Age | Commit message (Collapse) | Author |
|
This replaces 'SPDX-License-Identifier' tags in all the files under
soc/mediatek/mt8195 for better code re-use in other open source
software stack.
These files were originally from MediaTek and follow coreboot's main
license: "GPL-2.0-only". Now MediaTek replaces these files to
"GPL-2.0-only OR MIT" license.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Change-Id: I79a585c2a611dbfd294c1c94f998d972118b5c52
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66625
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch introduces support signing and verification of firmware
slots using CBFS metadata hash verification method for faster initial
verification. To have complete verification, CBFS_VERIFICATION should
also be enabled, as metadata hash covers only files metadata, not their
contents.
This patch also adapts mainboards and SoCs to new vboot reset
requirements.
TEST=Google Volteer/Voxel boots with VBOOT_CBFS_INTEGRATION enabled
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I40ae01c477c4e4f7a1c90e4026a8a868ae64b5ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66909
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
By convention 'fill_lb_xxx' is used.
Change-Id: I046016b3898308bb56b4ad6a5834ab942fdd50f2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69183
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of having callbacks into serial console code to set up the
coreboot table have the coreboot table code call IP specific code to get
serial information. This makes it easier to reuse the information as the
return value can be used in a different context (e.g. when filling in a
FDT).
This also removes boilerplate code to set up lb_console entries by
setting entry based on the type in struct lb_uart.
Change-Id: I6c08a88fb5fc035eb28d0becf19471c709c8043d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The input-gating is an experimental feature (but unfortunately default
enabled) and would lead to crash on MT8188, so we have to disable it
in the firmware stage.
BUG=b:233720142
TEST=CPUfreq in kernel test pass.
Change-Id: Ifd68fe9362587955cdb8598c4cc5c2d0eefe53ca
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69089
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When enabling cpufreq-hw driver, it is required for MCUPM to access
secure registers. Therefore, we enable side-band to allow MCUPM to
access the secure registers.
BUG=b:236331463
TEST=It works well after boot to login shell.
Change-Id: I67b08c38a31a7eae1bc59543a5148a78b61456d6
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69088
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
|
|
This reverts commit a8172c329fe309f3b5b409c1a59a227186400dd4.
In the aforementioned patch, we allowed MCUPM to access secure
registers and set the domain to DOMAIN_2.
Additional attribute settings are also required when a hardware is
set to a specific domain. Otherwise, there would be violation between
hardware. Since MT8188 is in bring-up stage, we simply enable access
register permission for the DOMAIN_0 by default. So remove the wrong
setting for MCUPM, SCP and SSPM.
We will complete DEVAPC setting when the settings are confirmed.
Change-Id: I5d9809f6e84b8d10bc2e6f2ea5a442e676ad3bf9
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69139
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic875708697f07b6dae09d27dbd67eb8b960749f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Only edk2 used this to fill in a different struct but even there the
entries go unused, so removing this struct element from coreboot has
no side effects.
Change-Id: Iadd2678c4e01d30471eac43017392d256adda341
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
For MT8188, the SPDX identifiers are all GPL-2.0-only OR MIT, so
replace "GPL-2.0-only" with "GPL-2.0-only OR MIT".
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I5ef6c488b7ef937f6e298670ea75d306b9fe7491
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68759
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- For display, only vdosys0_pwr_con and edp_tx_pwr_con settings are
required.
- For audio, it requires powering on adsp_ao_pwr_con,
adsp_infra_pwr_con and audio_pwr_con.
- Add new power domain data `ext_buck_iso_bits` for buck isolation
control.
BUG=b:244208960
TEST=access display registers successfully.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7f00bda0cc5c7f8dea55a564a0ff10ae601115b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
MT8188 supports eDP as internal display interface.
BUG=b:244208960
TEST=emerge-geralt coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6441a36557b097e041bc081b907eb60b56c9fbe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add DDP (display data path) driver that supports overlay, read/write
DMA, etc. The output goes to display interface DP_INTF0 directly.
