aboutsummaryrefslogtreecommitdiff
path: root/src/soc/rockchip/rk3399
AgeCommit message (Collapse)Author
2016-06-23rockchip/rk3399: Clean up voltage rail settingsLin Huang
The CENTER LOGIC should always be 0.9V and can not be adjusted, so use duty_ns = 2860 to correct CENTER LOGIC to 0.9V. And now DDR seems to run stable at 800MHz on the gru board. BRANCH=none BUG=chrome-os-partner:54144, chrome-os-partner:53208 TEST=run "stressapptest -M 1024 -s 1000" and pass Change-Id: Ia900e248c10ddd0ab630446a324cc0446c0fa49b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f4fb1cefb59ac4099cef8b32a68ed9222e708478 Original-Change-Id: I2238da6c17908d09bc284b321d796901317ed9ef Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/352772 Reviewed-on: https://review.coreboot.org/15297 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23rk3399: add definition for SP0 iomuxVadim Bendebury
This register is described in the TRM in section called GRF_GPIO3D_IOMUX. Added definitions allow to configure the SPI0 interface. BRANCH=none BUG=chrome-os-partner:50645, chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to communicate over SPI0 Change-Id: Ieee3fcae6095020042b02673c7d863f398ed2eb4 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8f155e3b47c9f44ad4e5a2513916572e7d5ec0ab Original-Change-Id: Iea92971b0520dc4549cd0fd263dcb2098f80f6d6 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349851 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/15295 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12rockchip: rk3399: pass board specific message to BL31Lin Huang
Sometimes we need to pass board specific messages to BL31, so that BL31 can do board specific operation based on common code. BRANCH=None BUG=chrome-os-partner:51924 TEST=Build gru Change-Id: I096878699c6e6933debdf2fb3423734f538691ae Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: af83e1b Original-Change-Id: Ib7585ce7d3bf01d3ce53b388bf9bd60f3b65f5f1 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349700 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15116 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12Kconfig: Set VBOOT_OPROM_MATTERS for relevant non-x86 devicesJulius Werner
The VBOOT_OPROM_MATTERS configuration option signals to vboot that the board can skip display initialization in the normal boot path. It's name is a left-over from a time when this could only happen by avoiding loading the VGA option ROM on x86 devices. Now we have other boards that can skip their native display initialization paths too, and the effect to vboot is the same. (Really, we should rename oprom_matters and oprom_loaded to display_skippable and display_initialized or something, but I don't think that's worth the amount of repositories this would need to touch.) The only effect this still has in today's vboot is to reboot and explicitly request display initialization for EC software sync on VBOOT_EC_SLOW_UPDATE devices (which we haven't had yet on ARM). Still, the vboot flag just declares the capability (for skipping display init), and it should be set correctly regardless of whether that actually makes a difference on a given platform (right now). This patch updates all boards/SoCs that have a conditional path based on display_init_required() accordingly. BRANCH=None BUG=chrome-os-partner:51145 TEST=Booted Oak, confirmed that there's no notable boot time impact. Change-Id: Ic7c77dbd8356d67af7aee54e7869f9ac35241b99 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c242f7 Original-Change-Id: I75e5cdda2ba2d111ea50ed2c7cdf94322679f1cd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/348786 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15113 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12rockchip: gru: Add USB DRD DWC3 controller supportLiangfeng Wu
This patch adds code to initialize the two DWC3 USB host controllers, and uses them to initialize USB3.0 on the gru rk3399 board. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB3.0 on gru/kevin rk3399 platform Change-Id: If6a6e56f3a7c7ce8e8b098634cfc2f250a91810d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0306a9e Original-Change-Id: I796fa1133510876f75873d134ea752e1b52e40a8 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/347524 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15112 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08rockchip: rk3399: Add support i2sXing Zheng
This patch enable and configure the clocks and IOMUX for i2s audio path, and the i2s0 clock is from CPLL. Please refer to TRM V0.3 Part 1 Chapter 3 CRU, P126/P128/P144/P154/P155 for the i2s clock div and gate setting. BRANCH=none BUG=chrome-os-partner:52172 TEST=boot kevin rev1, press ctrl+u and hear the beep voice. Change-Id: Id00baac965c8b9213270ba5516e1ca684e4304a6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c58fa7 Original-Change-Id: I130a874a0400712317e5e7a8b3b10a6f04586f68 Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/347526 Original-Commit-Ready: Wonjoon Lee <woojoo.lee@samsung.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15034 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: configure board GPIOsVadim Bendebury
