aboutsummaryrefslogtreecommitdiff
path: root/src/soc/rockchip/rk3399
AgeCommit message (Collapse)Author
2016-10-07rockchip/rk3399: select rank before triggering trainingDerek Basehore
This selects the rank to train before training is triggered. This is to prevent any race conditions with the hardware. BRANCH=none BUG=chrome-os-partner:56940 TEST=stressapptest -M 1536 -s 1000 Change-Id: I892bace414cf4495619d41bdaea0c4e91c1e29b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f2dd6f52978a9e54ddd2688eb68fd237aabfe2d Original-Change-Id: I4e7118d8509b59e391d0a254477b5390dfdd43a5 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/387907 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: 云平 汤 <typ@rock-chips.com> Reviewed-on: https://review.coreboot.org/16768 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07rockchip/rk3399: Improve dram stability when run at high frequencyLin Huang
There are two modifications in the driver: 1. Correctly set speeds based on DDR frequency. Control the speeds in the predriver circuits to reduce power. SPEED[1:0] 2'b00:less than 800Mbps(400MHz) 2b01 : 800Mbps(400MHz) to 1600Mbps(800MHz) 2b10 : 1600Mbsp(800MHz) to 2400Mbps(1200MHz) 2b11 : 3200Mbps and greater 2. Configure the number of cycles for the phy clock pll wait time after locking, based on the DDR config file. BRANCH=none BUG=chrome-os-partner:56940 TEST=do memtester on kevin board, and pass Change-Id: Iaf6da59c6c5c290867e0922a2a99de272f4c7bde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 125cf8afac3a682d33896fe74a20ba1d498a3bd2 Original-Change-Id: Iabc17df37a701c4f052540c3c259f209a1db3c59 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/387428 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16722 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-10-06rockchip/rk3399: Configure USB3 controller to work in USB2 only modeLiangfeng Wu
In USB2 only mode, the Type-C PHY will be held in reset and only the USB2 logic of the USB3 OTG controller and PHY will be used over the USB2 pins on the Type-C connector to support Low, Full and High-speed USB operation. BRANCH=none BUG=chrome-os-partner:56425 TEST=Go to recovery mode, plug a Type-C USB drive containing chrome OS image into both ports in all orientations, check if system can boot from USB. Change-Id: Ic265c0c91c24f63b2f9c3106eb2bb277a589233b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a37ccc5b6019967483eac6b5a360d67bc3326e93 Original-Change-Id: I582f04f84eef447ff0ba691ce60e9461ed31cfad Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/385837 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16717 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip: rk3399: improve write leveling flowJianqun Xu
To improve sdram 800MHz and 933MHz stability, we need to modify write leveling flow to get the proper write leveling value. BUG=chrome-os-partner:56940 BRANCH=none TEST=Boot from kevin on 933MHz, and do stressapptest Change-Id: I5b24c93d4a57917fb9af7e5e2a95d8423ccbaa7e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d84bf25b3e5de373c7913e6d534a810cb984b3fd Original-Change-Id: I87efddf628c3683fcb85d6875e029cf3cbc482be Original-Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/384292 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16716 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip/rk3399: Move TTB to the end of SRAMJulius Werner
We found that we may want to load some components of BL31 on the RK3399 into SRAM. As usual, these components may not overlap any coreboot regions still in use at that time, as is already statically checked by the check-ramstage-overlaps rule in Makefile.inc. On RK3399, the only such regions are TTB and STACK. This patch moves the TTB region back to the end of SRAM (right before STACK), so that a large contiguous region of SRAM before that remains usable for BL31. BRANCH=gru BUG=None TEST=Booted Kevin. Change-Id: I1689d0280d79bad805fea5fc3759c2ae3ba24915 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1d4c6c6f6cc0efe97d6962a81e309a1c040d1def Original-Change-Id: I37c94f2460ef63aec4526caabe58f35ae851bab0 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/384635 Original-Reviewed-by: Simon Glass <sjg@google.com> Reviewed-on: https://review.coreboot.org/16714 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip: Correct and standardize clock divisor range assertionsJulius Werner
Some of the asserts for valid clock divisor ranges were off by one. This patch corrects them and writes them all in a consistent way. BRANCH=None BUG=None TEST=Booted Kevin. Change-Id: I81749408a40822100797f1734f3b88987d12d8d5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e09cdfde26700496aaa1fc41489f63a355e8a89d Original-Change-Id: I429edb99e2d5ff2302d9750e6569b3d21f5686fa Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381574 Original-Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/16704 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip/rk3399: Move big CPU cluster initialization into ramstageJulius Werner
This patch moves the big CPU cluster initialization on the RK3399 from the clock init bootblock function into ramstage. We're only really doing this to put the cluster into a sane state for the OS, we're never actually taking it out of reset ourselves... so there's no reason to do this so early. Also cleaned up the interface for rkclk_configure_cpu() a bit to make it more readable. BRANCH=None BUG=chrome-os-partner:54906 TEST=Booted Kevin. Change-Id: I568b891da0abb404760d120cef847737c1f9e3ec Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bd7aa7ec3e6d211b17ed61419f80a818cee78919 Original-Change-Id: Ic3d01a51531683b53e17addf1942441663a8ea40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/377541 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16698 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04rockchip/rk3399: Fix rkclk_init() to actually use PERILP1_PCLK_HZJulius Werner
This patch fixes a typo in the clock initialization code that caused the PERILP1_PCLK_HZ constant to be ignored and the clock to always run at the same speed as its parent (PERILP1_HCLK_HZ). Since we've done all our previous tests and validation with this bug, we should probably increase the value of the constant (that had not actually been used) to the value that we had been incorrectly using instead (which also makes effective SPI read times faster). BRANCH=None BUG=chrome-os-partner:56556 TEST=Booted Kevin. Change-Id: Ibeb08f5fe5e984a74e3f57e60c62d4bfb644b6ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 06e605a5fcb9bdf13a3d301112380633b892fd4e Original-Change-Id: Icb5e079f53eb22b0dbf0ea4d1c2ff08688e3fa8e Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381031 Original-Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/16703 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04rockchip: Remove pulls for gpio_output(), clean up codeJulius Werner
Output GPIOs should never have a pull-up or pull-down resistor attached since they're actively driven. Since some GPIOs get initialized with a pull at power-on reset, we should explicitly overwrite that setting. Most other platforms do this on gpio_output, but Rockchip hadn't yet. Also, shuffle some code around to make things cleaner and allow for easier code reuse. BRANCH=None BUG=chrome-os-partner:52526 TEST=Booted Kevin. Change-Id: I1425d074ea1e90f4484e1e84a8002b057192c5f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: df5b236bfd58b172435043c1cb792b917a4ec4ab Original-Change-Id: I044266d71ef8bd0518316ff72d829d1ca1e30f35 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/382531 Original-Reviewed-by: Simon Glass <sjg@google.com> Reviewed-on: https://review.coreboot.org/16710 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04rockchip/rk3399: Remove CONFIG_ARM64_A53_ERRATUM_843419Julius Werner
