summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2018-01-12soc/intel/common: Add Intel HDA common block driverDuncan Laurie
There is common HDA code in soc/intel/common that provides generic HDA support functions, but it does not provide a driver. This change adds a common block driver for HDA that provides a ramstage driver for SOCs that need to initialize an HDA codec. This was tested on a board with an HDA codec to ensure that it properly detected it and ran the codec init steps. Change-Id: I41b4c54d3c81e1f09810cfaf934ffacafca1cf38 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-12amd/stoneyridge: Keep SPI flash cacheable during POSTMarshall Dawson
A side effect of using the common MTRR assignment code is the flash device loses its WP setting and is no longer cacheable. After MTRR setup, reenable the setting for the duration of POST. TEST=Run on Kahlee and inspect MTRRs prior to AmdInitLate() BUG=b:70536683 Change-Id: Ib4924e96e2876e1e92121bb52d1931ead723d730 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-01-12soc/amd/common/pi: Fix issue in AGESA heap allocatorMarc Jones
The heap allocator would try to split a buffer node that was too small for another node. In the failing case, the buffer node was 0x140 bytes and the requested size was 0x133 bytes. The logic would check that there was room for the header and buffer and try to split the buffer node. The buffer node header is 0xC bytes, so 0x13F bytes are need. The problem is that it didn't leave room for another node header and a little space for a buffer. BUG=b:71764350 TEST= Boot grunt. BRANCH=none Change-Id: Iece5e12d5787415a335bb953985331a5dc312152 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-01-10soc/rockchip/rk3399: Ensure full eDP init sequenceEge Mihmanli
This patch fixes 2 edp display issues: 1. When rk_edp_prepare fails >3 times, edp_init isn't run because while-condition is not satisfied. Then, only a partial init sequence is ran. This causes all aux transactions to fail. 2. If rk_edp_prepare never succeeds, coreboot never leaves link training stage due to infinite loop. Boot process is stuck. TEST=Boot past eDP initialization stage and make sure AP logs don't have show aux transaction fails. Change-Id: I44c3f53e8786558c43078d4afe9acde4d64796e7 Signed-off-by: Ege Mihmanli <egemih@google.com> Reviewed-on: https://review.coreboot.org/23152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-01-10soc/intel/cannonlake: Add a call to gspi_early_bar_init in bootblockFurquan Shaikh
This change adds a call to gspi_early_bar_init in bootblock to allocate a temporary BAR for any GSPI buses that are accessed before resource allocation is done in ramstage. Change-Id: I82387a76d20fb272da6271dd9e5bf2c835d5b146 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22781 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-10soc/amd/common/block/acpi: Add halt.cChris Ching
Creating initial common acpi and implement halt.h BUG=b:71575631 BRANCH=none TEST=put poweroff() call in Kahlee's mainboard_final and board turns off correctly Change-Id: Ie7dd9851dcb240c53f2487b4f4b8a3e51d6b98d6 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/23074 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-09soc/intel/cannonlake: Remove redundent CNL CPUID macrosSubrata Banik
This patch ensures all CannonLake CPUIDs are part of mp_init.h hence remove duplicate macro definitions from SoC code. TEST=Build and boot CannonLake RVP Change-Id: Ibb6a22d5c708248bb53522f906cffb462142b7bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-08soc/amd/stoneyridge/i2c: fix formatting and global symbolAaron Durbin
The i2c_bus_address array doesn't need to be a global symbol. Also, the array initializer had some weird indention and there was an extra new line. For consistency the first entry is multiplied by 0 so the formatting is similar. BUG=b:69416132 Change-Id: I74f6dca3a22a245759536f792ce04ac61735b6d0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-01-08soc/intel/cannonlake: Initialize DDI-A lane in Normal modeAbhay Kumar
Enable DDI-A (eDP) when pre-OS graphics is not Loaded or in normal mode. This will make sure that kernel will detect eDP. TEST=Edp should come up in normal mode. Change-Id: I6353020f892f2d7b75997eace88b3074adc32aef Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/22799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-08soc/amd/stoneyridge: Define CONSOLE_UART_BASE_ADDRESSArthur Heymans
The build system for the SeaBIOS payload needs this when DRIVERS_UART_8250MEM is set. Set it to the first uart controller, which the coreboot code also seems to do. Fixes: https://ticket.coreboot.org/issues/150 Change-Id: I962f750f89e0352082e0b7415ceaa9bd350fdf0b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-07soc/amd/common: Only load post-memory AGESA into RAM when split enabledDaniel Kurtz
CONFIG_AGESA_SPLIT_MEMORY_FILES controls whether AGESA is split into pre- and post-memory binaries when it is built. Building AGESA this way is required when doing the new "load post-memory AGESA binary into ram" feature. Thus, condition this new path on the CONFIG option being enabled. BUG=b:71641792 TEST=build and boot kahlee with CONFIG_AGESA_SPLIT_MEMORY_FILES disabled Change-Id: Ibec9db67437c57092e0f7acf0e3185865dc02688 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23141 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-07soc/intel/cannonlake: provide LPDDR4 memory initNick Vaccaro
