summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2019-05-02soc/intel/{broadwell, skylake}: Remove unused pch_log_state() declarationSubrata Banik
This patch removes unused pch_log_state() function declaration from pch.h because elog.c has static implementation of pch_log_state(). Change-Id: Ib0f3831dc3b60af2ee432a76866e401a51b96fb7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32505 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-02soc/intel/icelake: Add chipset event loggingSubrata Banik
This patch ports CB:30718 and CB:31908 changes from CNL to ICL. Add logging of chipset events on boot into the flash event log. This was tested on a google/dragonegg board to ensure that events like "System Reset" are added to the log as expected. Also fix GEN_PMCON bit checks as below: ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A and so this change updates the check for these bits to use GEN_PMCON_A instead of GEN_PMCON_B. Change-Id: I25ec32e81f8801f8d5e69c6095ffed73d75dded6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-05-02soc/intel/icelake: Clear PMCON status bitsSubrata Banik
This patch ports CB:31902 changes from CNL to ICL. The prev_sleep_state value was showing 5 even after warm reboot, once the SUS_PWR_FLR bit is being set. This bit was not being cleared. Hence clearing the PMCON status bits. Change-Id: Ia07aa17b4491216a277c36edfe6ed2aa489287c6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32503 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-01mb/google/sarien: Disable S5 wake on LAN by defaultEric Lai
Chromebook doesn't require support wake on LAN in S5. Disable it by default for power saving. BUG=b:131571666 TEST= check LAN indicator is off under S5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia90c9d2f3ea9b3580e9a7bbfb47c917dd51e3c03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-01soc/intel/common: Set RX_DISABLE for pads configured as NCFurquan Shaikh
For GPIO pads that are configured as no-connect (PAD_NC), setting it as GPI (with Rx enabled) leads to GPE0_STS being set incorrectly. Though this is not an issue in practice (GPE0_EN is not set, so no events triggered), it can confuse users when debugging GPE related issues. This change configures PAD_NC to have Rx disabled along with Tx to ensure that it does not end up setting GPE0_STS bits for unwanted GPIO pads. P.S.: IOSSTATE config does not have a TxDRxD setting, so leaving that configuration as is. BUG=b:129235068 TEST=Verified that GPE0_STS bits are not set for pads that are marked as PAD_NC. Change-Id: I726cc7b86a94e7449352cd8a8806d4d775c593dc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2019-04-30rockchip: rk3399: increase memory for fit payload.Marty E. Plummer
Increase ramstage to 2M, required to actually embed the 7.2mb uImage into the coreboot.rom, increase the postram cbfs cache in order for the fit image to be loadable (without this increase the fit payload is found but not loaded) Change-Id: Iee0ed9f7958588ceda54bb32253c84cac68abea2 Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-30vboot: refactor OPROM codeJoel Kitching
The name OPROM is somewhat inaccurate, since other steps to bring up display and graphics are needed depending on mainboard/SoC. This patch cleans up OPROM code nomenclature, and works towards the goal of deprecating vboot1: * Rename CONFIG_VBOOT_OPROM_MATTERS to CONFIG_VBOOT_MUST_REQUEST_DISPLAY and clarify Kconfig description * Remove function vboot_handoff_skip_display_init * Remove use of the VbInit oflag VB_INIT_OUT_ENABLE_DISPLAY * Add |flags| field to vboot_working_data struct * Create VBOOT_FLAG_DISPLAY_REQUESTED and set in vboot_handoff BUG=b:124141368, b:124192753, chromium:948529 TEST=make clean && make test-abuild TEST=build and flash eve device; attempt loading dev/rec modes BRANCH=none Change-Id: Idf111a533c3953448b4b9084885a9a65a2432a8b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29rockchip/rk3399: Select VBOOT_MIGRATE_WORKING_DATAJulius Werner
Trusted Firmware places some components in SRAM on RK3399 and therefore restricts accesses to SRAM to the secure world. This makes the vboot working data inaccessible to normal world payloads, so we need to migrate it into CBMEM. Change-Id: Ic7c95790f2f118ccbdd897550f13b5f987bdd831 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-04-29mediatek: Add function to raise the CPU frequencyTristan Shieh
Implement mt_pll_raise_ca53_freq() in MT8183 to raise the CPU frequency. Move the function declaration to common header. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: Ide8d767486d68177fa2bfbcc5b559879eca1bcda Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29mediatek/mt8183: Set CPU frequency to 1417MHzTristan Shieh
With the default CPU voltage (0.8v), CPU frequency should be 1417Mhz at most. We have to raise CPU frequency to 1989MHz after increasing CPU voltage to 1.05v in romstage. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I4c3e0fa27ccda8e0efe422b6ab503a1efb1697e9 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29Revert "soc/intel/common/block: add VMX support"Nico Huber
This reverts commit 9aae51ad1141a47d5c2f7133b02f5f0ab6168860. Proper code in cpu/intel/common/ shall be used instead. Change-Id: I4a5d558b03497d106083eece10c5b34e0e7cbb2d Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29683 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29soc/skl: set IGD resources only if device is enabledMaxim Polyakov
