| Age | Commit message (Collapse) | Author |
|---|
|
The dramc_param module simplifies the communication between coreboot and
MTK DRAM full calibration blob, and is shared by both implementations to
ensure the same format of parameters.
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I4cfd634da1855a76706aab0b050197251e2ed4dd
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Since we always write to &ch[chn].ao.dummy_rd after calling
dramc_engine2_end(), this write could be merged into dramc_engine2_end()
to simplify code.
BUG=none
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: Ibb4bd5ed016118811ad2097098417c19f00f4263
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35749
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Devices behind LPC can expose more buses (e.g. I2C on a super-i/o).
So we should scan buses on LPC devices, too.
Change-Id: I0eb005e41b9168fffc344ee8e666d43b605a30ba
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29474
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
scan_usb_bus() and root_dev_scan_bus() had the very same implementation.
So rename the latter to scan_static_bus() and use that for both cases.
Change-Id: If0aba9c690b23e3716f2d47ff7a8c3e8f6d82679
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31901
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The new name should reflect better what this function does, as that
is only one specific step of the scanning.
Change-Id: I9c9dc437b6117112bb28550855a2c38044dfbfa5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31900
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: I1a8675a4e613a8efc135b05cde36f166acaa7ed4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The code is compiled on SKL/KBL, but the P2SB PCI IDs were missing.
Add them to make sure that the BAR0 doesn't change when running PCI
resource allocation.
Change-Id: I7cffbbc7d15dad14cccd122a081099b51dc1ce07
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I02c08b847fa1523e3296bdf9e3db5a7a322df72e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: Id78e594ae6490d39df76317f8fc3381fe681dd6f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Auto-discoverable PCI devices do not require field .enable_dev
of chip_operations to be set. They are matched with PCI drivers
by the use of PCI vendor and device ID fields.
The name given for the chip_operations struct must match the
pathname the way it is present in the devicetree.cb files. If
there was no match, util/sconfig would currently choose to
use the empty weak declaration it creates in static.c file.
Change-Id: I684a087a1f8ee4e1a5fd83450cd371fcfdbb6847
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
STACK_SIZE value needs to be changed from hex to decimal,
since -Wstack-usage doesn't recognize hexadecimal numbers anymore.
Change-Id: I73606d347194af5de5882a3387a4a5db17f9d94b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35593
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some VR parameter values for KBL-U with GT3 graphics are different from
values for other CPUs in this series [1]. However, GT3 iGPU will never
be detected, since the igd_id variable is compared with the LPC device
PCI ID. The patch fixes this bug.
[1] page 109, 7th Generation Intel(R) Processor Families for U/Y
Platforms and 8th Generation Intel(R) Processor Family for U Quad
Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019.
Document Number: 334661-006
Change-Id: I33527d90550a1de78c9375d3d3b0e046787a559b
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
According to the documentation[1], the Loadline in the unslased GT VR
domain should be 2 mOhms for KBL-U (2 Core, GT3 + OPC).
[1] page 109, 7th Generation Intel(R) Processor Families for U/Y
Platforms and 8th Generation Intel(R) Processor Family for U Quad
Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019.
Document Number: 334661-006
Change-Id: I433036e76d456a725ab27cf57c9bc2fe01a7ace1
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35781
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adds missing Intel HD/Iris iGPU PCI IDs for Kaby Lake processors and
updates the platform report for these devices.
These changes are in accordance with the documentation:
[*] page 10, Intel(R) Open Source HD Graphics and Intel Iris(TM) Plus
Graphics for the 2016 - 2017 Intel Core(TM) Processors, Celeron(TM)
Processors, and Pentium(TM) Processors based on the "Kaby Lake"
Platform. Programmer's Reference Manual. Volume 4: Configurations.
