summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Expand)Author
2015-04-07exynos5420: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07exynos5250: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07broadwell: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07baytrail: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07kconfig: drop intermittend forwarder filesStefan Reinauer
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
2015-04-06Add predefined __ROMSTAGE__ and __RAMSTAGE__ macrosJulius Werner
2015-04-06tegra132: Add tegra_lp0_resume codeYen Lin
2015-04-06baytrail: Fix hdmi audio choppy issueKein Yuan
2015-04-06baytrail: reinitialize spi controller in SMM finalizationAaron Durbin
2015-04-04build system: rename __BOOT_BLOCK__ and __VER_STAGE__Patrick Georgi
2015-04-04rk3288: set cpu frequency up to 1.8GHzhuang lin
2015-04-04rk3288: guarantee i2c low period more than 1.3ushuang lin
2015-04-04t132: Enable SMMU translationsFurquan Shaikh
2015-04-04tegra132: Store ODMDATA from BCT into PMC scratch for use by kernelTom Warren
2015-04-04tegra132: remove framebuffer reservationAaron Durbin
2015-04-04veyron_pinky/rk3288: Use KHz, MHz and GHz constantsJulius Werner
2015-04-04broadwell: Enable turbo ratio if availableDuncan Laurie
2015-04-04Broadwell: Pass TSC value to romstage_mainLee Leahy
2015-04-04broadwell: fix typo in pei_dataDuncan Laurie
2015-04-04broadwell: Add USB3 PHY tuning fields to PEI DATADuncan Laurie
2015-04-04Baytrail: Fix no_dev_behind_port not executed for RP1/2/3.Kenji Chen
2015-04-04Broadwell: Fix PCIe L1 Sub-State capability ID not filled.Kenji Chen
2015-04-04broadwell: Fix building with USE=quiet-cbDuncan Laurie
2015-04-04tegra124: use known-good drive for fast-train onlyNeil Chen
2015-04-04tegra124: add support for full DP link trainingNeil Chen
2015-04-04rk3288: Replace SPI fifo_size with constantDavid Hendricks
2015-04-04rk3288: Pass SPI bus speed in as parameter to init functionDavid Hendricks
2015-04-03tegra132: implement platform_prog_run()Aaron Durbin
2015-04-03tegra124: implement platform_prog_run()Aaron Durbin
2015-04-03rmodule: use struct prog while loading rmodulesAaron Durbin
2015-04-02pinky: Move some init to mainboard bootblockDavid Hendricks
2015-04-02rk3288/pinky: Move uart address to mainboard KconfigDavid Hendricks
2015-04-02rk3288: remove duplicated #define `PERI_ACLK_DIV_SHIFT`Aaron Durbin
2015-04-02Nyans: replace cpu_reset with hard_resetDaisuke Nojiri
2015-04-02Broadwell: Select PCIE_L1_SUB_STATE and apply Broadwell settings.Kenji Chen
2015-04-02pistachio: add gpio type definitionVadim Bendebury
2015-04-02urara: Fix CBFS header definitionsVadim Bendebury
2015-04-02coreboot: rk3288: add new ddr config and support ddr3 freq up to 800mhzjinkun.hong
2015-04-02rockchip: support pwm regulatorhuang lin
2015-04-02rockchip: support i2c clock settinghuang lin
2015-04-02veyron_pinky: Add rev2 support, clean up mainboard.cJulius Werner
2015-04-02veyron: select rw romstage using vboot2Daisuke Nojiri
2015-04-02broadwell: Disable ADSP power gating feature by defaultDuncan Laurie
2015-04-02broadwell: Add event log entry for GPIO27Duncan Laurie
2015-04-02Broadwell: Reg_Script: add END tag to array "smbus_init_script"Ryan Lin
2015-04-02Broadwell: Synchronize for power management with FRCKenji Chen
2015-04-02Broadwell: Synchronize RO, Link Arbiter, and OBFF with FRCKenji Chen
2015-04-02Broadwell: Revise programming flow for write-once registersKenji Chen
