Age | Commit message (Collapse) | Author |
|
Remove CONFIG_...FSP2.0 based if-switches from FSP2.0-only socs/boards
Change-Id: Iae92dc2e2328b14c78ac686aaf326bd68430933b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36279
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow-up commit where only files are moved and paths adapted to make
review of the previous commit easier.
Change-Id: Iff1acbd286c2ba8e6613e866d4e2f893562e8973
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35868
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This drops support for FSP 1.1 in soc/intel/skylake, after all boards
have been migrated to FSP 2.0, which is backwards compatible.
Any moving of files happens in a follow-up commit to make review easier.
Change-Id: I0dd2eab0edfda0545ff94c3908b8574d5ad830bd
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35813
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Change-Id: I09fce1298794f30c1db699438204ac32ee9cb27d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36296
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:143229128
Change-Id: I03aa12b16979dc07869b0d33daedcde4fe84bc27
Signed-off-by: Justin Frodsham <justin.frodsham@amd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36281
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Found-by: ACPICA 20191018
Change-Id: I9f55cc033b5672917520b139444bc614462c4a05
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The SOC DRAM team suggested to delay at least 1us after setting new
voltage in PMIC wrapper so the new value can be effective.
BRANCH=kukui
BUG=b:142358843
TEST=emerge-kukui coreboot
Change-Id: I19d236769c3c0c87513ea4a0a3f64b83e3a844c2
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36254
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found-by: ACPICA 20191018
Change-Id: I81286d89da933b503f605737f28772bfb08483a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36253
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Add macro dramc_err.
- Some log levels are changed.
- Some messages are improved for readability.
BRANCH=kukui
BUG=none
TEST=emerge-kukui coreboot
Change-Id: If0c9e61c0f81a06e9264784f682a6c373574e06b
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35767
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BRANCH=kukui
BUG=none
TEST=emerge-kukui coreboot
Change-Id: I9d01d24d3494f2eb28cfb411e13adf3b6717d191
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36285
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refactor I2C driver for fsp_baytrail to match the coreboot supported I2C
bus device structure. The internal I2C controllers are now handled by
the generic PCI driver approach and generic I2C access is enabled.
As orientation for the I2C code the actual solution from
soc/intel/apollolake I2C was taken. All the I2C specific parts were
removed from lpss.c and have been implemented in the I2C driver.
Future merge to soc/intel/common/block/i2c/i2c.c would be possible.
With this patch I2C chip devices can now be used in devicetree.
TEST=Booted siemens/tcu3 and verified that access to PTN3460 worked.
Change-Id: I3b87bd7c27e4c1afcce7cd4225cca02599f43c60
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
To allow retraining memory without hotkey (for example in manufacturing
process), we want to enforce re-training when the recovery reason is set
to VB2_RECOVERY_TRAIN_AND_REBOOT (which can be done by running
"crossystem recovery_request=0xc4").
The special reason was created for X86 MRC cache, for ensuring RO
calibration data is filled (the underlying implementation was in vboot,
not coreboot); and on MT8183 we have only RW calibration, but it seems
totally fine to extend that for RW.
BRANCH=kukui
BUG=None
TEST=boots; crossystem recovery_reason=0xc4; reboot
Change-Id: Iaa5275f0e0eb90f6ab3a7d4579977a6655d59bd9
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Currently only the PCIe ports 1-12 are checked for a wake event. Add
ELOG wake sources for ports 13-24, if they exist.
Change-Id: Ic96e5101ad57bdecd8cbdb66379bc274ae790e01
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add code for FSP Broadwell DE to set the DPR.
Used by the Intel TXT code.
Tested on Intel Broadwell DE using Intel TXT.
Change-Id: Ib5e1ba8731e5cea1be9319a1fb9658dba841dc7b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Lock AES-NI register to prevent unintended disabling, as suggested by the
MSR datasheet.