Set board GPIOs as required and add their description into the appropriate section of the coreboot table, to make them available to depthcharge. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to use keyboard on Gru, which indicates that the EC interrupt GPIO is properly configured. The rest of the pins will be verified later. Change-Id: I5818bfe855f4e7faa2114484a9b7b44c7d469727 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e02a05f Original-Change-Id: I82be76bbd3211179e696526a34cc842cb1987e69 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346631 Reviewed-on: https://review.coreboot.org/15031 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08rk3399: add ability to configure SPI5Vadim Bendebury
This defines mux settings for the GPIO bank responsible for SPI interface #5. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to communicate with the EC on gru: pressing Ctrl-U during boot allows to start Chrome OS from the SD card. Change-Id: Ibc2293b5662892f7b275434f9a672ef68edf4f9e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4f92452 Original-Change-Id: Idf55c069b05492f8cdc204a8c273e39a19a3aef3 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346630 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/15030 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-07rockchip: gru: update the hynix lpddr3 config to run at 928MHzShunqian Zheng
Update the DDR config and DRAM driver to allow running at up to 928MHz. Kevin config/clock rate are not being changed, but Gru now runs at 928 MHz. BRANCH=none BUG=chrome-os-partner:51537 TEST=booted Kevin and Gru to Linux prompt. Ran stressapptest for 10 min on Gru, Change-Id: I66c1a171d5c7d05b2878c7bc5eaa0d436c7a1be2 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8baf0d82816a7ea1c4428e15caeefa2795d001f9 Original-Change-Id: I5e1d6d1025f10203da8f11afc3bbdf95f133c586 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/343984 Original-Reviewed-by: Stephen Barber <smbarber@chromium.org> Reviewed-on: https://review.coreboot.org/15027 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03rockchip: gru: enable eDP displayLin Huang
This patch enables eDP display by: o. setting HPD pinmux, backlight, vdd for eDP o. setting vop mode o. enabling VGA configs for edid BRANCH=none BUG=chrome-os-partner:51537 TEST=The dev screen is shown on kevin board Change-Id: If8b07307454daa88727d317cc208d6c97de07ad7 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: b1ad9337510f5437f691153dc68883edf273e4c7 Original-Change-Id: Id7006619b5be638b286a5402d892a5361ac1e430 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340026 Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14858 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03rockchip: rk3399: initialize display for eDPShunqian Zheng
This patch adds functions to init the display. To set up the display, initialize the eDP and read the EDID. Based on these, we then set the clock for VOP, and finally enable VOP and backlight. For a mainboard, it should set the vop_id, vop_mode and framebuffer_bits_per_pixel in devicetree.cb. For VOP_MODE_AUTO_DETECT, it will try eDP first and then HDMI (which is not supported yet). EDIT: Updated Makefile to only build in new files if MAINBOARD_DO_NATIVE_VGA_INIT is enabled. All of these platforms should have it enabled, so this shouldn't make any difference except now, before the platform code is in place. BRANCH=none BUG=chrome-os-partner:51537 TEST=test with the other patch Change-Id: If935415026c945ab6ee128bd6bbdd792890aa24a Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: c1020cc806775629f4d5dc57bd805a9a12169386 Original-Change-Id: Ic32d0a251cb8e08aa5f0b15b2c06c4e02c08a761 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342336 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14857 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-18rockchip: rk3399: enable sdhci clk for emmcShunqian Zheng
If booting from sdcard/usb, kernel can't recognize the /dev/mmcblk0. Before kernel find it's root cause, we add this workaround patch to enable clk for emmc. BRANCH=none BUG=chrome-os-partner:52873 TEST=boot from sdcard and check the /dev/mmcblk0 exists Change-Id: Ie36cc6fdbc24db8c30984c02ccfe2f8aaaf30cd2 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 39b87ec3c73d6f56efc8c3f52b7ed759e548ee85 Original-Change-Id: I88a9cc2e3ea5a56aadfdbd94ef910daaf92a7eb7 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341632 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14856 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: configure emmc clkLin Huang
