summaryrefslogtreecommitdiff
path: root/src/soc/mediatek
AgeCommit message (Collapse)Author
2022-10-25soc/mediatek/mt8188: Add ddp driver to support eDP outputNathan Lu
Add DDP (display data path) driver that supports overlay, read/write DMA, etc. The output goes to display interface DP_INTF0 directly. Add ddp gclast and output_clamp settings to MT8188 to support multi-layer display. BUG=b:244208960 TEST=emerge-geralt coreboot. Signed-off-by: Nathan Lu <nathan.lu@mediatek.com> Change-Id: Icc0a878c609818fedd298c141bb39469fd2f6388 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68487 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-25soc/mediatek/mt8188: Rename SPM registerBo-Chen Chen
The SPM register at offset 0x0 is often named as poweron_config_set in previous MediaTek SoCs. To use common driver, we rename it from poweron_config_en to poweron_config_set. BUG=none TEST=emerge-geralt coreboot. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I31dbf09d668844d3ee74790c657a2ab076e8cdf0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68486 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-25soc/mediatek: Add support for input 1P mode of dp_intfRex-BC Chen
MT8195 supports 2P mode and MT8188 supports 1P mode. A new struct member `input_mode` is added to `struct mtk_dpintf` for differentiation. We also move SoC-specific data `dpintf_data` to soc folder. BUG=b:244208960 TEST=emerge-cherry coreboot. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I6d138b0ff75e005518bc8fcce06df20924b2a6ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/68485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2022-10-25soc/mediatek: Move DP drivers to commonBo-Chen Chen
DP drivers can be shared for both MT8195 and MT8188, so move them to common folder. BUG=b:244208960 TEST=emerge-cherry coreboot. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ic80c03aa6b13e6c9c39fd63b5c1c1cbdbe93a7c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-10-21soc/mediatek: Unify PLL function namesRex-BC Chen
For consistency with the PLL function naming: - Rename edp_mux_set_sel() to mt_pll_edp_mux_set_sel(). - Rename mux_set_sel() to pll_mux_set_sel(). BUG=none TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ifc7b14bf0db5a5461037e2fbf41756d1542ca945 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68622 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add support for PMIC MT6315Sen Chu
On MT8186T, the big cores are powered on by MT6315 via PMIF. This patch adds the following changes. - Add MT6315 settings. - Configure PMIC PMIF for MT6315. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id01931e564b0b5002b8d6b9d13d4f32cdf0ae708 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68620 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek: Move SPMI interface configuration to SoC folderSen Chu
The SPMI interface configuration is SoC-dependent. - MT8192 and MT8195 are the same. - MT8186 does not need to implement this. - MT8188 is different from MT8195, and we will submit another patch to fix this. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I4cf508a0690995a7fe7b7316269d07cb7a799191 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68619 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add PMIF_SPMI_IOCFG_DEFAULT_SETTING Kconfig optionRex-BC Chen
For MT8186, PMIF_SPMI mode is the hardware default setting, so we don't need to configure PMIF SPMI IO pins. Add a config to control that. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I92b54e8379a5dec55ef95cbd72ce03abd3a4954b Reviewed-on: https://review.coreboot.org/c/coreboot/+/68578 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add PWRAP_WITH_PMIF_SPMI Kconfig optionRex-BC Chen
On MT8186, PMIC interface supports PWRAP and PMIF_SPMI while other MediaTek SoCs support PMIF_SPMI and PMIF_SPI. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I20efa6d84975d781972af9143c0c7e3a272653e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68577 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add support for reading CPU IDRex-BC Chen
MT8186 has two slightly different versions: MT8186G and MT8186T (turbo version). Add get_cpu_id() to identify different CPUs. BUG=b:249436110 TEST=cpu id is correct. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I0612dd589e11853dbddc1d99526e9c9bf170acec Reviewed-on: https://review.coreboot.org/c/coreboot/+/68576 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Add DEVAPC settings for ADSPTinghan Shen
Add DEVAPC permission settings for ADSP and set its domain number to 6. TEST=SOF driver is functional. BUG=b:204229221 Change-Id: I37bfea70386af953e89f3c38ac51e41af6aafa6e Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68290 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Inititalize ADSPTinghan Shen
To use SOF correctly, we need to initialize ADSP in coreboot stage. TEST=SOF driver is functional. BUG=b:204229221 Change-Id: I45db587252ccdcdf75e0be2029743034a79925c5 Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68289 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Add mtcmos power-on control for ADSPMandy Liu
To use SOF correctly, we need to enable power domain of ADSP. TEST=SOF driver is functional. BUG=b:204229221 Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Change-Id: I39d1357af5f901a91379fdf7e595f16952b962de Reviewed-on: https://review.coreboot.org/c/coreboot/+/68288 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Enable ADSP clockMandy Liu
