summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2016-10-09soc/intel/fsp_broadwell_de: Fix system hang when timestamp is enabledYork Yang
When timestamp is enabled, the system hangs because the timestamp data is not yet available. Add a temporary work around that starts the timestamp after the FspInit() making this data available. Verified on Intel Camelback Mountain CRB and ensured that system can boot to payload with timpstamp feature enabled. Change-Id: I59c4bb83ae7e166cceca34988d5a392e5a831afa Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: https://review.coreboot.org/16894 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-09soc/intel/fsp_broadwell_de: Remove the enforced fsp1.0 APIs call sequenceYork Yang
The enforced FSP 1.0 APIs call was used to work around an fsp1.0 driver issue. As the issue has been addressed in fsp1.0 driver (Change 9780), remove the enforced workaround. Otherwise will see error message 'FSP API NotifyPhase failed' in serial log. Verified on Intel Camelback Mountain CRB and confirmed that the serial log error message regarding the 'FSP API NotifyPhase failed' is gone. Change-Id: Iafa1d22e2476769fd841a3ebaa1ab4f9713c6c39 Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: https://review.coreboot.org/16892 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-08rockchip/rk3399: Add Type-C PHY initWilliam wu
Though we don't use Type-C PHY to support USB3 in firmware, we still need to initialize the Type-C PHY, and make sure the power state of pipe is always fixed to U2/P2. After this, we can force USB3 controller to work in USB2 only mode. BRANCH=none BUG=chrome-os-partner:56425 TEST=Go to recovery mode, plug a Type-C USB drive containing chrome OS image into both ports in all orientations, check if system can boot from USB. Change-Id: I95bb96ff27d4fecafb7b2b9e9dc2839b5c132654 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8ec98507845276119d8a9d5626934dedcb35f2dd Original-Change-Id: Ie3654cd1c1cb76b62aa9b247879b60cbecee0155 Original-Signed-off-by: William wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/391412 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16910 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07soc/intel/apollolake: Disable HECI2 device reset on S3 resumeAndrey Petrov
Converged Security Engine (CSE) has a secure variable storage feature. However, this storage is expected to be reset during S3 resume flow. Since coreboot does not use secure storage feature, disable HECI2 reset request. This saves appr. 130ms of resume time. BUG=chrome-os-partner:56941 BRANCH=none TEST=powerd_dbus_suspend; resume; check time with cbmem -t. Note FspMemoryInit time is not significantly different from normal boot time case. Change-Id: I485a980369c6bd97c43b9e554d65ee89e84d8233 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/16870 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-07soc/intel/apollolake: Implement stage cache to improve resume timeBrandon Breitenstein
This patch enables stage cache to save ~40ms during S3 resume. It saves ramstage in the stage cache and restores it on resume so that ramstage does not have to reinitialize during the resume flow. Stage cache functionality is added to postcar stage since ramstage is called from postcar. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for Reef and tested ramstage being cached Change-Id: I1551fd0faca536bd8c8656f0a8ec7f900aae1f72 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16833 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-07Revert "soc/intel/apollolake: Add pmc_ipc device support"Furquan Shaikh
This reverts commit 28821dbb2261267462a7e9b0cc1c23b51af2d3ee. (https://review.coreboot.org/16649) This change causes the kernel to boot really slow. Maybe there is an interrupt storm that prevents the kernel from making any progress. Reverting until the proper kernel dependency is met. BUG=chrome-os-partner:57364 BRANCH=None TEST=Kernels boots to prompt fine on DVT. Change-Id: I1c9913b4476a08303f9dd887b8631601c847dcf7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d7014ee1bb88df7a2d7f6b3dced797fef75b252d Original-Change-Id: I061c0b03b43b516a190b370c04888e73a410fcf1 Original-Signed-off-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/391233 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/16881 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07soc/qualcomm/ipq40xx: Fix GPIO pull up config.Kan Yan
BUG=b:31690391 TEST=Tested with board ID BRANCH=none Change-Id: I9a2b7eec111a79827f72a506942a8ec833ba7e60 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f23e2b6e72491aaafa15774f9bded3e14363abbc Original-Change-Id: I23183db29d7f7dd812e94ab6a1f2f1329c46ac60 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/388778 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org> Reviewed-on: https://review.coreboot.org/16770 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07rockchip/rk3399: Actually remove big CPU initialization from bootblockJulius Werner
CL:377541 was supposed to remove the big CPU cluster initialization from rkclk_init() in the bootblock and move it to a more suitable place in ramstage. Except that next to all the code cleanup I did in that patch, I seem to have forgotten to actually remove that old code. Big thanks to Nico for spotting that in the upstream coreboot review. BRANCH=gru BUG=chrome-os-partner:54906 TEST=Booted Kevin. Change-Id: I09fe948b4587536802b42329b813177439e0804f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 77f9eaf0446b22adfca79d0adf8a0ecfd93c0040 Original-Change-Id: I13dab208225b7e43ad864f2f3cf51b3c104acd4b Original-Reported-by: Nico Huber <nico.h@gmx.de> Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/389236 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16769 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07rockchip/rk3399: select rank before triggering trainingDerek Basehore