January 2017, Revision 1.0
Doc Ref # IHD-OS-KBL-Vol 4-1.17
[*] Linux kernel sources: include/drm/i915_pciids.h
Change-Id: I1cd1e4ab82f756141f8f13edf1c17f726166dffb
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Adds missing Intel HD/Iris iGPU PCI IDs for Skylake processors
These changes are in accordance with the documentation:
[*] page 11-12, Intel(R) Open Source HD Graphics, Intel Iris(TM)
Graphics, and Intel Iris(TM) Pro Graphics, Programmer's Reference
Manual. Volume 4: Configurations. May 2016, Revision 1.0
Doc Ref # IHD-OS-SKL-Vol 4-05.16
Change-Id: I0ba6e58ec3916dceea00519ac5a51503573e8935
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35493
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the DC Current Specifications [1], the current limit for
the graphical VR domain (Iccmax_gt) isn't same for different Kaby Lake S
CPUs. This value should depend on the iGPU model and processor TDP:
+---------------------+-----+------------+
| Segment | TDP | Icc_max GT |
+---------------------+-----+------------+
| Dual Core GT2/GT1 | 35W | |
| Dual Core GT2 | 51W | 48 A |
| Dual Core GT1 | 54W | |
+---------------------+-----+------------+
| Quad Core GT2 | 35W | 35 A |
+---------------------+-----+------------+
| Quad Core GT2 | 65W | 45 A |
| Quad Core GT2 K-SKU | 91W | |
+---------------------+-----+------------+
This patch adds the remaining Iccmax_gt current limit values from the
documentation [1].
[1] 7th Generation Intel(R) Processor Families for S Platforms and
Intel(R) Core(TM) X-Series Processor Family Datasheet, Volume 1,
December 2018, Document Number: 335195-003
Change-Id: I19766e4f8fab6b48565b65ed4cf13efbc213e654
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add defines to have some more readable code for devcietree.cb.
BUG=N/A
TEST=4K HDMI monitor and LCD working fine on Facebook FBG-1701
Change-Id: Ifc1a7657a528d1fc570dd16df66b078e37e014cb
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
These were unused and somewhat cryptic, assumed purpose was to store
pre-CBMEM timestamps in various PCI config space locations.
Change-Id: I074294446501d49a9bd3c823a2a794c33f443168
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35731
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: Ice1062d10b793dcbeb5b2ce9e2788fd3b6b6250b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When creating the IRQ routing, referenced device and
function number are always of the same PCI device.
Change-Id: Ifc4795245187f8d70650242a56e6ce771ef2167a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35735
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I953e9a7746232b4c40deca55eb6cb3bd7af91496
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The function does not otherwise need dev.
Change-Id: I75d3283b537151258ed48f7e4e0991dff53a803c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35670
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The previously provided device path made no difference, all
integrated PCI devices point back to the same chip_info
structure.
Change reduces the exposure of various SA_DEVFN_xx and
PCH_DEVFN_xx from (ugly) soc/pci_devs.h.
Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Two fields of struct sdram_params are renamed for future CL of DRAM full
calibration. Field 'impedance' is also removed.
BUG=none
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I2f9673fd5ea2e62ee971f0d81bdd12aaf565e31c
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35738
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the the FSP Parameter PchHdaVcType a devicetree setting and make
use of it in the devicetrees of all boards that currently set it.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
Because vcore is the power of ddrphy in the soc, DRAM DVFS needs to be
calibrated with different vcore voltages to get correct parameters.
A new API is added to allow changing vcore voltage.
BUG=b:80501386
BRANCH=none
TEST=measure vcore voltage with multimeter
Change-Id: Ic43d5efe7e597121775dc853a3e2a08ebc59657d
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33391
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a PCI standard register, no need to alias its
definitions under different names.
Change-Id: Iea6b198dd70fe1e49b5dc0824dba62628dedc69a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Apparently romcc-bootblock just barely built without
XMM registers.
