Age | Commit message (Collapse) | Author |
|
This patch moves the big CPU cluster initialization on the RK3399 from
the clock init bootblock function into ramstage. We're only really doing
this to put the cluster into a sane state for the OS, we're never
actually taking it out of reset ourselves... so there's no reason to do
this so early.
Also cleaned up the interface for rkclk_configure_cpu() a bit to make it
more readable.
BRANCH=None
BUG=chrome-os-partner:54906
TEST=Booted Kevin.
Change-Id: I568b891da0abb404760d120cef847737c1f9e3ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bd7aa7ec3e6d211b17ed61419f80a818cee78919
Original-Change-Id: Ic3d01a51531683b53e17addf1942441663a8ea40
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/377541
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16698
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
At higher SPI bus speeds the SPI RX value is not available in time for
sampling at the normal time. Add a delay to ensure that we read the
correct data.
The value of 40ns is chosen arbitrarily. In my testing I can use a sample
delay of 1 even at 24MHz. But since it is not necessary, I have left that
case alone. It kicks in at 25MHz and up.
BUG=chrome-os-partner:56556
BRANCH=none
TEST=boot on gru and see no change at current speed
Change-Id: I3ef335d9a532eaef1e76034bd02e185acf11176a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e9b620c47fc3e39211487507fadb8657afdebee7
Original-Change-Id: I65d66d752cbbbee4d02f475de23a52069a0e9782
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/381311
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Simon Glass <sjg@google.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16707
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch fixes a typo in the clock initialization code that caused the
PERILP1_PCLK_HZ constant to be ignored and the clock to always run at
the same speed as its parent (PERILP1_HCLK_HZ). Since we've done all our
previous tests and validation with this bug, we should probably increase
the value of the constant (that had not actually been used) to the value
that we had been incorrectly using instead (which also makes effective
SPI read times faster).
BRANCH=None
BUG=chrome-os-partner:56556
TEST=Booted Kevin.
Change-Id: Ibeb08f5fe5e984a74e3f57e60c62d4bfb644b6ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 06e605a5fcb9bdf13a3d301112380633b892fd4e
Original-Change-Id: Icb5e079f53eb22b0dbf0ea4d1c2ff08688e3fa8e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/381031
Original-Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/16703
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Output GPIOs should never have a pull-up or pull-down resistor attached
since they're actively driven. Since some GPIOs get initialized with a
pull at power-on reset, we should explicitly overwrite that setting.
Most other platforms do this on gpio_output, but Rockchip hadn't yet.
Also, shuffle some code around to make things cleaner and allow for
easier code reuse.
BRANCH=None
BUG=chrome-os-partner:52526
TEST=Booted Kevin.
Change-Id: I1425d074ea1e90f4484e1e84a8002b057192c5f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: df5b236bfd58b172435043c1cb792b917a4ec4ab
Original-Change-Id: I044266d71ef8bd0518316ff72d829d1ca1e30f35
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/382531
Original-Reviewed-by: Simon Glass <sjg@google.com>
Reviewed-on: https://review.coreboot.org/16710
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As far as I know, the Cortex-A53 cores in RK3399 are of a newer revision
that is not affected by ARM erratum 843419. If it was, the workaround
would also need to be enabled in libpayload and Chrome OS userspace,
which it currently isn't. I assume this was just incorrectly copied over
from another SoC and we can safely remove it.
BRANCH=None
BUG=chrome-os-partner:56700
TEST=Booted Kevin.
Change-Id: I5b1534c954a6d985499b481738723cabbdc07253
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4891cc866583532ee3dcb1a5ad5b81670eb0743d
Original-Change-Id: Iadb57428f8727ce0e563204723644e2c79e3007c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/376363
Original-Commit-Queue: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16702
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Kconfig hex values don't need to be in quotes, and should start with
'0x'. If the default value isn't set this way, Kconfig will add the
0x to the start, and the entry can be added unnecessarily to the
defconfig since it's "different" than what was set by the default.
A check for this has been added to the Kconfig lint tool.
Change-Id: I86f37340682771700011b6285e4b4af41b7e9968
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16834
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ia9c1c065f20bf2b37afc7485ef8df3abd35e2f14
Reviewed-on: https://review.coreboot.org/16607
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The microcode for the BSP gets loaded early from the fit table, but in
case we have newer microcode in cbfs, try to load it again from cbfs.
BUG=chrome-os-partner:53013
TEST=Boot and verify that microcode tries to load into the BSP.