Instead of having the mainboards duplicate logic surrounding LPDDR4 initialization provide helpers to do the heavy lifting. It also handles the quirks of the FSP configuration which allows the mainboard porting to focus on the schematic/design. BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I4a43ea121e663b866eaca3930eca61f30bb52834 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/22204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-073rdparty/blobs/soc/amd/stoneyridge: Use new location of stoneyridge blobRichard Spiegel
Stoneyridge related contents of 3rdparty/blobs/southbridge/amd/kern were moved to 3rdparty/blobs/southbridge/amd/stoneyridge. Commit the new blob to coreboot, and modify src/soc/amd/stoneyridge/Kconfig to use it. BUG=b:69613465 TEST=Build and run kahlee. Change-Id: I1784824dc7767c620e2fcbad7c6e5674934832ff Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-05soc/intel/cannonlake: Correct PMC/GPIO routing informationLijian Zhao
PMC and GPIO DWx definition is not identical, hence update that to correct information. For cannonlake lp PCH, GPIO group C, group E and group GPD is different for PMC GPIO_CFG and GPIO MISCCFG. Also add function call to set up GPE routing in bootblock stage. TEST=Boot up into OS, and manually check PMC GPE status Change-Id: I1edb83edabc72e8a762b129cf51dcd936cd37ddf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-01-05soc/amd/common: load post-memory AGESA as rmoduleAaron Durbin
Now that the AGESA binary is split into two sections load the post-memory AGESA binary into ram. It needs to be an rmdoule so that it can be relocated into ram. agesawrapper_amdinitenv() entry CBFS: 'VBOOT' located CBFS at [10000:cfd40) CBFS: Locating 'AGESA_POST_MEM' CBFS: Found @ offset 875c0 size 11c5e Decompressing stage AGESA_POST_MEM @ 0xc757ffc0 (183452 bytes) Loading module at c7580000 with entry c7580000. filesize: 0x2bafc memsize: 0x2bb0d Processing 1112 relocs. Offset value of 0xc7780000 AGESA call 00020001 using c75818fe AGESA call 00020003 using c75818fe Fch OEM config in INIT ENV Done agesawrapper_amdinitenv() returned AGESA_SUCCESS BUG=b:68141063,b:70714803 TEST=Booted kahlee. Change-Id: Ic0454e0d6909cb34ae8be2f4f221152532754d61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-05soc/amd/common: Allow AGESA file split for pre- and post-memoryJustin TerAvest
By splitting the binary files for platform initialization, the post-memory code can be modified to stop executing in place (--xip). This change creates two separate sections in CBFS for AGESA and loads the appropriate file at the correct stage. BUG=b:68141063 TEST=Booted kahlee with split agesa enabled. Change-Id: I2fa423df164037bc3738476fd2a34522df279e34 Signed-off-by: Justin TerAvest <teravest@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-03soc/amd/stoneyridge: Add I2C supportChris Ching
BUG=b:69416132 BRANCH=none TEST=make Change-Id: Id940af917c9525aba7bc25eea0821f5f36a36653 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-02soc/amd/common/block/pi: Format files to standardsRichard Spiegel
Files agesawrapper.c and heapmanager.c have several non-conformity with coreboot standards, including lines longer than 80 characters, use of "} else {" after a return and wrong comment block formatting. Fix all such issues, so that it passes commit tests. BUG=b:69262110 TEST=Build with no error gardenia and kahlee (no code change, just file formatting). Change-Id: Iefe741cd62bc41a7975c3dd10ac9355352de3abb Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-02soc/intel/skylake: Add device setting for sata power optimizationKane Chen
This change provides option in devicetree and feeds the option to FSP SataPwrOptEnable UPD for power saving purpose BUG=b:70491485 Change-Id: I9099c5c97765a118bdee64da303cb3ba6ceb951b Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/23018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-23soc/intel/cannonlake: Select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2Furquan Shaikh
BUG=b:70628116 Change-Id: I40ebbb143b4618f83f454b9db2717589ba5ce99e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22956 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-23soc/intel/common/block/gspi: Add SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2Furquan Shaikh
Even though kaby lake and cannon lake are using the same GSPI controller, bit meanings (for polarity and state) in SPI_CS_CONTROL register are significantly different. This change provides a new Kconfig option that can be selected by SoCs using these new bit definitions of SPI_CS_CONTROL. Common code takes care of setting the right value for polarity and state field depending upon the version selected by SoC. BUG=b:70628116 Change-Id: Ic69321483a58bb29f939b0d8b37f33ca30eb53b8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-23soc/intel/{apollolake, cannonlake, common, skylake}: Add _soc_ prefix in ↵Subrata Banik