Add ddp gclast and output_clamp settings to MT8188 to support
multi-layer display.
BUG=b:244208960
TEST=emerge-geralt coreboot.
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Change-Id: Icc0a878c609818fedd298c141bb39469fd2f6388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68487
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPM register at offset 0x0 is often named as poweron_config_set in
previous MediaTek SoCs. To use common driver, we rename it from
poweron_config_en to poweron_config_set.
BUG=none
TEST=emerge-geralt coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I31dbf09d668844d3ee74790c657a2ab076e8cdf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68486
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8195 supports 2P mode and MT8188 supports 1P mode. A new struct
member `input_mode` is added to `struct mtk_dpintf` for
differentiation. We also move SoC-specific data `dpintf_data` to soc
folder.
BUG=b:244208960
TEST=emerge-cherry coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6d138b0ff75e005518bc8fcce06df20924b2a6ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
DP drivers can be shared for both MT8195 and MT8188, so move them to
common folder.
BUG=b:244208960
TEST=emerge-cherry coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic80c03aa6b13e6c9c39fd63b5c1c1cbdbe93a7c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
For consistency with the PLL function naming:
- Rename edp_mux_set_sel() to mt_pll_edp_mux_set_sel().
- Rename mux_set_sel() to pll_mux_set_sel().
BUG=none
TEST=build pass.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifc7b14bf0db5a5461037e2fbf41756d1542ca945
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68622
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On MT8186T, the big cores are powered on by MT6315 via PMIF. This
patch adds the following changes.
- Add MT6315 settings.
- Configure PMIC PMIF for MT6315.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id01931e564b0b5002b8d6b9d13d4f32cdf0ae708
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68620
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPMI interface configuration is SoC-dependent.
- MT8192 and MT8195 are the same.
- MT8186 does not need to implement this.
- MT8188 is different from MT8195, and we will submit another patch to
fix this.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I4cf508a0690995a7fe7b7316269d07cb7a799191
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68619
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For MT8186, PMIF_SPMI mode is the hardware default setting, so we don't
need to configure PMIF SPMI IO pins. Add a config to control that.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I92b54e8379a5dec55ef95cbd72ce03abd3a4954b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68578
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On MT8186, PMIC interface supports PWRAP and PMIF_SPMI while other
MediaTek SoCs support PMIF_SPMI and PMIF_SPI.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I20efa6d84975d781972af9143c0c7e3a272653e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68577
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8186 has two slightly different versions: MT8186G and MT8186T
(turbo version). Add get_cpu_id() to identify different CPUs.
BUG=b:249436110
TEST=cpu id is correct.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I0612dd589e11853dbddc1d99526e9c9bf170acec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68576
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add DEVAPC permission settings for ADSP and set its domain number to 6.
TEST=SOF driver is functional.
BUG=b:204229221
Change-Id: I37bfea70386af953e89f3c38ac51e41af6aafa6e
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68290
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To use SOF correctly, we need to initialize ADSP in coreboot stage.
TEST=SOF driver is functional.
BUG=b:204229221
Change-Id: I45db587252ccdcdf75e0be2029743034a79925c5
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68289
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To use SOF correctly, we need to enable power domain of ADSP.
TEST=SOF driver is functional.
BUG=b:204229221
Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com>
Change-Id: I39d1357af5f901a91379fdf7e595f16952b962de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68288
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To use SOF correctly, we need to enable ADSP clock.
TEST=SOF driver is functional.
BUG=b:204229221
Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com>
Change-Id: Ia17db889829df2668cf2af1b71c6468230de68e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68287
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Issue:
Camera APP is not functional after CB:67434 applied.
Root cause and solution:
SCP hardware needs to access H264 encoder registers, so we need to
remove the DEVAPC protection of H264 encoder for SCP.
BUG=b:247743696
TEST=camera APP is functional.
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: I95946346018bff6a8f2dc02b1ff3e24ad079fc90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67787
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch fixes AP hanging issue caused by the handshaking between
MCUPM and CPUfreq driver.
