aboutsummaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2017-06-07Use more secure HTTPS URLs for coreboot sitesPaul Menzel
The coreboot sites support HTTPS, and requests over HTTP with SSL are also redirected. So use the more secure URLs, which also saves a request most of the times, as nothing needs to be redirected. Run the command below to replace all occurences. ``` $ git grep -l -E 'http://(www.|review.|)coreboot.org' | xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g' ``` Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-06soc/intel/skylake: Use PCI IDs from device/pci_ids.hSubrata Banik
Remove PCI IDs inclusion from soc header rather referring those from device/pci_ids.h. Change-Id: I490da3e336fb6f8194d5fba800132f550ed5ab37 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-06soc/intel/skylake/chip.h: Reorder declarationsNico Huber
Place `tdp_pl2_override` above the FSP options as it's not an FSP option. Change-Id: Idff2b628d19ce1a80294b28c55c05ba4157d07e0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-06soc/intel/skylake/chip.h: Provide some enumsNico Huber
Provide some enums instead of unreadable comments that are usually copied all over. Change-Id: Iff551565647f28ecb226e1df633b4deec0ab0a7f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-06fsp1_1: Verify FSP_IMAGE_ID/_REV against headersNico Huber
FSP_IMAGE_ID and FSP_IMAGE_REV are defined in `FspUpdVpd.h`. Check against these to avoid mismatching definitions in coreboot and the FSP blob. Change-Id: Ic86229e7f0c2d0525b8a79add292c6c81a349aa6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-05soc/intel/apollolake: Use Intel timer common codeAamir Bohra
Change-Id: I7b415711d01ddc0d998eba62de2c2139045efa80 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-05soc/intel/skylake: Use Intel timer common codeAamir Bohra
Use timer code from soc/intel/common. This code removes monotonic timer refrence w.r.t MSR 24Mhz counter(0x637) and use tsc timer. Change-Id: I7fad620b11c9e5db128f646639c79ea58a0a574f Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-05soc/intel/common: Add common Intel timer codeAamir Bohra
Add common timer code to get tsc frequency(Mhz). Change-Id: Ifd4b24735c74c636348fc32afbcc267e384cb610 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-05soc/intel/apollolake: Add config for cpu base clock frequencyAamir Bohra
Add config for cpu base clock frequency(Mhz), use and clean up code. Change-Id: I724c48c11796aa942295d4f19cc629d4c13647e1 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/20017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-05soc/intel/skylake: Add config for cpu base clock frequencyAamir Bohra
Add config for cpu base clock frequency(Mhz) and replace current refrence from soc/cpu.h with config option. Change-Id: Idf8e85f7ae6d965fa987a4f5c4905503ee354d69 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/20016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-05soc/intel/common/block: add bios caching to fast spi moduleAaron Durbin
Add fast_spi_cache_bios_region() that sets up a variable MTRR as write-protect covering the fast spi BIOS region. Change-Id: I282c5173cc655004daf16ea2e85423aaded3648d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-04soc/broadwell: add ACPI method to generate USB port infoMatt DeVillier
Add ACPI method GPLD to generate port location data when passed visiblity info. Will be used by _PLD method in board-specific USB .asl files. Change-Id: Id6e6699fe3eaafbe6847479d45c70a1d57bd327a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-06-03soc/intel/skylake: Add macro for setting GPIO interrupt trigger mode.Kane Chen
Currently, there is no macro to set GPIO interrupt trigger mode. The purpose is to make coreboot set same trigger mode as GpioInt BUG=b:62067569 TEST=checked unused interrupt on SD_CD does not happen after s3 resume Change-Id: I42b9cd80b494e24c55b97e54cdf59bfd24dd9054 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/19992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02soc/baytrail: add ACPI method to generate USB port infoMatt DeVillier
Add ACPI method GPLD to generate port location data when passed visiblity info. Will be used by _PLD method in board-specific USB .asl files. Change-Id: Iad947ae2cd541d3407455b218c2b352b9a373718 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19973 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-02soc/baytrail: add missing USB port defsMatt DeVillier
