aboutsummaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2019-07-04arch/x86: Adjust size of postcar stackKyösti Mälkki
With VBOOT=y && VBOOT_MEASURED_BOOT=y message digest will be allocated from the stack and 1 KiB reserve used with the recent platforms was no longer sufficient. The comment of LZMA scratchpad consuming stack was obsolete for postcar, so these can be reduced to same 4 KiB. Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-04Revert "soc/intel/skylake/romstage: Increase size of postcar stack"Kyösti Mälkki
This reverts commit f70cb8bf968af75669325104756464ce6f4b824b. It was merged prematurely with some vague argumentation in the commit message and not all issues of reviewers were addressed. Change-Id: Ia336f3499fb29976a6b80383ef8b0f3d552f5640 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03soc/amd/common/lpc: Add Picasso IDMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I02e6fdcd6685e0dd3fa7872b054ebe508157a0ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/33758 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03soc/amd/common/iommu: Add Picasso IDMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ib000e12cd568dd83b9533efe66e67878b806b3f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/common/hda: Add Picasso IDsMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I02b279a2b625ecbdf827cb4643d772eb81ddfe70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Remove all PSP runtime functionsMarshall Dawson
Remove the mailbox call to notify the PSP that DRAM is ready. This is not supported on Family 17h. Remove the selectable SMU firmware. This is a feature of the PSP bootloader and the standard bootloader doesn't contain the ability. Clean up additional mentions of PSP within picasso. Change-Id: I8abeb4c375dbff3b438cd18ccaaf66e11c86e72e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Remove fanless SKU optionMarshall Dawson
The command line options for picasso will look different than stoneyridge. Remove the fanned/fanless distinction to simplify the makefile. Picasso will use subprograms instead of fanned/fanless SKUs. Change-Id: I50d8751e14b00ca53a6498f8e6c7f3f42543dace Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33753 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03soc/amd/picasso: Remove SD controllerMarshall Dawson
Change-Id: Ie9cf361ed0caba9c73727453c4a503557edc854d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-03soc/amd/picasso: Add xhci1 and remove ehciMarshall Dawson
Change-Id: I9d0098082c224bbf5ab2b4f0f41eb8b5b729eec7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-03soc/amd/picasso: Remove most stoneyridge USBMarshall Dawson
Picasso doesn't implement the AcpiMmio XHCI_PM registers. Remove source that uses these. Remove USB devices from the AOAC registers. Remove the D0/D3 support from ASL, including all supporting xHCI firmware loading support. Remove xHCI firmware from amdfw.rom. Change-Id: Iae4c72c5a8e353ca8db02d04735f8d2b28441793 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Remove stoneyridge GECMarshall Dawson
Remove the hudson-style support for the Gigabit Ethernet Controller. Change-Id: I2124b949a866148a97d9cd6e7fd418f7de8e2216 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Change all remaining soc namesMarshall Dawson
Convert all remaining stoneyridge names to picasso. Change-Id: I0ed3eaa5b1d2696448ae18b62c7218de59c61883 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/intel/skylake: Add Kabylake-R microcode update filesArthur Heymans
This also corrects some CPU naming in comments. Change-Id: I8b9fc3ba0d6dc6e0001b40518aae2d26c1184dc8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34000 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03vboot: Use CONFIG_VBOOT_MIGRATE_WORKING_DATA on all platformsJulius Werner
When we added CONFIG_VBOOT_MIGRATE_WORKING_DATA, the idea was that on some Arm platforms the original working data buffer was in SRAM, which stays accessbile for the whole runtime of the system. There is no reason to migrate it into CBMEM on those platforms because ramstage and the payload could continue to access it in SRAM. Now that we've had a couple of months of experience with this option, we found that most of our Arm platforms have some issue that requires migrating anyway, because BL31 often claims SRAM for itself and makes it inaccessible to the payload. On the remaining platforms, accessing SRAM from the payload is possible but still an issue, because libpayload doesn't have enough memory layout information to set up proper page tables for it, so we're accessing it uncached and at risk of alignment errors. Rather than having to figure out how to map the right SRAM range for every platform in the payload, let's just get rid of the option. memcpy()ing 12KB isn't worth this much hassle. Change-Id: I1b94e01c998f723c8950be4d12cc8f02b363a1bf Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-07-02sdm845: Update macro definition in CB clock driverAkash Asthana
Use literals KHz & MHz for kilohertz and megahertz frequency usages in macro definition. Change-Id: If1ca6e5e7b0603f93f3c980cc85af470fdcd54ba Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-02src: Use CRx_TYPE type for CRxElyes HAOUAS
Change-Id: If50d9218119d5446d0ce98b8a9297b23bae65c72 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33816 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/intel/cannonlake: Add support to log XHCI wake eventsPaul Fagerburg
