b65c89b4b5479602be3e9a9fedb7333d Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095683 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-20soc/amd/picasso/acpi: Move _PIC method to root namespaceRaul E Rangel
The _PIC method sets the interrupt model (PIC or APIC). It needs to be defined at the root level for the kernel to find it. Previously this method was never getting called, so we were always stuck in APIC mode. BUG=b:139429446, b:147042464 BRANCH=none TEST=Saw the method getting called [ 1.251774] ACPI Debug: "PIC MODE: 0000000000000001" Change-Id: Idd5e9646df8d56e7cbec2be8b4016c36d81e5fb8 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095682 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-20soc/amd/picasso/soc_util: use socket type detectionFelix Held
Remove the Kconfig options for per board socket type selection and use the runtime detection instead. Change-Id: I82cf922661c24e2a529fa4927893727b643660e3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41518 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/amd/picasso/soc_util: add socket type detection and printingFelix Held
Change-Id: I643a4c5f8a42a5fb0603a1a049545b57d16493a6 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41517 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-19soc/amd/picasso/romstage: removed unused includeFelix Held
Change-Id: I550599ae5ef9875ce820a4534d21439ff2027585 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-18soc/amd/picasso: add telemetry settingChris Wang
Add telemetry setting for SDLE testing BUG=b:147570294 TEST=Build Morphius and check the setting was been applied Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If4bb75eeaaa68b2c5a6a36c28c34fb338be65851 Reviewed-on: https://chromium-review.googlesource.com/2056885 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Tested-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-18soc/amd/picasso/romstage: add missing types.h includeFelix Held
Change-Id: I26f15e7bd2f65e94ed1c2771bd8504114bfcda48 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|atol\|strrchr\|skip_atoi\|STRINGIFY' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ibaeec213b6019dfa9c45e3424b38af0e094d0c51 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18soc/amd/picasso/Makefile: Use apcb_tool to generate APCBs from SPDsRaul E Rangel
BUG=b:147042464 TEST=Boot trembyle to OS Signed-off-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ife48d5268230f70c6a6f4a56c1f0d05b6c924891 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41381 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove unused 'include <lib.h>'Elyes HAOUAS
Change-Id: Iad5540e791075270453a136a058823c28647f93a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18soc/intel/tigerlake: Add FSP UPD TcssDma0En and TcssDma1EnJohn Zhao
This adds FSP UPD TcssDma0En and TcssDma1En for configuration. BUG=:b:146624360 TEST=Built and booted on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I04af970f74ab9dfe84f9c0c09ec2098e0093fa57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-05-18soc/amd/picasso: Switch to using amd_blobsRaul E Rangel
BUG=b:147042464 TEST=build trembyle and boot to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie6ac8b0701ac27733dd9724873664f5f17fcfa29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-18soc/amd/picasso: only link soc_util in ramstageFelix Held
No code that was or will be upstreamed uses functionality from soc_util in romstage, so only compile and link it for ramstage. This also allows to fix the SoC type detection in a follow-up patch using information that FPS-M will be providing in a HOB. BUG=b:153779573 Change-Id: If96e53608eadd562f6de5a0c370b89e84e43d049 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-18broadwell: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Broadwell SoC based platforms. BRANCH=None BUG=None TEST=Build for broadwell based platform Change-Id: I97e38a533e74a122b6809e20a10f6e425827ab9c Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18soc/intel/jasperlake: Add function to display ME firmware status infoKrishna Prasad Bhat
Add function to display ME Host Firmware Status registers. Make use of print_me_fw_version() from CSE lib to print ME firmware version information. Add manufacturing mode field in HFSTS1 register for JSL in place of, spi_protection_mode in TGL. BUG=None BRANCH=None TEST=Build and boot jslrvp. In coreboot logs, ME info can be seen. ME: Version: 13.5.0.7049 ME: HFSTS1 : 0x90006255 ME: HFSTS2 : 0x82100136 ME: HFSTS3 : 0x00000020 ME: HFSTS4 : 0x00004800 ME: HFSTS5 : 0x00000000 ME: HFSTS6 : 0x00400006 ME: Manufacturing Mode : YES ME: FW Partition Table : OK ME: Bringup Loader Failure : NO ME: Firmware Init Complete : YES ME: Boot Options Present : NO ME: Update In Progress : NO ME: D0i3 Support : YES ME: Low Power State Enabled : NO ME: CPU Replaced : YES ME: CPU Replacement Valid : YES ME: Current Working State : 5 ME: Current Operation State : 1 ME: Current Operation Mode : 0 ME: Error Code : 6 ME: CPU Debug Disabled : YES ME: TXT Support : NO Change-Id: Ic6b1c9410db8f06ac24fd997772b2ede04264bee Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-18soc/intel/tigerlake: Add PchHdaIDispCodecDisconnect overrideEric Lai
This is a missing config override in fspm_upd. iDisplay Audio Codec disconnection 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. BUG=b:156447983 TEST=None Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifbbc22d14e06713009c550cbe8a7292de64e1fdc Reviewed-on: https://review.coreboot.org/c/coreboot/+/41394 Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Skylake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on nami system Change-Id: Idc82f3d2f805b92fb3005d2f49098e55cb142e45 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18Remove new additions of "this file is part of" linesElyes HAOUAS