CPUfreq hardware failed to read MCUPM registers due to DEVAPC
permission. Therefore, update the DEVAPC settings to fix this issue.
BUG=none
TEST=CPUfreq in kernel test pass.
Change-Id: I6b30b01fc0be052182599709cbcc9139e6d09742
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67724
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I9cf4097518034fa4c3ae1899840ae3a276936f80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67581
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some PLLs are not used in firmware, so we should keep them as hardware
default values. If their modules want to set them, the corresponding
drivers should set them in the kernel stage.
BUG=b:233720142
TEST=build pass.
Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com>
Change-Id: I9bee18005ffed7fc1785c7fd3c0370c8293064ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67547
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:233720142
TEST=build pass.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Change-Id: I567d1ded1c3b5e36a25026cec697d43d92d5524c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67546
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
vpp_sel and ethdr_sel are vdosys clock source select mux.
Steps to change to support 4K source:
1. Change vpp_sel source to mainpll_d6 to run at 416MHz.
2. Change ethdr_sel source to univpll_d6 to run at 416MHz.
BUG=b:233720142
TEST=build pass.
Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com>
Change-Id: I24f133b9b383fd019983cb29a213b47717148e97
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67545
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The observed CPU big core frequency is double compared with the current
PLL setting. Therefore fix the wrong setting for PLL register
APMIXED_ARMPLL_BL.
Moreover, we also fix some wrong settings for other PLLs.
TEST=CPU frequency of big core CPU is correct and bootup correctly.
BUG=b:244215537
Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com>
Change-Id: I9126f439d7a5136b2fb8d66f103ef427a0b08a99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67543
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since mono_time is now 64-bit, the utility functions interfacing with
mono_time should also be 64-bit so precision isn't lost.
Fixed build errors related to printing the now int64_t result of
stopwatch_duration_[m|u]secs in various places.
BUG=b:237082996
BRANCH=All
TEST=Boot dewatt
Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Lastbus is a bus debug tool. When the bus hangs, the bus transmission
information before resetting will be recorded.
The watchdog cannot clear it and it will be printed out for bus hanging
analysis.
TEST=build pass.
BUG=none
Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com>
Change-Id: Iff39486dfad556a3104b2f2b6811c34c2ded6954
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable the protection for DEVAPC registers of AO domain.
TEST=build pass.
BUG=b:244250435
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: I8535438d4c7da29c9dcd97be9a2af05ea4690064
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67434
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the previous patch (CB:60317), only basic settings were added. Now
complete DEVPAC settings on MT8186.
1. Update permission setting
2. Update master domain setting:
- domain 4: SCP
- domain 5: SPM
3. Set domain remap
- MMSYS (4-bit to 2-bit)
TEST=test on kernel correctly.
BUG=b:204229221
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: I40a9b115fb21b6b955fde358241f4483b85e3db3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67433
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. There are two power sources for CPU:
- Logic power (VPROC).
- SRAM power (VSRAM_PROC).
2. There is a constraint between VPROC and VSRAM_PROC:
- 0mV <= VSRAM_PROC - VPROC <= 250mV.
With software control, the constraint might not always hold. Therefore,
we enable hardware tracking from PMIC MT6366 to ensure the constraint
is met automatically.
BUG=b:236353282, b:241615706
TEST=meet the constrain correctly when adjusting the voltage.
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Change-Id: I6012c57e60c009f1d599b57aab1c2526ee789208
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67436
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the name of the CALIBRATION_REGION definitions used in two
separate locations. This conflict was causing an error for the
lint-001-no-global-config-in-romstage test.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If6734f2a7d9be669586ea350fb9979fcd422b591
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable configuration to build with MT8186 arm-trusted-firmware drivers.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id16405c84f6e0a2e21f95cc45babf85bd980b43e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67356
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pass the reset gpio parameter to BL31 to support SoC reset.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifdfbd6bd82f64b084f6349cb617443053c89a3f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67357
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The implementations of register_reset_to_bl31() are the same for
MedaiTek platforms, so we extract them to soc/common/bl31.c.
