aboutsummaryrefslogtreecommitdiff
path: root/src/soc/mediatek
AgeCommit message (Collapse)Author
2023-10-20device/device.h: Rename pci_domain_scan_busArthur Heymans
On all targets the domain works as a host bridge. Xeon-sp code intends to feature multiple host bridges below a domain, hence rename the function to pci_host_bridge_scan_bus. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I4e65fdbaf0b42c5f4f62297a60d818d299d76f73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78326 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-10-11memlayout.ld: Increase RAMSTAGE size to more than 1MB everywherePatrick Georgi
This is in preparation of a larger heap. I went for 2MB because why not? Change-Id: I51f999a10ba894a7f2f5fce224d30bf914107c38 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-10-09soc/mediatek: PCI: Fix translation windowJianjun Wang
Dojo fails to boot from NVMe with CONFIG_RESOURCE_ALLOCATION_TOP_DOWN enabled. The root cause is using __fls() will get a smaller value when the size is not a power of 2, for example, __fls(0x3000000) = 25. Hence the PCIe translation window size is set to 0x2000000. Accessing addresses higher than 0x2300000 will fail. Fix translation window by splitting the MMIO space to multiple tables if its size is not a power of 2. Resolves: https://ticket.coreboot.org/issues/508. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, it can boot with and without the CONFIG_RESOURCE_ALLOCATION_TOP_DOWN option. BUS=b:298255933 BRANCH=cherry Change-Id: I42b0f0bf9222d284dee0c29f1a6ed6366d6e6689 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78044 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-02soc/mediatek/mt8188: devapc: Add SCP domain settingJason Chen
Configure the SCP to operate within domain 8, allowing it to access only the necessary registers. Any unauthorized access will be prevented by the DAPC. - Set SCP domain from domain 0 to domain 8. - Lock register settings down to prevent unexpected modification. BUG=b:270657858 TEST=scp bootup successful with dapc settings Change-Id: I049486c997542d91bd468e0f4662eafbca4c17e0 Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77883 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-10-02soc/mediatek/mt8188: devapc: Set master domainsNina Wu
Currently, all the masters controlled by DAPC are in domain 0. With this setting, there is a potential security problem. For example, if a certain master is somehow hacked, it may attempt to access registers that it is not supposed to, with successful results. This is due to the fact that, in the current setting, all masters are in domain 0 and can access almost all registers. To prevent this problem, we assign masters to different domains and restrict access to registers based on each domain. This patch sets domains for masters: SSPM - domain 3 CPUEB - domain 14 PCIE0 - domain 2 SPM - domain 9 Change-Id: Ie3e1d5055e72824257b66d6257982652eeb05953 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77862 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-02soc/mediatek/mt8188: devapc: Update permission for master domain setupNina Wu
Currently, all the masters controlled by DAPC are in domain 0. With this setting, there is a potential security problem. For example, if a certain master is somehow hacked, it may attempt to access registers that it is not supposed to, with successful results. This is due to the fact that, in the current setting, all masters are in domain 0 and can access almost all registers. To prevent this problem, we assign masters to different domains and restrict access to registers based on each domain. This patch updates the permission settings for domains 2, 3, 4, 5, 7, 8, 9, and 14, as these domains will be assigned masters in the upcoming patch. BUG=b:270657858 TEST=build pass Change-Id: I6e95ddb5d84a09ff865d7615596430e25b69d3fc Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77861 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-09-22soc/mediatek: Move common devapc definitions to common/Nina Wu
Move following definitions to common/ 1) the definition of the bit fields for domain remap 2) the definition of the structure for the permission of all domains Change-Id: Iac84ebc908ae384a6280388af4120f6349a32ed4 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77860 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24soc/mediatek/mt8188: Remove GPT timer initYidi Lin
GPT timer init is no longer needed after DRAM blob is switching to ARM arch timer. BUG=b:229800119 TEST=boot to kernel Change-Id: Iec1f93c96e791220feed4225959ef15c074ba577 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77388 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-23soc/mediatek/mt8188: Simplify pmif init flowSen Chu
Based on "MediaTek_EFUSE_MT8188_Confidential A_Technical Doc.docx", MT8188G used in ChromeOS project does not support clock hardware monitor. Thus, we can simplify the initialization flow by removing the hardware default value check. BUG=b:292866009 TEST=emerge-geralt coreboot BRANCH=none Change-Id: I07cd753f153da5b0aea1518a04a818214f986aeb Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77334 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-08-14soc/mediatek/mt8173/mt6391: Remove space before semicolonElyes Haouas
Change-Id: I88668d8c69da68cc28bae287f573f650f28da32e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-08-06soc/mediatek/mt8188: Support ARM arch timerYidi Lin
Use ARM architectual timer by initializing frequency to 13 MHz. Since system timer is the source of the architectual timer, we also call `timer_prepare` in `init_timer`. BUG=b:229800119 TEST=run `suite:faft_bios` to verify the firmware stability. check timestamps by cbmem. Cq-Depend: chromium:4747539 Change-Id: I8b1348044e4c92984510604b7f61611e13284d86 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76919 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-14soc/mediatek/common/dsi: Add actual values to the log messagesRuihai Zhou