Change-Id: Ie7b1101f47c2dfb718bef99f8c05f9d575c821cd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The new macro name contains the number of cores:
PCI_DEVICE_ID_INTEL_SKL_ID_H_4 - 4 core
PCI_DEVICE_ID_INTEL_SKL_ID_H_2 - 2 core
Change-Id: I190181b213d55865aa577ae5baff179fef95afde
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35302
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To support mt8183 power saving during suspend to RAM, this patch loads
SPM firmware to support SPM suspend. SPM needs its own firmware to do
these power saving in the right timing under correct conditions. After
linux PM suspends, SPM is able to turn off power for the last CPU and do
more power saving for the SoC such as DRAM self-refresh mode and turning
off 26M crystal.
BUG=none
BRANCH=none
TEST=suspend/resume passes for LPDDR4 3200
Change-Id: I3393a772f025b0912a5a25a63a87512454fbc86e
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Make sure to match devices on the root bus only. This fixes an issue
where the SoC returned "MCHC" as ACPI name for devices behind bridge
devices, as the DEVFN matched.
Fixes observed "ACPI exception: AE_NOT_FOUND" in dmesg, as the ACPI
path no longer contains invalid names.
Tested on Supermicro X11SSH-TF.
Change-Id: I6eca37a1792287502a46a90144f2f0d8e12ae5d4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change in ssus_disable_internal_pull() is for romcc
compatibility.
Change-Id: Ib72a669a3b5cd90e74d917f74f35453a85941658
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
If VBOOT is used on a mainboard based on fsp_broadwell_de then VBOOT
needs to be able to write to its NV data which may be stored on the SPI
flash. Enable write access to the SPI flash on SoC level. If the
mainboard does not use VBOOT the linker will drop the extra code. The
benefit is that this code is at least compiled and therefore build
tested with fsp_broadwell_de.
Change-Id: I90a2d30f5749c75df2b286dce6779f10dde62632
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
It is safe to assume this to be copy-paste from eg. i945
where registers of said PCI device were read.
Change-Id: I387b7fd6caf317543a6438f973d9e1d96e418de3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35668
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The filename chip.h has a special purpose with the generation
of static devicetree, where the configuration structure name matches
the path to the chip.h file. For example, soc/intel/skylake/chip.h
defines struct soc_intel_skylake_config.
The renamed file did not follow this convention and the structure it
defines would conflict with one defined soc/intel/common/chip.h if such
is ever added.
Change-Id: Id3d56bf092c6111d2293136865b053b095e92d6b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All solid state devices have vendor id defined by JEDEC specification JEP106,
which originally allocated only 7 bits for it plus parity. When number of
vendors exploded beyond 126, a banking proposition came maintaining
compatibility with older vendors while allowing for 4 extra bits (16 banks)
through the introduction of the concept "Continuation code", denoted by the
byte value of 0x7f.
Examples:
0xfe, 0x60, 0x18, 0x00, 0x00 => vendor 0xfe of bank o
0x7f, 0x7f, 0xfe, 0x60, 0x18 => vendor 0xfe of bank 2
BUG=b:141535133
TEST=Build and boot grunt.
Change-Id: I16c5df70b8ba65017d1a45c79e90a76d1f78550c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
TEST=just build it
Change-Id: I34aee507b8c322c816f92cfcae177c069c749ed7
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Removed mkhi_hdr structure definition from multiple SOCs, and moved to common.
TEST=Built code for Hatch, apollolake boards.
Change-Id: Ifeba0ed4d98975049179d1b47fb22c06a927dc29
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35545
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add function to hide IIO PCIe root ports.
TEST=On OCP Monolake, hide built-in NIC PCIe root port [0.2.2 and 0.2.3]
and make sure OS does not detect built-in NIC.