Enhance elog wake source information with more details about which USB port resulted in a wake from S3 or S0ix. BUG=b:123429132 BRANCH=none TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage`` Ensure /build/hatch/firmware/image-hatch.serial.bin has been built. Plug a keyboard into a USB port on the DUT. Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via servo). On the console, run ``powerd_dbus_suspend``. Wait for the DUT to enter low power mode. Verify low power mode by issuing the ``powerinfo`` command on the EC console (via servo). Expect to see ``power state 4 = S0ix``. Press a key on the USB keyboard. The DUT wakes up. On the console, run ``mosys eventlog list`` and look for the wake source. 156 | 2019-06-26 09:46:07 | S0ix Enter 157 | 2019-06-26 12:14:05 | S0ix Exit 158 | 2019-06-26 12:14:05 | Wake Source | Internal PME | 0 159 | 2019-06-26 12:14:05 | Wake Source | GPE # | 109 Program image-hatch.serial.bin into the DUT using flashrom. Repeat the ``powerd_dbus_suspend``, ``powerinfo``, ``mosys eventlog list`` sequence. 12 | 2019-06-26 14:52:23 | S0ix Enter 13 | 2019-06-26 14:53:07 | S0ix Exit 14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3 15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109 Change-Id: Ie9ef870e219733dea9806c766f5351db25689b32 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-02soc/amd: Add picasso to KconfigMarshall Dawson
Change-Id: I7031b07ae105a14be3c5d4e52ecc1364956fd845 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33750 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/amd/picasso: Stub out bootblockMartin Roth
Remove all Picasso bootblock support. CAR is not a supportable feature, and the first code executed at the reset vector will be a hybrid romstage. Details for this implementation may be found in Documentation/soc/amd/picasso/family17h.md. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I8edf45c02dc5bfcdca03abf1294db4be508682cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/32413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-02soc/amd/picasso: Update stoney paths to picassoMartin Roth
Update paths. There are still a few paths in Kconfig relating to PSP and the firmware directory table. Those will be updated in a follow-on commit. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I18f3d80dbeabd754ebcee6593864fd613fc2ef7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/32412 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/amd/picasso: Rename makefile.inc back to Makefile.incMartin Roth
Now that the Makefile is updated, we can change the name back without it affecting the Stoney build. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I18ee48865fb64265f38179560265827783d50820 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-02soc/amd/picasso: Change SOC_AMD_STONEY* to SOC_AMD_PICASSOMartin Roth
TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ie466bc39ed6aa9d2a8651bd9290090b83cd97d74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32410 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/amd/picasso: Change header guards from stoney to picassoMartin Roth
TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I32b7dbeae7538884311ccfc3a0e8db63c48fe356 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-02soc/amd/picasso: Remove ST files not used for PCOMartin Roth
Remove files that aren't needed for the picasso port. Remove traces of AGESA v5 (includes binaryPI support files). Remove SPD helper. Picasso (and all AMD Family 17h processors) have a very different boot flow from previous products. Memory is initialized by the PSP before the x86 processor is released from reset. The SPD is read by the PSP, so it's not needed in coreboot. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I743ffd6058982f8f182ea4d73172a029967f3ea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-07-02soc/amd/picasso: Create picasso as a copy of stoneyridgeMartin Roth
So that everyone can see what's being updated from stoney, we're starting with a direct copy of the stoney directory. There are arguments both for and against doing it this way, but I believe This the most transparent way. We've moved much of the duplicated stoney code into the soc/amd/common directory and will continue that work as it becomes obvious that we have unchanged code between the SOCs. Makefile.inc has been renamed as makefile.inc so that it won't build in jenkins until the directory is updated. Other than that change, this is an exact copy of the stoneyridge SOC directory which will be updated in the follow-on commits in the patch train. TEST=None BUG=b:130804851 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I6809bd1eea304f76dd9000c079b3ed09f94dbd3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/32407 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/intel/icelake: Disable HDA based on devicetreeSubrata Banik
Change-Id: I28c2beca4bc26ddb896e68886571ebdc82276b48 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-02QC common: fix compiler complaint, missing <string.h>T Michael Turney
Change-Id: I5b5b7bc61dd82fb1b866857d60926b057fae3715 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33445 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-01Use 3rdparty/intel-microcodeArthur Heymans