Change-Id: Ifd6c78d7b0eec333b79e0fe5cb6a81981b078f5d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16829
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A copy of our uart8250io driver sneaked in with Broadwell-DE support.
The only difference is the lack of initialization (due to FSP handling
that).
TEST=manually compared resulting object files
Change-Id: I09be10b76c76c1306ad2c8db8fb07794dde1b0f2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/16786
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Fix the build issues with FSP 2.0:
* Remove struct from the various data structures.
* Properly display the serial port UPDs.
* Change chipset_handle_reset parameter type
BRANCH=none
BUG=None
TEST=Build FSP 2.0 (SEC/PEI core with all FSP debug off) and run on
Galileo Gen2
Change-Id: Icae578855006f18e7e5aa18d2fd196d300d0c658
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16808
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add support for multiple versions of FSP.
BRANCH=none
BUG=None
TEST=Build FSP 1.1 (SEC/PEI core, with all FSP debug off) and run on
Galileo Gen2
Change-Id: Ie7e7f0f883c4d3bfcb18fa25571e505cdde00b2d
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16807
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Kconfig values to select the FSP setup:
* FSP version: 1.1 or 2.0
* Implementation: Subroutine or SEC/PEI core based
* Build type: DEBUG or RELEASE
* Enable all debugging for FSP
* Remove USE_FSP1_1 and USE_FSP2_0
Look for include files in vendorcode/intel/fsp/fsp???/quark
BRANCH=none
BUG=None
TEST=Build FSP 1.1 (subroutine) and run on Galileo Gen2
Change-Id: I3a6cb571021611820263a8cbfe83e69278f50a21
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16806
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
A dedicated pmc_ipc DSDT entry is required for pmc_ipc kernel driver.
The ACPI mode entry includes resources for PMC_IPC1, SRAM, ACPI IO and
Punit Mailbox.
BRANCH=None
BUG=chrome-os-partner:57364
TEST=Boot up into OS successfully and check with dmesg to see the
driver has been loaded successfully without errors.
Change-Id: I3f60999ab90962c4ea0a444812e4a7dcce1da5b6
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/16649
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Intel telemetry support will require PMC IPC1 and SRAM devices to be
operated in ACPI mode. Then using fixed resources on BAR0, BAR1
and BAR2 (PMC only) for those two devices will help
the resource assignment in DSDT stage.
BUG=chrome-os-partner:57364
BRANCH=None
TEST=Boot up into Chrome OS successfully and check with dmesg to see
the driver has been loaded successfully without errors.
Change-Id: I8f0983a90728b9148a124ae3443ec29cd7b344ce
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/16648
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of having each mainboard provide the power button,
uncondtionally provide the power button ACPI device on behalf
of each mainboard.
BUG=chrome-os-partner:56677
Change-Id: I94c9e0353c8d829136f0d52a356286c6bedcddd5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16731
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Initialize the PCNT variable in GNVS so it is available to ACPI code
that expects to know the number of CPUs.
Change-Id: I7a6e003ac94218061bf98e8883ed2c62d856af8d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16693
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch corrects the comment section in gpio.asl for
GPE method.
Change-Id: I45771a295ee1eda00b9699f42cddd120223ff7bf
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/16647
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Implement the generic acpi_get_gpe() function to read and clear
the GPE status for a specific GPE.
Tested by watching GPE status in a loop while generating interrupts
manually from the EC console.
BUG=chrome-os-partner:53336
Change-Id: I482ff52051a48441333b573f1cd0fa7f7579a6ab
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16671
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Initialize the GPEs from mainboard config in bootblock, so they
can be used in verstage to query latched interrupt status.
I still left it called in ramstage just to be sure that the
configuration was not overwritten in FSP stages.
Tested by reading and reporting GPE status in a loop in verstage
and manually triggering an interrupt on EC console.
BUG=chrome-os-partner:53336
Change-Id: Iacd0483e4b3229aca602bb5bb40586eedf35a6ea
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16670
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These values are found in util/cbfstool/cbfs.h.
Change-Id: Iea4807b272c0309ac3283e5a3f5e135da6c5eb66
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16646
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The SPI driver is quite slow at reading data. For example, with a 24MHz
clock on gru it achieves a read speed of only 13.9Mbps.
We can correct this by reading the status registers once, then reading as
many bytes as are available before checking the status registers again. It
seems likely that a status register read requires synchronizing with the
SPI FIFO clock domain, which takes a while.
