aboutsummaryrefslogtreecommitdiff
path: root/src/soc/qualcomm
AgeCommit message (Collapse)Author
2015-03-23ipq806x: implement GPIO APIVadim Bendebury
Add implementation of the GPIO API defined in src/include/gpiolib.h. Also, clean up the GPIO driver, make it use pointers instead of integers for register address. This requires a touch in the SPI driver, where the CS GPIO is toggled and in the board function where it enables USB interface. BUG=chrome-os-partner:30489 TEST=tested with the following patches, observed proto0 properly read the board ID. Original-Change-Id: I0962947c6bb32a854ca300752d259a48e9e7b4eb Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/210115 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit e951f735001509d135cc61530ed0eecb5fc31a85) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8a612dce000931835054086c1b02ebfc43dc57d2 Reviewed-on: http://review.coreboot.org/8718 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-03-23Generalize revision number calculation functionVadim Bendebury
Some platforms use tertiary interpretation of GPIO input state to increase number of distinct values represented by a limited number of GPIOs. The three states are - external pull down (interpreted as 0) - external pull up (1) - not connected (2) This has been required by Nvidia devices so far, but Exynos and Ipq8086 platforms need this too. This patch moves the function reading the tertiary state into the library and exposes the necessary GPIO API functions in a new include file. The functions are still supposed to be provided by platform specific modules. The function interpreting the GPIO states has been modified to allow to interpret the state either as a true tertiary number or as a set two bit fields. Since linker garbage collection is not happening when building x86 targets, a new configuration option is being added to include the new module only when needed. BUG=chrome-os-partner:30489 TEST=verified that nyan_big still reports proper revision ID. Change-Id: Ib55122c359629b58288c1022da83e6c63dc2264d Original-Change-Id: I243c9f43c82bd4a41de2154bbdbd07df0a241046 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/209673 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit c79ef1c545d073eaad69e6c8c629f9656b8c2f3e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/8717 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-17ipq806x: Break apart large transfers in spi_xfer()David Hendricks
The current spi_xfer() function sets the count in hardware and then loops while waiting for the requested number of bytes to be sent or received. However, the number of bytes to be transferred may exceed the maximum count that can be programmed into the controller. This patch re-factors spi_xfer() to split the low-level FIFO handling portions for transmit/receive into their own functions to be called by loops in spi_xfer() which will break large transfers into smaller ones. BUG=chrome-os-partner:30904 BRANCH=storm TEST=built and booted with a >64KB payload on Storm Original-Change-Id: I70743487996cf08cfc602449f2181a7fcd99bfa4 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/209838 Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> Original-Tested-by: Trevor Bourget <tbourget@codeaurora.org> (cherry picked from commit 5ec28de11f12c2438356f45ce978a17fbb603bf7) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0033e0dd96006cfd30a7a4f5e5a052f677e05108 Reviewed-on: http://review.coreboot.org/8676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-17soc/ipq806x: Replace GPT with fine grained DGT timer.Deepa Dinamani
Support 1MHz libpayload restriction on timer implementation by using DGT (debug) timer instead of GPT (general purpose) timer. BUG=chrome-os-partner:28880 TEST=manual verified DGT timer functions in coreboot and depthcharge. Original-Change-Id: Iab322d7e863e3959c027e9ce876223a64eb7e257 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201574 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit ddf11eee5ec2d86a62095e932dbec9313b8fb9e1) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id73e805801fd8d135b607df9f4f8caf567ec5b83 Reviewed-on: http://review.coreboot.org/8596 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-12storm: allow to override CBFS_SIZE configuration settingVadim Bendebury
The default CBFS size configuration setting is incorrect in case of Qualcomm SOC targets, as the coreboot blob is much smaller than the actual bootprom. Note that this size also must match the board fmap defined in the appropriate depthcharge board directory. BUG=chromium:394068 TEST=manual . previously failing to boot coreboot image does not fail to load depthcharge anymore. Original-Change-Id: I1b178970b1deee05705490542e4a0c57500379dd Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208146 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 01f3561fdee7b5547534e20d423fbbb1b490532c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: If573bbc6254cf6786e75970eae3ad2b327a7ecfe Reviewed-on: http://review.coreboot.org/8640 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-06include/types.h: Provide BIT() macroAlexandru Gagniuc