Successfully tested by reading the MSR on X11SSM-F
Change-Id: I97a0d3b1b9b0452e929ca07d29c03237b413e521
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35188
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BRANCH=kukui
BUG=none
TEST=emerge-kukui coreboot
Change-Id: Ic2f6bfaf42aed642e1d7d6aba5db373944eb8ef6
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add dphy reset after setting lanes number to avoid dphy fifo error.
BUG=b:139150763
BRANCH=kukui
TEST=Boots correctly on kukui
Change-Id: Ib83576f3700ef98c90f0b4dd101dcaa237d562f9
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
To fix MIPI D-PHY test failure, the hs-prepare should be less than
LimitMin from spec, and we have to enlarge TEOT margin.
BUG=b:138344447
BRANCH=kukui
TEST=Boots correctly on kukui
Change-Id: If91e7a546866299f02432be27fe778be5d7bdc5f
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The previous code actually set SlpS0WithGbeSupport even when GBE is
disabled in device tree and could cause power consumption in s0ix.
This change will config PchPmSlpS0VmRuntimeControl, PchPmSlpS0Vm070VSupport,
PchPmSlpS0Vm075VSupport by device tree.
SlpS0WithGbeSupport will be set only when s0ix and gbe are enabled.
BUG=b:134092071
TEST=Run suspend_stress_test on kohaku and pass 100 cycles
Change-Id: I154a4e6970f99360aeb880d576eb61528034f7b6
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Commit 680027edf6 fixed a null dereference and logic bug in the tegra210
spi code:
soc/nvidia/tegra210: Fix potential NULL pointer dereference
Recent Coverity scan indicated potential NULL deference; if either
spi->dma_in or spi->dma_out are NULL, the fifo_error() check could
dereference a NULL pointer.
Also fixed what appears to be a logic bug for the spi->dma_out case,
where it was using the todo (count) from spi->dma_in.
Coverity is warning about the same problem for tegra124, so apply the
same fix there. Also, add braces around a while statement.
Change-Id: I6a7403417ee83b703cf4ca495129f73c66691ea9
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 124183, 124185
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add a driver that can properly configure the pads needed to run the
correct audio mode. I2S requires the 48M oscillator enabled
regardless of an external connection.
Change-Id: I1137eae91aa28640ca3e9e2b2c58beed2cdb7e3c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Icc/Loadline automatic detection is supported only for FSP2.0
These changes are in accordance with the documentation:
[*] S-Platforms, Document Number: 332687-008EN
[*] H-Platforms, Document Number: 332986-010EN
[*] U/Y-Platforms, Document Number: 332990-008EN
Change-Id: I8e517d8230c251e0cd4b1d4f1b9292c3df80cb19
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I0c965e598e260ff8129aa07fb9fc5bf6e784e1d8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Similar to MRC cache on x86 platforms, when a hotkey is pressed during
boot, the calibration data cache saved in the flash will be cleared,
consequently triggering DRAM retraining (full calibration) in the next
boot.
BRANCH=kukui
BUG=b:139099592
TEST=emerge-kukui coreboot
Change-Id: I2f9225f359e1fe5733e8e1c48b396aaeeb9a58ab
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
SoC DRAM team suggested always running full calibration mode in recovery
mode because it is possible to get unstable memory even if the complex
memory test has been passed.
Since the recovery mode runs from RO and we only have training data
cache for RW, the trained calibration data can't be saved since RO and
RW may be running different firmware.
Also revised few message to make it more clear for what calibration mode
(fast, full, or partial) has been executed.
BRANCH=kukui
BUG=b:139099592
TEST=emerge-kukui coreboot
Change-Id: I29e0df71dc3357462e15ce8fc2ba02f21b54ed33
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This reverts commit d5018a8f78b9e1f0b7d3d1be298cba9716b10c6c.
Reason for revert: Breaks boot on Whiskey Lake-U boards
Both System76 and Purism have had memory initialization failures
when this patch is applied, with the following error message:
Failed to accommodate FSP reserved memory request!