Add device/address stub for XHCI USB port 7. Stub data will be supplemented by board-specific info added in subsequent commits. Change-Id: Iae874a9ba01e9428e07cf7ff15e663365b2354a9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02soc/broadwell: add missing USB port defsMatt DeVillier
Add device/address stubs for XHCI USB ports 7/8, 10-15. Stub data will be supplemented by board-specific info added in subsequent commits. Change-Id: Ice86bd226a70bd5996430e7a68a026cc825ba187 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19968 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-01soc/intel/apollolake: Use MCH_BASE_ADDRESS macro for APLSubrata Banik
Systemagent common code will use MCH_BASE_ADDRESS macro, hence cleaning current APL code to adhere such changes. Change-Id: Iace1cf786b08221c3955101186509ac5161c3841 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-01soc/intel/apollolake: Remove soc/pci_ids dependencyHannah Williams
and add pci ids for GLK and APL from device/pci_ids.h Change-Id: If8101fe52591b09caadfe104ca8daab4258837c7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19999 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-30tegra210: Remove fake cpu_reset()Julius Werner
The Tegra210 SoC never had a proper cpu_reset() implementation, so it's pointless to pretend there is one. Most ARM SoCs/boards only define hard_reset() at the moment anyway, so let's stick with that. Change-Id: I40f39921fa99d6dfabf818e7abe7a5732341cf4f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-27CBMEM: Clarify CBMEM_TOP_BACKUP function usageKyösti Mälkki
The deprecated LATE_CBMEM_INIT function is renamed: set_top_of_ram -> set_late_cbmem_top Obscure term top_of_ram is replaced: backup_top_of_ram -> backup_top_of_low_cacheable get_top_of_ram -> restore_top_of_low_cacheable New function that always resolves to CBMEM top boundary, with or without SMM, is named restore_cbmem_top(). Change-Id: I61d20f94840ad61e9fd55976e5aa8c27040b8fb7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-27soc/intel/skylake: Add detailed information about PME wake sourcesFurquan Shaikh
Add more fine-grained details about what device caused the PME wake event. This requires checking the PME status bit (bit 15) in PCI PM control and status register for the PCI device. BUG=b:37088992 TEST=Verifed that XHCI wake source was identified correctly: 135 | 2017-05-25 15:28:17 | ACPI Enter | S3 136 | 2017-05-25 15:28:26 | ACPI Wake | S3 137 | 2017-05-25 15:28:26 | Wake Source | PME - XHCI | 0 Change-Id: I6fc6284cd04db311f1f86b8a86d0bb708392e5d5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19925 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-27soc/intel/skylake: Add missing PCH_DEV_PCIE* definitionsFurquan Shaikh
This is required to add wake sources for PCIE PME events. BUG=b:37088992 Change-Id: Ideecdf133908b0819d7d993e1c7df1a6578cb77d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-26rockchip/rk3399: fix rk_mipi_dsi_phy_init errNickey Yang
This patch fix rk_mipi_dsi_phy_init error return. Change-Id: Ie260975ad6ed26c37aa8bb65dfcef4db2407a2da Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-25soc/intel/skylake: Implement GPIO ACPI AML generating functionsFurquan Shaikh
Implement GPIO ACPI AML generating functions that can be called by coreboot drivers to generate GPIO manipulation code in AML. Following API functions are implemented: 1. acpigen_soc_read_rx_gpio 2. acpigen_soc_get_tx_gpio 3. acpigen_soc_set_tx_gpio 4. acpigen_soc_clear_tx_gpio In addition to the API functions above, helper functions are added to gpio.asl to set/clear/get Tx value of GPIO. BUG=b:62028489 Change-Id: I77e5d0decd8929a922d06b02312378f092551667 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19828 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-24rk3399: Reshuffle memlayout to move PRERAM_CBMEM_CONSOLE further backJulius Werner
It seems that the BootROM on the RK3399 overwrites some of the earlier parts of SRAM, including the PRERAM_CBMEM_CONSOLE area. Now that we have a persistent CBMEM console we want that area to survive in case of an early (pre-CBMEM) reboot, so shuffle the layout around a bit to move it further back. (This reduces the stack size to 12KB which should still be way more than enough.) Change-Id: Ifc1e568cda334394134bba9eba75088032d2ff13 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-24soc/marvell/armada38x: Remove unused SoC armada38xFurquan Shaikh