weak function This patch ensures all soc function name is having _soc_ prefix in it. TEST=Able to compile SMM common code for all supported SOC. Change-Id: Iab1b2f51eaad87906e35dbb9e90272590974e145 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/amd/stoneyridge/chip.c: Move setup_bsp_ramtop to soc_init()Richard Spiegel
Issue first reported at commit 1587dc8a2b, the call of functions setup_bsp_ramtop() and setup_uma_memory() should be moved from enable_dev() to soc_init(). The function setup_uma_memory() no longer exists, its functionality transfered to agesawrapper_amdinitpost. Move setup_bsp_ramtop() as required. BUG=b:62240756 TEST=Build and boot kahlee. Change-Id: I44e6cab17a8f7f364fc57657f41b211ec9d17641 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-22soc/intel: Treat time-out as failure in HECILijian Zhao
If HECI gets times out when waiting for read slots, there's no need to read back reply message to decide if the HECI recieve successed or not. Otherwise, system will stuck after global reset required. BUG=b:707290799 TEST=Boot up meowth board without battery, and confirm hard reset got trigged after heci time out. Change-Id: I7c1655284d7027294d8ff5d6a5dbbebe4cbd0c47 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22amd/stoneyridge: Increase pre-cbmem console sizeMarshall Dawson
The existing stoneyridge pre-cbmem console log contains about 250 bytes of unused space. Increase this amount to accomodate any additional debug messages. BUG=b:64980233 TEST=Build and boot Kahlee, inspect console log with "cbmem -c" Change-Id: Ia307795e91d81ff9b2be027916081f6824f90bad Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion supportDivya Chellap
New UPD PcieRpClkSrcNumber introduced in FSP V2.9.2 to configure clock source number of PCIe root ports. This UPD array is set to clock source number(0-6) for all the enabled PCIe root ports, invalid(0x1F) is set for disabled PCIe root ports. BUG=b:70252901 BRANCH=None TEST= Perform the following 1. Build and boot soraka 2. Verify PCIe devices list using lspci command 3. Perform Basic Assurance Test(BAT) on soraka Change-Id: I95ca0d893338100b7e4d7d0b76c076ed7e2b040e Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22ic2/designware: Move Intel i2c logic to shared driverChris Ching
BUG=b:70232394 BRANCH=none TEST=emerge-reef coreboot emerge-glados Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/amd/stoneyridge: select RTCMarc Jones
Stoneyridge has an RTC. Elog requires it for timestamps. BUG=b:65485690 TEST=Build Kahlee with Elog. Check mosys eventlog list for timestamps. Change-Id: I4d820fbe11043e7e3153d67159f52274d5f14bae Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-22soc/intel/skylake: Make use of common SMM code for SKLSubrata Banik
This patch ensures skylake soc is using common SMM code from intel common block. TEST=Build and boot soraka/eve Change-Id: I8163dc7e18bb417e8c18a12628988959c128b3df Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/22826 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-22soc/intel/cannonlake: Add SoC API to make use SMM common codeSubrata Banik
Add SoC API to detect any illegal access to write into the BIOS located in the FWH. Change-Id: If526cbae9afee47fa272bdf74e04416aff100e88 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22soc/intel/common: Add missing SoC common function into SMM librarySubrata Banik
Modify SMM common code in order to accommodate SKL, CNL, APL, GLK SOC code. Change-Id: Ie9f90df3336c1278b73284815b5197400512c1d2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22869 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-21soc/intel/cannonlake: Implement pmc_soc_restore_power_failure as per EDSSubrata Banik
TEST=CNL_RVP is able to power on after reconnecting power supply. Change-Id: I41e655fe79d958cce9e627ea2f2380185364ab19 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22840 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-21soc/intel/skylake: Move Enable power button SMI code from smi.c to pmc.cSubrata Banik
Original commit hash aeb2d64c85ca2c3a77f50d57e3a92f6fc0a5c2d3 (soc/intel/skylake: Enable power button SMI when jumping to payload) Change-Id: Ia4fe2694006baf24ed475c85aaffa6a0d2a6031d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22868 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-21soc/intel/skylake: Implement pmc_soc_restore_power_failure as per EDSSubrata Banik
TEST=KBL_RVP is able to power on after reconnecting power supply. Change-Id: Ic707164a576ffb25418eb6553843cd8edc608800 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-21soc/intel/common: Add API to restore power failure into PMC common codeSubrata Banik
PMC config register need to program to define which state system should be after reapplied power from G3 state. 0 = System will return to S0 state 1 = System will return to S5 state 2 = System will return to previous state before failure Refer to EDS for detailed programming sequence. Change-Id: I0ce2cc77745d00a8cfe3eed7c6372af77e063d02 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22838 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-20soc/intel/apollolake: Add SMI and SCI support for ESPIShaunak Saha