To use SOF correctly, we need to enable ADSP clock. TEST=SOF driver is functional. BUG=b:204229221 Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Change-Id: Ia17db889829df2668cf2af1b71c6468230de68e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68287 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-26soc/mediatek/mt8186: Allow SCP to access H264 encoderRunyang Chen
Issue: Camera APP is not functional after CB:67434 applied. Root cause and solution: SCP hardware needs to access H264 encoder registers, so we need to remove the DEVAPC protection of H264 encoder for SCP. BUG=b:247743696 TEST=camera APP is functional. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I95946346018bff6a8f2dc02b1ff3e24ad079fc90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67787 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-22soc/mediatek/mt8188: Allow CPUfreq hardware to access MCUPM registersLiju-Clr Chen
This patch fixes AP hanging issue caused by the handshaking between MCUPM and CPUfreq driver. CPUfreq hardware failed to read MCUPM registers due to DEVAPC permission. Therefore, update the DEVAPC settings to fix this issue. BUG=none TEST=CPUfreq in kernel test pass. Change-Id: I6b30b01fc0be052182599709cbcc9139e6d09742 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67724 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I9cf4097518034fa4c3ae1899840ae3a276936f80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67581 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Set PLLs to hardware default valuesGarmin Chang
Some PLLs are not used in firmware, so we should keep them as hardware default values. If their modules want to set them, the corresponding drivers should set them in the kernel stage. BUG=b:233720142 TEST=build pass. Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com> Change-Id: I9bee18005ffed7fc1785c7fd3c0370c8293064ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/67547 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Fix indention in pll.cGarmin.Chang
BUG=b:233720142 TEST=build pass. Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com> Change-Id: I567d1ded1c3b5e36a25026cec697d43d92d5524c Reviewed-on: https://review.coreboot.org/c/coreboot/+/67546 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Change vpp_sel default mux for 4k supportGarmin Chang
vpp_sel and ethdr_sel are vdosys clock source select mux. Steps to change to support 4K source: 1. Change vpp_sel source to mainpll_d6 to run at 416MHz. 2. Change ethdr_sel source to univpll_d6 to run at 416MHz. BUG=b:233720142 TEST=build pass. Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com> Change-Id: I24f133b9b383fd019983cb29a213b47717148e97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67545 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Fix some wrong settings for PLLsGarmin Chang
The observed CPU big core frequency is double compared with the current PLL setting. Therefore fix the wrong setting for PLL register APMIXED_ARMPLL_BL. Moreover, we also fix some wrong settings for other PLLs. TEST=CPU frequency of big core CPU is correct and bootup correctly. BUG=b:244215537 Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com> Change-Id: I9126f439d7a5136b2fb8d66f103ef427a0b08a99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67543 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14timer: Change timer util functions to 64-bitRob Barnes
Since mono_time is now 64-bit, the utility functions interfacing with mono_time should also be 64-bit so precision isn't lost. Fixed build errors related to printing the now int64_t result of stopwatch_duration_[m|u]secs in various places. BUG=b:237082996 BRANCH=All TEST=Boot dewatt Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-09soc/mediatek/mt8186: Enable lastbus debug hardwareot_zhenguo.li
Lastbus is a bus debug tool. When the bus hangs, the bus transmission information before resetting will be recorded. The watchdog cannot clear it and it will be printed out for bus hanging analysis. TEST=build pass. BUG=none Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com> Change-Id: Iff39486dfad556a3104b2f2b6811c34c2ded6954 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-09soc/mediatek/mt8186: Enable the protection of DEVAPCRunyang Chen
Enable the protection for DEVAPC registers of AO domain. TEST=build pass. BUG=b:244250435 Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I8535438d4c7da29c9dcd97be9a2af05ea4690064 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67434 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-09soc/mediatek/mt8186: Complete DEVAPC settingsRunyang Chen
In the previous patch (CB:60317), only basic settings were added. Now complete DEVPAC settings on MT8186. 1. Update permission setting 2. Update master domain setting: - domain 4: SCP - domain 5: SPM 3. Set domain remap - MMSYS (4-bit to 2-bit) TEST=test on kernel correctly. BUG=b:204229221 Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I40a9b115fb21b6b955fde358241f4483b85e3db3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67433 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-09soc/mediatek/mt8186: Enable CPU power hardware tracking for PMIC MT6366Sen Chu
