summaryrefslogtreecommitdiff
path: root/src/soc/mediatek
AgeCommit message (Collapse)Author
2022-07-29soc/mediatek/mt8188: Add clk_buf support in romstageSong Fan
TEST=build pass. BUG=b:233720142 Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com> Change-Id: Ic300b70a38ac204b098ca9ab15cf7045b66fd76d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66182 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add RTC supportSong Fan
Add RTC header file for SoC-specific settings. Add RTC support in romstage. TEST=build pass. BUG=b:233720142 Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com> Change-Id: I38115ce0c9a4e1c1b2b7c8e6d40f47e99f7f86b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66181 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Move common definitions from rtc.h to rtc_reg_common.hRex-BC Chen
Move the common definitions to rtc_reg_common.h, so we can reuse those definitions on MT8188. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia1d916a88b7cb875b35ee5813b7b52d9e98f5009 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66180 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add AUXADC supportHui Liu
TEST=get voltage as 340mV for channel 0 in MTK EVB. BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: Idd1edcce6cb62fcf6991bb9342c409150989c5ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/66121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-29soc/mediatek: Move struct mtk_auxadc_regs to auxadc_common.hRex-BC Chen
The AUXADC register definitions are the same for all MediaTek SoCs, so we move struct mtk_auxadc_regs to auxadc_common.h. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I48978a93137a7de42f8ea2873be3130cb8f534f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-27soc/mediatek/mt8195: Skip PCIe ops for eMMC SKUsYu-Ping Wu
To avoid unnecessary PCIe early initialization for non-NVMe devices (which would take about 150ms on dojo), skip setting PCIe ops when initializing mt8195 SoC. BUG=b:238850212 TEST=emerge-cherry coreboot TEST=Dojo SKU1 (eMMC) boot time <= 1s BRANCH=cherry Change-Id: I8945890ba422c0c4eb42683935220b7afbb80dfd Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-07-27mb/google/cherry: Introduce mainboard_needs_pcie_initYu-Ping Wu
Implement mainboard_needs_pcie_init() for cherry as a callback for mt8195 SoC to determine whether to initialize PCIe. When the SKU id is unknown or unprovisioned (for example at the beginning of the factory flow), we should still initialize PCIe. Otherwise the devices with NVMe will fail to boot. BUG=b:238850212 TEST=emerge-cherry coreboot BRANCH=cherry Change-Id: I2ed0ceeb37d2924ca16485fb2d130959a7eff102 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-07-26soc/mediatek/mt8188: Initialize SSPMRex-BC Chen
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. It takes 21 ms to load sspm.bin. coreboot logs: CBFS: Found 'sspm.bin' @0x21680 size 0xa815 in mcache @0xffffeac4 mtk_init_mcu: Loaded (and reset) sspm.bin in 21 msecs (137348 bytes) TEST=we can see the sspm logs. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ib6443b64734048c1d71eeac650f36d7c4ac709cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/66067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-26soc/mediatek/mt8188: Initialize MCUPMRex-BC Chen
Load MCUPM firmware and boot up MCUPM in ramstage. It takes 41 ms to load mcupm.bin. coreboot logs: CBFS: Found 'mcupm.bin' @0x12580 size 0xf0c6 in mcache @0xffffead0 mtk_init_mcu: Loaded (and reset) mcupm.bin in 41 msecs (122184 bytes) TEST=we can see the mcupm logs after reset releases. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id1e62d9d6ede1c453e03eeda0d9b16fafa9e2372 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-22soc/mediatek/mt8188: Add eMMC and SD card configurationsAndy-ld Lu
Geralt reference design has both eMMC and SD card interfaces, so we have to configure both in ramstage. Implement msdc.c (mass storage device class) to place the eMMC and SD card drivers. This implementation is based on chapter 5.9 in MT8188 Functional Specification. TEST=boot to kernel using emmc successfully. BUG=b:236331724 Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com> Change-Id: I6594c8466a133d3fdb0084716acca8dcf785f94f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65975 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22mb/google/geralt: Implement regulator interfaceHui Liu
Control regulator more easily with regulator interface. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I9727475774b3b9a8dcd49e5e60e133f9d745b407 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65875 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google: Use boolean type for "enable" argument for regulatorRex-BC Chen
Because 0 and 1 are the only possible values, 1. Change input argument "enable" of mainboard_enable_regulator to bool. 2. Change return value of mainboard_regulator_is_enabled() to bool. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iae09c5fedf8f7394bfbb677e5aee37ed061304fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65997 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google: Replace some strings in regulator.cRex-BC Chen
From comments of CB:65875, we replace *_vol to *_voltage. s/mainboard_set_regulator_vol/mainboard_set_regulator_voltage/ s/mainboard_get_regulator_vol/mainboard_get_regulator_voltage/ TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iadf0408e8914d6e32915464f93979978c4634eaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21soc/mediatek/mt8188: Add VMCH, VMC support for MT8188Hui Liu
