summaryrefslogtreecommitdiff
path: root/src/soc/nvidia/tegra124/Makefile.inc
AgeCommit message (Collapse)Author
2015-10-11vboot: remove remnants of VBOOT_STUBAaron Durbin
For vboot1 there was an rmodule that was loaded and ran to do the firmware verification. That's no longer used so remove the last vestiges of VBOOT_STUB. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built glados. Change-Id: I6b41544874bef4d84d0f548640114285cad3474e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11817 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22linking: link bootblock.elf with .data and .bss sections againAaron Durbin
Currently coreboot expects the loader to clear the bss section for all stages. i.e. stages don't clear their own bss. On ARM SoCs the BootROM would be responsible for this. To do that one needs to include the bss section data (all zeros) in the bootblock.bin file. This was previously being attempted by keeping the .bss info in the .data section because objcopy happened zero out non-file allocated data section data. Instead go back to linking bootblock with the bss section but mark the bss section as loadable allocatable data. That way it will be included in the binary properly when objcopy -O binary is emplyed. Also do the same for the data section in the case of no non-zero object values are in the data section. Without this change the trick of including .bss in .data was not working when there wasn't a non-zero value object in the data section. BUG=None BRANCH=None TEST=Built emulation/qemu-armv7 and noted bootblock.bin contains the cleared bss. Change-Id: I94bd404c2c4a8b9332393e6224e98940a9cad4a2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11680 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-26coreboot: introduce boot_deviceAaron Durbin
The boot_device is a region_device that represents the device from which coreboot retrieves and boots its stages. The existing cbfs implementations use the boot_device as the intermediary for accessing the CBFS region. Also, there's currently only support for a read-only view of the boot_device. i.e. one cannot write to the boot_device using this view. However, a writable boot_device could be added in the future. Change-Id: Ic0da796ab161b8025c90631be3423ba6473ad31c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10216 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-29kbuild: automatically include SOCsStefan Reinauer
This change switches all SOC vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in soc/Makefile.inc or in soc/<vendor>/Makefile.inc. This means, vendor and SOC directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: Iede26fe184b09c53cec23a545d04953701cbc41d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9799 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-08timer: Add generic udelay() implementationAaron Durbin
Add GENERIC_UDELAY Kconfig option so that a generic udelay() implementation is provided utilizing the monotonic timer. That way each board/chipset doesn't need to duplicate the same udelay(). Additionally, assume that GENERIC_UDELAY implies init_timer() is not required. BUG=None BRANCH=None TEST=Built nyan, ryu, and rambi. May need help testing. Change-Id: I7f511a2324b5aa5d1b2959f4519be85a6a7360e8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1a85fbcad778933d13eaef545135abe7e4de46ed Original-Change-Id: Idd26de19eefc91ee3b0ceddfb1bc2152e19fd8ab Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/219719 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9334 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-24nyans: reduce code duplication in bootblock and romstagesDaisuke Nojiri
this change reduces the code duplication of the bootblock and the romstages for Nyans. BUG=none TEST=Built Nyan, Big, and Blaze. Ran faft on Blaze. BRANCH=none Original-Signed-off-by: dnojiri@chromium.org (Daisuke Nojiri) Original-Change-Id: Ieb9dac3b061a2cf46c63afb2f31eb67ab391ea1a Original-Reviewed-on: https://chromium-review.googlesource.com/214050 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit f3413d39458f03895fe4963a41285f71d81bcf5f) Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I912f63b12321aa26a7add302fc8a6c4e607330ef Reviewed-on: http://review.coreboot.org/8880 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-23vboot2: read secdata and nvdataDaisuke Nojiri
This code ports antirollback module and tpm library from platform/vboot_reference. names are modified to conform to coreboot's style. The rollback_index module is split in a bottom half and top half. The top half contains generic code which hides the underlying storage implementation. The bottom half implements the storage abstraction. With this change, the bottom half is moved to coreboot, while the top half stays in vboot_reference. TEST=Built with USE=+/-vboot2 for Blaze. Built Samus, Link. BUG=none Branch=none Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I77e3ae1a029e09d3cdefe8fd297a3b432bbb9e9e Original-Reviewed-on: https://chromium-review.googlesource.com/206065 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Original-Reviewed-by: Luigi Semenzato <semenzato@chromium.org> (cherry picked from commit 6b66140ac979a991237bf1fe25e0a55244a406d0) Change-Id: Ia3b8f27d6b1c2055e898ce716c4a93782792599c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/8615 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-17coreboot classes: Add dynamic classes to corebootFurquan Shaikh
Provide functionality to create dynamic classes based on program name and the architecture for which the program needs to be compiled/linked. define_class takes program_name and arch as its arguments and adds the program_name to classes-y to create dynamic class and compiler toolset is created for the specified arch. All the files for this program can then be added to program_name-y += .. Ensure that define_class is called before any files are added to the class. Check subdirs-y for order of directory inclusion. One such example of dynamic class is rmodules. Multiple rmodules can be used which need to be compiled for different architectures. With dynamic classes, this is possible. BUG=chrome-os-partner:30784 BRANCH=None TEST=Compiles successfully for nyan, rush and link. Original-Change-Id: I3e3aadbe723d432b9b3500c44bcff578c98f5643 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/209379 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 242bb90d7476c2ee47d60c50ee18785edeb1a295) Some of this cherry-pick had already been committed here: commit 133096b6dc31163f59f658e15f2eb342a0de2ac6 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9f5868d704c4b3251ca6f54afa634588108a788c Reviewed-on: http://review.coreboot.org/8672 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-13nyan: Remove broken setup_display() from romstageJulius Werner
This patch removes a chunk of romstage code from Tegra and all Nyan boards that was supposed to enable some LCD power rails early, but never really worked. The dev_find_slot() function can only find PCI devices, which the CPU cluster is not. Since we're done with Nyan-RO and the ramstage display code is fine as it is, there is no point in trying to fix this... but we should remove it from ToT lest someone uses it as a blueprint to add more dead code to future boards. BRANCH=None BUG=None TEST=None Original-Change-Id: I6eee256873299429d4e3934fe7d454120390f34d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/207720 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit a3df62a3bcefcc20ae59648f5d1f0a01db3c02c6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8deedea5e9787848aae3064509c611bc349313cc Reviewed-on: http://review.coreboot.org/8638 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-02-25tegra124: Clean up ARM UART driver buildMarc Jones