1. There are two power sources for CPU: - Logic power (VPROC). - SRAM power (VSRAM_PROC). 2. There is a constraint between VPROC and VSRAM_PROC: - 0mV <= VSRAM_PROC - VPROC <= 250mV. With software control, the constraint might not always hold. Therefore, we enable hardware tracking from PMIC MT6366 to ensure the constraint is met automatically. BUG=b:236353282, b:241615706 TEST=meet the constrain correctly when adjusting the voltage. Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Change-Id: I6012c57e60c009f1d599b57aab1c2526ee789208 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67436 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-08src: De-conflict CALIBRATION_REGION definitionsMartin Roth
Change the name of the CALIBRATION_REGION definitions used in two separate locations. This conflict was causing an error for the lint-001-no-global-config-in-romstage test. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: If6734f2a7d9be669586ea350fb9979fcd422b591 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-08soc/mediatek/mt8188: Enable ARM Trusted Firmware integrationRex-BC Chen
Enable configuration to build with MT8186 arm-trusted-firmware drivers. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id16405c84f6e0a2e21f95cc45babf85bd980b43e Reviewed-on: https://review.coreboot.org/c/coreboot/+/67356 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07mb/google/geralt: Pass reset gpio parameter to BL31Bo-Chen Chen
Pass the reset gpio parameter to BL31 to support SoC reset. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ifdfbd6bd82f64b084f6349cb617443053c89a3f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67357 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07soc/mediatek: a common implementation to register BL31 resetHung-Te Lin
The implementations of register_reset_to_bl31() are the same for MedaiTek platforms, so we extract them to soc/common/bl31.c. BUG=None TEST=build pass Change-Id: I297ea2e18a6d7e92236cf415844b166523616bdf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-07soc/mediatek/mt8188: Enable mfgpll properly and fix SPMI muxesJohnson Wang
Some of the pll settings are incorrect, which cause problems in GPU after booting into kernel. - MFGPLL opp_ck_en bit isn't located at MFGPLL_CON1, so we need to fix it to enable MFGPLL properly. - Switch SPMI clock muxes to 260M to avoid kernel hang while probing SPMI kernel driver. TEST=GPU bringup correctly. BUG=b:233720142 Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Change-Id: I971109a5f72e3307899daaf5a5f26022124b559b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67355 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2022-08-31soc/mediatek/mt8188: Add SPM loader and initialize SPM in RAM stageRex-BC Chen
Add support for loading SPM firmware from CBFS to SPM SRAM. SPM needs its own firmware to enable SPM suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. SPM is an essential component on MediaTek SoC, so we initialize PPM in soc_init(). For MT8188, SPM will handshake with DPM to do initialization, so we need to call spm_init() after dpm_init(). This SPM flow adds 33ms to the boot time. firmware log: mtk_init_mcu: Loaded (and reset) spm_firmware.bin in 25 msecs SPM: spm_init done in 33 msecs, spm pc = 0x400 TEST=spm pc is 0x400 which is in idle state. BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I1a1f49383e0ceadc259a18272fc1c277b65406ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/66973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move some SPM functions to commonBo-Chen Chen
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and MT8188, so we move them to common/spm.c. TEST=build pass. BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek/mt8188: Use MHz as unit for current_clkBo-Chen Chen
The unit of current_clk in pmif_ulposc_check() should be MHz. We use pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz. Without this modification, the judgement in pmif_ulposc_check() is alway wrong due to the wrong unit. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek/mt8188: Add DEVAPC basic driverNina Wu
Add basic DEVAPC (device access permission control) driver. DEVAPC driver is used to set up bus fabric security and data protection among hardwares. DEVAPC driver groups the master hardwares into different domains and gives secure and non-secure property. The slave hardware can configure different access permissions for different domains via DEVAPC driver. 1. Initialize DEVAPC. 2. Set master domain and secure side band. 3. Set default permission. TEST=check logs of DEVAPC ok. BUG=b:236331724 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Change-Id: Iad3569bc6f8ba032d478934ba839dc4b5387bafc Reviewed-on: https://review.coreboot.org/c/coreboot/+/66970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move common DEVPAC enums and functions to commonBo-Chen Chen
Some enums and functions are the same in DEVAPC driver for MT8195, MT8186, and MT8188, so we move them to common folder. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek/mt8188: Initialize DPM in ramstageXi Chen
Add initialization of DPM drvier for DRAM low power mode. DPM is an essential component on MediaTek SoC, so we initialize DPM in soc_init(). This DPM flow adds 22ms to the boot time. coreboot logs: CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110 mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes) CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140 mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes) TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-31soc/mediatek/mt8188: Support 4 channel DRAM in DPM init flowXi Chen
TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: Ia68aca1d1e8729739246157904727123e5d001e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66968 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-31soc/mediatek/mt8188: Add DPM firmware filesXi Chen
DPM is a hardware module for DRAM power management, which is used for DRAM low power mode. TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I872396fe2c5accd92ba5c14b124125bd58257771 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66967 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-31soc/mediatek: Move dpm_4ch.c to commonXi Chen
MT8195 and MT8188 share the same dpm_4ch.c, so we move it to common folder. TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I13406707d3b331ced57af62f4ba4f365e9ac4f84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66966 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-27soc/mediatek/mt8188: Enable USE_CBMEM_DRAM_INFOXi Chen
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8188. Therefore, we select this configuration to enable it. TEST=build pass BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I14f3d971fe861cbd09cc86c8a5a1fb531bfe78d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66280 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-27soc/mediatek: Move emi.c to common folderRex-BC Chen
The emi.c is the same for MT8186 and MT8188, so we could move it to the common folder and reuse it. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I225f1d07c973129172f01bf7f4d7f5d5abe7c02b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66328 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-27soc/mediatek/mt8188: Add DRAM fast calibration supportXi Chen
Define fields of sdram_params and enable MEDIATEK_BLOB_FAST_INIT to run fast calibration for MT8188 using blob. DRAM fast calibration logs: DRAM-K: Fast calibration passed in 19530 msecs dram size (romstage): 0x200000000 TEST=Fast calibration pass. BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I2468d971fe861cbd09cc86c8a5a1fb531bfe78d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-27soc/mediatek/mt8188: Add DRAM full calibration supportXi Chen
- Use common SoC drivers for DRAM calibration support. - Remove emi.h because sdram_size() is already declared in common/include/soc/emi.h. - Add dramc_param.h and dramc_soc.h to prepare for implementation of DRAM full calibration. TEST=build pass BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I2f88d971fe861cbd09cc86c8a5a1fb531bfe78d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-18soc/mediatek/mt8186: spm: Remove redundant callYidi Lin
spm_set_power_control() is already called in spm_init(). It is not necessary to call spm_set_power_control() again in the mtk_mcu reset callback. TEST=check SPM PC value (0x250) after SPM is loaded. [INFO ] SPM: spm_init done in 54 msecs, spm pc = 0x250 Signed-off-by: Yidi Lin <yidilin@chromium.org> Change-Id: I7ee517e1eb6485c52155a69d05781a61ddfe4cad Reviewed-on: https://review.coreboot.org/c/coreboot/+/66785 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13soc/mediatek/mt8188: Initialize DFDRex-BC Chen
DFD (Design for Debug) is a debugging tool, which scans flip-flops and dumps to internal RAM on the WDT reset. After system reboots, those values can be shown for debugging using MTK internal parsing tools. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I6d19dc6f4e47ed69ba2ea87c79984020a413aee9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66586 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13soc/mediatek: Move common definition of DFD to common folderRex-BC Chen
We use the same dump address and size for DFD in all MediaTek SoCs, so we move them to dfd_common.h and rename dfd_common.h to dfd.h. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I162bbb0a82e3b55c8cfbbd20e28a54ad01fd6b0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66585 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13soc/mediatek/mt8188: Fix the order of register address in addressmap.hRex-BC Chen
TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ie9d7b361dda8c5850bc0682c255bc20f9e26675c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66668 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13soc/mediatek/mt8188: Add tracker dumpRex-BC Chen
Tracker is a debugging tool. When bus timeout occurs, the system will reboot and latch some values of tracker registers which could be used for debugging. This function will be triggered only when it encounters the bus hanging issue. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I78f676c08ea44e9bb10bd99bbfed70e3e8ece993 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66584 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-13soc/mediatek/mt8188: replace SPDX identifiers to GPL-2.0-only OR MITMacpaul Lin
This replaces 'SPDX-License-Identifier' tags in all the files under soc/mediatek/mt8188 for better code re-use in other open source software stack. These files were originally from MediaTek and follow coreboot's main license: "GPL-2.0-only". Now MediaTek replaces these files to "GPL-2.0-only OR MIT" license. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Change-Id: If61e8b252400e8e5ecd185b6806b1ca279065f15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66628 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2022-08-12soc/mediatek/mt8186: Enable USB macro controlAllen-KH Cheng