Instead of maintaining this in 3rdparty/blobs use the 3rdparty/intel-microcode which is maintained by Intel. This allows for some finegrained control where family+model span multiple targets. Microcode updates present in 3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those contain updates not present in the Intel repo. Those are presumably early CPU samples that did not end up in products. The following MCU are get a new revision: old: sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552 sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528 sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288 sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312 sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728 sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384 sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336 sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280 sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304 sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432 sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328 new: sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-28{soc,northbridge}/Kconfig: Remove unused CACHE_MRC_SIZE_KBElyes HAOUAS
Change-Id: Ie922832bc7641a44a53c0cda8d808579c66420b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-28soc/intel/cannonlake: fix use of legacy 8254 timerMatt DeVillier
FSP sets the use of the 8254 timer via the Enable8254ClockGating UPD, which defaults to enabled, overriding what is set by coreboot. Per the FSP integration guide, this UPD needs to be disabled when a legacy OS is booted (ie, when SeaBIOS is used as the payload). Add a Kconfig option to set the UPD properly based on payload selection, and remove the existing coreboot code in lpc.c since it is either ineffective or being overridden by FSP. Test: build/boot out-of-tree WHL board with both SeaBIOS and Tianocore, ensure 8254 timer usage set correctly for each. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I0e888bf754cb72093f14fc02f39bddcd6d288203 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-28qualcomm: qclib: Ensure interface table entry name is terminatedJulius Werner
This string is printed in dump_te_table() so we should make sure it's properly null-terminated. This fixes Coverity issue 1401305. Change-Id: I45827f552c2d8a4e01b50a699ac88ee457043282 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-26soc/intel/cannonlake/Kconfig: Don't have all variants select ↵Arthur Heymans
SOC_INTEL_CANNONLAKE This allows to use Kconfig options to differentiate between SOC variants. Change-Id: Ica11c68377e3d0dc8a8f48198e01a74d7bebe642 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33559 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-25soc/intel/dnv: Fix value of B_PCH_GPIO_RX_SCI_ROUTEPatrick Havelange
The value for that macro should be 1<<19. This is confirmed by the Intel doc and also by N_PCH_GPIO_RX_SCI_ROUTE. See Intel Atom® Processor C3000 Product Family Datasheet (February 2018) : https://www.intel.com/content/www/us/en/products/docs/processors/atom/c-series/c3000-family-datasheet.html Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Change-Id: I808d9131032a9796d837e00ad6fb3369b792e597 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33573 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-24cbfstool: Drop update-fit optionPatrick Rudolph
The ifittool is used instead. Drop old code. Change-Id: I70fec5fef9ffd1ba3049badb398783f31aefb02f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-06-24Replace ENV_RAMSTAGE with ENV_PAYLOAD_LOADERSubrata Banik
This patch relying on new rule, ENV_PAYLOAD_LOADER which is set to ENV_RAMSTAGE. This approach will help to add future optimization (rampayload) in coreboot flow if required. Change-Id: Ib54ece7b9e5f281f8a092dc6f38c07406edfa5fa Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-06-21mediatek/mt8183: support SAMSUNG and MICRON EMCP LPDDR4X DDR bootupHuayang Duan
Support SAMSUNG KMDP6001DA-B425 and MICRON MT29VZZZAD8DQKSL EMCP LPDDR4X DDR From the calibration log of MICRON MT29VZZZAD8DQKSL, we found the begin pass range of RX window earlier than with other DDR type. So need change the DQS starting offset to increase the scan range of RX window. BUG=b:80501386 BRANCH=none TEST=Boots correctly on EMCP DRAM Change-Id: I5fcc8673a2fbd7ec3a8776ab61c57f8903ddda20 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
2019-06-21mediatek/mt8183: fix mode register setting fail issueHuayang Duan
The mode register setting of DRAM may fail without some delay after each MR write. BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: I51785e90b2014994be5018bfe543245d44626242 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32284 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mediatek/mt8183: enable DDR low power featuremtk11195
BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: Ic48580e7e5db25dc1c29dabf41c4e3816fb946d3 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
2019-06-21soc/intel: Provide SPD manufacturer ID and module type to SMBIOSDuncan Laurie