Per the suggestion in CB:76218, print actual values to the error messages, which may be helpful for debugging. Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: Id3a7a8c76b6ad15e7cf71225d8529f3e034935ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/76442 Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-07-10mb/google/corsola: Add support for AW37503 Power ICRuihai Zhou
The AW37503 is designed to supply positive/negative supply for driving the MIPI panel. It doesn't integrate non-volatile memory(EEPROM), so we need to program the registers at boot. We program the target positive/negative output voltage via I2C and enable the power rails by pulling up ENP and ENN pins. On Starmie, we need +/-6V power supply for the MIPI panel. We program the AW37503 registers in coreboot so that kernel can control AW37503 via fixed regulators without additional settings(what we did for TPS65132). Since we distinguish AW37503 and TPS65132 by reading the vendor ID, we need to initialize I2C bus as early as possible. Therefore, we move mtk_i2c_bus_init() to mainboard_init(). BUG=b:289482828 TEST=emerge-staryu coreboot chromeos-bootimage TEST=Test the sequence the voltage Change-Id: I9ccd4db19c93a032226f006eab0427f78f7b6dc8 Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76219 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26soc/mediatek: Enable DRAM scramble on fast calibration flowXi Chen
No matter what DRAM calibration is performed, DRAM scramble should be enabled as long as MEDIATEK_DRAM_SCRAMBLE is set to y. Currently, DRAM scramble is enabled only if full calibration is performed. Correct the behavior by adding DRAMC_CONFIG_SCRAMBLE to the header config in fast calibration flow. BUG=b:285474337 TEST=Check the scramble feature is disabled on serial build Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I907bccd4e68e040179e1971db6bf7a57b88dec1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/75818 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-21soc/mediatek: Add a prompt string for MEDIATEK_DRAM_SCRAMBLEXi Chen
Make the default MEDIATEK_DRAM_SCRAMBLE value overridable by adding a prompt string. BUG=b:285474337 TEST=build pass and check scramble feature is disabled on serial build Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I703ac9aa3ccc4dd9d0fef9949c6b0d49449971a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75815 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-12soc/mediatek/mt8188: Support 4K resolution displayHsiao Chien Sung
The original clock rate 416MHz is insufficient for 4K resolution and causing the screen to glitch. Set the clock rate to 594MHz to support 4K resolution. BUG=b:236328487 TEST=Glitching screen was fixed after applying this patch Change-Id: Ic40dd28264d03ef7218ff4edd8d4182e0fe74ea3 Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com> Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75661 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-12soc/mediatek/common: Disable DRAM scramble by defaultYidi Lin
Geralt SoC does not support 'persist certain regions' across reboots. Considering the impact of missing ramoops for debugging, set MEDIATEK_DRAM_SCRAMBLE to default n to disable this feature in production FW image. BUG=b:269049451,b:278478563 TEST=emerge-geralt coreboot and confirm CONFIG_MEDIATEK_DRAM_SCRAMBLE=n Signed-off-by: Yidi Lin <yidilin@chromium.org> Change-Id: I109634d811a928e3e6f7f56e706a5b61a52a21ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/75562 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-12soc/mediatek/mt8195: Fix typo for SPIM2_MIYidi Lin
Fix a typo in an enum type name, "PIM2_MI" -> "SPIM2_MI". TEST=emerge-cherry coreboot Signed-off-by: Yidi Lin <yidilin@chromium.org> Change-Id: Ib43a044dc69a93ad1dcaa5e65c66a82046a40777 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2023-06-06mb/google/geralt: Fix MIPI panel power on/off sequenceRuihai Zhou
Based on the power sequence of the panel [1], the power on T2 sequence VSP to VSN should be larger than 1ms, and the power off T2 sequence VSP to VSN should be larger than 0ms. We modify the power sequence to meet the datasheet requirement. [1] B5 TV110C9M-LL0 Product Specification Rev.P0 Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: I4ccb5be04062a0516f84a054ff3f40afbf5279be Reviewed-on: https://review.coreboot.org/c/coreboot/+/75512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-06-01soc/mediatek/common: Add support for power supply TPS65132SRuihai Zhou
The TPS65132S is designed to supply positive/negative driven application. It communicates through standard I2C compatible interface, and it intergrates a EEPROM whose contents will be loaded into the register at startup. Since TPS65132S is used in staryu and geralt projects, we move the implementation to mediatek/common. The datasheet: TPS65132-Single-Inductor-Dual-Output-Power-Supply.pdf BUG=b:282902297 TEST=boot starmie to firmware screen Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: Iad2c9bdea5824455efcef18b44876111061cfa1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/75488 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-26treewide: Remove 'extern' from functions declarationElyes Haouas
"extern" is automatically implied with function declaration. Change-Id: Ic40218acab5a009621b6882faacfcac800aaf0b9 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71890 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-05-13soc/mediatek/mt8195/apusys_devapc.c: Fix unsigned comparisonArthur Heymans