BUG=None
TEST=build pass
Change-Id: I297ea2e18a6d7e92236cf415844b166523616bdf
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some of the pll settings are incorrect, which cause problems in GPU
after booting into kernel.
- MFGPLL opp_ck_en bit isn't located at MFGPLL_CON1, so we need to fix
it to enable MFGPLL properly.
- Switch SPMI clock muxes to 260M to avoid kernel hang while probing
SPMI kernel driver.
TEST=GPU bringup correctly.
BUG=b:233720142
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Change-Id: I971109a5f72e3307899daaf5a5f26022124b559b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67355
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add support for loading SPM firmware from CBFS to SPM SRAM. SPM needs
its own firmware to enable SPM suspend/resume function which turns off
several resources such as DRAM/mainpll/26M clk when linux system
suspend.
SPM is an essential component on MediaTek SoC, so we initialize PPM
in soc_init(). For MT8188, SPM will handshake with DPM to do
initialization, so we need to call spm_init() after dpm_init().
This SPM flow adds 33ms to the boot time.
firmware log:
mtk_init_mcu: Loaded (and reset) spm_firmware.bin in 25 msecs
SPM: spm_init done in 33 msecs, spm pc = 0x400
TEST=spm pc is 0x400 which is in idle state.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I1a1f49383e0ceadc259a18272fc1c277b65406ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and
MT8188, so we move them to common/spm.c.
TEST=build pass.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The unit of current_clk in pmif_ulposc_check() should be MHz. We use
pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz.
Without this modification, the judgement in pmif_ulposc_check() is
alway wrong due to the wrong unit.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add basic DEVAPC (device access permission control) driver.
DEVAPC driver is used to set up bus fabric security and data protection
among hardwares. DEVAPC driver groups the master hardwares into
different domains and gives secure and non-secure property. The slave
hardware can configure different access permissions for different
domains via DEVAPC driver.
1. Initialize DEVAPC.
2. Set master domain and secure side band.
3. Set default permission.
TEST=check logs of DEVAPC ok.
BUG=b:236331724
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Change-Id: Iad3569bc6f8ba032d478934ba839dc4b5387bafc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some enums and functions are the same in DEVAPC driver for MT8195,
MT8186, and MT8188, so we move them to common folder.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add initialization of DPM drvier for DRAM low power mode.
DPM is an essential component on MediaTek SoC, so we initialize DPM
in soc_init().
This DPM flow adds 22ms to the boot time.
coreboot logs:
CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110
mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes)
CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140
mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes)
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: Ia68aca1d1e8729739246157904727123e5d001e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66968
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DPM is a hardware module for DRAM power management, which is used for
DRAM low power mode.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I872396fe2c5accd92ba5c14b124125bd58257771
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66967
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8195 and MT8188 share the same dpm_4ch.c, so we move it to common
folder.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I13406707d3b331ced57af62f4ba4f365e9ac4f84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66966
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8188. Therefore,
we select this configuration to enable it.
TEST=build pass
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I14f3d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66280
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The emi.c is the same for MT8186 and MT8188, so we could move it to
the common folder and reuse it.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I225f1d07c973129172f01bf7f4d7f5d5abe7c02b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66328
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define fields of sdram_params and enable MEDIATEK_BLOB_FAST_INIT to
run fast calibration for MT8188 using blob.
DRAM fast calibration logs:
DRAM-K: Fast calibration passed in 19530 msecs
dram size (romstage): 0x200000000
TEST=Fast calibration pass.
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2468d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
- Use common SoC drivers for DRAM calibration support.
- Remove emi.h because sdram_size() is already declared in
common/include/soc/emi.h.
- Add dramc_param.h and dramc_soc.h to prepare for implementation of
DRAM full calibration.
TEST=build pass
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2f88d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
spm_set_power_control() is already called in spm_init(). It is not
necessary to call spm_set_power_control() again in the mtk_mcu reset
callback.
TEST=check SPM PC value (0x250) after SPM is loaded.