An extra 4096 bytes needs to be reserved for the FSP on these
systems, and reinstating the PTT reservation does this as
expected. PTT is enabled for the System76 galp3-c in the
ME configuration, which is why the behaviour is different.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
CC: Matt DeVillier <matt.devillier@gmail.com>
CC: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ib82f02c4a2b1cd2dbf95d4ca4a9edd314e78edd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35924
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iddcef560c1987486436b73ca1d5fc83cee2f713c
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
An important piece of information contained in the APCB is a copy of
SPD-type data to use for soldered down memory. The amdfwtool has
been updated with the ability to build five APCBs into the PSP's BIOS
Directory Table. Modify Picasso's Kconfig and Makefile.inc to take
advantage of the flexibility, and pass the correct instance ID to
amdfwtool.
Change-Id: I0efa02cb35f187ca85a8f0d8bd574fc438e6dc0a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The current DCACHE_BSP_STACK_SIZE is set to 128KiB for CML & ICL when
FSP uses the same stack provided by coreboot. This patch updates it to
129KiB since the default value of DCACHE_BSP_STACK_SIZE must be
the sum of FSP-M stack requirement (128KiB) and CB romstage
stack requirement (~1KiB).
BUG=b:140268415
TEST=Build and boot CML-Hatch.
Change-Id: Icedff8b42e86dc095fb68deb0b8f80b2667cfeda
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36032
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix a handful of errors that slipped through in 2e0f2788
"soc/amd/picasso: Update GPIO configuration".
Change-Id: I5784ab3cd95abc28fdc80a3815d0a52d955cff26
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36118
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Let the mainboard decide whether to let coreboot load the verb table.
Change-Id: I8f05ac02f690a43ada470916f5292b83aeaa8a4f
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35274
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the driver work with stepping=0.
Change-Id: Id0961369b9cc9cfe1b0c09ebc50e6966ccd2e919
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35273
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2a94c3b6282e9915fd2b8136b124740c8a7b774c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Clarify names as I2C2, etc. Use iomap.h defines for base addresses.
Update IRQs.
Change-Id: I3800592e4b0bcb681d0dcf24f69e269f845be025
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ieedc2062948a0d1563f82e4d0b1ca9c5bc3291a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33991
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a function to uart.c to ensure the right IOMux settings are
programmed for the console UART. Update Kconfig to reflect the
new addresses.
Give the user the ability to downclock the UARTs' refclock to
1.8342MHz.
Add the abiltiy to use an APU UART at a legacy I/O address.
Update the AOAC register configuration for the two additional
UARTs.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I74579674544f0edd2c0e6c4963270b442668e62f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Picasso's Device ID and default filename.
Only a single Device ID is documented for Picasso so remove the oprom
remapper function.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Iaf43d7c8da41beb05b58c494f0a6814f8f571b18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34422
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Picasso's SATA controller operates only in AHCI mode. Remove the
Kconfig symbols previously used to select between other possibilities.
Change-Id: Iaeb8b4a2540e976d2e7361faf8c6d261e60398fd
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
SATA is no longer defined in AOAC so remove its definitions.
Change-Id: Ief0ab6b5f69f2d17c11d8e2ee40941ac56c077f6
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Picasso's FCH has many similarities to Stoney Ridge, so few changes
are necessary. The most notable changes are:
* Update the index values for the C00/C01 interrupt routing
* FORCE_STPCLK_RETRY is not present
* PCIB is not defined
* FCH MISC Registers 0xfed80e00 numbering has changed
* C-state base moves from PM register to MSR
* Add option to determine the intended MUX settion for LPC vs. eMMC
* Remove the LEGACY_FREE option
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I69dfc4a875006639aa330385680d150331840e40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The standard PCI register space for D14F0 is accessible at 0xfed80000.
Add functions for use as helpers.
Change-Id: Icbf5bdc449322c3f5e59e6126d709cb2808591d5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The LPC-ISA bridge supports two ranges for SuperIO control registers.