Clang warns about unsigned comparison below 0. Use the enum value itself to fix this warning. Change-Id: I12fccff2fb7d43fd4582afd518a7eab632908a5f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74553 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-05-12soc/mediatek/mt8183: Fix set but unused variablesArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I1c995d942fa25a9268fbf716034335937df57714 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75036 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-04-24soc/mediatek/mt8183: Fix set but unused variableArthur Heymans
This fixes a clang warning. Change-Id: I017ed8601e6ec4c66487e9a6f31e93251515e686 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-04-24soc/mediatek/dptx.c: Remove set but unused variablesArthur Heymans
This fixes clang warning about set but unused variables. Change-Id: I3a3345e33380862d6939b61485f6d1eefa3d1815 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74547 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2023-04-14soc/mediatek: Add assert for regulator VRF12Cong Yang
Add assert for MT6366_VRF12, define a constant macro for 1200000. BUG=none TEST=build board starmie with mt8186. Change-Id: I6d6a969ae993afcda0596a19928e8f98f343d589 Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74394 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-04-14soc/mediatek: Add support for regulator VIO18Cong Yang
To provide power to MIPI panel STA_HIMAX83102_J02, add support for regulator VIO18. BUG=b:272425116 TEST=test firmware display pass for STA_HIMAX83102_J02 on Starmie. Change-Id: I3c3aa105e648b87fc39f881d762002f67b4422b5 Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74341 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
2023-04-10soc/mediatek/mt8188: Set pin drive strength to 8mA for NORJason Chen
Set NOR pin drive to 8mA to comply with HW requirement. This implementation is according to chapter 5.8 and 5.19 in MT8188 Functional Specification. BUG=b:270911452 TEST=boot with following logs [DEBUG] mtk_snfc_init: got pin drive: 0x3 [DEBUG] mtk_snfc_init: got pin drive: 0x3 [DEBUG] mtk_snfc_init: got pin drive: 0x3 [DEBUG] mtk_snfc_init: got pin drive: 0x3 Change-Id: If8344449f5b34cefcaaee6936e94f7f669c7148b Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74064 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8188: Add GPIO driving functionsJason Chen
Add GPIO driving functions to adjust pin driving. This implementation is according to chapter 5.2 in MT8188 Functional Specification. BUG=b:270911452 TEST=build pass Change-Id: I87cb8dc00c90fd5b3c0b8bdf5acb92b6f7393a73 Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74063 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8186: Move GPIO driving-related functions to commonJason Chen
Move GPIO driving-related functions to common for code reuse. BUG=b:270911452 TEST=build pass Change-Id: I234a2b7ef5075313144a930332bed10ffec00c6c Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74068 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8186: Reduce GPIO code size in bootblockJason Chen
Create a new GPIO driving info table that contains only the pins used in the bootblock. The GPIO driving info table is downsized from 1480 bytes to 24 bytes. BUG=b:270911452 TEST=build pass Change-Id: I24775ba93cd74ae401747c2f5a26bbf1c8f6ac0a Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74062 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8188: Reduce lastbus configuration size by 1280 bytesYidi Lin
Original lastbus configuration consumes constant memory size by allocating 16 and 8 members arrays and the utilization is bad. Refactor the lastbus structs to save memory usage. BRANCH=none BUG=none TEST=bootblock.raw.bin size is reduced from 60328 bytes to 59048 bytes. Change-Id: I07ff9ff7c75f03219e1792b92b62814293ef43fe Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74061 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15soc/mediatek/mt8186: Shut down PMIC on power key long pressSen Chu
Currently on power key long press, PMIC will be reset. It would cause an unwanted reset pulse in the power-off sequence. To match expected sequence, change PMIC behavior to "force shutdown". BUG=b:271771606 TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse BRANCH=corsola Change-Id: I9ab35d82e57f43bac99fa8bd7bb69fcf52250311 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73705 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-15soc/mediatek/mt8188: Shut down PMIC on power key long pressSen Chu
Currently on power key long press, PMIC will be reset. It would cause an unwanted reset pulse in the power-off sequence. To match expected sequence, change PMIC behavior to "force shutdown". BUG=b:271771606 TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse Change-Id: I1626892fd582dfab8fe1c1ede1da00549bc97142 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73704 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-10soc/mediatek/mt8188: Enable lastbus debug hardwareot_zhenguo.li
Lastbus is a bus debug tool. When the bus hangs, the bus transmission information before resetting will be recorded. The watchdog cannot clear it and it will be printed out for bus hanging analysis. There are two versions for lastbus: Version 1 for MT8186, and version 2 for MT8188. BUG=b:263753374 TEST=build pass. Change-Id: Ibaf510481d1941376bd8da0168ef17c99a0fb9a2 Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73624 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-03-05mb/google/geralt: Add MAX98390 support for GeraltTrevor Wu