For MT8188, we need to enable and adjust VMCH and VMC to support SD cards. Therefore, we add VPA and VSIM1 voltage adjustment APIs. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I03938f9ef17a0bdd615bcbbfc7b59fa5acb8fbfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/65874 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21soc/mediatek/mt8188: Add PMIF and PMIC init supportHui Liu
Add PMIF, SPI, SPMI and PMIC init code. These PMIC settings are used by MediaTek internally. We can find these registers in "MT6365_PMIC_Data_Sheet_V1.4.pdf" and "MT6315 datasheet v1.3.pdf". The setting values are provided by MeidaTek designers. TEST=build pass BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I05a51894b130a59c28d957b64d6401c8bb9cee91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21soc/mediatek: Create a function to check ulposcRex-BC Chen
We will use the same drivers for checking ulposc in MT8188, so we add a new function pmif_ulposc_check() to common. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I40136eaeb2c08a97cd65bfb8a81f2f24739d4d51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65841 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-13soc/mediatek: Move SPMI device table to SoC folderHui Liu
The SPMI devices on MT8188 are different from previous SoCs, so we move them to SoC folder. We also move SoC-specific definitions to soc/pmif.h. TEST=build pass BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I666c2a8222a2bd8cd460e2225a7ae48b001da9d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65757 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-13soc/mediatek/mt8188: add usb host supportShaocheng Wang
Add usb host function support. TEST=read usb data successfully. BUG=b:236331724 Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com> Change-Id: I3494b687b811466cb6b988164d3c5b6fecc3016a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65754 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-13soc/mediatek/mt8188: Enable mmu operation for L2C SRAM and DMARex-BC Chen
- Turn off L2C SRAM and reconfigure as L2 cache: Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready. After DRAM is ready, we should invoke disable_l2c_sram to reconfigure the L2C SRAM as L2 cache. - Configure DMA buffer in DRAM: Set DRAM DMA to be non-cacheable to load blob correctly. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I10f1cb8c62dfa78f59a4a5ea6087609668a0c2aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/65753 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-13soc/mediatek/mt8188: Add video/audio mtcmos settingRex-BC Chen
Add power domain data for video and audio. TEST=build pass BUG=b:233720142 Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com> Change-Id: Ic5fd496cbc6904b42eae28a62bf00a71f0ef508d Reviewed-on: https://review.coreboot.org/c/coreboot/+/65752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-13soc/mediatek/mt8188: Add PLL and clock init supportgarmin chang
Add PLL and clock init code, frequency meter and APIs for raising little CPU/CCI frequency. For usb clock setting, we also implement mt_pll_usb_clock_setting() to enable usb clock for all ports. TEST=build pass BUG=b:233720142 Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com> Change-Id: I03cb5a4c6fa5ddad7da6f955d0c6d0b3395503e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-12soc/mediatek: Add mt_pll_set_usb_clock() to enable usb clockRex-BC Chen
There are clock settings for usb in mt8195 and mt8188, so we add a new function which is implemented in pll.c to do this. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I40b358b197541bc5281645879553340059829db3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65750 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-12soc/mediatek/mt8188: Add I2C driver supportkewei.xu
Add I2C controller drivers. TEST=build pass BUG=b:233720142 Signed-off-by: kewei.xu <kewei.xu@mediatek.corp-partner.google.com> Change-Id: I7d19df3571e5588c7b20d9c7f26fa177b2221851 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-07soc/mediatek/mt8188: Add NOR-Flash supportRex-BC Chen
Add NOR-Flash drivers for flash read/write. TEST=read nor flash data successfully. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I4e84fc023111b86f7f4984020d24811e3361ba03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65621 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek: Move FLASH_DUAL_READ to commonRex-BC Chen
FLASH_DUAL_READ is a common configuration for all MediaTek SoCs, so we move it to common folder and select it in SoCs' Kconfig. As suggested in CB:58837, we also rename FLASH_DUAL_READ to FLASH_DUAL_IO_READ to reduce confusion. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: If267a332519412a7919c5b7817047fabe4a564c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65620 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-06soc/mediatek/mt8188: Add GPIO driversGuodong Liu
Add GPIO drivers to let other module control GPIOs. TEST=build pass BUG=b:233720142 Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I0a2a5178949e9ad3e033ac332e0f1e8565e39b3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/65619 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek: Move some gpio functions to common/gpio_op.cRex-BC Chen
gpio_set_pull(), gpio_set_pull_pu_pd() and gpio_set_spec_pull_pupd() can be reused for mt8192, mt8195 and mt8186, so move it to new file "gpio_op.c" in common folder. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I81ab9b01ee20fccf3ef29c5902597b5045d3e36a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65641 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek/mt8188: Add timer supportBo-Chen Chen