Add a generic function to allow a mainboard to enable the appropriate
range. Provide #define values that are more descriptive than the
register's field names.
Change-Id: Ic5445cfc137604cb1bb3ee3ea4c3a4ebdb9a9cab
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35271
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change to the appropriate device IDs. Remove the ehci resource
call. Remove overcurrent settings, as this will be passed to
AGESA in later change.
Remove unused USB2 ACPI name assignment.
Change-Id: Ic287a05b30ca03e3371cc4a30aaa93b236c6d3fb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Kconfig options and Makefile command line options to generate
the amdfw.rom image. A new intermediate image is introduced, which
is the initial BIOS image the PSP places into DRAM prior to
releasing the x86 reset. The amd_biospsp.img is a compressed
version of the romstage.elf program pieces.
Additional details of the PSP items are not public information. See
NDA document PID #55758.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ib5e393e74ed60e968959012b6275686167a2d78a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic90dcff9d0b49a75a26556e4a1884a2954ef68f6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36063
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This corrects the LPC/eSPI lock bit from bit 2 to bit 1 in accordance
with doc#332691-003EN and doc#334819-001.
Change-Id: I45335909b1f2b646e4fafedd78cb1aaf7052d60c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The DRAM calibration blob can be compressed using pre-RAM algorithm
(currently LZ4), which will save ~12ms in boot time.
On Kodama, boot time difference:
Before: 1,082,711
After: 1,070,309
BUG=b:139099592,b:117953502
TEST=build and boot, cbfstool coreboot.rom print -v (see dram compressed)
BRANCH=kukui
Change-Id: Ic3bd49d67ee6f80a0e4d8f6945744642611edf64
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
To make data flow more explicit, global variable 'impedance' is replaced
with a local variable, which is passed as a function argument.
BUG=none
BRANCH=kukui
TEST=Krane boots correctly
Change-Id: I0f6dacc33fda013a3476a10d9899821b7297e770
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The patch adds config MT8183_DRAM_DVFS to enable DRAM calibration with
multiple frequencies to support DVFS switch.
BUG=b:80501386,b:142358843
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I97c8e513dc3815a2d62b2904a246a1d8567704a4
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This patch supports voltage adjustment for each DRAM frequency, which is
neccesary to support DVFS switch.
BUG=b:80501386,b:142358843
BRANCH=none
TEST=Boots correctly and stress test pass on Kukui.
Change-Id: I9539473ff708f9d0d39eb17bd3fdcb916265d33e
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
DRAM DVFS needs to be calibrated with different vddq voltages to get
correct parameters.
A new API is added to allow changing vddq voltage.
BUG=b:80501386
BRANCH=none
TEST=measure vddq voltage with multimeter
Change-Id: I5f0d82596a1709bf0d37885f257646133f18f210
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35147
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DRAM DVFS needs to be calibrated with different vdram1 voltages to get
correct parameters.
A new API is added to allow changing vdram1 voltage.
BUG=b:80501386
BRANCH=none
TEST=measure vdram1 voltage with multimeter
Change-Id: Ia15ab3a2e1668e5b4873d317b57a38ebee037709
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33186
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most coreboot debug messages are sent to UART and cbmem console, and we
also want to collect DRAM calibration module output, especially for
cbmem console (so we can see the logs after kernel is up).
Instead of sharing whole cbmem/cbtable/cbmemconsole implementations, we
want to simplify that by a simple function pointer so output can be
preserved by do_putchar, which internally sends data to all registered
consoles (usually cbmem console and UART).
BUG=b:139099592
TEST=make; boots properly for full-k, with and without serial console.
BRANCH=kukui
Change-Id: I1cf16711caf3831e99e17b522b86694524425116
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36056
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The checksum is stored in the header of calibration data and saved to
SPI flash. After reading the data from flash, checksum is used to verify
the integrity of the calibration parameters.