Change-Id: I2fcac5b7d9a7a52a2801c010bfccf247f2a44581
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Devices using eMCP may run at a high DRAM frequency (e.g., 3600Mbps)
while those with discrete DRAM can only run at 3200Mbps. This patch
enables 3600Mbps for eMCP DDR for better system performance.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly and stress test passes on Kukui
Change-Id: Iab6a9c2c390feeb9497b051a255b29566909e656
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Change-Id: I5bd95b3580adc0f4cffa667f8979b7cf08925720
Signed-off-by: Michael Niewöhner <michael.niewoehner@8com.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Change-Id: I189eb8ffce2f0735ad9ba603b1d96786aa00fafb
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Currently "DIMM numbers" increase monotonically for all the channels. However,
commonly DIMMS are numerated on per-channel basis. This change makes numeration
match the convention.
TEST=on OCP monolake, run dmidecode tool and see that "Locator" field matches
expectation.
Change-Id: I3e7858545471867a0210e1b9ef646529b8e2a31c
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35318
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the new SPI code from common folder, delete spi.c. SPI related macros
must be single defined, in southbridge.h if they are used by files other
than the common SPI code, fch_spi.h if they are only used by the common
SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h,
because it can change between SOC.
BUG=b:136595978
TEST=None, code already tested with grunt.
Change-Id: I68008ce076d348adbdabf7b49cec8783dd7134b4
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Use the new SPI code from common folder, delete spi.c. SPI related macros
must be single defined, in southbridge.h if they are used by files other
than the common SPI code, fch_spi.h if they are only used by the common
SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h,
because it can change between SOC.
BUG=b:136595978
TEST=Build and boot grunt using new SPI code, with debug enabled. Check
output.
Change-Id: I639973d993316a10daa7564462e689b2c183f536
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Create a new SPI code that overrides flash operations and uses the SPI
controller within the FCH to its fullest.
Reference: Family 15h models 70h-7Fh BKDG revision 3.06 (public)
BUG=b:136595978
TEST=Build and boot grunt using this code, with debug enabled. Check
output.
Change-Id: Id293fb9b2da84c4206c7a1341b64e83fc0b8d71d
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Add more DRAM frequency bootup to support DRAM frequencies 1600Mbps,
2400Mbps, 3200Mbps and 3600Mbps.
BUG=b:80501386
BRANCH=none
TEST=Memory test passes on eMCP platform
Change-Id: Ic1378ca43fb333c445ca77e7dc0844cdf65f2207
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch implements the dram init setting by replacing the hard-coded
init sequence with a series of functions to support calibration for more
frequencies. These functions are modified from MediaTek's internal DRAM
full calibration source code.
BUG=b:80501386
BRANCH=none
TEST=1. Kukui boots correctly
2. Stress test (/usr/sbin/memtester 500M) passes on Kukui
Change-Id: I756ad37e78cd1384ee0eb97e5e18c5461d73bc7b
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The bus variable doesn't live outside the scope of this function, and is
only used as a convenient way for passing the pointers to all the
sub-functions, so it doesn't need to be allocated. Put it on the stack
instead. A similar fix for ipq806x was done in 0f33d8c29a
(soc/qualcomm/ipq806x: Remove unnecessary allocation).
Change-Id: Ibb1129b92e38a105e100f59e03d107de340b925c
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1294801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Intel's EDS says "1 = GPIO Driver Mode. GPIO input event updates are
limited to GPI_STS. GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS updates
are masked." Therefore, the GPI_GPIO_DRIVER_SCI option for pad
configuration is meaningless, as any GPE will be masked if the GPIO
driver is set as owner.
Change-Id: Ia0cd0041dfc985cbe388cb89a4026038c7fb4383
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35460
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialize the input_hertz and uart_pci_addr fields of the lb_serial
struct to prevent later undefined reads in lb_add_serial(). This was
done for exynos5420 in commit ff94e00362 (soc/samsung/exynos5420/uart.c:
Init new serial struct variables), and this patch finishes the rest.
Note that not all of the drivers can have the UART PCI address
configured at build time, so a follow-up patch will be needed to correct
those ones.