BUG=chrome-os-partner:56556
BRANCH=none
TEST=run on gru and see the speed increase from 13.920 Mbps to 24.712 Mbps
Change-Id: I24aed0c9c6c5445634c4e056922afaee4e9a7b33
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 49c2fc20d7d7d703763e9b0a6f68313a349a84b9
Original-Change-Id: I42745f01f0fe069f6ae26d866004d36bb257e6b2
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/376945
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16582
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds support to reboot the whole board after a hardware
watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to
Veyron.
From my tests it looks like both SRAM and PMUSRAM get preserved across
warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that
makes it easier to deal with in coreboot (PMUSRAM is currently not
mapped as cached, so we don't need to worry about flushing the results
back before reboot).
BRANCH=None
BUG=chrome-os-partner:56600
TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30
seconds. Confirm that system reboots correctly without entering recovery
and we get a HW watchdog event in the eventlog.
Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098
Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/375562
Original-Commit-Queue: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16578
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This reverts commit 5e3dad66227bba4be9365ee76d00231bb5577b56.
|
|
This reverts commit 3d43a7c111d00be246160a04023fe438ae0cac57.
|
|
Implement the generic acpi_get_gpe() function to read and clear
the GPE status for a specific GPE.
Tested by watching GPE status in a loop while generating interrupts
manually from the EC console.
BUG=chrome-os-partner:53336
Change-Id: Id885e98d48c2133a868da19eca3360e2dfb82e84
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Initialize the GPEs from mainboard config in bootblock, so they
can be used in verstage to query latched interrupt status.
I still left it called in ramstage just to be sure that the
configuration was not overwritten in FSP stages.
Tested by reading and reporting GPE status in a loop in verstage
and manually triggering an interrupt on EC console.
BUG=chrome-os-partner:53336
Change-Id: I1af3e9ac1e5c59b9ebb5c6dd1599309c1f036581
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch sets some magic number in magic undocumented registers that
are rumored to make USB 2.0 signal integrity better on Kevin. I don't
see any difference (unfortunately it doesn't solve the problems with
long cables on my board), but I guess it doesn't hurt either way.
BRANCH=None
BUG=chrome-os-partner:56108,chrome-os-partner:54788
TEST=Booted Kevin with USB connected through Servo. Seems to have
roughly the same failure rate as before.
Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84
Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/370900
Original-Reviewed-by: Guenter Roeck <groeck@chromium.org>
Original-Reviewed-by: David Schneider <dnschneid@chromium.org>
Reviewed-on: https://review.coreboot.org/16265
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add FSP 2.0 support in ramstage.
Populate required Fsp Silicon Init params and configure mainboard
specific GPIOs.
Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for
pre OS screens.
Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16592
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This implements acpi name for PCIe root port.
BUG=chrome-os-partner:56483
Change-Id: Ifec1529c477f554d36f3932b66f62eea782fdcaa
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16621
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In order to ensure bootblock console output shows up in cbmem
console unconditionally select BOOTBLOCK_CONSOLE.
BUG=chrome-os-partner:57513
Change-Id: Ie560dd0e7102c79f6db186a11d6f934505bac116
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16622
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Unconditionally turn on postcar console for apollolake.
BUG=chrome-os-partner:57513
Change-Id: I3d956be4a5834a4721767d34216eebeabef3e315
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16620
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
When the boot media is memory mapped mark it as cacheable
after romstage. Otherwise the boot media is uncacheable and
all loads from it take longer. Loading FSP-S alone in ramstage
went down to 17.5ms from 54ms.
BUG=chrome-os-partner:56656
Change-Id: I6703334ba8fe98aca26ba1c995d6d3abb0ddef33
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16613
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently we are setting the gpio_tier1_sci in smihandler before
going to S3. But this won't work for S0iX as it happens from Linux
kernel and SMI handler is not involved in that flow. We need to
set this bit i.e. bit 15 in ACPI gpe0a register at 0x430h. The Linux
kernel before going to sleep checks what values are passed through
ASL as wake events (through _PRW), keeps those enabled only and
clears other bits in gpe0 enable registers. So we need to inform
the kernel to keep gpio_tier_sci also set as these are needed for
any wake event. This patch adds ASL code for sleep button device with
HID id PNP0C0E. We are adding _PRW method for sleep button device
with this patch.
BUG=chrome-os-partner:56483
TEST=System resumes from S3 on lidopen, powerbutton and USB wake.
Also from S0iX system is resuming for WIFI wake.