Add a config "USE_MAX98390" to enable MAX98390 support. MAX98390 is an I2S smart amplifier used in Geralt. It is also the default speaker for Geralt reference board. BUG=b:250459803 BRANCH=none TEST=Verify beep function through CLI in depthcharge successfully. Change-Id: I814f440cc5ac2a13404d01fb3baafeec092b1e74 Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73412 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-03-05soc/mediatek/mt8188: Add bus protection for audio/video mtcmosgarmin chang
Bus protection is a HW mechanism to avoid bus hang and incomplete bus transactions. Bus protection HW must be enabled while the receiver of the transaction is not able to respond. BUG=b:264204465 TEST=build pass Change-Id: I14aa63c4934073a14552cef64f40657d0197bbe1 Signed-off-by: garmin chang <garmin.chang@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73375 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-02soc/mediatek: Add config to control DRAM scrambleXi Chen
The DRAM scramble feature enhances DRAM data protection. When it's enabled, the written DRAM data will be scrambled and hence can prevent the data from being hacked. This feature would make debugging more difficult (for example ramoops would be lost after reset). Therefore, add a new config to allow enabling or disabling the feature from coreboot, without having to maintain two versions of the DRAM calibration blob. BUG=b:269049451 TEST=build pass and check scramble enable or disable successfully Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: Ib4279bc1cc960fae9c9f5da39f4448a5627288d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-23soc/mediatek: Add "DRAM" to Kconfig MEDIATEK_BLOB_FAST_INIT nameYu-Ping Wu
In the current Kconfig option MEDIATEK_BLOB_FAST_INIT, the meaning of "BLOB" is unclear. Add "DRAM" to the name. BUG=b:204226005 TEST=./util/abuild/abuild -t GOOGLE_STEELIX -x Change-Id: Ida7bda770f1d1a40cae205b08c8cb22f2329e49f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73155 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-22soc/mediatek/mt8188: Fix audio sampling rateJohnson Wang
The current clock register definition is wrong, which results in wrong audio sampling rate. Fix it by adjusting the POSTDIV registers of APLL1-APLL5. TEST=build pass BUG=b:250459803, b:250464574 Change-Id: I7a627169593f41906856777d738c6b13ff72d5a0 Signed-off-by: Johnson Wang <johnson.wang@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73134 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-22soc/mediatek/mt8188: Fix USB2 detection issueShaocheng Wang
MT8188 supports port0/port1 download. The hardware needs a trapping pin to select the port to use. When port1 is selected, the phy of port1 will be switched to port0. That is, port1 connector will be the physical line of port0. Since port0 phy isn't initialized in coreboot, switch back to port1 phy. BUG=b:269059211 TEST=can detect USB2 devices in depthcharge. Change-Id: Ic97d0bd9d0233883196b2e73ac2a22cd8ea9466b Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-02-09mb/google/geralt: Add power-on sequence for BOE_TV110C9M_LL0Rex-BC Chen
For Geralt, we use BOE_TV110C9M_LL0 as MIPI firmware display, so add the power-on sequence for BOE_TV110C9M_LL0. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: I3ef0b2e26d8cc0dc35c2985363ee4c3557dac8a9 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72749 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-09mb/google/geralt: Init MT6359P only once in ramstageLiju-Clr Chen
The regulator MT6359P is needed by both firmware display and SD card. To avoid duplicate initialization in ramstage, publicize init_pmif_arb() as mt6359p_init_pmif_arb() and call it from mainboard_init(). This would save 13 ms for boot time on Geralt. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: I29498d186ba5665ae20e84985174fc10f8d4accd Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72839 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-08soc/mediatek: Add support for regulator VM18Sen Chu
To provide power to MIPI panel BOE_TV110C9M_LL0, add support for regulator VM18. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: Ib8c3b2df1157b23b37492b1e9b1716903ea67799 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72747 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-08soc/mediatek: Remove unnecessary !! for boolean variableLiju-Clr Chen
Enable is already a boolean, so the !! is not needed. BUG=None TEST=build pass. Change-Id: I25a7cec632f21a258b8364c82e25b59e55ab7453 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72869 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-02soc/mediatek/mt8188: Remove the GPIO setting of USB1_DRV_VBUSLiju-Clr Chen
USB1_DRV_VBUS is used to provide 5V power for USB on MT8188 EVB and it's not used on Geralt. Therefore, remove the GPIO setting of USB1_DRV_VBUS. TEST=read usb data successfully. BUG=b:236331724 Change-Id: Iffea7b288c83c81648d4c7ca30d2f0961f9853ff Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72641 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-01treewide: Remove duplicated include <device/pci.h>Elyes Haouas
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>. Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-19soc/mediatek/mt8188: Allow SSPM to access PWRAP interfaceSen Chu
Allow SSPM to access PWRAP interface. BUG=b:254566089 TEST=build pass and boot to OS. Change-Id: I4b134983dcde1cc293f4b798f91b997baf96d299 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-01-16commonlib/storage: Add common eMMC functionsShelley Chen