The DIMM manufacturing ID was not being initialized and so the DIMMs were not described in SMBIOS tables properly. The module type can also be provided, but the SMBIOS code expects SPD module type values from DDR2 so the DDR3/4 values are adjusted before sending to SMBIOS. BUG=b:134897498 BRANCH=sarien TEST=dump and compare with dmidecode BEFORE: Type: DDR4 Manufacturer: Unknown (0) Form Factor: Unknown AFTER: Type: DDR4 Manufacturer: Hynix/Hyundai Form Factor: SODIMM Change-Id: Id673e08aa6e3dad196009c3c21a3dda2f40c9e42 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-21soc/intel/cannonlake: Rename SOC_INTEL_COMMON_CANNONLAKE_BASEArthur Heymans
What it really means to do is to use different FSP headers. Change-Id: I3c75d4aac8525ab2639608fb9c1b3a9afef0e943 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21cpu/x86/msr: Move IA32_MISC_ENABLE bits to common placeElyes HAOUAS
Change-Id: I51aa300358013cb0e76704feb2115d2a7e260f8a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31193 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21soc/intel/skylake: Clean up KconfigArthur Heymans
This does the following: - select MAINBOARD_USES_FSP2_0 on Kabylake (does not support FSP1.1) - Remove stale Kconfig option on intel/saddlebrook - select SOC_INTEL_KABYLAKE on intel/kblrvp Change-Id: I64f48eeb00150aea039d533b0ac471fdd8483b90 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21soc/intel/skylake: Remove ROMCCFLAGSArthur Heymans
This is never used. Change-Id: I414acc38f72e206eb48cfd98214985c320862c91 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-21soc/intel/skylake/romstage: Increase size of postcar stackChristian Walter
I increase the size oof the postcar stack to prevent a stack overflow during the measured boot feature. After common string functions have been moved from inline into .c file (https://review.coreboot.org/c/coreboot/+/32901), I experienced a stack overflow in the postcar stage while verifiying the romstage during measured boot. To prevent this, the stack size should be increased. To play it safe, it should be increased to 8 KiB - though this is open for discussion. Change-Id: I6f1a4631bcadfb8c7d1de5bf0919e40990a65606 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-21mediatek/mt8183: set vproc12 voltage correctlyHsin-Hsiung Wang
The correct address for vproc12 register of sw mode is 0x1426 instead of 0x140a. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui and see that regulator is not stuck to 1.05V anymore: grep vproc12 /sys/kernel/debug/regulator/regulator_summary Change-Id: I13867b11c44019875e0ed607343197950a3b38b2 Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33168 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mediatek/mt8183: Add infra group DCM settingWeiyi Lu
Add infra group DCM (Dynamic Clock Management) settings, which slows down OR gate clocks while hardware is in idle state. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Change-Id: I4741dfb7b984deb92171f370e5fb2593829d74c2 Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com>
2019-06-21mediatek: Add SPI tick_dly settingMengqi Zhang
Add spi tick_dly setting for high-speed spi xfer. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: Ie49fc3efe2a4a6dcdf2a2fc4c91b47e35d4f086e Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mediatek/mt8183: Add SPI GPIO driving settingMengqi Zhang
Set SPI GPIO driving to support SPI FLASH. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: I95002ec71abd751c33c089185db04ed4a8686699 Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32460 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mediatek/mt8183: Support RTC in ramstageYou-Cheng Syu
We need to support RTC in ramstage so that we can see correct timestamp in ChromiumOS eventlog. BUG=b:134461866 TEST='mosys eventlog list' shows correct timestamp on Kukui Change-Id: Idb0fe5c05e4ecdf0e6398e3c781c71d14f85f19b Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mediatek/mt8183: Add efuse calibration in auxadcjg_poxu
The values from auxadc may be incorrect if not calibrated by efuse. Without calibration, the value error range is about +/-50mv, and after being calibrated the error range is about +/-10mv. BUG=b:131391176 TEST=make clean && make test-abuild; boots on Kukui rev 2 units. BRANCH=none Change-Id: Iccd6ea0ad810c993f9b62c0974279c960f890e52 Signed-off-by: Po Xu <jg_poxu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32800 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: JG Poxu <jg_poxu@mediatek.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21soc/intel/common/block/pcr: Remove unneded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: Ib3371ef6edb85a47ed734dd2ff9ce94008aa4e65 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33336 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mediatek/mt8183: Calibrate vsim2 to 2.7 VHsin-Hsiung Wang
The default voltage of vsim2 is set to 2.76V for sim card usage. In general, 2.76V of vsim2 is composed of 2.7V main voltage and 0.06V calibration voltage. However, vsim2 is used for the tx_ovdd power of display port IT6505 on the kukui board design which needs 2.7V. So we set it to 2.7V with modifying calibration value. BUG=b:126139364 BRANCH=none TEST=measure vsim2 voltage with multimeter Change-Id: I4dffdde89cbde91286d92e6c2b445f0b3d0ad2fe Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-20soc/intel/braswell/smbus.c: Add support for i2c mode block writeFrans Hendriks