Change-Id: Ie8517cad9cd37c25788c22250894d4f9db344ff9
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/16564
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
move lb_framebuffer function in soc/intel/apollolake
to driver/intel/fsp20 so that fsp 2.0 bases soc's can
use common lb_framebuffer function.
Change-Id: If11bc7faa378a39cf7d4487f9095465a4df84853
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16549
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Populate SoC related Memory initialization params.
Post memory init, set DISB, setup stack and MTRRs using the postcar
funtions provided in postcar_loader.c.
TEST=Build and boot kunimitsu, dram initialization done.
ramstage is loaded.
Change-Id: I8d943e29b6e118986189166d92c7891ab6642193
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16315
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It is very useful to have the ability to see I2C transactions
performed by the host firmware. This patch adds a simple
Kconfig option that will enable debug output.
Change-Id: I55f1ff273290e2f4fbfaea56091b2df3fc49fe61
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16590
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change modifies the lpss_i2c driver to behave more like
the Linux kernel driver. In particular the controller is only
enabled when processing a transaction, and is disabled after.
This means that errors in one transaction will not affect later
transactions.
Also when disabling the controller the code is supposed to wait
on the enable bit in the "enable status" register and not in
the enable control register. In order to get access to this
register the reg map was expanded to include all registers.
This was tested with the cr50 TPM driver to ensure that if a
transaction does fail that it can be successfully retried instead
of the bus being unusable.
Change-Id: I43a546d54996ba0f08550a801927b8f7a6690cda
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16589
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Due to an incorrect value set for the power limit PL1, the
system is not able to leverage full TDP capacity. FSP code
sets the PL1 value as 6W in RAPL MMIO register based on
fused soc tdp value. This RAPL MMIO register is a physically
separate instance from RAPL MSR register. This patch sets
PL1 value to 15W in RAPL MMIO register.
BUG=chrome-os-partner:56524
TEST=Built, booted on reef and verifed the package power
with heavy workload.
Change-Id: Ib344247cd8d98ccce7c403e778cd87c13f168ce0
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/16595
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This implements GNVS variable to store the address of PERST_0,
_ON/_OFF methods to power gate PCIe during S0ix entry, and
PERST_0 assertion/de-assertion methods.
BUG=chrome-os-partner:55877
TEST=Suspend and resume using 'echo freeze > /sys/power/state'.
System should resume with PCIE and wifi functional.
Change-Id: I9f63ca0b8a6565b6d21deaa6d3dfa34678714c19
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16351
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The code was not previously initializing the GNVS structure
to all 0's in the ACPI write tables path. Fix this and also
rearrange the ordering of updating the fields to only handle
the chip_info specific bits till last such that most of the
structure is filled in prior to bailing out in the case of a
bad devicetree.
Change-Id: I7bdb305c6b87dac96af35b0c3b7524a17ce53962
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16597
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This driver is only a prototype driver, real driver
will be integrated at a later time.
Testing: booted successfully.
Change-Id: I372764962e96e5c9c827d524bc369978c5c1fda8
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/16554
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: I003f6929b00476d46be931773cd35418fe6622a6
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15529
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: Ie9c9297f321c838f86e5536aab29f67a0eeb053d
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15519
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This driver uses BootROM callback to read and write
to the nvm using I2C.
Testing: booted successfully.
Change-Id: I8639af3e004f6631d7e596507c106159835f979f
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/16161
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
A2BUS is a custom fabric.
Testing: booted successfully.
Change-Id: If6e61f5aa30217eb601ac460d9306166b8433569
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15523
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: I168206585f403d2259efe424e563982be661df0b
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/16149
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
APMU is the AP power management unit.
It is a separate processor that handles enabling
individual power rails.
This driver handles sending and receiving commands
from/to APMU.
Testing: booted successfully.
Change-Id: I5ae07849f8432bece8a0ae9066a3f786e6e8d2fe
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15518
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Load_validate: it loads and validates images from
flash using hash values stored in the BDB.
Testing: booted successfully.
Change-Id: I0b00e8c60ed76622d03cb232d5c4273b4077aae7
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/16148
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: Iaeff9f01dbfad7f313aa237e8c71c36c4ed1e06f
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15509
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: I89dee1bbf8b68460897f64bf673b328533e70cd4
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15508
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Most things still need to be filled in, but this will allow
us to build boards which use this SOC.
Nvidia Tegra210 SOC and Rochchip Rk3399 SOC has been used
as templates to create this directory.