Change-Id: I96dfa5b531842afcf774dd33c2dfa532b5d329c6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-05-18soc/intel/common/block/smbus: Use i2c read eeprom to speedup SPD readWim Vervoorn
Reading the SPD using the SMBUS routines takes a long time because each byte or word is access seperately. Allow using the i2c read eeprom routines to read the SPD. By doing this the start address is only sent once per page. The time required to read a DDR4 SPD is reduced from 200 msec to 50 msec. BUG=N/A TEST=tested on facebook monolith Change-Id: I44e18b8ba72e1b2321f83402a6a055e2be6f940c Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-05-18soc/mediatek: dsi: adjust hfp_byte and hbp_byte if too smallPaul Ma
If panel has too small hfp or hbp, hfp_byte or hbp_byte may become very small value or negative value. When very small value or negative value is used, the panel will be scrolling or distorted. This patch adjusts their values so that they are greater than the minimum value and keep total of them unchanged. DSI transfer HBP or HFP, There are some extra packet. ex. packet header(4byte) and eof(2byte) and (next)hs packet header(4 byte). the hfp_byte = HFP * BPP - packet header(4byte) and eof(2byte) and (next)hs packet header(4 byte). So the min hfp_byte is 2 when HFP = 4. This is equivalent to the Linux kernel DSI change in: https://chromium-review.googlesource.com/c/chromiumos/third_party/ kernel/+/2186872 BUG=b:144824303 BRANCH=kukui TEST=boot damu board with panel CMN N120ACA-EA1 (12" panel and its hbp only 6), the panel can display without scrolling or distortions. Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com> Change-Id: I608c01d41ae93c8d5094647bbf3e0ae4a23d814c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41163 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18jasperlake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Jasperlake SoC based platforms. BRANCH=None BUG=None TEST=Built for jasperlake system Change-Id: I9b725d041dcb8847f83ec103e58b9571b4c596ac Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18soc/intel/common: add processor power limits control supportSumeet R Pawnikar
Add processor power limits control support under common code. BRANCH=None BUG=None TEST=Built and checked this entry on Volteer system, cat /sys/class/powercap/intel-rapl/intel-rapl\:0/* Change-Id: I41fd95949aa2b02828aa2d13d29b962cb579904a Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18soc/amd/picasso: Set VERSTAGE_ADDR for picassoRaul E Rangel
By default ROMSTAGE_ADDR and VERSTAGE_ADDR are set to 0x2000000. This causes problems in a non-xip environment because when verstage loads romstage, it overrides it's memory. So pick a different offset for verstage. BUG=b:147042464 TEST=Boot verstage on trembyle and see OS boot. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2464db6f3769bd23d250588b341d1c9e44f10d21 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41367 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/tigerlake: Fix wrong operation region for CPU to PCH methodJohn Zhao
CPU to PCH method refers to PCH ACPI operation region which was wrongly defined as SystemIO. This causes ACPI AE_LIMIT error from PM _DSW method. Change the operation region from SystemIO to SystemMemory to resolve this execution failure. BUG=b:140290596 TEST=Built and booted to kernel. _DSW method executes successfully without ACPI AE_LIMIT error. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I3965c3d891f7d3cf4a448edc0c3f7e7749a905a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-17soc/intel/common: Rename cse_is_hfs3_fw_sku_custom()Sridhar Siricilla
Rename cse_is_hfs3_fw_sku_custom() to cse_is_hfs3_fw_sku_lite() and rename custom_bp.c to cse_lite.c. Also, rename all CSE Custom SKU references to CSE Lite SKU. TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I20654bc14f0da8d21e31a4183df7a2e34394f34e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-05-17soc/intel/common/block/acpi: Mask lower 20 bits of TOLUDFurquan Shaikh
Lower 20bits of TOLUD register include 19 reserved bits and 1 lock bit. If lock bit is set, then northbridge.asl was reporting the base address of low MMIO incorrectly i.e. off by 1. This resulted in Linux kernel complaining that the MMIO window allocated to the device at the base of low MMIO is incorrect: pci 0000:00:1c.0: can't claim BAR 8 [mem 0x7fc00000-0x7fcfffff]: no compatible brw pci 0000:00:1c.0: [mem 0x7fc00000-0x7fcfffff] clipped to [mem 0x7fc00001-0x7fcfff] pci 0000:00:1c.0: bridge window [mem 0x7fc00001-0x7fcfffff] This change masks the lower 20 bits of TOLUD register when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. TEST=Verified that kernel dmesg no longer complains about the BAR at base of low MMIO. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4849367d5fa03d70c50dc97c7e84454a65d1887a Reviewed-on: https://review.coreboot.org/c/coreboot/+/41455 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-17soc/intel/common/block/acpi: Update northbridge.asl to ASL2.0 syntaxFurquan Shaikh
This change updates northbridge.asl to use ASL2.0 syntax. This increases the readability of the ASL code. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If8eabb6b934b74e69cdf4e18981082028399244d Reviewed-on: https://review.coreboot.org/c/coreboot/+/41454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-15soc/intel: Correct comment on HMRFPO_ENABLE HECI commandSridhar Siricilla