No mainboard is actually using this SoC. Remove the code for this SoC for now. BUG=b:38430839 Change-Id: Ia35986dffda8bbd76305ef5abab6ae81cc154b0f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19824 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-24soc/intel: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Id3f05a2ea6eb5e31ca607861973d96b507208115 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/samsung/exynos5420: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Ic937cbf93b87f5e43f7d70140b47fa97bcd7757e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/qualcomm/ipq*: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I6cc8c339e008e16449fa143c1d21e23534bdaf0b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-24soc/broadcom/cygnus: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I48b242dd6226e392ed0f403051843b3ae02cd9a4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/imgtec/pistachio: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Ie4ec74fccaf25900537ccd5c146bb0a333a2754c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-24soc/rockchip: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I66b1b9635ece2381f62f2a9d6f5744d639d59163 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/mediatek/mt8173: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Ib0d6e4e8185ce1285b671af5ebcead1d42e049bc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-24soc/nvidia/tegra*: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I873b96d286655a814554bfd89f899ee87302b06d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/marvell/bg4cd: remove cosmos mainboard and bg4cd socAaron Durbin
The SoC code was never completed. It's just a skeleton that gets in the way of refactoring other code. Likewise, the mainboard was never completed either. Just remove them both. Change-Id: I8faaa9bb1b90ad2936dcdbaf2882651ebba6630c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19823 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-22soc/intel/skylake: Display FPF status of CSMEPratik Prajapati
Field Programmable Fuses (FPF) status maintained by CSME in bits 30:31 of FWSTS6 for Skylake and Kabylake. FPF committed means CSME has blown the fuses. Change-Id: If63c7874e6c894749df8100426faca0ad432384b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/19747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/common/block/uart: Add GLK UART pci idsHannah Williams
Change-Id: I08dd7a8c0d42d4ec7c6ff65a82553fe1efbcc424 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19687 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-22soc/intel/common/block: Add GLK I2C PCI IDsRavi Sarawadi
Add GLK PCI IDs for I2C to use common I2C code. Change-Id: I2144199345e6382984c367f6a77f0cbb0a93daea Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/19782 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22soc/intel/skylake: Add entry for deep Sx wakeFurquan Shaikh
If deep Sx is enabled and prev sleep state was not S0, then if SUS power was lost, it means that the platform had entered deep Sx. Add an elog entry for deep Sx variant in this case. BUG=b:38436041 TEST=Verified that elog entries are updated correctly: Deep S5: 59 | 2017-05-19 10:39:08 | Kernel Event | Clean Shutdown 60 | 2017-05-19 10:39:09 | ACPI Enter | S5 61 | 2017-05-19 10:39:17 | System boot | 22 62 | 2017-05-19 10:39:17 | EC Event | Power Button 63 | 2017-05-19 10:39:17 | ACPI Deep Sx Wake | S5 64 | 2017-05-19 10:39:17 | Wake Source | Power Button | 0 65 | 2017-05-19 10:39:17 | Chrome OS Developer Mode Deep S3: 66 | 2017-05-19 10:40:11 | ACPI Enter | S3 67 | 2017-05-19 10:40:16 | EC Event | Power Button 68 | 2017-05-19 10:40:16 | ACPI Deep Sx Wake | S3 69 | 2017-05-19 10:40:16 | Wake Source | Power Button | 0 Normal S3: 77 | 2017-05-19 10:43:22 | ACPI Enter | S3 78 | 2017-05-19 10:43:39 | EC Event | Power Button 79 | 2017-05-19 10:43:39 | ACPI Wake | S3 80 | 2017-05-19 10:43:39 | Wake Source | Power Button | 0 Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22soc/intel/skylake: Use Intel SATA common codeAamir Bohra
Use SATA common code from soc/intel/common/block/sata and clean up code. Change-Id: Ib5d65f1afda6b2f8098f1c006623a48cf2690593 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/common: Add Intel SATA common code supportAamir Bohra
Add SATA code support in intel/common/block to initilalize SATA controller, allocate resources and configure SATA port status. Change-Id: I42ec0059f7e311a232c38fef6a2e050a3e2c0ad3 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/skylake: Use Intel PCIe common codeAamir Bohra
