summaryrefslogtreecommitdiff
path: root/src/soc/rockchip
AgeCommit message (Expand)Author
2016-07-25rockchip/rk3399: set CA drive strength to 48ohmsLin Huang
2016-07-19rockchip/rk3399: Remove unused variableMartin Roth
2016-07-18gru: implement hw reset functionVadim Bendebury
2016-07-15rockchip/rk3399: extend romstage rangeLin Huang
2016-07-15rockchip/rk3399: set kevin rev3 pwm regulator initial value to 0.95vLin Huang
2016-07-15rockchip/rk3399: Remove empty function in sdram.cDerek Basehore
2016-07-15rockchip/rk3399: Change copy_to_reg arg typeDerek Basehore
2016-07-15rockchip/rk3399: Directly access variables in sdram.cDerek Basehore
2016-07-15rockchip/rk3399: cleanup variables in dram_all_configDerek Basehore
2016-07-15rockchip/rk3399: add/remove local variables to sdram_initDerek Basehore
2016-07-13rk3399: allow more room for CBMEM consoleVadim Bendebury
2016-07-12rockchip/rk3399: Fix pinctrl pull bias settingsShunqian Zheng
2016-07-12rockchip/rk3399: initialize apll_bLin Huang
2016-07-12rockchip/rk3399: Use apll instead of apll_l defineLin Huang
2016-07-12rockchip/rk3399: calculate clocks based on parent clock speedLin Huang
2016-07-12rockchip/rk3399: Clean up comments in sdram.cDerek Basehore
2016-07-07soc: Remove newline from `CHIP_NAME`Paul Menzel
2016-06-24rk3399: clean up sdram controller initialization codeVadim Bendebury
2016-06-23rockchip/rk3399: fix sdram training issueLin Huang
2016-06-23rockchip/rk3399: Clean up voltage rail settingsLin Huang
2016-06-23rk3399: add definition for SP0 iomuxVadim Bendebury
2016-06-21rockchip: gpio: add macro so we can get gpio numberLin Huang
2016-06-12rockchip: rk3399: pass board specific message to BL31Lin Huang
2016-06-12Kconfig: Set VBOOT_OPROM_MATTERS for relevant non-x86 devicesJulius Werner
2016-06-12rockchip: gru: Add USB DRD DWC3 controller supportLiangfeng Wu
2016-06-08rockchip: rk3399: Add support i2sXing Zheng
2016-06-08gru: kevin: configure board GPIOsVadim Bendebury
2016-06-08rk3399: add ability to configure SPI5Vadim Bendebury
2016-06-07rockchip: gru: update the hynix lpddr3 config to run at 928MHzShunqian Zheng
2016-06-06rk3288: Remove duplicate timestamp_init()Julius Werner
2016-06-03rockchip: gru: enable eDP displayLin Huang
2016-06-03rockchip: rk3399: initialize display for eDPShunqian Zheng
2016-05-18rockchip: rk3399: enable sdhci clk for emmcShunqian Zheng
2016-05-18rockchip: rk3399: configure emmc clkLin Huang
2016-05-18rk3399: add GPIO register definitions for SDMMC0Vadim Bendebury
2016-05-18rockchip: rk3399: improve sdram driverLin Huang
2016-05-18rockchip: rk3399: add tsadc driverShunqian Zheng
2016-05-18rockchip: revert the common tsadc headerShunqian Zheng
2016-05-18rockchip: rk3399: add routines to set vop clocksShunqian Zheng
2016-05-09drivers/uart: Use uart_platform_refclk for all UART modelsLee Leahy
2016-05-09rockchip/rk3399: protect the DRAM address for atfCaesar Wang
2016-05-09rockchip: move vop driver from rk3288 to rockchip commonShunqian Zheng
2016-05-09rockchip/rk3288: Shuffle memlayout to make it fitJulius Werner
2016-05-09google/gru: enable pp1500 and pp3000 rails as soon as possibleVadim Bendebury
2016-05-09rockchip/rk3399: Set all 4 DVFS voltage rails to 1.1V @300kHzVadim Bendebury
2016-05-09rockchip/*: refactor edp driverLin Huang
2016-05-09rockchip/spi: Allow SPI buses > 2Patrick Georgi
2016-05-09rockchip: rk3399: support saradcLin Huang
2016-05-09rockchip: rk3399: enable arm trust firmwareLin Huang
2016-05-09rockchip: make sure sdram top does not spill into MMIO spaceLin Huang