[INFO ] SPM: spm_init done in 54 msecs, spm pc = 0x250
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: I7ee517e1eb6485c52155a69d05781a61ddfe4cad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66785
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DFD (Design for Debug) is a debugging tool, which scans flip-flops
and dumps to internal RAM on the WDT reset. After system reboots,
those values can be shown for debugging using MTK internal parsing
tools.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6d19dc6f4e47ed69ba2ea87c79984020a413aee9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66586
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We use the same dump address and size for DFD in all MediaTek SoCs, so
we move them to dfd_common.h and rename dfd_common.h to dfd.h.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I162bbb0a82e3b55c8cfbbd20e28a54ad01fd6b0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66585
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie9d7b361dda8c5850bc0682c255bc20f9e26675c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66668
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tracker is a debugging tool. When bus timeout occurs, the system will
reboot and latch some values of tracker registers which could be used
for debugging.
This function will be triggered only when it encounters the bus
hanging issue.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I78f676c08ea44e9bb10bd99bbfed70e3e8ece993
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66584
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This replaces 'SPDX-License-Identifier' tags in all the files under
soc/mediatek/mt8188 for better code re-use in other open source
software stack.
These files were originally from MediaTek and follow coreboot's main
license: "GPL-2.0-only". Now MediaTek replaces these files to
"GPL-2.0-only OR MIT" license.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Change-Id: If61e8b252400e8e5ecd185b6806b1ca279065f15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66628
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
When powering down SSUSB, the system needs to wait the ACK from SSUSB.
We found that the setting of USB PAD top macro is not correct and
it will cause timeout waiting for the ACK from SSUSB.
To resolve this, we add mt_pll_set_usb_clock() in pll.c to enable usb
macro control for powering down SSUSB.
TEST=timeout of ssusb powerdown ack does not occur.
BUG=b:239634625
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.corp-partner.google.com>
Change-Id: I58ba86e0467284e9947bfda1005c151a3e0c8881
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66600
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some definitions are the same in dramc_soc.h for MT8192, MT8195 and
MT8186, so we move them to dramc_soc_common.h
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3095333e62abf98de1f2d27033baeeba7a4cad79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66276
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The gpios and the tick delay register are different between MT8188
and previous MediaTek SoCs, so we need to add this patch to support
SPI.
TEST=build pass
BUG=b:236331724
Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com>
Change-Id: I6065b9d285dfd36c191f274f500fdb694920276e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66185
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8188 SPI tick delay setting is moved to `spi_cmd_reg` register which
is different from previous SoCs, so we define a macro to get the
designated register.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia30e94a8688c0e1c1d4b3d15206f28e5bd8c9bd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66184
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass.
BUG=b:233720142
Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com>
Change-Id: Ic300b70a38ac204b098ca9ab15cf7045b66fd76d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66182
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add RTC header file for SoC-specific settings. Add RTC support in
romstage.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com>
Change-Id: I38115ce0c9a4e1c1b2b7c8e6d40f47e99f7f86b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66181
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the common definitions to rtc_reg_common.h, so we can reuse those
definitions on MT8188.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia1d916a88b7cb875b35ee5813b7b52d9e98f5009
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66180
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=get voltage as 340mV for channel 0 in MTK EVB.
BUG=b:233720142
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: Idd1edcce6cb62fcf6991bb9342c409150989c5ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The AUXADC register definitions are the same for all MediaTek SoCs, so
we move struct mtk_auxadc_regs to auxadc_common.h.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I48978a93137a7de42f8ea2873be3130cb8f534f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
To avoid unnecessary PCIe early initialization for non-NVMe devices
(which would take about 150ms on dojo), skip setting PCIe ops when
initializing mt8195 SoC.
BUG=b:238850212
TEST=emerge-cherry coreboot
TEST=Dojo SKU1 (eMMC) boot time <= 1s
BRANCH=cherry
Change-Id: I8945890ba422c0c4eb42683935220b7afbb80dfd
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Implement mainboard_needs_pcie_init() for cherry as a callback for
mt8195 SoC to determine whether to initialize PCIe. When the SKU id is
unknown or unprovisioned (for example at the beginning of the factory
flow), we should still initialize PCIe. Otherwise the devices with NVMe
will fail to boot.