Now that multiple platforms are trying to initialize eMMC in coreboot instead of depthcharge, lets move common functionality into commonlib instead of copying the same functionality between multiple platforms. Note for consistency, changed name of set_early_mmc_wake_status() to mmc_set_early_wake_status(). Also adding an mmc_send_cmd1() function for retrieving the Operating Conditions Register (OCR) contents. BUG=b:218406702 BRANCH=None TEST=emerge-herobrine coreboot chromeos-bootimage flash onto villager device and make sure still boots ChromeOS Change-Id: Id00535b05bbd379081712601ef10e762c1831747 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-13soc/mediatek: Include <gpio.h> instead of <soc/gpio.h>Elyes Haouas
<gpio.h> chain-include <soc/gpio.h>. Change-Id: If2af7f77e2d910a3f3470d15dbfc98775a2633b6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2023-01-12soc/mediatek/common/mcu.c: Use 'enum cb_err' instead of 'int'Elyes Haouas
mtk_init_mcu() function already returns enum cb_err. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I562bfbdc5c917a17ce1aa656046b69eb56dce48c Reviewed-on: https://review.coreboot.org/c/coreboot/+/68241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2023-01-11treewide: stop calling custom TPM log "TCPA"Sergii Dmytruk
TCPA usually refers to log described by TPM 1.2 specification. Change-Id: I896bd94f18b34d6c4b280f58b011d704df3d4022 Ticket: https://ticket.coreboot.org/issues/423 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-01-10soc/mediatek/common: Reset the watchdog timer before triggering resetRunyang Chen
When the watchdog timer reaches 0, the timer value won't reset to the default value unless there is an external reset or a kick. It will result in the watchdog failing to trigger the reset signal. We kick the watchdog to reset the timer to the default value. Also, because WDT hardware needs about 94us to synchronize the registers, add a 100us delay before triggering the reset signal. BUG=b:264003005, b:264017048 BRANCH=corsola TEST= Reboot successfully with the following cmd stop daisydog sleep 60 > /dev/watchdog& Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Signed-off-by: Kuan-Hsun Cheng <allen-kh.cheng@mediatek.com> Change-Id: Ic4964103d54910c4a1e675b59c362e93c2213b19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71754 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-23soc/mediatek: Add DEVAPC_DEBUG optionYidi Lin
Add DEVAPC_DEBUG option and set this option to disabled by default. This option prevents DEVAPC log flooding during the boot process. Enable this option when we need to debug DEVAPC issues. TEST=DEVAPC log is disabled by default. Change-Id: I26bc0378b8a766c6a8cc4903d64a921c3e96b93f Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71158 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-22soc/mediatek: Move dapc_init to commonYidi Lin
dapc_init flow is the same on MT8186, MT8188 and MT8195. So move this function to common/devapc.c TEST=emerge-corsola coreboot; emerge-cherry coreboot; emerge-geralt coreboot TEST=devapc log is shown as expected and the system boots to kernel Change-Id: I979c3a3721a82d40c9e2db7fbe62e14a9bbd53d8 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71137 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-13soc/mediatek/common: Use write32p()Elyes Haouas
Change-Id: I83707071fe1801322dffad7fc89afaef5617f3c7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-12mb/google/geralt: Put MIPI panel data in panel_geralt.cBo-Chen Chen
There are eDP and MIPI panels supported in geralt. We put the panels' specified functions - `power_on()` and `configure_panel_backlight()` in panel_geralt.c. Also provide the common interface `get_active_panel()` in panel.c to generalize the display initialization. Since each board may support a different set of MIPI panels, we put the MIPI data in a separate file panel_geralt.c. BUG=b:244208960 TEST=emerge-geralt coreboot Change-Id: Ie928759e020a916f29f0364201a3cf202dc512c3 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-09soc/mediatek/mt8173: Allow BL31 payload not targeting RAMYidi Lin
selfboot.c blocks the payload that does not target RAM. But MT8173 loads and runs BL31 payload in SRAM. Make the exception by implementing `payload_arch_usable_ram_quirk()`. TEST=load and initialize BL31 successfully Change-Id: I8951b1c4673cdae7d1ad0c11d7d6c12376acd328 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70344 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-09mem_chip_info: Update to new formatJulius Werner
The original version of the mem_chip_info structure does not record rank information and does not allow precise modeling of certain DDR configurations, so it falls short on its purpose to compile all available memory information. This patch updates the format to a new layout that remedies these issues. Since the structure was introduced so recently that no firmware using it has been finalized and shipped yet, we should be able to get away with this without accounting for backwards compatibility. BRANCH=corsola Cq-Depend: chromium:3980175 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If34e6857439b6f6ab225344e5b4dd0ff11d8d42a Reviewed-on: https://review.coreboot.org/c/coreboot/+/68871 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com>
2022-12-05soc/mediatek/mt8188: Add support for MIPI panelBo-Chen Chen
We need to add DSI and MIPI_TX settings to support MIPI panel. BUG=b:244208960 TEST=emerge-geralt coreboot Change-Id: Ib430939b4fa2d517d006b4c23d399754ef4583ff Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70184 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-05soc/mediatek: Fix DSI register definition for MT8186Bo-Chen Chen
The DSI CMDQ offset of MT8186 is different from previous SoCs. Therefore, we define two versions for DSI register header files. The v1 is for MT8173/MT8183/MT8192 and the v2 is for MT8186/MT8188. BUG=b:244208960 TEST=build pass BRANCH=corsola Change-Id: I3d13ca03b72554ab7be2b194db32a4f961f38dad Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70183 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-05soc/mediatek/mt8188: Add display data path for MIPI outputBo-Chen Chen