As far as I know, the Cortex-A53 cores in RK3399 are of a newer revision that is not affected by ARM erratum 843419. If it was, the workaround would also need to be enabled in libpayload and Chrome OS userspace, which it currently isn't. I assume this was just incorrectly copied over from another SoC and we can safely remove it. BRANCH=None BUG=chrome-os-partner:56700 TEST=Booted Kevin. Change-Id: I5b1534c954a6d985499b481738723cabbdc07253 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4891cc866583532ee3dcb1a5ad5b81670eb0743d Original-Change-Id: Iadb57428f8727ce0e563204723644e2c79e3007c Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376363 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16702 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-20gru: Add watchdog reset supportJulius Werner
This patch adds support to reboot the whole board after a hardware watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to Veyron. From my tests it looks like both SRAM and PMUSRAM get preserved across warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that makes it easier to deal with in coreboot (PMUSRAM is currently not mapped as cached, so we don't need to worry about flushing the results back before reboot). BRANCH=None BUG=chrome-os-partner:56600 TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30 seconds. Confirm that system reboots correctly without entering recovery and we get a HW watchdog event in the eventlog. Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098 Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/375562 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16578 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru: Add USB 2.0 PHY tuning for KevinJulius Werner
This patch sets some magic number in magic undocumented registers that are rumored to make USB 2.0 signal integrity better on Kevin. I don't see any difference (unfortunately it doesn't solve the problems with long cables on my board), but I guess it doesn't hurt either way. BRANCH=None BUG=chrome-os-partner:56108,chrome-os-partner:54788 TEST=Booted Kevin with USB connected through Servo. Seems to have roughly the same failure rate as before. Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84 Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/370900 Original-Reviewed-by: Guenter Roeck <groeck@chromium.org> Original-Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-on: https://review.coreboot.org/16265 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-31rockchip/rk3399: Add pwm_regulator.c for pwm then ramp boot up cpuEric Gao
Before, we calculate the pwm duties for cpu cores and centerlogic by hand, adding pwm_regulator.c to handle this. The default pwm design min/max voltage may be different between revs. With the pwm regulator, this patch changes the little cpu frequency from 600M to 1512M, and raises CPU voltage to 1.2V correspondingly. This also means we decide to drop the ES1 because it may fail to bootup with 1.5G ~ 1.2v. BRANCH=none BUG=chrome-os-partner:54376,chrome-os-partner:54862 TEST=Bootup on kevin board Change-Id: Id04c176bddfb9cdf3d25b65736e40249a85f6aa1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ee4365c787ec523b7ee1028ea100dcfbb331b3a9 Original-Change-Id: Ide75bbd92d1cbb14f934baeec0e38862bc08402b Original-Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364410 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16368 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31rockchip/rk3399: Move romstage.c to mainboard/gruShunqian Zheng
The romstage.c is more board related than soc specific, like setting the pwm regulators, so moving it to mainboard/gru. BRANCH=none BUG=chrome-os-partner:54819 TEST=Bootup on kevin board Change-Id: I83c6cde9f451480e47e2b4b549cedf65b345134c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 35feeb07131a6a9de4adde035236987391833474 Original-Change-Id: If2bf245302eb4fb20bb089c1b3ffa03909722443 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/375398 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16367 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27rockchip/rk3399: Enable ramstage compression, shuffle around memlayoutJulius Werner
Since we now have so much more room for activities in our romstage SRAM section, we can easily fit the LZMA decompressor to enable ramstage compression. Also shuffle around memlayout sections a little more to make use of unused space, and balance out leftover memory so that all sections that might need future expansion have a reasonable amount. Change-Id: I47f2d03e520fc3103ef04257b4ba7e93874b8956 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16334 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27gru: Make SDRAM parameters individual struct files in CBFSJulius Werner
This patch changes Gru SDRAM parameters from structures that just get compiled into the romstage to individual CBFS files. This allows us to only load the parameter set we need for the board we're booting from flash, which reduces our boot time and the SRAM memory footprint required to hold the romstage. TEST=Booted Kevin. Change-Id: Ie88a515cbdb19a794ca0a230a56bcc82bed1e550 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16274 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-19rockchip/rk3399 & gru/kevin: support sdram 933MHz on kevinLin Huang
We should be running faster. Faster = better. BRANCH=None BUG=chrome-os-partner:54873 TEST=Boot; stressapptest -M 1028 -s 10000 Change-Id: I7f855960af3142efb71cf9c15edd1da66084e9d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 51bfd2abb1aba839bd0b5b85e9e918f3cc4fd94d Original-Change-Id: Iec9343763c1a5a5344959b6e8c4dee8079cf8a20 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/362822 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16241 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-17google/gru: Add new PWM regulator duty numbers for revision 6Julius Werner
We're changing the PWM regulator bounds on Kevin from rev6 onwards, so we'll need to use different duty cycle values for them. We really want a proper PWM regulator driver that can calculate these values automatically from voltages, but until we have that this patch just hardcodes the new numbers in. (Yes, this is a patch for the mainboard/google/gru board family that only touches a file from the rockchip/rk3399 SoC. That too is something that'll be fixed up in a later CL.) BRANCH=None BUG=chrome-os-partner:54888 TEST=Booted Kevin rev4 (for whatever that's worth...). Change-Id: Ibb6ab5c6517d83ffb5e32cb17d0de33e8ec10293 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4cb2a939295e2b6443c5dbd3374982224322304b Original-Change-Id: I8757cc54f2478d20bb948a1a0a7398b0404a7b1f Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/368410 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16235 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-16Revert "rockchip: rk3399: enable sdhci clk for emmc"Shunqian Zheng
This reverts commit 462e1413 ("rockchip: rk3399: enable sdhci clk for emmc") Enabling this clock in coreboot is no longer needed as it's handled in the kernel driver now. BUG=chrome-os-partner:52873 TEST=boot from usb/sdcard and check there is /dev/mmcblk0 BRANCH=none Change-Id: I92cf51f175fe56a09ab9329b29a27c77ef4328e1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 5707d1269a253dabf825be120d1f9348ffaab6d0 Original-Change-Id: I8bca870c663d8ce8fac5daaaaf8225489f22ed13 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/367421 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16152 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-11rockchip/rk3399: Add code to neuter Type-C PHY for firmware USBJulius Werner