This selects the rank to train before training is triggered. This is to prevent any race conditions with the hardware. BRANCH=none BUG=chrome-os-partner:56940 TEST=stressapptest -M 1536 -s 1000 Change-Id: I892bace414cf4495619d41bdaea0c4e91c1e29b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f2dd6f52978a9e54ddd2688eb68fd237aabfe2d Original-Change-Id: I4e7118d8509b59e391d0a254477b5390dfdd43a5 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/387907 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: 云平 汤 <typ@rock-chips.com> Reviewed-on: https://review.coreboot.org/16768 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07rockchip/rk3399: Improve dram stability when run at high frequencyLin Huang
There are two modifications in the driver: 1. Correctly set speeds based on DDR frequency. Control the speeds in the predriver circuits to reduce power. SPEED[1:0] 2'b00:less than 800Mbps(400MHz) 2b01 : 800Mbps(400MHz) to 1600Mbps(800MHz) 2b10 : 1600Mbsp(800MHz) to 2400Mbps(1200MHz) 2b11 : 3200Mbps and greater 2. Configure the number of cycles for the phy clock pll wait time after locking, based on the DDR config file. BRANCH=none BUG=chrome-os-partner:56940 TEST=do memtester on kevin board, and pass Change-Id: Iaf6da59c6c5c290867e0922a2a99de272f4c7bde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 125cf8afac3a682d33896fe74a20ba1d498a3bd2 Original-Change-Id: Iabc17df37a701c4f052540c3c259f209a1db3c59 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/387428 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16722 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-10-06rockchip/rk3399: Configure USB3 controller to work in USB2 only modeLiangfeng Wu
In USB2 only mode, the Type-C PHY will be held in reset and only the USB2 logic of the USB3 OTG controller and PHY will be used over the USB2 pins on the Type-C connector to support Low, Full and High-speed USB operation. BRANCH=none BUG=chrome-os-partner:56425 TEST=Go to recovery mode, plug a Type-C USB drive containing chrome OS image into both ports in all orientations, check if system can boot from USB. Change-Id: Ic265c0c91c24f63b2f9c3106eb2bb277a589233b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a37ccc5b6019967483eac6b5a360d67bc3326e93 Original-Change-Id: I582f04f84eef447ff0ba691ce60e9461ed31cfad Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/385837 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16717 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip: rk3399: improve write leveling flowJianqun Xu
To improve sdram 800MHz and 933MHz stability, we need to modify write leveling flow to get the proper write leveling value. BUG=chrome-os-partner:56940 BRANCH=none TEST=Boot from kevin on 933MHz, and do stressapptest Change-Id: I5b24c93d4a57917fb9af7e5e2a95d8423ccbaa7e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d84bf25b3e5de373c7913e6d534a810cb984b3fd Original-Change-Id: I87efddf628c3683fcb85d6875e029cf3cbc482be Original-Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/384292 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16716 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip/rk3399: Move TTB to the end of SRAMJulius Werner
We found that we may want to load some components of BL31 on the RK3399 into SRAM. As usual, these components may not overlap any coreboot regions still in use at that time, as is already statically checked by the check-ramstage-overlaps rule in Makefile.inc. On RK3399, the only such regions are TTB and STACK. This patch moves the TTB region back to the end of SRAM (right before STACK), so that a large contiguous region of SRAM before that remains usable for BL31. BRANCH=gru BUG=None TEST=Booted Kevin. Change-Id: I1689d0280d79bad805fea5fc3759c2ae3ba24915 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1d4c6c6f6cc0efe97d6962a81e309a1c040d1def Original-Change-Id: I37c94f2460ef63aec4526caabe58f35ae851bab0 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/384635 Original-Reviewed-by: Simon Glass <sjg@google.com> Reviewed-on: https://review.coreboot.org/16714 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip: spi: Add support for 16-bit APB readsSimon Glass
With a SPI clock above about 24MHz the APB cannot keep up when doing individual byte transfers. Adjust the driver to use 16-bit reads when it can, to remove this bottleneck. Any transaction which involves writing bytes still uses 8-bit transfers, to simplify the code. These are the transfers that are not time-critical since they tend to be small. The case that really matters is reading from SPI flash. In general we can use 16-bit reads anytime we are transferring an even number of bytes. If the code detects an odd number of bytes, it tries to perform the operation in two steps: once in 16-bit mode with an even number of bytes, and once in 8-bit mode for the final byte. This allow us to use 16-bit reads even if asked to transfer (for example) 0xf423 bytes. The limit on in_now and out_now is adjusted to 0xfffe to avoid an extra transfer when transferring ~>=64KB. CQ-DEPEND=CL:383232 BUG=chrome-os-partner:56556 BRANCH=none TEST=boot on gru and see that things still work correctly. I tested (with extra debugging) that the 16-bit case is being picked when it should be. Change-Id: If5effae9a84e4de06537fd594bedf7f01d6a9c88 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ec250b4931c7d99cc014e32ab597fca948299d08 Original-Change-Id: Idc5b7e5d82cdbdc1e8fe8b2d6da819edf2d5570c Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381312 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16712 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip: Correct and standardize clock divisor range assertionsJulius Werner
Some of the asserts for valid clock divisor ranges were off by one. This patch corrects them and writes them all in a consistent way. BRANCH=None BUG=None TEST=Booted Kevin. Change-Id: I81749408a40822100797f1734f3b88987d12d8d5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e09cdfde26700496aaa1fc41489f63a355e8a89d Original-Change-Id: I429edb99e2d5ff2302d9750e6569b3d21f5686fa Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381574 Original-Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/16704 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip/rk3399: Move big CPU cluster initialization into ramstageJulius Werner