Correct comment on HMRFPO_ENABLE flow for CSE Lite SKU. In order to place CSE into SECOVER_MEI_MSG mode, below procedure has to be followed. 1. Ensure CSE boots from RO(BP1). - Set CSE's next boot partition to RO - Issue GLOBAL_RESET HECI command to reset the system 2. Send HMRFPO_ENABLE command to CSE. Further, no reset is required. TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I213e02ba3898194fa6c8fe38fab34b5c19f25aa1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41340 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14samsung/exynos5420: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I49ce6ac88c4cb7cd05ff9d78133593ce97304596 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41374 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/samsung/exynos5250: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I419be7edf289636b24b9a7d6c390866ade638de3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14soc/nvidia/tegra124: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I16f0439679471366723a0084918a20cd95834831 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41372 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/amd/stoneyridge: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources during read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I532f508936d5ec154cbcb3538949316ae4851105 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41369 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/intel: Drop ABOVE_4GB_MEM_BASE_SIZE and use cpu_phys_address_size()Furquan Shaikh
This change uses cpu_phys_address_size() to calculate the size of high MMIO region instead of a macro for each SoC. This ensures that the entire range above TOUUD that can be addressed by the CPU is used for MMIO above 4G boundary. Change-Id: I01a1a86c0c65856f9f35185c2f233c58f18f5dfe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14soc/intel: Always advertise MMIO window above 4G in ACPI tablesFurquan Shaikh
There should be no harm in advertising the MMIO window above 4G in ACPI tables unconditionally. OS can decide whether or not to use the window. This change removes the config option enable_above_4GB_mmio and instead adds the correct MMIO window (above 4G) details to ACPI tables always. Change-Id: Ie728f6ee7f396918e61b29ade862b57dac36cb08 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41276 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/intel/common/block/systemagent: Use TOUUD as base for MMIO above 4GFurquan Shaikh
This change sets the base for MMIO above 4G to TOUDD. It matches what is used by resource allocator if MMIO resources are allocated above 4G and also matches the expectation in northbridge.asl. This change also gets rid of the macro ABOVE_4GB_MEM_BASE_ADDRESS since it is now unused. BUG=b:149186922 TEST=Verified that kernel does not complain about MMIO windows above 4G. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ibbbfbdad867735a43cf57c256bf206a3f040f383 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41155 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13lib/spd_bin: add get_spd_sn functionJamie Chen
This patch adds the get_spd_sn function. It's for reading SODIMM serial number. In spd_cache implementation it can use to get serial number before reading whole SPD by smbus. BUG=b:146457985 BRANCH=None TEST=Wrote sample code to get the serial number and ran on puff. It can get the serial number correctly. Change-Id: I406bba7cc56debbd9851d430f069e4fb96ec937c Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40414 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src/mainboard: Remove unused 'include <stdlib.h>'Elyes HAOUAS
Found using following commande: diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l ' memalign\|malloc\|free' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ib2ee840a10de5c10d57aa7a75b805ef69dc8da84 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src: Remove unused '#include <stddef.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <stddef.h>' -- src/) <(git grep -l 'size_t\|ssize_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\ |MAYBE_STATIC_NONZERO\|MAYBE_STATIC_BSS\|zeroptr' -- src/)|grep '<' |grep -v vendor |grep -vF '.h' Change-Id: Ic54b1db995fe7c61b416fa5e1c4022238e4a6ad5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41150 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src: Remove unused '#include <stdint.h>'Elyes HAOUAS
unused includes of <stdin.h> found using following commande: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|uint8_t\|int16_t\|uint16_t\|int32_t\|uint32_t\|int64_t\| uint64_t\|intptr_t\|uintptr_t\|intmax_t\|uintmax_t\|s8\|u8\|s16\| u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|UINT8_MAX\|INT16_MIN\ |INT16_MAX\|UINT16_MAX\|INT32_MIN\|INT32_MAX\|UINT32_MAX\|INT64_MIN\ |INT64_MAX\|UINT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|UINTMAX_MAX' -- src/) |grep '<' |grep -v vendor |grep -vF '.h' Change-Id: Icb9b54c6abfb18d1e263665981968a4d7cccabeb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41148 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Enable eSPI capability for PicassoFurquan Shaikh
This change selects SOC_AMD_COMMON_BLOCK_HAS_ESPI which enables the capability for using eSPI on Picasso. Additionally, it also calls espi_setup() and espi_configure_decodes() if mainboard enables use of eSPI and skips LPC decodes in that case. BUG=b:153675913,b:154445472 Change-Id: I4876f1bff4305a23e8ccc48a2d0d3b64cdc9703d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-13soc/amd/picasso: Use lpc_early_init() from common lpc driverFurquan Shaikh
This change uses lpc_early_init() for enabling and configuring LPC using the common block LPC driver. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I65784b481ae598bf3a85392ae4fe281aac974097 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41273 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/common/block: Add support for configuring eSPI connection to slaveFurquan Shaikh