Change-Id: Ia9fa22c30fffb1907320667ac37f55db9f3cb7b3 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/common: Add Intel PCIe common codeAamir Bohra
Add PCIe code support under soc/intel/common/block to initialize PCIe controller, allocate resources and configure L1 substate latency. Change-Id: I0c374317a3fe0be0bb1c5d9b16fcbc5cad83ca42 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-19drivers/spi/spi_flash: Move flash ops to spi_flash_ops structureFurquan Shaikh
Define a new spi_flash_ops structure, move all spi flash operations to this structure and add a pointer to this structure in struct spi_flash. BUG=b:38330715 Change-Id: I550cc4556fc4b63ebc174a7e2fde42251fe56052 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Clean up SPI flash probeFurquan Shaikh
1. Rename __spi_flash_probe to spi_flash_generic_probe and export it so that drivers can use it outside spi_flash.c. 2. Make southbridge intel spi driver use spi_flash_generic_probe if spi_is_multichip returns 0. 3. Add spi_flash_probe to spi_ctrlr structure to allow platforms to provide specialized probe functions. With this change, the specialized spi flash probe functions are now associated with a particular spi ctrlr structure and no longer disconnected from the spi controller. BUG=b:38330715 Change-Id: I35f3bd8ddc5e71515df3ef0c1c4b1a68ee56bf4b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-19drivers/spi/spi_flash: Pass in spi_slave structure as const to probe functionsFurquan Shaikh
Pointer to spi_slave structure can be passed in as const to spi flash probe functions since the probe functions do not need to modify the slave properties. BUG=b:38330715 Change-Id: I956ee777c62dbb811fd6ce2aeb6ae090e1892acd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19707 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash: Pass in flash structure to fill in probeFurquan Shaikh
Instead of making all SPI drivers allocate space for a spi_flash structure and fill it in, udpate the API to allow callers to pass in a spi_flash structure that can be filled by the flash drivers as required. This also cleans up the interface so that the callers can maintain and free the space for spi_flash structure as required. BUG=b:38330715 Change-Id: If6f1b403731466525c4690777d9b32ce778eb563 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Add page_size to struct spi_flashFurquan Shaikh
Add a new member page_size to spi_flash structure so that the various spi flash drivers can store this info in spi_flash along with the other sizes (sector size and total size) during flash probe. This removes the need to have {driver}_spi_flash structure in every spi flash driver. This is part of patch series to clean up the SPI flash and SPI driver interface. BUG=b:38330715 Change-Id: I0f83e52cb1041432b0b575a8ee3bd173cc038d1f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18rockchip/rk3399: soc: resize reserve memoryXing Zheng
Reserve the whole TZRAM area because it will be marked as secure-only by BL31 and can not be accessed by the non-secure kernel. CQ-DEPEND=CL:452659 BUG=chrome-os-partner:57361 BRANCH=firmware-gru-8785.B TEST=the reserve memory is resized Change-Id: Ie3ab39598f3f7cb96feb0c574e230e7fcb53a1a4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f34d254e1dfc9ae95a784aba22503e75a2fa65f1 Original-Change-Id: I39c4cb530f41a7b0f7f3064125072dd85b62276f Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/418102 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-(cherry picked from commit ea9fe064a9b1e1ce81fca74f829a0fb6e78ce426) Original-Reviewed-on: https://chromium-review.googlesource.com/452640 Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-18uart: Fix bug in {uart8250, uart8250_mem, ns16550}_rx_byte functionsWerner Zeh
We have several different UART implementations of which three support a timeout when receiving characters. In all of these three implementations there is a bug where when the timeout is hit the last received character will be returned instead of the needed 0. The problem is that the timeout variable i is decremented after it has been checked in the while-loop. That leads to the fact that when the while-loop is aborted due to a timeout i will contain 0xffffffff and not 0. Thus in turn will fool the following if-statement leading to wrong return value to the caller in this case. Therefore the caller will see a received character event if there is none. Change-Id: I23ff531a1e729e816764f1a071484c924dcb0f85 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18intel/common/block/i2c: Add common block for I2C and use the same in SoCsRizwan Qureshi