This macro is controversial for arches where the bits are numbered MSb first, though we don't support such an arch. We've seen this macro creep into our tree in different places, so provide it in one place. Change-Id: I86cd8a16420f34ef31b615aec4e0f7bd3191ca35 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8280 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-01-27vboot2: add verstageStefan Reinauer
This reverts the revert commit 5780d6f3876723b94fbe3653c9d87dad6330862e and fixes the build issue that cuased it to be reverted. Verstage will host vboot2 for firmware verification. It's a stage in the sense that it has its own set of toolchains, compiler flags, and includes. This allows us to easily add object files as needed. But it's directly linked to bootblock. This allows us to avoid code duplication for stage loading and jumping (e.g. cbfs driver) for the boards where bootblock has to run in a different architecture (e.g. Tegra124). To avoid name space conflict, verstage symbols are prefixed with verstage_. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac Original-Reviewed-on: https://chromium-review.googlesource.com/204376 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> (cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a83b87c29d98d97ae316091cf3ed7b024e21daf Reviewed-on: http://review.coreboot.org/8224 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-09storm: Reserve memory from 0x4000_0000-0x414f_ffffDavid Hendricks
This marks the bottom chunk of memory, which is used by various IP blocks, as reserved so that Depthcharge does not attempt to wipe it. BUG=chrome-os-partner:30067 BRANCH=storm TEST=Built and booted for storm, depthcharge shows: Wipe memory regions: [0x00000041500000, 0x00000051000000) [0x000000510006a0, 0x00000053000000) [0x00000054141260, 0x0000007fffd000) Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I8f782f16d13620b705e1b3fbeca21dc8705b7e77 Original-Reviewed-on: https://chromium-review.googlesource.com/206516 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit f66f553f1594c481a74b7f40b4b1088600b1a70a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I82d118abc86052f5e32f6195a4efd04fe315be5a Reviewed-on: http://review.coreboot.org/8149 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-06doxygen fixes: change @var to @param varMartin Roth
These files were trying to document the parameters, but didn't have the syntax quite right. Change the comments from @varname to @param varname as required by doxygen. Change-Id: I63662094d3f1686e3e35b61925b580eb06e72e28 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8100 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-04ipq806x: Fix casting in cbmem_top() so >=2GB can be usedDavid Hendricks
This explicitly casts CONFIG_SYS_SDRAM_BASE to an unsigned type so we don't get compilation errors when increasing CONFIG_DRAM_SIZE_MB. BUG=chrome-os-partner:29871 BRANCH=storm TEST=compilation no longer fails with DRAM_SIZE set to 1024 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I9717c39d87682d43ec4e7a4042d9b559a1d7eedb Original-Reviewed-on: https://chromium-review.googlesource.com/206010 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 178db896346ae8cbc5ddec5373a83688f32c62ba) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I68c11d398820684ad928bdfdd74f7a6885247333 Reviewed-on: http://review.coreboot.org/8059 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-01-04ipq806x: move GPIO definitions to the proper include fileVadim Bendebury
When the IPQ SPI driver was ported to coreboot, a few GPIO related definitions ended up in a wrong include file. Move them to the proper place and get rid of duplicated definition of GPIO_OUT. BUG=chrome-os-partner:27784, chrome-os-partner:29871 TEST=proto0 still boots with the new firmware Original-Change-Id: I4b06067a71c85efaf0e48f29e232f83fd1f725a8 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/205328 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> (cherry picked from commit df73bb0023f5eaf5594ef41b3632c4402ebf126c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I109e62e3bfc9bd15640ff697be7634f42435a3e4 Reviewed-on: http://review.coreboot.org/8058 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-04ipq806x: move translation table out of the wayVadim Bendebury
Depthcharge clears up all unused DRAM before starting Linux, and does not know the translation table location. Instead of adding an exclusion term to the memory wipe descriptor let's move the table to the top of IMEM, it is also likely to be a good location in the future, when EFS is introduced. BUG=chrome-os-partner:27782 TEST=manual . built and ran firmware on ap148 Original-Change-Id: I76546438d243076dda4d0eb3f784e0b5a8a1fa22 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/203624 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 4250f8574d6cc0bbec5ba0411f22d801f034afb8) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I12cd74e3d318b878e7703414a7ddaaed0812cb7a Reviewed-on: http://review.coreboot.org/8057 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-04ipq806x: Add USB supportJulius Werner