The Rockchip RK3399 integrates a USB Type-C PHY in charge of things like SuperSpeed line muxing for rotated cable orientations in the SoC. While fancy, this is very complicated and we don't want to implement support for the whole thing in firmware. The USB Type-C standard has intentionally been designed in a way that the USB 2.0 (HighSpeed) lines always "just work" in any orientation (by just shorting different pins in the connector together) so that simple use cases like ours can get basic USB functionality without much hassle. However, a semi-configured Type-C PHY can confuse USB 3.0 capable devices into thinking we're actually supporting SuperSpeed, and fail at that rather than establishing a reliable HighSpeed connection. This patch sets enough bits in the Type-C PHY to electrically isolate the SuperSpeed lines from the connector so that the connected device isn't going to get any fancy ideas and reliably falls back to USB 2.0. Also clean up the rest of the USB code while we're at it: avoid writing a few bits that are already in the right state from their reset values anyway, or reading values whose content we already know for this SoC. Rename the USB controllers to the name actually used in the Rockchip documentation (USB OTGx) rather than the name blindly copied from Exynos code (USB DRDx). BRANCH=None BUG=chrome-os-partner:54621 TEST=Plug a USB 3.0 Patriot Memory stick into both ports in all orientations, observe how it gets reliably detected now (safe for some known hardware issues on my board). Change-Id: Ifce6bcddd69f2e8f2e2a2f48faf65551e084da1e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c526906f998bf66067d3addb8b3d3a126c188b1e Original-Change-Id: Ie80a201a58764c4d851fe4a5098a5acfc4bcebdf Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/366160 Original-Reviewed-by: liangfeng wu <wulf@rock-chips.com> Original-Reviewed-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-by: <515506667@qq.com> Reviewed-on: https://review.coreboot.org/16125 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09rockchip/rk3399: sdram: correct read obs and set DQS driver registerLin Huang
We were using the wrong register when reading the obs value and setting the DQS driver. This did not affect LPDDR3 performance, but still needs to be fixed. BUG=none BRANCH=none TEST=boot from kevin Change-Id: I144f575e27fba11872a8c5463ab1e2986f385ede Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 98221e6b03fc09cbf62af29a270e7a8aa8dfb986 Original-Change-Id: Ie179f9a2955c5712951d40b3ada9c14a51c09c8d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/363170 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16052 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-03google/gru: Add code to support I2C TPM for KevinJulius Werner
Coming Kevin revisions will switch back to an I2C TPM. This patch adds the required configuration options and code to support that. Since the TPM type can currently only be changed at compile time, we can no longer support older Kevins with the same image. In order to build for Kevin revisions < 5, you have to explicitly override the CONFIG_GRU_HAS_TPM2. BRANCH=None BUG=chrome-os-partner:55523 TEST=Compiled both Kevin and Gru, confirmed that bootblock and verstage binary had the appropriate code differences. Change-Id: I1b2abe0f331eb103eb0a84f773ee7521d31ae5d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3245bff937154f0f9f39894de9c98a75631d59d9 Original-Change-Id: I81a15c9fb037a7ca2d69818e46cbb4f9a5ae1989 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/364222 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16029 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-07-28rockchip/rk3399: sdram: correct controller vref settingLin Huang
When enabling the controller ODT, the controller vref needs to correspond with the ODT value and DQ drive strength. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Original-Commit-Id: a7251c72b87d9f149b68d086c3252f1c668e0e80 Original-Change-Id: I7e54b3473f68a382208a0fb0b0600552fe6390ad Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358762 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Squashed with: rockchip/rk3399: Halt if we get an invalid odt or drv value When we were pushing the updated sdram.c to coreboot.org, the compiler there found that we were not initializing vref_value_dq in all code possible code paths. This patch updates those code paths to halt the system. Branch=none Bug=none Test=Built with coreboot.org toolchain and verified that the compile errors were gone. Change-Id: I0ad4207dc976236d64b6cdda58d10bcfbe1fde11 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/362726 Reviewed-by: Julius Werner <jwerner@chromium.org> Change-Id: I22a0cef6f12d9aae2ea4dcb99e7ebdd788f2cdd1 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/15812 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-25rockchip/rk3399: set CA drive strength to 48ohmsLin Huang
As shown in testing, if CA use 34.3ohms drive strength, it leads to an overshoot. To fix this, change the drive strength to 48 ohms. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Change-Id: I8666474fc18391da14a3338611f962f2f08f36d0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: fbc1c13f9ab808fc907b2e3f9bde1d09f92980f1 Original-Change-Id: I231f5b1bd45ff262686fbacbaf119a8a57fad27b Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358761 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15811 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-19rockchip/rk3399: Remove unused variableMartin Roth
The 'speed' variable isn't being used after refactoring. Change-Id: Id27a920c61b2bba18d391a7bfefe570235402dec Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/15749 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-18gru: implement hw reset functionVadim Bendebury
Asserting this GPIO will send a signal to the EC to trigger a reset for the AP and the CR50. BRANCH=none BUG=chrome-os-partner:55252 TEST=the device now reboots when it needs to switch between different boot modes instead of hanging with "failed to reboot" message. Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7 Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/360238 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15718 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-15rockchip/rk3399: extend romstage rangeLin Huang
rk3399 sdram size is 192K, and there still some unused space. We need more romstage space to include the sdram config, so extend the romstage range. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Change-Id: Ib827345fe646e985773e6ce3e98ac3f64317fffb Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 626ab15bb4ebb004d5294b948bbdecc77a72a484 Original-Change-Id: Ib5aa1e1b942cde8d9476773f5a84ac70bb830c80 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/359092 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15660 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15rockchip/rk3399: set kevin rev3 pwm regulator initial value to 0.95vLin Huang
kevin rev3 pwm regulator ripple is still not great, especially for center logic. To make sdram at 800MHz stable, raise it to 0.95v. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Change-Id: If4a15eb7398eea8214cb58422bca7cfb5f4a051a Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d29bc581effb0008eb196685aa22dd65b5d478a5 Original-Change-Id: Ideec9c3ab2f919af732719ed2f6a702068d99c8f Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/359130 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15659 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15rockchip/rk3399: Remove empty function in sdram.cDerek Basehore
This removes an empty function for sdram training. If it's needed later, we can always add it back. BRANCH=none BUG=none TEST=build and boot firmware for kevin/gru Change-Id: Id526ef86cf5044894a1a736cc39f10d32f49c072 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3e93461b96bfadc08bf0b46cf99052d9cdffa422 Original-Change-Id: I6bf77d2f81719c68cd78722c3fe9ae547ea1e79c Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354164 Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/15657 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15rockchip/rk3399: Change copy_to_reg arg typeDerek Basehore