This patch adds the SMI bits for SMI_EN, SMI_STS and GPE register in pm.h. The southbridge handler for espi smi is also added. In gpe.h we add GPE0A_ESPI_SCI_STS which is bit 20 in GPE register and enables the setting of the ESPI_SCI STS bit to generate a wake event and/or an SCI/SMI. TEST= Boot to OS. Change-Id: I2b8372ffbe0949ddd4aa83bdd7c0a01ade3ed40e Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22758 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-20soc/intel/denverton_ns: Add Denverton-AD system agent idLew, Chee Soon
This is to add support for Denverton-AD soc. Change-Id: I539abedd65bcbdb97b64f58d0b2273ff8eb67420 Signed-off-by: Lew, Chee Soon <chee.soon.lew@intel.com> Reviewed-on: https://review.coreboot.org/22605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-20soc/intel/cannonlake: Tell FSPM UART port numberLijian Zhao
Cannonlake FSP will send debug message on selected UART port, use same coreboot UART debug port to FSP. TEST=Boot up with board have UART port 0 and can see the print of FSP Change-Id: Id72e459d2fbb1f16b005d22fac66667086880384 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-20amd/common/psp: Add BootDone commandMarshall Dawson
After the PSP receives the MboxBiosCmdBootDone, it will no longer honor any command where the command-response buffer exists outside of SMM memory. Add the command and automatically execute it before booting the payload. BUG=b:69971683 TEST=Boot Kahlee and observe console log Change-Id: I8258a9e2f2627bf24342f927a3e7f49b49dc1d88 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-20amd/common/psp: Convert structure init to C99Marshall Dawson
Use C99 designated initializers for the psp_notify_dram() buffer structure. Change-Id: I2e18b3a2c19b8fb17d0f654b16def52517538957 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-20amd/common/psp: Assume PSP command register already set upMarshall Dawson
Remove the frequent setting/restoring of the PSP's bus-mastering and memory decoding settings. It is up to the caller to ensure it is already set properly. Change-Id: I7e29a3935df94d16de90b28ff78449d23fe01666 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-20amd/stoneyridge: Force PSP command reg settings in bootblockMarshall Dawson
A subsequent patch to the PSP library will rely on the device already having its PCI command register set to allow memory decoding and mastering enabled. Program the command register ahead of loading the SMU FW1 blob in bootblock. When the device has not been set up (e.g. when SMU FW is not selectable), AGESA sets up the device. As a result, a similar change is not required before sending the DRAM ready command. Change-Id: Id586106751286c4767b5c16ed7e1604523635492 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22876 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-19soc/amd/common/block/pci: Fix validation of pointerRichard Spiegel
Procedure write_pci_int_table() does not validates intr_data_ptr. It must be validated together with picr_data_ptr and idx_name. BUG=b:69868534 TEST=Build fake kahlee with intr_data_ptr not initialized, boot and see error message. Than build correct kahlee and verify that error message is gone. Change-Id: I5ee9a362600dbd6325254d7431172501181b52b0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-19soc/amd/stoneyridge/bootblock/bootblock.c: Fix unused valueRichard Spiegel
In function load_smu_fw1(), variable base receives one value and is immediately overwritten. Remove the first line, as it's useless. This fixes CID 1383612 BUG=b:70620140 TEST=Build kahlee and boot. Change-Id: I1a1eae52722606a9e871e26faa7927e207102ae8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-18amd/stoneyridge: Skip VGA initialization on S3 resumeMarshall Dawson
Sync with the other AMD implementations. Change-Id: I222cc7fcf5e58f451cee9621a1b876346226af09 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-18soc/amd/common: Factor out InitPost printed results to functionMarshall Dawson
Make a static function that can report the AmdInitPost() results. This makes it easier to keep lines within 80 columns. Clean up surrounding source. BUG=b:62240746 TEST=Build and boot Kahlee Change-Id: I6d288e76e7510528659436e61fdfa1d5db01f06c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-18soc/amd: Move stoneyridge features out of agesawrapperMarshall Dawson
The AGESA wrapper should not use and CONFIG_STONEY* values, nor should it make any assumptions about the capabilities of a particular device. Move these into stoneyridge northbridge and southbridge files. BUG=b:70670425 TEST=Build and run Kahlee Change-Id: I706edbb6a048b64389ba3077d5df0fe6155070b3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-18soc/amd/common: Remove #ifndef/#endif from AGESA wrapperMarshall Dawson
There isn't a good reason to keep the checks for __PRE_RAM__. The global variables are not used outside of ramstage and the linker removes them cleanly in other stages. BUG=b:70671590 TEST=Build and boot Kahlee Change-Id: I7a35141f212f340c157d57fde8daf93c0c383af8 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-12-18soc/amd/common: Make AGESA event log parser staticMarshall Dawson
