coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2014-11-12	tegra124: Fix PWM pinmux functions	Andrew Chew
	It seems that someone just stuck the PM3 function for all of the potential PWM pins. Fix this to be more specific to the particular PWM (of which there are four). BUG=none TEST=emerge-nyan chromeos-coreboot-nyan Original-Change-Id: Ic61a7321fbe28953b22007a1d0b522c3ca8714ad Original-Signed-off-by: Andrew Chew <achew@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/185739 Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit f19f897fe11a582cc240d98de88c5e2d4dc4e364) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie10173413a5f00e06f5b1803fd93d6cb322cee3d Reviewed-on: http://review.coreboot.org/7399 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-13	tegra124/nyan: display, clock, and other updates	Julius Werner
	tegra124: Set Tx FIFO threshold value to recommended setting Reviewed-on: https://chromium-review.googlesource.com/175200 (cherry picked from commit c8f086711c6ae2db70fc8e0d84b54f5952fbe0ad) tegra124: add CLK_X definitions Reviewed-on: https://chromium-review.googlesource.com/175220 (cherry picked from commit 3f8a844bd2f151e06d82d1a7fac4492c6bc9417d) tegra124: fix incorrect struct member in clk_rst.h Reviewed-on: https://chromium-review.googlesource.com/175270 (cherry picked from commit 967193d5984a086c297988caa580b61cb4d0414c) tegra124: add the _x clocks to clock_enable_clear_reset Reviewed-on: https://chromium-review.googlesource.com/175539 (cherry picked from commit df4c515d73b02061e5c98f51efd50e04b10d63f5) tegra124: add clock support code for graphics. Reviewed-on: https://chromium-review.googlesource.com/175162 (cherry picked from commit b8eb6ab4cdc5a583636c10fa05f947a244f94819) tegra124: Clean up some #defines for DMA Reviewed-on: https://chromium-review.googlesource.com/175631 (cherry picked from commit 1a0a900f2d060916c9878781b82113b16a7945d9) tegra124: enable flow control for APBDMA in SPI driver Reviewed-on: https://chromium-review.googlesource.com/175630 (cherry picked from commit 873e6f9e95f6cb0162fa06216682fbc71ab0202d) nyan: move clock setup for the display out of dca_init Reviewed-on: https://chromium-review.googlesource.com/175656 (cherry picked from commit 32dd9947a60298ff9488c911629802c257ed6afc) tegra124: more display PLL setup and clock hardcode removal. Reviewed-on: https://chromium-review.googlesource.com/175732 (cherry picked from commit 80402876b5daa9e9389fd4fab5f539d89c37fa7f) tegra124: move dp.c from tegra to tegra124 Reviewed-on: https://chromium-review.googlesource.com/175830 (cherry picked from commit e98be569b0ba7f4d565ce677343a317db08344e0) tegra124: clean up tabbing; nyan: add a comment and setting to devicetree.cb Reviewed-on: https://chromium-review.googlesource.com/175889 (cherry picked from commit 4e513196b0014c5a82079f3aa87c2efbeb645484) tegra: get rid of struct members that are not used Reviewed-on: https://chromium-review.googlesource.com/176023 (cherry picked from commit 032b8a0c9fe0152ebc27344e93128865ecb918a6) tegra124: Increase SCLK (AVP) to 300MHz Reviewed-on: https://chromium-review.googlesource.com/175489 (cherry picked from commit 7e082f2c2f030950d652f1f87f637e15dee38552) tegra124: Address old main CPU starting review feedback. Reviewed-on: https://chromium-review.googlesource.com/175933 (cherry picked from commit 1d76ac71bd839dff9198e65132ec25212dd55ffd) tegra124: Revise clock source configuration for irregular peripherals. Reviewed-on: https://chromium-review.googlesource.com/176109 (cherry picked from commit 1021c215190602a2b8c1ab97d6c8313d89597d99) nyan: add timestamps in romstage Reviewed-on: https://chromium-review.googlesource.com/176172 (cherry picked from commit cd626aa10b56cd4da6ebda36fe487e44b08f3935) tegra124: Allow enabling clock output for external peripherals. Reviewed-on: https://chromium-review.googlesource.com/176108 (cherry picked from commit ea9fb6393ee80da77c9fbc30f605859c7009c9ed) nyan: Enable and configure clocks for I2S and audio codec. Reviewed-on: https://chromium-review.googlesource.com/176104 (cherry picked from commit 1fb659b3e73285ff8218c0f229734edd3b979ca4) tegra124: Fix typo in pinmux name. Reviewed-on: https://chromium-review.googlesource.com/176215 (cherry picked from commit c7915ad41a3f1d1452aa6d6d287aaa8eb9e85c34) nyan: Add pinmux settings for audio peripherals. Reviewed-on: https://chromium-review.googlesource.com/176212 (cherry picked from commit 37412f3201590e47a06d4678fa833164d370b41c) nyan: De-array-ify the PMIC setup code. Reviewed-on: https://chromium-review.googlesource.com/176903 (cherry picked from commit 86ab1ce9fbf6d5362af1ee37de1394412366f247) nyan: Add a kconfig for building for the original nyans in pixel cases. Reviewed-on: https://chromium-review.googlesource.com/176904 (cherry picked from commit 1d05fd5bc40d727826510ec81496ce4a49e257ed) nyan: Set the CPU voltage differently depending on which PMIC is in use. Reviewed-on: https://chromium-review.googlesource.com/176905 (cherry picked from commit 31507f6a575220737ee5683b312cd162600f89cc) nyan: Increase the CPU voltage to 1.2V. Reviewed-on: https://chromium-review.googlesource.com/176906 (cherry picked from commit fe4795e66b515c2523df09a8800ecac9a3f63557) tegra124: Flesh out/tidy up the flow controller constants. Reviewed-on: https://chromium-review.googlesource.com/177085 (cherry picked from commit b50d315506a5ab9c81b6bbaf8cf580dbb3e78794) tegra124: When leaving the bootblock/AVP, really stop the AVP. Reviewed-on: https://chromium-review.googlesource.com/177086 (cherry picked from commit 06c10df889d4d935bc99792df860d93766ae44dd) nyan: Set SPI4 speed to 33MHz Reviewed-on: https://chromium-review.googlesource.com/177038 (cherry picked from commit c98de65482fabdb5c76944fe3bf762191b3a0a55) nyan: Do console_init() in romstage Reviewed-on: https://chromium-review.googlesource.com/176763 (cherry picked from commit 0bec32e09eab28bc5ea49b7896a8b6f489143b03) nyan: Add a prompt to the CONFIG_NYAN_IN_A_PIXEL option. Reviewed-on: https://chromium-review.googlesource.com/177486 (cherry picked from commit 7cbb801d000dac4b39f76266ebef2585fe48faba) nyan: Separate the SDRAM BCT config for the two nyans, and turn down norrin. Reviewed-on: https://chromium-review.googlesource.com/177487 (cherry picked from commit 6b119685f6626d79d924af9f856ebb90af45a73f) tegra124: Bump up HCLK and PCLK Reviewed-on: https://chromium-review.googlesource.com/177563 (cherry picked from commit c25337dac8c3ecdd8ffe5b4d11acebb216132405) nyan: Add some code for reading the board ID. Reviewed-on: https://chromium-review.googlesource.com/177488 (cherry picked from commit 5fccbce99e7db312e2e3caf806c438c9b04c0a8f) nyan: Use the board ID to decide how to initialize the PMIC. Reviewed-on: https://chromium-review.googlesource.com/177489 (cherry picked from commit 677bdb9df55248da3a0c6be0089098f6d6807d3c) nyan: Create kconfig variables for each SDRAM config. Reviewed-on: https://chromium-review.googlesource.com/177580 (cherry picked from commit d7ddcf262a321f06289c4f2b2a6b43982dd96377) tegra124: Mux some unused pins away from UARTA, and pull up the serial RX line. Reviewed-on: https://chromium-review.googlesource.com/177637 (cherry picked from commit bd533cc109b0acf3495b04fa6622e250ba454fe9) tegra124: Initialize the MCR when setting up the UART. Reviewed-on: https://chromium-review.googlesource.com/177638 (cherry picked from commit 38c84786fc3e8fab913aebca176ac7b038cb0be6) tegra124: fix SPI AHB burst length Reviewed-on: https://chromium-review.googlesource.com/177564 (cherry picked from commit f29235263202c9b4a3dbb65da5727c8eefe44315) tegra124: remove unneeded debug print in SPI code Reviewed-on: https://chromium-review.googlesource.com/177833 (cherry picked from commit 34a50040268dbde1c326d315f8042a3905ddfb06) nyan: Set up the SOC and TPM reset pin. Reviewed-on: https://chromium-review.googlesource.com/177965 (cherry picked from commit b81a5bd15a2979ee009b9f7bc4a39a304e6a759a) tegra124: Allow some time for packets to appear in Rx FIFO Reviewed-on: https://chromium-review.googlesource.com/177832 (cherry picked from commit 8f70a25b1eea865a448525749ac18393f5b9ad84) nyan: PMIC: Slam default init values for SDOs/LDOs in AS3722 Reviewed-on: https://chromium-review.googlesource.com/178226 (cherry picked from commit c536b0d82fd6fffbc0e2448e0d19d3f06df5d86a) nyan: change devicetree for the new display settings. Reviewed-on: https://chromium-review.googlesource.com/177958 (cherry picked