If the Intel IGD device pci 02.0 is disabled or undefined in the device tree, then internal graphics pre-allocated memory and GFX-VT MMIO memory for virtualization won`t be allocated in the SoC address space. Thus, patch resolves the FSP-S hang problem on Skylake/ Kaby Lake processors when the IGD device is disabled. This should provide to run FSP 2.0-based coreboot on these CPUs families without integrated graphics card. The following boards were used for testing: - Asrock H110M-DVS board (desktop i5-6600) & NVIDIA GTX 1060 as external GPU. Virtualization and GFX 3D acceleration with nouveau driver still works well (tested on VirtualBox 5.1.38 with Ubuntu 18.04.1 as guest and host OS) - Intel KBL-R U RVP board (mobile i5-8350u) without GFX. Payload: tianocore edk2-stable201811-216-g51be9d0. Change-Id: Id7a0cba582d83e3fe7e8d20342ee219cdd369a53 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32467 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29mediatek/mt8183: Init audio related clockJiaxin Yu
Enable audio clock, intbus clock, infra clock and mtkaif 26m clock.Needed by audio playback in firmware. BUG=b:117254418 BRANCH=none TEST=Build pass and verified on kukui p1 board Change-Id: I88060d9796cc23ad7f524943f36869e1ec85073d Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-29soc/intel/apollolake/bootblock: Clear the GPI IS & IE registersKarthikeyan Ramasubramanian
Clear the GPI Interrupt Status & Enable registers to prevent any interrupt storms due to GPI. BUG=b:130593883 BRANCH=octopus TEST=Ensure that the Interrupt status & enable registers are reset during the boot up when the system is brought out of G3, S5 & S3. Ensure that the system boots fine to ChromeOS. Change-Id: Ia3b9d3bf08472219348e20b53bae470c589039fb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel/common: Add support to clear GPI IS & IE registersKarthikeyan Ramasubramanian
Add support to reset the GPI Interrupt Status & Enable registers so that the system does not experience any interrupt storm from a GPI when it comes out of one of the sleep states. BUG=b:130593883 BRANCH=None TEST=Ensure that the Interrupt status & enable registers are reset during the boot up. Ensure that the system boots fine to ChromeOS. Change-Id: I99f36d88cbab8bb75f12ab1a4d06437f837841cb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel: Add GPI interrupt config register offset infoKarthikeyan Ramasubramanian
Add the offset information for GPI interrupt status and enable register in the pad_community structure. Populate the concerned information for individual SoCs. This offset information is required to clear the interrupt configuration during the bootup. BUG=b:130593883 BRANCH=None TEST=Ensure that the interrupt configuration are cleared during bootup. Ensured that the system boots to ChromeOS. Change-Id: I8af877a734e8d49b700d720b736da8764985a8f8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel/braswell: Move LPE ACPI code to mainboardFrans Hendriks
The ACPI code of LPE device is included regardless of the availability of the LPE controller. Linux remains requesting the status of device LPEA even if this device is disabled. Include ACPI LPE controller code at Braswell mainboards with LPE enabled. BUG=N/A TEST=Linux 4.17+ on Portwell PQ7-M107 Change-Id: Ic8acf9ea9e9b0ba9b272e20beb2023b7a4716a73 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-04-29soc/intel/cannonlake: Modify dq_map to provide for 6 entriesPaul Fagerburg
Intel's DQ_DQS_RComp_Info_Utility generates data for 6 entries. MRC will return errors if we don't have all 6 entries in the map. BRANCH=none BUG=b:131103736 TEST=ensure the firmware builds without error; I don't have hardware available to test this just yet. Change-Id: I20a768de0e4440d7dde7b717794c4e2d0c62819c Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-26soc/intel/apl/acpi: Do not report 8259 PICsNico Huber
The IRQ tables don't support this path, so we shouldn't report presence of the legacy PICs. As the _PIC method is optional and we ignore the passed parameter anyway, drop it. Change-Id: I51301a600e16f74fde00fdcb4595e1f47a52e207 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-04-26soc/{amd,intel}/chip: Use local include for chip.hElyes HAOUAS
Change-Id: Ic1fcbf4b54b7d0b5cda04ca9f7fc145050c867b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-26soc/amd/stoneyridge: Generate MCFG tableRaul E Rangel
BUG=crbug:948241 TEST=Booted and decompiled the table [000h 0000 4] Signature : "MCFG" [004h 0004 4] Table Length : 0000003C [008h 0008 1] Revision : 01 [009h 0009 1] Checksum : 15 [00Ah 0010 6] Oem ID : "COREv4" [010h 0016 8] Oem Table ID : "COREBOOT" [018h 0024 4] Oem Revision : 00000000 [01Ch 0028 4] Asl Compiler ID : "CORE" [020h 0032 4] Asl Compiler Revision : 00000000 [024h 0036 8] Reserved : 0000000000000000 [02Ch 0044 8] Base Address : 00000000F8000000 [034h 0052 2] Segment Group Number : 0000 [036h 0054 1] Start Bus Number : 00 [037h 0055 1] End Bus Number : 40 [038h 0056 4] Reserved : 00000000 Change-Id: I46dc1959971af4685a7ffd285429175d6882ae86 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-04-25cpu/intel/car/non-evict: Select NO_FIXED_XIP_ROM_SIZEArthur Heymans