Intel Braswell supports i2c block write using SMBus controller. smbus_i2c_block_write() is added to configure SMBus controller in i2c mode before calling do_i2c_block_write(). Add smbus.c to ramstage. BUG=N/A TEST=Verify LCD display is working on Facebook FBG-1701 Change-Id: I50c1a03f624b3ab3b987d4f3b1d15dac4374e48a Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-18soc/intel/skylake: Select microcode updates depending on discrete PCHArthur Heymans
Change-Id: I05e97484605306afc70c726187bda8091216c9cc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-16soc/intel/common: Fix booting issue without default IGD enabledSubrata Banik
This patch ensures to boot platform without onboard GFX (PCI B0:D2:F0) enabled from mainboard devicetree.cb. TEST=Previously platform was dying at "GMADR is not programmed!" with IGD disabled. Change-Id: I8c907ee25db4538a84890f2ccc3187afa86604b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33449 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13soc/intel/{cml, whl}: Add option to skip HECI disable in SMMSubrata Banik
This patch provides an additional option to skip HECI function disabling using SMM mode for WHL and CML platform, where FSP has dedicated UPD to make HECI function disable. User to select HECI_DISABLE_USING_SMM if FSP doesn't provided dedicated UPD. Right now CNL and ICL platform will use HECI_DISABLE_USING_SMM kconfig to make HECI disable and WHL/CML has to rely on FSP to make HECI disable. Change-Id: If3b064f3c32877235916f966a01beb525156d188 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-13soc/intel/icelake: Replace PCI device LPC to ESPI as per EDSSubrata Banik
As per Icelake EDS PCI device B:D:F (0:0x1f:0) referred as ESPI, hence modify SoC code to reflect the same. This patch replaces all SoC specific PCI LPC references with ESPI except anything that touches intel common code block. Change-Id: I4990ea6d9b7b4c0eac2b3eea559f5469f086e827 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
2019-06-12vendorcode/intel/fsp/fsp2_0/cometlake: Update FSP-M/S header files as per v1155Aamir Bohra
This CL implements below changes: 1) Update FSP-M and FSP-S header files as per FSP release version 1155. 2) Update the PcdSerialIoUartNumber reference in fsp_params.c with SerialIoUartDebugControllerNumber. Change-Id: I6d412424f9f5c5d2d56b789c2fef4bdb817a3019 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32844 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-12qcom: Add i2c driverPrudhvi Yarlagadda
Add i2c driver in coreboot. Change-Id: I3d39d0325718fc5dd60da42eb2b87dcc4429bfc2 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-12{drivers,soc/intel/braswell}: Implement C_ENVIRONMENT_BOOTBLOCK supportFrans Hendriks
No C_ENVIRONMENT_BOOTBLOCK support for Braswell is available. Enable support and add required files for the Braswell Bootblock in C. The next changes are made support C_ENVIRONMENT_BOOTBLOCK: - Add car_stage_entry() function bootblock-c_entry() functions. - Specify config DCACHE_BSP_STACK_SIZE and C_ENV_BOOTBLOCK_SIZE. - Add bootblock_c_entry(). - Move init from car_soc_XXX_console_init() to bootblock_soc_XXX_Init() Removed the unused cache_as_ram_main() and weak car_XXX_XXX_console_init() BUG=NA TEST=Booting Embedded Linux on Facebook FBG-1701 Building Google Banos Change-Id: Iab48ad72f1514c93f20d70db5ef4fd8fa2383e8c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-11soc/amd/common: Add errors for invalid AcpiMmio accessMarshall Dawson
Add a method for the soc/amd/<product> to indicate what AcpiMmio ranges are supported. Induce a build error if soc or mainboard code is added which attempts to use an unsupported block. This patch attempts to dissuade accessing unsupported blocks without requiring the complexity of structures or reinitializing at the beginning of a new stage. TEST=boot grunt, force build errors by removing blocks in iomap.h BUG=b:131682806 Change-Id: I2121df108fd3caf07e5588bc3201bcdd8dcaaa00 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-06-10sdm845: qspi: Add Dual SPI supportJulius Werner
This patch adds support for the Dual SPI feature (SDR 2-bit in Qualcomm terminology) to the QSPI controller. Change-Id: I7aed2ccd9627f5de5dd760b418f74d56d2c031d3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33284 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09soc/intel/icelake: Pass FSP-M/S UPD as per ICL requirementAamir Bohra
1. Gfx stolen memory requirement for ICL GFX 2. Enable PeiGraphicsPeim support Change-Id: I22dd14249b7402873f1ac07bee164ee7bee36414 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31955 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09soc/intel/common: Skip SoC GT programming based on CONFIG_SKIP_GRAPHICS_ENABLINGSubrata Banik
Skip GT specific programming in coreboot to support early parts without GT enable. Change-Id: I231e13367cbfbafbfb0cb4235487dbcbcae76820 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33189 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08src/soc/intel/skylake/acpi: Remove Return for PS0/3Christian Walter
Remove the Return statement within the PS0, PS3 methods. PS0/3 are not allowed to return anything. Even an empty return will be resolved to Return(Null). In order to be conform with the specification, the code has been refactored to remove the return statements. Change-Id: I7b4820e8dd40a9169a7facce67282b8af5af67af Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33293 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08src/soc/intel/skylake/bootblock: Add SPT C236 to PCH TableChristian Walter
