summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Expand)Author
2014-12-19fsp_baytrail: Initialize LPC pads in bootblock for port 80Martin Roth
2014-12-19fsp_baytrail: Remove GPIO_NC1 #defineMartin Roth
2014-12-19baytrail SOCs: Add missing comma in gpio.hMartin Roth
2014-12-17baytrail: initialize backlight PWM frequencyAaron Durbin
2014-12-17x86: Initialize SPI controller explicitly during PCH initDavid Hendricks
2014-12-17tegra124: modify panel init sequenceKen Chang
2014-12-17nyan*: enable CLAMP_INPUTSKen Chang
2014-12-17fsp_baytrail: Add code to read GPIOs in romstageMartin Roth
2014-12-17ARM: Use LPAE for Virtual Address TranslationDaisuke Nojiri
2014-12-17tegra124: change PLLD VCO calculation algorithmKen Chang
2014-12-16tegra124: Allow "best" PLLD parameters for unmatched pixel clock.Hung-Te Lin
2014-12-16tegra124: Always enable DC when attaching SOR.Hung-Te Lin
2014-12-16nyan*: debug: Add sor registers dump functionJimmy Zhang
2014-12-16tegra124: clock: Enforce PLL constraints for VCO and CFJulius Werner
2014-12-16nyan*: Set SOR_NV_PDISP_SOR_DP_SPARE0 registerJimmy Zhang
2014-12-16nyan*: merge a couple of sor setting difference from kernel driverJimmy Zhang
2014-12-16nyan*: Apply sor fix from kernel dc driverJimmy Zhang
2014-12-16tegra124: Initialize display panel by EDID.Hung-Te Lin
2014-12-16CBMEM console: Fix boards with BROKEN_CAR_MIGRATEKyösti Mälkki
2014-12-16Intel FSP: Move to DYNAMIC_CBMEMKyösti Mälkki
2014-12-16i2c: Replace the i2c API.Gabe Black
2014-12-15tegra124: set MOT bit for I2C-over-AUXKen Chang
2014-12-15tegra124: Setup clock PLLD by approximating display panel pixel clock.Hung-Te Lin
2014-12-15tegra124: Release DMA channel at end of transactionDavid Hendricks
2014-12-15tegra124: Use correct mask for APB bus widthDavid Hendricks
2014-12-15nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.Gabe Black
2014-12-15tegra124: More improvements to the clock initialization macros.Gabe Black
2014-12-15tegra: spi: Read the command1 register to ensure the write to it completes.Gabe Black
2014-12-15tegra124: A couple clock fixes.Gabe Black
2014-12-15tegra124: Add tegra_dc_i2c_aux_read to allow reading EDID.Hung-Te Lin
2014-12-15tegra124: Skip display init when vboot says we don't need it.Gabe Black
2014-12-09spi: Eliminate the spi_cs_activate and spi_cs_deactivate functions.Gabe Black
2014-12-09spi: Remove the spi_set_speed and spi_cs_is_valid functions.Gabe Black
2014-12-09spi: Factor EC protocol details out of the SPI drivers.Gabe Black
2014-12-09UCB RISCV: Switch to DYNAMIC_CBMEMKyösti Mälkki
2014-12-09fsp platfoms: add prototype & consolidate main entry-pointMartin Roth
2014-12-08intel/baytrail: Spelling fixesMartin Roth
2014-12-08intel/fsp_baytrail: Spelling fixesMartin Roth
2014-12-08samsung/exynos5420: Spelling FixesMartin Roth
2014-12-08intel/broadwell: Spelling fixesMartin Roth
2014-12-06soc/qualcomm/ipq806x/Kconfig: Fix indent styleEdward O'Callaghan
2014-12-05fsp_baytrail: Update function disable codeMartin Roth
2014-12-05fsp_baytrail: Kconfig update for Gold 3 FSPMartin Roth
2014-12-05fsp_baytrail: Update microcode for Gold 3 FSP releaseMartin Roth
2014-12-05FSP platform microcode: Update to remove Kconfig variableMartin Roth
2014-12-05ipq8064: Make clock code build in corebootVadim Bendebury
2014-12-05ipq8064: prepare UART driver for use in corebootVadim Bendebury
2014-12-05fsp_baytrail: remove register option for TSEG sizeMartin Roth
2014-12-05fsp_baytrail: update printk to use FSP_INFO_LEVELMartin Roth