This change adds a helper function espi_setup() which allows SoCs to configure connection to slave. Most of the configuration is dependent upon mainboard settings in espi_config done as part of the device tree. The general flow for setup involves the following steps: 1. Set initial configuration (lowest operating frequency and single mode). 2. Perform in-band reset and set initial configuration since the settings would be lost by the reset. 3. Read slave capabilities. 4. Set slave configuration based on mainboard settings. 5. Perform eSPI host controller configuration to match the slave configuration and set polarities for VW interrupts. 6. Perform VW channel setup and deassert PLTRST#. 7. Perform peripheral channel setup. 8. Perform OOB channel setup. 9. Perform flash channel setup. 10. Enable subtractive decoding if requested by mainboard. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I872ec09cd92e9bb53f22e38d2773f3491355279e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41272 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/mediatek: improve ca53 frequency change procedureWeiyi Lu
To change frequency, the SOC PLL team suggests procedure below: First, we need to enable the intermediate clock and switch the ca53 clock source to the intermediate clock. Second, disable the armpll_ll clock output. Third, raise armpll_ll frequency and enable the clock output. The last, switch the ca53 clock source back to armpll_ll and disable the intermediate clock. BUG=b:154451241 BRANCH=jacuzzi TEST=Boots correctly on Jacuzzi. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Ib9556ba340da272fb62588f45851c93373cfa919 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41077 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13Remove new additions of "this file is part of" linesFurquan Shaikh
CB:41194 got rid of "this file is part of" lines. However, there are some changes that landed right around the same time including those lines. This change uses the following command to drop the lines from new files: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic3c1d717416f6b7e946f84748e2b260552c06a1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/41342 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Mark FCH MMIO addresses as non-postedRaul E Rangel
Immediately following FSP-S, update the data fabric routing registers to make the region between HPET and LAPIC as non-posted. If AGESA is modified to do this, we can delete data_fabric_util.c. If AGESA is modified to not program the registers, then we can simplify data_fabric_set_mmio_np(). BUG=b:147042464, b:156296146 TEST=boot trembyle Change-Id: Idbafaac158f5a4c533d2d88db79bb4d6244e5355 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41268 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Add data fabric pci_devsRaul E Rangel
The device ids are already defined in include/device/pci_ids.h as PCI_DEVICE_ID_AMD_FAM17H_DF*. BUG=b:147042464 TEST=Build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic68a1067e5976af972592d7352c40a5c66dbeb8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-13soc/amd/picasso: Add data fabric register definitionsRaul E Rangel
These are used to setup the data fabric. Definitions came from 55570-B1 Rev 3.14 - PPR for AMD Family 17h Model 18h BUG=b:147042464 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib51f6e2fd304da9948d6625608af71f25b974854 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41266 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Delete northbridgeMarshall Dawson
Family 17h devices are designed with a new internal architecture, frequently referred to as the data fabric. Although designed to behave somewhat like the older integrated northbridge designs, the D18Fx definitions are completely new. The previous northbridge.c was copied from stoneyridge which is completely different. Change-Id: Id70cbda99657249179fb8cf5e461dd6a37ec9153 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41265 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Extract reset flags from northbridge.hRaul E Rangel
These are not northbridge functions. BUG=b:147042464 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia9e7d4c7554788a9fdbfdb90e6ead60060cc4c30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41264 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Move ACP register to acp.hRaul E Rangel
This is a device specific register, not a northbridge register. BUG=b:147042464 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I97b63571e336f541dcb274e4c8c608f6fc59ff42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41263 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Move acpi_fill_mcfgRaul E Rangel
Move this with the other acpi functions. BUG=b:147042464 TEST=build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I24bd5c7d7c90968759ac745012e7bbc47f0ef6a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41262 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/common/block/psp: Remove unused northbridge headerRaul E Rangel
BUG=b:147042464 TEST=Build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5df618f69a7dcca47b9733efb3699b37fd171e90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41261 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/common/block/spi: Include mmio.h in fch_spi_ctrl.cFurquan Shaikh
fch_spi_ctrl.c uses read*()/write*() functions which are declared in arch/mmio.h. This change includes the file arch/mmio.h in fch_spi_ctrl.c. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I6540004512af1f59f5fb300a3a4818b87ad94bfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/41271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-13soc/amd/common/block/lpc: Add helper function lpc_early_init()Furquan Shaikh