This changes the src arg for copy_to_reg to a const u32 * instead of a u32 * in sdram.c. BRANCH=none BUG=none TEST=emerge-gru coreboot Change-Id: I80f49258b2f8102f0d988fec85b8038a00e18a34 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e0342e5c0181bf65ae78aa9518b0d6bd6cb1d5ec Original-Change-Id: I362727f1dbe6726bf3240f9219c394786162a1a0 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354163 Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15656 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15rockchip/rk3399: Directly access variables in sdram.cDerek Basehore
This simplifies some of the code with better variable declaractions which removes a lot of line continuations. Instead of declaring a pointer to the container of the needed struct or array, this retrieves a pointer to the struct or array instead. BRANCH=none BUG=none TEST=check that gru and kevin still build and boot properly followed by running "stressapptest -M 1024 -s 1000" and making sure it passes Change-Id: I34a9be0f35981c03a6b0c27a870981a5f69cecc0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 5c17449fcdfbe83ec75a3a006aaf7393c66006b7 Original-Change-Id: If4e386d4029f17d811fa3ce83e5be89e661a7b11 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354162 Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Original-Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://review.coreboot.org/15655 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15rockchip/rk3399: cleanup variables in dram_all_configDerek Basehore
This removes a variable that was only used once and makes variable declarations consistent by moving those only used in one block of code into that block. BRANCH=none BUG=none TEST=on kevin/gru, run "stressapptest -M 1024 -s 3600" Change-Id: Iacfc0ffef34a4953cfb304b8cb4975b045aea585 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: a79bbbc83d0f5cccf6bb4ad44ae2239c7f4b45e3 Original-Change-Id: Id0ff0c45189c292ab40e1c4aa27929fb7780e864 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/355667 Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15654 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15rockchip/rk3399: add/remove local variables to sdram_initDerek Basehore
This adds two local variables for dramtype and ddr_freq to sdram_init since those two values are commonly used in the function. It also removes a variable that is just used once and directly uses the value for a function call instead. BRANCH=none BUG=none TEST=on kevin/gru, run "stressapptest -M 1024 -s 3600" and check that it passes Change-Id: I4e9dbc97803ff3300b52a5e1672e7e060af2cc85 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: b7d1135c65298a73e6bf2a4a34b7c9b84f249ea8 Original-Change-Id: I4e1a1a4a8848d0eab07475a336c24bda90b2c9f8 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/355666 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15653 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-13rk3399: allow more room for CBMEM consoleVadim Bendebury
With recent bootblock code additions the CBMEM console buffer is not large enough to store the entire log accumulated before DRAM is initialized, spilling 700 bytes or so on the floor. This patch adds 1 KB to the CBMEM console buffer, at the expense of the bootblock area in SRAM. The bootblock is taking less then 26K out of 31K allocated for it after this change. Placing CBMEM console area right after the bootblock makes sure other memory regions are not going to be affected should memory distribution between bootblock and CBMEM console need to change again. BRANCH=none BUG=none TEST=examining /sys/firmware/log after device boots up into Chrome OS does not report truncated console buffer any more. Change-Id: I016460f57c70dab4d603d4c5dbfc5ffbc6c3554f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: bfa31684a1a9be87f39143cb6c07885a7b2e4843 Original-Change-Id: I2c3d198803e6f083ddd1d8447aa377ebf85484ce Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358125 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15607 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-12rockchip/rk3399: Fix pinctrl pull bias settingsShunqian Zheng
The pull bias settings for GPIO0_A, GPIO0_B, GPIO2_C and GPIO2_D are different from the other GPIO banks. This patch adds a callback function to get the GPIO pull value of each SoC(rk3288 and rk3399) so we can still use the common GPIO driver. BRANCH=none BUG=chrome-os-partner:53251 TEST=Jerry and Gru still boot Change-Id: I2a00b7ffd2699190582f5f50a1e21b61c500bf4f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 46d5fa7297693216a2da9bcf15ccce4af796e80e Original-Change-Id: If53f47181bdc235a1ccfefeeb2a77e0eb0e3b1ca Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358110 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15587 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12rockchip/rk3399: initialize apll_bLin Huang
coreboot boots from the little core, and doesn't use the big core for now, but if apll_b is set to the default 24MHz, it will take a long time to enable the big core. This will cause a watchdog crash, so apll_b initialization to 600MHz needs to be done in coreboot. BRANCH=none BUG=chrome-os-partner:54817 TEST=Pick CL:353762 and see big CPU clocks look right TEST=Boot from Gru and see no cpufreq warnings Change-Id: Ie45cd2271555942e4321e9a9e523dc10f63d8107 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: I20b8b591db3171e27740d85edce11f9e8797d849 Original-Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Original-Commit-Id: 16bc916174042620bebe19ae73d241002491aecc Original-Original-Change-Id: Id3487138b383b6643ba7e3ce1eae501a6622da10 Original-Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Original-Reviewed-on: https://chromium-review.googlesource.com/356399 Original-Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15583 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12rockchip/rk3399: Use apll instead of apll_l defineLin Huang
Use the apll define instead of the apll_l define so it can be reused when setting apll_b. BRANCH=None BUG=None TEST=Boot from Gru Change-Id: Iebc4ce3b66a86c33653292340b9855265ac4fc07 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: eb578110d19a35ef04f8749fdc202055abd50fd1 Original-Change-Id: I63966e98af48eaf49837eb0b781eea001a376ef4 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/356398 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/15582 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12rockchip/rk3399: calculate clocks based on parent clock speedLin Huang
Currently aclkm pclkdbg atclk clocks use apll_l as a parent, but the apll_l frequency may change in firmware, so we need to caculate the div value based on the apll_l frequency. BRANCH=None BUG=chrome-os-partner:54376 TEST=Boot from Gru Change-Id: I2bd8886168453ce98efec58b5490c2430762769b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 116ae863a504630e2aff056564836d84198fcae2 Original-Change-Id: I7e3a5d9e3f608ddf15592d893117c92767fcd015 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/356397 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15581 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12rockchip/rk3399: Clean up comments in sdram.cDerek Basehore
Cleans up the comments in sdram.c to make them consistent. BRANCH=none BUG=none TEST=make sure gru/kevin build and boot also, run "stressapptest -M 1024 -s 3600" to make sure it passes Change-Id: I1daf72b847374d549389bacd2fa0a9f8f231b190 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 63a224d6f4b0e4d13bc372c05c4b9196895d553f Original-Change-Id: Iaf8a32cfe2b22c4ccff71952f90d162ad8c2d3e7 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/355665 Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/15579 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-07soc: Remove newline from `CHIP_NAME`Paul Menzel