This patch moves the big CPU cluster initialization on the RK3399 from the clock init bootblock function into ramstage. We're only really doing this to put the cluster into a sane state for the OS, we're never actually taking it out of reset ourselves... so there's no reason to do this so early. Also cleaned up the interface for rkclk_configure_cpu() a bit to make it more readable. BRANCH=None BUG=chrome-os-partner:54906 TEST=Booted Kevin. Change-Id: I568b891da0abb404760d120cef847737c1f9e3ec Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bd7aa7ec3e6d211b17ed61419f80a818cee78919 Original-Change-Id: Ic3d01a51531683b53e17addf1942441663a8ea40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/377541 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16698 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04rockchip: spi: Set rxd sample delay when using high speedSimon Glass
At higher SPI bus speeds the SPI RX value is not available in time for sampling at the normal time. Add a delay to ensure that we read the correct data. The value of 40ns is chosen arbitrarily. In my testing I can use a sample delay of 1 even at 24MHz. But since it is not necessary, I have left that case alone. It kicks in at 25MHz and up. BUG=chrome-os-partner:56556 BRANCH=none TEST=boot on gru and see no change at current speed Change-Id: I3ef335d9a532eaef1e76034bd02e185acf11176a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e9b620c47fc3e39211487507fadb8657afdebee7 Original-Change-Id: I65d66d752cbbbee4d02f475de23a52069a0e9782 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381311 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16707 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-10-04rockchip/rk3399: Fix rkclk_init() to actually use PERILP1_PCLK_HZJulius Werner
This patch fixes a typo in the clock initialization code that caused the PERILP1_PCLK_HZ constant to be ignored and the clock to always run at the same speed as its parent (PERILP1_HCLK_HZ). Since we've done all our previous tests and validation with this bug, we should probably increase the value of the constant (that had not actually been used) to the value that we had been incorrectly using instead (which also makes effective SPI read times faster). BRANCH=None BUG=chrome-os-partner:56556 TEST=Booted Kevin. Change-Id: Ibeb08f5fe5e984a74e3f57e60c62d4bfb644b6ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 06e605a5fcb9bdf13a3d301112380633b892fd4e Original-Change-Id: Icb5e079f53eb22b0dbf0ea4d1c2ff08688e3fa8e Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381031 Original-Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/16703 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04rockchip: Remove pulls for gpio_output(), clean up codeJulius Werner
Output GPIOs should never have a pull-up or pull-down resistor attached since they're actively driven. Since some GPIOs get initialized with a pull at power-on reset, we should explicitly overwrite that setting. Most other platforms do this on gpio_output, but Rockchip hadn't yet. Also, shuffle some code around to make things cleaner and allow for easier code reuse. BRANCH=None BUG=chrome-os-partner:52526 TEST=Booted Kevin. Change-Id: I1425d074ea1e90f4484e1e84a8002b057192c5f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: df5b236bfd58b172435043c1cb792b917a4ec4ab Original-Change-Id: I044266d71ef8bd0518316ff72d829d1ca1e30f35 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/382531 Original-Reviewed-by: Simon Glass <sjg@google.com> Reviewed-on: https://review.coreboot.org/16710 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04rockchip/rk3399: Remove CONFIG_ARM64_A53_ERRATUM_843419Julius Werner
As far as I know, the Cortex-A53 cores in RK3399 are of a newer revision that is not affected by ARM erratum 843419. If it was, the workaround would also need to be enabled in libpayload and Chrome OS userspace, which it currently isn't. I assume this was just incorrectly copied over from another SoC and we can safely remove it. BRANCH=None BUG=chrome-os-partner:56700 TEST=Booted Kevin. Change-Id: I5b1534c954a6d985499b481738723cabbdc07253 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4891cc866583532ee3dcb1a5ad5b81670eb0743d Original-Change-Id: Iadb57428f8727ce0e563204723644e2c79e3007c Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376363 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16702 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-10-01soc/intel/skylake: Add config option for Skylake-H Sku supportTeo Boon Tiong
Change-Id: Ia9c1c065f20bf2b37afc7485ef8df3abd35e2f14 Reviewed-on: https://review.coreboot.org/16607 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01soc/intel/apollolake: Try to update BSP microcode from cbfsMartin Roth
The microcode for the BSP gets loaded early from the fit table, but in case we have newer microcode in cbfs, try to load it again from cbfs. BUG=chrome-os-partner:53013 TEST=Boot and verify that microcode tries to load into the BSP. Change-Id: Ifd6c78d7b0eec333b79e0fe5cb6a81981b078f5d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16829 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-30soc/intel/fsp_broadwell_de/uart: Drop itNico Huber
A copy of our uart8250io driver sneaked in with Broadwell-DE support. The only difference is the lack of initialization (due to FSP handling that). TEST=manually compared resulting object files Change-Id: I09be10b76c76c1306ad2c8db8fb07794dde1b0f2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16786 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30soc/intel/quark: Fix FSP 2.0 buildLee Leahy
Fix the build issues with FSP 2.0: * Remove struct from the various data structures. * Properly display the serial port UPDs. * Change chipset_handle_reset parameter type BRANCH=none BUG=None TEST=Build FSP 2.0 (SEC/PEI core with all FSP debug off) and run on Galileo Gen2 Change-Id: Icae578855006f18e7e5aa18d2fd196d300d0c658 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16808 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-30soc/intel/quark: Support multiple version of FSPLee Leahy
Add support for multiple versions of FSP. BRANCH=none BUG=None TEST=Build FSP 1.1 (SEC/PEI core, with all FSP debug off) and run on Galileo Gen2 Change-Id: Ie7e7f0f883c4d3bfcb18fa25571e505cdde00b2d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16807 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-30mainboard/intel/quark: Add FSP selection valuesLee Leahy