BUG=b:139099592
BRANCH=kukui
TEST=Calibration data successfully loaded from flash
Change-Id: Ie4a0688ed6e560d4c0c6b316f44e52fd10d71a9d
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
In broadcast mode we only need to set registers for channel 0
instead of all channels.
BUG=none
BRANCH=kukui
TEST=emerge-kukui coreboot
Change-Id: I22a4b69fd40d1978fa7b12e8edaba00ce5d7787d
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Some typos are fixed to make DVFS switch work.
BUG=b:142358843
BRANCH=kukui
TEST=emerge-kukui coreboot
Change-Id: I064d4a2c46187ac5780352da742bd56e82c22c14
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Replace the magic clrsetbits_le32, read32, write32 by SET_BITFIELDS and
other bit field helpers.
Change-Id: I327297dd10718fbef7275fe95c95d00d3ab6ac84
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35471
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch contains some minor changes including:
- Use lowercase hex literals
- Combine short lines
- Remove unnecessary curly braces
- Simplify struct initialization
- Leverage macro _SELPH_DQS_BITS
- Ensure whitespaces around binary operators
- Remove extra whitespaces after commas
- Change log level and remove unnecessary debug logs
BUG=none
BRANCH=kukui
TEST=emerge-kukui coreboot
Change-Id: I33616e6142325920c2fd7e6dc1dc88eb29c5cf34
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
If DRAM calibration fails or mem test fails using the cached calibration
results stored in flash, rerun DRAM full calibration. If partial
calibration fails or the mem test following it fails, hang forever.
Partial calibration acts as a fallback approach in case of full
calibration failure. Therefore, if it fails, there would be no other
ways to initialize DRAM. Instead of falling into reboot loop and
draining out of battery, it is better to just hang so that the end user
may notice that and send to RMA.
BUG=b:80501386,b:139099592
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I8e1d4f5bc7b45f45a8bfef74e86ec0ff6a556af4
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35481
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I tested the SPI through the SD card and fixed sd card communication problem.
Added two functions (claim_bus and release_bus). Setting CS signal is invalid by
default.
Change-Id: I60033a148c21bbd5b4946580f6cab0b439d346c6
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
It turned on some SKUs FSP hangs in Notify stage if IIO root ports are
disabled after MemoryInit. To address that hide IIO root ports earlier
in romstage.
TEST=the patch was ran on affected HW and success was reported
Change-Id: I6a2a405f729df14f46bcf34a24e66e8ba9415f9d
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
As VGA_ROM_RUN and libgfxinit are mutually exclusive in Kconfig,
we don't have to guard all the VGA BIOS if's and can assume
gfx_get_init_done() returns 0 until all the quirks are handled.
Then, we can run libgfxinit.
Change-Id: Id5d0c2c12b1ff8f95ba4e0223a3e9aff27547acd
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/20100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Port the backlight-PWM handling from Skylake instead of the previously
used Haswell version. We use a 200Hz PWM signal for all boards. Which
is higher than the previous devicetree value, 183Hz, but that was over-
ridden by the VBIOS anyway. 200Hz is still very low, considering LED
backlights, but accurate values are unknown at this time.
Lynx Point, the PCH for Haswell and Broadwell, is a transition point
for the backlight-PWM config. On platforms with a PCH, we have:
o Before Lynx Point:
The CPU has no PWM pin and sends the PWM duty-cycle setting
to the PCH. The PCH can choose to ignore that and use its own
setting (BLM_PCH_OVERRIDE_ENABLE).
We use the CPU setting on these platforms.
o Lynx Point + Haswell:
The CPU has an additional PWM pin but can be set up to send
its setting to the PCH as before. The PCH can still choose
to ignore that.
We use the CPU setting with Haswell.
o Lynx Point + Broadwell:
The CPU can't send its setting to the PCH anymore. BLM_PCH_
OVERRIDE_ENABLE must always be set(!) if the PCH PWM pin is
used (it virtually always is).