This patch adds code to initialize the two DWC3 USB host controllers and their associated PHYs to the IPQ806x SoC (closely imitating the existing DWC3 implementation for Exynos5), and uses them to initialize USB on the Storm mainboard. BUG=chrome-os-partner:29375 TEST=Hack up netboot to get around missing SPI flash, load a file over TFTP. Hack a storage read into the storage attach function, dump the data and confirm that it looks right. Enable USB debugging and confirm 3.0 devices get enumerated at SuperSpeed (mostly). Original-Change-Id: Iaf7b96bef994081ca222b7de9d8e8c49751d3f1d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202157 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit 6349e7281d5accb1247acb0537a48fa3a5e1bf97) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I749d265d45c6a807a7559bd4df2490a6eb8067af Reviewed-on: http://review.coreboot.org/8056 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-03ipq806x: clean up UART driver tx_byte functionVadim Bendebury
The driver as it was copied from u-boot provided a function to transmit multiple characters in one invocation. This feature was not ported to coreboot, there is no need to maintain the complexity when only one character at a time is transmitted. It is also very desirable to get rid of a 1024 byte array allocated on the stack. The array was necessary to allow to convert multiple newline characters in the transmit data flow into two character sequences CRLF. Now just a single word is enough to keep one or two characters to transmit. [EDIT km: newline translation is now part of printk] BUG=chrome-os-partner:27784 TEST=verified that coreboot with the new code prints generates console output. Original-Change-Id: I73869c5f4ca87210b34811b583386554bafff1e7 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201782 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> (cherry picked from commit eab3dc9d30c7e8355a2563e18ada78e4070e6151) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I4274b8f7188bf9636906b39bcd9ec7adf0e1222e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8011 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-03storm: Put the page table at a correct addressVadim Bendebury
The recently introduced page table location value is wrong, it overlaps with other areas of the code. This patch fixes the location, a more robust scheme is needed for memory layout management. BUG=none TEST=manual . occasional random failures disappear after this patch is applied Original-Change-Id: Idc9047d38712736c5e8197e933c373488b333649 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202641 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit d26bb18e506680a1f481c3950007b2ea6a48e54d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I7afcab42db259e53541fb991b36d680fc2186304 Reviewed-on: http://review.coreboot.org/8019 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-03storm: modify memory layoutVadim Bendebury
This is an interim change (before EFS is enabled), align ROM and RAM stages so that they have enough room and do not step over each other. BUG=chrome-os-partner:27784 TEST=manual . booted coreboot successfully on ap148 Original-Change-Id: I6e1710ac7ca494a69aea5ba3b117bfd882aded26 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202046 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> (cherry picked from commit f1fd4e3f9d699cc694cf7840c169db9bbe9193b6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9861d34a8bdd6963afbeed7fca7fda8a891ec481 Reviewed-on: http://review.coreboot.org/8012 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-03soc/ipq806x : Add CONFIG_TTB_BUFFER for the soc.Deepa Dinamani
Define a base address for page table entries. Place it 64KB below the bootblock loading address. BUG=chrome-os-partner:28467 TEST=verified that the page tables are being populated at this address. Also observed that the SPI driver takes 900 ns to process a byte as opposed to 1.5 us in case caching is not enabled. Original-Change-Id: I3d8bd3104c55389aa5768033642ebbf1fda0fec7 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200332 (cherry picked from commit 483dbea46c7d4c8ea8dbaf11bc82990f4cffff8c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ifef78b9bd6938533bed415ec99fd75a8031a7068 Reviewed-on: http://review.coreboot.org/8009 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-03ipq8064: add SOC initialization skeletonVadim Bendebury