Select aclk_emmc and clk_emmc source from GPLL, and both to 198MHz, that is GPLL(594MHz) divided by 3. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot kevin rev1 to chromeos prompt from both emmc and sdcard TEST=LoadKernel faster, more than twice as I measured manually. Change-Id: I2580c43b8c79049c3fe16bbf60bfa1a8e0559948 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 5fd37b66dcce77354e1cafab0d6e806d832c08d2 Original-Change-Id: Id22815b302af3204e0e5537af99c1577b09b0877 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/339152 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14855 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rk3399: add GPIO register definitions for SDMMC0Vadim Bendebury
The code needs to be able to set drive strength for the pins used for SDMMC0 interface. This patch adds the definitions for the two registers, as per page 378 of the RK3399 TRM Part 1. Instead of calculation of the reserved range size just use known offsets of the registers included in the structure. BRANCH=none BUG=chrome-os-partner:53257 TEST=with the upcoming driver change it is possible to boot chrome OS on Gru from various micro SD cards which were failing before. Change-Id: I63bf37432ec7f3bdf7e9c6a79d51c31de122dae9 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: c6d6dc5e5e6cc81c173603d4eb21ae803a47815d Original-Change-Id: Ibe7584e77b446435ab1264dcf8fc8bfe0c50438e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/344490 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14852 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: improve sdram driverLin Huang
improve rk3399 sdram drvier, so we can support DDR3, and check the cs training result, so we make sdram work more stable. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot from kevin, do memtester in kernel and pass Change-Id: I508bf26fb8163bab2d725a91ead929df585e04a7 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 4d83a87c459167145b7260f9af5c0380caddc056 Original-Change-Id: Id385f1343804a829b6589f89f4cfbb6565d41417 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/342664 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14849 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: add tsadc driverShunqian Zheng
This patch configures clock for tsadc and then makes it in automatic mode to generate TSHUT when CPU temperature is higer than 120 degree Celsius. BRANCH=none BUG=chrome-os-partner:52382,chrome-os-partner:51537 TEST=Set a lower tshut threshold(45C), run coreboot and check that coreboot reboot again and again. Change-Id: I0b070a059d2941f12d31fc3002e78ea083e70b13 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 05107bd6a3430e31db216c247ff0213e12373390 Original-Change-Id: Iffe54d3b09080d0f1ff31e8b3020d69510f07c95 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342797 Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/14848 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: add routines to set vop clocksShunqian Zheng
Let vop aclk sources from CPLL, and vop dclk from NPLL. The dclk freq is decided by the edid mode pixel_clock which may require high accuracy like 252750KHz. The pll_para_config() can calculate the dividers for PLL to output desired clock. BRANCH=none BUG=chrome-os-partner:51537 TEST=check display with the other patches Change-Id: I12cf27d3d1177a8b1c4cfbd7c0be10204e3d3142 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 0f019b055fffebe9ea3928aae1e25b0ad4feef81 Original-Change-Id: Icef58f87041905961772b69c6b8170d5a866a531 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342335 Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com> Reviewed-on: https://review.coreboot.org/14846 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-09drivers/uart: Use uart_platform_refclk for all UART modelsLee Leahy
Allow the platform to override the input clock for the UART by implementing the routine uart_platform_refclk and setting the Kconfig value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk routine which is disabled when UART_OVERRIDE_REFCLK is selected. This works around ROMCC not supporting weak routines. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14612 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09rockchip/rk3399: protect the DRAM address for atfCaesar Wang
We need ensure the bl31 base is greater than 4KB since there's the shared mem for coreboot. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot to kernel with atf patch Change-Id: I44cf436b3072f03b93da4a19227dcc540d7513db Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a462f604c284c84bd8c5a0420e75eeae5035b382 Original-Change-Id: I55ec134762bb6bcbc91937ad5763617d7488490b Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342334 Original-Commit-Ready: Vadim Bendebury <vbendeb@google.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com> Reviewed-on: https://review.coreboot.org/14741 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: enable pp1500 and pp3000 rails as soon as possibleVadim Bendebury