The name must not terminated with a newline character `\n` as it would make it hard to use it strings. So, remove the newline from the two SoCs with it. Change-Id: I7570442b38a455e7c497d7f461c208fb0a88296d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/15540 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-06-24rk3399: clean up sdram controller initialization codeVadim Bendebury
This is a purely cosmetic change replacing some of the more prominent copy and paste sections of the code with compressed versions of the same. BRANCH=none BUG=none TEST=with the rest of the patches applied stressapptest still runs for an hour on both Kevin and Gru. Change-Id: I492e1898e312473d07d9e5eceb3e3e10b48ee35f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: eb8043f96457d090dbbee57097bc1d685e7d32d2 Original-Change-Id: I362e0e261209ae4d4890ecb0e08bb1956c172ffd Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353774 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15308 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23rockchip/rk3399: fix sdram training issueLin Huang
After write leveling for all ranks, check the PHY_CLK_WRDQS_SLAVE_DELAY result, if the two ranks in one slice both meet (0x200-PHY_CLK_WRDQS_SLAVE_DELAY < 0x20) or (0x200-PHY_CLK_WRDQS_SLAVE > 0x1E0), enable PHY_WRLVL_EARLY_FORCE_ZERO for this slice, and trigger write leveling again. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 1000" and pass Change-Id: I1a0e4e888eb62b5fae5b5e5437a385e8660a246d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 717cbac97b2045f2934e99859ce405aa3637b1c4 Original-Change-Id: Ic0d7c59404e870a7108ed64bbf3215fcc2d0973e Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351825 Reviewed-on: https://review.coreboot.org/15300 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23rockchip/rk3399: Clean up voltage rail settingsLin Huang
The CENTER LOGIC should always be 0.9V and can not be adjusted, so use duty_ns = 2860 to correct CENTER LOGIC to 0.9V. And now DDR seems to run stable at 800MHz on the gru board. BRANCH=none BUG=chrome-os-partner:54144, chrome-os-partner:53208 TEST=run "stressapptest -M 1024 -s 1000" and pass Change-Id: Ia900e248c10ddd0ab630446a324cc0446c0fa49b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f4fb1cefb59ac4099cef8b32a68ed9222e708478 Original-Change-Id: I2238da6c17908d09bc284b321d796901317ed9ef Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/352772 Reviewed-on: https://review.coreboot.org/15297 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23rk3399: add definition for SP0 iomuxVadim Bendebury
This register is described in the TRM in section called GRF_GPIO3D_IOMUX. Added definitions allow to configure the SPI0 interface. BRANCH=none BUG=chrome-os-partner:50645, chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to communicate over SPI0 Change-Id: Ieee3fcae6095020042b02673c7d863f398ed2eb4 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8f155e3b47c9f44ad4e5a2513916572e7d5ec0ab Original-Change-Id: Iea92971b0520dc4549cd0fd263dcb2098f80f6d6 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349851 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/15295 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12rockchip: rk3399: pass board specific message to BL31Lin Huang
Sometimes we need to pass board specific messages to BL31, so that BL31 can do board specific operation based on common code. BRANCH=None BUG=chrome-os-partner:51924 TEST=Build gru Change-Id: I096878699c6e6933debdf2fb3423734f538691ae Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: af83e1b Original-Change-Id: Ib7585ce7d3bf01d3ce53b388bf9bd60f3b65f5f1 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349700 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15116 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12Kconfig: Set VBOOT_OPROM_MATTERS for relevant non-x86 devicesJulius Werner
The VBOOT_OPROM_MATTERS configuration option signals to vboot that the board can skip display initialization in the normal boot path. It's name is a left-over from a time when this could only happen by avoiding loading the VGA option ROM on x86 devices. Now we have other boards that can skip their native display initialization paths too, and the effect to vboot is the same. (Really, we should rename oprom_matters and oprom_loaded to display_skippable and display_initialized or something, but I don't think that's worth the amount of repositories this would need to touch.) The only effect this still has in today's vboot is to reboot and explicitly request display initialization for EC software sync on VBOOT_EC_SLOW_UPDATE devices (which we haven't had yet on ARM). Still, the vboot flag just declares the capability (for skipping display init), and it should be set correctly regardless of whether that actually makes a difference on a given platform (right now). This patch updates all boards/SoCs that have a conditional path based on display_init_required() accordingly. BRANCH=None BUG=chrome-os-partner:51145 TEST=Booted Oak, confirmed that there's no notable boot time impact. Change-Id: Ic7c77dbd8356d67af7aee54e7869f9ac35241b99 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c242f7 Original-Change-Id: I75e5cdda2ba2d111ea50ed2c7cdf94322679f1cd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/348786 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15113 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12rockchip: gru: Add USB DRD DWC3 controller supportLiangfeng Wu
This patch adds code to initialize the two DWC3 USB host controllers, and uses them to initialize USB3.0 on the gru rk3399 board. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB3.0 on gru/kevin rk3399 platform Change-Id: If6a6e56f3a7c7ce8e8b098634cfc2f250a91810d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0306a9e Original-Change-Id: I796fa1133510876f75873d134ea752e1b52e40a8 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/347524 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15112 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08rockchip: rk3399: Add support i2sXing Zheng
This patch enable and configure the clocks and IOMUX for i2s audio path, and the i2s0 clock is from CPLL. Please refer to TRM V0.3 Part 1 Chapter 3 CRU, P126/P128/P144/P154/P155 for the i2s clock div and gate setting. BRANCH=none BUG=chrome-os-partner:52172 TEST=boot kevin rev1, press ctrl+u and hear the beep voice. Change-Id: Id00baac965c8b9213270ba5516e1ca684e4304a6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c58fa7 Original-Change-Id: I130a874a0400712317e5e7a8b3b10a6f04586f68 Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/347526 Original-Commit-Ready: Wonjoon Lee <woojoo.lee@samsung.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15034 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: configure board GPIOsVadim Bendebury
Set board GPIOs as required and add their description into the appropriate section of the coreboot table, to make them available to depthcharge. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to use keyboard on Gru, which indicates that the EC interrupt GPIO is properly configured. The rest of the pins will be verified later. Change-Id: I5818bfe855f4e7faa2114484a9b7b44c7d469727 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e02a05f Original-Change-Id: I82be76bbd3211179e696526a34cc842cb1987e69 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346631 Reviewed-on: https://review.coreboot.org/15031 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08rk3399: add ability to configure SPI5Vadim Bendebury