CPU's featuring a non eviction mode cache the whole ROM. Therefore XIP stages don't need to follow some alignment constraints. Change-Id: I4a30f31baa0f90279c0690ceb6aefea6de461bd9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-04-25soc/cavium/common/bootblock: Remove unused variablesElyes HAOUAS
Change-Id: I4835ca3e20f2e53598bfc77b633aca946d3fde9c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-04-25src/soc/intel: Remove unused variablesElyes HAOUAS
Change-Id: Ie81377a31e6527c5fd5aaea99f08527912e870a0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-04-253rdparty/fsp: Update submodule pointer to upstream masterMatt DeVillier
Update submodule pointer to pull in newly-updated Braswell FSP. Adjust FSP_FD_PATH for soc/cannonlake due to filename case change. Change-Id: I02ee0d32fd4c04cd4971eff20fc5a7de3f9b07ec Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-24mediatek/mt8183: Set CPU frequency to 1989MHzTristan Shieh
Set CPU frequency from 1100MHz to 1989MHz to improve booting time. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: Id41c7ea8905c4db2537a5c32f96eb7c6b2c008ea Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32397 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mediatek/mt8183: Set processor voltage to 1.05vTristan Shieh
The maximum CPU frequency is 1417MHz with current processor voltage (0.8v). Set processor voltage to 1.05v for higher CPU frequency. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I24ecdac2c85d3f012d9235449c0d727d727dc185 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-23soc/qualcomm/qcs405: add console.h includePatrick Georgi
Change-Id: I556d00e8b06f631a5ca51ae2b5ba646e5f536480 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32422 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23qcs405: Add support of GPIO IRQ APIsTaniya Das
Add support of GPIO IRQ APIs. Change-Id: I11715a93999012622a5e28455731cbe249ba8f2c Signed-off-by: Shefali Jain <shefjain@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-23qcs405: clock: Update SPI APITaniya Das
Update SPI enable/disable and configure clock API for supporting all the blsp and qup for qcs405. Change-Id: I39622571cb671f62312283a010129ceecb654f61 Signed-off-by: Shefali Jain <shefjain@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-23soc/intel/cannonlake: add missing console.h includePatrick Georgi
Change-Id: Ic23eb57a4096d4301d7f9478d8e65aaeb233de7b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32399 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-04-23soc/intel/common/acpi: Add dynamic method around sleepLijian Zhao
Declare plaform level hook method before and after system sleep for possible power management related usage. BUG=N/A TEST=pass with make what-jenkins-does Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ie63711748b6dbb99d34910824f2059464543e162 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32366 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/amd/common: Remove AmdReadEventLog()Kyösti Mälkki
Parameter passing is incorrect here, it should pass complete StdHeader instead of attempting to fill in HeapStatus that should be treated as a field private to AGESA, based on where it is defined in the header files. Furthermore the while() loop did not evaluate the return value. Feature can be brought back at a later date after someone verifies it actually works correctly across different stages. Change-Id: Ib243b275f8700ecaeb330772c795d305c61899c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31484 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/amd/common: Introduce agesa_execute_state()Kyösti Mälkki
Each entrypoint to AGESA goes through the same sequence and have same the function signature. To avoid introducing bunch of preprocessor magic, rename all the agesawrapper_amdXXX() functions that are actual entrypoints to AGESA API, make them static, and provide a single exposed entry function agesa_execute_state(). Change-Id: I96ae1874132da3843aa42c2f4e8a59ec771d3893 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31483 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/intel/cannonlake: Enable PlatformDebugConsent by KconfigKane Chen
This change is mainly to control PlatformDebugConsent FSP UPD. PlatformDebugConsent is enabled if SOC_INTEL_CANNONLAKE_DEBUG_CONSENT != 0. PlatformDebugConsent in FspmUpd.h has the details. BUG=b:130203864 TEST=boot ok and PlatformDebugConsent can be controlled by Kconfig Change-Id: Ib845b5e42bc78fb352a0c97c6301f2aeca522f29 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32297 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/intel/common: Add SOC_INTEL_DEBUG_CONSENT to control debug interfaceKane Chen
SOC_INTEL_DEBUG_CONSENT config is generally to enable default debug interface of SoC. Ex: USB DBC, DCI debug interface on cnl, whl, cml. Change-Id: I313d80d6c63fd37164c63f78e9e69d3cb4a5566b Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32337 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/intel/braswell/acpi/lpss.asl: Remove SPI1 and PWM asl codeFrans Hendriks
Linux remains using SPI1 and PWM ASL even if these devices are disabled. SPI1 and PWM are disabled by Intel FSP. Remove ASL code. BUG=N/A TEST=Boot Ubuntu on Intel CherryHill CRB Change-Id: Iec2ca7520081d00bf7a53d58ee054aa6f23e5606 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-04-23soc/intel/cannonlake: Add null reference check for Cnvi and XdciAamir Bohra