Add Kconfig values to select the FSP setup: * FSP version: 1.1 or 2.0 * Implementation: Subroutine or SEC/PEI core based * Build type: DEBUG or RELEASE * Enable all debugging for FSP * Remove USE_FSP1_1 and USE_FSP2_0 Look for include files in vendorcode/intel/fsp/fsp???/quark BRANCH=none BUG=None TEST=Build FSP 1.1 (subroutine) and run on Galileo Gen2 Change-Id: I3a6cb571021611820263a8cbfe83e69278f50a21 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16806 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-28soc/intel/apollolake: Add pmc_ipc device supportLijian Zhao
A dedicated pmc_ipc DSDT entry is required for pmc_ipc kernel driver. The ACPI mode entry includes resources for PMC_IPC1, SRAM, ACPI IO and Punit Mailbox. BRANCH=None BUG=chrome-os-partner:57364 TEST=Boot up into OS successfully and check with dmesg to see the driver has been loaded successfully without errors. Change-Id: I3f60999ab90962c4ea0a444812e4a7dcce1da5b6 Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16649 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-28soc/intel/apollolake: Use fixed resource for SRAM and IPC1Lijian Zhao
Intel telemetry support will require PMC IPC1 and SRAM devices to be operated in ACPI mode. Then using fixed resources on BAR0, BAR1 and BAR2 (PMC only) for those two devices will help the resource assignment in DSDT stage. BUG=chrome-os-partner:57364 BRANCH=None TEST=Boot up into Chrome OS successfully and check with dmesg to see the driver has been loaded successfully without errors. Change-Id: I8f0983a90728b9148a124ae3443ec29cd7b344ce Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16648 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-26soc/intel/apollolake: provide power button ACPI deviceAaron Durbin
Instead of having each mainboard provide the power button, uncondtionally provide the power button ACPI device on behalf of each mainboard. BUG=chrome-os-partner:56677 Change-Id: I94c9e0353c8d829136f0d52a356286c6bedcddd5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16731 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-22soc/intel/apollolake: Initialize processor count in GNVSDuncan Laurie
Initialize the PCNT variable in GNVS so it is available to ACPI code that expects to know the number of CPUs. Change-Id: I7a6e003ac94218061bf98e8883ed2c62d856af8d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-21soc/apollolake: Correct the comment section in gpio.aslShaunak Saha
This patch corrects the comment section in gpio.asl for GPE method. Change-Id: I45771a295ee1eda00b9699f42cddd120223ff7bf Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16647 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21soc/intel/apollolake: Add function to read and clear GPE statusDuncan Laurie
Implement the generic acpi_get_gpe() function to read and clear the GPE status for a specific GPE. Tested by watching GPE status in a loop while generating interrupts manually from the EC console. BUG=chrome-os-partner:53336 Change-Id: I482ff52051a48441333b573f1cd0fa7f7579a6ab Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16671 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21soc/intel/apollolake: Initialize GPEs in bootblockDuncan Laurie
Initialize the GPEs from mainboard config in bootblock, so they can be used in verstage to query latched interrupt status. I still left it called in ramstage just to be sure that the configuration was not overwritten in FSP stages. Tested by reading and reporting GPE status in a loop in verstage and manually triggering an interrupt on EC console. BUG=chrome-os-partner:53336 Change-Id: Iacd0483e4b3229aca602bb5bb40586eedf35a6ea Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16670 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21Makefiles: update cbfs types from bare numbers to valuesMartin Roth
These values are found in util/cbfstool/cbfs.h. Change-Id: Iea4807b272c0309ac3283e5a3f5e135da6c5eb66 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16646 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20rockchip: spi: Improve SPI read efficiencySimon Glass
The SPI driver is quite slow at reading data. For example, with a 24MHz clock on gru it achieves a read speed of only 13.9Mbps. We can correct this by reading the status registers once, then reading as many bytes as are available before checking the status registers again. It seems likely that a status register read requires synchronizing with the SPI FIFO clock domain, which takes a while. BUG=chrome-os-partner:56556 BRANCH=none TEST=run on gru and see the speed increase from 13.920 Mbps to 24.712 Mbps Change-Id: I24aed0c9c6c5445634c4e056922afaee4e9a7b33 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 49c2fc20d7d7d703763e9b0a6f68313a349a84b9 Original-Change-Id: I42745f01f0fe069f6ae26d866004d36bb257e6b2 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376945 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16582 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru: Add watchdog reset supportJulius Werner
This patch adds support to reboot the whole board after a hardware watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to Veyron. From my tests it looks like both SRAM and PMUSRAM get preserved across warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that makes it easier to deal with in coreboot (PMUSRAM is currently not mapped as cached, so we don't need to worry about flushing the results back before reboot). BRANCH=None BUG=chrome-os-partner:56600 TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30 seconds. Confirm that system reboots correctly without entering recovery and we get a HW watchdog event in the eventlog. Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098 Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/375562 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16578 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19Revert "soc/intel/apollolake: Initialize GPEs in bootblock"Duncan Laurie
This reverts commit 5e3dad66227bba4be9365ee76d00231bb5577b56.
2016-09-19Revert "soc/intel/apollolake: Add function to read and clear GPE status"Duncan Laurie
This reverts commit 3d43a7c111d00be246160a04023fe438ae0cac57.
