summaryrefslogtreecommitdiff
path: root/src/soc/mediatek
AgeCommit message (Expand)Author
2019-12-20src: Replace min/max() with MIN/MAX()Elyes HAOUAS
2019-12-19soc/{amd,cavium,mediatek,sifive}: Remove unused <stdlib.h>Elyes HAOUAS
2019-12-19src: Remove unneeded 'include <delay.h>'Elyes HAOUAS
2019-12-12soc/mediatek/mt8183: skip fast calibration for high frequency of TX RX windowHuayang Duan
2019-12-04Change all clrsetbits_leXX() to clrsetbitsXX()Julius Werner
2019-11-26soc/mediatek/mt8183: disable BBLPM of DCXO coreWeiyi Lu
2019-11-18include: Make stdbool.h a separate fileJulius Werner
2019-11-16soc/mediatek/mt8183: Get more space for PreRAM memconsoleHung-Te Lin
2019-11-14lib/fmap: Add optional pre-RAM cacheJulius Werner
2019-11-11soc/mediatek: Add missing '#include <console/console.h>'Elyes HAOUAS
2019-11-03arch/arm64: Pass cbmem_top to ramstage via calling argumentArthur Heymans
2019-11-01lib/cbmem_top: Add a common cbmem_top implementationArthur Heymans
2019-11-01soc/{mediatek,sifive}: Remove unused 'include <arch/barrier.h>'Elyes HAOUAS
2019-10-31soc/mediatek/mt8183: Disable DRAM DVFS in recovery modeYu-Ping Wu
2019-10-28soc/mediatek/mt8183: Pass MR values as function argumentsYu-Ping Wu
2019-10-24soc/mediatek/mt8183: Add udelay after setting voltagesYu-Ping Wu
2019-10-24soc/mediatek/mt8183: Improve DRAM calibration logsYu-Ping Wu
2019-10-24soc/mediatek/mt8183: Correct continuation line indentYu-Ping Wu
2019-10-24soc/mediatek/mt8183: Force retraining memory if requestedHung-Te Lin
2019-10-23soc/mediatek/mt8183: Fix incorrect usage of sizeofYu-Ping Wu
2019-10-23soc/mediatek/mt8183: add dphy reset after setting lanes numberJitao Shi
2019-10-23soc/mediatek/mt8183: fine tune the phy timingJitao Shi
2019-10-21src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>'Elyes HAOUAS
2019-10-21soc/mediatek/mt8183: Force DRAM retraining if hotkey pressedYu-Ping Wu
2019-10-21soc/mediatek/mt8183: Skip fast calibration in recovery modeYu-Ping Wu
2019-10-20src: Remove unused 'include <string.h>'Elyes HAOUAS
2019-10-18soc/mediatek/mt8183: Compress calibration blob with LZ4Hung-Te Lin
2019-10-18soc/mediatek/mt8183: Pass impedance data as a function argumentYu-Ping Wu
2019-10-18soc/mediatek/mt8183: Run calibration with multiple frequencies for DVFS switchHuayang Duan
2019-10-18soc/mediatek/mt8183: Adjust DRAM voltages for each DRAM frequencyHuayang Duan
2019-10-18soc/mediatek/mt8183: Allow modifying vddq voltageHsin-Hsiung Wang
2019-10-18soc/mediatek/mt8183: Allow modifying vdram1 voltageHsin-Hsiung Wang
2019-10-18soc/mediatek/mt8183: Share console for calibration blob outputHung-Te Lin
2019-10-17soc/mediatek/mt8183: Verify checksum of cached calibration dataYu-Ping Wu
2019-10-17soc/mediatek/mt8183: Remove unnecessary DRAM register settingsYu-Ping Wu
2019-10-17soc/mediatek/mt8183: Fix DDR phy config numberYu-Ping Wu
2019-10-17soc/mediatek/mt8183: Refactor DRAM init by bit fields APIHung-Te Lin
2019-10-17soc/mediatek/mt8183: Improve code formattingYu-Ping Wu
2019-10-17soc/mediatek/mt8183: Handle memory test failureYu-Ping Wu
2019-10-09soc/mediatek/mt8183: Change argument type of mt_set_emiYu-Ping Wu
2019-10-09soc/mediatek/mt8183: Run DRAM full calibrationHuayang Duan
2019-10-09soc/mediatek/mt8183: Use cached calibration result for faster bootupHuayang Duan
2019-10-09soc/mediatek/mt8183: Add the shared 'dramc_param' moduleYu-Ping Wu
2019-10-09soc/mediatek/mt8183: Simplify usage of dramc_engine2_endYu-Ping Wu
2019-10-02mediatek/mt8183: Rename fields of struct sdram_paramsYu-Ping Wu
2019-10-01mediatek/mt8183: Allow modifying vcore voltageHsin-Hsiung Wang
2019-09-30mediatek/mt8183: Init SPM driverDawei Chien