This change adds a helper function lpc_early_init() which does the following things: 1. Enables LPC controller 2. Disables any LPC decodes (These can be set up later by SoC or mainboard as required). 3. Sets SPI base so that MMIO base for SPI and eSPI controllers is initialized. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I016f29339466c3fee92fe9b62a13d72297c29b8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-12soc/intel/skylake: Add ability to set root port ASPMWim Vervoorn
The default setting of the root port ASPM configuration can be overridden from the device tree by using a non zero value. BUG=N/A TEST=tested on facebook monolith Change-Id: I85c545d5eacb10f43b94228f1caf1163028645e0 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-05-12soc/intel/tigerlake: Correct IRQ interruptWonkyu Kim
Current Interrupt setting use 2nd parameters as device function number. - Correct as interrupt pin number according to _PRT package format. {Address, pin, Source, Source index} - Use irq number directly rather than irq definition as its number is not for PCI device. The issue found while enabling GBE and GBE interrupt is not working without this change. Reference - ACPI spec 6.2.13 _PRT - FSP reference code: https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/ ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/ PeiItssPolicyLibVer2.c - BIOS reference code: https://github.com/otcshare/CCG-TGL-Generic-Full/blob/master/ TigerLakeBoardPkg/Acpi/AcpiTables/Dsdt/PciTree.asl TEST=boot to OS with GBE enabled and check GBE interrupt Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I8084b30c668c155ebabbee90b5f70054813b328e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41153 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12device/pci_device: Extract pci_domain_set_resources from SOCRaul E Rangel
pci_domain_set_resources is duplicated in all the SOCs. This change promotes the duplicated function. Picasso was adding it again in the northbridge patch. I decided to promote the function instead of duplicating it. BUG=b:147042464 TEST=Build and boot trembyle. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iba9661ac2c3a1803783d5aa32404143c9144aea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12soc/intel/jasperlake: Remove deprecated UPDsRonak Kanabar
IedSize and EnableC6Dram are removed in JSL FSP v2114 so remove them from 'fsp_params.c'. BUG=155054804 BRANCH=None TEST=Build and boot JSLRVP Change-Id: I47bd3f87bdb59625098c0d734695f02d738f8bbd Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41239 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12soc/intel/jasperlake: Add SATA related UPDs configurationRonak Kanabar
This patch control SATA related UPDs based on the devicetree configuration as per each board's requirement. BUG=b:155595624 BRANCH=None TEST=Build, boot JSLRVP, Verified UPD values from FSP log Change-Id: I4f7e7508b8cd483508293ee3e7b760574d8f025f Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-05-12soc/amd/common/block/lpc: Configure io/mmio windows differently for LPC and eSPIFurquan Shaikh
This change updates lpc_enable_children_resources() to configure IO and MMIO resources differently depending upon whether the mainboard wants to setup decode windows for LPC or eSPI. BUG=b:154445472,b:153675913 Change-Id: Ie8803e934f39388aeb6e3cbd7157664cb357ab23 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-12soc/amd/common/block/lpc: Provide an option to use static eSPI BARFurquan Shaikh
This change provides a helper function espi_update_static_bar() that informs the eSPI common driver about the static BAR to use for eSPI controller instead of reading the SPIBASE. This is required to support the case of verstage running on PSP. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I1f11bb2e29ea0acd71ba6984e42573cfe914e5d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-12soc/intel/tigerlake: Control SATA and DMI power optimizationShaunak Saha
FSP provides the UPD's for SATA and DMI power optimization. In this patch we are adding the soc's config support to set those power optimization bits in FSP. By default those optimizations are enabled. To disable those we need to set the DmiPwrOptimizeDisable and SataPwrOptimizeDisable to 1 in devicetree. BUG=b:151162424 BRANCH=None TEST=Build and boot volteer and TGL RVP. Change-Id: Iefc5e7e48d69dccae43dc595dff2f824e53f5749 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-12soc/amd/common/block/lpc: Add helpers for managing eSPI decodeFurquan Shaikh
This change adds the following helper functions for eSPI decode: 1. espi_open_io_window() - Open generic IO window decoded by eSPI 2. espi_open_mmio_window() - Open generic MMIO window decoded by eSPI 3. espi_configure_decodes() - Configures standard and generic I/O windows using the espi configuration provided by mainboard in device tree. BUG=b:153675913,b:154445472 Change-Id: Idb49ef0477280eb46ecad65131d4cd7357618941 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41073 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12soc/amd/common/block: Add header file for eSPI register definitionsFurquan Shaikh
This change adds eSPI register definitions for I/O and MMIO decode using eSPI on AMD SoCs. Additionally, it also adds a macro to define the offset of ESPI MMIO base from SPI MMIO base. BUG=b:153675913 Change-Id: Ifb70ae0c63cc823334a1d851faf4dda6d1c1fc1a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12soc/amd/common/block/lpc: Set LPC_IO_PORT_DECODE_ENABLE to 0 when disabling ↵Furquan Shaikh