Add timer drivers to Makefile. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I0e3e58c7118a18e738a5abba391db0be9cfd7bf9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65588 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek: Make timer_prepare() a common functionRex-BC Chen
timer_prepare() is the same for MT8195 and MT8186, so move it to common folder. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I91a6f4ecc665a058cb7a0ba96c15b27d6dc97d13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65602 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek/mt8188: Initialize watchdogBo-Chen Chen
Add watchdog support for MT8188. This implementation is based on chapter 3.10.10 in MT8188 Functional Specification. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iaf56c78d89af53d0272583b463c050e69bbeb07a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65587 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-06soc/mediatek: Move wdt_set_req() to common folderBo-Chen Chen
There are more and more variables which are SoC-specific, so add soc/wdt.h for each SoC and rename common/wdt.h to common/wdt_common.h. wdt_set_req() is almost the same for mt8192, mt8195 and mt8186, so move it to a common file wdt_req.c. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I7a334b3e7cd4f24a848dd31aca546dc7236d5fb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65636 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-04soc/mediatek/mt8188: Add a stub implementation of the MT8188 SoCRex-BC Chen
Add new folder and basic drivers for Mediatek SoC 'MT8188'. Difference of modules including in this patch between MT8188 and existing SoCs: Timer: Similar to MT8195 and MT8186, MT8188 uses v2 timer. EMI/PLL/SPI: Different from existing SoCs. The implementation is based on these files: MT8188G_Application Processor Technical Brief_v0.4.pdf MT8188G_Functional Specification v0.4.pdf MT8188 Application Processor Registers-1.pdf MT8188 Application Processor Registers-2.pdf TEST=saw the coreboot uart log to bootblock BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3320f3d49a9b9ed781ceb812e4341e379db4ac20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65585 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@chromium.org>
2022-06-26soc/mediatek: Do resource transitionKyösti Mälkki
Change-Id: I668a39c603870329fd1528ddc5f3a42a379e1e76 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65267 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-24src/soc: Get rid of most src/soc/Kconfig filesMartin Roth
Most of the src/soc/Kconfig files are only there for AMD and Intel to load the main SoC Kconfig files before any common files. That can be done in src/Kconfig instead. Moving the loads to the lower level allows the removal of all but the Intel soc/Kconfig file, which can be removed in a follow-on patch. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5061191fe23e0b7c745e90874bd7b390806bbcfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/65327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-06-24soc/mediatek: Clean up Makefile.inc for mt8186, mt8192 and mt8195Yidi Lin
Clean up Makefile.inc by sorting entries and moving common entries to all-y. In this way it is more clear to know what drivers have been involved in each stage and the hardware differences between each SoC. BUG=none TEST=emerge-corsola coreboot TEST=emerge-asurada coreboot TEST=emerge-cherry coreboot Change-Id: Idfc7de36ebf36650f7c6bd1584ef77e2a540cde9 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65315 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-22device/resource: Add _kb postfix for resource allocatorsKyösti Mälkki
There is a lot of going back-and-forth with the KiB arguments, start the work to migrate away from this. Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-12soc/mediatek: pass access mode to the payloadWenbin Mei
Some eMMCs (for example, Kingston-EMMC64G-TX29-HP) may enter the ready state by sending CMD1 twice. If it is in the ready state, then the payload (for example, depthcharge) will not send CMD1, but the access mode is only available from the response of CMD1. Therefore, we need to pass the access mode to the payload by defining the following types: - MMC_STATUS_CMD1_READY: in ready state and access mode is byte mode. - MMC_STATUS_CMD1_READY_HCS: in ready state and access mode is sector mode. BUG=b:234672726 BRANCH=cherry TEST=boot ok Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: Iad905781d8ba0105911cf87a6b845cd8df57521e Reviewed-on: https://review.coreboot.org/c/coreboot/+/65054 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-06-07Replace some ENV_ROMSTAGE with ENV_RAMINITKyösti Mälkki
With a combined bootblock+romstage ENV_ROMSTAGE might no longer evaluate true. Change-Id: I733cf4e4ab177e35cd260318556ece1e73d082dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63376 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-06-03soc/mediatek: Rename mtk_wdt_preinit() to mtk_wdt_set_req()Rex-BC Chen