CONFIG_CONSOLE_SERIAL_UART has been updated to CONFIG_DRIVER_UART. The UART may be used for more than serial console. Change-Id: Ife6e6861d210126b2b9ba5eee9ff72e8a447c47f Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/8516 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-27vboot2: implement select_firmware for pre-romstage verificationDaisuke Nojiri
This patch has a basic structure of vboot2 integration. It supports only Nyans, which have bootblock architecture and romstage architecture are compatible from linker's perspective. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I4bbd4d0452604943b376bef20ea8a258820810aa Original-Reviewed-on: https://chromium-review.googlesource.com/204522 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit a6bce0cbed34def60386f3d9aece59e739740c58) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I63ddfbf463c8a83120828ec8ab994f8146f90001 Reviewed-on: http://review.coreboot.org/8160 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-27vboot2: add verstageStefan Reinauer
This reverts the revert commit 5780d6f3876723b94fbe3653c9d87dad6330862e and fixes the build issue that cuased it to be reverted. Verstage will host vboot2 for firmware verification. It's a stage in the sense that it has its own set of toolchains, compiler flags, and includes. This allows us to easily add object files as needed. But it's directly linked to bootblock. This allows us to avoid code duplication for stage loading and jumping (e.g. cbfs driver) for the boards where bootblock has to run in a different architecture (e.g. Tegra124). To avoid name space conflict, verstage symbols are prefixed with verstage_. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac Original-Reviewed-on: https://chromium-review.googlesource.com/204376 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> (cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a83b87c29d98d97ae316091cf3ed7b024e21daf Reviewed-on: http://review.coreboot.org/8224 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-14Revert "vboot2: add verstage"Paul Menzel
This reverts commit 320647abdad1ea6cdceb834933507677020ea388, because it introduced the following regression. $ LANG=C make V=1 Warning: no suitable GCC for arm. Warning: no suitable GCC for aarch64. Warning: no suitable GCC for riscv. /bin/sh: --: invalid option Usage: /bin/sh [GNU long option] [option] ... /bin/sh [GNU long option] [option] script-file ... GNU long options: --debug --debugger --dump-po-strings --dump-strings --help --init-file --login --noediting --noprofile --norc --posix --rcfile --restricted --verbose --version Shell options: -ilrsD or -c command or -O shopt_option (invocation only) -abefhkmnptuvxBCHP or -o option make: -print-libgcc-file-name: Command not found It also introduced trailing whitespace. Change-Id: I50ec00a38e24c854fa926357cd24f9286bf4f66f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8223 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-13vboot2: add verstageDaisuke Nojiri
Verstage will host vboot2 for firmware verification. It's a stage in the sense that it has its own set of toolchains, compiler flags, and includes. This allows us to easily add object files as needed. But it's directly linked to bootblock. This allows us to avoid code duplication for stage loading and jumping (e.g. cbfs driver) for the boards where bootblock has to run in a different architecture (e.g. Tegra124). To avoid name space conflict, verstage symbols are prefixed with verstage_. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac Original-Reviewed-on: https://chromium-review.googlesource.com/204376 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> (cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I42b2b3854a24ef6cda2316eb741ca379f41516e0 Reviewed-on: http://review.coreboot.org/8159 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-30i2c: Add software_i2c driver for I2C debugging and emulationJulius Werner
This patch adds I2C emulation in software through raw toggling of the SDA/SCL lines. Platforms need to provide bindings to toggle their respective I2C busses for this to work (e.g. by pinmuxing them as GPIOs, currently only enabled for Tegra). This is mostly useful as a debugging feature, to drive unusual states on a bus and closely monitor the device output without the need of a bus analyzer. It provides a few functions to "wedge" an I2C bus by aborting a transaction at certain points, which can be used to test if a system can correctly recover from an ill-timed reboot. However, it can also dynamically replace the existing I2C transfer functions and drive some/all I2C transfers on the system, which might be useful if a driver for the actual I2C controller hardware is not (yet) available. Based on original code by Doug Anderson <dianders@chromium.org> and Hung-ying Tyan <tyanh@chromium.org> for the ChromeOS embedded controller project. BRANCH=None BUG=chrome-os-partner:28323 TEST=Spread tegra_software_i2c_init()/tegra_software_i2c_disable() through the code and see that everything still works. Original-Change-Id: I9ee7ccbd1efb38206669a35d0c3318af16f8be63 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198791 Original-Reviewed-by: Doug Anderson <dianders@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8f71503dbbd74c5298e90e2163b67d4efe3e89db) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id6c5f75bb5baaabd62b6b1fc26c2c71d9f1ce682 Reviewed-on: http://review.coreboot.org/7947 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-26tegra124: Add a utility function to read the cause of the most recent reset.Gabe Black
When a watchdog reset happens, the SOC will reset but other parts of the system might not. In order to detect those situations we can check the rst_status register in the PMC. BUG=chrome-os-partner:28559 TEST=With this and a change which uses the new function in the nyan boards, built for nyan, nyan_big and nyan_blaze. Booted normally, through EC reset, software reset ("reboot" command from the terminal), and through watch dog reset. Verified that the new code only triggered during the watchdog reset and that the system rebooted and was able to boot without going into recovery mode unnecessarily. BRANCH=nyan Original-Change-Id: I7430768baa0304d4ec8524957a9cc37078ac5a71 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/198581 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 5fdc0239fc2960167dd9c074f3804bf9e4ad686a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5845d3a4d819868f5472c758e83e83b00e141b72 Reviewed-on: http://review.coreboot.org/7899 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-14tegra124: allow tegra124 devices to run vboot rmoduleAaron Durbin
The non-x86 systems need the monotonic timer interface. Add tegra124's timer implementation so vboot can link. BUG=chrome-os-partner:27094 BRANCH=None TEST=Built nyan with vboot verfication. Original-Change-Id: I75b99b6e07eeab0324495f97472f14a36883161e Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/190925 (cherry picked from commit 1e632e861f0e6d10cea0010561e410c1d6c2f317) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9ef177f7c7bb90ceacfe25162bb97047a7c8599d Reviewed-on: http://review.coreboot.org/7463 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-11-14t124: Clean up display init functionsJimmy Zhang