We have to use the PCH setting in this case.
o After Lynx Point:
Same as with Broadwell, only BLM_PCH_OVERRIDE_ENABLE is
implied and the bit not implemented anymore.
Change-Id: I1d61d9b3f1802ebe18799fc4d06f1f1d3b54c924
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
APL unhides the P2SB device in coreboot already. Do the same on SKL/KBL.
As the coreboot PCI allocator needs to be able to find the device,
unhide it after FSP-S.
The device is hidden in the SoC finalize function already and not visible
in the OS, as more P2SB device IDs have been added.
Other SoCs aren't updated, because they are too broken.
Fixes "BUG: XXX requests hidden ...." warnings in coreboot log.
Tested on Supermicro X11SSH-TF.
Change-Id: I0d14646098c34d3bf5cd49c35dcfcdce2c57431d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Michael Niewöhner
|
|
On Hyper-Threading enabled platforms the MSR_PRMRR_PHYS_MASK was written
when already locked by the sibling thread. In addition it loads microcode
updates on all threads.
To prevent such race conditions only call the code on one thread, such
that the MSRs are only written once per core and the microcode is only
loaded once for each core.
Also add comments that describe the scope of the MSR that is being
written to and mention the Intel documents used for reference.
Fixes crash in SGX MP init.
Tested on Supermicro X11SSH-TF.
Change-Id: I7102da028a449c60ca700b3f9ccda9017aa6d6b5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35312
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rework SGX enable status in a clean way without using a global variable.
Change-Id: Ida6458eb46708df8fd238122aed41b57ca48c15b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This is done by default in the main Makefile.inc.
TEST: With BUILD_TIMELESS=1 the resulting binary is identical before
and after the change.
Change-Id: Ie85e023df1f1c2b0f115e4f92719a511f60019c3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Since struct dramc_param has been defined, we can pass the struct
directly from mt_mem_init().
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: If7333fb579eff76dd9d1c2bf6fdfe7eccb22050f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35846
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Load the calibration params from flash first and check the correctness
of the params. If the params have correct format, perform DRAM fast
calibration with these params to reduce bootup time. Otherwise, load the
DRAM blob and perform DRAM full calibration.
Bootup time of DRAM partial calibration:
- 1,349,385 usecs with low frequency
- 924,698 usecs with middle frequency
- 1,270,089 usecs with high frequency
3,544,172 usecs in total.
Bootup time of DRAM fast calibration:
- 216,663 usecs with low frequency
- 328,220 usecs with middle frequency
- 322,612 usecs with high frequency
867,495 usecs in total.
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I8de29b14b1fb24b3b4f351c855c5c4d8f350cc34
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Load calibration params from flash. If the format of the params is
correct, use these calibration params for fast calibration to reduce the
bootup time.
Bootup time of DRAM partial calibration:
- 1,349,385 usecs with low frequency
- 924,698 usecs with middle frequency
- 1,270,089 usecs with high frequency
3,544,172 usecs in total.
Bootup time of DRAM fast calibration:
- 216,663 usecs with low frequency
- 328,220 usecs with middle frequency
- 322,612 usecs with high frequency
867,495 usecs in total.
BUG=b:139099592
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I9ef4265dd369a1c276bb02294696556df927e7bc
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35164
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The dramc_param module simplifies the communication between coreboot and
MTK DRAM full calibration blob, and is shared by both implementations to
ensure the same format of parameters.
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I4cfd634da1855a76706aab0b050197251e2ed4dd
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Since we always write to &ch[chn].ao.dummy_rd after calling
dramc_engine2_end(), this write could be merged into dramc_engine2_end()
to simplify code.
BUG=none
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: Ibb4bd5ed016118811ad2097098417c19f00f4263
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35749
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Devices behind LPC can expose more buses (e.g. I2C on a super-i/o).
So we should scan buses on LPC devices, too.