BUG=b:238850212
TEST=emerge-cherry coreboot
BRANCH=cherry
Change-Id: I2ed0ceeb37d2924ca16485fb2d130959a7eff102
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
SSPM is "Secure System Power Manager" that provides power control in
secure domain. The initialization flow is to load SSPM firmware to
its SRAM space and then enable.
It takes 21 ms to load sspm.bin.
coreboot logs:
CBFS: Found 'sspm.bin' @0x21680 size 0xa815 in mcache @0xffffeac4
mtk_init_mcu: Loaded (and reset) sspm.bin in 21 msecs (137348 bytes)
TEST=we can see the sspm logs.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ib6443b64734048c1d71eeac650f36d7c4ac709cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Load MCUPM firmware and boot up MCUPM in ramstage.
It takes 41 ms to load mcupm.bin.
coreboot logs:
CBFS: Found 'mcupm.bin' @0x12580 size 0xf0c6 in mcache @0xffffead0
mtk_init_mcu: Loaded (and reset) mcupm.bin in 41 msecs (122184 bytes)
TEST=we can see the mcupm logs after reset releases.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id1e62d9d6ede1c453e03eeda0d9b16fafa9e2372
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Geralt reference design has both eMMC and SD card interfaces, so we have
to configure both in ramstage.
Implement msdc.c (mass storage device class) to place the eMMC and SD
card drivers.
This implementation is based on chapter 5.9 in MT8188 Functional
Specification.
TEST=boot to kernel using emmc successfully.
BUG=b:236331724
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com>
Change-Id: I6594c8466a133d3fdb0084716acca8dcf785f94f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65975
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Control regulator more easily with regulator interface.
TEST=measure 3.0V in VMCH and VMC.
BUG=b:236331724
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I9727475774b3b9a8dcd49e5e60e133f9d745b407
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65875
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because 0 and 1 are the only possible values,
1. Change input argument "enable" of mainboard_enable_regulator to bool.
2. Change return value of mainboard_regulator_is_enabled() to bool.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iae09c5fedf8f7394bfbb677e5aee37ed061304fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65997
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From comments of CB:65875, we replace *_vol to *_voltage.
s/mainboard_set_regulator_vol/mainboard_set_regulator_voltage/
s/mainboard_get_regulator_vol/mainboard_get_regulator_voltage/
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iadf0408e8914d6e32915464f93979978c4634eaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
For MT8188, we need to enable and adjust VMCH and VMC to support SD
cards. Therefore, we add VPA and VSIM1 voltage adjustment APIs.
TEST=measure 3.0V in VMCH and VMC.
BUG=b:236331724
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I03938f9ef17a0bdd615bcbbfc7b59fa5acb8fbfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65874
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PMIF, SPI, SPMI and PMIC init code.
These PMIC settings are used by MediaTek internally. We can find these
registers in "MT6365_PMIC_Data_Sheet_V1.4.pdf" and
"MT6315 datasheet v1.3.pdf". The setting values are provided by MeidaTek
designers.
TEST=build pass
BUG=b:233720142
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I05a51894b130a59c28d957b64d6401c8bb9cee91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
We will use the same drivers for checking ulposc in MT8188, so we add a
new function pmif_ulposc_check() to common.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I40136eaeb2c08a97cd65bfb8a81f2f24739d4d51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65841
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPMI devices on MT8188 are different from previous SoCs, so we
move them to SoC folder.
We also move SoC-specific definitions to soc/pmif.h.
TEST=build pass
BUG=b:233720142
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I666c2a8222a2bd8cd460e2225a7ae48b001da9d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65757
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add usb host function support.
TEST=read usb data successfully.
BUG=b:236331724
Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com>
Change-Id: I3494b687b811466cb6b988164d3c5b6fecc3016a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65754
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Turn off L2C SRAM and reconfigure as L2 cache:
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
the L2C SRAM as L2 cache.