Change-Id: I733bc8185e2f2d28a9823495b53d6b09dce4deb1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1354778
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34548
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Below new functions are added:
* send_hmrfpo_enable_msg() - Sends HMRFPO Enable command to CSE. This
API sets ME in SEC_OVERRIDE mode. The mode prevents CSE to execute SPI I/O
cycles to CSE region, and unlocks the CSE region to perfom updates to it.
* send_hmrfpo_get_status_msg() - Sends HMRFPO Get Status command to CSE
TEST=Verified sending HMRFPO_ENABLE & HMRFPO_GET_STATUS HECI commands on
CML RVP & hatch board
Change-Id: I559bc4641e12df7ed39b1c97097bf068f9a232db
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
send_heci_reset_req_message() is defined in multiple places,
hence move it to common code.
TEST=Verified on CMLRVP/Hatch/Soraka/Bobba/Dragon Egg boards.
Change-Id: I691fc0610356ef1f64ffa7cc4fe7a39b1344cc16
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35228
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set BL31 platform to mt8183 to link with ARM Trusted Firmware.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui with more patches in ATF.
Change-Id: Ia988d2b4ed646027c04c7c6ff0e50ed7a0b14da3
Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This adds SATA parameters for SpinUp, HotPlug and TestMode to the
Skylake FSP 2.0 interface.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I7ba67879b78c2cb0fd0b0ce832140b213edd5884
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35186
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I80c92f744fb9a6c3788b8b9ba779deef76e58943
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33530
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PCO_HDA0 device contains the "ATI" vendor ID 0x1002 and was
incorrectly added to this file. It isn't anticipated that the
device will need special handling, so remove it from the list
of supported IDs.
Change-Id: I306a806dc510e3a4ee3d9c0663306dc93b1d936d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
This patch uprevs the Arm Trusted Firmware submodule to the new upstream
master (commit 42cdeb930).
Arm Trusted Firmware unified a bunch of stuff related to BL31 handoff
parameters across platforms which involved changing a few names around.
This patch syncs coreboot back up with that. They also made header
changes that now allow us to directly include all the headers we need
(in a safer and cleaner way than before), so we can get rid of some
structure definitions that were duplicated. Since the version of entry
point info parameters we have been using has been deprecated in Trusted
Firmware, this patch switches to the new version 2 parameter format.
NOTE: This may or may not stop Cavium from booting with the current
pinned Trusted Firmware blob. Cavium maintainers are still evaluating
whether to fix that later or drop the platform entirely.
Tested on GOOGLE_KEVIN (rk3399).
Change-Id: I0ed32bce5585ce191736f0ff2e5a94a9d2b2cc28
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Guards are required due to different PCI accessor
signatures.
Change-Id: I60e87f16a48565917f6ee9d05cc59d2b9373270c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35381
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I35b44967de4e8d9907dc887fe35407bcaf334adc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35379
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I898188d31fcfd153eb95d0a7324fa9fd85316e3c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
FSP BIOS 212 / 07.00.6C.40 for CNL/WHL supports FSP to use coreboot stack.
This change selects common stack config, that enables coreboot to support
share stack with FSP.
TEST=Boot to OS on WHL platform
Change-Id: I0778ee21cb4f66b8ec884b77788c05a73c609be6
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
Replace the raw register definitions with device numbers and macros
for determining the register offsets. Rewrite the source to refer
to AOAC device numbers instead of a structure.
Remove the calculated offset for the console UART. Picasso's UARTs
are not contiguous so handle them separately.
Change-Id: Iffc87f39ebe38394a56d41bb0940e9701fd05db9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
PchPwrOptEnable FSP UPD is for internal testing and not really available
in externally released FSP source hence assigning this UPD using devicetree
config dmipwroptimize doesn't do anything.
TEST=Build and boot sarien/arcada.