Change-Id: I0eb005e41b9168fffc344ee8e666d43b605a30ba
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29474
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
scan_usb_bus() and root_dev_scan_bus() had the very same implementation.
So rename the latter to scan_static_bus() and use that for both cases.
Change-Id: If0aba9c690b23e3716f2d47ff7a8c3e8f6d82679
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31901
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The new name should reflect better what this function does, as that
is only one specific step of the scanning.
Change-Id: I9c9dc437b6117112bb28550855a2c38044dfbfa5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31900
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: I1a8675a4e613a8efc135b05cde36f166acaa7ed4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The code is compiled on SKL/KBL, but the P2SB PCI IDs were missing.
Add them to make sure that the BAR0 doesn't change when running PCI
resource allocation.
Change-Id: I7cffbbc7d15dad14cccd122a081099b51dc1ce07
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I02c08b847fa1523e3296bdf9e3db5a7a322df72e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: Id78e594ae6490d39df76317f8fc3381fe681dd6f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Auto-discoverable PCI devices do not require field .enable_dev
of chip_operations to be set. They are matched with PCI drivers
by the use of PCI vendor and device ID fields.
The name given for the chip_operations struct must match the
pathname the way it is present in the devicetree.cb files. If
there was no match, util/sconfig would currently choose to
use the empty weak declaration it creates in static.c file.
Change-Id: I684a087a1f8ee4e1a5fd83450cd371fcfdbb6847
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
STACK_SIZE value needs to be changed from hex to decimal,
since -Wstack-usage doesn't recognize hexadecimal numbers anymore.
Change-Id: I73606d347194af5de5882a3387a4a5db17f9d94b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35593
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some VR parameter values for KBL-U with GT3 graphics are different from
values for other CPUs in this series [1]. However, GT3 iGPU will never
be detected, since the igd_id variable is compared with the LPC device
PCI ID. The patch fixes this bug.
[1] page 109, 7th Generation Intel(R) Processor Families for U/Y
Platforms and 8th Generation Intel(R) Processor Family for U Quad
Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019.
Document Number: 334661-006
Change-Id: I33527d90550a1de78c9375d3d3b0e046787a559b
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
According to the documentation[1], the Loadline in the unslased GT VR
domain should be 2 mOhms for KBL-U (2 Core, GT3 + OPC).
[1] page 109, 7th Generation Intel(R) Processor Families for U/Y
Platforms and 8th Generation Intel(R) Processor Family for U Quad
Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019.
Document Number: 334661-006
Change-Id: I433036e76d456a725ab27cf57c9bc2fe01a7ace1
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35781
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adds missing Intel HD/Iris iGPU PCI IDs for Kaby Lake processors and
updates the platform report for these devices.
These changes are in accordance with the documentation:
[*] page 10, Intel(R) Open Source HD Graphics and Intel Iris(TM) Plus
Graphics for the 2016 - 2017 Intel Core(TM) Processors, Celeron(TM)
Processors, and Pentium(TM) Processors based on the "Kaby Lake"
Platform. Programmer's Reference Manual. Volume 4: Configurations.
January 2017, Revision 1.0
Doc Ref # IHD-OS-KBL-Vol 4-1.17
[*] Linux kernel sources: include/drm/i915_pciids.h
Change-Id: I1cd1e4ab82f756141f8f13edf1c17f726166dffb
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Adds missing Intel HD/Iris iGPU PCI IDs for Skylake processors
These changes are in accordance with the documentation:
[*] page 11-12, Intel(R) Open Source HD Graphics, Intel Iris(TM)
Graphics, and Intel Iris(TM) Pro Graphics, Programmer's Reference
Manual. Volume 4: Configurations. May 2016, Revision 1.0
Doc Ref # IHD-OS-SKL-Vol 4-05.16
Change-Id: I0ba6e58ec3916dceea00519ac5a51503573e8935
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35493
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the DC Current Specifications [1], the current limit for
the graphical VR domain (Iccmax_gt) isn't same for different Kaby Lake S
CPUs. This value should depend on the iGPU model and processor TDP:
+---------------------+-----+------------+
| Segment | TDP | Icc_max GT |
+---------------------+-----+------------+
| Dual Core GT2/GT1 | 35W | |
| Dual Core GT2 | 51W | 48 A |
| Dual Core GT1 | 54W | |
+---------------------+-----+------------+
| Quad Core GT2 | 35W | 35 A |
+---------------------+-----+------------+
| Quad Core GT2 | 65W | 45 A |
| Quad Core GT2 K-SKU | 91W | |
+---------------------+-----+------------+
This patch adds the remaining Iccmax_gt current limit values from the
documentation [1].