Add Skylake C236 to the PCH Table. The one which was already in there is actually the CM236 and not the C236. This can be checked in datasheet: 100-series-chipset-datasheet-vol-1 p. 25. Change-Id: I435927f15e9d3219886375426b09c68632dfe3d9 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-07soc/intel/cannonlake: Add _DSM method for SD controllerV Sowmya
The SD controller seems to take some time after restarting the clock at 1.8V before it actually switches from 3.3V to 1.8V. Add a _DSM method that simply sleeps when switching between 3.3V and 1.8V. Otherwise, the kernel times out too quickly waiting for the card to acknowledge the 1.8V switch. The card itself is waiting until it sees the clk signal being driven at 1.8V. BUG=b:125441242 TEST=Boot Hatch with SD card and CR2 removed, observe voltage switch succeeds. Change-Id: I15090ed9f9bc90b35dfcba47c913e3d37b799d0b Signed-off-by: V Sowmya <v.sowmya@intel.com> Signef-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-07soc/intel: Add some missing MCH PCIe IDsKeno Fischer
These are documented in the Intel Datasheet entitled "6th Generation Intel® Processor Datasheet for S-Platforms" "6th Generation Intel® Processor Datasheet for H-Platforms" (Volume 2) Without them, coreboot fails to properly inform the payload of the amount of available memory. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Change-Id: I5b810c6415c4aa0404e5fa318d2c8db292566b8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/33286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-06soc/intel/skl/graphics: Implement panel setupNico Huber
Logs from Linux' i915 suggest that not even the FSP/GOP takes proper care of this. The sequence is mostly the same as on older platforms, with a slightly different configuration of the backlight PWM. We light the panel up with 50% PWM duty cycle. This often results in an already rather high perceived brightness, but shouldn't be too blinding. Change-Id: I762a77c8df023a4c14af502af5edfeeb961da1ae Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-06soc/amd/common: Make biosram functions more readableMarshall Dawson
Modify the 16 and 32 bit BIOS RAM access functions that had been originally moved from stoneyridge. This was suggested in the review of 69486cac7: Create AcpiMmio functionality from stoneyridge Change-Id: I5b491da6f263cbab2b549301e16a7e19896f2428 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32932 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Update AcpiMmio commentsMarshall Dawson
Document the AcpiMmio individual blocks better. This is in response to a request in gerrit for 69486cac7: Create AcpiMmio functionality from stoneyridge Correct comments that were inadvertently left in place from older patches. Change-Id: I4c16a866de5622e8cfbd3a08816b9d3182950d0e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32931 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06qcs405: Enable VBOOT_MIGRATE_WORKING_DATANitheesh Sekar
Enable VBOOT MIGRATE_WORKING_DATA so that the data required by depthcharge is copied into the coreboot tables and made available to depthcharge after BOOT_IMEM is cleansed. Change-Id: I0317b73d24b07553672695998589f86677e0be64 Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-06-06soc/amd/common: Fix consistency in AcpiMmio argumentsMarshall Dawson
Change all arguments named "offset" to "reg" to match the others. These should have gone into change 69486cac7: Create AcpiMmio functionality from stoneyridge Change-Id: Ifdd00d0a5d1e03bfa68a13eeece2d2cfd56aa39d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32930 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Clean up prototypes for AcpiMmioMarshall Dawson
Reorder the biosram prototypes to match the rest of the file. Remove prototypes for asf 32-bit functions that have not been implemented. Change-Id: Ic2663158d8a71952c26eb37f34342a6ea5e58a42 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32929 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06src/amd/stoneyridge: Move alink source to commonMarshall Dawson
Relocate the alink access functions out of stoneyridge where they were dead code. This source maintains the ability to access all register spaces, however more modern APUs define only ABCFG in the BKDGs. BUG=b:131682806 Change-Id: I5c558ccc64bd04a66399c678d43beb0a97e72f63 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32663 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Add ALink-AHB Bridge to iomap.hMarshall Dawson
Add the address and replace the hardcoded value in the ASL code. Change-Id: If0b99de78d8c5948e2e5f2aa50dfc2efc1bd1ba1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32662 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move sata to commonMarshall Dawson
Relocate generic sata support from stoneyridge to common/block. BUG=b:131682806 Change-Id: I4e9eddaa291e5e03f4f8d88826973c5b8ee9a1c5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32661 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Split sata functionalityMarshall Dawson