2015-04-02broadwell: Configure IOSF Port and Grant CountKenji Chen
2015-04-02Samus: Synchronization with FRC to enable PCIe Relaxed Order.Kenji Chen
2015-04-02baytrail: Change USB3 PLL VCO and iCLK PLL current on BYT-M/D CPUKein Yuan
2015-04-02broadwell: Update PCIe configuration to follow BWGKane Chen
2015-04-02broadwell: Clear pending GPE events before entering sleep stateDuncan Laurie
2015-04-02Baytrail: Change PCIe root disable algorithmKenji Chen
2015-04-02Baytrail: add _PRT to each PCIe root port deviceTed Kuo
2015-04-02ipq806x: provide soc specific CBMEM_CONSOLE_PRERAM_BASEVadim Bendebury
2015-04-02broadwell: Add reporting of broadwell MCH revisionDuncan Laurie
2015-04-02broadwell: Change CPUID 306D4 to report "E0 or F0"Duncan Laurie
2015-04-02broadwell: me: Fix typo and add missing phase stateDuncan Laurie
2015-04-01cbfs: correct types used for accessing filesAaron Durbin
2015-03-31cbfs: remove cbfs_core.h includesAaron Durbin
2015-03-30broadwell: fix HAVE_REFCODE_BLOB build errorsAaron Durbin
2015-03-30baytrail: fix HAVE_REFCODE_BLOB build errorsAaron Durbin
2015-03-30Update hex values to CBFS binary name types in MakefilesMartin Roth
2015-03-30imgtec/pistachio: Bring uart driver to modern standardsPatrick Georgi
2015-03-28pistachio: don't open code ramstage loadingAaron Durbin
2015-03-28storm: need larger CBFS cacheVadim Bendebury
2015-03-28tegra132: Add support for pmc_rst_status get and printFurquan Shaikh
2015-03-28tegra132: Replace use of clk_rst with CLK_RST_REGFurquan Shaikh
2015-03-28tegra132: measure romstage timingsAaron Durbin
2015-03-28tegra132/rush/ryu: Use CLK_RST_REG instead of &clk_rst->...Furquan Shaikh
2015-03-28tegra132: Clean up clock register writesFurquan Shaikh
2015-03-28Ryu: Move I2C6 init to ramstageTom Warren
2015-03-28Ryu: Rewrite I2C6 mux initTom Warren
2015-03-28tegra132: remove private spin table implementationAaron Durbin
2015-03-28tegra132: Add secmon supportFurquan Shaikh
2015-03-28tegra132: use generic GIC driverAaron Durbin
2015-03-28arm64: Replace CONFIG_* variables with {read/write}_currentFurquan Shaikh
2015-03-28tegra132: update MTS version formattingAaron Durbin
2015-03-28tegra132: remove bring_up_secondary_cpu chip optionAaron Durbin
2015-03-27broadwell: add support for smbios type17 in broadwellKane Chen
2015-03-27rk3288: Add GPIO() macroJulius Werner
2015-03-27rk3288: Add missing #include and use uniform typesDavid Hendricks
2015-03-27soc/imgtec/pistachio: Add IMGTEC SPI controller driverIonela Voinescu
2015-03-27urara: use proper SOC nameVadim Bendebury
2015-03-27tegra132: support arm64 SMP bringupAaron Durbin
2015-03-27tegra132: remove printk() before console_init()Aaron Durbin
2015-03-27tegra132: Fix clock apisFurquan Shaikh
2015-03-27tegra132: Add LPDDR3 SDRAM init in coreboot.Tom Warren
2015-03-27tegra132: return actual plld frequencyAaron Durbin
2015-03-27tegra132: No need for Kconfig variables for stacksFurquan Shaikh
2015-03-27tegra132: add spin table supportAaron Durbin
2015-03-27tegra132: add option to bring up and init secondary cpuAaron Durbin
2015-03-27tegra132: support GIC secondary cpu supportAaron Durbin
2015-03-27arm64: make mmu_enable() use previous ttb from mmu_init()Aaron Durbin
2015-03-27tegra132: select EL3 cpu start up stateAaron Durbin
2015-03-27tegra132: implement smp_processor_id()Aaron Durbin
2015-03-27tegra132: increase MAX_CPUS to 2Aaron Durbin
2015-03-27tegra132: Increase TrustZone Carveout Region sizeFurquan Shaikh