The main benefit of adding this skeleton is the addition of the correct memory map to CBMEM. Attempts to load depthcharge do not fail because of unavailability of the bounce buffer. BUG=chrome-os-partner:27784 TEST=boot updated firmware on AP148, observe CPU: Qualcomm 8064 in the ramstage console output as well as not failing to load depthcharge any more. Original-Change-Id: I56c1fa34ce3967852be6eaa0de6e823e64c3ede8 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199675 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit a8fdbdd268a2bba1405d585881eb95510ad17a2a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I7b982f222ac3b93371fe77961f18719c5d269013 Reviewed-on: http://review.coreboot.org/8000 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-03storm/ipq8064: add dynamic CBMEM supportVadim Bendebury
Squashed the correction patch with the original to avoid confusion in coreboot.org review. All what's needed apart from configuring the feature is to provide a function which would report the top of DRAM address. BUG=chrome-os-partner:27784 TEST=manual . with all other patches applied, the image proceeds all the way to trying to download 'fallback/payload'. Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Change-Id: Ifa586964c931976df1dff354066670463f8e9ee3 Original-Reviewed-on: https://chromium-review.googlesource.com/197897 (cherry picked from commit 54fed275fe80dee66d423ddd78a071d3f063464a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> storm: initialize dynamic cbmem properly Dynamic cbmem support has been enabled on storm, but the proper initialization at romstage is missing. Proper DRAM base address definition is also necessary so that CBMEM is placed in the correct address range (presently at the top of DRAM). BUG=chrome-os-partner:27784 TEST=build boot coreboot on ap148, observe the following in the console output: Wrote coreboot table at: 5fffd000, 0xe8 bytes, checksum 44a5 coreboot table: 256 bytes. CBMEM ROOT 0. 5ffff000 00001000 COREBOOT 1. 5fffd000 00002000 Original-Change-Id: I74ccd252ddfdeaa0a5bcc929be72be174f310730 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199674 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit e2aeb2f4e7f3959d5f5336f42a29909134a7ddb7) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I45f7016dd510fe0e924b63eb85da607c1652af74 Reviewed-on: http://review.coreboot.org/7996 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03ipq8064: Configure storm bootblock to runVadim Bendebury
This adds necessary configuration options to enable bootblock on Storm to read the rombase image from the SPI flash. BUG=chrome-os-partner:27784 TEST=manual . after this change is applied, the AP148 boots coreboot from the Spansion SPI flash device: coreboot-4.0 Thu May 1 14:25:34 PDT 2014 starting... Exception handlers installed. SF: Detected S25FL128S_256K with page size 10000, total 2000000 CBFS: loading stage fallback/romstage @ 0x40608000 (7788 bytes), entry @ 0x40608001 coreboot-4.0 Thu May 1 14:25:34 PDT 2014 booting... Exception handlers installed. ... Original-Change-Id: I9d5e10d6e9f5b60bad5ea71003ea53d8c84ae188 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197801 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 73d72df228e3c6154d8836b0af6d94df91c88bf4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I509e6da15559c790f129d457d6e463ef90a5dc67 Reviewed-on: http://review.coreboot.org/7995 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03storm: ipq8064: enable CBFS SPI wrapperVadim Bendebury
This change forces storm platform to use the common CBFS SPI wrapper, which makes the SOC specific CBFS code unnecessary and requires including SPI controller support in all coreboot stages. BUG=chrome-os-partner:27784 TEST=manual . with this change and the rest of the patches coreboot on AP148 comes up all the way to attempting to boot the payload (reading earlier stages from the SPI flash along the way). Original-Change-Id: Ib468096f8e844deca11909293d90fc327aa99787 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197932 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 794418a132b5be5a2c049f28202da3cec7ce478d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I751c51c91f29da4f54fcfe05e7b9a2e8f956c4f2 Reviewed-on: http://review.coreboot.org/7994 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03ipq8084: provide monotonic us timerVadim Bendebury
This service is required by various coreboot code modules. It looks like the 8064 SOC does not provide anything better than a 32 KHz free running counter (it is used in u-boot for us timer as well). Let's use this for now. BUG=chrome-os-partner:27784 TEST=manual . with the rest of the patches applied AP148 boots all the way to trying to start the payload. Original-Change-Id: I98b91ce179f7388d59c769a59caf49ca7640e047 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197896 (cherry picked from commit d526830f9d9618e4ca3460165d7b9ecc8ab268cf) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id37ed21193db67ceee11a795713c34ef26383380 Reviewed-on: http://review.coreboot.org/7993 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-31ipq8064: modify SPI controller driver to work in corebootVadim Bendebury