The existing display init functions were translated from a script. The new code will play the same functions but are cleaner and readable and easier to be ported to new panel. BUG=none TEST=build nyan and boot up kernel. Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: Ic9983e57684a03e206efe3731968ec62905f4ee8 Original-Reviewed-on: https://chromium-review.googlesource.com/189518 Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 5998f991ea3069d603443b93c2ebdcdcd04af961) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Squashed to pass abuild nyan: Fix the build for big and blaze. The display code for the tegra124 was cleaned up recently, but only the nyan device tree was updated to match the new code, not big's or blaze's. This change copies nyan's device tree over to those other two boards which will get them building again. The settings may not be correct, but they'll be no less correct than they were before. I also updated the copyright date for nyan. BUG=none TEST=Built for nyan, nyan_big, nyan_blaze. Booted on nyan_big and verified the panel wasn't damaged by the new display code or settings. BRANCH=None Original-Change-Id: I75055a01f9402b3a9de9a787a9d3e737d25bb515 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191364 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit ea235f23df31b4ca8006dcdf3628eed096e062b9) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Icdad74bf2d013c3677e1a3373b8f89fad99f616e Reviewed-on: http://review.coreboot.org/7454 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-12tegra124: enable JTAG in Security ModeJimmy Zhang
Once SECURITY_MODE fuse is burned, JTAG is disabled by default. To reenable JTAG, besides chip unique id and SecureJtagControl need to be built into BCT, Jtag enable flag is also needed to be set. BUG=None TEST=Burn SECURITY_MODE fuse, build chip specific BCT, coreboot comes up and jtag hooks up fine. Original-Change-Id: Ic6b61be2c09b15541400f9766d486a4fcef192a8 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/186031 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit ff962b81f424c840ef171d4287a65ab79b018a28) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I14b496932dbc0ed184a2212a5b33d740e1f34a4e Reviewed-on: http://review.coreboot.org/7403 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-22tegra/nyan*: sdram updatesTom Warren
nyan_big: Add 204MHz BCT for bringup, use 1.2V for VDD_CPU Reviewed-on: https://chromium-review.googlesource.com/183939 (cherry picked from commit a6df76afb5342b805baca749abb8265e15748dc1) nyan_big: Add initial 792MHz BCT Reviewed-on: https://chromium-review.googlesource.com/183975 (cherry picked from commit 61d0122fdce6dc9479666bb0a5bc079c6389f78a) nyan_big: use RAM_CODE[3:2] for ram code Reviewed-on: https://chromium-review.googlesource.com/184076 (cherry picked from commit 35e5c5e473f871cdc897473a31586afbececd716) tegra124: support tri-state Board Id Reviewed-on: https://chromium-review.googlesource.com/183855 (cherry picked from commit 1a9d1bd73aa2cd0c36203b247976ad0d00a360e4) nyan*: Fix SPI pinmux configuration Reviewed-on: https://chromium-review.googlesource.com/184281 (cherry picked from commit ac4106b673c285af66d72392bd4a8522aba98489) nyan_big: Add 4GB 204/792MHz BCTs Reviewed-on: https://chromium-review.googlesource.com/184159 (cherry picked from commit 5ff002d09f8db0543b58962f6c0d24627fb0937e) tegra124: Add function for obtaining DRAM size via MC regs Reviewed-on: https://chromium-review.googlesource.com/184535 (cherry picked from commit d4580c46de649903a266a99eb11c9126ba385b48) tegra124/nyan*: Obtain DRAM size dynamically Reviewed-on: https://chromium-review.googlesource.com/184431 (cherry picked from commit a7db71744771decc04cf1966efba70bf4897cfa3) tegra124: Rearrange iRAM layout to allow more space for romstage Reviewed-on: https://chromium-review.googlesource.com/184240 (cherry picked from commit 6bdaabbc068146a4516c724b71d31bb777dabcfc) tegra124: Fix MemoryType field name in SDRAM parameters. Reviewed-on: https://chromium-review.googlesource.com/185113 (cherry picked from commit 9caccd1e86a8c683402fab87d9f3a49b87496e97) nyan_big: Initialize SDRAM without BootROM. Reviewed-on: https://chromium-review.googlesource.com/183624 (cherry picked from commit a1cbc00aa80ec1ea52e833a8e31c8e4b27160e70) tegra124: move FB_SIZE_MB to a more appropriate location Reviewed-on: https://chromium-review.googlesource.com/184930 (cherry picked from commit ddea486fd4410394417c4e59039d46a324918bdc) nyan: Initialize SDRAM without BootROM. Reviewed-on: https://chromium-review.googlesource.com/185114 (cherry picked from commit 1ff51b580b28553919f91b11b443251b048cf26b) tegra124: Save SDRAM parameters to PMC registers for LP0 Reviewed-on: https://chromium-review.googlesource.com/182928 (cherry picked from commit 7476b4bd0ecdc312476cce871d22f57915a0bd86) tegra124: Rewrite SDRAM parameter saving code to be more efficient Reviewed-on: https://chromium-review.googlesource.com/184388 (cherry picked from commit 25084bd0407624e4b2ff82388c32af1198c501a6) nyan: Slightly change the way SDRAM parameter files are set up Reviewed-on: https://chromium-review.googlesource.com/185286 (cherry picked from commit a31887b804f23e031c395113db582cd71f3d1b6d) Squashed 16 commits for SDRAM support on nyan and nyan_big. Change-Id: I07419985376277083d62400dd14fe8273f6d5ca8 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6949 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-09-22tegra124/nyan: memory and display updatesAndrew Bresticker
tegra124: use pll_c_out1 as sclk parent Reviewed-on: https://chromium-review.googlesource.com/180865 (cherry picked from commit 418337a5bde70df6a770222201c51bf3e8892d5f) tegra124: take LP cluster out of reset Reviewed-on: https://chromium-review.googlesource.com/180866 (cherry picked from commit 74cdc68ea9b29da9af313635787e82bacb9e23e3) tegra124: norrin: display code clean up Reviewed-on: https://chromium-review.googlesource.com/181003 (cherry picked from commit 63843ec61b3b47ffc985edcb589771591c5c9f17) tegra124: Change the display hack to use window A Reviewed-on: https://chromium-review.googlesource.com/182001 (cherry picked from commit ef245e42eb17b2eb0e8712f252353a95ee6fc01a) tegra124: norrin: Initialize frame buffer Reviewed-on: https://chromium-review.googlesource.com/182090 (cherry picked from commit b7c1d1b3c9519cbbe1615737aed4c4c0efed2167) nyan: do not enable pull-ups on SPI1 (EC) data pins Reviewed-on: https://chromium-review.googlesource.com/181063 (cherry picked from commit 2f55188501ebcae9e01b12831f152d4520c7047c) tegra124: Add source for the LP0 resume blob. Reviewed-on: https://chromium-review.googlesource.com/183152 (cherry picked from commit a00d099bf710c297320d7edff7f7c608283d1b0b) tegra124: Revise Memory Controller registers structure definition. Reviewed-on: https://chromium-review.googlesource.com/182992 (cherry picked from commit ae83564cdd1d46c8166df1a95703e8cb1060c0a1) tegra124: Add more PMC register details. Reviewed-on: https://chromium-review.googlesource.com/183231 (cherry picked from commit d62ed2c19693284f10c2a12f4295091de3ace829) tegra124: Add SDRAM configuration header file from cbootimage. Reviewed-on: https://chromium-review.googlesource.com/182613 (cherry picked from commit 193ed2a104af38f6c41a332a649ce06a3238e0a4) tegra124: Revise sdram_param.h for Coreboot. Reviewed-on: https://chromium-review.googlesource.com/182614 (cherry picked from commit 311b0568c5de627435a5b035a7a1e40ecc2672f8) tegra124: Fix EMC base address. Reviewed-on: https://chromium-review.googlesource.com/183602 (cherry picked from commit 587c8969292ccecfa29c7720bcf24c704ed4ac4e) tegra124: Add EMC registers definition. Reviewed-on: https://chromium-review.googlesource.com/183622 (cherry picked from commit 67a8e5c7e87a1cc6bf006ad806751b549ffd3d5a) tegra124: Never touch MEM(MC)/EMC clocks in ramstage. Reviewed-on: https://chromium-review.googlesource.com/183623 (cherry picked from commit 8e3bb34d4ae37feae89b4a39850b2988a334d023) tegra124: use RAM_CODE[3:2] for ram code Reviewed-on: https://chromium-review.googlesource.com/183833 (cherry picked from commit 0154239467064ffcbdb82fc4c6b629f5d0c3568d) tegra124: Allow setting PLLM (clock for SDRAM). Reviewed-on: https://chromium-review.googlesource.com/183621 (cherry picked from commit a534e5b7c61d655eedd409dbd7780a4f90d40683) tegra124: SDRAM Initialization. Reviewed-on: https://chromium-review.googlesource.com/182615 (cherry picked from commit 5a60ae93b0603ee0d4806132be0360f3b1612bce) tegra124: Get RAM_CODE for SDRAM initialization. Reviewed-on: https://chromium-review.googlesource.com/183781 (cherry picked from commit a5b7ce70525d7ffef3fac90b8eb14b3f3787f4d8) Squashed 18 nyan/tegra commits for memory and display. Change-Id: I59a781ee8dc2fd9c9085373f5a9bb7c8108b094c Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6914 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-09-13tegra124/nyan: display, clock, and other updatesJulius Werner