When powering down SSUSB, the system needs to wait the ACK from SSUSB. We found that the setting of USB PAD top macro is not correct and it will cause timeout waiting for the ACK from SSUSB. To resolve this, we add mt_pll_set_usb_clock() in pll.c to enable usb macro control for powering down SSUSB. TEST=timeout of ssusb powerdown ack does not occur. BUG=b:239634625 Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.corp-partner.google.com> Change-Id: I58ba86e0467284e9947bfda1005c151a3e0c8881 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66600 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-03soc/mediatek: Move common definitions to dramc_soc_common.hRex-BC Chen
Some definitions are the same in dramc_soc.h for MT8192, MT8195 and MT8186, so we move them to dramc_soc_common.h TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3095333e62abf98de1f2d27033baeeba7a4cad79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66276 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add SPI supportLiya Li
The gpios and the tick delay register are different between MT8188 and previous MediaTek SoCs, so we need to add this patch to support SPI. TEST=build pass BUG=b:236331724 Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com> Change-Id: I6065b9d285dfd36c191f274f500fdb694920276e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66185 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Create GET_TICK_DLY_REG macro for SPI tick delay settingRex-BC Chen
MT8188 SPI tick delay setting is moved to `spi_cmd_reg` register which is different from previous SoCs, so we define a macro to get the designated register. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia30e94a8688c0e1c1d4b3d15206f28e5bd8c9bd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66184 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add clk_buf support in romstageSong Fan
TEST=build pass. BUG=b:233720142 Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com> Change-Id: Ic300b70a38ac204b098ca9ab15cf7045b66fd76d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66182 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add RTC supportSong Fan
Add RTC header file for SoC-specific settings. Add RTC support in romstage. TEST=build pass. BUG=b:233720142 Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com> Change-Id: I38115ce0c9a4e1c1b2b7c8e6d40f47e99f7f86b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66181 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Move common definitions from rtc.h to rtc_reg_common.hRex-BC Chen
Move the common definitions to rtc_reg_common.h, so we can reuse those definitions on MT8188. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia1d916a88b7cb875b35ee5813b7b52d9e98f5009 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66180 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add AUXADC supportHui Liu
TEST=get voltage as 340mV for channel 0 in MTK EVB. BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: Idd1edcce6cb62fcf6991bb9342c409150989c5ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/66121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-29soc/mediatek: Move struct mtk_auxadc_regs to auxadc_common.hRex-BC Chen
The AUXADC register definitions are the same for all MediaTek SoCs, so we move struct mtk_auxadc_regs to auxadc_common.h. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I48978a93137a7de42f8ea2873be3130cb8f534f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-27soc/mediatek/mt8195: Skip PCIe ops for eMMC SKUsYu-Ping Wu
To avoid unnecessary PCIe early initialization for non-NVMe devices (which would take about 150ms on dojo), skip setting PCIe ops when initializing mt8195 SoC. BUG=b:238850212 TEST=emerge-cherry coreboot TEST=Dojo SKU1 (eMMC) boot time <= 1s BRANCH=cherry Change-Id: I8945890ba422c0c4eb42683935220b7afbb80dfd Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-07-27mb/google/cherry: Introduce mainboard_needs_pcie_initYu-Ping Wu
Implement mainboard_needs_pcie_init() for cherry as a callback for mt8195 SoC to determine whether to initialize PCIe. When the SKU id is unknown or unprovisioned (for example at the beginning of the factory flow), we should still initialize PCIe. Otherwise the devices with NVMe will fail to boot. BUG=b:238850212 TEST=emerge-cherry coreboot BRANCH=cherry Change-Id: I2ed0ceeb37d2924ca16485fb2d130959a7eff102 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-07-26soc/mediatek/mt8188: Initialize SSPMRex-BC Chen
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. It takes 21 ms to load sspm.bin. coreboot logs: CBFS: Found 'sspm.bin' @0x21680 size 0xa815 in mcache @0xffffeac4 mtk_init_mcu: Loaded (and reset) sspm.bin in 21 msecs (137348 bytes) TEST=we can see the sspm logs. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ib6443b64734048c1d71eeac650f36d7c4ac709cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/66067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-26soc/mediatek/mt8188: Initialize MCUPMRex-BC Chen