A typical SPI operation consists of two phases - command and data transfers. Command transfer is always from the host to the chip (i.e. is going in the 'write' direction), data transfer could be either read or write. We don't want the receive FIFO to be operating while the command phase is in progress. A simple way to keep the receive FIFO shut down is to not to enable it until the command phase is completed. Selective control of the receive FIFO allows to consolidate the receive and transmit functions in a single spi_xfer() function, as it happens in other SPI controller drivers. The FIFO FULL and FIFO NOT EMPTY conditions are used to decide if the next byte can be written or received, respectively. While data is being received the 0xFF bytes are transmitted per each received byte, to keep the SPI bus clocking. The data structure describing the three GSBI ports is moved from the .h file into .c file. A version of the clrsetbits macro is added to work with integer addresses instead of pointers. BUG=chrome-os-partner:27784 TEST=not yet, but with the res of the changes the bootblock loads and starts the rombase section successfully. Original-Change-Id: I78cd0054f1a8f5e1d7213f38ef8de31486238aba Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197779 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit c101ae306d182bbe14935ee139a25968388d745a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I7f3fd0524ec6c10008ff514e8a8f1d14a700732f Reviewed-on: http://review.coreboot.org/7983 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2014-12-31ipq8064/storm: UART enable and various fixesVadim Bendebury
The original patch from chromium was a bit of a mishmash. Between that, rebasing and using the coreboot.org UART infrastructure, the patch has changed a bit from the original. It seems reasonable to keep these changes together. - build in the ipq UART and turn on bootblock console - sets LPAE and ROM header address - adds cpd.c to storm The original commit: ipq8064: make UART driver work in bootblock This patch it the last one in the chain adapting the ipq9064 UART driver for use in coreboot. A new config option (CONSOLE_SERIAL_IPQ806X) is being introduced to control inclusion of the driver. The previously introduced uart_wrapper.c is now included in the build to provide the console driver structure used by ramstage. Necessary configuration options are added to allow use of UART in the bootblock. BUG=chrome-os-partner:27784 TEST=with this change the coreboot image on AP148 prints a banner on start up: coreboot-4.0 Wed Apr 23 16:24:51 PDT 2014 starting... Original-Change-Id: I129ee30ba17a5061b30cfee56c135df31eba98b5 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196663 (cherry picked from commit 42ca8994361327c24e7a611505b21534dd231f30) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1175e74ed639cdc27a1a677fba65de2dd2b13a91 Reviewed-on: http://review.coreboot.org/7875 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-30ipq8064: copy u-boot spi driver as isVadim Bendebury
This brings in the banana_cs version of the SPI driver. BUG=chrome-os-partner:27784 TEST=none Original-Change-Id: Ie93ec8c962c26fff1f0a235516cd8a4062cab40b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/194225 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 3cada6e4ed51a6d4f637aa31a1a836352a99d13d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0a58a4ddaf9375c22c9b2b249a2baa2c5538ba6c Reviewed-on: http://review.coreboot.org/7982 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-30ipq8064: prepare uart driver for use in corebootVadim Bendebury
The IO accessor wrappers are used to allow integer register addresses. A structure defining UART interface configuration is declared and defined. A few long lines are wrapped. Interface functions are renamed to match the wrapper API. cdp.c is edited to fit into coreboot compilation environment, and the only function required by the UART driver if exposed, the rest are compiled out for now. BUG=chrome-os-partner:27784 TEST=after all patches are applied the serial console on AP148 becomes operational. Original-Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196662 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5e9af53a069cd048334a3a28f0a4ce9df7c96992) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49 Reviewed-on: http://review.coreboot.org/7874 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30ipq8064: prepare include files before adding UART driverVadim Bendebury
These patch modifies .h files to match the coreboot API. A few more significant changes are: - UART specific fields removed from common board structure in cdp.h. These fields are set at compile time in u-boot (where this structure comes from), they will be set in a different structure in the UART driver in an upcoming patch. - an inline wrapper is added in gpio.h to provide GPIO API the UART driver expects. - the ipq_configure_gpio() is passed the descriptor placed in ro data. BUG=chrome-os-partner:27784 TEST=none Original-Change-Id: Id49507fb0c72ef993a89b538cd417b6c86ae3786 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196661 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit ea400f1b720eb671fa411c5fd1df7efd14fdacd6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2c7be09675b225de99be3c94b22e9ee2ebb2cb9a Reviewed-on: http://review.coreboot.org/7873 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30ipq8064: SOC UART driver belongs in the SOC directoryVadim Bendebury