decodes This change sets LPC_IO_PORT_DECODE_ENABLE to 0 as part of lpc_disable_decodes() to ensure that the I/O port decodes are also disabled. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I1474f561997f2ee1231bd0fcaab4d4d4e98ff923 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12soc/amd/picasso: Use SPI configuration support from common block SPI driverFurquan Shaikh
This change switches to using the common block SPI driver for performing early SPI initialization and for re-configuring SPI speed and mode after FSP-S has run. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia3186ce59b66c2f44522a94fa52659b4942649b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-12soc/amd/picasso: Add support for using common SoC configurationFurquan Shaikh
This change adds support for using common SoC configuration by adding soc_amd_common_config to soc_amd_picasso_config and helper function to return pointer to the structure to amd common block code. Change-Id: I8bd4eac3b19c9ded2d9a3e95ac077f014730f9d1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12soc/amd/common/block/spi: Add support for common SPI configurationFurquan Shaikh
This change adds support for following SPI configuration functions to common block SPI driver and exposes them to be used by SoC: 1. fch_spi_early_init(): Sets up SPI ROM base, enables SPI ROM, enables prefetching, disables 4dw burst mode and sets SPI speed and mode. 2. fch_spi_config_modes(): This allows SoC to configure SPI speed and mode. It uses SPI settings from soc_amd_common_config to configure the speed and mode. These functions expect SoC to include soc_amd_common_config in SoC chip config and mainboard to configure these settings in device tree. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia4f231bab69e8450005dd6abe7a8e014d5eb7261 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41248 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12soc/intel/skl: Drop weak mainboard_memory_init_paramsAngel Pons
We should not need that. Change-Id: Ic0181a300670ed7ee999dafedac79f3f89bfbee9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner
2020-05-12soc/amd/common/block/lpc: Split lpc_set_spibase() into two functionsFurquan Shaikh
This change splits lpc_set_spibase() into two separate functions: lpc_set_spibase() - Sets MMIO base address for SPI controller and eSPI controller (if supported by platforms) lpc_enable_spi_rom() - Enables SPI ROM This split is done to allow setting of MMIO base independent of ROM enable bits. On platforms like Picasso, eSPI base is determined by the same register and hence eSPI can set the BAR without having to touch the enable bits. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I3f270ba1745b4bb8a403f00cd069a02e21d444be Reviewed-on: https://review.coreboot.org/c/coreboot/+/41247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-12soc/amd/common/block: Add support for common config for AMD SoCsFurquan Shaikh
This change adds support for struct soc_amd_common_config that allows multiple AMD SoCs to share common configuration. This can then be used by common/block drivers to get the required configuration from device tree. It also provides function declaration for soc_get_common_config() that needs to be provided by SoCs making use of the common configuration structure. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Idb0d797525414c99894a8e4ede65469381db7794 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41246 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11sc7180: clock: Add support to bump CPU levelsTaniya Das
Add support to configure the Silver and L3 PLLs and switch the APSS GFMUX to use the PLL to speed up the boot cores. Tested: CPU speed frequency validated for speed bump Change-Id: Iafd3b618fb72e0e8cc8dd297e4a3e16b83550883 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-11sc7180: Adjust memory allocations per upstream commentsT Michael Turney
Update memory regions, etc. Change-Id: If852fe4465fb431809570be6cdccff3ad9d9f4f0 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39362 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11trogdor: QCSDI loading depends on VB2_GBB_FLAG_RUNNING_FAFT setting flagAshwin Kumar
Change-Id: I63f35c94bc6c60934ace5fe0fd9176443059b354 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36518 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11sc7180: Fix for hang during DMA transfer in SPI-NOR flash driversatya priya
Transfer sequence used by SPI-Flash application present in CB/DC. 1. Assert CS through GPIO 2. Data transfer through QSPI (involves construction of command descriptor for multiple read/write transfers) 3. De-assert CS through GPIO. With above sequence, in DMA mode we dont have the support for read transfers that are not preceded by write transfer in QSPI controller. Ex: "write read read read" sequence results in hang during DMA transfer, where as "write read write read" sequence has no issue. As we have application controlling CS through GPIO, we are making fragment bit "set" for all transfers, which keeps CS in asserted state although the ideal way to operate CS is through QSPI controller. Change-Id: Ia45ab793ad05861b88e99a320b1ee9f10707def7 Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39807 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11soc/amd/common/block/lpc: Reorganize LPC enable resourcesFurquan Shaikh
