summaryrefslogtreecommitdiff
path: root/src/soc/qualcomm/sc7180/Kconfig
AgeCommit message (Collapse)Author
2024-02-18soc: Add SPDX license headers to Kconfig filesMartin Roth
Change-Id: Ie7bc4f3ae00bb9601001dbb71e7c3c84fd4f759a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80596 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-17soc/qualcomm/{sc7180,sc7280}: Allow building without QC blobs repoFelix Singer
Building coreboot for the Qualcomm SoCs SC7180 and SC7280 requires to include the Qualcomm blobs, which requires to accept their license. However, for various reasons it makes sense to build without blobs, e.g. static analysis or just build-testing. So in order to do that, run the steps integrating the Qualcomm blobs into the coreboot binary only if USE_QC_BLOBS is enabled and also remove guards which prevent building related mainboards when USE_QC_BLOBS is not enabled. Change-Id: I249ac477b8f10e7fa0848e967c23a3b3b9bbd27d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79026 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-23sc7180: enable RECOVERY_MRC_CACHEShelley Chen
Enable caching of memory training data for recovery as well as normal mode because memory training is taking too long in recovery as well. This required creating a space in the fmap for RECOVERY_MRC_CACHE. BUG=b:150502246 BRANCH=None TEST=Run power_state:rec twice on lazor. Ensure that on first boot, memory training occurs and on second boot, memory training is skipped. Change-Id: Id9059a8edd7527b0fe6cdc0447920d5ecbdf296e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46651 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-17trogdor/sc7180: Clarify USE_QC_BLOBS requirementsJulius Werner
This patch adds some Kconfig hints to make it clearer that the USE_QC_BLOBS option is required for SC7180 boards and guide the user in the right direction through menuconfig. Also add those little arrows to the Trogdor board options that are there on most other boards. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I973cae8026a229408a1a1817c4808b0266387ea7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-10-13sc7180: Enable bootblock compressionJulius Werner
This patch enables bootblock compression on SC7180. In my tests, that makes it boot roughly 10ms faster (which isn't much, but... might as well take it). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ibbe06eeb05347cc77395681969e6eaf1598b4260 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45855 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09trogdor: Modify DDR training to use mrc_cacheShelley Chen
Currently, trogdor devices have a section RO_DDR_TRAINING that is used to store memory training data. Changing so that we reuse the same mrc_cache API as x86 platforms. This requires renaming RW_DDR_TRAINING to RW_MRC_CACHE and removing RO_DDR_TRAINING in the fmap table. BUG=b:150502246 BRANCH=None TEST=FW_NAME="lazor" emerge-trogdor coreboot chromeos-bootimage Make sure that first boot after flashing does memory training and next boot does not. Boot into recovery two consecutive times and make sure memory training occurs on both boots. Change-Id: I16d429119563707123d538738348c7c4985b7b52 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: Add display hardware pipe line initializationVinod Polimera
Add sc7180 display hardware pipeline programming support and invoke the display initialization from soc_init. Changes in V1: - added display init required check. - added edid read function using i2c communication. - added sn65dsi86 bridge driver to init bridge. - moved display initialization to mainboard file. Changes in V2: - moved diplay init sequence to mainboard file - moved edid read function to bridge driver. - calculated timing paramters using edid parameters. - removed command mode config code. - moved bridge driver to drivers/ti. - seperated out bridge and soc code with mainboard file as interface. Changes in V3: - add GPIO selection at runtime based on boardid. - add vbif register struct overlay. Changes in V4: - update gpio config for lazor board. Change-Id: I7d5e3f1781c48759553243abeb3d694f76cd008e Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: enable bl31T Michael Turney
Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/28014/44 Change-Id: Ia961ee0e30478e21fd786ce464655977449df510 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-02src: Drop redundant 'select BOOTBLOCK_CONSOLE'Elyes HAOUAS
BOOTBLOCK_CONSOLE is already set to yes in console/Kconfig file. Change-Id: I2a4ee517795bc7b378afc5eae92e2799ad36111b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-06-13treewide: Add Kconfig variable MEMLAYOUT_LD_FILEFurquan Shaikh
This change defines a Kconfig variable MEMLAYOUT_LD_FILE which allows SoC/mainboard to provide a linker file for the platform. x86 already provides a default memlayout.ld under src/arch/x86. With this new Kconfig variable, it is possible for the SoC/mainboard code for x86 to provide a custom linker file as well. Makefile.inc is updated for all architectures to use this new Kconfig variable instead of assuming memlayout.ld files under a certain path. All non-x86 boards used memlayout.ld under mainboard directory. However, a lot of these boards were simply including the memlayout from SoC. So, this change also updates these mainboards and SoCs to define the Kconfig as required. BUG=b:155322763 TEST=Verified that abuild with --timeless option results in the same coreboot.rom image for all boards. Change-Id: I6a7f96643ed0519c93967ea2c3bcd881a5d6a4d6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42292 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-21sc7180: Add UART supportT Michael Turney
This implements the UART driver in SoC Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/25373/78 Change-Id: I6494daa108197c030577ac86dab71f9ca6c21bdb Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35500 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-05sc7180: Add SPI-NOR supportAkash Asthana
This implements the SPI-NOR driver for the Qualcomm QSPI core. Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/27483/58 Change-Id: I2eb8cf90aa4559541ba293b3fd2870896bed20b7 Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35501 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01sc7180: support bitbang UART w/gpioT Michael Turney
Change-Id: I21b149500849eceea663d18a0880c6443ae47d9b Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35498 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-21sc7180: Provide initial SoC supportT Michael Turney
Change-Id: Iddcef560c1987486436b73ca1d5fc83cee2f713c Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 00:02:59 +0000