Change-Id: I6da2a088fb697e57d12008fa18bd1764b3da7765
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Change-Id: I01e1e356936b85b186d9bd5f1c1e5e3a1157a30b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33732
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Host FW status 1 (FWSTS1/HFSTS1) register definition is common across SoCs,
hence move it to common. Also add below helper function,
* wait_cse_sec_override_mode() - Polls ME status for "HECI_OP_MODE_SEC_OVERRIDE".
It's a special CSE mode, the mode ensures CSE does not trigger any
spi cycles to CSE region.
* set_host_ready() - Clears reset state from host CSR.
TEST=Verified CSE recover mode on CML RVP & Hatch board
Change-Id: Id5c12b7abdb27c38af74ea6ee568b42ec74bcb3c
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
CML FSP now provides a provision to configure the SATA devslp
GPIO pad reset configuration. This config would help set the
the required pad reset configuration.
BUG=b:133000685
Change-Id: I4eaea9c6da67f1274ad3e392046a68cddc1b99b6
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This patch helps to save additional ~19ms of booting time in
normal boot and s3 resume on CML-hatch.
BUG=b:140008206
TEST=Verified normal boot time on CML-Hatch with latest coreboot
Without this CL:
Total Time: 929ms
With this CL: (TSEG marked as WB)
Total Time: 910ms
For test marked TSEG as WP/WC:
Total Time: ~920ms
Change-Id: Ie92d2c9e50fa299db1cd8c57a6047ea3adaf1452
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35026
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes dedicated function call to make TSEG region cache
from soc and refers to postcar_enable_tseg_cache().
BUG=b:140008206
Change-Id: I18a032b43a2093c8ae86735c119d8dfee40570b1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
For CML & ICL, FSP requires at least heap = 0x10000 and stack = 0x20000.
Refer to FSP integration guide to know the exact FSP requirement.
BUG=b:140268415
TEST=Build and boot CML-Hatch and ICL.
Change-Id: Ic1463181b4a9dca136d00cb2f7e3cce4f7e57bd6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35301
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
me_read_config32() is defined in multiple places, move it to common
location. Also, this function is usually used for reading HFSTS
registers, hence move the HFSTS register definitions to common location.
Also add a funtion to check if the CSE device has been enabled in the
devicetree and it is visible on the bus. This API can be used by
the caller to check before initiating any HECI communication.
TEST=Verified reading HFSTS registers on CML RVP & Hatch board
Change-Id: Icdbfb6b30a007d469b5e018a313c14586addb130
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35225
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Restrict the use of symbol names _car_global_[start|end]
to be used exclusively with CAR_GLOBAL_MIGRATION=y.
They just alias the start and end of .bss section in CAR.
Change-Id: I36c858a4f181516d4c61f9fd1d5005c7d2c06057
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
These have become aliases to _car_global_[start|end].
Change-Id: Ibdcaaafdc0e4c6df4a795474903768230d41680d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Devices using eMCP may run at a high DRAM frequency (e.g., 3600Mbs)
while those with discrete DRAM can only run at 3200Mbps. A new option
MT8183_DRAM_EMCP is added to Kconfig for a mainboard to select,
depending on whether it supports eMCP or not.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I9b73c8b512db5104896ea0d330d56e63eb50a44b
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Tested on Supermicro X11SSH-TF.
Change-Id: I3ebab68ff868c78105bb4b35abffb92f3ccf1705
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Picasso's TimeStamp Counter is a new design and different than
Stoney Ridge. Although advertised as invariant, the ST TSC did
not become so until midway through POST making it an unreliable
source for measuring time. This is not the case for Picasso.
Remove the Stoney Ridge monotonic timer code and rely on the TSC.
Modify the calculation used in Family 15h of finding the number
of boost states first, and get the frequency directly out of the
Pstate0 register.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I909743483309279eb8c3bf68852d6082381f0dff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
It is already trivial to set D14F3x44 to 0, but add a function to wipe
both that and the settings in D14F3x48, along with x48's associated
addresses.