Load MCUPM firmware and boot up MCUPM in ramstage. It takes 41 ms to load mcupm.bin. coreboot logs: CBFS: Found 'mcupm.bin' @0x12580 size 0xf0c6 in mcache @0xffffead0 mtk_init_mcu: Loaded (and reset) mcupm.bin in 41 msecs (122184 bytes) TEST=we can see the mcupm logs after reset releases. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id1e62d9d6ede1c453e03eeda0d9b16fafa9e2372 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-22soc/mediatek/mt8188: Add eMMC and SD card configurationsAndy-ld Lu
Geralt reference design has both eMMC and SD card interfaces, so we have to configure both in ramstage. Implement msdc.c (mass storage device class) to place the eMMC and SD card drivers. This implementation is based on chapter 5.9 in MT8188 Functional Specification. TEST=boot to kernel using emmc successfully. BUG=b:236331724 Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com> Change-Id: I6594c8466a133d3fdb0084716acca8dcf785f94f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65975 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22mb/google/geralt: Implement regulator interfaceHui Liu
Control regulator more easily with regulator interface. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I9727475774b3b9a8dcd49e5e60e133f9d745b407 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65875 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google: Use boolean type for "enable" argument for regulatorRex-BC Chen
Because 0 and 1 are the only possible values, 1. Change input argument "enable" of mainboard_enable_regulator to bool. 2. Change return value of mainboard_regulator_is_enabled() to bool. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iae09c5fedf8f7394bfbb677e5aee37ed061304fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65997 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google: Replace some strings in regulator.cRex-BC Chen
From comments of CB:65875, we replace *_vol to *_voltage. s/mainboard_set_regulator_vol/mainboard_set_regulator_voltage/ s/mainboard_get_regulator_vol/mainboard_get_regulator_voltage/ TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iadf0408e8914d6e32915464f93979978c4634eaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21soc/mediatek/mt8188: Add VMCH, VMC support for MT8188Hui Liu
For MT8188, we need to enable and adjust VMCH and VMC to support SD cards. Therefore, we add VPA and VSIM1 voltage adjustment APIs. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I03938f9ef17a0bdd615bcbbfc7b59fa5acb8fbfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/65874 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21soc/mediatek/mt8188: Add PMIF and PMIC init supportHui Liu
Add PMIF, SPI, SPMI and PMIC init code. These PMIC settings are used by MediaTek internally. We can find these registers in "MT6365_PMIC_Data_Sheet_V1.4.pdf" and "MT6315 datasheet v1.3.pdf". The setting values are provided by MeidaTek designers. TEST=build pass BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I05a51894b130a59c28d957b64d6401c8bb9cee91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21soc/mediatek: Create a function to check ulposcRex-BC Chen
We will use the same drivers for checking ulposc in MT8188, so we add a new function pmif_ulposc_check() to common. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I40136eaeb2c08a97cd65bfb8a81f2f24739d4d51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65841 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-13soc/mediatek: Move SPMI device table to SoC folderHui Liu
The SPMI devices on MT8188 are different from previous SoCs, so we move them to SoC folder. We also move SoC-specific definitions to soc/pmif.h. TEST=build pass BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I666c2a8222a2bd8cd460e2225a7ae48b001da9d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65757 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-13soc/mediatek/mt8188: add usb host supportShaocheng Wang
Add usb host function support. TEST=read usb data successfully. BUG=b:236331724 Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com> Change-Id: I3494b687b811466cb6b988164d3c5b6fecc3016a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65754 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-13soc/mediatek/mt8188: Enable mmu operation for L2C SRAM and DMARex-BC Chen
- Turn off L2C SRAM and reconfigure as L2 cache: Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready. After DRAM is ready, we should invoke disable_l2c_sram to reconfigure the L2C SRAM as L2 cache. - Configure DMA buffer in DRAM: Set DRAM DMA to be non-cacheable to load blob correctly. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I10f1cb8c62dfa78f59a4a5ea6087609668a0c2aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/65753 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-13soc/mediatek/mt8188: Add video/audio mtcmos settingRex-BC Chen
Add power domain data for video and audio. TEST=build pass BUG=b:233720142 Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com> Change-Id: Ic5fd496cbc6904b42eae28a62bf00a71f0ef508d Reviewed-on: https://review.coreboot.org/c/coreboot/+/65752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-13soc/mediatek/mt8188: Add PLL and clock init supportgarmin chang