This defines mux settings for the GPIO bank responsible for SPI interface #5. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to communicate with the EC on gru: pressing Ctrl-U during boot allows to start Chrome OS from the SD card. Change-Id: Ibc2293b5662892f7b275434f9a672ef68edf4f9e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4f92452 Original-Change-Id: Idf55c069b05492f8cdc204a8c273e39a19a3aef3 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346630 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/15030 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-07rockchip: gru: update the hynix lpddr3 config to run at 928MHzShunqian Zheng
Update the DDR config and DRAM driver to allow running at up to 928MHz. Kevin config/clock rate are not being changed, but Gru now runs at 928 MHz. BRANCH=none BUG=chrome-os-partner:51537 TEST=booted Kevin and Gru to Linux prompt. Ran stressapptest for 10 min on Gru, Change-Id: I66c1a171d5c7d05b2878c7bc5eaa0d436c7a1be2 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8baf0d82816a7ea1c4428e15caeefa2795d001f9 Original-Change-Id: I5e1d6d1025f10203da8f11afc3bbdf95f133c586 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/343984 Original-Reviewed-by: Stephen Barber <smbarber@chromium.org> Reviewed-on: https://review.coreboot.org/15027 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03rockchip: gru: enable eDP displayLin Huang
This patch enables eDP display by: o. setting HPD pinmux, backlight, vdd for eDP o. setting vop mode o. enabling VGA configs for edid BRANCH=none BUG=chrome-os-partner:51537 TEST=The dev screen is shown on kevin board Change-Id: If8b07307454daa88727d317cc208d6c97de07ad7 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: b1ad9337510f5437f691153dc68883edf273e4c7 Original-Change-Id: Id7006619b5be638b286a5402d892a5361ac1e430 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340026 Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14858 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03rockchip: rk3399: initialize display for eDPShunqian Zheng
This patch adds functions to init the display. To set up the display, initialize the eDP and read the EDID. Based on these, we then set the clock for VOP, and finally enable VOP and backlight. For a mainboard, it should set the vop_id, vop_mode and framebuffer_bits_per_pixel in devicetree.cb. For VOP_MODE_AUTO_DETECT, it will try eDP first and then HDMI (which is not supported yet). EDIT: Updated Makefile to only build in new files if MAINBOARD_DO_NATIVE_VGA_INIT is enabled. All of these platforms should have it enabled, so this shouldn't make any difference except now, before the platform code is in place. BRANCH=none BUG=chrome-os-partner:51537 TEST=test with the other patch Change-Id: If935415026c945ab6ee128bd6bbdd792890aa24a Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: c1020cc806775629f4d5dc57bd805a9a12169386 Original-Change-Id: Ic32d0a251cb8e08aa5f0b15b2c06c4e02c08a761 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342336 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14857 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-18rockchip: rk3399: enable sdhci clk for emmcShunqian Zheng
If booting from sdcard/usb, kernel can't recognize the /dev/mmcblk0. Before kernel find it's root cause, we add this workaround patch to enable clk for emmc. BRANCH=none BUG=chrome-os-partner:52873 TEST=boot from sdcard and check the /dev/mmcblk0 exists Change-Id: Ie36cc6fdbc24db8c30984c02ccfe2f8aaaf30cd2 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 39b87ec3c73d6f56efc8c3f52b7ed759e548ee85 Original-Change-Id: I88a9cc2e3ea5a56aadfdbd94ef910daaf92a7eb7 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341632 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14856 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: configure emmc clkLin Huang
Select aclk_emmc and clk_emmc source from GPLL, and both to 198MHz, that is GPLL(594MHz) divided by 3. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot kevin rev1 to chromeos prompt from both emmc and sdcard TEST=LoadKernel faster, more than twice as I measured manually. Change-Id: I2580c43b8c79049c3fe16bbf60bfa1a8e0559948 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 5fd37b66dcce77354e1cafab0d6e806d832c08d2 Original-Change-Id: Id22815b302af3204e0e5537af99c1577b09b0877 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/339152 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14855 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rk3399: add GPIO register definitions for SDMMC0Vadim Bendebury
The code needs to be able to set drive strength for the pins used for SDMMC0 interface. This patch adds the definitions for the two registers, as per page 378 of the RK3399 TRM Part 1. Instead of calculation of the reserved range size just use known offsets of the registers included in the structure. BRANCH=none BUG=chrome-os-partner:53257 TEST=with the upcoming driver change it is possible to boot chrome OS on Gru from various micro SD cards which were failing before. Change-Id: I63bf37432ec7f3bdf7e9c6a79d51c31de122dae9 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: c6d6dc5e5e6cc81c173603d4eb21ae803a47815d Original-Change-Id: Ibe7584e77b446435ab1264dcf8fc8bfe0c50438e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/344490 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14852 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: improve sdram driverLin Huang
improve rk3399 sdram drvier, so we can support DDR3, and check the cs training result, so we make sdram work more stable. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot from kevin, do memtester in kernel and pass Change-Id: I508bf26fb8163bab2d725a91ead929df585e04a7 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 4d83a87c459167145b7260f9af5c0380caddc056 Original-Change-Id: Id385f1343804a829b6589f89f4cfbb6565d41417 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/342664 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14849 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: add tsadc driverShunqian Zheng
This patch configures clock for tsadc and then makes it in automatic mode to generate TSHUT when CPU temperature is higer than 120 degree Celsius. BRANCH=none BUG=chrome-os-partner:52382,chrome-os-partner:51537 TEST=Set a lower tshut threshold(45C), run coreboot and check that coreboot reboot again and again. Change-Id: I0b070a059d2941f12d31fc3002e78ea083e70b13 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 05107bd6a3430e31db216c247ff0213e12373390 Original-Change-Id: Iffe54d3b09080d0f1ff31e8b3020d69510f07c95 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342797 Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/14848 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: add routines to set vop clocksShunqian Zheng
Let vop aclk sources from CPLL, and vop dclk from NPLL. The dclk freq is decided by the edid mode pixel_clock which may require high accuracy like 252750KHz. The pll_para_config() can calculate the dividers for PLL to output desired clock. BRANCH=none BUG=chrome-os-partner:51537 TEST=check display with the other patches Change-Id: I12cf27d3d1177a8b1c4cfbd7c0be10204e3d3142 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 0f019b055fffebe9ea3928aae1e25b0ad4feef81 Original-Change-Id: Icef58f87041905961772b69c6b8170d5a866a531 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342335 Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com> Reviewed-on: https://review.coreboot.org/14846 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-09drivers/uart: Use uart_platform_refclk for all UART modelsLee Leahy
Allow the platform to override the input clock for the UART by implementing the routine uart_platform_refclk and setting the Kconfig value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk routine which is disabled when UART_OVERRIDE_REFCLK is selected. This works around ROMCC not supporting weak routines. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14612 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09rockchip/rk3399: protect the DRAM address for atfCaesar Wang