For geralt project, we also support MIPI panel as our firmware display. So add this patch to configure ddp to choose eDP display or MIPI panel display. BUG=b:244208960 TEST=test firmware display pass for both eDP and MIPI panel on MT8188 EVB. Change-Id: I06f38b1889811274588c26e9284da4d502acf38b Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70181 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-23soc/mediatek: Add error handling for dptx_get_edid()Liju-Clr Chen
Skip eDP initialization when we failed to get EDID. This prevents the PLL assertion in dp_intf_config() if the display could not be initialized properly. BUG=b:233720142 TEST=boot to depthcharge on MT8188 EVB. Change-Id: I0fd672b175feb9b813c1d9ec4140e4273079ff07 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69858 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-22src/soc/mediatek: Remove unnecessary space after castsElyes Haouas
Change-Id: I871579cc434820294f285298fe43da4cd1da27a3 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69809 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-18cbmem_top_chipset: Change the return value to uintptr_tElyes Haouas
Get rid of a lot of casts. Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2022-11-18soc/mediatek/mt8188: Enable and initialize EINTJohnson Wang
Issue: Device can't wake up using power key. Root cause and solution: EINT event mask register is used to mask EINT wakeup sources. All wakeup sources are masked by default. So we add a driver here to unmask all wakeup sources. BUG=none TEST=wake the device up by power key on MT8188 EVB. Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Change-Id: I94b20909b0b8d77f75c41bc745f892baded7a54b Reviewed-on: https://review.coreboot.org/c/coreboot/+/69688 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-11-15mb/google/geralt: Enable RTC for eventlog timestampsLiju-Clr Chen
Without RTC, the timestamps in the eventlog are currently all '2000-00-00 00:00:00'. Enable RTC to get the correct timestamps. localhost ~ # head /var/log/eventlog.txt 0 | 2022-10-15 22:59:38 | Log area cleared | 4088 1 | 2022-10-15 22:59:38 | Memory Cache Update | Normal | Success 2 | 2022-10-15 22:59:45 | System boot | 0 3 | 2022-10-15 22:59:46 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown localhost ~ # localhost ~ # date Sun Oct 16 01:42:59 PDT 2022 localhost ~ # BUG=b:233720142 TEST=check the timestamp field in /var/log/eventlog.txt Change-Id: Iddad102dc8d60de01a691d330deb8247e99c616a Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69432 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-12soc/mediatek/mt8195: replace SPDX identifiers to GPL-2.0-only OR MITMacpaul Lin
This replaces 'SPDX-License-Identifier' tags in all the files under soc/mediatek/mt8195 for better code re-use in other open source software stack. These files were originally from MediaTek and follow coreboot's main license: "GPL-2.0-only". Now MediaTek replaces these files to "GPL-2.0-only OR MIT" license. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Change-Id: I79a585c2a611dbfd294c1c94f998d972118b5c52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66625 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2022-11-08vboot: Add VBOOT_CBFS_INTEGRATION supportJakub Czapiga
This patch introduces support signing and verification of firmware slots using CBFS metadata hash verification method for faster initial verification. To have complete verification, CBFS_VERIFICATION should also be enabled, as metadata hash covers only files metadata, not their contents. This patch also adapts mainboards and SoCs to new vboot reset requirements. TEST=Google Volteer/Voxel boots with VBOOT_CBFS_INTEGRATION enabled Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I40ae01c477c4e4f7a1c90e4026a8a868ae64b5ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/66909 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-04lib/coreboot_table: Rename lb_fill_pcieArthur Heymans
By convention 'fill_lb_xxx' is used. Change-Id: I046016b3898308bb56b4ad6a5834ab942fdd50f2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69183 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-04lib/coreboot_table: Simplify API to set up lb_serialArthur Heymans
Instead of having callbacks into serial console code to set up the coreboot table have the coreboot table code call IP specific code to get serial information. This makes it easier to reuse the information as the return value can be used in a different context (e.g. when filling in a FDT). This also removes boilerplate code to set up lb_console entries by setting entry based on the type in struct lb_uart. Change-Id: I6c08a88fb5fc035eb28d0becf19471c709c8043d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-11-04soc/mediatek/mt8188: Disable input-gating for big-core SRAMLiju-Clr Chen
The input-gating is an experimental feature (but unfortunately default enabled) and would lead to crash on MT8188, so we have to disable it in the firmware stage. BUG=b:233720142 TEST=CPUfreq in kernel test pass. Change-Id: Ifd68fe9362587955cdb8598c4cc5c2d0eefe53ca Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69089 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04soc/mediatek/mt8188: Fix AP hang when enabling cpufreq-hw driverLiju-Clr Chen
When enabling cpufreq-hw driver, it is required for MCUPM to access secure registers. Therefore, we enable side-band to allow MCUPM to access the secure registers. BUG=b:236331463 TEST=It works well after boot to login shell. Change-Id: I67b08c38a31a7eae1bc59543a5148a78b61456d6 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69088 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2022-11-04Revert "soc/mediatek/mt8188: Allow CPUfreq hardware to access MCUPM registers"Liju-Clr Chen