The function agesawrapper_readeventlog() is not used outside of the wrapper. Relocate it within the file and make it static. Change-Id: Ia7fefb4eadbace0cc2fb0f519a1acb7906baaf12 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22902 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-18soc/amd/common: Clean up AGESA event log functionMarshall Dawson
Clean up the source for agesawrapper_amdreadeventlog: * shorten the name to help keep lines within 80 columns * convert initializers to C99 * break the call from the callers' if() statements * streamline the printk formatting BUG=b:70671442 TEST=Build and run Kahlee, check console log Change-Id: I402c75e4d65a592b9d1557c5852df03e48e206b9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-17drivers/mrc_cache: move mrc_cache support to driversAaron Durbin
There's nothing intel-specific about the current mrc_cache support. It's logic manages saving non-volatile areas into the boot media. Therefore, expose it to the rest of the system for any and all to use. BUG=b:69614064 Change-Id: I3b331c82a102f88912a3e10507a70207fb20aecc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-17soc/intel/apollolake: move default y options to CPU_SPECIFIC_OPTIONSAaron Durbin
A non-user configurable option that defaults to y should just be auto-selected instead of instantiating an instance of an option. BUG=b:69614064 Change-Id: I55cf28eaf0233182d4fa488cf4b31e8ad379b6c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-17soc/intel/broadwell: remove CACHE_MRC_SETTINGS optionAaron Durbin
The CPU_SPECIFIC_OPTIONS already auto-selects the option. There's no point in having a selectable option that is already selected. There's already an option to select it within intel/common. BUG=b:69614064 Change-Id: I0c7ce7d3f344668587a75ec683343559a4caea99 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-17soc/intel/fsp_baytrail: remove nvm headers and codeAaron Durbin
This code is not used at all any longer. Remove it. BUG=b:69614064 Change-Id: I362280f876a335c0cc1c5691b86f5b27e3b5e2c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-16soc/intel/common: remove nvm headers and c fileAaron Durbin
There's no sense in having the nvm abstraction in its own files. Put that support directly into mrc_cache.c. BUG=b:69614064 Change-Id: I0f1a801c6e1a8c35f70faf9e4318bdc45955047a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-16soc/intel/broadwell: implement spi_flash_ctrlr_protect_region()Aaron Durbin
Implement the spi controller flash_protect() callback. No need to have a global spi_flash_protect() once implemented. BUG=b:69614064 Change-Id: I83f4310d8f78ba64727ba75eb75708d0cbaa7d53 Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-16soc/intel/common/fast_spi: implement spi_flash_ctrlr_protect_region()Aaron Durbin
In the fast spi support implement the callback for flash_protect(). This removes the need for having SOC_INTEL_COMMON_SPI_FLASH_PROTECT Kconfig option as well spi_flash_get_fpr_info() and separate spi_flash.[ch]. BUG=b:69614064 Change-Id: Iaf3b599a13a756262d3f36bae60de4f7fd00e7dc Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-15soc/intel/common/nvm: utilize spi_flash_ctrlr_protect_region()Aaron Durbin
Now that there is spi flash controller flash protection use that API so the spi_flash_protect() API can be sunsetted since it was isolated within the Intel code base. BUG=b:69614064 Change-Id: I3908d0e3105b0ef9a0fbf4fc9426ac1be067f648 Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-15soc/intel/apollolake: Remove duplicate selectsMarshall Dawson
Remove Kconfig selected symbols that are duplicates in the same file. Change-Id: I21a3814131f0c8e08732e826dd1bcbb677cbe0aa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22852 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-15soc/amd/common: Update agesawrapper_call.hRichard Spiegel
Solve issues related to agesawrapper_call.h that came up at review 75dd50e233 (review 19724). This includes a hard coded table size and 2 macros: AGESAWRAPPER_PRE_CONSOLE() and AGESAWRAPPER(). Remove AGESAWRAPPER_PRE_CONSOLE(), and replace AGESAWRAPPER() calls with the actual content of the macro. BUG=b:62240989 TEST=Build kahlee with no errors, boot recording serial output and compare to serial output from a build without these changes. Change-Id: Ic51917d3961a51d4e725ff45b04f45eefe149855 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22850 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-14soc/intel/skylake: Add integrated LAN config parametersDuncan Laurie
Add parameters to configure the integrated LAN via FSP. Since this takes over a PCI CLKREQ# pin it needs to know which pin it should use, and there are additional parameters for LTR and a "K1 power save" feature. This was tested on a KBL-R board with integrated LAN, verifying that the device is functional under Linux with the e1000e driver. Change-Id: Idb200cec90a3c0d4d9c914bae9983a3bcdafcd06 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/22856 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-14soc/intel/apollolake: add _RMV attributes to eMMC device ACPIPatrick Georgi
Required so Windows knows if the storage is removable or not. Change-Id: I0822d767ada872d55357ff229e47e08fbe778a36 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/22830 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-14soc/intel/common/block/i2c: fix orphaned Kconfig optionsAaron Durbin