Separate chipset-specific source from sata_init(), and modify it to better match coreboot conventions. A subsequent patch will move the generic portion to soc/amd/common. The support for enabling port multipliers appears to have been first added for Kabini. Although missing from the documentation, the ability to affect the HBA Capabilities Register seems to remain for Stoney Ridge. Change-Id: I5dd9f613d36badc3e4d185a22b4475cb82ce187e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32660 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Remove sb_util.cMarshall Dawson
Obsolete pm_acpi_pm_cnt_blk(), and remove it and pm_acpi_pm_evt_blk(). Relocate the remaining functions to get/save UMA information to southbridge.c. Change-Id: I90c4394e3cf26f4ad60a078948a84303bda693d0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32659 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Relocate acpi_get_sleep_type()Marshall Dawson
Move the function into common code. Convert it to use the memory- mapped access type. Convert vboot_platform_is_resuming() to call it instead of duplicating the source. BUG=b:131682806 Change-Id: I245bebb8dc2d331cdd56acfb245a004536b792ab Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32658 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move IOMMU support to commonMarshall Dawson
BUG=b:131682806 Change-Id: Icb02180645c9e7e6dc973438c777228b031b3f54 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32657 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move hda.c to commonMarshall Dawson
BUG=b:131682806 Change-Id: I1aa869584fd6743101c07a6a508abff6426df18d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32656 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Relocate MMIO access of ACPI registersMarshall Dawson
The AcpiMmio block allowing direct access to the ACPI registers has remained consistent across AMD models. Move the support from soc//stoneyridge to soc//common. BUG=b:131682806 Change-Id: I0e017a71f8efb4b614986cb327de398644599853 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32655 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Rework block/acpiMarshall Dawson
The halt.c file relies on the ACPI register block in the AcpiMmio range. This register block is consistent across AMD device generations, so to prepare for moving additional stoneyridge support to this directory by changing the file name and add a Kconfig symbol to control the build. BUG=b:131682806 Change-Id: I2f7442dd78bced7f69b0416a8cd751291f82151f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32654 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move LPC support to commonMarshall Dawson
AMD devices traditionally have the LPC-ISA bus at 14.3 and the definition has been very consistent. Relocate the feature from stoneyridge into common/block. BUG=b:131682806 Change-Id: I8d7175b8642bb17533bb2287b3e3ee3d52e85a75 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32653 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Rework SPI base address get/setMarshall Dawson
A subsequent patch will move the soc//stoneyridge LPC functionality to a common directory. Prepare by reworking the SPI BAR configuration function in southbridge.h. The SPI BAR is not a typical PCI BAR, and is at D14F3xA0. Change-Id: I73ddb4afaf9e67ca0522ecb6085b23c92fedc461 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32652 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move GPIO support to commonMarshall Dawson
The banked GPIO functionality in the AcpiMmio block has been consistent since the Mullins product. Move the basic support into a common directory. Each product's pin availability, MUXes, and other details must remain specific to the product. The relocated source also drops the weak configure_gevent_smi() that reports SMI is not available. The stoneyridge port relies on SMI to do its initialization, similar to modern soc/intel devices. This is the plan for future soc/amd ports, so make a missing function a build error instead of a runtime warning. BUG=b:131682806 Change-Id: I9cda00210a74de2bd1308ad43e2b867d24a67845 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-06src/soc/intel/common/smbios: Add addtional infos to dimm_infoChristian Walter
Add ECC Support and VDD Voltage to dimm_info struct. Now Bus Width and ECCSupport will be propagated correctly in SMBIOS Type 17 Entry. Change-Id: Ic6f0d4b223f1490ec7aa71a6105603635b514021 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33031 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-05coreboot: Add i2c clock API for qcs405Taniya Das
Add support of i2c clock enable, disable and configure API. Change-Id: Ia0b42357ac09bf0ab60aad18c44e5ef27fe9dac3 Signed-off-by: Shefali Jain <shefjain@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32545 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04qcs405: Add SPI driver supportPrudhvi Yarlagadda
Add SPI driver support in coreboot. Change-Id: I813ba0b5cc8344c463c3e41ff6db80bc0d8ebd96 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32058 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04qcs405: Add UART supportPrudhvi Yarlagadda
Add support for UART driver in coreboot. TEST=build & run Change-Id: Id9626c68eadead8b8ec5ffbc08cab7b0ec36478f Signed-off-by: Prudhvi Yarlagadda<pyarlaga@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29964 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04soc/intel/braswell: Use common cpu/intel/car codeArthur Heymans