Move the driver to where it belongs. BUG=chrome-os-partner:27784 TEST=none Original-Change-Id: Iee33de0b29a6bb86ba7c37e7e89aabc0fee42e80 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196658 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 64afb0a2ac9b6cd4c202b879a484220e70ff5bbe) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iee33de0b29a6bb86ba7c37e7e89aabc0fee42e80 Reviewed-on: http://review.coreboot.org/7871 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-30ipq8064: make timer services availableMarc Jones
Make sure it is initialized at different stages. BUG=chrome-os-partner:27784 TEST=manual . not much at this point, just verified that it compiles Original-Change-Id: I343e7a6648e2ca935606cd76befd204aabd93726 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196592 (cherry picked from commit aedc41924313e5c21aef97b036f5a0643d59082d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I4a90ae5ba6c9a561b7d5c938d18b6ea2b855855f Reviewed-on: http://review.coreboot.org/7981 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30ipq/arm: Redesign hooks for bootblockVadim Bendebury
The following patches had to be squashed to properly build all the different ARM boards. ipq8064: storm: re-arrange bootblock initialization The recent addition of the storm bootblock initialization broke compilation of Exynos platforms. The SOC specific code needs to be kept in the respective source files, not in the common CPU code. As of now coreboot does not provide a separate SOC initialization API. In general it makes sense to invoke SOC initialization from the board initialization code, as the board knows what SOC it is running on. Presently all what's need initialization on 8064 is the timer. This patch adds the SOC initialization framework for 8064 and moves there the related code. BUG=chrome-os-partner:27784 TEST=manual . nyan_big, peach_pit, and storm targets build fine now. Original-Change-Id: Iae9a021f8cbf7d009770b02d798147a3e08420e8 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197835 (cherry picked from commit 3ea7307b531b1a78c692e4f71a0d81b32108ebf0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> arm: Redesign mainboard and SoC hooks for bootblock This patch makes some slight changes to the way bootblock_cpu_init() and bootblock_mainboard_init() are used on ARM. Experience has shown that nearly every board needs either one or both of these hooks, so having explicit Kconfigs for them has become unwieldy. Instead, this patch implements them as a weak symbol that can be overridden by mainboard/SoC code, as the more recent arm64_soc_init() is also doing. Since the whole concept of a single "CPU" on ARM systems has kinda died out, rename bootblock_cpu_init() to bootblock_soc_init(). (This had already been done on Storm/ipq806x, which is now adjusted to directly use the generic hook.) Also add a proper license header to bootblock_common.h that was somehow missing. Leaving non-ARM32 architectures out for now, since they are still using the really old and weird x86 model of directly including a file. These architectures should also eventually be aligned with the cleaner ARM32 model as they mature. BRANCH=None BUG=chrome-os-partner:32123 TEST=Booted on Pinky. Compiled for Storm and confirmed in the disassembly that bootblock_soc_init() is still compiled in and called right before the (now no-op) bootblock_mainboard_init(). Original-Change-Id: I57013b99c3af455cc3d7e78f344888d27ffb8d79 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231940 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 257aaee9e3aeeffe50ed54de7342dd2bc9baae76) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id055fe60a8caf63a9787138811dc69ac04dfba57 Reviewed-on: http://review.coreboot.org/7879 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-06soc/qualcomm/ipq806x/Kconfig: Fix indent styleEdward O'Callaghan
Change-Id: I72c9c1f5811fafaeec9572b05726d5677e2c28b1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7669 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-05ipq8064: Make clock code build in corebootVadim Bendebury
Include clock.c in the appropriate coreboot stages, modify the code to build cleanly. Use proper pointer cast in .h files. BUG=chrome-os-partner:27784 TEST='emerge-storm coreboot' still succeeds Original-Change-Id: I227c871b17e571f6a1db3ada3821dbb1ee884e59 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196407 (cherry picked from commit 75decceccd97298974891bb98b796eccfe11f46c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I7d44464d4ca8153e84407fc05a25e2e79e74901e Reviewed-on: http://review.coreboot.org/7271 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-05ipq8064: prepare UART driver for use in corebootVadim Bendebury