The SOC_INTEL_COMMON_LPSS_I2C option is no longer used. Likewise, the SOC_INTEL_COMMON_LPSS_I2C_DEBUG option which is dependent on SOC_INTEL_COMMON_LPSS_I2C is by definition not used either. Therefore, remove SOC_INTEL_COMMON_LPSS_I2C and change the name/dependency for SOC_INTEL_COMMON_LPSS_I2C_DEBUG to SOC_INTEL_COMMON_BLOCK_I2C_DEBUG. BUG=b:70232394 Change-Id: Icd77f028b77d8f642690a50be4ac2c50d9ef511a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22874 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@chromium.org>
2017-12-14src/soc/intel/apollolake: include helpers.h in chip.hPratik Prajapati
include helpers.h in chip.h so that devicetree can use macros from helpers.h Change-Id: Idfdee637a9b66a30be31b9ed113e1a44e4032f34 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/22774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-14soc/intel/cannonlake: Fix UART2 serial log broken issueSubrata Banik
Cannonlake rvp serial log has been regressed with commit I7eea910e065242689e87adac41281131674b39af(soc/intel/cannonlake: Clean up UART code) because of common UART code is unable to link all __weak function implementation from SoC uart.c due to existing macro #define __SIMPLE_DEVICE__. Hence UART2 PCI device resource programming is different than what it's been programmed before. This patch ensures UART2 PCI device resource enumeration is working and we are getting serial log as expected. Change-Id: I1f9df5e8d6490090ed65b06bdd0b40f824d36a8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22862 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-14soc/amd/stoneyridge: Remove "\t" from name tableRichard Spiegel
Remove "\t" from name strings in soc/amd/stoneyridge/southbridge.c array irq_association[], and change the print string in soc/amd/common/amd_pci_util.c that use the names from "%s" to "%-20s". This sets a fixed field of 20 characters for the string name, allowing for variable length to the names (up to 20 characters), thus saving memory space used by the strings. BUG=b:70344551 TEST=Build and boot, record output of irq routing and verify alignment. Change-Id: I92dfac9b64932fb0cd3359abd4d1aac651535f1a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-13src/soc/intel/cannonlake: Add _PRW for CNViBora Guvendik
Add _PRW so that wake on WLAN feature works. TEST=Boot to OS and check if WLAN device wakes host. Change-Id: Id6689754d1c4100615e4e4ae5a7f9846f4bf785f Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-12-13vc/amd/pi/0067F00: add option to add AGESA binary PI as stageAaron Durbin
Stage addition to CBFS allows relocation to happen on the fly. Take advantage of that by adding AGESA binary PI as a stage file so that each instance will be relocated properly within CBFS. Without this patch Chrome OS having multiple CBFS instances just redirects the AGESA calls back into RO which is inappropriate. BUG=b:65442265,b:68141063 TEST=Enabled AGESA_BINARY_PI_AS_STAGE and used ELF file. Booted and noted each instance in Chrome OS build was relocated. Change-Id: Ic0141bc6436a30f855148ff205f28ac9bce30043 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-13soc/intel/skylake: make tcc_offset take effectmarxwang
Currently, "tcc_offset" defined in devicetree is overwritten by Intel FSP-S UPD "TccActivationOffset". This patch will make "TccActivationOffset" refer to "tcc_offset". TEST=check if MSR (0x1a2[29:24]) value is updated with "tcc_offset" by iotools (rdmsr 0 0x1a2). Change-Id: Ibc6f33bea19a1d59bc7e407815210942b38f0702 Signed-off-by: marxwang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/22818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-13soc/intel/apollolake: Remove set_subsystem() from SoCSubrata Banik
Intel common PCI driver is handle PCI subsystem ID programming, hence no need to have an explicit soc function to do the same. TEST=PCI subsystem id is getting programming during pci enumeration. Change-Id: I3eb362ff1f3f6d5c81a0dbe854d8ecd59d5a0453 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-13soc/intel/skylake: Remove set_subsystem() from SoCSubrata Banik
Intel common PCI driver is handle PCI subsystem ID programming, hence no need to have an explicit soc function to do the same. TEST=PCI subsystem id is getting programming during pci enumeration. Change-Id: Iead57a286b26d532e578cfff99f412c23fd4c2fe Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-13soc/intel/common/block: Add option to have subsystem_id in common pci driverSubrata Banik
This patch ensures all Intel common PCI devices can have subsystem ID programmed along with PCI resource enabling (.enable_resources) as part of PCI enumeration process. TEST=Build and boot KBL/CNL/APL/GLK to ensure PCI subsystem ID getting programmed. Example: Enabling resources... PCI: 00:00.0 subsystem <- 8086/590c PCI: 00:00.0 cmd <- 06 PCI: 00:02.0 subsystem <- 8086/591e Change-Id: I46307b0db78c8864c85865bd0f3328d5141971be Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22768 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-13soc/intel/skylake: Enable LPC IO Decoding on PCRpraveen hodagatta pranesh