This change moves all the logic for setting up decode windows for LPC under configure_child_lpc_windows() which is called from lpc_enable_children_resources(). This is in preparation to configure decode windows for eSPI differently if mainboard decides to use eSPI instead of LPC. Side-effect of this change is that the IO decode registers are written after each child device resources are considered. BUG=b:154445472 Change-Id: Ib8275bc4ce51cd8afd390901ac723ce71c7a9148 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41070 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11soc/amd/common/block/lpc: Add config options for eSPIFurquan Shaikh
eSPI on Picasso is configured using the LPC bridge configuration registers. This change enables config options to allow SoC to select if it supports eSPI (SOC_AMD_COMMON_BLOCK_HAS_ESPI) and mainboard to select if it wants to use eSPI instead of LPC for talking to legacy devices and embedded controllers (SOC_AMD_COMMON_BLOCK_USE_ESPI). BUG=b:154445472 Change-Id: I15e9eb25706e09393c019eea4d61b66f17490be6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41069 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11soc/intel/quark: Revamp file headersPatrick Georgi
Remove license boiler plate in favor of SPDX headers. Where there's valuable additional information, fix up formatting. Change-Id: I801f27bd1a2b9defd5672a52c3a06eb1a12a9302 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41207 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Replace BSD-3-Clause and ISC headers with SPDX headersPatrick Georgi
Commands used: perl -i -p0e 's|\/\*[*\s]*Permission[*\s]*to[*\s]*use,[*\s]*copy,[*\s]*modify,[*\s]*and.or[*\s]*distribute[*\s]*this[*\s]*software[*\s]*for[*\s]*any[*\s]*purpose[*\s]*with[*\s]*or[*\s]*without[*\s]*fee[*\s]*is[*\s]*hereby[*\s]*granted,[*\s]*provided[*\s]*that[*\s]*the[*\s]*above[*\s]*copyright[*\s]*notice[*\s]*and[*\s]*this[*\s]*permission[*\s]*notice[*\s]*appear[*\s]*in[*\s]*all[*\s]*copies.[*\s]*THE[*\s]*SOFTWARE[*\s]*IS[*\s]*PROVIDED[*\s]*.*AS[*\s]*IS.*[*\s]*AND[*\s]*THE[*\s]*AUTHOR[*\s]*DISCLAIMS[*\s]*ALL[*\s]*WARRANTIES[*\s]*WITH[*\s]*REGARD[*\s]*TO[*\s]*THIS[*\s]*SOFTWARE[*\s]*INCLUDING[*\s]*ALL[*\s]*IMPLIED[*\s]*WARRANTIES[*\s]*OF[*\s]*MERCHANTABILITY[*\s]*AND[*\s]*FITNESS.[*\s]*IN[*\s]*NO[*\s]*EVENT[*\s]*SHALL[*\s]*THE[*\s]*AUTHOR[*\s]*BE[*\s]*LIABLE[*\s]*FOR[*\s]*ANY[*\s]*SPECIAL,[*\s]*DIRECT,[*\s]*INDIRECT,[*\s]*OR[*\s]*CONSEQUENTIAL[*\s]*DAMAGES[*\s]*OR[*\s]*ANY[*\s]*DAMAGES[*\s]*WHATSOEVER[*\s]*RESULTING[*\s]*FROM[*\s]*LOSS[*\s]*OF[*\s]*USE,[*\s]*DATA[*\s]*OR[*\s]*PROFITS,[*\s]*WHETHER[*\s]*IN[*\s]*AN[*\s]*ACTION[*\s]*OF[*\s]*CONTRACT,[*\s]*NEGLIGENCE[*\s]*OR[*\s]*OTHER[*\s]*TORTIOUS[*\s]*ACTION,[*\s]*ARISING[*\s]*OUT[*\s]*OF[*\s]*OR[*\s]*IN[*\s]*CONNECTION[*\s]*WITH[*\s]*THE[*\s]*USE[*\s]*OR[*\s]*PERFORMANCE[*\s]*OF[*\s]*THIS[*\s]*SOFTWARE.[*\s]*\*\/|/* SPDX-License-Identifier: ISC */|s' $(cat filelist) perl -i -p0e 's|(\#\#*)\s*Permission[\#\s]*to[\#\s]*use,[\#\s]*copy,[\#\s]*modify,[\#\s]*and.or[\#\s]*distribute[\#\s]*this[\#\s]*software[\#\s]*for[\#\s]*any[\#\s]*purpose[\#\s]*with[\#\s]*or[\#\s]*without[\#\s]*fee[\#\s]*is[\#\s]*hereby[\#\s]*granted,[\#\s]*provided[\#\s]*that[\#\s]*the[\#\s]*above[\#\s]*copyright[\#\s]*notice[\#\s]*and[\#\s]*this[\#\s]*permission[\#\s]*notice[\#\s]*appear[\#\s]*in[\#\s]*all[\#\s]*copies.[\#\s]*THE[\#\s]*SOFTWARE[\#\s]*IS[\#\s]*PROVIDED[\#\s]*.*AS[\#\s]*IS.*[\#\s]*AND[\#\s]*THE[\#\s]*AUTHOR[\#\s]*DISCLAIMS[\#\s]*ALL[\#\s]*WARRANTIES[\#\s]*WITH[\#\s]*REGARD[\#\s]*TO[\#\s]*THIS[\#\s]*SOFTWARE[\#\s]*INCLUDING[\#\s]*ALL[\#\s]*IMPLIED[\#\s]*WARRANTIES[\#\s]*OF[\#\s]*MERCHANTABILITY[\#\s]*AND[\#\s]*FITNESS.[\#\s]*IN[\#\s]*NO[\#\s]*EVENT[\#\s]*SHALL[\#\s]*THE[\#\s]*AUTHOR[\#\s]*BE[\#\s]*LIABLE[\#\s]*FOR[\#\s]*ANY[\#\s]*SPECIAL,[\#\s]*DIRECT,[\#\s]*INDIRECT,[\#\s]*OR[\#\s]*CONSEQUENTIAL[\#\s]*DAMAGES[\#\s]*OR[\#\s]*ANY[\#\s]*DAMAGES[\#\s]*WHATSOEVER[\#\s]*RESULTING[\#\s]*FROM[\#\s]*LOSS[\#\s]*OF[\#\s]*USE,[\#\s]*DATA[\#\s]*OR[\#\s]*PROFITS,[\#\s]*WHETHER[\#\s]*IN[\#\s]*AN[\#\s]*ACTION[\#\s]*OF[\#\s]*CONTRACT,[\#\s]*NEGLIGENCE[\#\s]*OR[\#\s]*OTHER[\#\s]*TORTIOUS[\#\s]*ACTION,[\#\s]*ARISING[\#\s]*OUT[\#\s]*OF[\#\s]*OR[\#\s]*IN[\#\s]*CONNECTION[\#\s]*WITH[\#\s]*THE[\#\s]*USE[\#\s]*OR[\#\s]*PERFORMANCE[\#\s]*OF[\#\s]*THIS[\#\s]*SOFTWARE.\s(\#* *\n)*|\1 SPDX-License-Identifier: ISC\n\n|s' $(cat filelist) perl -i -p0e 's|\/\*[*\s]*Redistribution[*\s]*and[*\s]*use[*\s]*in[*\s]*source[*\s]*and[*\s]*binary[*\s]*forms,[*\s]*with[*\s]*or[*\s]*without[*\s]*modification,[*\s]*are[*\s]*permitted[*\s]*provided[*\s]*that[*\s]*the[*\s]*following[*\s]*conditions[*\s]*are[*\s]*met:[*\s]*[1. ]*Redistributions[*\s]*of[*\s]*source[*\s]*code[*\s]*must[*\s]*retain[*\s]*the[*\s]*above[*\s]*copyright[*\s]*notice,[*\s]*this[*\s]*list[*\s]*of[*\s]*conditions[*\s]*and[*\s]*the[*\s]*following[*\s]*disclaimer.[*\s]*[*\s]*[2. ]*Redistributions[*\s]*in[*\s]*binary[*\s]*form[*\s]*must[*\s]*reproduce[*\s]*the[*\s]*above[*\s]*copyright[*\s]*notice,[*\s]*this[*\s]*list[*\s]*of[*\s]*conditions[*\s]*and[*\s]*the[*\s]*following[*\s]*disclaimer[*\s]*in[*\s]*the[*\s]*documentation[*\s]*and.or[*\s]*other[*\s]*materials[*\s]*provided[*\s]*with[*\s]*the[*\s]*distribution.[*\s]*[3. ]*.*used[*\s]*to[*\s]*endorse[*\s]*or[*\s]*promote[*\s]*products[*\s]*derived[*\s]*from[*\s]*this[*\s]*software[*\s]*without[*\s]*specific[*\s]*prior[*\s]*written[*\s]*permission.[*\s]*THIS[*\s]*SOFTWARE[*\s]*IS[*\s]*PROVIDED.*AS[*\s]*IS.*[*\s]*AND[*\s]*ANY[*\s]*EXPRESS[*\s]*OR[*\s]*IMPLIED[*\s]*WARRANTIES,[*\s]*INCLUDING,[*\s]*BUT[*\s]*NOT[*\s]*LIMITED[*\s]*TO,[*\s]*THE[*\s]*IMPLIED[*\s]*WARRANTIES[*\s]*OF[*\s]*MERCHANTABILITY.*FITNESS[*\s]*FOR[*\s]*A[*\s]*PARTICULAR[*\s]*PURPOSE.*ARE[*\s]*DISCLAIMED.[*\s]*IN[*\s]*NO[*\s]*EVENT[*\s]*SHALL.*LIABLE[*\s]*FOR[*\s]*ANY[*\s]*DIRECT,[*\s]*INDIRECT,[*\s]*INCIDENTAL,[*\s]*SPECIAL,[*\s]*EXEMPLARY,[*\s]*OR[*\s]*CONSEQUENTIAL[*\s]*DAMAGES[*\s]*.INCLUDING,[*\s]*BUT[*\s]*NOT[*\s]*LIMITED[*\s]*TO,[*\s]*PROCUREMENT[*\s]*OF[*\s]*SUBSTITUTE[*\s]*GOODS[*\s]*OR[*\s]*SERVICES;[*\s]*LOSS[*\s]*OF[*\s]*USE,[*\s]*DATA,[*\s]*OR[*\s]*PROFITS;[*\s]*OR[*\s]*BUSINESS[*\s]*INTERRUPTION.