This reverts commit a8172c329fe309f3b5b409c1a59a227186400dd4. In the aforementioned patch, we allowed MCUPM to access secure registers and set the domain to DOMAIN_2. Additional attribute settings are also required when a hardware is set to a specific domain. Otherwise, there would be violation between hardware. Since MT8188 is in bring-up stage, we simply enable access register permission for the DOMAIN_0 by default. So remove the wrong setting for MCUPM, SCP and SSPM. We will complete DEVAPC setting when the settings are confirmed. Change-Id: I5d9809f6e84b8d10bc2e6f2ea5a442e676ad3bf9 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69139 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-10-31soc: Add SPDX license headers to MakefilesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic875708697f07b6dae09d27dbd67eb8b960749f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-10-26coreboot_tables: Drop uart PCI addrArthur Heymans
Only edk2 used this to fill in a different struct but even there the entries go unused, so removing this struct element from coreboot has no side effects. Change-Id: Iadd2678c4e01d30471eac43017392d256adda341 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-10-25soc/mediatek/mt8188: replace SPDX identifiers to GPL-2.0-only OR MITRex-BC Chen
For MT8188, the SPDX identifiers are all GPL-2.0-only OR MIT, so replace "GPL-2.0-only" with "GPL-2.0-only OR MIT". Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I5ef6c488b7ef937f6e298670ea75d306b9fe7491 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68759 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-25soc/mediatek/mt8188: Update mtcmos settings for display and audioBo-Chen Chen
- For display, only vdosys0_pwr_con and edp_tx_pwr_con settings are required. - For audio, it requires powering on adsp_ao_pwr_con, adsp_infra_pwr_con and audio_pwr_con. - Add new power domain data `ext_buck_iso_bits` for buck isolation control. BUG=b:244208960 TEST=access display registers successfully. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I7f00bda0cc5c7f8dea55a564a0ff10ae601115b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-10-25soc/mediatek/mt8188: Add eDP support for firmware displayBo-Chen Chen
MT8188 supports eDP as internal display interface. BUG=b:244208960 TEST=emerge-geralt coreboot. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I6441a36557b097e041bc081b907eb60b56c9fbe6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2022-10-25soc/mediatek/mt8188: Add ddp driver to support eDP outputNathan Lu
Add DDP (display data path) driver that supports overlay, read/write DMA, etc. The output goes to display interface DP_INTF0 directly. Add ddp gclast and output_clamp settings to MT8188 to support multi-layer display. BUG=b:244208960 TEST=emerge-geralt coreboot. Signed-off-by: Nathan Lu <nathan.lu@mediatek.com> Change-Id: Icc0a878c609818fedd298c141bb39469fd2f6388 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68487 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-25soc/mediatek/mt8188: Rename SPM registerBo-Chen Chen
The SPM register at offset 0x0 is often named as poweron_config_set in previous MediaTek SoCs. To use common driver, we rename it from poweron_config_en to poweron_config_set. BUG=none TEST=emerge-geralt coreboot. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I31dbf09d668844d3ee74790c657a2ab076e8cdf0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68486 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-25soc/mediatek: Add support for input 1P mode of dp_intfRex-BC Chen
MT8195 supports 2P mode and MT8188 supports 1P mode. A new struct member `input_mode` is added to `struct mtk_dpintf` for differentiation. We also move SoC-specific data `dpintf_data` to soc folder. BUG=b:244208960 TEST=emerge-cherry coreboot. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I6d138b0ff75e005518bc8fcce06df20924b2a6ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/68485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2022-10-25soc/mediatek: Move DP drivers to commonBo-Chen Chen
DP drivers can be shared for both MT8195 and MT8188, so move them to common folder. BUG=b:244208960 TEST=emerge-cherry coreboot. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ic80c03aa6b13e6c9c39fd63b5c1c1cbdbe93a7c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-10-21soc/mediatek: Unify PLL function namesRex-BC Chen
For consistency with the PLL function naming: - Rename edp_mux_set_sel() to mt_pll_edp_mux_set_sel(). - Rename mux_set_sel() to pll_mux_set_sel(). BUG=none TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ifc7b14bf0db5a5461037e2fbf41756d1542ca945 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68622 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add support for PMIC MT6315Sen Chu
On MT8186T, the big cores are powered on by MT6315 via PMIF. This patch adds the following changes. - Add MT6315 settings. - Configure PMIC PMIF for MT6315. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id01931e564b0b5002b8d6b9d13d4f32cdf0ae708 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68620 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek: Move SPMI interface configuration to SoC folderSen Chu
The SPMI interface configuration is SoC-dependent. - MT8192 and MT8195 are the same. - MT8186 does not need to implement this. - MT8188 is different from MT8195, and we will submit another patch to fix this. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I4cf508a0690995a7fe7b7316269d07cb7a799191 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68619 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add PMIF_SPMI_IOCFG_DEFAULT_SETTING Kconfig optionRex-BC Chen