To simplify the calling sequence for mtk_wdt_preinit() and we always adjust request setting in mtk_wdt_preinit(), we rename mtk_wdt_preinit() to mtk_wdt_set_req() and call it in mtk_wdt_init(). From this modification, we can also enable thermal hardware reset feature (CB:64676, CB:64675) in MT8192 and MT8195. BUG=none TEST=build pass Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I1904ff9387f7677a077068f2c3df923bd642ea3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-06-01soc/mediatek/mt8186/pll.c: Fix typo in log messageElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ied8eb0fb51d0521eedd8ff77b1083813d3843570 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-05-28soc/mediatek/mt8192: Enable thermal hardware resetRex-BC Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8192 Function Specification. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I98b062c2070384527624c3bcf0dfded25a2c8ce4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64676 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28soc/mediatek/mt8195: Enable thermal hardware resetRex-BC Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8195 Function Specification. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia6489bb953d148a43af173454d6f2b3e2a1dfcf9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64675 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28soc/mediatek/mt8186: Enable thermal hardware resetRunyang Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8186 Function Specification. BUG=none TEST=emerge-corsola coreboot TEST=thermal hardware reset is working. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: Id2ed55e6d4f4eec450bf7c849f726a389eeb6694 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64659 Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-25soc/mediatek/mt8195: Configure SCP core 2 domain settingTinghan Shen
SCP core 2 is enabled for MT8195 camera feature. It requires the same register access permission as SCP core 1. Therefore, we configure the same domain ID for both cores. BRANCH=cherry BUG=b:193814857 TEST=cherry boot ok Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Change-Id: Idf335593936b12c083c926a252fa99c3b76cda6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/64575 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-20CBMEM: Change declarations for initialization hooksKyösti Mälkki
There are efforts to have bootflows that do not follow a traditional bootblock-romstage-postcar-ramstage model. As part of that CBMEM initialisation hooks will need to move from romstage to bootblock. The interface towards platforms and drivers will change to use one of CBMEM_CREATION_HOOK() or CBMEM_READY_HOOK(). Former will only be called in the first stage with CBMEM available. Change-Id: Ie24bf4e818ca69f539196c3a814f3c52d4103d7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-05-20soc/mediatek: Fill coreboot table with PCIe infoJianjun Wang
In order to pass PCIe base address to payloads, implement pcie_fill_lb() to fill coreboot table with PCIe info. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib2988694f60aac9cbfc09ef9a26d47e01c004406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-05-09soc/mediatek: Demote log level of SPMI clock calibration problem to infoRex-BC Chen
It's expected that the mismatch logs will be shown when doing calibration for spmi clock. If it is failed to do calibration for spmi clock for all data, the system will enter "die". Therefore, we adjust the log level from BIOS_ERR to BIOS_INFO. BUG=b:231531254 TEST=emerge-cherry coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I148b4aeaaeb10e1c269a8eccbb19e8d8e17e40ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/64090 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-09soc/mediatek/mt8186: Change the power-down time slot from 0xA to 0xFzhiyong tao
PMIC_CPSDSA4[4:0] controls the power-down at the specified time slot. Setting it to 0xA would cause an extra delay of 20ms compared to 0xF. The value of time slot is from 0x0 to 0x1F which represents the delay when reset occurs. To avoid the delay, change the value from 0xA to 0xF. This modification is based on chapter 3.7 in the MT8186 functional specification. BUG=b:218630683, b:218630684 TEST=the power-off waveform is correct. Signed-off-by: zhiyong tao <zhiyong.tao@mediatek.corp-partner.google.com> Change-Id: I537fe87740f0f8c25b923d7d536e81503b71762b Reviewed-on: https://review.coreboot.org/c/coreboot/+/64038 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-05soc/mediatek/mt8186: Enlarge CBFS_MCACHE to 16KYu-Ping Wu
The per-file hash for CBFS_VERIFICATION, stored as a CBFS file attribute, would increase the total RO metadata size by 75% (3796->6656 for corsola). Therefore, in order to make RO metadata cache fit into CBFS_MCACHE, enlarge it from 8K to 16K. Adjust the memlayout by decreasing the DRAM_INIT_CODE from 196K to 184K (only 160K needed for now), and moving VBOOT2_WORK region to L2C. Also shuffle the regions in SRAM with better comments. BUG=b:229670703 TEST=emerge-corsola coreboot TEST=Enabled CBFS_VERIFICATION and booted kingler into kernel BRANCH=none Change-Id: I8e07eb9fae1644a0fbfbdc599ca0a0e11bbe54b5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-05-02soc/mediatek/mt8186: Prevent early USB wakeupRex-BC Chen
The MT8186 platform fails to suspend due to premature wakeup by USB. In MT8186, we use low level latch to keep USB wakeup signal. However, hardware could latch a wrong signal if it debounces more than one time. As a result, it would enable wakeup function too early. To prevent this issue, we do the following modification: - Delay about 100 us to enable wakeup function in kernel drivers [1]. - To guarantee 100 us is enough, we need to disable the USB debounce by default in coreboot. According to section register 0x404 and 0x420 in "(CODA) MT8169_PERICFG_REG.xls" which is only for MediaTek internal use: The current default value of debounce register for MT8186 USB IP0 and IP1 is incorrect. The reason we add in coreboot is that the default value should be correct when SoC is booting up. This modification is only for MT8186. The subsequent SoCs will adjust the wakeup function to correct register value by default. [1]: 0d8cfeeef3f5 (usb: xhci-mtk: fix random remote wakeup) TEST=after stress test, not found premature wakeup by USB BUG=b:228773975 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I296c4491c5959670a39fa8bd6ef987557bbc459f Reviewed-on: https://review.coreboot.org/c/coreboot/+/63858 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-07soc/mediatek/mt8186: Disable unused powerRex-BC Chen