2016-09-19soc/intel/apollolake: Add function to read and clear GPE statusDuncan Laurie
Implement the generic acpi_get_gpe() function to read and clear the GPE status for a specific GPE. Tested by watching GPE status in a loop while generating interrupts manually from the EC console. BUG=chrome-os-partner:53336 Change-Id: Id885e98d48c2133a868da19eca3360e2dfb82e84 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19soc/intel/apollolake: Initialize GPEs in bootblockDuncan Laurie
Initialize the GPEs from mainboard config in bootblock, so they can be used in verstage to query latched interrupt status. I still left it called in ramstage just to be sure that the configuration was not overwritten in FSP stages. Tested by reading and reporting GPE status in a loop in verstage and manually triggering an interrupt on EC console. BUG=chrome-os-partner:53336 Change-Id: I1af3e9ac1e5c59b9ebb5c6dd1599309c1f036581 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-20gru: Add USB 2.0 PHY tuning for KevinJulius Werner
This patch sets some magic number in magic undocumented registers that are rumored to make USB 2.0 signal integrity better on Kevin. I don't see any difference (unfortunately it doesn't solve the problems with long cables on my board), but I guess it doesn't hurt either way. BRANCH=None BUG=chrome-os-partner:56108,chrome-os-partner:54788 TEST=Booted Kevin with USB connected through Servo. Seems to have roughly the same failure rate as before. Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84 Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/370900 Original-Reviewed-by: Guenter Roeck <groeck@chromium.org> Original-Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-on: https://review.coreboot.org/16265 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19soc/intel/skylake: Add FSP 2.0 support in ramstageNaresh G Solanki
Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19soc/intel/apollolake: Configure ACPI name for PCIeVaibhav Shankar
This implements acpi name for PCIe root port. BUG=chrome-os-partner:56483 Change-Id: Ifec1529c477f554d36f3932b66f62eea782fdcaa Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16621 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: always enable BOOTBLOCK_CONSOLEAaron Durbin
In order to ensure bootblock console output shows up in cbmem console unconditionally select BOOTBLOCK_CONSOLE. BUG=chrome-os-partner:57513 Change-Id: Ie560dd0e7102c79f6db186a11d6f934505bac116 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16622 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: enable postcar consoleAaron Durbin
Unconditionally turn on postcar console for apollolake. BUG=chrome-os-partner:57513 Change-Id: I3d956be4a5834a4721767d34216eebeabef3e315 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16620 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: cache boot media post romstageAaron Durbin
When the boot media is memory mapped mark it as cacheable after romstage. Otherwise the boot media is uncacheable and all loads from it take longer. Loading FSP-S alone in ramstage went down to 17.5ms from 54ms. BUG=chrome-os-partner:56656 Change-Id: I6703334ba8fe98aca26ba1c995d6d3abb0ddef33 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16613 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-15soc/apollolake: Set up GPIO_TIER1_SCI_EN properlyShaunak Saha
Currently we are setting the gpio_tier1_sci in smihandler before going to S3. But this won't work for S0iX as it happens from Linux kernel and SMI handler is not involved in that flow. We need to set this bit i.e. bit 15 in ACPI gpe0a register at 0x430h. The Linux kernel before going to sleep checks what values are passed through ASL as wake events (through _PRW), keeps those enabled only and clears other bits in gpe0 enable registers. So we need to inform the kernel to keep gpio_tier_sci also set as these are needed for any wake event. This patch adds ASL code for sleep button device with HID id PNP0C0E. We are adding _PRW method for sleep button device with this patch. BUG=chrome-os-partner:56483 TEST=System resumes from S3 on lidopen, powerbutton and USB wake. Also from S0iX system is resuming for WIFI wake. Change-Id: Ie8517cad9cd37c25788c22250894d4f9db344ff9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16564 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-15driver/intel/fsp20: move lb_framebuffer functionNaresh G Solanki
move lb_framebuffer function in soc/intel/apollolake to driver/intel/fsp20 so that fsp 2.0 bases soc's can use common lb_framebuffer function. Change-Id: If11bc7faa378a39cf7d4487f9095465a4df84853 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16549 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-15soc/intel/skylake: Add FSP 2.0 support in romstageBarnali Sarkar
Populate SoC related Memory initialization params. Post memory init, set DISB, setup stack and MTRRs using the postcar funtions provided in postcar_loader.c. TEST=Build and boot kunimitsu, dram initialization done. ramstage is loaded. Change-Id: I8d943e29b6e118986189166d92c7891ab6642193 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14lpss_i2c: Add Kconfig option to enable debugDuncan Laurie
It is very useful to have the ability to see I2C transactions performed by the host firmware. This patch adds a simple Kconfig option that will enable debug output. Change-Id: I55f1ff273290e2f4fbfaea56091b2df3fc49fe61 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16590 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-14lpss_i2c: Change handling of controller enable/disableDuncan Laurie
This change modifies the lpss_i2c driver to behave more like the Linux kernel driver. In particular the controller is only enabled when processing a transaction, and is disabled after. This means that errors in one transaction will not affect later transactions. Also when disabling the controller the code is supposed to wait on the enable bit in the "enable status" register and not in the enable control register. In order to get access to this register the reg map was expanded to include all registers. This was tested with the cr50 TPM driver to ensure that if a transaction does fail that it can be successfully retried instead of the bus being unusable. Change-Id: I43a546d54996ba0f08550a801927b8f7a6690cda Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16589 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-14soc/intel/apollolake: Update PL1 value in RAPL MMIO registerSumeet Pawnikar
Due to an incorrect value set for the power limit PL1, the system is not able to leverage full TDP capacity. FSP code sets the PL1 value as 6W in RAPL MMIO register based on fused soc tdp value. This RAPL MMIO register is a physically separate instance from RAPL MSR register. This patch sets PL1 value to 15W in RAPL MMIO register. BUG=chrome-os-partner:56524 TEST=Built, booted on reef and verifed the package power with heavy workload. Change-Id: Ib344247cd8d98ccce7c403e778cd87c13f168ce0 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/16595 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14soc/intel/apollolake: Add PM methods to power gate PCIeVaibhav Shankar
