| Age | Commit message (Collapse) | Author |
|---|
|
It's helpful to be able to track this information. Therefore
dump it in to the console log.
BRANCH=None
BUG=chrome-os-partner:31126
TEST=Built and ran on rush. Revision information is put out on the
console.
Change-Id: I22e7d222259c1179b90edda6d7807559357f6725
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 18d318331b696a6a32e0a45b8f903eb740896b02
Original-Change-Id: Ic95382126a6b8929d0998d1c9adfcbd10e90663f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210903
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8905
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable pinmux clamp function to avoid pinmux conflict.
For pins which are configured to tristate enabled, the inputs to the
controller will be clamped to zero. This can be used to avoid pinmux
conflicts since the tristate bit is set to 1 in the power-on-reset
pinmux setting.
With pinmux clamp enabled, we need to configure all the input pins
to tristate disabled.
BUG=chrome-os-partner:27091
BRANCH=None
TEST=built and booted successfully, display worked fine.
Original-Change-Id: Id79a717f2025c812908c7152d439351208aee8d2
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194060
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c95d6fe79810612cfad721667657cdcb87068d23)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1b23df8b90f83ea2b2c08c4364d90fe71533a5a0
Reviewed-on: http://review.coreboot.org/7775
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Once SECURITY_MODE fuse is burned, JTAG is disabled by default.
To reenable JTAG, besides chip unique id and SecureJtagControl need
to be built into BCT, Jtag enable flag is also needed to be set.
BUG=None
TEST=Burn SECURITY_MODE fuse, build chip specific BCT, coreboot
comes up and jtag hooks up fine.
Original-Change-Id: Ic6b61be2c09b15541400f9766d486a4fcef192a8
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/186031
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit ff962b81f424c840ef171d4287a65ab79b018a28)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I14b496932dbc0ed184a2212a5b33d740e1f34a4e
Reviewed-on: http://review.coreboot.org/7403
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