The idea is that they stay low unless we know that we booted from SPI flash. As this code runs in SPI flash - it is ok to turn these rails on as soon as possible, and pp3000 rail it is essential for UART to work. Kevin rev1 and Gru designs are going to be using these pins to control these rails. Kevin rev1 had those GPIO pins routed to two chip enable signals, it is save to assert them high. BRANCH=none BUG=chrome-os-partner:51537 TEST=kevin rev0 still boots (which does not prove much) TEST=run coreboot on kevin rev1 to kernel Change-Id: I5f3eb4cf5d6f04a0253574dd8b5c039eab0bae1a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 987042246672e9391087dbd5060785a379dde131 Original-Change-Id: I31bb03334ad9e3aa57db726fb43dec85014a3f05 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/341543 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip/rk3399: Set all 4 DVFS voltage rails to 1.1V @300kHzVadim Bendebury
Previous code had several problems: * It was only initting 3 of the 4 voltage rails hooked up to PWM regulators. * It was using a PWM frequency that was out of range. Apparently from testing 300kHz is best. * It was initting all rails to .9V. On my Kevin I needed 1.1V to make booting all 6 cores / rebooting reliable. With this fix both booting all 6 cores in the kernel is reliable (if we tell the kernel not to touch the PWM) and the "reboot" command from Linux userspace is also reliable (previously it crashed in coreboot). NOTES: * Setting all rails to the same voltage doesn't make a lot of sense. We should figure out what these should _actually_ be. Presumably the little CPU rail can be lower, at least. ...and we don't use the GPU in the BIOS so we should set that lower. BRANCH=none BUG=chrome-os-partner:51922 TEST=reboot test Change-Id: I44f6394e43d291cccf3795ad73ee5b21bd949766 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0ac79a7cfb079d23c9d7c4899fdf18c87d05ed0e Original-Change-Id: I80996adefd8542d53ecce59e5233c553700b309f Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/339151 Reviewed-on: https://review.coreboot.org/14727 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: support saradcLin Huang
This patch add functions to configure saradc clk and get saradc's raw value for each channel. Currently add saradc to ramstage. Please refer to TRM V0.3 Part 2 Chapter 18 for this IP. BRANCH=none BUG=chrome-os-partner:51537 TEST=on kevin board, get the raw value 61 for channel 0, measure the ADC_IN0 as 0.109V, 61.0/1024 = 0.05957 0.109V/1.8V = 0.06056 Change-Id: Ic198b2a964ccf8bb687441f0e2702665402fff6e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bc400316de2d75eccad3990a4187bf2dc49a844a Original-Change-Id: I542430ed97bd27f9bfcec89b1d703d9fa390d4e0 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/334177 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14720 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: enable arm trust firmwareLin Huang
BRANCH=none BUG=chrome-os-partner:51537 TEST=kernel is not stuck anymore and can boot into prompt, (testing with others patches) Change-Id: I74bdfa0ce608044a554bb3b06ed17b7157260294 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ca4e7a50c989ae0eff270df4fa160b80a172af31 Original-Change-Id: Id95d5f282ba49981f8e33da029e8710cd4087945 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332561 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14719 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: make sure sdram top does not spill into MMIO spaceLin Huang
The base address of MMIO space is different for different Rockchip SOCs. Define them in the appropriate address map files and use the definition in common code. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I615f3cadd6d5d994b7dd1defbd10d02ad5c994da Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24f941e960e4a2cfb9fc26415f56e240de3d00d9 Original-Change-Id: Ia48d75e7de546b17636cde7829ee09837b9d7ac9 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/337190 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14717 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add sdram driverLin Huang
Add the sdram driver for rk3399. With this patch we can boot into depthcharge. This patch also include a config file for lpddr3-hynix-4GB that generated bases on its datasheet. Please refer to TRM V0.3 Part1 Chapter 9 for DMC. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot to depthcharge on kevin Change-Id: I2afcaa3b68dbad77a5fe677b835289b675ed2bef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5d777e29942057fb7237eefa34051d1f54b19405 Original-Change-Id: Ifa1fe98a7058869518757d50678a64620610d91d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332562 Reviewed-on: https://review.coreboot.org/14716 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: init the secure settingShunqian Zheng