According to the PCH BIOS Spec (Doc#549921/Rev-2.3.4), section 2.5.1.6, it is a requirement to program the same value programmed in LPC "PCI offset 82h" into "PCR[DMI]+2774h" to fully enable the Lpc IO enable decoding which is missing in current source. Without above changes, Skylake Saddlebrook platform with a SIO does not boot. Change-Id: Ief26e2718325b9d74ea0f83d47d2f917e0972173 Signed-off-by: praveen <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/22819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-12vc/amd/pi/00670F00: fix #include paths to only use <amdblocks/header.h>Aaron Durbin
Ensure that soc/amd/common/blocks/include is the only #include path for the AMD common code. This removes the duplicate soc/amd/common include as well using the correct #include header in AGESA.c. BUG=b:69262110 Change-Id: I50d85b28514fd905df415f0cc052b9924ee4e741 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-12soc/amd/common: Move AGESA related source filesRichard Spiegel
Move AGESA related source files in soc/amd/common under block directory. Folder soc/amd/common/block subfolders should mimic soc/intel/common/block subfolders (one subfolder per subject). BUG=b:69262110 TEST=Build with no error gardenia and kahlee (no code change, just folder reorg). Change-Id: I497cdefe64e8dff00aaff7153c4ffa9c57c9acf8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-12soc/amd/common: Move Agesa related headersRichard Spiegel
Move AGESA related headers in soc/amd/common to soc/amd/common/block/include/amdblocks. BUG=b:69262110 TEST=Build with no error gardenia and kahlee (no code change, headers moved). Change-Id: I5d3064625ddf8caaf370aabaf93165c6817f1ca0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-11soc/amd/common: Move files to common/blockRichard Spiegel
The following files need to be moved: amd_pci_util.c, amd_pci_util.h and spi.c. The remaining files are AGESA related and will be part of a separate issue/commit. BUG=b:62240201 TEST=Build with no error gardenia and kahlee (no code change, just folder reorg). Change-Id: I3f965afa21124d4874d3b7bfe0f404a58b070e23 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-11soc/intel/cannonlake: Add support for D0 steppingLijian Zhao
D0 stepping with CPUID 0x60663 need to be added in coreboot. TEST=Boot up with D0 stepping processor Change-Id: I3b0f2616843367d2bfbee1b5bf75772b9e83e931 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-11google/gru: Stop mucking with unused I2S0 pins in codec configJulius Werner
Due to a schematic error, our code was written to configure more I2S0 pins than are actually used. We're also pinmuxing the whole bank of pins over to the I2S controller even though we don't need them all. Restrict the GPIO initialization and pinmuxing to the pins we really need so the other ones can be correctly used as SKU ID pins on Scarlet. Also, move the "audio" IO voltage domain selection to the other such selections in the bootblock, since that covers two whole banks of GPIOs and there's no guarantee that they're all used for audio (and thus not needed before ramstage). BUG=b:69373077 TEST=Booted Scarlet, confirmed correct SKU ID (7) was detected on rev2. Change-Id: I9314617e725fe83d254984529f269d4442e736f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org>
2017-12-11soc/amd/common: Collect timestamps before and after AGESA callsMartin Roth
BUG=b:70432544 TEST=Build & boot kahlee. Look at timestamps. Change-Id: I8209160f8e23ab77987f8e515c7b00d94f68c8be Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-11vc/amd/pi/00670F00/binaryPI: cache the AGESA dispatcherAaron Durbin
Instead of repeatedly walking cbfs for the AGESA blob and parsing it cache the resulting dispatcher value. There's only one dispatcher table so use it. The resulting change is that this work is done one time per stage. BUG=b:70401101 TEST=Booted and noted only one lookup per stage. Change-Id: Iaa4aecc384108d66d7c68fc5fb9ac1c3f40da905 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22789 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2017-12-11soc/amd/stoneyridge: Enable SPI writesJohn E. Kabat Jr
- Change soc/amd/stoneyridge/Kconfig to set BOOT_DEVICE_SUPPORTS_WRITES BUG=b:65485690 TEST=Build & boot kahlee. Change-Id: I595a27ac27daa42c2499de1a343bc30be9a89fa6 Signed-off-by: John E. Kabat Jr <john.kabat@scarletltd.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-11soc/amd/common: Add amdblocks/spi.hMarc Jones
Add the spi header for spi function prototypes. Fixes spi.c build error for the missing header. Change-Id: I0dbb5bf84cc3462a7aa58a5531d6b8b8bc8ca4df Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-09soc/intel/skylake: add acoustic noise mitigation params for FSP 1.1Matt DeVillier
Adapted from Chromium commit d6655eb [Skylake: create UPD Interface for acoustic noise tuning] Add FSP 1.1 params needed for acoustic mitigation on google/caroline (to be upstreamed in a subsequent commit). TEST: build/boot google/caroline Change-Id: Ifb36ecef8c1735c63a5322d952929e9c34cddfb9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-09soc/amd/stoneyridge/include: delete amd_pci_int_types.hRichard Spiegel