2014-12-05fsp_baytrail: update for UPD_DEVICE_CHECK macroMartin Roth
2014-12-05fsp_baytrail: update to add the UPD_MEMDOWN_CHECK macroMartin Roth
2014-12-05fsp_baytrail: update for UPD_SPD_CHECK macroMartin Roth
2014-12-05fsp_baytrail: update to add the UPD_DEFAULT_CHECK macroMartin Roth
2014-12-02Replace hlt with halt()Patrick Georgi
2014-12-01Add UCB RISCV support for architecture, soc, and emulation mainboard..Ronald G. Minnich
2014-12-01Mark non-executable files non-executablePatrick Georgi
2014-11-30Replace hlt() loops with halt()Patrick Georgi
2014-11-28ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
2014-11-25intel: Remove IRQ1 from possible PIRQ assignemnt.Vladimir Serbinenko
2014-11-24intel/fsp_baytrail: add new CPUID for Baytrail I step D0Herve ELter
2014-11-21intel/fsp_baytrail: add Gold3 FSP supportYork Yang
2014-11-20Replace includes of build.h with version.hKyösti Mälkki
2014-11-19broadwell: move to per-device ACPI.Vladimir Serbinenko
2014-11-19fsp_baytrail: Fix ACPI 'Object is not referenced' warningsMartin Roth
2014-11-19fsp_baytrail: Update chip.h UPD entries to match names in fspvpd.hMartin Roth
2014-11-18tegra124: remove spurious error messagePatrick Georgi
2014-11-18tegra124: actually parse is_lvdsPatrick Georgi
2014-11-18baytrail: fix range checkPatrick Georgi
2014-11-14tegra124: allow tegra124 devices to run vboot rmoduleAaron Durbin
2014-11-14tegra124: i2c: Reset the controller when there's an error.Gabe Black
2014-11-14tegra124: fix the dangerous VPR write orderJoseph Lo
2014-11-14tegra124: Add some functions for resetting peripherals.Gabe Black
2014-11-14t124: Clean up display init functionsJimmy Zhang
2014-11-13intel: use crosscompiler readelf, instead of globalPatrick Georgi
2014-11-13arm: Put assembly functions into separate sectionsJulius Werner
2014-11-13ipq8064: Make timer code compileVadim Bendebury
2014-11-13ipq8064: Configure proper bootblock stack and load addressVadim Bendebury
2014-11-13Use sbl blobs from a private locationVadim Bendebury
2014-11-13ipq806x: Add support for GPIO operationsFurquan Shaikh
2014-11-13tegra124: Add a macro specifically for configuring the I2C controller clocks.Gabe Black
2014-11-13tegra124: Fix some bugs in the clock configuration macros.Gabe Black
2014-11-13t124: Skip PLLP init to 408MHzJimmy Zhang
2014-11-13t124: nyan: Enable lock bit on pllJimmy Zhang
2014-11-13tegra124: fix OSC initialization on LP0 resumeAndrew Bresticker
2014-11-13tegra124: fix PLLU parametersAndrew Bresticker
2014-11-13tegra124: Make the PLLX frequency selectable by model.Gabe Black
2014-11-12ipq806x: Typecast address to void * in read/write operationsFurquan Shaikh
2014-11-12ipq806x: Add an include/ folder to ipq806xFurquan Shaikh
2014-11-12Copy u-boot sources as is and modify the tree to still buildVadim Bendebury
2014-11-12Include IPQ8064 SBLs code in the coreboot bootblockVadim Bendebury
2014-11-12tegra124: enable JTAG in Security ModeJimmy Zhang
2014-11-12tegra124: Program PWM1 to drive panel backlightAndrew Chew
2014-11-12tegra124: Add pwm_controller registersAndrew Chew
2014-11-12tegra124: Fix PWM pinmux functionsAndrew Chew
2014-11-12tegra124: Add PWM base addressAndrew Chew
2014-11-12tegra124: nyan: Keep in memory structures below 4GB.Gabe Black
2014-11-10arm: Redesign, clarify and clean up cache related codeJulius Werner
2014-11-09src: Too many terminators ';;' at end of stmts, stop SkynetEdward O'Callaghan
2014-11-09Provide ability to integrate with QComm SBLsVadim Bendebury
2014-11-09arm: Thumb ALL the things!Julius Werner