[1] 7th Generation Intel(R) Processor Families for S Platforms and
Intel(R) Core(TM) X-Series Processor Family Datasheet, Volume 1,
December 2018, Document Number: 335195-003
Change-Id: I19766e4f8fab6b48565b65ed4cf13efbc213e654
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add defines to have some more readable code for devcietree.cb.
BUG=N/A
TEST=4K HDMI monitor and LCD working fine on Facebook FBG-1701
Change-Id: Ifc1a7657a528d1fc570dd16df66b078e37e014cb
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
These were unused and somewhat cryptic, assumed purpose was to store
pre-CBMEM timestamps in various PCI config space locations.
Change-Id: I074294446501d49a9bd3c823a2a794c33f443168
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35731
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: Ice1062d10b793dcbeb5b2ce9e2788fd3b6b6250b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When creating the IRQ routing, referenced device and
function number are always of the same PCI device.
Change-Id: Ifc4795245187f8d70650242a56e6ce771ef2167a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35735
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I953e9a7746232b4c40deca55eb6cb3bd7af91496
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The function does not otherwise need dev.
Change-Id: I75d3283b537151258ed48f7e4e0991dff53a803c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35670
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The previously provided device path made no difference, all
integrated PCI devices point back to the same chip_info
structure.
Change reduces the exposure of various SA_DEVFN_xx and
PCH_DEVFN_xx from (ugly) soc/pci_devs.h.
Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Two fields of struct sdram_params are renamed for future CL of DRAM full
calibration. Field 'impedance' is also removed.
BUG=none
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I2f9673fd5ea2e62ee971f0d81bdd12aaf565e31c
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35738
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the the FSP Parameter PchHdaVcType a devicetree setting and make
use of it in the devicetrees of all boards that currently set it.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
Because vcore is the power of ddrphy in the soc, DRAM DVFS needs to be
calibrated with different vcore voltages to get correct parameters.
A new API is added to allow changing vcore voltage.
BUG=b:80501386
BRANCH=none
TEST=measure vcore voltage with multimeter
Change-Id: Ic43d5efe7e597121775dc853a3e2a08ebc59657d
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33391
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a PCI standard register, no need to alias its
definitions under different names.
Change-Id: Iea6b198dd70fe1e49b5dc0824dba62628dedc69a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Apparently romcc-bootblock just barely built without
XMM registers.
Change-Id: Ie7b1101f47c2dfb718bef99f8c05f9d575c821cd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The new macro name contains the number of cores:
PCI_DEVICE_ID_INTEL_SKL_ID_H_4 - 4 core
PCI_DEVICE_ID_INTEL_SKL_ID_H_2 - 2 core
Change-Id: I190181b213d55865aa577ae5baff179fef95afde
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35302
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To support mt8183 power saving during suspend to RAM, this patch loads
SPM firmware to support SPM suspend. SPM needs its own firmware to do
these power saving in the right timing under correct conditions. After
linux PM suspends, SPM is able to turn off power for the last CPU and do
more power saving for the SoC such as DRAM self-refresh mode and turning
off 26M crystal.
BUG=none
BRANCH=none
TEST=suspend/resume passes for LPDDR4 3200
Change-Id: I3393a772f025b0912a5a25a63a87512454fbc86e
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|