tegra124: Set Tx FIFO threshold value to recommended setting Reviewed-on: https://chromium-review.googlesource.com/175200 (cherry picked from commit c8f086711c6ae2db70fc8e0d84b54f5952fbe0ad) tegra124: add CLK_X definitions Reviewed-on: https://chromium-review.googlesource.com/175220 (cherry picked from commit 3f8a844bd2f151e06d82d1a7fac4492c6bc9417d) tegra124: fix incorrect struct member in clk_rst.h Reviewed-on: https://chromium-review.googlesource.com/175270 (cherry picked from commit 967193d5984a086c297988caa580b61cb4d0414c) tegra124: add the _x clocks to clock_enable_clear_reset Reviewed-on: https://chromium-review.googlesource.com/175539 (cherry picked from commit df4c515d73b02061e5c98f51efd50e04b10d63f5) tegra124: add clock support code for graphics. Reviewed-on: https://chromium-review.googlesource.com/175162 (cherry picked from commit b8eb6ab4cdc5a583636c10fa05f947a244f94819) tegra124: Clean up some #defines for DMA Reviewed-on: https://chromium-review.googlesource.com/175631 (cherry picked from commit 1a0a900f2d060916c9878781b82113b16a7945d9) tegra124: enable flow control for APBDMA in SPI driver Reviewed-on: https://chromium-review.googlesource.com/175630 (cherry picked from commit 873e6f9e95f6cb0162fa06216682fbc71ab0202d) nyan: move clock setup for the display out of dca_init Reviewed-on: https://chromium-review.googlesource.com/175656 (cherry picked from commit 32dd9947a60298ff9488c911629802c257ed6afc) tegra124: more display PLL setup and clock hardcode removal. Reviewed-on: https://chromium-review.googlesource.com/175732 (cherry picked from commit 80402876b5daa9e9389fd4fab5f539d89c37fa7f) tegra124: move dp.c from tegra to tegra124 Reviewed-on: https://chromium-review.googlesource.com/175830 (cherry picked from commit e98be569b0ba7f4d565ce677343a317db08344e0) tegra124: clean up tabbing; nyan: add a comment and setting to devicetree.cb Reviewed-on: https://chromium-review.googlesource.com/175889 (cherry picked from commit 4e513196b0014c5a82079f3aa87c2efbeb645484) tegra: get rid of struct members that are not used Reviewed-on: https://chromium-review.googlesource.com/176023 (cherry picked from commit 032b8a0c9fe0152ebc27344e93128865ecb918a6) tegra124: Increase SCLK (AVP) to 300MHz Reviewed-on: https://chromium-review.googlesource.com/175489 (cherry picked from commit 7e082f2c2f030950d652f1f87f637e15dee38552) tegra124: Address old main CPU starting review feedback. Reviewed-on: https://chromium-review.googlesource.com/175933 (cherry picked from commit 1d76ac71bd839dff9198e65132ec25212dd55ffd) tegra124: Revise clock source configuration for irregular peripherals. Reviewed-on: https://chromium-review.googlesource.com/176109 (cherry picked from commit 1021c215190602a2b8c1ab97d6c8313d89597d99) nyan: add timestamps in romstage Reviewed-on: https://chromium-review.googlesource.com/176172 (cherry picked from commit cd626aa10b56cd4da6ebda36fe487e44b08f3935) tegra124: Allow enabling clock output for external peripherals. Reviewed-on: https://chromium-review.googlesource.com/176108 (cherry picked from commit ea9fb6393ee80da77c9fbc30f605859c7009c9ed) nyan: Enable and configure clocks for I2S and audio codec. Reviewed-on: https://chromium-review.googlesource.com/176104 (cherry picked from commit 1fb659b3e73285ff8218c0f229734edd3b979ca4) tegra124: Fix typo in pinmux name. Reviewed-on: https://chromium-review.googlesource.com/176215 (cherry picked from commit c7915ad41a3f1d1452aa6d6d287aaa8eb9e85c34) nyan: Add pinmux settings for audio peripherals. Reviewed-on: https://chromium-review.googlesource.com/176212 (cherry picked from commit 37412f3201590e47a06d4678fa833164d370b41c) nyan: De-array-ify the PMIC setup code. Reviewed-on: https://chromium-review.googlesource.com/176903 (cherry picked from commit 86ab1ce9fbf6d5362af1ee37de1394412366f247) nyan: Add a kconfig for building for the original nyans in pixel cases. Reviewed-on: https://chromium-review.googlesource.com/176904 (cherry picked from commit 1d05fd5bc40d727826510ec81496ce4a49e257ed) nyan: Set the CPU voltage differently depending on which PMIC is in use. Reviewed-on: https://chromium-review.googlesource.com/176905 (cherry picked from commit 31507f6a575220737ee5683b312cd162600f89cc) nyan: Increase the CPU voltage to 1.2V. Reviewed-on: https://chromium-review.googlesource.com/176906 (cherry picked from commit fe4795e66b515c2523df09a8800ecac9a3f63557) tegra124: Flesh out/tidy up the flow controller constants. Reviewed-on: https://chromium-review.googlesource.com/177085 (cherry picked from commit b50d315506a5ab9c81b6bbaf8cf580dbb3e78794) tegra124: When leaving the bootblock/AVP, really stop the AVP. Reviewed-on: https://chromium-review.googlesource.com/177086 (cherry picked from commit 06c10df889d4d935bc99792df860d93766ae44dd) nyan: Set SPI4 speed to 33MHz Reviewed-on: https://chromium-review.googlesource.com/177038 (cherry picked from commit c98de65482fabdb5c76944fe3bf762191b3a0a55) nyan: Do console_init() in romstage Reviewed-on: https://chromium-review.googlesource.com/176763 (cherry picked from commit 0bec32e09eab28bc5ea49b7896a8b6f489143b03) nyan: Add a prompt to the CONFIG_NYAN_IN_A_PIXEL option. Reviewed-on: https://chromium-review.googlesource.com/177486 (cherry picked from commit 7cbb801d000dac4b39f76266ebef2585fe48faba) nyan: Separate the SDRAM BCT config for the two nyans, and turn down norrin. Reviewed-on: https://chromium-review.googlesource.com/177487 (cherry picked from commit 6b119685f6626d79d924af9f856ebb90af45a73f) tegra124: Bump up HCLK and PCLK Reviewed-on: https://chromium-review.googlesource.com/177563 (cherry picked from commit c25337dac8c3ecdd8ffe5b4d11acebb216132405) nyan: Add some code for reading the board ID. Reviewed-on: https://chromium-review.googlesource.com/177488 (cherry picked from commit 5fccbce99e7db312e2e3caf806c438c9b04c0a8f) nyan: Use the board ID to decide how to initialize the PMIC. Reviewed-on: https://chromium-review.googlesource.com/177489 (cherry picked from commit 677bdb9df55248da3a0c6be0089098f6d6807d3c) nyan: Create kconfig variables for each SDRAM config. Reviewed-on: https://chromium-review.googlesource.com/177580 (cherry picked from commit d7ddcf262a321f06289c4f2b2a6b43982dd96377) tegra124: Mux some unused pins away from UARTA, and pull up the serial RX line. Reviewed-on: https://chromium-review.googlesource.com/177637 (cherry picked from commit bd533cc109b0acf3495b04fa6622e250ba454fe9) tegra124: Initialize the MCR when setting up the UART. Reviewed-on: https://chromium-review.googlesource.com/177638 (cherry picked from commit 38c84786fc3e8fab913aebca176ac7b038cb0be6) tegra124: fix SPI AHB burst length Reviewed-on: https://chromium-review.googlesource.com/177564 (cherry picked from commit f29235263202c9b4a3dbb65da5727c8eefe44315) tegra124: remove unneeded debug print in SPI code Reviewed-on: https://chromium-review.googlesource.com/177833 (cherry picked from commit 34a50040268dbde1c326d315f8042a3905ddfb06) nyan: Set up the SOC and TPM reset pin. Reviewed-on: https://chromium-review.googlesource.com/177965 (cherry picked from commit b81a5bd15a2979ee009b9f7bc4a39a304e6a759a) tegra124: Allow some time for packets to appear in Rx FIFO Reviewed-on: https://chromium-review.googlesource.com/177832 (cherry picked from commit 8f70a25b1eea865a448525749ac18393f5b9ad84) nyan: PMIC: Slam