Change-Id: I2e1011d9ac93ed764b6c2aa425928a972ec2aa43 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32322 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23src: include <assert.h> when appropriateElyes HAOUAS
Change-Id: Ib843eb7144b7dc2932931b9e8f3f1d816bcc1e1a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Guckian
2019-04-23src: Use include <console/console.h> when appropriateElyes HAOUAS
Change-Id: Iddba5b03fc554a6edc4b26458d834e47958a6b08 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-23src: Add missing include 'console.h'Elyes HAOUAS
Change-Id: Ie21c390ab04adb5b05d5f9760d227d2a175ccb56 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-04-23Klocwork: Fix the Null pointer derefernce found by klocworkThejaswani Putta
Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I15973ac28e9645826986cf63d2160eedb83024e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32290 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-22Revert "soc/intel/cannonlake: Enable coreboot MP PPI service for WHL/CML"Lijian Zhao
This reverts commit 41dad286d846819242a84fc65faed2bbb35845ac. The change will make s0ix fail on Sarien/Arcada Platform. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I169bc6f41fba82fcf515267e8e1d08aa5ee2dce4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32391 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-21cpu/x86: Move checking for MTRR's as a proxy for proper CPU resetArthur Heymans
Checking for empty MTRR_DEF_TYPE_MSR as a proxy for proper CPU reset is common across multiple platforms. Therefore place it in a common location. Change-Id: I81d82fb9fe27cd9de6085251fe1a5685cdd651fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-21soc/amd/stoneyridge: Fix gnvs aoac initializationMarshall Dawson
Correct the SD and SATA assignments. TEST=Boot Grunt BUG=b:130788333 Change-Id: Ib75e1dbb0cd7f90a8d297d11d3a7c3bad47a8d21 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2019-04-19soc/intel/cannonlake: Add report for iGD 0x3ea1Lijian Zhao
Integrated graphics id 0x3ea1 reported as unknown in bootblock stage, make it correct. BUG=N/A TEST=Boot up into sarien platform and check with serial log, it shows IGD: device id 3ea1 (rev 02) is Whiskeylake ULT GT1. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I2c4c697b108be7fa74736514ca71469a1ca29c22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-04-19soc/intel/common: Inject SMBIOS type 16 tableLijian Zhao
Add SMBIOS type 16 table for physical memory array, there's two item had been left over.ECC and max capacity, as of now we set it to fixed value as all the platform support by Intel common code don't support ECC memory and so far the biggest capacity is 32GB. BUG=b:129485635 TEST=Boot up with Sarien platform and check with dmidecode, the following is the result: Handle 0x000D, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 2 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: If9c5831956ef273c84d831a2b1572b3442eed961 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32286 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-18soc/intel/cnl: Generate DMAR ACPI tableJohn Zhao
The platform supports Virtualization Technology for Directed I/O. Generate DMAR acpi table if VT-d feature is enabled. BUG=b:130351429 TEST=Booted to kernel and verified the DMAR table contents. Change-Id: I4e1ee5244c67affb13947436d81628c5dc665c9e Signed-off-by: John Zhao <john.zhao@intel.com> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-04-17soc/intel/common: Add the audio PCI device ID for CometlakeV Sowmya
This patch adds the PCI device ID for cometlake in dsp.c Change-Id: Ia28e3b9d1dc27ffcf24dfb2ef1efa9ae9c4027c8 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-04-17soc/intel/common/timer: Calculate TSC frequency based on CPUID 0x15Subrata Banik
This patch ensures to follow Intel SDM Vol 3B Sec 18.7.3 to calculate nominal TSC frequency. As per SDM recommendation: For any processor in which CPUID.15H is enumerated and MSR_PLATFORM_INFO[15:8] (which gives the scalable bus frequency) is available, a more accurate frequency can be obtained by using CPUID.15H This patch also adds header file to capture Intel processor model number. BUG=b:129839774 TEST=Boot ICL platform and calculate TSC frequency using below methods 1. TSC freq calculated based on MSR 0xCE tsc: Detected 1600.000 MHz processor 2. TSC freq calculated based on CPUID 0x15 tsc: Detected 1612.800 MHz TSC Method 2 actually reduce ~25ms of boot performance time. Note: Method 2 is recommended from gen 6 processor onwards. Change-Id: I9ff4b9159a94e61b7e634bd6095f7cc6d7df87c7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-04-17mediatek: Use the 64-bit timerTristan Shieh
GPT4 is a 32-bit timer and the counter of GPT4 will overflow in about 330 seconds (0xffffffff / 13MHz). Timer and delay functions will not work properly if the counter overflows. To fix that we should use the 64-bit timer (GPT6). BUG=b:80501386 BRANCH=none Test=emerge-elm coreboot; emerge-kukui coreboot Change-Id: I9f080e47253a1b1bab4636a45cb86c8666a25302 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com>