2019-09-24mediatek/mt8183: Use different DRAM frequencies for eMCP DDRHuayang Duan
2019-09-20mediatek/mt8183: Support more DRAM frequency bootupHuayang Duan
2019-09-20mediatek/mt8183: Implement the dramc init settingHuayang Duan
2019-09-19cpu,mb,soc: Init missing lb_serial struct fieldsJacob Garber
2019-09-16mediatek/mt8183: Add soc ARM Trusted Firmware supportkenny liang
2019-09-14arm64: Uprev Arm TF and adjust to BL31 parameter changesJulius Werner
2019-09-10mediatek/mt8183: Add new option for eMCP DDRHuayang Duan
2019-09-06soc/mediatek: Fix USB enumeration issueChangqi Hu
2019-09-04mediatek/mt8183: postpone dcxo low power mode settingWeiyi Lu
2019-09-02mediatek/mt8183: Remove unnecessary parenthesesYu-Ping Wu
2019-08-30arm64: Rename arm_tf.c/h to bl31.c/hJulius Werner
2019-08-21mediatek/mt8183: add scp voltage initializationHsin-Hsiung Wang
2019-08-21mediatek/mt8183: Enlarge PRERAM_CBFS_CACHE regionTristan Shieh
2019-08-21mediatek/mt8183: Overlap decompressor, verstage and romstageTristan Shieh
2019-08-21mediatek: Use GPIO based SPI CSYu-Ping Wu
2019-08-20arch/non-x86: Remove use of __PRE_RAM__Kyösti Mälkki
2019-08-15soc/mediatek: Change DSI init commands to take flexible length arrayHung-Te Lin
2019-08-15soc/mediatek/mt8183: Add DSI driverHung-Te Lin
2019-08-15soc/mediatek: dsi: Support sending MIPI init commandsHung-Te Lin
2019-08-15soc/mediatek: dsi: Refactor video timing calculationHung-Te Lin
2019-08-14soc/mediatek: dsi: Refactor PHY timing calculationHung-Te Lin
2019-08-13soc/mediatek: dsi: Refactor MIPI TX configurationHung-Te Lin
2019-08-13soc/mediatek: dsi: Unify format to bpp conversionHung-Te Lin
2019-08-13soc/mediatek: Create common DSI driver from mt8173Hung-Te Lin
2019-08-09soc/mediatek/mt8183: Add display controller driverYongqiang Niu
2019-08-09soc/mediatek/mt8173: Refactor display driver to share common partsHung-Te Lin
2019-08-09soc/mediatek/mt8173: Remove dual DSI modeHung-Te Lin
2019-08-07mediatek/mt8183: Add I2C driver codeQii Wang
2019-08-02mediatek: Refactor I2C code among similar SOCsQii Wang
2019-07-26soc/mediatek/mt8183: Init SSPMErin Lo
2019-07-25soc/mediatek: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
2019-07-23mediatek/mt8183: Add md power-off flowYanjie Jiang
2019-07-22soc/mediatek/mt8183: Support SSPMErin Lo
2019-07-21mediatek/mt8183: Calibrate RTC eosc clockRan Bi
2019-07-11mediatek: Fill in input_hertz to coreboot tableTristan Shieh
2019-07-09arch/non-x86: Flip HAVE_MONOTONIC_TIMER defaultKyösti Mälkki
2019-07-07mediatek/mt8183: update dcxo output buffer settingWeiyi Lu
2019-07-06mediatek/mt8183: Enable RTC eosc calibration feature to save powerRan Bi
2019-06-21mediatek/mt8183: support SAMSUNG and MICRON EMCP LPDDR4X DDR bootupHuayang Duan
2019-06-21mediatek/mt8183: fix mode register setting fail issueHuayang Duan
2019-06-21mediatek/mt8183: enable DDR low power featuremtk11195
2019-06-21mediatek/mt8183: set vproc12 voltage correctlyHsin-Hsiung Wang
2019-06-21mediatek/mt8183: Add infra group DCM settingWeiyi Lu
2019-06-21mediatek: Add SPI tick_dly settingMengqi Zhang
2019-06-21mediatek/mt8183: Add SPI GPIO driving settingMengqi Zhang
2019-06-21mediatek/mt8183: Support RTC in ramstageYou-Cheng Syu
2019-06-21mediatek/mt8183: Add efuse calibration in auxadcjg_poxu
2019-06-21mediatek/mt8183: Calibrate vsim2 to 2.7 VHsin-Hsiung Wang
2019-05-29src/soc: Add missing 'include <types.h>'Elyes HAOUAS
2019-05-06mediatek/mt8183: Wait 200us for voltages to settleTristan Shieh
2019-04-30vboot: refactor OPROM codeJoel Kitching
2019-04-29mediatek: Add function to raise the CPU frequencyTristan Shieh
2019-04-29mediatek/mt8183: Set CPU frequency to 1417MHzTristan Shieh