default init values for SDOs/LDOs in AS3722 Reviewed-on: https://chromium-review.googlesource.com/178226 (cherry picked from commit c536b0d82fd6fffbc0e2448e0d19d3f06df5d86a) nyan: change devicetree for the new display settings. Reviewed-on: https://chromium-review.googlesource.com/177958 (cherry picked from commit 43abed730f222c8a685c250a58c981268994a65d) nyan: Switch USB VBUS GPIOs from outputs to pulled-up inputs Reviewed-on: https://chromium-review.googlesource.com/178914 (cherry picked from commit e47b6a609b9d23694a466b56960d9d14ca5d6242) Tegra124: nyan: Disable VPR Reviewed-on: https://chromium-review.googlesource.com/179327 (cherry picked from commit 441aa276446141f1b92ed8fb98c9578597487f4d) tegra124: norrin: fix display issue Reviewed-on: https://chromium-review.googlesource.com/179745 (cherry picked from commit c1c1ae69f6058ed901f532e2c532d1e6ba1f81fb) tegra124: Add iRAM layout information. Reviewed-on: https://chromium-review.googlesource.com/179814 (cherry picked from commit d00f135c93a52ad4dced2edecb74e2dfc54bb2fa) tegra124: Run bootblock and ROM stage out of DRAM. Reviewed-on: https://chromium-review.googlesource.com/179822 (cherry picked from commit 2d3ec06ec39a489d02e798bb22bce4d7465b20ce) nyan: clean up a comment regarding video Reviewed-on: https://chromium-review.googlesource.com/180161 (cherry picked from commit 03b5e88a66b9c96df2ef3d9ce5ba4a62a8bb2447) tegra124: norrin: the first step to clean up display code Reviewed-on: https://chromium-review.googlesource.com/180135 (cherry picked from commit 9d0c12dfef28a1161604df9b3fcc113049b2747d) Squashed 49 commits for tegra124/nyan. Change-Id: Id67bfee725e703d3e2d8ac17f40844dc193e901d Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6883 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-09-12tegra124/nyan: various fixes and additionsHung-Te Lin
Tegra124: SDMMC: Configure base clock frequency. Reviewed-on: https://chromium-review.googlesource.com/173841 (cherry picked from commit d3157e9a380cfb018cc69a1f23f277c3c5b680a6) Tegra124: SDMMC: Configure pinmux for MMC 3/4. Reviewed-on: https://chromium-review.googlesource.com/174011 (cherry picked from commit 55af9a86a56d6bc0ce9bcff4fd5226a60ae2033b) tegra124: Move DMA-related #defines and definitions to header Reviewed-on: https://chromium-review.googlesource.com/174444 (cherry picked from commit 9d917927a5b7151958289469b9049ac91efa41e3) tegra124: Assign console address for kernel. Reviewed-on: https://chromium-review.googlesource.com/174486 (cherry picked from commit 36e9370f30bd173879958d164156997841ec4e9c) nyan: Fix up the gpio indices in chromeos.c. Reviewed-on: https://chromium-review.googlesource.com/174418 (cherry picked from commit fba4ae1080c19f11abe1205b871ada14db996c61) Nyan: turn on the backlight. Reviewed-on: https://chromium-review.googlesource.com/174533 (cherry picked from commit 12649c9611981dd8d6567ba0238c8b8247c52215) tegra124: Fix the disp1 source field. Reviewed-on: https://chromium-review.googlesource.com/174701 (cherry picked from commit eed380e09075e1eef0bde7d1bb15c4343f30bfe0) nyan: set up the aux channel i2c interface Reviewed-on: https://chromium-review.googlesource.com/174620 (cherry picked from commit ea81cb44a1c11cd78643c69ac818304cd393749e) tegra124: fix typos in the clock code. Reviewed-on: https://chromium-review.googlesource.com/174684 (cherry picked from commit 72365c33693db4eb6e01032938221f592b7e5a02) tegra124: Revamp clock source/divisor configuration Reviewed-on: https://chromium-review.googlesource.com/174804 (cherry picked from commit 3f31a634f69595bcc6a473301d1492c97a767809) tegra: Add gpio_output_open_drain() function Reviewed-on: https://chromium-review.googlesource.com/174650 (cherry picked from commit bc1c28926810e722e9b82339ea0585d083e3fa8c) tegra124: add nvidia-generated files Reviewed-on: https://chromium-review.googlesource.com/174610 (cherry picked from commit 7706f3200f7fc11b7a443f336bff6a37afa94652) nyan: Ignore the dev mode GPIO. Reviewed-on: https://chromium-review.googlesource.com/174837 (cherry picked from commit 9513e608f3063fdb3e9d8bd04e6e5fe35a5bfcee) Tegra124: Add support for the ARM architectural timer. Reviewed-on: https://chromium-review.googlesource.com/174835 (cherry picked from commit 25a91fcf7e79cc450caa59bc6b65f954bb96ac6c) nyan: Initialize the ARM architectural timer in the RAM stage. Reviewed-on: https://chromium-review.googlesource.com/174836 (cherry picked from commit 581f592c12de91c0cf8279ede2850e38dd0cd2e8) tegra124: nyan: Move mainboard level clock stuff into the mainboard source. Reviewed-on: https://chromium-review.googlesource.com/174843 (cherry picked from commit 5ab100b0bad22814261f9b755b59394562c9145a) tegra124: add some explanatory text about U7.1 computations. Reviewed-on: https://chromium-review.googlesource.com/173910 (cherry picked from commit 822cad0ceeceeb5160c8216e05eec13fd04a6413) Set the EC SPI clock source to PLLP and divide down to around 5MHz Reviewed-on: https://chromium-review.googlesource.com/173954 (cherry picked from commit c0e22d76d3887ca1f727443a47db38dec12c0b74) nyan: Move non-essential configuration out of bootblock and into ram stage. Reviewed-on: https://chromium-review.googlesource.com/174844 (cherry picked from commit dad7f68c76f7b83edacd8b22c9dbd3f0ff027397) tegra124: clocks: Save some IOs in clock_enable_clear_reset. Reviewed-on: https://chromium-review.googlesource.com/174845 (cherry picked from commit 81b977a2758d42471667e2cbe31f160dfda5bca4) tegra124: re-write SPI driver w/ full duplex support Reviewed-on: https://chromium-review.googlesource.com/174446 (cherry picked from commit 51c9a34240d6a068780a7d1c27b032b56b2d3e54) tegra124: move SPI-related structures from .c to .h Reviewed-on: https://chromium-review.googlesource.com/174637 (cherry picked from commit 36760a4463c2c33f494ca7ea5a36810fa4502058) tegra124: add frame header info to SPI channel struct Reviewed-on: https://chromium-review.googlesource.com/174638 (cherry picked from commit e24773eb946e2c4cb5e828f055d45d92bd1a4f9f) tegra124: re-factor tegra_spi_init() Reviewed-on: https://chromium-review.googlesource.com/174639 (cherry picked from commit 88354b996459a702c36604f5f92c24e63df8de7e) nyan: Set CrOS EC frame header parameters for SPI Reviewed-on: https://chromium-review.googlesource.com/174710 (cherry picked from commit 29173ba5863eebb2864a8384435cde2f0d5ca233) tegra124: Add Rx frame header support to SPI code Reviewed-on: https://chromium-review.googlesource.com/174711 (cherry picked from commit 1d1630e770804649ef74d31db194d3bde9968832) tegra124: add support for the Serial Output Resource (sor) Reviewed-on: https://chromium-review.googlesource.com/174612 (cherry picked from commit 3eebd10afea4498380582e04560af89126911ed9) nyan: tegra124: Enable I, D and L2 caches in romstage. Reviewed-on: https://chromium-review.googlesource.com/173777 (cherry picked from commit 74512b7ecfbd50f01a25677307084699ee8c6007) tegra and tegra124: Bring up graphics Reviewed-on: https://chromium-review.googlesource.com/174613 (cherry picked from commit 7e944208a176cdac44a31e2a9961c8bd5dc4ece8) nyan: Move the DMA memory region. Reviewed-on: https://chromium-review.googlesource.com/174953 (cherry picked from commit c66e22859252eaebceb07a3118ac61f4cf6289eb) tegra124: Increase CBFS cache buffer size Reviewed-on: https://chromium-review.googlesource.com/174950 (cherry picked from commit 6dbb4e5f0d66c68df45ac73e3f223b856b715026) tegra124: Add USB PLL, PHY and EHCI setup code Reviewed-on: https://chromium-review.googlesource.com/174651 (cherry picked from commit ecd5c398ff6748a7d40089019471357b58d3a6ea) tegra124: add in some undocument clock source and PLL registers Reviewed-on: https://chromium-review.googlesource.com/174948 (cherry picked from commit 73fcc4981da6e4415b514eaafb42bc265ab0cd9a) tegra124: small cleanups of the code Reviewed-on: https://chromium-review.googlesource.com/174995 (cherry picked from commit 7256aba07e9567ef8d73f05e1f80c4d45fd57bda) Squashed 34 commits for tegra124 / nyan support. Change-Id: I050c7ad962e0d24550b0b33c9318e89c80d01f00 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6870 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2014-09-11tegra124/nyan: rougly stable code baseGabe Black