In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18rockchip/rk3399: Add MIPI driverNickey Yang
This patch configures clock for mipi and then adds mipi driver for support innolux-p079zca mipi panel in rk3399 scarlet. Change-Id: I02475eefb187c619c614b1cd20e97074bc8d917f Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-18rockchip/rk3399: remove the delay for enabling SSCCaesar Wang
The hang was caused by deasserting the reset before, it had been delayed 20us fixing the hang issue. So we can remove this delay for now. Change-Id: I5545377b72eb20b59ceaaca25c78965854bfb919 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-17soc/intel/apollolake: Enable decoding for ComA and ComB on LPCMario Scheithauer
If there is an external 8250 UART, one needs to enable the appropriate address ranges before console_init() is called so that the init sequence can reach the external UART. Furthermore FSPM needs different settings for an external UART port. For this, the function fill_console_params() has to be adapted. Change-Id: I62c7d0b54edd18acf793849aef352afbcaeb68b9 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-16soc/intel/common: Add sanity check of PCR_BASE_ADDRESSLijian Zhao
PCR_BASE_ADRESS may be zero if SOC Kconfig didn't define the non zero default value. TEST=Remove the PCR_BASE_ADDRESS config in Apollolake Kconfig file and build. BUG=None Change-Id: I396aa1a3e89507c90e17229a986de5d2c0887c9c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-16soc/intel/skylake: Add option to enable/disable EISTSubrata Banik
Set MSR 0x1A0 bit[16] based on EIST config option. Default Hardware Managed P-state (HWP) also known as Intel Speed Shift is enabled on SKL hence disable EIST and ACPI P-state table. Change-Id: I2b7374a8a04b596edcc88165b64980b7aa09e2a7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-16soc/intel/skylake: Configure C-state interrupt response timeSubrata Banik
Program C3/C7/C10 interrupt response time for all cores. Change-Id: I4f47502e1c212118d7cc89d4de60a1854072964a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-12soc/intel/apollolake: Add macro to define IOSTERM for GPIO configLijian Zhao
Add macro to config GPIO IOSTERM bits. BUG=b:37998248 Change-Id: I178f6d3055d4620cb3c895245c40f324383873ad Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19576 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-12commonlib: Move drivers/storage into commonlib/storageLee Leahy
Move drivers/storage into commonlib/storage to enable access by libpayload and indirectly by payloads. * Remove SD/MMC specific include files from include/device * Remove files from drivers/storage * Add SD/MMC specific include files to commonlib/include * Add files to commonlib/storage * Fix header file references * Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver * Add Kconfig source for commonlib/storage * Rename *DEVICE* to *COMMONLIB* * Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE* TEST=Build and run on Galileo Gen2 Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-12intel/common: drop duplicate initializerPatrick Georgi
Change-Id: I99d0bd7d9b897a10edce35316e095e0223522c54 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Found-by: clang Reviewed-on: https://review.coreboot.org/19656 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-11rockchip/rk3399: enable DPLL SSC for DDR EMI test on bobCaesar Wang
Spread Spectrum Modulator (SSMOD) is a fully-digital circuit used to modulate the frequency of the Silicon Creations’ Fractional PLL in order to reduce EMI. We need to turn the DPLL spread spectrum feature on to reduce the EMI noise for DDR on bob. Change-Id: I75461d4235bcf55324e6664a1220754e770b4786 Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-09soc/intel/skylake: Use common/blocks/uart codeAamir Bohra
Change-Id: I53ed687dc49524e001889f091825b2cc530546a3 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-09soc/intel/apollolake: Use common/block/uart codeAamir Bohra
Change-Id: I92c654d59f1642bcd7c95de80dcc641bf816b542 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-09soc/intel/common: Add PCI configuration code for UARTAamir Bohra