Change-Id: I8cc3e99df915bb289a2f3539db103cd6be90a0b2
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15506
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The serial IRQ (SERIRQ) used by the LPC interface can operate either in
continuous or in quiet mode. Add a Kconfig switch to select the desired
mode. This switch can now be used on mainboard level to enable the
needed mode per mainboard.
Change-Id: Ibe246b88164a622f9c71ebe7bab752a083a49a62
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16575
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since this mainboard provides 4 COM ports on LPC, enable decoding of
the corresponding addresses using the generic LPC decode registers.
Change-Id: I0e93d40dca01d55f3567a18c7ec02269e3bec466
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16535
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The serial IRQ configuration register is only 8 bit wide so switch the
PCI access from 16 bits to 8 bits.
Change-Id: Ia9fbc02251e00b31440bf103e2afc2ff285b7f2e
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16534
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Provide iosf and GPIO functions for GPIO address
calculation.
BUG=chrome-os-partner:55877
Change-Id: I6eaa1fcecf5970b365e3418541c75b9866959f7e
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16349
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For an unknown reason the printed address in the SPI debug messages is
modified before it is printed by subtracting the constant 0xf020 from
the passed in address.
What I suppose this debug code should do is to print the used register
address within the SPI controller while any parts of this address that
belongs to the SPI base address should be omitted. To fix that remove
the subtraction of 0xf020 and adjust the address mask to 0x3ff so that
only the offset to the registers inside the SPI controller will be
visible in the debug messages.
In addition switch to uint8_t and friends over u8 to sync up with used
types in this file.
Change-Id: I93ba7119873115c7abc80a214cc30363a6930b3b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16500
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
DIV_ROUND_CLOSEST and DIV_ROUND_UP are useful macros for other
architectures. This patch moves them from soc/nvidia/tegra/types.h
to commonlib/include/commonlib/helpers.h .
Change-Id: I54521d9b197934cef8e352f9a5c4823015d85f01
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16415
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=chrome-os-partner:56034
Change-Id: Id88d262b32dea468536575117fc34d52076a3096
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/16423
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use the config switch CONFIG_DEBUG_SPI_FLASH on compiler level rather
then on preprocessor level to ensure that the code is compiled even if
the switch is not selected. In addition the following two changes are
introduced:
1. Prepend the debug messages with 'SPI:' to make the output more
meaningful.
2. Change the address mask from 0xffff to 0x3ff and remove the subtraction
of the constant value 0xf020 in order to print only the register
offset within the SPI controller and avoid the visibility of any
fragments from SPI base address.
3. Switch to uint8_t and friends instead of u8 to sync up with other
code in the same file.
Change-Id: Iaf46f29a775039007a402fe862839df06a4cbfaa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16499
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The pull up for CLKRUN is required to resolve keyboard slowness
and malfunctioning observed on some reef systems. The CLKRUN
signal was probed and found to be floating when the pull up
was not enabled. Also Added pull ups for the LPC Multiplexed
command, address and data lines LAD0:3 because the LPC
Interface specification requires them.
BUG=chrome-os-partner:55586
BRANCH=none
TEST=When a key is pressed, the character is immediately visible
on the screen. Also the interrupt count for i8042 increments
immediately in /proc/interrupts.
Change-Id: I16df1a0301a3994c926a609f61291761219f9e01
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/16426
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Commit 93ef3ff makes the following only print the part number when
the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable
that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so
use it instead of $(MAINBOARD_DIR).
build_complete:: coreboot
printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \
$(CONFIG_MAINBOARD_PART_NUMBER)
Change-Id: I729a583182937db7a926eb75aa28dfb53360046c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/16410
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Increase the default timeout in the LPSS I2C driver to 4ms
from 2ms. During testing with some slower devices I found
that the existing timeout could be too short leading to
transaction failures.
Change-Id: Ied86c7a0aa26d55b31f447c5938803c194d0045e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16392
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
FSP header files should be located in vendorcode, not soc directory.
This patch includes changes any references to the old location to
the new location.
Change-Id: I44270392617418ec1b9dec15ee187863f2503341
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/16310
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The following patch is based off of the UEFI 2.6 patch. The FSP header files
are temporarily staying in soc/intel/apollolake and FspUpd.h has been relocated
since the other headers expect it to be in the root of an includable directory.
Any struct defines were removed since they are defined in the headers and no
longer need to be explicity declared as struct with the UEFI 2.6 includes.