For MT8186, PMIF_SPMI mode is the hardware default setting, so we don't need to configure PMIF SPMI IO pins. Add a config to control that. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I92b54e8379a5dec55ef95cbd72ce03abd3a4954b Reviewed-on: https://review.coreboot.org/c/coreboot/+/68578 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add PWRAP_WITH_PMIF_SPMI Kconfig optionRex-BC Chen
On MT8186, PMIC interface supports PWRAP and PMIF_SPMI while other MediaTek SoCs support PMIF_SPMI and PMIF_SPI. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I20efa6d84975d781972af9143c0c7e3a272653e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68577 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add support for reading CPU IDRex-BC Chen
MT8186 has two slightly different versions: MT8186G and MT8186T (turbo version). Add get_cpu_id() to identify different CPUs. BUG=b:249436110 TEST=cpu id is correct. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I0612dd589e11853dbddc1d99526e9c9bf170acec Reviewed-on: https://review.coreboot.org/c/coreboot/+/68576 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Add DEVAPC settings for ADSPTinghan Shen
Add DEVAPC permission settings for ADSP and set its domain number to 6. TEST=SOF driver is functional. BUG=b:204229221 Change-Id: I37bfea70386af953e89f3c38ac51e41af6aafa6e Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68290 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Inititalize ADSPTinghan Shen
To use SOF correctly, we need to initialize ADSP in coreboot stage. TEST=SOF driver is functional. BUG=b:204229221 Change-Id: I45db587252ccdcdf75e0be2029743034a79925c5 Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68289 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Add mtcmos power-on control for ADSPMandy Liu
To use SOF correctly, we need to enable power domain of ADSP. TEST=SOF driver is functional. BUG=b:204229221 Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Change-Id: I39d1357af5f901a91379fdf7e595f16952b962de Reviewed-on: https://review.coreboot.org/c/coreboot/+/68288 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Enable ADSP clockMandy Liu
To use SOF correctly, we need to enable ADSP clock. TEST=SOF driver is functional. BUG=b:204229221 Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Change-Id: Ia17db889829df2668cf2af1b71c6468230de68e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68287 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-26soc/mediatek/mt8186: Allow SCP to access H264 encoderRunyang Chen
Issue: Camera APP is not functional after CB:67434 applied. Root cause and solution: SCP hardware needs to access H264 encoder registers, so we need to remove the DEVAPC protection of H264 encoder for SCP. BUG=b:247743696 TEST=camera APP is functional. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I95946346018bff6a8f2dc02b1ff3e24ad079fc90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67787 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-22soc/mediatek/mt8188: Allow CPUfreq hardware to access MCUPM registersLiju-Clr Chen
This patch fixes AP hanging issue caused by the handshaking between MCUPM and CPUfreq driver. CPUfreq hardware failed to read MCUPM registers due to DEVAPC permission. Therefore, update the DEVAPC settings to fix this issue. BUG=none TEST=CPUfreq in kernel test pass. Change-Id: I6b30b01fc0be052182599709cbcc9139e6d09742 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67724 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I9cf4097518034fa4c3ae1899840ae3a276936f80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67581 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Set PLLs to hardware default valuesGarmin Chang
Some PLLs are not used in firmware, so we should keep them as hardware default values. If their modules want to set them, the corresponding drivers should set them in the kernel stage. BUG=b:233720142 TEST=build pass. Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com> Change-Id: I9bee18005ffed7fc1785c7fd3c0370c8293064ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/67547 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Fix indention in pll.cGarmin.Chang
BUG=b:233720142 TEST=build pass. Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com> Change-Id: I567d1ded1c3b5e36a25026cec697d43d92d5524c Reviewed-on: https://review.coreboot.org/c/coreboot/+/67546 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Change vpp_sel default mux for 4k supportGarmin Chang
vpp_sel and ethdr_sel are vdosys clock source select mux. Steps to change to support 4K source: 1. Change vpp_sel source to mainpll_d6 to run at 416MHz. 2. Change ethdr_sel source to univpll_d6 to run at 416MHz. BUG=b:233720142 TEST=build pass. Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com> Change-Id: I24f133b9b383fd019983cb29a213b47717148e97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67545 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Fix some wrong settings for PLLsGarmin Chang
The observed CPU big core frequency is double compared with the current PLL setting. Therefore fix the wrong setting for PLL register APMIXED_ARMPLL_BL. Moreover, we also fix some wrong settings for other PLLs. TEST=CPU frequency of big core CPU is correct and bootup correctly. BUG=b:244215537 Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com> Change-Id: I9126f439d7a5136b2fb8d66f103ef427a0b08a99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67543 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-28 09:28:16 +0000