2016-05-09rockchip: rk3399: add sdram driverLin Huang
2016-05-09rockchip: rk3399: init the secure settingShunqian Zheng
2016-05-09rockchip: rk3399: enable pwmLin Huang
2016-05-09rockchip: rk3399: add gpio driverVadim Bendebury
2016-05-09rockchip: refactor gpio driverShunqian Zheng
2016-05-09rockchip: rk3399: add i2c clock driverhuang lin
2016-05-09rockchip: rk3399: add spi clock driverShunqian Zheng
2016-05-09rockchip: rk3399: enable mmuLin Huang
2016-05-09rockchip: rk3399: add functions to configure ddrc freqShunqian Zheng
2016-05-09rockchip: rk3399: support basic clock driverLin Huang
2016-05-09rockchip: rk3399: use static pointers to regs as they compile to faster codeVadim Bendebury
2016-05-09rockchip: rk3399: add the GRF header fileLin Huang
2016-05-09rockchip: rk3399: add simplest sdram to fix compiling errorShunqian Zheng
2016-05-09rockchip/rk*: replace UART special snowflake with standard driverPatrick Georgi
2016-04-16google/gru: Incorporate feedback to #14279Patrick Georgi
2016-04-14src/soc/rockchip: Update license headersMartin Roth
2016-04-13rockchip/common: do not retrieve register pointer twiceVadim Bendebury
2016-04-13rockchip/rk3288: refactor pwm driverLin Huang
2016-04-13rockchip/rk3288: refactor i2c interface to allow support of rk3399huang lin
2016-04-13rockchip/rk3399: Add a stub implementation of the rk3399 SOChuang lin
2016-04-07rockchip: refactor to sharing code among similar SOCsVadim Bendebury
2016-04-07edid: Make framebuffer row alignment configurableJulius Werner
2016-03-24edid: Add helper function to calculate bits-per-pixel dependent valuesJulius Werner
2016-03-16rockchip: update make_idb.pyhuang lin
2016-02-12timestamp: Remove HAS_PRECBMEM_TIMESTAMP_REGION KconfigJulius Werner
2016-02-09rockchip/rk3288: UART uses 32bit wide registersPatrick Georgi
2015-11-18google/veyron*: Pulse the i2c clock once if sda was lowDouglas Anderson
2015-11-11arm/arm64: Generalize bootblock C entry pointJulius Werner
2015-11-10rockchip/rk3288: hdmi: configure display output mode with EDID informationYakir Yang
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-10-29rockchip/rk3288: If we fail to read the EDID 5 times in a row, it's an errorDouglas Anderson
2015-10-25rockchip/rk3288: Remove 1392MHz option for RK3288 APLLDavid Hendricks
2015-10-25rockchip/rk3288: Add 1416MHz as an option for RK3288 APLLDavid Hendricks
2015-10-25rockchip/rk3288: Add 600MHz as an option for RK3288 APLLDavid Hendricks
2015-09-22linking: link bootblock.elf with .data and .bss sections againAaron Durbin
2015-09-09verstage: use common program.ld for linkingAaron Durbin
2015-09-08rk3288: Allow board-specific APLL (CPU clock) settingsDavid Hendricks
2015-09-04bootmode: add display_init_required()Aaron Durbin
2015-08-28rockchip: rk3288: multiple NPLL rate in pll_para_configYakir Yang
2015-08-28rk3288: Set HDMI display mode to 480pYakir Yang
2015-08-28rk3288: Ignore EDID errors for HDMIDavid Hendricks
2015-08-28edid: Use edid_mode struct to reduce redundancyDavid Hendricks
2015-08-28rockchip: rk3288: fix phsync & pvsync bugYakir Yang
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
2015-07-09rk3288: Fix & vs && mix up in hdmi driverStefan Reinauer
2015-07-07rk3288: Use timestamp region for pre-cbmem timestampsFurquan Shaikh
2015-07-06veyron*: Kill SKIP_DISPLAY_INIT_HACKDavid Hendricks
2015-07-06rk3288: Add VOP_MODE_NONE for headless devicesDavid Hendricks
2015-07-06rk3288: Auto-detect display.David Hendricks
2015-07-06rockchip: rk3288: correct ddr 300MHz clock settinghuang lin