from commit 43abed730f222c8a685c250a58c981268994a65d) nyan: Switch USB VBUS GPIOs from outputs to pulled-up inputs Reviewed-on: https://chromium-review.googlesource.com/178914 (cherry picked from commit e47b6a609b9d23694a466b56960d9d14ca5d6242) Tegra124: nyan: Disable VPR Reviewed-on: https://chromium-review.googlesource.com/179327 (cherry picked from commit 441aa276446141f1b92ed8fb98c9578597487f4d) tegra124: norrin: fix display issue Reviewed-on: https://chromium-review.googlesource.com/179745 (cherry picked from commit c1c1ae69f6058ed901f532e2c532d1e6ba1f81fb) tegra124: Add iRAM layout information. Reviewed-on: https://chromium-review.googlesource.com/179814 (cherry picked from commit d00f135c93a52ad4dced2edecb74e2dfc54bb2fa) tegra124: Run bootblock and ROM stage out of DRAM. Reviewed-on: https://chromium-review.googlesource.com/179822 (cherry picked from commit 2d3ec06ec39a489d02e798bb22bce4d7465b20ce) nyan: clean up a comment regarding video Reviewed-on: https://chromium-review.googlesource.com/180161 (cherry picked from commit 03b5e88a66b9c96df2ef3d9ce5ba4a62a8bb2447) tegra124: norrin: the first step to clean up display code Reviewed-on: https://chromium-review.googlesource.com/180135 (cherry picked from commit 9d0c12dfef28a1161604df9b3fcc113049b2747d) Squashed 49 commits for tegra124/nyan. Change-Id: Id67bfee725e703d3e2d8ac17f40844dc193e901d Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6883 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-19	tegra124: Implement driver code for the pinmux, pingroup controls, and GPIOs.	Gabe Black
	The pins on tegra are controlled by three different units, the pinmux, the pin group controls, and the GPIO banks. Each of these units controls some aspect of the pins, and they layer together and interact in interesting ways. By default, the GPIOs are configured to pass through the special purpose IO that the pinmux is configured to and so can be ignored unless a GPIO is needed. The pinmux controls which special purpose signal passes through, along with pull ups, downs, and whether the output is tristated. The pingroup controls change the parameters of a group of pins which all have to do with a related function unit. The enum which holds constants related to the pinmux is relatively involved and may not be entirely complete or correct due to slightly inconsistent, incomplete, or missing documentation related to the pinmux. Considerable effort has been made to make it as accurate as possible. It includes a constant which is the index into the pinmux control registers for that pin, what each of the functions supported by that pin are, and which GPIO it corresponds to. The GPIO constant is named after the GPIO and is the pinmux register index for the pin for that GPIO. That way, when you need to turn on a GPIO, you can use that constant along with the pinmux manipulating functions to enable its tristate and pull up/down mode in addition to setting up the GPIO controls. Also, while in general I prefer not to use macros or the preprocessor when writing C code, in this case the set of constants in the enums was too large and cumbersome to manage without them. Since they're being used to construct a table in a straightforward way, hopefully their negative aspects will be minimized. In addition to the low level functions in each driver, the GPIO code also includes some high level functions to set up input or output GPIOs since that will probably be a very common thing to want to do. Old-Change-Id: I48efa58d1b5520c0367043cef76b6d3a7a18530d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171806 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 5cd9f17fe0196d13c1e10b8cde0f2d3989b5ae1a) tegra124: Add base address for the pinmux and pingroup registers. There weren't any constants for the pinmux or pingroup registers in the address map header. Old-Change-Id: I52b9042c7506cab0bedd7a734f346cc9fe4ac3fe Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172081 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 79b61016bfd702b0ea5221658305d8bd359f4f62) Squashed two related commits. Change-Id: Ifeb6085128bd53f0ef5f82c930eda66a2b59499b Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6702 Tested-by: build bot (Jenkins)