Add PLL and clock init code, frequency meter and APIs for raising little CPU/CCI frequency. For usb clock setting, we also implement mt_pll_usb_clock_setting() to enable usb clock for all ports. TEST=build pass BUG=b:233720142 Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com> Change-Id: I03cb5a4c6fa5ddad7da6f955d0c6d0b3395503e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-12soc/mediatek: Add mt_pll_set_usb_clock() to enable usb clockRex-BC Chen
There are clock settings for usb in mt8195 and mt8188, so we add a new function which is implemented in pll.c to do this. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I40b358b197541bc5281645879553340059829db3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65750 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-12soc/mediatek/mt8188: Add I2C driver supportkewei.xu
Add I2C controller drivers. TEST=build pass BUG=b:233720142 Signed-off-by: kewei.xu <kewei.xu@mediatek.corp-partner.google.com> Change-Id: I7d19df3571e5588c7b20d9c7f26fa177b2221851 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-07soc/mediatek/mt8188: Add NOR-Flash supportRex-BC Chen
Add NOR-Flash drivers for flash read/write. TEST=read nor flash data successfully. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I4e84fc023111b86f7f4984020d24811e3361ba03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65621 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek: Move FLASH_DUAL_READ to commonRex-BC Chen
FLASH_DUAL_READ is a common configuration for all MediaTek SoCs, so we move it to common folder and select it in SoCs' Kconfig. As suggested in CB:58837, we also rename FLASH_DUAL_READ to FLASH_DUAL_IO_READ to reduce confusion. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: If267a332519412a7919c5b7817047fabe4a564c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65620 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-06soc/mediatek/mt8188: Add GPIO driversGuodong Liu
Add GPIO drivers to let other module control GPIOs. TEST=build pass BUG=b:233720142 Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I0a2a5178949e9ad3e033ac332e0f1e8565e39b3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/65619 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek: Move some gpio functions to common/gpio_op.cRex-BC Chen
gpio_set_pull(), gpio_set_pull_pu_pd() and gpio_set_spec_pull_pupd() can be reused for mt8192, mt8195 and mt8186, so move it to new file "gpio_op.c" in common folder. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I81ab9b01ee20fccf3ef29c5902597b5045d3e36a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65641 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek/mt8188: Add timer supportBo-Chen Chen
Add timer drivers to Makefile. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I0e3e58c7118a18e738a5abba391db0be9cfd7bf9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65588 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek: Make timer_prepare() a common functionRex-BC Chen
timer_prepare() is the same for MT8195 and MT8186, so move it to common folder. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I91a6f4ecc665a058cb7a0ba96c15b27d6dc97d13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65602 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek/mt8188: Initialize watchdogBo-Chen Chen
Add watchdog support for MT8188. This implementation is based on chapter 3.10.10 in MT8188 Functional Specification. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iaf56c78d89af53d0272583b463c050e69bbeb07a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65587 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-06soc/mediatek: Move wdt_set_req() to common folderBo-Chen Chen
There are more and more variables which are SoC-specific, so add soc/wdt.h for each SoC and rename common/wdt.h to common/wdt_common.h. wdt_set_req() is almost the same for mt8192, mt8195 and mt8186, so move it to a common file wdt_req.c. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I7a334b3e7cd4f24a848dd31aca546dc7236d5fb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65636 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-04soc/mediatek/mt8188: Add a stub implementation of the MT8188 SoCRex-BC Chen
Add new folder and basic drivers for Mediatek SoC 'MT8188'. Difference of modules including in this patch between MT8188 and existing SoCs: Timer: Similar to MT8195 and MT8186, MT8188 uses v2 timer. EMI/PLL/SPI: Different from existing SoCs. The implementation is based on these files: MT8188G_Application Processor Technical Brief_v0.4.pdf MT8188G_Functional Specification v0.4.pdf MT8188 Application Processor Registers-1.pdf MT8188 Application Processor Registers-2.pdf TEST=saw the coreboot uart log to bootblock BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3320f3d49a9b9ed781ceb812e4341e379db4ac20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65585 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@chromium.org>
2022-06-26soc/mediatek: Do resource transitionKyösti Mälkki
Change-Id: I668a39c603870329fd1528ddc5f3a42a379e1e76 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65267 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-24src/soc: Get rid of most src/soc/Kconfig filesMartin Roth
Most of the src/soc/Kconfig files are only there for AMD and Intel to load the main SoC Kconfig files before any common files. That can be done in src/Kconfig instead. Moving the loads to the lower level allows the removal of all but the Intel soc/Kconfig file, which can be removed in a follow-on patch. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5061191fe23e0b7c745e90874bd7b390806bbcfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/65327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-06-24soc/mediatek: Clean up Makefile.inc for mt8186, mt8192 and mt8195Yidi Lin