[*\s]*HOWEVER[*\s]*CAUSED[*\s]*AND[*\s]*ON[*\s]*ANY[*\s]*THEORY[*\s]*OF[*\s]*LIABILITY,[*\s]*WHETHER[*\s]*IN[*\s]*CONTRACT,[*\s]*STRICT[*\s]*LIABILITY,[*\s]*OR[*\s]*TORT[*\s]*.INCLUDING[*\s]*NEGLIGENCE[*\s]*OR[*\s]*OTHERWISE.[*\s]*ARISING[*\s]*IN[*\s]*ANY[*\s]*WAY[*\s]*OUT[*\s]*OF[*\s]*THE[*\s]*USE[*\s]*OF[*\s]*THIS[*\s]*SOFTWARE,[*\s]*EVEN[*\s]*IF[*\s]*ADVISED[*\s]*OF[*\s]*THE[*\s]*POSSIBILITY[*\s]*OF[*\s]*SUCH[*\s]*DAMAGE.[*\s]*\*\/|/* SPDX-License-Identifier: BSD-3-Clause */|s' $(cat filelist) $1 perl -i -p0e 's|(\#\#*) *Redistribution[\#\s]*and[\#\s]*use[\#\s]*in[\#\s]*source[\#\s]*and[\#\s]*binary[\#\s]*forms,[\#\s]*with[\#\s]*or[\#\s]*without[\#\s]*modification,[\#\s]*are[\#\s]*permitted[\#\s]*provided[\#\s]*that[\#\s]*the[\#\s]*following[\#\s]*conditions[\#\s]*are[\#\s]*met:[\#\s]*[*1. ]*Redistributions[\#\s]*of[\#\s]*source[\#\s]*code[\#\s]*must[\#\s]*retain[\#\s]*the[\#\s]*above[\#\s]*copyright[\#\s]*notice,[\#\s]*this[\#\s]*list[\#\s]*of[\#\s]*conditions[\#\s]*and[\#\s]*the[\#\s]*following[\#\s]*disclaimer.[\#\s]*[*2. ]*Redistributions[\#\s]*in[\#\s]*binary[\#\s]*form[\#\s]*must[\#\s]*reproduce[\#\s]*the[\#\s]*above[\#\s]*copyright[\#\s]*notice,[\#\s]*this[\#\s]*list[\#\s]*of[\#\s]*conditions[\#\s]*and[\#\s]*the[\#\s]*following[\#\s]*disclaimer[\#\s]*in[\#\s]*the[\#\s]*documentation[\#\s]*and.or[\#\s]*other[\#\s]*materials[\#\s]*provided[\#\s]*with[\#\s]*the[\#\s]*distribution.[\#\s]*[\#\s]*[*3. ]*.*used[\#\s]*to[\#\s]*endorse[\#\s]*or[\#\s]*promote[\#\s]*products[\#\s]*derived[\#\s]*from[\#\s]*this[\#\s]*software[\#\s]*without[\#\s]*specific[\#\s]*prior[\#\s]*written[\#\s]*permission.[\#\s]*THIS[\#\s]*SOFTWARE[\#\s]*IS[\#\s]*PROVIDED.*AS[\#\s]*IS.*[\#\s]*AND[\#\s]*ANY[\#\s]*EXPRESS[\#\s]*OR[\#\s]*IMPLIED[\#\s]*WARRANTIES,[\#\s]*INCLUDING,[\#\s]*BUT[\#\s]*NOT[\#\s]*LIMITED[\#\s]*TO,[\#\s]*THE[\#\s]*IMPLIED[\#\s]*WARRANTIES[\#\s]*OF[\#\s]*MERCHANTABILITY.*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.*ARE[\#\s]*DISCLAIMED.[\#\s]*IN[\#\s]*NO[\#\s]*EVENT[\#\s]*SHALL.*LIABLE[\#\s]*FOR[\#\s]*ANY[\#\s]*DIRECT,[\#\s]*INDIRECT,[\#\s]*INCIDENTAL,[\#\s]*SPECIAL,[\#\s]*EXEMPLARY,[\#\s]*OR[\#\s]*CONSEQUENTIAL[\#\s]*DAMAGES[\#\s]*.INCLUDING,[\#\s]*BUT[\#\s]*NOT[\#\s]*LIMITED[\#\s]*TO,[\#\s]*PROCUREMENT[\#\s]*OF[\#\s]*SUBSTITUTE[\#\s]*GOODS[\#\s]*OR[\#\s]*SERVICES;[\#\s]*LOSS[\#\s]*OF[\#\s]*USE,[\#\s]*DATA,[\#\s]*OR[\#\s]*PROFITS;[\#\s]*OR[\#\s]*BUSINESS[\#\s]*INTERRUPTION.[\#\s]*HOWEVER[\#\s]*CAUSED[\#\s]*AND[\#\s]*ON[\#\s]*ANY[\#\s]*THEORY[\#\s]*OF[\#\s]*LIABILITY,[\#\s]*WHETHER[\#\s]*IN[\#\s]*CONTRACT,[\#\s]*STRICT[\#\s]*LIABILITY,[\#\s]*OR[\#\s]*TORT[\#\s]*.INCLUDING[\#\s]*NEGLIGENCE[\#\s]*OR[\#\s]*OTHERWISE.[\#\s]*ARISING[\#\s]*IN[\#\s]*ANY[\#\s]*WAY[\#\s]*OUT[\#\s]*OF[\#\s]*THE[\#\s]*USE[\#\s]*OF[\#\s]*THIS[\#\s]*SOFTWARE,[\#\s]*EVEN[\#\s]*IF[\#\s]*ADVISED[\#\s]*OF[\#\s]*THE[\#\s]*POSSIBILITY[\#\s]*OF[\#\s]*SUCH[\#\s]*DAMAGE.\s(\#* *\n)*|\1 SPDX-License-Identifier: BSD-3-Clause\n\n|s' $(cat filelist) Change-Id: I7ff9c503a2efe1017a4666baf0b1a758a04f5634 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-11treewide: split off license text, remove extra copyright noticesPatrick Georgi
Copyright notices are best stored in AUTHORS Change-Id: Ib9025c58987ee2f7db600e038f5d3e4edc69aacc Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41203 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11soc/intel/skylake: Allow setting of PcieRpMaxPayloadWim Vervoorn
Add setting of the MaxPayload for each root port from the device tree. By default MaxPayload is set to 128 bytes. This change allows changing to 256 bytes. BUG=N/A TEST=tested on facebook monolith Change-Id: I61e1d619588a7084d52bbe101acd757cc7293cac Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-05-11soc/sifive/fu540: Add missing '#include <commonlib/bsd/helpers.h>'Elyes HAOUAS
This is used for 'KHz' (line #19) Change-Id: I4d610607b50d2fac1150deaaf94f3cb331540fbc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2020-05-11soc/intel/tigerlake: Update C-State infoWonkyu Kim
C-State latency table was exposed by both intel-idle driver and BIOS/coreboot. And table in Kernel was used before. After kernel patch (https://patchwork.kernel.org/patch/11290319/), only BIOS/coreboot exposes C-State latency table through _CST. As current C-State latency table info is not correct for Tigerlake, update proper info according to BWG and reference code. - Update latency: CpuPowerMgmt.h Use BIOS reference code as values in BWG is not up-to-dated - Remove MSR program for latency: BWG 4.6.4.3.4 Reference: - TGL BWG #611569 Rev 0.7.6 - https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/ ClientOneSiliconPkg/Cpu/Include/CpuPowerMgmt.h BUG=b:155223704 BRANCH=None TEST=Boot to OS and check C-State latency expected result >cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency} POLL C1_ACPI C2_ACPI C3_ACPI 0 1 253 1048 For detail, refer Bug info. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I8bf2976ad35b4cf6f637a99c26b4f98f9f6ee563 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-05-11soc/intel/xeon_sp: make CPX ramstage.h common for CPX, SKXMichael Niewöhner
CB:41106 revealed that mb/intel/cedarisland already sets FSP-S UPD (see CB:40735) while the required includes are still missing in CPX. Buildbot did not fail because `ramstage.c` never was (implicitly) included. Fix this problem by making SKX/CPX share a common ramstage header for now by moving the one from SKX. Test: Build cedarisland_crb Change-Id: I9cd25edd167ec71ee98c7ffa4fa6f95ca73a75e9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 08:26:36 +0000