BUG=chrome-os-partner:54100
BRANCH=none
TEST=confirmed coreboot builds successfully
Change-Id: I10739dca1b6da3f15bd850adf06238f7c51508f7
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>#
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/16308
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
All but ga-g41m-es2l/cmos.default had multiple final newlines.
ga-g41m-es2l/cmos.default had no final newline.
Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16361
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Antonello Dettori <dev@dettori.io>
|
|
Instead of using a mix of _N and _NORTH, _NW and _NORTHWEST for GPIO
community names, follow one single convention. This allows for re-using
macros easily.
Change-Id: Icd9cf9ef70d03576d864688cf5d6946124c259c3
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16353
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Before, we calculate the pwm duties for cpu cores and centerlogic by
hand, adding pwm_regulator.c to handle this. The default pwm design
min/max voltage may be different between revs.
With the pwm regulator, this patch changes the little cpu frequency from
600M to 1512M, and raises CPU voltage to 1.2V correspondingly.
This also means we decide to drop the ES1 because it may fail to
bootup with 1.5G ~ 1.2v.
BRANCH=none
BUG=chrome-os-partner:54376,chrome-os-partner:54862
TEST=Bootup on kevin board
Change-Id: Id04c176bddfb9cdf3d25b65736e40249a85f6aa1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: ee4365c787ec523b7ee1028ea100dcfbb331b3a9
Original-Change-Id: Ide75bbd92d1cbb14f934baeec0e38862bc08402b
Original-Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/364410
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16368
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I5b69a8429eb2f7add08bc134d5d2366a1afe6a4f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16343
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ifc47f103492a2cd6c818dfd64be971d34afbe0a4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16324
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Initial pieces of code to support fsp2.0 in skylake keeping
the fsp1.1 flow intact.
The soc/romstage.h and soc/ramstage.h have a reference to
fsp driver includes, so split these header files for
each version of FSP driver.
Add the below files,
car_stage.S:
Add romstage entry point (car_stage_entry).
This calls into romstage_fsp20.c and aslo handles
the car teardown.
romstage_fsp20.c:
Call fsp_memory_init() and also has the callback
for filling memory init parameters.
Also add monotonic_timer.c to verstage.
With this patchset and relevant change in kunimitsu mainboard,
we are able to boot to romstage.
TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1
Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0
Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16267
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The romstage.c is more board related than soc specific, like
setting the pwm regulators, so moving it to mainboard/gru.
BRANCH=none
BUG=chrome-os-partner:54819
TEST=Bootup on kevin board
Change-Id: I83c6cde9f451480e47e2b4b549cedf65b345134c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 35feeb07131a6a9de4adde035236987391833474
Original-Change-Id: If2bf245302eb4fb20bb089c1b3ffa03909722443
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/375398
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16367
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Certain LPDDR4 models have some HW issues that can be worked around
by turning off Periodic Retraining feature in the memory controller.
Add option to disable PR per SKU.
BUG=chrome-os-partner:55466
TEST=run RMT test, pass
Change-Id: Ie7aa79586665f6d3a7edd854a9eef07e6a1b2ab8
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/16320
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Update FSP Header files to provide UPD for periodic training
disable. This is for the SIC 1.1.3/150_11 FSP release.
BUG=chrome-os-partner:54100
BRANCH=none
TEST=built coreboot image with new headers for reef
Change-Id: I2ba11aa3d2d664c1d34e39c4c8144fb1c4f2149a
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/16352
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Expose get_microcode_info in cpu initialization. Microcode
revision is retrieved and stored into log file at verstage.
BUG=chrome-os-partner:56544
BRANCH=None
TEST=Built coreboot image and validate log file
Change-Id: I1e792e70f1318df64b4b85a319700013f3757952
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/16311
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently boards based on fsp_broadwell_de fail to compile if the config
switch CONFIG_DEBUG_SPI_FLASH is selected. The error is caused by the
usage of const for the address pointer in the functions writeb_, writew_
and writel_. The reason why it stayed hidden for so long is the fact that
the switch is used with the preprocessor and nobody really selects it
until there is a bug one want to find in this area.
This patch fixes the parameter type definition which solves the error.
In addition the config switch is not used on preprocessor level anymore
but instead on compiler level. This ensures that at least the code
syntax is checked on build time even if the config option is not
selected. Also prefix the messages with "SPI:" to make them more
meaningful in a full log.
Change-Id: I3514b0d4c08bf5a4740f2632641e09af1b3aaf3a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16347
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Kabylake specific Graphics IDs in report_platform.c and igd.c.