Change-Id: Ibec25562b2a1568681aea7caf86f00094c436a50
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Include the file containing the typedefs for uint_*.
Change-Id: If33765b6dc4236c4b38860bfc4f2cef9b226b81d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Modify intel/fsp_broadwell_de such that timestamp_init() is
before raminit (and CAR teardown of FSP1.0), adding two new
early timestamps while doing so.
Other FSP1.0 platforms fsp_baytrail and fsp_rangeley already
do it this way.
Change-Id: I3b73e4a61622f789a49973a43b21e8028bcb8ca8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35279
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the very early days of FSP 1.0 this did not work so
we kept it disabled.
Change-Id: I8a88be6df335598d4c6007a8b7ff307b293e1f97
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Aggregate sending and receiving HECI messages into a single function.
TEST=Verified sending and receiving reply HECI message on CML RVP & Hatch board
Change-Id: Ic95239eef8591d3aadf56a857c97f3f1e12b16ac
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35224
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables FSP-S SPI lockdown UPDs and lets coreboot perform
SPI lockdown (i.e.flash register DLOCK, FLOCKDN, and WRSDIS before
end of post) in ramstage.
BUG=b:138200201
TEST=FSP debug build suggests those UPDs are disable now.
Change-Id: Id7a6b9859e058b9f1ec1bd45d2c388c02b8ac18c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Decide if HECI1 should be hidden prior to boot to OS.
BUG=none
TEST=Boot to OS, verify if Heci1 is disabled on hatch system
using FSP 1344.
Change-Id: I7c63316c8b04fb101d34064daac5ba4fdc05a63c
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Include the file containing the typedefs for uint_*.
Change-Id: I3eae80a677e9d6932dc115523da2c0819a371fa7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35268
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Include the file containing the typedefs for uint_*.
Change-Id: Ib0eea9bfd0c8d9e3eba257b561980accf5b4bab4
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35267
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds Lewisburg C62x Series PCH support by adding the
Production and Super SKUs of the following PCI devices:
- LPC or eSPI Controllers,
- PCI Express Root Ports,
- SSATA and SATA Controllers,
- SMBus,
- SPI Controller,
- ME/HECI,
- Audio,
- P2SB,
- Power Management Controller.
These changes are in accordance with the documentation:
[*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub
(PCH) Datasheet, May 2019. Document Number: 336067-007US
Change-Id: I7eaf2c1bb725ffed66f86c023c415ad17fe5793d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
|
|
Some USB 3.0 devices fail to be enumerated after USB reset, and xhci
port status register shows the device is disconnected. After measuring
the USB signal, we found that the USB disconnect threshold was lower and
that the disconnect event was triggered unexpectedly.
USB designers suggest changing discth to 15.
BUG=b:122047652
TEST=emerge-kukui coreboot chromeos-bootimage
Change-Id: I0e8556035b49d693a42cbe1099a6882a1c0ed0d1
Signed-off-by: Changqi Hu <changqi.hu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Add printing SPD data for debug usage.
BUG=b:139397313
BRANCH=N/A
TEST=Tested the on Hatch and checked cbmem log.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1e257a8ea6ff9c906267841819d2a4b62a9e0b9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Consider the association between modem[1] and DCXO, this patch is a fix for
eb5e47d("mediatek/mt8183: update dcxo output buffer setting") [2]
We should not disable XO_CEL and block the bblpm request when modem is still ON.
For power-saving, we still could disable unused XO_CEL and
mask request to disable unused power mode when modem is no longer be used.
[1] https://review.coreboot.org/c/coreboot/+/32666
[2] https://review.coreboot.org/c/coreboot/+/32323
BRANCH=none
TEST=Boots correctly on Krane.