To save the power consumption, we disable the unused power of optional components in coreboot. BUG=none TEST=the value of power consumption is as expected. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic0c7c2d1b6a4c26980a3029b60051ab1406406ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/63247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-31soc/mediatek/early_init: Fix function return typeJianjun Wang
Fix return type of early_init_get_elapsed_time_us() to comply with the data type of return value. Also replace memset() with struct initializer. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Fixes: commit 41faa22 (soc/mediatek: Add early_init for passing data across stages) Change-Id: I7c361828362c2dfec91358ad8a420f5360243da0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-29soc/mediatek: Ensure PERST# deassertion time follows the specJianjun Wang
According to the PCIe CEM specification, the deassertion of PERST# should occur at least 100ms after the assertion. To ensure the 100ms delay requirement is met, calculate the elapsed time since assertion. If it is smaller than 100ms, do an extra delay. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the measured PERST# time: [DEBUG] mtk_pcie_domain_enable: 432517 us elapsed since assert PERST# [INFO ] mtk_pcie_domain_enable: PCIe link up success (17 tries) And the SSD information in boot log is as follows: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ie2b7b6174abdf951af5796ab5ed141c45f32fc71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29mb/google/cherry: Pre-initialize PCIe at the bootblock stageJianjun Wang
Described in PCIe CEM specification sections 2.2 (PERST# Signal) and 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should be delayed 100ms (TPVPERL) for the power and clock to become stable. Instead of asserting PERST# right before PCIe initialization and waiting for 100ms, which is currently the only function of 'mtk_pcie_pre_init', so that the extra 100ms delay in ramstage is avoided. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Id5b9369e6f8599f93415588ea585c952a41c5e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek/mt8195: Add early init supportJianjun Wang
Add early init support for MT8195 platform. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I4eb7da53ff76c385cab18bbf84970e96b61662ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/63020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek: Add early_init for passing data across stagesJianjun Wang
Add support for "early_init_data" region, which can be used to store data initialized in an early stage (such as bootblock), and retrieve it in later stages (such as ramstage). TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I01f91b7fe2cbe4f73b5c616bb7aae778dee27d9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek/mt8186: Enable USE_CBMEM_DRAM_INFORex-BC Chen
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8186. Therefore, we select this configuration to enable it. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ieaaf57aaee79c9dce69cc1acaa092207f0f906de Reviewed-on: https://review.coreboot.org/c/coreboot/+/63114 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-29soc/mediatek: Add a configurate "USE_CBMEM_DRAM_INFO"Rex-BC Chen
The memory initialization reference code didn't support returning DRAM information in the old platforms, for example MT8192 and MT8195. So we have to add a new configuration USE_CBMEM_DRAM_INFO to make sure the common code will try to get DRAM information on new platforms supporting that. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iebe9ea0c1d01890b09fdf586813d85adde9702e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek/mt8186: Fix pmif setting for low power modeZhiyong Tao
The current pmif register setting for low power mode is incorrect, which is causing suspend failure. The issue of suspend failure is that SRCLKENA0 will not be pulled down. EC will not be informed AP is suspending now becuase of this. Therefore, add pmif_spmi_set_lp_mode() to correct the setting. This implementation is based on chapter 3.7 in MT8186 Functional Specification. BUG=b:215639203 TEST=test of suspend and resume pass. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Change-Id: I2d02198f19f9cb052fba612c02404a6af1a10adb Reviewed-on: https://review.coreboot.org/c/coreboot/+/63089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-29mb/google/cherry: support max98390 audio ampTrevor Wu
The Cherry follower projects may choose Max98390 for audio output so we have to add a new config CHERRY_USE_MAX98390. Also, the 'dojo' device is the first one to use it. BUG=b:204391159 BRANCH=cherry TEST=emerge-cherry coreboot TEST=Verify beep function through CLI in depthcharge successfully Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Change-Id: I9b6bc5a5520292dd502b0389217f5062479b4490 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63083 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-27soc/mediatek: Include 'console/console.h' when appropriateElyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) Change-Id: I93f930de5a2a477ec4c0d8e5c8c57b25f5e4252c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com>