2019-04-16soc/intel/cannonlake: Configure Vmx support using KconfigRonak Kanabar
Change VmxEnable UPD values based on Kconfig ENABLE_VMX and remove it from Devicetree and chip.h Remove Vmx dependency on Vt-d Change-Id: I4180c2270038a28befd6ed53c9485905025a15ba Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32117 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-16soc/intel/cannonlake: Implement soc side VMX supportRonak Kanabar
Implement required soc side API to enable VMX support using CPU_COMMON BUG=b:124518711 TEST= read msr 0x3a and verify vmx is enabled (value should be 5). Change-Id: I33dbffa6301afabd688080751ba3b85a43e00156 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-16soc/intel/cannonlake: Enable coreboot MP PPI service for WHL/CMLSubrata Banik
This patch performs MP initialization by FSP using coreboot MP PPI service. BUG=b:74436746 TEST=Able to perform MP initialization on WHL and CML platform. Change-Id: I530d50e5aacc3cb9b625df14a50d4c5923e3fb4d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2019-04-13soc/intel/cpulib: Remove redundent enable/disable functionsSubrata Banik
This patch removes multiple enable/disable function definitions and make use of single function with argument to know feature status (enable/disable). Change-Id: I502cd2497b07e9de062df453ecbb9c11df692f5a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32282 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-13soc/intel/cpulib: Factor out IA32_PERF_CTL (0x199) MSR codeSubrata Banik
This patch replaces multiple IA32_PERF_CTL programming with single helper function. TEST=Build and boot WHL and CML platform. Change-Id: I212daa61aa11191dd832630461b517d3dbedd6e1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-12soc/intel/cannonlake: Select FSP_M_XIPFurquan Shaikh
Cannon Lake and family require that FSP-M component should be XIP. This change selects FSP_M_XIP so that the right arguments are passed into cbfstool when adding this component. BUG=b:130306520 TEST=Verified that hatch boots fine to OS. Change-Id: Ifd8a829ebdc7681c81ece4540aa38cdcea7b6fac Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-12soc/intel/cannonlake: Do not use XIP_ROM_SIZEFurquan Shaikh
XIP_ROM_SIZE Kconfig option isn't used on Cannon Lake and family. Thus, this change selects NO_FIXED_XIP_ROM_SIZE to indicate to build system so that romstage can be placed in less rigid manner. BUG=b:129802811 Change-Id: I5f3786396246c89b1039ba1b6b332a32e6a0345d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-11soc/intel/cannonlake: Correct the GPE DWx mapping for GPIO groupsAamir Bohra
This implementation corrects the GPE DWx mapping for GPIO groups. The assignments is done in GPIO MISCFG register for all GPIO communities. And configures the which GPIO communities get register as Tier1. BUG=b:121212459 TEST: Verified the GPIO MISCFG is getting set as per updated map. Change-Id: I451997367025a6dc9e5931bd649524e935ad6aca Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32175 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-09src: Fix remaining #include <timer.h>Nico Huber
Follow-up to add76f91d5 (src: Use #include <timer.h> when appropriate). Change-Id: I7813daa0b73039ec76d33a16ce3ae0ce6cc7f2cc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-04-08soc/amd/stoney: Don't use IS_ENABLED() for a constantNico Huber
IS_ENABLED() was supposed for Kconfig options. Change-Id: Ia40d64856cd89586133e54ff6e02c35d6b647059 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32225 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08Replace remaining IS_ENABLED(CONFIG_*) with CONFIG()Nico Huber
Another run of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I3243197ab852a3fbc3eb2e2e782966a350b78af2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-08soc/intel/baytrail: Correct array bounds checkJacob Garber
If `gms == ARRAY_SIZE(gms_size_map)`, then we will have an out of bounds read. Fix the check to exclude this case. This was partially fixed in 04f68c1 (baytrail: fix range check). Found-by: Coverity Scan, CID 1229677 (OVERRUN) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I8c8cd59df49beea066b46cde3cf00237816aff33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-08soc/skl: Update SkipExtGfxScan in UPD from devtreeMaxim Polyakov
The SkipExtGfxScan option is defined in the device tree, but doesn`t update the value in the UPD. It uses the default value - 0. This means that the FSP will scan all external graphics devices, in spite of the configuration in devicetree.cb for a specific board. Patch updates SkipExtGfxScan options in UPD from devicetree.cb. This change affects all boards with skl/kbl processor. Change-Id: Ie88a41bdf31f7c3e88df6c70c82a1cbf866372c4 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-08src/soc/intel/fsp_baytrail/smm.c: add bootstate entry for locking SMIMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ia296a680217a38136c063cae6ed619df0c497795 Reviewed-on: https://review.coreboot.org/c/coreboot/+/30753 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08{src,util}: Correct typo in comment and debug stringFrans Hendriks
Correct typo in comment and debug string. BUG=N/A TEST=build Change-Id: I0362bb8d7c883e7fcbc6a2fc2f9918251f0d8d6e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29321 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08src/soc/intel/cannonlake: Remove ITSS IPC restoreAamir Bohra