set sdram, sram and all device to non-secure status, so we can free to do mmu operation in coreboot. bl31 will care about secure control. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I11e02246550630c6dfe4e0cbad01e8cd5b83ef1e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ae2df532856110c4d87eb162fd3687f8de27c77f Original-Change-Id: Ia026cf685a9d7bdf7b0c7181b1b325c54bc4554f Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338947 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14715 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: enable pwmLin Huang
Reuse the rockchip common pwm driver. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I1a1ab237f891f06affb74817b5cae1a034a9760e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 37afce0f94435ffef8bdd74b4251430f11ec22f4 Original-Change-Id: Ia94985f56e424d049fdcc5be86c696577d52a07c Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/333255 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add gpio driverVadim Bendebury
Reuse the common gpio driver and implement some stubs in gpio.h. RK3288 has one pmu gpio while RK3399 have two. Please refer to TRM V0.3 Part2 Chapter 11 for GPIO section. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I041865ce269b0ae1f6a07e6c37d53d565a37c5ef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d416ba0ce6a1ff2cf52f6b83ade601d93b40ffeb Original-Change-Id: I1d213a91ea508997b876441250743671204d7c53 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332560 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14713 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add i2c clock driverhuang lin
This patch add i2c clock driver and reuse the common rockchip i2c driver. The i2c0,4,8 src clock from ppll, while i2c1,2,3,5,6,7 from gpll. Please refer to TRM V0.3 Part1 Page 142 for i2c clock setting. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I91822e483244d71798a1c68f14ba0a84f405a665 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 270118e44d159f6a27812fa234b34fe7ac54cbe4 Original-Change-Id: Iea5f4a93cf173e1278166dcb04e19a4ef6c4af04 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/338948 Reviewed-on: https://review.coreboot.org/14711 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add spi clock driverShunqian Zheng
This patch implements spi clock driver and initialize SPI flash rom for the baseboard gru. There are 6 on-chip SPI controllers inside RK3399. For SPI3, it's source clk from ppll, while the others from gpll. Please refer to CRU session of TRM for detail. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I597ae2cc8ba1bfaefdfbf6116027d009daa8e049 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4c6a9b0aedd427727ed4f4a821c5c54fb3a174b9 Original-Change-Id: I68ad859bf4fc5dacaaee5a2cd33418c729cf39b8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338946 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: enable mmuLin Huang
This patch initialize MMU and config mmu ranges for rk3399. During the bootblock phase, mark the max dram size supported(4GiB) as device memory because the mmio space start at 0xF8000000, and _sram as secure memory. After ddr setup in romstage, remark whole dram as cached memory except the _dma_coherent range. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I0cd4abb8c30b73d87d8ba6f964edd42bdf4813fb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fc22ab0c16d8107c217db1629286d5ff1c4bc5b3 Original-Change-Id: I66bfde396036d7a66b29517937a28f0767635066 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332387 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14708 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add functions to configure ddrc freqShunqian Zheng
This patch list four frequencies for ddr controller, 200MHz, 300MHz, 666MHz and 800MHz and configure each freq by setting the DPLL dividers. By default, the clk_ddrc is from DPLL and equals to DPLL, so here we only need to set the DPLL clock. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: Ifabe85b5dc95e3c8e3e9cbf946e12e8b06b881cf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 18ec4f7d8738472fbadd60fa3c8f810f5347ffa2 Original-Change-Id: I448057542c3885068ddffa5b37d0341ee3ec04b1 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/340184 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14707 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: support basic clock driverLin Huang