2022-03-27src/soc/mediatek: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: Ifc85ed8b5660eca11be50fddda0cf32aa1dd611c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-27src: Remove unused <bootmode.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <bootmode.h>' -- src/) <(git grep -l 'platform_is_resuming\|gfx_set_init_done\|gfx_get_init_done\|display_init_required\|get_ec_is_trusted\|get_lid_switch\|get_wipeout_mode_switch\|clear_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_write_protect_state\|init_bootmode_straps' -- src/) |grep "<" Change-Id: I2ebd472e0cfc641bd7e465b8d29272fd2f7520a1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-27soc/mediatek/mt8195: Update audio and adsp power controlChun-Jie Chen
To control I2S in MT8195 for dojo project, we need to enable adsp power before audio power. Therefore, we need to update bus protection steps to correct the setting. TEST=build pass BUG=b:204391159 BRANCH=cherry Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Change-Id: I0bcf1ddeebf0d3df0a1d6b22273123be1aaf85a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63106 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-25soc/mediatek/i2c.c: Remove unused variablesArthur Heymans
Change-Id: Iaa643feb76530cc74acf4d714d8a7f96709be1cf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-23src/mediatek/mt8186: Implement sdram_size() to get real dram sizeXi Chen
Originally, dram size is hard-coded to 4GB by default. To support different dram size, calculate it from the mem chip info stored in CBMEM. BUG=b:206014043 TEST=Output "dram size: 0x100000000" on Kingler Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I017e9d1a2d6e26f1fc21b67b5962dfb5c6ade8a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-23soc/mediatek: Save dram info to cbmemXi Chen
Store dram info in cbmem for ramstage or payloads to use. BUG=b:206014043 TEST=Build pass on Kingler Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I195187c0c757a43bb6d2c57c8f303249f2a7995a Reviewed-on: https://review.coreboot.org/c/coreboot/+/61334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-18soc/mediatek/mt8186: Disable unused spm_thermalRex-BC Chen
In MT8186, we need to disable spm_thermal to prevent it from influencing other wdt status. There are two hardware pathes which are used for asserting watchdog from thermal. We can disable status of path 1 because status of path 2 is used. 1. Thermal -> SPM -> WDT 2. Thermal -> WDT Spm_thermal (path 1) is a flexible option for software control, and the hardware designer suggests that we should disable it if we don't use it. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0ffde6bad3000a64e3b5782edaa72c62da034302 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62890 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18soc/mediatek: Trigger wdt SW reset when wdt status is not equal to 0Rex-BC Chen
Because we close external signal in kernel driver since MT8195, it's more reasonable to trigger sw reset with exteranl signal again whenever the wdt status is not equal to 0. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic6128df7eadaebcf7ff8d4c5492e3e0cfbab6e36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62797 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18soc/mediatek: Set soc_ops.set_resources as no-opYu-Ping Wu
Without setting the set_resources field for soc_ops, we will get an error during device initialization: [ERROR] CPU_CLUSTER: 0 missing set_resources Because the set_resources field is considered mandatory, explicitly set it as no-op noop_set_resources. BUG=b:224419346 TEST=emerge-corsola coreboot TEST=Did not see the error on krabby BRANCH=none Change-Id: Ic82b86f0482a9de09e942c1674be5f0ac615851f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-16soc/mediatek: PCI: Remove global variableJianjun Wang
Remove global variable and use 'pcidev_path_on_root()' to get the base address of PCIe controller. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ia41c82a7aa5d6e9d936e242550851cef83afeae9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-16soc/mediatek: Add chip config for setting PCIe configJianjun Wang
Add chip config for setting PCIe config. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Icff83f2a9f76862065987a74cfcc7e511be80a20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15i2c: Add configurable I2C transfer timeoutJes Klinke
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US, which controls how long to wait for an I2C devices to produce/accept all the data bytes in a single transfer. (The device can delay transfer by stretching the clock of the ack bit.) The default value of this new setting is 500ms. Existing code had timeouts anywhere from tens of milliseconds to a full second beween various drivers. Drivers can still have their own shorter timeouts for setup/communication with the I2C host controller (as opposed to transactions with I2C devices on the bus.) In general, the timeout is not meant to be reached except in situations where there is already serious problem with the boot, and serves to make sure that some useful diagnostic output is produced on the console. Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f Signed-off-by: Jes B. Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-15soc/mediatek/mt8186: change pmic hwcid from warning to infoRex-BC Chen
The pmic hwcid dumping should not be a warning, so we modify it to info. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a930b69bd45d5f0d84c3d269ca721b287dbadea Reviewed-on: https://review.coreboot.org/c/coreboot/+/62775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15soc/mediatek/common: Add halt() after triggering wdt resetRex-BC Chen