- Configure DMA buffer in DRAM:
Set DRAM DMA to be non-cacheable to load blob correctly.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I10f1cb8c62dfa78f59a4a5ea6087609668a0c2aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65753
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add power domain data for video and audio.
TEST=build pass
BUG=b:233720142
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Change-Id: Ic5fd496cbc6904b42eae28a62bf00a71f0ef508d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add PLL and clock init code, frequency meter and APIs for raising little
CPU/CCI frequency.
For usb clock setting, we also implement mt_pll_usb_clock_setting() to
enable usb clock for all ports.
TEST=build pass
BUG=b:233720142
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Change-Id: I03cb5a4c6fa5ddad7da6f955d0c6d0b3395503e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There are clock settings for usb in mt8195 and mt8188, so we add a new
function which is implemented in pll.c to do this.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I40b358b197541bc5281645879553340059829db3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65750
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add I2C controller drivers.
TEST=build pass
BUG=b:233720142
Signed-off-by: kewei.xu <kewei.xu@mediatek.corp-partner.google.com>
Change-Id: I7d19df3571e5588c7b20d9c7f26fa177b2221851
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add NOR-Flash drivers for flash read/write.
TEST=read nor flash data successfully.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I4e84fc023111b86f7f4984020d24811e3361ba03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65621
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FLASH_DUAL_READ is a common configuration for all MediaTek SoCs, so we
move it to common folder and select it in SoCs' Kconfig.
As suggested in CB:58837, we also rename FLASH_DUAL_READ to
FLASH_DUAL_IO_READ to reduce confusion.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: If267a332519412a7919c5b7817047fabe4a564c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65620
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add GPIO drivers to let other module control GPIOs.
TEST=build pass
BUG=b:233720142
Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com>
Change-Id: I0a2a5178949e9ad3e033ac332e0f1e8565e39b3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65619
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gpio_set_pull(), gpio_set_pull_pu_pd() and gpio_set_spec_pull_pupd()
can be reused for mt8192, mt8195 and mt8186, so move it to new file
"gpio_op.c" in common folder.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I81ab9b01ee20fccf3ef29c5902597b5045d3e36a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65641
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add timer drivers to Makefile.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I0e3e58c7118a18e738a5abba391db0be9cfd7bf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65588
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
timer_prepare() is the same for MT8195 and MT8186, so move it to
common folder.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I91a6f4ecc665a058cb7a0ba96c15b27d6dc97d13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65602
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add watchdog support for MT8188.
This implementation is based on chapter 3.10.10 in MT8188 Functional
Specification.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iaf56c78d89af53d0272583b463c050e69bbeb07a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65587
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There are more and more variables which are SoC-specific, so add
soc/wdt.h for each SoC and rename common/wdt.h to
common/wdt_common.h.
wdt_set_req() is almost the same for mt8192, mt8195 and mt8186, so
move it to a common file wdt_req.c.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7a334b3e7cd4f24a848dd31aca546dc7236d5fb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65636
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add new folder and basic drivers for Mediatek SoC 'MT8188'.
Difference of modules including in this patch between MT8188 and
existing SoCs:
Timer:
Similar to MT8195 and MT8186, MT8188 uses v2 timer.
EMI/PLL/SPI:
Different from existing SoCs.
The implementation is based on these files:
MT8188G_Application Processor Technical Brief_v0.4.pdf
MT8188G_Functional Specification v0.4.pdf
MT8188 Application Processor Registers-1.pdf
MT8188 Application Processor Registers-2.pdf
TEST=saw the coreboot uart log to bootblock
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3320f3d49a9b9ed781ceb812e4341e379db4ac20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65585
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
|
|
Change-Id: I668a39c603870329fd1528ddc5f3a42a379e1e76
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65267
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most of the src/soc/Kconfig files are only there for AMD and Intel to
load the main SoC Kconfig files before any common files. That can be
done in src/Kconfig instead. Moving the loads to the lower level allows
the removal of all but the Intel soc/Kconfig file, which can be removed
in a follow-on patch.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5061191fe23e0b7c745e90874bd7b390806bbcfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|