These driver needs to be in src/lib, and the include file needs to be renamed to avoid collision with the top level uart.h. BUG=chrome-os-partner:27784 TEST=emerge-storm coreboot still works Original-Change-Id: Ie12f44e055bbef0eb8b1a3ffc8d6742e7a446942 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196393 (cherry picked from commit c5618fd418642f5b009582f5f6bc51f7c9d54bec) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5e25ae350ac5e71b47a0daef078b03cc5ac35401 Reviewed-on: http://review.coreboot.org/7270 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-13ipq8064: Make timer code compileVadim Bendebury
Commment out nonessential timer services and modify the source code to cleanly build in coeboot environment. Do not remove dead code just yet, these functions might be necessary later. Need to rename the soc timer.h to prevent collisions with timer.h in the top level include directory. Currently build timer code for ramstage only. BUG=chrome-os-partner:27784 TEST='emerge-storm coreboot' still succeeds Original-Change-Id: Ib10133ccb42697840708845a8ea6d75ceeaeb3d5 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/194067 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 987ce95220953c16216d1e1d70d5a941d05fc9bc) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia9cf175da11c70709354def5e51bf79df4fda2fe Reviewed-on: http://review.coreboot.org/7269 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13ipq8064: Configure proper bootblock stack and load addressVadim Bendebury
The SBL3 currently seems to be preventing the bootblock from being loaded into the IMEM. As a temporary measure, map bootblock into DRAM (as it is available after SBL2 finished running) and specify the correct stack space. BUG=chrome-os-partner:27784 TEST=not much testing yet, just verify 'emerge-storm coreboot' still succeeds. Original-Change-Id: Ibe9d4911ad22ada1bbd01af54a2ef80009df3a28 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196168 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 950323d6091c3b795034c24a08b6c176f56f0e0f) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib3ec21f2cb4058b3e3cc82864de89dadf3b6aa84 Reviewed-on: http://review.coreboot.org/7268 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13Use sbl blobs from a private locationVadim Bendebury
The sbl blobs could not yet be published, they have been moved to a private location. Update coreboot to pick up the blobs at the correct place. BRANCH=None CQ-DEPEND=CL:195003 BUG=chrome-os-partner:28059 TEST=manual $ emerge-storm coreboot succeeds Original-Change-Id: I8c4163bc978307e41c156ef9f7f2a211d57db7a8 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/194997 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 1a1848b00acfc2f58990559e824ea9c13c3c239c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: If597ebbfd348039d578c99cd7a8e3c4bcbf60c10 Reviewed-on: http://review.coreboot.org/7267 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13ipq806x: Add support for GPIO operationsFurquan Shaikh
Basic support for ipq806x GPIO CFG and IO reg operations Reference: IPQ806x PRM, u-boot arch-ipq806x/gpio.* BUG=None BRANCH=None TEST=Compiled successfully Original-Change-Id: Ia0a9f288de3ac7bdb1cd4acbf44ba46af4dcc4e2 Original-Reviewed-on: https://chromium-review.googlesource.com/194217 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 0b48e6655e63b467fe79d52149be01d23a2a3712) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I09e222f35b4b20c8eb901f33cf4451085c4c99cc Reviewed-on: http://review.coreboot.org/7266 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-12ipq806x: Typecast address to void * in read/write operationsFurquan Shaikh
Typecast address to void* to accomodate address being passed as integers BUG=None BRANCH=None TEST=Compiled successfully Original-Change-Id: Iceb51056c8a30a9a9dbd0594f75c23000faa6120 Original-Reviewed-on: https://chromium-review.googlesource.com/194365 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit abf9b1e77b8a078e6ed873cbf34246bd97c81e98) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1806e96e194e936975a43e95b9fd7d7458ef1653 Reviewed-on: http://review.coreboot.org/7265 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-12ipq806x: Add an include/ folder to ipq806xFurquan Shaikh
Add an include/ folder to hold all the *.h files for ipq806x soc BUG=None BRANCH=None TEST=Compiled successfully Original-Change-Id: If07624f126c8d92e479b8f0d9fbc20ab3358a5e3 Original-Reviewed-on: https://chromium-review.googlesource.com/194218 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit c3c573b6a2d7af504e82b2a02a9869d1d057ce36) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I42165fca72b48f0d4f15b192d3bfb1574bc73d7c Reviewed-on: http://review.coreboot.org/7264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-12Copy u-boot sources as is and modify the tree to still buildVadim Bendebury