Due to review 20b8c821e4 being abandoned and review 376dc82dca being merged, file amd_pci_int_types.h became orphaned (not included by any file), while an array similar to intr_types[] (but that also includes the associated register index) was created in southbridge.c replacing the original array functionality. Remove the header amd_pci_int_types.h from the repository. BUG=b:70328428 TEST=Build kahlee with no errors. Change-Id: I53a9d7ebb27edbc4e136c9b17f5c709930e35223 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-09soc/intel/cannonlake: Clean up UART codeAamir Bohra
Clean up and move UART related code under a single uart.c file. Change-Id: I7eea910e065242689e87adac41281131674b39af Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-08soc/intel/apollolake/acpi/cnvi.asl: Add _PRW for CNViHannah Williams
Add CNVi GPE in _PRW for wake on WLAN from S3 Change-Id: I682c76b9c5c524face7b540ecb185a3d7b4b2da3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-08soc/intel/apollolake/acpi/pch_hda: Add _PRW for HD-AHannah Williams
Add GPE in _PRW for wake from S3 for HD-audio controller Change-Id: I6ad289be8c58e48ad0ec9d2ee0894fe16b8f2e1c Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-08soc/intel/cannonlake: Add PCH ID support in bootblock/report_platform.cSubrata Banik
This patch ensures that all required information for pch/mch/igd deviceid and revision are available in single stage and makes use of local references. TEST=Build and boot cannonlake_rvp to get PCH information as below PCH: device id xxxx (rev xx) is Cannonlake-Y Premium Change-Id: I420e94043145e8a5adcf8bb51239657891915d84 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-08soc/intel/skylake: Clean up bootblock/report_platform.cSubrata Banik
This patch ensures that all required information for pch/mch/igd deviceid and revision available in single stage and make use of local references. TEST=Build and boot soraka/eve Change-Id: I6f7f219536831210750a486ee3b3308d6f285451 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22756 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-08soc/intel/skylake: Remove pch_enable_dev() from SoCSubrata Banik
PCI resources MMIO space/bus master enabling is handled inside pch_dev_enable_resources() from common device code. Hence no need to have an explicit soc function to do the same. TEST=lspci from kernel console shows same pci device list without and without this patch. Change-Id: I005e486dd435e9c61ae3f5dfe3ff0e8f688d16e1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-08soc/amd/stoneyridge: Add RO_REGION_ONLYMarc Jones
We only need the apu firmware in the RO region when building for ChromeOS. Adding it to the RW regions is a waste of space. BUG=b:70027919 TEST=Build kahlee and use cbfstool to check for "apu/amdfw" sections. Change-Id: Ieafe4a5ec4a5e3177e4e23fcf42afa2626a0b19f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07amd/stoneyridge: Delete early_setup.cRichard Spiegel
All preparation done, early_setup.c now useless. Delete early_setup.c, BUG=b:64033893 TEST=None. Change-Id: Ibe75a2d5cc46641e9d0af462a8a0ba5bb7a0f9c3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22569 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-07amd/stoneyridge/lpc.c: Use new wide IO functionsRichard Spiegel
Use the new wide IO functions from southbridge.c to simplify code in functions set_child_resource and lpc_enable_childrens_resources. BUG=b:64033893 TEST=Boot to OS, check serial output against previously recorded serial output from an image without all 5 related changes. Change-Id: I8533e8ff766df8a8261298559aace7666487826d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07amd/stoneyridge: Create new wide IO functionsRichard Spiegel
Create new generic wide IO functions in southbridge.c. These new functions must be usable by kahlee/ec.c and amd/stoneyridge/lpc.c. BUG=b:64033893 TEST=Just build at this stage, full boot to OS and verify serial output at related change 14fdd03a83. Some extra outputs for testing removed when code was committed. Change-Id: Icd0841a1959f3e109b3c35fa35bb4b3c44099dc3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-07soc/intel/apollolake: add ability to enable eSPIBora Guvendik
Add config option to enable eSPI TEST=Boot to OS Change-Id: Ib4634690fe4fdb902fc0bc074a3b66b91921ddd5 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22320 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-07soc/intel/apollolake: Clean up UART codeAamir Bohra
Clean up and move UART related code under a single uart.c file. Change-Id: I9a30258ba43ee5920f585c1bd06bc25773778ec4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-07soc/intel/skylake: Clean up UART codeAamir Bohra
Clean up and move UART related code under a single uart.c file. Change-Id: I7ed03fc5fe79e38350d7edc70ad55d54db780fed Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-07soc/intel/cannonlake: Make use of Intel common Graphics blockSubrata Banik
TEST=Build and boot cannonlake rvp. Change-Id: Iaa1314ae3fcb4a8a3b55a314e79511f5dcba163d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-07soc/intel/apollolake: Make use of Intel common Graphics blockSubrata Banik
TEST=Build and boot reef. Change-Id: I0edd7454912201598c43e35990e470ec18a32638 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 13:24:08 +0000