nyan: Clock setup. Reviewed-on: https://chromium-review.googlesource.com/172106 (cherry picked from commit 3697b6454c0aceebcf735436de90ba2441c9b7b1) tegra124: Call into the mainboard bootblock init if one exists. Reviewed-on: https://chromium-review.googlesource.com/172581 (cherry picked from commit 3a0cd48a0d1a9ce6b32ed614cd81fb81f5f82aec) nyan: Add a mainboard specific bootblock. Reviewed-on: https://chromium-review.googlesource.com/172582 (cherry picked from commit a83d065d660a26fe71ed79879c25f84a1b669f69) nyan: tegra124: Redestribute the clock code between the mainboard and soc. Reviewed-on: https://chromium-review.googlesource.com/172583 (cherry picked from commit ea703137fc37befa7d5a65afc982e298a0daca1b) nyan: Initialize the i2c pins and controllers. Reviewed-on: https://chromium-review.googlesource.com/172584 (cherry picked from commit 9c10a3074ef834688fea46c03551c2e3e54e44a8) nyan: Initialize the PMIC. Reviewed-on: https://chromium-review.googlesource.com/172585 (cherry picked from commit f6be8b0e607e05b73b5e4a84afcf04c879eee88a) tegra124: add a chip.h and use it in NYAN Reviewed-on: https://chromium-review.googlesource.com/172773 (cherry picked from commit 4dd5f1f091f2dcae5ce38203bb86c62994609f8f) tegra: Reorder GPIO register accesses to avoid glitching Reviewed-on: https://chromium-review.googlesource.com/172730 (cherry picked from commit 61bedbf0f839e19b284d21af2ad10f2ff15e17d5) tegra: Turn GPIO wrappers into macros to make them easier to write Reviewed-on: https://chromium-review.googlesource.com/172731 (cherry picked from commit 94550fdfa5a8005d2e6a313041de212ab7ac470c) tegra: Change GPIO functions to allow variable arguments Reviewed-on: https://chromium-review.googlesource.com/172916 (cherry picked from commit e95ccd984f718a04b6067ff6ad5049a2cd74466d) tegra124: Implement starting up the main CPUs. Reviewed-on: https://chromium-review.googlesource.com/172917 (cherry picked from commit 7c5169a197310e18a3df0f176c499669e3c2bda3) tegra: Simplify the I2C constants. Reviewed-on: https://chromium-review.googlesource.com/172953 (cherry picked from commit 130a07c86dfa5ba5ac4580f29db927c91f045c76) tegra124: Fix SPI base addresses Reviewed-on: https://chromium-review.googlesource.com/173322 (cherry picked from commit da808e46919ebd3b9f2377a5889f0d5f10b92357) tegra124: Scrub the clock constants. Reviewed-on: https://chromium-review.googlesource.com/172954 (cherry picked from commit 9305ff0696a6d556a97f928b8683770833a309a4) tegra124: add DMA support Reviewed-on: https://chromium-review.googlesource.com/172951 (cherry picked from commit 4d2a5a56b922ac37d2326d7b139697567aac37b8) tegra124: add basic SPI driver Reviewed-on: https://chromium-review.googlesource.com/172952 (cherry picked from commit 5f861f13c7fd2dd881f3cbd0f1b4d4a9994ce429) tegra124: Add an assembly stub which is run first on the main CPUs. Reviewed-on: https://chromium-review.googlesource.com/173541 (cherry picked from commit e142b9572a89f43fe984c4fc87e3203f380ff4de) nyan: tegra124: Set up dynamic cbmem. Reviewed-on: https://chromium-review.googlesource.com/173542 (cherry picked from commit b6e1a70103446abb5c3440f145617e6566879c6f) tegra124: Add an soc.c which sets up the chip operations and memory resource. Reviewed-on: https://chromium-review.googlesource.com/173543 (cherry picked from commit af49a5bd1f589cf053c4808510138aae26e20db4) tegra124: extend chip.h to include video settings Reviewed-on: https://chromium-review.googlesource.com/173600 (cherry picked from commit 87687633a2116f58fad7333b3b639cee9089ad29) tegra124 and nyan: fill in the devicetree a bit more, add defines Reviewed-on: https://chromium-review.googlesource.com/173684 (cherry picked from commit c107eaca3dea42be89f61690d0d6cb2181acb147) tegra124: clean-ups for SPI driver Reviewed-on: https://chromium-review.googlesource.com/173599 (cherry picked from commit 1e2f9fd442ea336bf0663c3c8ea51f771e21beb7) tegra124: add a #define for DMA alignment size Reviewed-on: https://chromium-review.googlesource.com/173638 (cherry picked from commit f9dc2a8d8016fa7db974fb6cb01c3275e26832af) tegra124: Add FIFO transmit functions to SPI driver Reviewed-on: https://chromium-review.googlesource.com/173639 (cherry picked from commit 97e61f36ad96ce2f9b12a7ef765ee73d3f4285f7) tegra124: clean-ups for DMA driver Reviewed-on: https://chromium-review.googlesource.com/173598 (cherry picked from commit 750c0a5d6942748dd21f3a3f884ad94a561e86e0) tegra124: early display and display code. Reviewed-on: https://chromium-review.googlesource.com/173622 (cherry picked from commit 651c7ab96b1f136865e4673a120de7afc1218558) tegra124: Move transfer size handling to spi_xfer() Reviewed-on: https://chromium-review.googlesource.com/173680 (cherry picked from commit 4a9b7b47b3c09d70063ea843054ffef98f554621) tegra124: strict error detection and reporting for SPI Reviewed-on: https://chromium-review.googlesource.com/173681 (cherry picked from commit c056fa954e1dab40a56faec6c50385763a2eb010) tegra124: add thread-friendly delays to SPI driver Reviewed-on: https://chromium-review.googlesource.com/173648 (cherry picked from commit c1a321c8f61942801627f895c5db74c518e2aa8e) Tegra124: Take the SPI1 controller out of reset and enable its clock. Reviewed-on: https://chromium-review.googlesource.com/173787 (cherry picked from commit c026a3fb861e157f1e17a121fc2ef70b903f36f2) tegra124: add two more clock setting values Reviewed-on: https://chromium-review.googlesource.com/173772 (cherry picked from commit 7d79d7dd9f0c1fd7127a7ba41652d809ccff7a57) nyan: Set up the ChromeOS related GPIOs and SPI bus 1 which goes to the EC. Reviewed-on: https://chromium-review.googlesource.com/173788 (cherry picked from commit ff172bfe30f75983a1e8efa2ead0a4519583d0a8) tegra124: Add some stub functions to the Tegra SPI driver. Reviewed-on: https://chromium-review.googlesource.com/173789 (cherry picked from commit 8bc527aa4afd301c046b0e844c7fa400630af0d2) tegra124: Build source files into the various stges needed by CONFIG_CHROMEOS. Reviewed-on: https://chromium-review.googlesource.com/173790 (cherry picked from commit 86a6423b668ca912295c47d8c6e3ef6c6f8c6084) nyan: Implement the code which reads GPIOs for ChromeOS. Reviewed-on: https://chromium-review.googlesource.com/173791 (cherry picked from commit 4c394dfbce762574fc79edcb6e4ac6bf346e48a3) nyan: Enable the CHROMEOS and ChromeOS EC related kconfig options. Reviewed-on: https://chromium-review.googlesource.com/173792 (cherry picked from commit 2845a4487159aa4b1dba58d977f52c449574fc8e) Tegra124: SDMMC: Take the SDMMC 3 and 4 out of reset and ungate their clocks. Reviewed-on: https://chromium-review.googlesource.com/173793 (cherry picked from commit c238b87bcd9d35afd828476d6ee88322ac5d0f88) tegra124: fix clear_fifo_status() in SPI driver Reviewed-on: https://chromium-review.googlesource.com/173738 (cherry picked from commit f415d2c0aaffc0f1a3592551a2db782d538f8f4f) ARM: Include stdint.h in cpu.h. Reviewed-on: https://chromium-review.googlesource.com/173774 (cherry picked from commit f1930faea3f14b2a2560a6c4058ef38532b6f1a6) tegra124: When setting up the main CPU, set its CPSR appropriately. Reviewed-on: https://chromium-review.googlesource.com/173775 (cherry picked from commit bc2ba9c15cfd22aeaca4f80b1d13a8b5e0178ead) tegra124: fix wrong names in clk_rst.h Reviewed-on: https://chromium-review.googlesource.com/173955 (cherry picked from commit 19dd9c85e4a3d1f77b23828bcbdd4bd8c2688b8d) tegra124: Fix up the PLLX divider table. Reviewed-on: https://chromium-review.googlesource.com/173778 (cherry picked from commit 3362cf3a7d6f5eaec879dda42323345922f6df17) tegra124: clock: Get rid of cpcon and dccon. Reviewed-on: https://chromium-review.googlesource.com/173779 (cherry picked from commit 08626ffac4a7e9ea3d4738af87e9e4cced7be2c7) Tegra124: SPI: Set and unset CS in spi_claim_bus and spi_release_bus. Reviewed-on: https://chromium-review.googlesource.com/173953 (cherry picked from commit a2df8f3a9c9c54c62d6ff37d3baff1d30ee6d355) armv7: expose dcache_line_bytes() in cache API Reviewed-on: https://chromium-review.googlesource.com/173975 (cherry picked from commit 6727f65702c7668fcb33848b4113bc3d3cc04e12) libpayload: expose dcache_line_bytes() in ARM cache API Reviewed-on: https://chromium-review.googlesource.com/174099 (cherry picked from commit 9387b02dff85b42944d95c3bccf59059c93fb4a9) armv4: add a stub for dcache_line_bytes() Reviewed-on: https://chromium-review.googlesource.com/173976 (cherry picked from commit 924f61ea895b9268c716791466637009bbac6469) tegra124: Base early UART on CLK_M to enable debugging of PLL init code Reviewed-on: https://chromium-review.googlesource.com/174339 (cherry picked from commit 8d9387432f0a0d9b257b040304238e543cced1aa) tegra124: Add additional PLLs and redesign the divisor table Reviewed-on: https://chromium-review.googlesource.com/174380 (cherry picked from commit f6a5f5c4562f1ca733505717c175be00413f2384) Squashed 49 commits for tegra124/nyan that included a lot of churn on different pieces. Change-Id: I00e8f5b74e835e01b28ca2e9c4af3709c9363d56 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6869 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-09-10tegra124: Make tegra124 compilable with serial turned off.Gabe Black
The bootblock and romstage UART consoles were being built in based only on whether or not the bootblock and romstage consoles were selected, ignoring whether serial console support was compiled in generally. Change-Id: I3866519c422a990c44ced66885108eff24894563 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172580 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit a4f2dd4902a05884693e6e350b6be29276d16981) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6862 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-09-10nvidia-cbootimage: integrate into coreboot makeIsaac Christensen
Add rules for building the nvidia-cbootimage utility and add dependencies to the tegra124 platform. Change-Id: Ia9f26981bccd217fe79e1b5dd432ee7da868d22a Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6851 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-09-09tegra124: Switch the bootblock over the ARMv4 impelementation.Gabe Black
The bootblock for the tegra124 runs on the AVP coprocessor which uses the ARMv4 architecture. Switch it over to that architecture. Change-Id: Ie527bbff938e6148c58727d448f9c2e6862da872 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171402 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit c1aa76b7607ee40ff848628971a97eea5393aebe) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6784 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-08-29tegra124: add custom uartGabe Black
tegra124: Add a test function which spams exclamation points on the UART. This function spews characters on the console and, until we have a working console, is an easy way to see whether the system boots to a particular point. For some reason waiting for transmitter to be empty hangs, but transmitting characters still works. Old-Change-Id: I1622c8a58849f4b8bdcaa67500b81042d7346df4 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171030 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit e0059181958cfe8afec2f3a7ea732e81f5d55e5d) tegra124: Re-enable waiting for the transmitter to empty in the test function. The compiler was emitting code compatible with armv7-a, but the bootblock was running on a core which uses armv4t. By coincidence, it was emitting an instruction which is unavailable on armv4t when checking the value of the UART's LSR register. Now that the bootblock is compiled with more appropriate flags, this code can be re-introduced. Old-Change-Id: I7ecada4138b0889b963d1a8b19a4bab8e0bb1add Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/170997 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 2a0adceb5029c8ee633d17c82dbb11e48d30349d) tegra124: Seperate out the non-UART specific hardcoded init in the bootblock. The hardcoded init in the test function in the bootblock is actually useful generally because it doesn't belong in the UART driver itself but is necessary for the UART to work. Until we have real implementations for the pinmux, etc., we can use that code to get the UART and console going. Old-Change-Id: I2efe0b571d8b022eb2a2e5569620558540b28373 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171334 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit ae7d4d890be1936cc86dc15adeb33f3b46a51ae5) tegra124: Implement and enable serial console support for tegra124. The driver is very similar to the 8250 driver, except it isn't in two parts, and it also spaces its registers 4 bytes apart instead of having them directly adjacent to each other. Also, eliminate the UART test function in the bootblock. It's no longer needed since the actual console output serves the same purpose. Right now the clock divisor is fixed for now, and we'll want to actually figure out what value to use at some point. Old-Change-Id: Idd659222901eb76b0ed8cbb986deb5124096f2f6 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171337 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 86f5e2875b18901b349283cfbcd4f8cc88b7a019) Squashed 4 commits related to uart support for tegra124. Modified the new uart.c to look like the uart.c for exynos5420. Change-Id: I490cba014a43d58c30c48ca9ddcae2b00095b7a6 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6764 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-28tegra124: Add a custom bootblock implementation.Gabe Black
This implementation is the same as the general one except that it removes all the things that don't work on an ARMv4. Change-Id: I1108a79cc656b26f7d48df20aef3016cf5ae3182 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171019 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit d1436288d3b025af27a8d28ba94b589940ead504) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6713 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-22ARM: Overhaul the ARM Makefile.Gabe Black
The ARM Makefile was copied from x86 and then modified, and as a result it was carrying a lot of baggage. On top of that, the extra complication made it inflexible, and we need a lot of flexiblity in order to support the fact that the Tegra124 starts on an ARMv4 coprocessor instead of one of the ARMv7 main CPUs. Change-Id: Ia6ddc27619bdb51e152ad0c628ad6f3037c103ce Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171017 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 512d942788336c8d52470135b43ee4e6a1c95f6c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6709 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-19tegra124: Implement the tegra i2c driver.Gabe Black
This uses the packet mode of the controller since that allows transfering more data at a time. Change-Id: I8329e5f915123cb55464fc28f7df9f9037b0446d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172402 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 4444cd626a55c8c2486cda6ac9cfece4e53dd0d3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6703 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-19tegra124: Implement driver code for the pinmux, pingroup controls, and GPIOs.Gabe Black