Clean up Makefile.inc by sorting entries and moving common entries to all-y. In this way it is more clear to know what drivers have been involved in each stage and the hardware differences between each SoC. BUG=none TEST=emerge-corsola coreboot TEST=emerge-asurada coreboot TEST=emerge-cherry coreboot Change-Id: Idfc7de36ebf36650f7c6bd1584ef77e2a540cde9 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65315 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-22device/resource: Add _kb postfix for resource allocatorsKyösti Mälkki
There is a lot of going back-and-forth with the KiB arguments, start the work to migrate away from this. Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-12soc/mediatek: pass access mode to the payloadWenbin Mei
Some eMMCs (for example, Kingston-EMMC64G-TX29-HP) may enter the ready state by sending CMD1 twice. If it is in the ready state, then the payload (for example, depthcharge) will not send CMD1, but the access mode is only available from the response of CMD1. Therefore, we need to pass the access mode to the payload by defining the following types: - MMC_STATUS_CMD1_READY: in ready state and access mode is byte mode. - MMC_STATUS_CMD1_READY_HCS: in ready state and access mode is sector mode. BUG=b:234672726 BRANCH=cherry TEST=boot ok Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: Iad905781d8ba0105911cf87a6b845cd8df57521e Reviewed-on: https://review.coreboot.org/c/coreboot/+/65054 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-06-07Replace some ENV_ROMSTAGE with ENV_RAMINITKyösti Mälkki
With a combined bootblock+romstage ENV_ROMSTAGE might no longer evaluate true. Change-Id: I733cf4e4ab177e35cd260318556ece1e73d082dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63376 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-06-03soc/mediatek: Rename mtk_wdt_preinit() to mtk_wdt_set_req()Rex-BC Chen
To simplify the calling sequence for mtk_wdt_preinit() and we always adjust request setting in mtk_wdt_preinit(), we rename mtk_wdt_preinit() to mtk_wdt_set_req() and call it in mtk_wdt_init(). From this modification, we can also enable thermal hardware reset feature (CB:64676, CB:64675) in MT8192 and MT8195. BUG=none TEST=build pass Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I1904ff9387f7677a077068f2c3df923bd642ea3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-06-01soc/mediatek/mt8186/pll.c: Fix typo in log messageElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ied8eb0fb51d0521eedd8ff77b1083813d3843570 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-05-28soc/mediatek/mt8192: Enable thermal hardware resetRex-BC Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8192 Function Specification. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I98b062c2070384527624c3bcf0dfded25a2c8ce4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64676 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28soc/mediatek/mt8195: Enable thermal hardware resetRex-BC Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8195 Function Specification. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia6489bb953d148a43af173454d6f2b3e2a1dfcf9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64675 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28soc/mediatek/mt8186: Enable thermal hardware resetRunyang Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8186 Function Specification. BUG=none TEST=emerge-corsola coreboot TEST=thermal hardware reset is working. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: Id2ed55e6d4f4eec450bf7c849f726a389eeb6694 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64659 Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-25soc/mediatek/mt8195: Configure SCP core 2 domain settingTinghan Shen
SCP core 2 is enabled for MT8195 camera feature. It requires the same register access permission as SCP core 1. Therefore, we configure the same domain ID for both cores. BRANCH=cherry BUG=b:193814857 TEST=cherry boot ok Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Change-Id: Idf335593936b12c083c926a252fa99c3b76cda6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/64575 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-20CBMEM: Change declarations for initialization hooksKyösti Mälkki
There are efforts to have bootflows that do not follow a traditional bootblock-romstage-postcar-ramstage model. As part of that CBMEM initialisation hooks will need to move from romstage to bootblock. The interface towards platforms and drivers will change to use one of CBMEM_CREATION_HOOK() or CBMEM_READY_HOOK(). Former will only be called in the first stage with CBMEM available. Change-Id: Ie24bf4e818ca69f539196c3a814f3c52d4103d7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-05-20soc/mediatek: Fill coreboot table with PCIe infoJianjun Wang
In order to pass PCIe base address to payloads, implement pcie_fill_lb() to fill coreboot table with PCIe info. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib2988694f60aac9cbfc09ef9a26d47e01c004406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 23:31:04 +0000