Add PCI configuration code support for intel/common/ block/uart module. Change-Id: Ibce5623ffb879f2427b759106d1f350601837e4b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-09soc/intel/skylake: Use intel/common/block/smbus codeAamir Bohra
Change-Id: I2ca32ab594552424e4f1358302641f159a3d7e62 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-08soc/intel/skylake: Enable MTRR checkFurquan Shaikh
Change a4b11e5c90 (soc/intel/skylake: Perform CPU MP Init before FSP-S Init) dropped mtrr_check while re-organizing code. Add the check back after MTRR setup is performed. BUG=b:36656098 TEST=Verified that MTRR check is done after setup on poppy. Change-Id: I440405c58c470ffa338be386d84870635530a031 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-08soc/intel/skylake: Enable PARALLEL_MP_AP_WORKFurquan Shaikh
With change a4b11e5c90 (soc/intel/skylake: Perform CPU MP Init before FSP-S Init) to perform CPU MP init before FSP-S init, MTRR programming was moved to be performed after CPU init is done. However, in order to allow callbacks after MP init, PARALLEL_MP_AP_WORK needs to be enabled. Since this option was not selected, MTRR programming always failed in ramstage for Skylake / Kaby Lake mainboards. BUG=b:36656098 TEST=Verified 2500+ cycles of suspend resume on poppy. Change-Id: I22a8f6ac90ba35075ff97dd57bab66c129f3e771 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-08soc/intel/quark: Add SD/MMC test supportLee Leahy
The SD/MMC test support consists of: * Add Kconfig value to enable the SD/MMC test support. * Add Kconfig value to enable the logging support. * Add SD/MMC controller init code and read block 0 from each partition. * Add logging code to snapshot the transactions with the SD/MMC device. * Add eMMC driver for ramstage to call test code. * Add romstage code to call test code. * Add bootblock code to call test code. TEST=Build and run on Galileo Gen2 Change-Id: I72785f0dcd466c05c1385cef166731219b583551 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/19211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-08soc/intel/common/block: Add Intel common SMBus codeAamir Bohra
Add below code support under intel/common/block: * SMBus read/write byte APIs * Common SMBus initialization code Change-Id: I936143a334c31937d557c6828e5876d35b133567 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-08soc/intel/apollolake: remove southbridge_clear_smi_status()Aaron Durbin
The southbridge_clear_smi_status() is not used. Remove it. Change-Id: Ia358c6aca93630753ac4b59b6fc86b1ea1eb9ca6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-08soc/intel/skylake: remove unused SMI functionsAaron Durbin
The southbridge_trigger_smi() and southbridge_clear_smi_status() functions are unused. Remove them. Change-Id: I86994191a63cbf515bc330433ef7c3f79a39936e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-06soc/intel/common/block: correct apollolake device idsAaron Durbin
The device ids changed names between patches. Fix them to not break the build any more. Change-Id: I1d74d95ec6b516c4d8354a714b2b302557743fe0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19600 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-05-05soc/intel/common: Provide common block fast_spi_flash_ctrlrFurquan Shaikh
Now that we have a common block driver for fast spi flash controller, provide spi_ctrlr structure that can be used by different platforms for defining the bus-ctrlr mapping. Only cs 0 is considered valid. Change-Id: I7228ae885018d1e23e6e80dd8ce227b0d99d84a6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19575 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-05soc/intel/apollolake: Use XDCI common codeSubrata Banik
This patch performs apollolake specific XDCI controller initialization. Change-Id: I4649bffe1bb90d7df6a72b5334793bf8f0fdbaeb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05soc/intel/common/block: Add Intel XDCI code supportSubrata Banik
XDCI MMIO offsets definitions are not alike between various SoCs hence provided "soc_xdci_init" function to implement SoC specific initialization. Change-Id: I9cbc686a00c26b92be2847b6bd6c2e5aa5a690f7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05soc/intel/apollolake: Use intel/common/xhci driverSubrata Banik
Change-Id: Iccb6b6c8c002701d17444fcf62ec11315e5aeed9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05common/block/xhci: Get XHCI PCI ID from device/pci_ids.hSubrata Banik