It's more reasonable to halt when we trigger watchdog reset because the whole system should be reset afterwards. BUG=b:222217317 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I726ba1599841f63b37062f9ce2e04840e4f250bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/mediatek/mt8195: Enable PCIe supportJianjun Wang
Enable PCIe support for mt8195. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I314572955f1021abe9f2f0f4635670135ed08fff Reviewed-on: https://review.coreboot.org/c/coreboot/+/56793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/mediatek/mt8195: Add driver to configure PCIeJianjun Wang
Add a new function 'mtk_pcie_pre_init' to assert the PCIe reset at early stage to reduce the impact of 100ms delay. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: If6799c53b03a33be91157ea088d829beb4272976 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/mediatek/mt8186: Modify internal capid to 0xE0Rex-BC Chen
The mainboard may not be able to disable the internal cap, so we want to set 0xe0 for all boards to minimize the internal cap. And a mainboard implementation may choose XTAL with higher cload if the frequency requirement is met, and the total capacitance can be tuned externally for different boards. BUG=b:218439447 TEST=set capid to 0xe0. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2139e6b3456d7a50e3cdc8fc606e5f6ea3406044 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62563 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09soc/mediatek/mt8186: set pin drive strength to 8mA for NORRex-BC Chen
Set NOR pin drive to 8mA to comply with HW requirement. This implementation is according to chapter 5.1, 5.6 and 5.8 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=SPI SI tests for AP to NOR pass for both kingler and krabby. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5b6e37b0f7d4207ea35f11394d25ad1e096ac01a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-09soc/mediatek/mt8186: Add GPIO driving functionsGuodong Liu
Add GPIO driving functions to adjust pin driving. The value of drive strength is different for each SoC, so we define GPIO_DRV0 to GPIO_DRV7 which are corresponding to 2/4/6/8/10/12/14/16mA in MT8186. This implementation is according to chapter 5.1 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=build pass Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I6d987f28be98b515fa5c542222bda08bea1d5118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62471 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09commonlib/bsd: Remove cb_err_tJulius Werner
cb_err_t was meant to be used in place of `enum cb_err` in all situations, but the choice to use a typedef here seems to be controversial. We should not be arbitrarily using two different identifiers for the same thing across the codebase, so since there are no use cases for serializing enum cb_err at the moment (which would be the primary reason to typedef a fixed-width integer instead), remove cb_err_t again for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iaec36210d129db26d51f0a105d3de070c03b686b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/mediatek: Add PCIe supportJianjun Wang
Add PCIe support for MediaTek platform. Reference: - MT8195 Register Map V0.3-2, Chapter 3.18 PCIe controller (Page 1250) - linux/drivers/pci/controller/pcie-mediatek-gen3.c This code is based on MT8195 platform, but it should be common in each platform with the same PCIe IP in the future. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib9b6adaafa20aeee136372ec9564273f86776da0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-04soc/mediatek/mt8195: Update header version from 1.8.1 to 1.9.1Ryan Chuang
Move some structures to common folder (CB:61293), so we need to update header version. BUG=none TEST=dram calibration pass Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Id82cbef9cb10dba71489ea96f67c329de9aadc49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-04soc/mediatek/mt8192: Update header version from 1.7.1 to 1.8.1Ryan Chuang
Move some structures to common folder (CB:61293), so we need to update header version for this. BUG=none TEST=dram calibration pass Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I8cf12f4967af116eaef88c1f688567f1da9fa6e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02soc/mediatek/mt8186: Set RTC capid to 0xC0 to pass XTAL 26 MHz testRex-BC Chen
The XTAL 26MHz test failed on krabby, so we adjust RTC capid from default value 0x88 to 0xC0 for MT8186. We also add a new log message to show the capid value which is read from MT6366. This implementation is according to chapter 5.13 in MT8186 Functional Specification. BUG=b:218439447 TEST=set capid to 0xc0. TEST=XTAL 26MHz test passed. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I16ab46a5697d304e8001de231ffc9b7b7a2f9282 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02soc/mediatek: remove unused RTC_GPIO_USER_MASKRex-BC Chen
RTC_GPIO_USER_MASK is not used in any drivers, so we remove them. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0a15d5da142bb38feb595610d69566330e31fedd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-23src/mediatek: Refactor dramc_param to share more structuresXi Chen
The ddr_base_info struct, which stores basic DDR information, should be platform independent. Currently the struct is defined in each SoC's dramc_parah.h. To prevent code duplication, move it as well as other related structs and enums to a common header. Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I99772427f9b0755dc2c778b5f4150b2f8147bcc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-23soc/mediatek/mt8186: disable VSRAM_CORERex-BC Chen