The pins on tegra are controlled by three different units, the pinmux, the pin group controls, and the GPIO banks. Each of these units controls some aspect of the pins, and they layer together and interact in interesting ways. By default, the GPIOs are configured to pass through the special purpose IO that the pinmux is configured to and so can be ignored unless a GPIO is needed. The pinmux controls which special purpose signal passes through, along with pull ups, downs, and whether the output is tristated. The pingroup controls change the parameters of a group of pins which all have to do with a related function unit. The enum which holds constants related to the pinmux is relatively involved and may not be entirely complete or correct due to slightly inconsistent, incomplete, or missing documentation related to the pinmux. Considerable effort has been made to make it as accurate as possible. It includes a constant which is the index into the pinmux control registers for that pin, what each of the functions supported by that pin are, and which GPIO it corresponds to. The GPIO constant is named after the GPIO and is the pinmux register index for the pin for that GPIO. That way, when you need to turn on a GPIO, you can use that constant along with the pinmux manipulating functions to enable its tristate and pull up/down mode in addition to setting up the GPIO controls. Also, while in general I prefer not to use macros or the preprocessor when writing C code, in this case the set of constants in the enums was too large and cumbersome to manage without them. Since they're being used to construct a table in a straightforward way, hopefully their negative aspects will be minimized. In addition to the low level functions in each driver, the GPIO code also includes some high level functions to set up input or output GPIOs since that will probably be a very common thing to want to do. Old-Change-Id: I48efa58d1b5520c0367043cef76b6d3a7a18530d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171806 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 5cd9f17fe0196d13c1e10b8cde0f2d3989b5ae1a) tegra124: Add base address for the pinmux and pingroup registers. There weren't any constants for the pinmux or pingroup registers in the address map header. Old-Change-Id: I52b9042c7506cab0bedd7a734f346cc9fe4ac3fe Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172081 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 79b61016bfd702b0ea5221658305d8bd359f4f62) Squashed two related commits. Change-Id: Ifeb6085128bd53f0ef5f82c930eda66a2b59499b Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6702 Tested-by: build bot (Jenkins)
2014-08-18tegra: Change how tegra124 and tegra include files from each other.Gabe Black
A problem with including the tegra124 directory directly in the include path is that it makes all headers in that directory first level headers available everywhere including places that have nothing to do with the SOC, even headers which were only intended for local use by tegra124 code. This change modifies things a bit to be more like the way the arch headers are chosen. In the tegra124 directory, there's an include directory which has an soc subdirectory in it. That include directory is added to the include path, making it possible to have headers private to the tegra124. When files specific to whatever tegra is being built for are needed, you can include <soc/foo.h> and get the version specific to that particular soc. Also, the soc.h header file was overhauled to use enums instead of defines, to consistently name things as far as their prefix (the less cryptic TEGRA instead of NV_PA) and suffixes like "BASE", and to get rid of values which were specific to U-Boot which we don't need. Since the only thing in the file were address constants, I also renamed the file addressmap.h. It would be included as: <soc/addressmap.h> which I think is easy to remember, does what you'd think it does from the name, and won't conflict with other header files just minding their own business in some other directory. Change-Id: I6a1be1ba28417b7103ad8584e6ec5024a7ff4e55 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172080 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Ronald Minnich <rminnich@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 2c554f58f9ee18e151e824f01c03eb3f0e907858) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6659 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-13Tegra,Tegra124: proposed layout for file hierarchy with exampleRonald G. Minnich
This change shows the source structure for nvidia Tegra and Tegra124 SOC. The problem we are trying to solve is that there is a large amount of common code in the form of .c and .h files across many different Tegra SOCs. The solution is to provide common code in a single directory, but not to compile in the common code directory; rather, we compile in a directory for a given SOC. Different SOCs will sometimes need different bits of code from the common directory. Tegra common code lives in tegra/, but there is no makefile there: if a Tegra common file is needed in a SOC, it is referenced via a Makefile in a specific Tegra SOC. Another issue is includes. Include files in the common directory might be accessed by a piece of code in an SOC directory. More problematically, code in the common directory might require a file in an SOC directory. We don't want to put the SOC name in an #include path, e.g. in a C file in tegra/ is very undesirable, since we might be compiling for a tegra114. On some systems this is solved by a pre-pass which creates a set of symbolic links; on others with nested #ifdef in the common code which include different .h files depending on CPP variables. In previous years, both LinuxBIOS and coreboot have tried these solutions and found them inconvenient and error-prone. We choose to solve it by requiring explicit naming of part of the path of files that are in the common directory. This requirement, coupled with two -I directives in the Makefile.inc, allows common and SOC C code to incorporate both common and SOC .h files. .c and .h files -- SOC or common -- name include files in the common directory with the prefix tegra/, e.g. SOC files will be included from the SOC directory if they have no prefix: The full patch of clock.h will depend on what SOC is being compiled, which is desirable. In this way, a common file can pick up a specific SOC file without creating symlinks or other such tricky magic. We show this usage with one file, soc/nvidia/tega124/clock.c. This compiles. The last question is where to put the prototype for the function defined in this file -- soc.h? Change-Id: Iecb635cec70f24a5b3e18caeda09d04a00d29409 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://chromium-review.googlesource.com/171569 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 53e3bed868953f3da588ec90661d316a6482e27e) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6621 Tested-by: build bot (Jenkins)
2014-08-12tegra124: Add some make rules which will wrap the bootblock in the BCT.Gabe Black
These rules slip into the normal bootblock preperation process and use the cbootimage utility to wrap it in a BCT. Change-Id: I8cf2a3fb6e9f1d792d536c533d4813acfb550cea Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/170924 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit cf4a9b0712c21b885bb59310671fb87e38abb665) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6618 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-05tegra124: Add a stub implementation of the tegra124 SOC.Gabe Black
Most things still needs to be filled in, but this will allow us to build boards which use this SOC. Change-Id: Ic790685a78193ccb223f4d9355bd3db57812af39 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/170836 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 462456fd00164c10c80eff72240226a04445fe60) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6431 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 06:40:11 +0000