Change-Id: I33d92a173055ea18b8675c720f01dd5bc77befa3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05common/block/cse: Use CSE PCH ID from device/pci_ids.hSubrata Banik
Change-Id: Ic92d17b2819c39997bbffff8293c937f3f73776b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05soc/intel/skylake: Enable SATA portsShelley Chen
The current implementation is incorrect and is actually disabling the ports. Fixes that. BUG=b:37486021, b:35775024 BRANCH=None TEST=reboot and ensure that we can boot from SATA SSD. Change-Id: I8525f6f5ddfdf61c564febd86b1ba2e01c22d9e5 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19553 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05fsp_broadwell_de: Switch CPU to high frequency modeWerner Zeh
According to Yang York the FSP is responsible for switching the CPU into high frequency mode (HFM). For an unknown reason this is not done for the BSP on my platform though the APs are switched properly. This code switches the CPU into HFM which makes sure that all cores are in high frequency mode before payload is started. It should not harm the operation even if FSP was successful in switching to HFM. Change-Id: I91baf538511747d1692a8b6b359df5c3a8d56848 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-04soc/intel/skylake: Remove unused skylake_i2c_config structureFurquan Shaikh
Remove struct skylake_i2c_config from chip.h since it is not used anymore. Change-Id: Icde4b7af5b9c31020099c1a6372a6867827f61ae Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-04intel/skylake: nhlt: Add 48Khz 2ch 16bit config for max98927Duncan Laurie
This changelist adds the 48Khz 2ch 16bit NHLT configuration for the Maxim 98927 speaker amplifier codec. BUG=b:35585307 TEST=manual testing to ensure speaker output is functional on Eve board Change-Id: Ieda988b557ecefdace5f81b474a952af56e69315 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19548 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
Board Scarlet doesn't use usbphy1. BUG=b:37685249 TEST=boot Scarlet, check the firmware log, and confirm no errors about USB1 Change-Id: I66e0d8a235cc9057964f7abca32bc692d41e88fd Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/19489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-03lib/edid.c: Differentiate between absent and non-conformant EDIDArthur Heymans
Change-Id: Id90aa210ff72092c4ab638a7bafb82bd11889bdc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-02soc/intel/apollolake: Clean up code by using common FAST_SPI moduleBarnali Sarkar
This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: Ifd72734dadda541fe4c828e4f1716e532ec69c27 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19080 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-02soc/intel/skylake: Clean up code by using common FAST_SPI moduleBarnali Sarkar
This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: I4fc90504d322db70ed4ea644b1593cc0605b5fe8 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19055 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-02soc/intel/skylake: Set xtal bypass on low power idleNaresh G Solanki
When using Wake On Voice &/or DCI, it requires xtal to be active during low power idle. With xtal being active in S0ix state power impact is 1-2 mW. Hence set xtal bypass bit in CIR31C for low power idle entry. TEST= Build with s0ix enable for Poppy. Boot to OS & verify that bit 22 of CIR31C register is set. s0ix works. Change-Id: Ide2d01536f652cd1b0ac32eede89ec410c5101cf Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19442 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01soc/intel/common/block: Add Intel common FAST_SPI codeBarnali Sarkar
Create Intel Common FAST_SPI Controller code. This code contains the code for SPI initialization which has the following programming - * Get BIOS Rom Region Size * Enable SPIBAR * Disable the BIOS write protect so write commands are allowed * Enable SPI Prefetching and Caching. * SPI Controller register offsets in the common header fast_spi.h * Implement FAST_SPI read, write, erase APIs. Change-Id: I046e3b30c8efb172851dd17f49565c9ec4cb38cb Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18557 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01soc/intel/skylake: Add ID for Fizz i7Shelley Chen
Bug=b:35775024 BRANCH=None TEST=boot up successfully to kernel on Fizz i7 sku Change-Id: Iccf9fbef1333f3fea78091b679c2676411559987 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19486 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-28soc/intel/skylake: Use ITSS common codeBora Guvendik