We need ensure the bl31 base is greater than 4KB since there's the shared mem for coreboot. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot to kernel with atf patch Change-Id: I44cf436b3072f03b93da4a19227dcc540d7513db Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a462f604c284c84bd8c5a0420e75eeae5035b382 Original-Change-Id: I55ec134762bb6bcbc91937ad5763617d7488490b Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342334 Original-Commit-Ready: Vadim Bendebury <vbendeb@google.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com> Reviewed-on: https://review.coreboot.org/14741 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: enable pp1500 and pp3000 rails as soon as possibleVadim Bendebury
The idea is that they stay low unless we know that we booted from SPI flash. As this code runs in SPI flash - it is ok to turn these rails on as soon as possible, and pp3000 rail it is essential for UART to work. Kevin rev1 and Gru designs are going to be using these pins to control these rails. Kevin rev1 had those GPIO pins routed to two chip enable signals, it is save to assert them high. BRANCH=none BUG=chrome-os-partner:51537 TEST=kevin rev0 still boots (which does not prove much) TEST=run coreboot on kevin rev1 to kernel Change-Id: I5f3eb4cf5d6f04a0253574dd8b5c039eab0bae1a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 987042246672e9391087dbd5060785a379dde131 Original-Change-Id: I31bb03334ad9e3aa57db726fb43dec85014a3f05 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/341543 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip/rk3399: Set all 4 DVFS voltage rails to 1.1V @300kHzVadim Bendebury
Previous code had several problems: * It was only initting 3 of the 4 voltage rails hooked up to PWM regulators. * It was using a PWM frequency that was out of range. Apparently from testing 300kHz is best. * It was initting all rails to .9V. On my Kevin I needed 1.1V to make booting all 6 cores / rebooting reliable. With this fix both booting all 6 cores in the kernel is reliable (if we tell the kernel not to touch the PWM) and the "reboot" command from Linux userspace is also reliable (previously it crashed in coreboot). NOTES: * Setting all rails to the same voltage doesn't make a lot of sense. We should figure out what these should _actually_ be. Presumably the little CPU rail can be lower, at least. ...and we don't use the GPU in the BIOS so we should set that lower. BRANCH=none BUG=chrome-os-partner:51922 TEST=reboot test Change-Id: I44f6394e43d291cccf3795ad73ee5b21bd949766 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0ac79a7cfb079d23c9d7c4899fdf18c87d05ed0e Original-Change-Id: I80996adefd8542d53ecce59e5233c553700b309f Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/339151 Reviewed-on: https://review.coreboot.org/14727 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: support saradcLin Huang
This patch add functions to configure saradc clk and get saradc's raw value for each channel. Currently add saradc to ramstage. Please refer to TRM V0.3 Part 2 Chapter 18 for this IP. BRANCH=none BUG=chrome-os-partner:51537 TEST=on kevin board, get the raw value 61 for channel 0, measure the ADC_IN0 as 0.109V, 61.0/1024 = 0.05957 0.109V/1.8V = 0.06056 Change-Id: Ic198b2a964ccf8bb687441f0e2702665402fff6e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bc400316de2d75eccad3990a4187bf2dc49a844a Original-Change-Id: I542430ed97bd27f9bfcec89b1d703d9fa390d4e0 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/334177 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14720 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: enable arm trust firmwareLin Huang
BRANCH=none BUG=chrome-os-partner:51537 TEST=kernel is not stuck anymore and can boot into prompt, (testing with others patches) Change-Id: I74bdfa0ce608044a554bb3b06ed17b7157260294 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ca4e7a50c989ae0eff270df4fa160b80a172af31 Original-Change-Id: Id95d5f282ba49981f8e33da029e8710cd4087945 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332561 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14719 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: make sure sdram top does not spill into MMIO spaceLin Huang
The base address of MMIO space is different for different Rockchip SOCs. Define them in the appropriate address map files and use the definition in common code. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I615f3cadd6d5d994b7dd1defbd10d02ad5c994da Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24f941e960e4a2cfb9fc26415f56e240de3d00d9 Original-Change-Id: Ia48d75e7de546b17636cde7829ee09837b9d7ac9 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/337190 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14717 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add sdram driverLin Huang
Add the sdram driver for rk3399. With this patch we can boot into depthcharge. This patch also include a config file for lpddr3-hynix-4GB that generated bases on its datasheet. Please refer to TRM V0.3 Part1 Chapter 9 for DMC. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot to depthcharge on kevin Change-Id: I2afcaa3b68dbad77a5fe677b835289b675ed2bef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5d777e29942057fb7237eefa34051d1f54b19405 Original-Change-Id: Ifa1fe98a7058869518757d50678a64620610d91d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332562 Reviewed-on: https://review.coreboot.org/14716 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: init the secure settingShunqian Zheng
set sdram, sram and all device to non-secure status, so we can free to do mmu operation in coreboot. bl31 will care about secure control. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I11e02246550630c6dfe4e0cbad01e8cd5b83ef1e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ae2df532856110c4d87eb162fd3687f8de27c77f Original-Change-Id: Ia026cf685a9d7bdf7b0c7181b1b325c54bc4554f Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338947 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14715 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: enable pwmLin Huang
Reuse the rockchip common pwm driver. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I1a1ab237f891f06affb74817b5cae1a034a9760e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 37afce0f94435ffef8bdd74b4251430f11ec22f4 Original-Change-Id: Ia94985f56e424d049fdcc5be86c696577d52a07c Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/333255 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add gpio driverVadim Bendebury
Reuse the common gpio driver and implement some stubs in gpio.h. RK3288 has one pmu gpio while RK3399 have two. Please refer to TRM V0.3 Part2 Chapter 11 for GPIO section. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I041865ce269b0ae1f6a07e6c37d53d565a37c5ef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d416ba0ce6a1ff2cf52f6b83ade601d93b40ffeb Original-Change-Id: I1d213a91ea508997b876441250743671204d7c53 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332560 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14713 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add i2c clock driverhuang lin
This patch add i2c clock driver and reuse the common rockchip i2c driver. The i2c0,4,8 src clock from ppll, while i2c1,2,3,5,6,7 from gpll. Please refer to TRM V0.3 Part1 Page 142 for i2c clock setting. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I91822e483244d71798a1c68f14ba0a84f405a665 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 270118e44d159f6a27812fa234b34fe7ac54cbe4 Original-Change-Id: Iea5f4a93cf173e1278166dcb04e19a4ef6c4af04 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/338948 Reviewed-on: https://review.coreboot.org/14711 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add spi clock driverShunqian Zheng