BUG=none
BRANCH=none
TEST=Built and boot kunimitsu
Change-Id: I3b810d0ff51eb51d396b783e282779aefb2dcb8c
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16329
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to provide time for the S0 rails to discharge one needs
to be able to set the SLP_S3_L assertion width. The hardware default
is 60 microcseconds which is not slow enough on most boards. Therefore
provide a devicetree option for the mainboard to set accordingly
for its needs. An unset value in devicetree results in a conservative
2 second SLP_S3_L duration.
BUG=chrome-os-partner:56581
Change-Id: I6c6df2f7a181746708ab7897249ae82109c55f50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16326
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Add new option to set up Cache-As-RAM by using CQOS, Cache Quality of
Service. CQOS allows setting ways of cache in no-fill mode, while keeping
other ways in regular evicting mode. This effectively allows using CAR
and cache simultaneously.
BUG=chrome-os-partner:51959
TEST=switch from NEM to CQOS and back, boot
Change-Id: Ic7f9899918f94a5788b02a4fbd2f5d5ba9aaf91d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15455
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Update link addresses for romstage and verstage. Also update FSP-M relocation
address.
BUG=chrome-os-partner:51959
Change-Id: Ia51a341f05b33151ea5fda9f8620408b5a15bc19
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15454
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since whole L2 (1MiB) is not used, it is possible to shrink CAR size
to 768 KiB. Since 768 KiB is not power of two, 2 MTRRs are used to
set it up. This is a part of CQOS enabling.
BUG=chrome-os-partner:51959
Change-Id: I56326a1790df202a0e428e092dd90286c58763c5
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15453
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I89bc8b26f2dba4770aea14b8bbc7e657355e8c59
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16325
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since we now have so much more room for activities in our romstage SRAM
section, we can easily fit the LZMA decompressor to enable ramstage
compression. Also shuffle around memlayout sections a little more to
make use of unused space, and balance out leftover memory so that all
sections that might need future expansion have a reasonable amount.
Change-Id: I47f2d03e520fc3103ef04257b4ba7e93874b8956
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16334
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch changes Gru SDRAM parameters from structures that just get
compiled into the romstage to individual CBFS files. This allows us to
only load the parameter set we need for the board we're booting from
flash, which reduces our boot time and the SRAM memory footprint
required to hold the romstage.
TEST=Booted Kevin.
Change-Id: Ie88a515cbdb19a794ca0a230a56bcc82bed1e550
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16274
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add in the base for ELOG for APL. Some PM events still need to be
added but the basic events are logged here. This enables the
basic functionality of ELOG for Apollolake.
BUG=chrome-os-partner:55473
BRANCH=none
TEST=Verified image boots on Amenia
Change-Id: I8682293e5a55b3efb5fdd9f1be1f3e4bf8d0757c
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/15937
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Call power management utility function clear_wake_sts
from southbridge_smi_sleep before going to sleep.
This is needed to clear the wake status bits in ACPI
registers GPE0.
BUG=chrome-os-partner:55583
BRANCH=None
TEST=Verified that system goes to sleep on lidclose and
powerd_dbus_suspend command issued from built-in
keyboard.
Change-Id: I204a59f8a19137d6a192ea2d89939eefcd5d41ce
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/16299
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch adds a power management utility function to
clear wake status bits in ACPI GPE0 registers. We need
to call this function before going to sleep from
common smi handler function.
BUG=chrome-os-partner:55583
BRANCH=None
TEST=Verified that system goes to sleep on lidclose and
powerd_dbus_suspend command issued from built-in
keyboard.
Change-Id: Icd095d377c82f2e154f2e2db773f737aa49cda64
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/16298
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When UART_DEBUG is enabled bootblock size grows more than the current
32K. Bump this up to 48K.
Change-Id: I580137dfdc9b4ad226c866f2b23b159bd820c62c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16317
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The chromium tree is currently using a different config for
Chrome OS than what is being built in coreboot.org. Align those
settings to reflect how skylake Chrome OS boards are actually
shipped to provide proper parity between coreboot.org and chromium.
Change-Id: I7ab9c1dfa8c6be03ac2125fb06cb7022f3befa97
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16313
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Implement PS0 and PS3 methods to support eMMC power gate
in S0ix suspend and resume.
BUG=chrome-os-partner:53876
TEST=Suspend and Resume using 'echo freeze > /sys/power/state'.
System should resume from S0ix.