Remove ITSS IPC restore for cannonlake, as it does not take effect since the ITSS PCR registers are locked post FSP-S. Change-Id: Ie39e0d43644cb7b03b6c3432f0965f1d76d1bc37 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-06src: Use #include <timer.h> when appropriateElyes HAOUAS
Also, extra-lines added or removed and local includes moved down. Change-Id: I5e739233f3742fd68d537f671642bb04886e3009 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32009 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-06soc/intel/skylake: Set FSP options for PEG portMaxim Polyakov
FSP options list (for each PEG port): - PegXEnable, - PegXMaxLinkWidth, - PegXMaxLinkSpeed, - PegXPowerDownUnusedLanes, - PegXGen3EqPh2Enable, - PegXGen3EqPh3Method. Add PegMaxLinkWidth to chip.h. This option overrides the number of active lines from the devicetree.cb for each enabled PEG port (for example for boards that use x4 instead of x16 lines in PEG0). If the PegMaxLinkWidth is not defined, the port uses the maximum possible number of lines. To enable or disable the corresponding PEG root port you need to add to the devicetree.cb: device pci 01.0 on end # enable PEG0 root port device pci 01.1 off end # do not configure PEG1 If PEG port is not defined in the devicetree, it will be disabled in FSP. It has been tested on ASRock H110M-DVS motherboard (Skylake i5-6600 CPU). Change-Id: I23708f7060edf08739adf61fe61a419329907563 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32045 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
The InternalGfx option in devicetree.cb is not used to enable iGPU. The patch removes this option from chip.h and mb/*/devicetree.cb files for all boards with skl/kbl processor. Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-06soc/intel/skylake: Update GFX devtree optionsMaxim Polyakov
This patch includes the following changes: 1. Sets FSP options in romstage_fsp20.c to select primary GPU. List of options: - InternalGfx, - PrimaryDisplay. 2. iGPU will be initialized if the corresponding PCI device is defined in the device tree as: device pci 02.0 on end In this case, it is not necessary to set the InternalGfx option to enable this device 3. Primary_iGFX is used as the default value for all skl/kbl boards (since the PrimaryDisplay option isn`t defined in the devicetree.cb) Change-Id: Ie3f9362676105e41c69139a094dbb9e8b865689f Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-04soc/intel/braswell: Correct serial IRQ supportFrans Hendriks
Serial IRQ was configured in quiet mode, but not enabled. Enable serial IRQ and use 'enum seriirq_mode' as a devicetree option. Function sc_enable_serial_irqs() is added to enabled serial IRQs. enable_serirq_quiet_mode() is renamed to sc_set_serial_irqs_mode(). This function use the 'serirq_mode' to set the mode. The call to this function is moved from finalize to init having serial IRQs enable in early stage. Serial IRQs must be enabled in continuous mode for at least one frame before switching into quiet mode. BUG=N/A TEST=Portwell PQ7-M107 Change-Id: I7844cad69dc0563fa6109d779d0afb7c2edd7245 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-04-04soc/nvidia/tegra210: Increase bootblock sizeMartin Roth
There's an issue with the newest toolchain that is blowing the bootblock size on Smaug when compiling for chromeos. Increasing the bootblock size by 2KB will take care of the issue for a while. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I58f7f1cedc8fc5b4c4287f5a120ed76140e1f7a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-04-02mediatek/mt8183: Fix RTC initialization flowRan Bi
1. Fix RTC lpd settings. Rewrite powerkeys after lpd init to enable low power detect function. 2. Rearrange RTC initialization flow. 3. Add return status for rtc_init. 4. Add log if calling pwrap_write or pwrap_read fail. 5. Increase timeout time to resolve unexpected timeout. BUG=b:127405695 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I6f26edd6699c2f6d9af80c285b70742b44407136 Signed-off-by: Ran Bi <ran.bi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2019-04-01vboot: Select CONFIG_VBOOT_OPROM_MATTERS in more casesJulius Werner
This patch enables CONFIG_VBOOT_OPROM_MATTERS in a few more cases where I think(?) it should be. Haswell, Broadwell and Baytrail Chromebooks have this enabled in their old depthcharge firmware branches -- we presumably just forgot to move it over when vboot2 migrated the option to coreboot. Braswell didn't, but it seems like this requirement was added when it was migrated to FSP 1.1...? (Not very sure about that one, but it does call load_vbt() right now which executes things based on display_init_required().) Additionally, it seems to make sense to enable it whenever the user explicitly selects VGA_ROM_RUN in menuconfig (like one of the Intel defconfigs does). Once we have all this, one could take a step back and ask whether this option still makes sense at all anymore. It's enabled for almost all devices (that work with vboot at all), it will presumably be enabled for all future devices, and it seems that most devices that don't enable it use libgfxinit, which as far as I can tell isn't gated on display_init_required() but probably should be. Realistically, whatever kind of display init a board needs to do (native or option ROM), it's probably expensive enough that it's worth skipping on a normal mode vboot boot, and we'd want to have this enabled by default on everything except boards that actually don't have a display. So maybe we should flip it around to CONFIG_VBOOT_OPROM_DOESNT_MATTER, but doing that would probably lead to nobody ever selecting it at all. Not sure what the best solution there is yet, but I think this patch at least moves things in the more correct direction. Change-Id: Id96a88296ddb9cfbb58ea67d93e1638d95570e2c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-01soc/intel/cannonlake: Add FSP UPD to unlock GPIO pads in devicetreeKrishna Prasad Bhat