This patch brings in ipq806x source files from the vendor's u-boot tree as it was published in the 'cs_banana' release. The following files are being copied: arch/arm/cpu/armv7/ipq/clock.c => src/soc/qualcomm/ipq806x/clock.c arch/arm/cpu/armv7/ipq/gpio.c => src/soc/qualcomm/ipq806x/gpio.c arch/arm/cpu/armv7/ipq/timer.c => src/soc/qualcomm/ipq806x/timer.c arch/arm/include/asm/arch-ipq806x/clock.h => src/soc/qualcomm/ipq806x/clock.h arch/arm/include/asm/arch-ipq806x/gpio.h => src/soc/qualcomm/ipq806x/gpio.h arch/arm/include/asm/arch-ipq806x/gsbi.h => src/soc/qualcomm/ipq806x/gsbi.h arch/arm/include/asm/arch-ipq806x/iomap.h => src/soc/qualcomm/ipq806x/iomap.h arch/arm/include/asm/arch-ipq806x/timer.h src/soc/qualcomm/ipq806x/timer.h arch/arm/include/asm/arch-ipq806x/uart.h => src/soc/qualcomm/ipq806x/uart.h board/qcom/ipq806x_cdp/ipq806x_cdp.c => src/mainboard/google/storm/cdp.c board/qcom/ipq806x_cdp/ipq806x_cdp.h => src/soc/qualcomm/ipq8064/cdp.h drivers/serial/ipq806x_uart.c => src/console/ipq806x_console.c Note that local timer.c gets overwritten with the original version. To prevent a build breakage some shortly to be reverted modifications had to be made to src/soc/qualcomm/ipq806x/Makefile.inc and src/soc/qualcomm/ipq806x/cbfs.c. BRANCH=none BUG=chrome-os-partner:27784 TEST='emerge-storm coreboot' still succeeds Original-Change-Id: I3f50bfbec2e18a3b5d2c640cff353a26f88c98c1 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193722 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 3c9c2ede7e97e330cad2c2f3e557cc9bcdaecdcc) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia7bc66cecfc16f1dd4a9f3cb9840cbe91878adf4 Reviewed-on: http://review.coreboot.org/7263 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-12Include IPQ8064 SBLs code in the coreboot bootblockVadim Bendebury
We want the coreboot build produce an image which can be run on the target, even if the remaining parts of the bootprom (recovery path, read-write stages, gbb, etc.) are not available yet. This is achieved by including the Qualcomm SBLs blob in the bootblock. CQ-DEPEND=CL:193518 BRANCH=None BUG=chrome-os-partner:27784 TEST=manual . run the following commands inside chroot to confirm expected image layout (no actual code is executed on the target yet): $ emerge-storm coreboot $ \od -Ax -t x1 -v /build/storm/firmware/coreboot.rom 2>/dev/null | head -1 000000 d1 dc 4b 84 34 10 d7 73 15 00 00 00 ff ff ff ff $ \od -Ax -t x1 -v /build/storm/firmware/coreboot.rom | grep 220000 220000 05 00 00 00 03 00 00 00 00 00 00 00 00 00 01 2a Original-Change-Id: I10e8b81c7bd90e4550a027573ad3a26c38c3808a Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193540 (cherry picked from commit 64e193974ee448f78e0a5775a440094901590afb) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Idbdbeb9d229eff94a7a94af5dc4844a295458200 Reviewed-on: http://review.coreboot.org/7262 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-09Provide ability to integrate with QComm SBLsVadim Bendebury
Ipq8064 SBLs initialize the hardware to prepare it to run an arbitrary user provided bootloader. The only bootloader requirements imposed by the SBLs are that it is concatenated with the SBL chunks in the bootprm AND it uses MBN encapsulation (mostly to specify the size and load address). This patch adds configuration options to specify the location of the SBL blobs and to require MBN encapsulation of the bootblock. BRANCH=none BUG=chrome-os-partner:27784 TEST=manual - the below demonstrates added encapsulation, no code run attempts have been made yet: $ FEATURES=noclean emerge-storm coreboot $ cd /build/storm/tmp/portage/sys-boot/coreboot-9999/work/coreboot-9999 $ \od -t x4 build/cbfs/fallback/bootblock.bin | head -3 0000000 00000005 00000003 00000000 2a010000 0000020 00000be0 00000be0 2a010be0 00000000 0000040 2a010be0 00000000 e32bf0df e59f0030 Original-Change-Id: Iae30ad08059e2b35c434ac25a410ac2017752957 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193511 (cherry picked from commit bf16ea915c723ab124d817e3b0d950282e3cf1c1) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I53c71d382ec1d826f530d7afb545f64ec4eaf96b Reviewed-on: http://review.coreboot.org/7261 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-09-25soc/qualcomm: Add generic support skeleton for ipq806xFurquan Shaikh
Skeleton for soc ipq806x Old-Change-Id: I92a8d592d762f59665e15d1a7fc6cc73dc74c296 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://chromium-review.googlesource.com/190723 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit e71d45733d86e77717fd2f592ef06113246db911) soc/ipq806x: Disable LPAE mode. LPAE (large physical address extension) is not available on this SOC core, do not enable it. Old-Change-Id: I9e9ad1aeaf613f04987c0c306a574085042d0e7b Signed-off-by: Deepa Dinamani <deepad@codeaurora.com> Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/198023 Reviewed-by: deepa dinamani <deepad@quicinc.com> (cherry picked from commit e6e12c39efd54e4fcbd444134bf30e211948a71b) Squashed 2 commits for the Qualcomm ipq806x SOC. Change-Id: I14521d3b2844ddd68112882de81453ce8d19fc16 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6963 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 04:15:08 +0000