This implements GNVS variable to store the address of PERST_0, _ON/_OFF methods to power gate PCIe during S0ix entry, and PERST_0 assertion/de-assertion methods. BUG=chrome-os-partner:55877 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should resume with PCIE and wifi functional. Change-Id: I9f63ca0b8a6565b6d21deaa6d3dfa34678714c19 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16351 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-14soc/intel/apollolake: initialize GNVS structure to 0Aaron Durbin
The code was not previously initializing the GNVS structure to all 0's in the ACPI write tables path. Fix this and also rearrange the ordering of updating the fields to only handle the chip_info specific bits till last such that most of the structure is filled in prior to bailing out in the case of a bad devicetree. Change-Id: I7bdb305c6b87dac96af35b0c3b7524a17ce53962 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16597 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-13soc/marvell/mvmap2315: Add DDR driverHakim Giydan
This driver is only a prototype driver, real driver will be integrated at a later time. Testing: booted successfully. Change-Id: I372764962e96e5c9c827d524bc369978c5c1fda8 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16554 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add MCU driverHakim Giydan
Testing: booted successfully. Change-Id: I003f6929b00476d46be931773cd35418fe6622a6 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15529 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add WDT driverHakim Giydan
Testing: booted successfully. Change-Id: Ie9c9297f321c838f86e5536aab29f67a0eeb053d Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15519 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add NVM driverHakim Giydan
This driver uses BootROM callback to read and write to the nvm using I2C. Testing: booted successfully. Change-Id: I8639af3e004f6631d7e596507c106159835f979f Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add A2BUS driverHakim Giydan
A2BUS is a custom fabric. Testing: booted successfully. Change-Id: If6e61f5aa30217eb601ac460d9306166b8433569 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15523 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add PMIC driverHakim Giydan
Testing: booted successfully. Change-Id: I168206585f403d2259efe424e563982be661df0b Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16149 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add APMU driverHakim Giydan
APMU is the AP power management unit. It is a separate processor that handles enabling individual power rails. This driver handles sending and receiving commands from/to APMU. Testing: booted successfully. Change-Id: I5ae07849f8432bece8a0ae9066a3f786e6e8d2fe Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15518 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add load_validate driverHakim Giydan
Load_validate: it loads and validates images from flash using hash values stored in the BDB. Testing: booted successfully. Change-Id: I0b00e8c60ed76622d03cb232d5c4273b4077aae7 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16148 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add flash driverHakim Giydan
Testing: booted successfully. Change-Id: Iaeff9f01dbfad7f313aa237e8c71c36c4ed1e06f Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15509 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add gpio driverHakim Giydan
Testing: booted successfully. Change-Id: I89dee1bbf8b68460897f64bf673b328533e70cd4 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15508 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell: Add stub implementation of MVMAP2315 SOCHakim Giydan
Most things still need to be filled in, but this will allow us to build boards which use this SOC. Nvidia Tegra210 SOC and Rochchip Rk3399 SOC has been used as templates to create this directory. Change-Id: I8cc3e99df915bb289a2f3539db103cd6be90a0b2 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15506 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13fsp_broadwell_de: Add Kconfig switch for SERIRQ operation modeWerner Zeh
The serial IRQ (SERIRQ) used by the LPC interface can operate either in continuous or in quiet mode. Add a Kconfig switch to select the desired mode. This switch can now be used on mainboard level to enable the needed mode per mainboard. Change-Id: Ibe246b88164a622f9c71ebe7bab752a083a49a62 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16575 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-12siemens/mc_bdx1: Enable decoding for COM 3 & COM 4 on LPCWerner Zeh
Since this mainboard provides 4 COM ports on LPC, enable decoding of the corresponding addresses using the generic LPC decode registers. Change-Id: I0e93d40dca01d55f3567a18c7ec02269e3bec466 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16535 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-12fsp_broadwell_de: Correct access to SIRQ_CNTL registerWerner Zeh
The serial IRQ configuration register is only 8 bit wide so switch the PCI access from 16 bits to 8 bits. Change-Id: Ia9fbc02251e00b31440bf103e2afc2ff285b7f2e Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16534 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-09soc/intel/apollolake: Add functions to calculate GPIO addressVaibhav Shankar
Provide iosf and GPIO functions for GPIO address calculation. BUG=chrome-os-partner:55877 Change-Id: I6eaa1fcecf5970b365e3418541c75b9866959f7e Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16349 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-08fsp_broadwell_de: Adjust printed address in SPI debug messagesWerner Zeh
For an unknown reason the printed address in the SPI debug messages is modified before it is printed by subtracting the constant 0xf020 from the passed in address. What I suppose this debug code should do is to print the used register address within the SPI controller while any parts of this address that belongs to the SPI base address should be omitted. To fix that remove the subtraction of 0xf020 and adjust the address mask to 0x3ff so that only the offset to the registers inside the SPI controller will be visible in the debug messages. In addition switch to uint8_t and friends over u8 to sync up with used types in this file. Change-Id: I93ba7119873115c7abc80a214cc30363a6930b3b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16500 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-07commonlib: move DIV_ROUND macros from nvidia/tegraArthur Heymans
DIV_ROUND_CLOSEST and DIV_ROUND_UP are useful macros for other architectures. This patch moves them from soc/nvidia/tegra/types.h to commonlib/include/commonlib/helpers.h . Change-Id: I54521d9b197934cef8e352f9a5c4823015d85f01 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16415 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-07soc/apollolake: Enable/disable Audio clk and power gate in devicetree.cbVenkateswarlu Vinjamuri
