summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Expand)Author
2014-05-06baytrail: Add BCLK and IACORE to pattrsDuncan Laurie
2014-05-06baytrail: Enable Turbo/Burst and set some magic MSRsDuncan Laurie
2014-05-06baytrail: include mainboard's superio.aslAaron Durbin
2014-05-06baytrail: add more irq defintionsAaron Durbin
2014-05-06baytrail: configure acpi SCI irqAaron Durbin
2014-05-06baytrail: add support for S3 resumeAaron Durbin
2014-05-05baytrail: fix up FADTAaron Durbin
2014-05-05baytrail: interrupt routing supportAaron Durbin
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
2014-04-30baytrail: Add default _OSC methodDuncan Laurie
2014-04-30baytrail: Add root bus resource regionsDuncan Laurie
2014-04-30baytrail: Add MCFG table to ACPIDuncan Laurie
2014-04-30baytrail: Clean up NVS regionDuncan Laurie
2014-04-30baytrail: Add function to read top of low memoryDuncan Laurie
2014-04-30baytrail: Add reserved MMIO regions to ACPIDuncan Laurie
2014-04-30baytrail: Fix XHCI problems and re-enableDuncan Laurie
2014-04-09console: Move newline translation outside console_tx_byteKyösti Mälkki
2014-03-20rmodules: use rmodtool to create rmodulesAaron Durbin
2014-03-11baytrail: Reserve memory between ASEG and 1MB and for ramoopsDuncan Laurie
2014-03-11baytrail: Add EHCI initializationDuncan Laurie
2014-03-11baytrail: Add XHCI initializationDuncan Laurie
2014-03-11baytrail: add audio clock workaround for LPEAaron Durbin
2014-03-11baytrail: add ccu iosf access functionsAaron Durbin
2014-03-11baytrail: HDA function disable workaroundAaron Durbin
2014-03-11baytrail: allow function disable on TXEAaron Durbin
2014-03-11baytrail: Switch graphics init to use reg_scriptDuncan Laurie
2014-02-27baytrail: use common code for iosf accessorsAaron Durbin
2014-02-27baytrail: add lpss iosf functions and regsAaron Durbin
2014-02-27baytrail: Fix EHCI function number and XHCI typoDuncan Laurie
2014-02-27baytrail: increment boot count for elogAaron Durbin
2014-02-27baytrail: add GNVS to cbmem and set acpi_slp_typeAaron Durbin
2014-02-27baytrail: fix uninitialized acpi structuresAaron Durbin
2014-02-27baytrail: Add IOSF functions for USBPHY and USHPHYDuncan Laurie
2014-02-27rambi: Enable internal keyboardDuncan Laurie
2014-02-27baytrail: Add SATA driverShawn Nematbakhsh
2014-02-27baytrail: add support for disabling south cluster pci devicesAaron Durbin
2014-02-27baytrail: use MCRX in iosf access functionsAaron Durbin
2014-02-25Remove CACHE_ROM.Vladimir Serbinenko
2014-02-24baytrail: Enable GFX deviceDuncan Laurie
2014-02-24baytrail: IOSF write functions need to set data before controlDuncan Laurie
2014-02-24baytrail: initialize chromeos EC if present in romstageAaron Durbin
2014-02-24baytrail: use version 2 of efi wrapperAaron Durbin
2014-02-24baytrail: remove gfx read_resources() work aroundAaron Durbin
2014-02-24baytrail: get rid of global microcode_ptrAaron Durbin
2014-02-24baytrail: add microcode version 319Aaron Durbin
2014-02-17baytrail: add support to run reference code blobAaron Durbin
2014-02-17baytrail: add south cluster fixed resourcesAaron Durbin
2014-02-17baytrail: enable monotonic timerAaron Durbin
2014-02-16baytrail: SMM supportAaron Durbin
2014-02-16baytrail: bring up APsAaron Durbin
2014-02-16baytrail: Modify GPIO pull-up specification methodShawn Nematbakhsh
2014-02-16baytrail: correct MMC pci locationAaron Durbin
2014-02-16baytrail: fix tsc rateAaron Durbin
2014-02-15coreboot: infrastructure for different ramstage loadersAaron Durbin
2014-02-13baytrail: print dram configurationAaron Durbin
2014-02-13baytrail: allow downstream use of SSE instructionsAaron Durbin
2014-02-13baytrail: add vboot ramstage verificationAaron Durbin
2014-02-12baytrail: gpio: add configs for PU/PD functional pinsShawn Nematbakhsh
2014-02-11baytrail: add reset supportAaron Durbin
2014-02-11rambi: Add ncore GPIO config tablesShawn Nematbakhsh
2014-02-11baytrail: move early init to before mainboardAaron Durbin
2014-02-11baytrail: Add functions to peek at GPIO input valuesShawn Nematbakhsh
2014-02-11baytrail: set max frequency early in romstageAaron Durbin
2014-02-11baytrail: adjust cache policy during romstageAaron Durbin
2014-02-11baytrail: add punit access functionsAaron Durbin
2014-02-11baytrail: make default GPIO configs closer to power-on defaultsShawn Nematbakhsh
2014-02-05baytrail: initialize punitAaron Durbin
2014-02-05baytrail: load microcode in bootblockAaron Durbin
2014-02-05baytrail: disable tco timerAaron Durbin
2014-02-05baytrail: program PUNIT memory-mapped base addressAaron Durbin
2014-02-05baytrail: add 316 microcodeAaron Durbin
2014-02-05baytrail: additional iosf changesAaron Durbin
2014-02-05baytrail: import and use updated mrc_wrapper.hAaron Durbin
2014-02-05baytrail: Rearrange config options alphanumericallyVadim Bendebury
2014-02-05baytrail: start collecting timestampsAaron Durbin
2014-02-03baytrail: Add GPIO initial configuration infrastructure.Shawn Nematbakhsh
2014-02-02Add section header parsing and use it in the mk-payload stepRonald G. Minnich
2014-01-31baytrail: introduce pattrsAaron Durbin
2014-01-31baytrail: add dunit access and registersAaron Durbin
2014-01-31baytrail: set host memory mapAaron Durbin
2014-01-31baytrail: add common pci_operationsAaron Durbin
2014-01-31baytrail: initialize graphics before MRCAaron Durbin
2014-01-31baytrail: cache ROM space early in bootblockAaron Durbin
2014-01-31baytrail: update microcode to version 313Aaron Durbin
2014-01-31baytrail: add initial supportAaron Durbin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 08:31:28 +0000