FSP has a UPD to unlock all GPIO pads. This parameter is disabled by default. Add a chip parameter so that GPIO pads can be unlocked on mainboard level in devicetree and therefore this feature can be used if needed. BUG=b:128686027 Change-Id: Iad9e8a209dc3f8ca0c994e8c1da329918409a1d4 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-29src: Use include <reset.h> when appropriateElyes HAOUAS
Change-Id: I3b852cae4ef84d257bf1e5486447583bdd16b441 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-29soc/intel/cannonlake: Ignore GBE LTRLijian Zhao
Ignore integrated GBE controller LTR setting to make it wake up from s0ix with 10/100M cable attached. BUG=b:122435844 TEST= Test on sarien platorm, after the changes sytem can wake by WOL, and also checked SLP_S0 residency can increase with 10/100M cable and battery connected. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Iec7dd197b8a456751f8e4dcb19e3e153f5888613 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-29soc/intel/icelake: Fix chipset_power_state structureSubrata Banik
This patch ports CB:30717 changes from CNL to ICL. This structure is declared as a static CAR_GLOBAL in the common PMC library code and in the SOC specific code. Remove the SOC specific version and instead get the chipset_power_state pointer from the PMC library. This fixes events that were recorded in chipset_power_state at boot but were reading as all zero when it was time to parse the structure when logging events to flash. Change-Id: I1152d0e882e1acf475072d1553b74f9161e2f485 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32095 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28qcs405: Add support for USB host modeVijayavardhan Vennapusa
Add required changes for USB host mode for USB disk enumeration. TEST=build & run Change-Id: I35ec549b49b9789389c80843f6103e7243d52aac Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Signed-off-by: Vijayavardhan Vennapusa <vvreddy@partner-android.googlesource.com> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-28soc/intel/apollolake: Add support to log XHCI wake eventsKarthikeyan Ramasubramanian
Add support to identify and log the XHCI wake events for apollolake into event logs. BUG=b:123429132 BRANCH=None TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up events due to USB are logged into the event logs. 6 | 2019-03-21 09:22:18 | S0ix Enter 7 | 2019-03-21 09:22:22 | S0ix Exit 8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9 9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13 10 | 2019-03-21 09:23:20 | ACPI Enter | S3 11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9 12 | 2019-03-21 09:23:30 | ACPI Wake | S3 13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13 Change-Id: I55b850646dda8acaa086a9012c2d8b611016f932 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32000 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28soc/intel/common: Move support to log XHCI wake eventsKarthikeyan Ramasubramanian
The policy to identify and log the XHCI wake events is similar between skylake and apollolake. Hence move the similar parts to a common location. BUG=b:123429132 BRANCH=None TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up events due to USB are logged into the event logs. 6 | 2019-03-21 09:22:18 | S0ix Enter 7 | 2019-03-21 09:22:22 | S0ix Exit 8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9 9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13 10 | 2019-03-21 09:23:20 | ACPI Enter | S3 11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9 12 | 2019-03-21 09:23:30 | ACPI Wake | S3 13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13 Change-Id: Ia6643342e3292984e422ff3c3fcd4bc0d99f947e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28soc/intel/cannonlake: Update CPU Ratio base on MSRLijian Zhao
The following is the FSP logic: as long as the Cpu Ratio input in coreboot is different with CpuStrapSet, system will force to follow input from coreboot. But CpuStrapsetting is floating, it will be 0 from the first cold boot before memory training and set to 0x1c (or max CPU ratio for the installed CPU) after first memory training. The previous fix was attempting to ensure settings were cleared when FSP was called in recovery mode, but only when coming from S5 which caused issues if recovery mode is requested by the OS and is only followed by a warm reset. BUG=b:129412691 TEST=Boot up sarien platform and force recovery, check there's no reset in the path of recovery. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I959188be46343bc6f2cb3cc149097b4d449802aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/32089 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27soc/intel/cannonlake: Configure voltage margining policiesKrzysztof Sywula