This patch uses common ITSS library to setup itss irq. Change-Id: Ibe65a92f1604277bec229c67f4375b6636c0972d Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19244 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28soc/intel/apollolake: Use ITSS common codeBora Guvendik
This patch uses common ITSS library to setup itss irq. Change-Id: Id265505cfc106668aea25ad93e114fe20736b700 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19236 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28soc/intel/common/block: Add Intel common ITSS code supportBarnali Sarkar
Create Intel Common ITSS code. This code currently only contains the code for Interrupt initialization required in Bootblock phase. More code will get added up in the subsequent phases. Change-Id: I133294188eb5d1312caeafcb621fb650a7fab371 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19125 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28soc/intel/apollolake: fix system reset eventlogAaron Durbin
The SRS bit which is supposed to indicate reset button press is non-functional. If it did work the system reset event it was associated with is overly specific. Therefore, use the warm reset status bit. BUG=b:37687843 Change-Id: I34dd09c03d2bca72da9a5cdf23121e0d0e621fa6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19484 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-28soc/intel/apollolake: work around full retrain constraints on warm resetAaron Durbin
It's come to attention that apollolake doesn't support a full retrain on warm reset. Therefore force a cold reset when a full retrain is requested in the non-S5 path. BUG=b:37687843 Change-Id: If9a3de1fa8760e7bb2f06eef93a0deb9dbd3f047 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19483 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-28soc/intel/apollolake: Update default LPDDR4 CA ODT configRavi Sarawadi
Update default ODT config to have correct CA ODT settings as the current defaults are incorrect for all the current apollolake designs. All the current designs pull both A and B channels' LPDDR4 modules' ODT pins to 1.1V. Therefore, the correct impedance setting needs to be applied. In order for the settings to take effect one needs to clear the memory training cache in deployed systems. Trigger this by bumping the memory setting version for the SoC. If needed in the future support for allowing the override of this setting from the mainboard should be straight forward. It's just not necessary at this time. BUG=b:37687843 TEST=BAT test, warm, reboot, S3 cycle test Change-Id: I9a2f7636b46492a9d08472a0752cdf1f86a72e15 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19397 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-28rockchip: gpio: add gpio_input_irq & gpio_irq_statusJeffy Chen
BUG=b:35647967 TEST=boot from bob Change-Id: I5de902ab26fe768b641f69d85a5294baf6d916e3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 223257d486b026c06a1f3a7a830b829efb9932dc Original-Change-Id: I055ad5f59285cee3110d1e7cb1a53a60144712e4 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/452285 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19433 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-28fsp_broadwell_de: Add SMM codeWerner Zeh
Add basic SMM support for Broadwell-DE SoC. The code is mainly based on the SMM implementation of Broadwell with a few differences: - EMRR is now called PRMRR and the UNCORE part of it is not available - SMM_FEATURE_CONTROL is no longer a MSR but is now located in PCI space - currently only SERIRQ-SMI has a handler Change-Id: I461a14d411aedefdb0cb54ae43b91103a80a4f6a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19145 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28intel/skylake: Switch FADT to ACPI version 3.0Werner Zeh
On Apollo Lake it was discovered that our current FADT implementation is valid for ACPI version 3.0 but misses fields for ACPI version 5.0. We run into booting issues with Windows 10 using version 5 in the FADT header. In commit 2b8552f49bc3a7d0290f96a84b573669de396011 (intel/apollolake: Switch FADT to ACPI version 3.0) we go back to version 3 for Apollo Lake. Skylake is now the last platform that uses version 5 in FADT header. Change-Id: I2d0367fae5321dee4ccac417b7f99466f8973577 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19453 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 04:13:10 +0000