Change-Id: I047ebed615e874977ca211aafd52b5551c71b764
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The P2SB PCI device can be "hidden", which causes all sorts of
nightmares and bugs. Moreover, FSP tends to hide it, so finding
a good solution to this problem is impossible with FSP into the mix.
Since the values for IBDF and HBDF were already hardcoded as FSP
parameters, define them as macros and use these values directly to
generate the DRHD.
Change-Id: I7eb20182380b953a1842083e7a3c67919d6971b9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mimoja <coreboot@mimoja.de>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
BUG=b:139798422, b:129839774
TEST=Able to build and boot KBL/CML/ICL.
Change-Id: I341eec13d275504545511904db0acd23ad34e940
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35234
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add fan based active cooling for TSR sensors temperature range.
BUG=b:138966929
BRANCH=None
TEST=Verified Fan control functionality for TSR sensors on Hatch.
Change-Id: I957ae96cf6fa7d2467e73155d64f76a6bd652e31
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
tsc_freq_mhz() had a static table of Intel CPU families and crystal
clock, but it is possible to calculate the crystal clock speed dynamically,
and this is preferred over hardcoded table.
On SKL/KBL/CML CPUID.15h.ecx = nominal core crystal clock = 0 Hz
hence we had to use static table to calculate crystal clock.
Recommendation is to make use of CPUID.16h where crystal clock frequency
was not reported by CPUID.15h to calculate the crystal clock.
BUG=b:139798422, b:129839774
TEST=Able to build and boot KBL/CML/ICL.
Change-Id: If660a4b8d12e54b39252bce62bcc0ffcc967f5da
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35148
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ide10223e7fc37a6c4bfa408234ef3efe1846236a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I09292c2776309982cfb4d72012991bf7725b75fb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32912
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enables Gaussian Mixture Model (GMM) only if the corresponding pci
device is enabled in the device tree
Tested on Asrock H110M DVS motherboard
Change-Id: I21409adf85b70bccc30dd8e12a03ad7921544b3c
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Parentheses are unnecessary for conditions like '(a == b) || (c == d)'.
Change-Id: I0c554bf1577b40286f7a51a8fc5804bdbb7c8bd1
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35142
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Add Kconfig to enable TXT
* Add possibility to add BIOS and SINIT ACMs
* Set default BIOS ACM alignment
* Increase FIT space if TXT is enabled
The following commits depend on the basic Kconfig infrastructure.
Intel TXT isn't supported until all following commits are merged.
Change-Id: I5f0f956d2b7ba43d4e7e0062803c6d8ba569a052
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Increase CBFS and RAMSTAGE size to accommodate larger binary component.
BUG=b:77641795
TEST=Build and test on Gale.
BRANCH=none
Change-Id: I25f7121221ab2bb66dfedbc4a66e06976d88cef5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: e4d3d2d078d0a8f705afe2b6c741118727614bf0
Original-Change-Id: I6ad16c0073a683cb66d5ae8a46b8990f3346f183
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/1366388
Original-Reviewed-by: Zhihong Yu <zhihongyu@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35134
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the documentation, Sunrise PCH-H [1,2] and Lewisburg PCH
[3] supports up to 16 PCIe ports. However, ACPI contains a description
for only 12 ports. This patch adds ACPI code for missing ports
[1] page 182, Intel (R) 100 Series and Intel (R) C230 Series PCH
Family Platform Controller Hub (PCH), Datasheet, Vol 1 of 2,
December 2018, Document Number: 332690-005EN
[2] page 180, Intel (R) 200 Series and Intel (R) Z370 Series PCH
Family Platform Controller Hub (PCH), Datasheet, Vol 1 of 2,
October 2017, Document Number: 335192-003
[3] page 39, Intel(R) C620 Series Chipset Platform Controller Hub
(PCH) Datasheet, May 2019. Document Number: 336067-007US
Change-Id: I954870136e0c8e5ff5d7ff623c7a6432b829abaf
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