BUG=chrome-os-partner:56034 Change-Id: Id88d262b32dea468536575117fc34d52076a3096 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/16423 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06fsp_baytrail: Refactor code for SPI debug messagesWerner Zeh
Use the config switch CONFIG_DEBUG_SPI_FLASH on compiler level rather then on preprocessor level to ensure that the code is compiled even if the switch is not selected. In addition the following two changes are introduced: 1. Prepend the debug messages with 'SPI:' to make the output more meaningful. 2. Change the address mask from 0xffff to 0x3ff and remove the subtraction of the constant value 0xf020 in order to print only the register offset within the SPI controller and avoid the visibility of any fragments from SPI base address. 3. Switch to uint8_t and friends instead of u8 to sync up with other code in the same file. Change-Id: Iaf46f29a775039007a402fe862839df06a4cbfaa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16499 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06google/reef: Enable 20K pull ups for LPC CLKRUN and LAD0:3 linesShamile Khan
The pull up for CLKRUN is required to resolve keyboard slowness and malfunctioning observed on some reef systems. The CLKRUN signal was probed and found to be floating when the pull up was not enabled. Also Added pull ups for the LPC Multiplexed command, address and data lines LAD0:3 because the LPC Interface specification requires them. BUG=chrome-os-partner:55586 BRANCH=none TEST=When a key is pressed, the character is immediately visible on the screen. Also the interrupt count for i8042 increments immediately in /proc/interrupts. Change-Id: I16df1a0301a3994c926a609f61291761219f9e01 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/16426 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-04Makefile.inc: Use $(MAINBOARDDIR)Iru Cai
Commit 93ef3ff makes the following only print the part number when the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so use it instead of $(MAINBOARD_DIR). build_complete:: coreboot printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \ $(CONFIG_MAINBOARD_PART_NUMBER) Change-Id: I729a583182937db7a926eb75aa28dfb53360046c Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/16410 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-04lpss_i2c: Increase default timeout to 4msDuncan Laurie
Increase the default timeout in the LPSS I2C driver to 4ms from 2ms. During testing with some slower devices I found that the existing timeout could be too short leading to transaction failures. Change-Id: Ied86c7a0aa26d55b31f447c5938803c194d0045e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16392 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-02apollolake: relocate fsp header files to vendorcodeBrandon Breitenstein
FSP header files should be located in vendorcode, not soc directory. This patch includes changes any references to the old location to the new location. Change-Id: I44270392617418ec1b9dec15ee187863f2503341 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16310 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02drivers/intel/fsp2_0: Make FSP Headers Consumable out of BoxBrandon Breitenstein
The following patch is based off of the UEFI 2.6 patch. The FSP header files are temporarily staying in soc/intel/apollolake and FspUpd.h has been relocated since the other headers expect it to be in the root of an includable directory. Any struct defines were removed since they are defined in the headers and no longer need to be explicity declared as struct with the UEFI 2.6 includes. BUG=chrome-os-partner:54100 BRANCH=none TEST=confirmed coreboot builds successfully Change-Id: I10739dca1b6da3f15bd850adf06238f7c51508f7 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com># Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/16308 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-09-01soc/intel/apollolake: Use consistent convention for community namesFurquan Shaikh
Instead of using a mix of _N and _NORTH, _NW and _NORTHWEST for GPIO community names, follow one single convention. This allows for re-using macros easily. Change-Id: Icd9cf9ef70d03576d864688cf5d6946124c259c3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16353 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31rockchip/rk3399: Add pwm_regulator.c for pwm then ramp boot up cpuEric Gao
Before, we calculate the pwm duties for cpu cores and centerlogic by hand, adding pwm_regulator.c to handle this. The default pwm design min/max voltage may be different between revs. With the pwm regulator, this patch changes the little cpu frequency from 600M to 1512M, and raises CPU voltage to 1.2V correspondingly. This also means we decide to drop the ES1 because it may fail to bootup with 1.5G ~ 1.2v. BRANCH=none BUG=chrome-os-partner:54376,chrome-os-partner:54862 TEST=Bootup on kevin board Change-Id: Id04c176bddfb9cdf3d25b65736e40249a85f6aa1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ee4365c787ec523b7ee1028ea100dcfbb331b3a9 Original-Change-Id: Ide75bbd92d1cbb14f934baeec0e38862bc08402b Original-Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364410 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16368 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31soc/broadcom/cygnus/ddr_init.c: Correct typo in POWER ON and POWER OK.Elyes HAOUAS
Change-Id: I5b69a8429eb2f7add08bc134d5d2366a1afe6a4f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16343 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-31src/soc: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: Ifc47f103492a2cd6c818dfd64be971d34afbe0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16324 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31skylake: Add initial FSP2.0 supportRizwan Qureshi
Add Initial pieces of code to support fsp2.0 in skylake keeping the fsp1.1 flow intact. The soc/romstage.h and soc/ramstage.h have a reference to fsp driver includes, so split these header files for each version of FSP driver. Add the below files, car_stage.S: Add romstage entry point (car_stage_entry). This calls into romstage_fsp20.c and aslo handles the car teardown. romstage_fsp20.c: Call fsp_memory_init() and also has the callback for filling memory init parameters. Also add monotonic_timer.c to verstage. With this patchset and relevant change in kunimitsu mainboard, we are able to boot to romstage. TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1 Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0 Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-31rockchip/rk3399: Move romstage.c to mainboard/gruShunqian Zheng
The romstage.c is more board related than soc specific, like setting the pwm regulators, so moving it to mainboard/gru. BRANCH=none BUG=chrome-os-partner:54819 TEST=Bootup on kevin board Change-Id: I83c6cde9f451480e47e2b4b549cedf65b345134c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 35feeb07131a6a9de4adde035236987391833474 Original-Change-Id: If2bf245302eb4fb20bb089c1b3ffa03909722443 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/375398 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16367 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31soc/intel/apollolake: Disable Periodic Retraining per-SKUAndrey Petrov