This patch implements spi clock driver and initialize SPI flash rom for the baseboard gru. There are 6 on-chip SPI controllers inside RK3399. For SPI3, it's source clk from ppll, while the others from gpll. Please refer to CRU session of TRM for detail. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I597ae2cc8ba1bfaefdfbf6116027d009daa8e049 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4c6a9b0aedd427727ed4f4a821c5c54fb3a174b9 Original-Change-Id: I68ad859bf4fc5dacaaee5a2cd33418c729cf39b8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338946 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: enable mmuLin Huang
This patch initialize MMU and config mmu ranges for rk3399. During the bootblock phase, mark the max dram size supported(4GiB) as device memory because the mmio space start at 0xF8000000, and _sram as secure memory. After ddr setup in romstage, remark whole dram as cached memory except the _dma_coherent range. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I0cd4abb8c30b73d87d8ba6f964edd42bdf4813fb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fc22ab0c16d8107c217db1629286d5ff1c4bc5b3 Original-Change-Id: I66bfde396036d7a66b29517937a28f0767635066 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332387 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14708 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add functions to configure ddrc freqShunqian Zheng
This patch list four frequencies for ddr controller, 200MHz, 300MHz, 666MHz and 800MHz and configure each freq by setting the DPLL dividers. By default, the clk_ddrc is from DPLL and equals to DPLL, so here we only need to set the DPLL clock. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: Ifabe85b5dc95e3c8e3e9cbf946e12e8b06b881cf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 18ec4f7d8738472fbadd60fa3c8f810f5347ffa2 Original-Change-Id: I448057542c3885068ddffa5b37d0341ee3ec04b1 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/340184 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14707 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: support basic clock driverLin Huang
This patch initialize the PLL clocks and add function to configure cpu freq. Right now, we set the little cpu freq to 600MHz. In coreboot, we currently care about these four PLLs, o. APLL for cpu clk, where A stands for AXI, o. CPLL and GPLL are the generic PLL mainly for peripheral clk, o. PPLL is only PMU clk. For the peripheral clocks, there are thress clocks named as, aclk_perihp, aclk_perilp0, hclk_perilp1, where the 'h' and 'l' letters refer to High and Low speed. As the diagram below, the aclk_perihp always be the parent of more higher speed peripheral devices like pcie, and hclk_perilp1 for spi, i2c, aclk_perilp0 for crypto. These three clocks can choose parent from GPLL or CPLL freely, in this patch, they are all sourced from GPLL. GPLL(594M)/CPLL(384M) APLL(600M for little core) | | `-- aclk_perihp `-- clk_core(600M == APLL) | | | | `-- periph_aclk(148.5M) `-- atclk_core(300M) | `-- periph_hclk(148.5M) `-- aclkm_core(300M) | `-- periph_pclk(37.125M) `-- pclk_dbg_core(100M) | `-- hclk_perilp1 | | | `-- periph_hclk(99M) PPLL(594M) | `-- periph_pclk(49.5M) | | `-- pmu_pclk(99M) `-- aclk_perilp0 | `-- periph_aclk(99M) `-- periph_hclk(99M) `-- periph_pclk(49.5M) BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I1c46ff17e6b466529244afb41d7fd4abbcfd3da4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9f0d31177336a3450577950426f9cc9d56e2254c Original-Change-Id: I4ad00df3e406bd0a7576287d6e62b8993a8c2d02 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332386 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14706 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: use static pointers to regs as they compile to faster codeVadim Bendebury
Quoting an earlier review comment, using static structures pointers in the include file "should allow the compiler to optimize accesses better than defining it in a separate compilation unit (by being able to constant fold stuff like &rk3399_pmusgrf->field into a single address, rather than loading the symbol, loading an offset constant and adding)". Any decent compiler linker system nowadays would consolidate this definition in any case. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied Kevin successfully boots Linux kernel. Change-Id: Ibb576c7691a30f2f429651fcca133bd72710c13b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89b6f22e37f733667156f15afb8c27d8a9f07512 Original-Change-Id: Ice8d6d766a91e7f4fce553378a23b9ca593d12dd Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/339869 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14705 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add the GRF header fileLin Huang
The GRF(general register file) of rk3399 is divided into two sections, o. GRF, used for general non-secure system o. PMUGRF, used for always-on syosyem This patch defines the registers used for iomux/gpio/system control. BRANCH=none BUG=none TEST=emerge-kevin coreboot Change-Id: I3239793523e0f55f6661ef029c3dac9970990fb8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 897d01573ea2bbe2b3091358ec3c9728ee82f8ec Original-Change-Id: I4c228ddb60c9c4056de50312dc269227fac9a7fa Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332388 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14704 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add simplest sdram to fix compiling errorShunqian Zheng
This patch is only to make building happy, the real sdram driver comes later. BRANCH=none BUG=none TEST=emerge-kevin coreboot Change-Id: I4123c3a6627d7264c615fefbb89e16c4dfb9a423 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5b992a7895a72c83f57228d3abd1ae37d55e7e7b Original-Change-Id: Ie340877e828ae760169ccfa9a7099e7472d2fc26 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338944 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14703 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip/rk*: replace UART special snowflake with standard driverPatrick Georgi
The standard uart8250mem_32 driver is now usable on ARM, so use it. BUG=none BRANCH=none TEST=see that serial firmware builds still log on serial in all stages on veyron_minnie. Also verified that a 9600 baud console is functional. Change-Id: I653b70a0d51a8d136e1da17537988f5b33c7a160 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fa27c60fd38002775072d11fca431d4788b4d1d7 Original-Change-Id: I047d74ac2d5c311f303955e62391114e16ec087a Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/337551 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14319 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-16google/gru: Incorporate feedback to #14279Patrick Georgi
To avoid diverging too much on an actively developed code base, keep the changes to a separate commit that can be downstreamed more easily: - removed unused includes - gave kevin board a "Kevin" part number - marked RW_LEGACY as CBFS region (to follow up upstream changes) - moved romstage entry point to SoC code (instead of encouraging per-board copy pasta) Change-Id: Ief0c8db3c4af96fe2be2e2397d8874ad06fb6f1f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14362 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-13rockchip/rk3399: Add a stub implementation of the rk3399 SOChuang lin
Most things still need to be filled in, but this will allow us to build boards which use this SOC. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied Kevin board can be booted to Linux login propmt. Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840 Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332385 Reviewed-on: https://review.coreboot.org/13915 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-06 02:23:01 +0000