VSRAM_CORE is not used on kingler/krabby, so we disable it. This implementation is according to chapter 3.7 in MT8186 Functional Specification. BUG=b:220071688 TEST=the rail steadily shows 0V in either S0, S3, and S5. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5256f6a2c0ca5a951dc79f564575b526a84463fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62253 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-17soc/mediatek/mt8195/include/soc/addressmap.h: Remove space before tabElyes Haouas
Spaces before tabs are not allowed. Change-Id: I2732c01fd87c56227d47a4c0104de8e227b0cc34 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62018 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-12soc/mediatek: Fix printing SPM versionYu-Ping Wu
Currently the SPM version string is stored at the end of the blob, possibly without a trailing '\0'. Therefore, we should be careful not to print characters beyond the blob size. BUG=b:211944565 TEST=emerge-corsola coreboot TEST=SPM version looked good in AP console BRANCH=asurada,cherry Change-Id: Icfeb686539dc20cf5b78de77c27bdbb137b5d624 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-02-11soc/mediatek/mt8186: Lower SPI NOR speed to 52MHizYu-Ping Wu
The current SPI NOR speed mainpll_d7_d2 (78MHz) is too fast for MT8186's HW design, which is capable of up to 52MHz. Therefore, lower the speed to univpll_d3_d8 (52MHz). BUG=b:218775654 TEST=emerge-corsola coreboot TEST=Boot time didn't increase significantly BRAHCH=none Change-Id: I5a03e41d4ce47d45b97a805b9b98877ef0dac7b7 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-02-11soc/mediatek: Only update required bits when triggering WDT resetRex-BC Chen
To prevent to modify original value of wdt_mode, we use setbits32 to update required bits. BUG=b:218420108 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I743c1af3583c18ec8500fc1eb89f31cdbce5317c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61729 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-10soc/mediatek/mt8173/dramc_pi_calibration_api.c: Remove duplicated "ERROR" in ↵Elyes HAOUAS
log message Change-Id: I846c21bd690372ec416fb3d3b3954bf181b0204c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-09soc/mediatek/mt8186: Fix issue of clearing watchdog statusRex-BC Chen
The implementation of clearing watchdog status is wrong in CB:58835. The value written to the 'wdt_mode' register should be 'wdt_mode | 0x22000000' instead of 'wdt_status | 0x22000000'. BUG=b:204229208 TEST=check watchdog status is cleared. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I8c5dbaab2ac43d3867037bc4160aa5af2d79284f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-09soc/mediatek/mt8186: Support DRAM fast calibration using blobXi Chen
For most MediaTek SoCs (MT8183, MT8192, MT8195) we rely on an external program (e.g., the "DRAM blob") to do the full DRAM calibration first, then store and and apply the generated parameters to the reference "fast DRAM calibration" in the vendor/mediatek folder for normal system boot. Starting with MT8186 the implementation of fast calibration may need to be changed, and a "DRAM blob" only path is introduced for devices that have to do both full and fast calibration using the external blob. TEST=fast calibration pass on kingler/krabby BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: If25a7dd6aa6261ecff79a1b4df8b1f2e53d896dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/61133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-07treewide: Remove "ERROR: "/"WARN: " prefixes from log messagesJulius Werner
Now that the console system itself will clearly differentiate loglevels, it is no longer necessary to explicitly add "ERROR: " in front of every BIOS_ERR message to help it stand out more (and allow automated tooling to grep for it). Removing all these extra .rodata characters should save us a nice little amount of binary size. This patch was created by running find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';' and doing some cursory review/cleanup on the result. Then doing the same thing for BIOS_WARN with 's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi' Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lance Zhao Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-01-29soc/mediatek/mt8186: Add register protect control for MT6366Rex-BC Chen
Some registers of PMIC init settings are protected, so we failed to set the correct value for init_setting. We disable protection before setting PMIC init setting and enable it afterward. BUG=b:216263707 TEST=PMIC setting value is set correctly. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I94d73d9c8a137444988e65c3709d29a3a4c03c5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61390 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-28src/{drivers,soc}: Fix some code indentsElyes HAOUAS
Change-Id: I55682de4a1bc74f170e2044de35b0d8d53ef51ff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-26soc/mediatek/mt8186: Use BIT() macro for arbiter enable bitRex-BC Chen
Replace (1 << x) with BIT(x) in pmic_wrap.h. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I463589f02065a228a8af74447b4586e5b54e0b3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61351 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-26soc/mediatek/mt8186: Update PWRAP arbiter enable bitRex-BC Chen
There is no wakeup source when we test function of suspend and resume. The root cause is that the monitor enable bit of PWRAP is not configured correctly. BUG=b:213255218, b:214978483 TEST=receive wakeup source from MT6366 successfully Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I324d18fa5d3cd745c35fcf0f207e1b444b5e898b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61330 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 05:36:51 +0000