This patch initialize the PLL clocks and add function to configure cpu freq. Right now, we set the little cpu freq to 600MHz. In coreboot, we currently care about these four PLLs, o. APLL for cpu clk, where A stands for AXI, o. CPLL and GPLL are the generic PLL mainly for peripheral clk, o. PPLL is only PMU clk. For the peripheral clocks, there are thress clocks named as, aclk_perihp, aclk_perilp0, hclk_perilp1, where the 'h' and 'l' letters refer to High and Low speed. As the diagram below, the aclk_perihp always be the parent of more higher speed peripheral devices like pcie, and hclk_perilp1 for spi, i2c, aclk_perilp0 for crypto. These three clocks can choose parent from GPLL or CPLL freely, in this patch, they are all sourced from GPLL. GPLL(594M)/CPLL(384M) APLL(600M for little core) | | `-- aclk_perihp `-- clk_core(600M == APLL) | | | | `-- periph_aclk(148.5M) `-- atclk_core(300M) | `-- periph_hclk(148.5M) `-- aclkm_core(300M) | `-- periph_pclk(37.125M) `-- pclk_dbg_core(100M) | `-- hclk_perilp1 | | | `-- periph_hclk(99M) PPLL(594M) | `-- periph_pclk(49.5M) | | `-- pmu_pclk(99M) `-- aclk_perilp0 | `-- periph_aclk(99M) `-- periph_hclk(99M) `-- periph_pclk(49.5M) BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I1c46ff17e6b466529244afb41d7fd4abbcfd3da4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9f0d31177336a3450577950426f9cc9d56e2254c Original-Change-Id: I4ad00df3e406bd0a7576287d6e62b8993a8c2d02 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332386 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14706 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: use static pointers to regs as they compile to faster codeVadim Bendebury
Quoting an earlier review comment, using static structures pointers in the include file "should allow the compiler to optimize accesses better than defining it in a separate compilation unit (by being able to constant fold stuff like &rk3399_pmusgrf->field into a single address, rather than loading the symbol, loading an offset constant and adding)". Any decent compiler linker system nowadays would consolidate this definition in any case. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied Kevin successfully boots Linux kernel. Change-Id: Ibb576c7691a30f2f429651fcca133bd72710c13b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89b6f22e37f733667156f15afb8c27d8a9f07512 Original-Change-Id: Ice8d6d766a91e7f4fce553378a23b9ca593d12dd Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/339869 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14705 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add the GRF header fileLin Huang
The GRF(general register file) of rk3399 is divided into two sections, o. GRF, used for general non-secure system o. PMUGRF, used for always-on syosyem This patch defines the registers used for iomux/gpio/system control. BRANCH=none BUG=none TEST=emerge-kevin coreboot Change-Id: I3239793523e0f55f6661ef029c3dac9970990fb8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 897d01573ea2bbe2b3091358ec3c9728ee82f8ec Original-Change-Id: I4c228ddb60c9c4056de50312dc269227fac9a7fa Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332388 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14704 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add simplest sdram to fix compiling errorShunqian Zheng
This patch is only to make building happy, the real sdram driver comes later. BRANCH=none BUG=none TEST=emerge-kevin coreboot Change-Id: I4123c3a6627d7264c615fefbb89e16c4dfb9a423 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5b992a7895a72c83f57228d3abd1ae37d55e7e7b Original-Change-Id: Ie340877e828ae760169ccfa9a7099e7472d2fc26 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338944 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14703 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip/rk*: replace UART special snowflake with standard driverPatrick Georgi
The standard uart8250mem_32 driver is now usable on ARM, so use it. BUG=none BRANCH=none TEST=see that serial firmware builds still log on serial in all stages on veyron_minnie. Also verified that a 9600 baud console is functional. Change-Id: I653b70a0d51a8d136e1da17537988f5b33c7a160 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fa27c60fd38002775072d11fca431d4788b4d1d7 Original-Change-Id: I047d74ac2d5c311f303955e62391114e16ec087a Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/337551 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14319 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-16google/gru: Incorporate feedback to #14279Patrick Georgi
To avoid diverging too much on an actively developed code base, keep the changes to a separate commit that can be downstreamed more easily: - removed unused includes - gave kevin board a "Kevin" part number - marked RW_LEGACY as CBFS region (to follow up upstream changes) - moved romstage entry point to SoC code (instead of encouraging per-board copy pasta) Change-Id: Ief0c8db3c4af96fe2be2e2397d8874ad06fb6f1f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14362 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-13rockchip/rk3399: Add a stub implementation of the rk3399 SOChuang lin
Most things still need to be filled in, but this will allow us to build boards which use this SOC. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied Kevin board can be booted to Linux login propmt. Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840 Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332385 Reviewed-on: https://review.coreboot.org/13915 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 17:16:52 +0000