For systems that integrate GbE controllers, following parameters should be configured: SlpS0WithGbeSupport: enable PchPmSlpS0VmRuntimeControl: disable, PchPmSlpS0Vm070VSupport: disable, PchPmSlpS0Vm075VSupport: disable. TEST=boot on any GbE supported WHL platform Change-Id: I02aaf0b77b8fc1555a3a424c02acfada21707d0e Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-27Move calls to quick_ram_check() before CBMEM initKyösti Mälkki
After raminit completes, do a read-modify-write test just below CBMEM top address. If test fails, die(). Change-Id: I33d4153a5ce0908b8889517394afb46f1ca28f92 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-27device/pciexp_device: Convert LTR non-snoop/snoop value into common macroSubrata Banik
Change-Id: I3d14a40b4ed0dcc216dcac883e33749b7808f00d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-03-26qcs405: clock: Adding the clock support for qcs405Pranav Agrawal
Add basic clock support and enable UART, SPI clocks. Change-Id: I991bdde5f69e1c0f6ec5d6961275a1c077bc5bae Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Signed-off-by: Pranav Agrawal <pranava@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-26qcs405: Add GPIO APINitheesh Sekar
Introduce new and required GPIO APIs, using common pinmux definitions for GPIO configuration. TEST=build & run Change-Id: I85ce9007c545b44371c4704a0456774d0eff12a8 Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-25vboot: remove VBOOT_EC_SLOW_UPDATE Kconfig optionJoel Kitching
This option has been relocated to depthcharge: https://crrev.com/c/1524806 BUG=b:124141368, b:124192753 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild CQ-DEPEND=CL:1524806 BRANCH=none Change-Id: Ib4a83af2ba143577a064fc0d72c9bc318db56adc Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31909 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-25soc/apollolake: Add UART0Felix Singer
In my case, on UPsquared board with Celeron N3350 CPU, I don't have UART2 but UART0. Change-Id: Id9a742144eba0f1d1544aafecf44d4730d055b4a Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-25Fix up remaining boolean uses of CONFIG_XXX to CONFIG(XXX)Julius Werner
This patch cleans up remaining uses of raw boolean Kconfig values I could find by wrapping them with CONFIG(). The remaining naked config value warnings in the code should all be false positives now (although the process was semi-manual and involved some eyeballing so I may have missed a few). Change-Id: Ifa0573a535addc3354a74e944c0920befb0666be Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-25soc/intel/cannonlake: Clear PMCON status bitsKrishna Prasad Bhat
The prev_sleep_state value was showing 5 even after warm reboot, once the SUS_PWR_FLR bit is being set. This bit was not being cleared. Hence clearing the PMCON status bits. BUG=b:128482282 BRANCH=None TEST=In cbmem logs, check for value of “prev_sleep_state” using command cbmem –c | grep “prev_sleep_state” For cold reboot, "prev_sleep_state 5" For warm reboot, "prev_sleep_state 0" Change-Id: If9863d52ed3c61b6a160df53f023b0787eaaed68 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-03-24intel/apollolake: Add HDA to disable_dev functionNico Huber
Change-Id: Id4f5e1fad935645830782ba922f55f614c72cf06 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31353 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-24soc/intel/common: Remove common chip config use_fsp_mp_initSubrata Banik
This patch ensures to make use of common MP Init Kconfig to choose desire method to peform MP initialization for platform. Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-24soc/intel/common: Add Kconfig option to choose desired MP Init for platformSubrata Banik
mainboard users can select correct MP Init Kconfig in order to perform MP initialization. 1. Native coreboot MP Init. 2. FSP to do MP Init. 3. FSP to make use of coreboot MP service PPI to perform MP Initialization Change-Id: Ifbea463fdaf97d68c21a759c37f49492d58a056b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22soc/intel/broadwell: Fix use of CONFIG_USBDEBUGKyösti Mälkki
Change-Id: I52c852fb449de5a6512aa2556592e6dfe7b0c573 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-03-22soc/intel/cannonlake: Enable power button smi in pre-OSKrzysztof Sywula
This change enables user to shutdown the system by shortly pressing power button (<10sec) before OS is loaded. Main use case is shutdown from recovery/broken screen. BUG=N/A TEST=Boot up into recovery screen on Sarien platform, press power button once, and system should shutdown immediatelly. Change-Id: I7655daf65ff058df7d9bad4567f74b4f4007acb4 Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-22soc/intel/{baytrail,braswell}: Make use of generic set_subsystem()Kyösti Mälkki
We missed some PCIe root ports with previous cleanup. Change-Id: I8bf8f8b2ca1836316f84fb7f01820a00d7194d51 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22arch/mips: Fix <arch/mmio.h> prototypesKyösti Mälkki
These signatures need to be consistent across different architectures. Change-Id: Ide8502ee8cda8995828c77fe1674d8ba6f3aa15f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:07:09 +0000