Change-Id: Ia974e9ed67ee520d16f6d6a60294bc62a120fd76
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16233
Tested-by: build bot (Jenkins)
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Update the config variable that gets set to use DMIC 2 channel blob for
intel/apollolake platforms. This flag is set in mainboard.
Change-Id: Ic6deb9f08d345cc45351d61a7597bc7075ee20f9
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/16251
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Calling halt in poweroff when in SMM prevents SLP_SMI to be triggered
preventing the system from entering sleep state. Fix this by calling
halt only if ENV_SMM is not true.
BUG=chrome-os-partner:56395
Change-Id: I3addc1ea065346fbc5dbec9d1ad49bbd0ae05696
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16259
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Calling halt in poweroff when in SMM prevents SLP_SMI to be triggered
preventing the system from entering sleep state. Fix this by calling
halt only if ENV_SMM is not true.
BUG=chrome-os-partner:56395
BRANCH=None
TEST=Verified lidclose behavior on reef.
Change-Id: If116c8f4e867543abdc2ff235457c167b5073767
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16257
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
sts_index is calculated incorrectly because of wrong use of
parenthesis. This lead to wrong bit being checked for EC_SMI_GPI on reef
and lidclose event was missed.
BUG=chrome-os-partner:56395
BRANCH=None
TEST=Verified that lidclose event is seen and handled by SMM in
coreboot on reef.
Change-Id: I56be4aaf30e2d6712fc597b941206ca59ffaa915
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16256
Tested-by: build bot (Jenkins)
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Read FSP produced memory HOB and use it to populate DIMM info.
DIMM 'part_num' info is stored statically based on memory/SKU id.
BUG=chrome-os-partner:55505
TEST='dmidecode -t 17' and 'mosys -k memory spd print all'
Change-Id: Ifcbb3329fd4414bba90eb584e065b1cb7f120e73
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/16246
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We should be running faster. Faster = better.
BRANCH=None
BUG=chrome-os-partner:54873
TEST=Boot; stressapptest -M 1028 -s 10000
Change-Id: I7f855960af3142efb71cf9c15edd1da66084e9d8
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 51bfd2abb1aba839bd0b5b85e9e918f3cc4fd94d
Original-Change-Id: Iec9343763c1a5a5344959b6e8c4dee8079cf8a20
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/362822
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16241
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
If the boot device is SPI flash use the common one in the
early stages. While tweaking the config don't auto select
SPI_FLASH as that is handled automatically by the rest of the
build system.
BUG=chrome-os-partner:56151
Change-Id: Ifd51a80fd008c336233d6e460c354190fcc0ef22
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16202
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
If the boot device is SPI flash use the common one in the
early stages. While tweaking the config don't auto select
SPI_FLASH as that is handled automatically by the rest of the
build system.
BUG=chrome-os-partner:56151
Change-Id: If5e3d06008d5529dd6d7c05d374a81ba172d58fd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16201
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Using malloc() in SPI code is unnecessary as there's only
one SPI device that the SoC support code handles: boot
device. Therefore, use CAR to for the storage to work around
the current limiations of the SPI API which expects one to
return pointers to objects that are writable. Additionally,
include the SPI support code as well as its dependencies in
all the stages.
BUG=chrome-os-partner:56151
Change-Id: I0192ab59f3555deaf6a6878cc31c059c5c2b7d3f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16196
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
|
|
Using malloc() in SPI code is unnecessary as there's only
one SPI device that the SoC support code handles: boot
device. Therefore, use CAR to for the storage to work around
the current limiations of the SPI API which expects one to
return pointers to objects that are writable.
BUG=chrome-os-partner:56151
Change-Id: If4f5484e27d68b2dd1b17a281cf0b760086850a7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16195
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Indicate to the build system that a platform provides support
for a writable boot device. The following will provide the
necessary support:
COMMON_CBFS_SPI_WRAPPER users
soc/intel/apollolake
soc/intel/baytrail
soc/intel/braswell
soc/intel/broadwell
soc/intel/skylake
The SPI_FLASH option is auto-selected if the platform provides
write supoprt for the boot device and SPI flash is the boot
device.
Other platforms may provide similar support, but they do that
in a device specific manner such as selecting SPI_FLASH
explicitly. This provides clearance against build failures
where chipsets don't provide SPI API implementations even
though the platform may use a SPI flash to boot.
BUG=chrome-os-partner:56151
Change-Id: If78160f231c8312a313f9b9753607d044345d274
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16211
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|