Certain LPDDR4 models have some HW issues that can be worked around by turning off Periodic Retraining feature in the memory controller. Add option to disable PR per SKU. BUG=chrome-os-partner:55466 TEST=run RMT test, pass Change-Id: Ie7aa79586665f6d3a7edd854a9eef07e6a1b2ab8 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/16320 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-31soc/intel/apollolake: Update FSP UPD header files for SIC 1.1.3Brandon Breitenstein
Update FSP Header files to provide UPD for periodic training disable. This is for the SIC 1.1.3/150_11 FSP release. BUG=chrome-os-partner:54100 BRANCH=none TEST=built coreboot image with new headers for reef Change-Id: I2ba11aa3d2d664c1d34e39c4c8144fb1c4f2149a Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16352 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-31soc/intel/apollolake: Gather microcode revisionJohn Zhao
Expose get_microcode_info in cpu initialization. Microcode revision is retrieved and stored into log file at verstage. BUG=chrome-os-partner:56544 BRANCH=None TEST=Built coreboot image and validate log file Change-Id: I1e792e70f1318df64b4b85a319700013f3757952 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16311 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-30fsp_broadwell_de: Refactor code for SPI debug messagesWerner Zeh
Currently boards based on fsp_broadwell_de fail to compile if the config switch CONFIG_DEBUG_SPI_FLASH is selected. The error is caused by the usage of const for the address pointer in the functions writeb_, writew_ and writel_. The reason why it stayed hidden for so long is the fact that the switch is used with the preprocessor and nobody really selects it until there is a bug one want to find in this area. This patch fixes the parameter type definition which solves the error. In addition the config switch is not used on preprocessor level anymore but instead on compiler level. This ensures that at least the code syntax is checked on build time even if the config option is not selected. Also prefix the messages with "SPI:" to make them more meaningful in a full log. Change-Id: I3514b0d4c08bf5a4740f2632641e09af1b3aaf3a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16347 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-30soc/intel/skylake: Include Kabylake specific IGD Device IDsBarnali Sarkar
Add Kabylake specific Graphics IDs in report_platform.c and igd.c. BUG=none BRANCH=none TEST=Built and boot kunimitsu Change-Id: I3b810d0ff51eb51d396b783e282779aefb2dcb8c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-30soc/intel/apollolake: add option for SLP_S3_L assertion widthAaron Durbin
In order to provide time for the S0 rails to discharge one needs to be able to set the SLP_S3_L assertion width. The hardware default is 60 microcseconds which is not slow enough on most boards. Therefore provide a devicetree option for the mainboard to set accordingly for its needs. An unset value in devicetree results in a conservative 2 second SLP_S3_L duration. BUG=chrome-os-partner:56581 Change-Id: I6c6df2f7a181746708ab7897249ae82109c55f50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16326 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-08-28soc/intel/apollolake: Add CQOS CAR implementationAndrey Petrov
Add new option to set up Cache-As-RAM by using CQOS, Cache Quality of Service. CQOS allows setting ways of cache in no-fill mode, while keeping other ways in regular evicting mode. This effectively allows using CAR and cache simultaneously. BUG=chrome-os-partner:51959 TEST=switch from NEM to CQOS and back, boot Change-Id: Ic7f9899918f94a5788b02a4fbd2f5d5ba9aaf91d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15455 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28soc/intel/apollolake: Update stage link addresses for 768 KiB cacheAndrey Petrov
Update link addresses for romstage and verstage. Also update FSP-M relocation address. BUG=chrome-os-partner:51959 Change-Id: Ia51a341f05b33151ea5fda9f8620408b5a15bc19 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15454 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28soc/intel/apollolake: Handle CAR sizes other than 1 MiBAndrey Petrov
Since whole L2 (1MiB) is not used, it is possible to shrink CAR size to 768 KiB. Since 768 KiB is not power of two, 2 MTRRs are used to set it up. This is a part of CQOS enabling. BUG=chrome-os-partner:51959 Change-Id: I56326a1790df202a0e428e092dd90286c58763c5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15453 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28src/soc: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I89bc8b26f2dba4770aea14b8bbc7e657355e8c59 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16325 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-27rockchip/rk3399: Enable ramstage compression, shuffle around memlayoutJulius Werner
Since we now have so much more room for activities in our romstage SRAM section, we can easily fit the LZMA decompressor to enable ramstage compression. Also shuffle around memlayout sections a little more to make use of unused space, and balance out leftover memory so that all sections that might need future expansion have a reasonable amount. Change-Id: I47f2d03e520fc3103ef04257b4ba7e93874b8956 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16334 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27gru: Make SDRAM parameters individual struct files in CBFSJulius Werner
This patch changes Gru SDRAM parameters from structures that just get compiled into the romstage to individual CBFS files. This allows us to only load the parameter set we need for the board we're booting from flash, which reduces our boot time and the SRAM memory footprint required to hold the romstage. TEST=Booted Kevin. Change-Id: Ie88a515cbdb19a794ca0a230a56bcc82bed1e550 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16274 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-25soc/intel/apollolake: Enable ELOGBrandon Breitenstein
Add in the base for ELOG for APL. Some PM events still need to be added but the basic events are logged here. This enables the basic functionality of ELOG for Apollolake. BUG=chrome-os-partner:55473 BRANCH=none TEST=Verified image boots on Amenia Change-Id: I8682293e5a55b3efb5fdd9f1be1f3e4bf8d0757c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/15937 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-25intel/common: Clear wake status bits before sleepShaunak Saha
Call power management utility function clear_wake_sts from southbridge_smi_sleep before going to sleep. This is needed to clear the wake status bits in ACPI registers GPE0. BUG=chrome-os-partner:55583 BRANCH=None TEST=Verified that system goes to sleep on lidclose and powerd_dbus_suspend command issued from built-in keyboard. Change-Id: I204a59f8a19137d6a192ea2d89939eefcd5d41ce Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16299 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>