The code in cpu/intel/car/romstage.c Does most of the things like setting up timestamps, stack guards, entering postcar. A functional difference is that the FSP header is searched for twice instead of passed from the CAR entry to the C code. When using C_ENVIRONMENT_BOOTBLOCK this needs to be done anyway (or a special linker symbol kept across multiple stages is needed, which is likely not worth the speedup). Change-Id: I0f03e5a808f00157fdd807b104417a54e4bde7b2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-04device_tree: Make FDT property data non-constJulius Werner
FDT property data should not be const -- sometimes we need to update it, for example when fixing up phandles in an overlay. On the other hand it's occasionally desirable to put a string constant in there without having to strdup() it all the time... let's just live with the tiny implicit assumption that the data we'd want to modify (phandle references, mostly) will never be added from string constants, and put a cast in dt_add_string_prop(). Change-Id: Ifac103fcff0520cc427ab9a2aa141c65e12507ac Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32868 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Have absolute paths start with '/'Julius Werner
Currently DT paths are *not* expected to start with '/'. This is not what the spec says (see Devicetree Specification v0.2, 2.2.3 Path Names) and also not what is done by Linux. Change dt_find_node_by_path() to expect paths to start with '/' and add a leading '/' to all DT path strings. Besides the compatibility with the spec this change is also needed to support aliases in the future. This patch was adapted from depthcharge's http://crosreview.com/1252770 Change-Id: Ibdf59ccbb4ead38c6193b630642fd1f1e847dd89 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32865 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Drop sub-node path lookup from dt_find_node_by_path()Julius Werner
Besides looking up a node with an absolute path dt_find_node_by_path() currently also supports finding a sub-node of a non-root node. All callers of the function pass the root node though, so it seems there is no real need for this functionality. Also it is planned to support DT path names with aliases, which would become messy in combination with the lookup from a sub-node. Change the interface of dt_find_node_by_path() to receive the DT tree object instead of a parent node and adapt all callers accordingly. This patch was adapted from depthcharge's http://crosreview.com/1252769 Change-Id: Iff56be4da2461ae73a7301dcaa315758d2a8c999 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32864 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Add phandle caching and lookupsJulius Werner
This patch caches phandles when unflattening the device tree, so we don't have to look up the phandle property again every time we're trying to find the phandle of a node. This is especially important when supporting phandle lookups, which are also added. In addition we keep track of the highest phandle in the whole tree, which will be important for applying overlays later. With this, dt_get_phandle(node) becomes obsolete because the phandle is already available as a member variable in the node. This patch was adapted from depthcharge's http://crosreview.com/1536385 Change-Id: I9cbd67d1d13e57c25d068b3db18bb75c709d7ebe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32863 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04soc/intel/cannonlake: Do not read SPD again if index hasn't changedFurquan Shaikh
With the recent refactoring of memory configuration in CB:32513 ("soc/intel/cannonlake: Support different SPD read type for each slot"), meminit_cbfs_spd_index ends up reading SPD from CBFS for each slot. However, for mainboards that use the same SPD index for each slot this is unneccessary. This change adds a check to see if spd_data_ptr is not NULL and current spd index is the same as the last call to decide if SPD read from CBFS should be skipped. TEST=Verified that SPD gets read only once on hatch. Change-Id: I91963b55cea534c92207b2cd9f0caa96df8f222b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33137 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03src/soc/intel: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects pointer mem_info as NULL_RETURNS. Add sanity check for mem_info to prevent NULL pointer dereference. BUG=CID 1401394 TEST=Built and boot up to kernel. Change-Id: I9d78ab38b8b2dd3734e0143acfd88d9093f16ce6 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33152 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03soc/intel: Replace UART_BASE() and friends with a KconfigNico Huber
Re-add the Kconfig CONSOLE_UART_BASE_ADDRESS. It was lost by accident on APL at least. It is used outside of soc/intel/ scope, e.g. to con- figure SeaBIOS. As we only ever configure a single UART for the coreboot console, we don't need different addresses for each possible UART. Which saves us a lot of code. Change-Id: I28e1d98aa37a6acb57b98b8882fc4fa131d5d309 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-03src/soc/intel/common/block/sgx: Add missing new linesChristian Walter
Added missing new lines to Debug Output. Change-Id: I30f208a60661451bc0794c705113e8d19a68b0eb Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33035 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>