summaryrefslogtreecommitdiff
path: root/src/soc/mediatek
AgeCommit message (Collapse)Author
2022-03-16soc/mediatek: PCI: Remove global variableJianjun Wang
Remove global variable and use 'pcidev_path_on_root()' to get the base address of PCIe controller. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ia41c82a7aa5d6e9d936e242550851cef83afeae9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-16soc/mediatek: Add chip config for setting PCIe configJianjun Wang
Add chip config for setting PCIe config. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Icff83f2a9f76862065987a74cfcc7e511be80a20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15i2c: Add configurable I2C transfer timeoutJes Klinke
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US, which controls how long to wait for an I2C devices to produce/accept all the data bytes in a single transfer. (The device can delay transfer by stretching the clock of the ack bit.) The default value of this new setting is 500ms. Existing code had timeouts anywhere from tens of milliseconds to a full second beween various drivers. Drivers can still have their own shorter timeouts for setup/communication with the I2C host controller (as opposed to transactions with I2C devices on the bus.) In general, the timeout is not meant to be reached except in situations where there is already serious problem with the boot, and serves to make sure that some useful diagnostic output is produced on the console. Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f Signed-off-by: Jes B. Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-15soc/mediatek/mt8186: change pmic hwcid from warning to infoRex-BC Chen
The pmic hwcid dumping should not be a warning, so we modify it to info. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a930b69bd45d5f0d84c3d269ca721b287dbadea Reviewed-on: https://review.coreboot.org/c/coreboot/+/62775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15soc/mediatek/common: Add halt() after triggering wdt resetRex-BC Chen
It's more reasonable to halt when we trigger watchdog reset because the whole system should be reset afterwards. BUG=b:222217317 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I726ba1599841f63b37062f9ce2e04840e4f250bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/mediatek/mt8195: Enable PCIe supportJianjun Wang
Enable PCIe support for mt8195. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I314572955f1021abe9f2f0f4635670135ed08fff Reviewed-on: https://review.coreboot.org/c/coreboot/+/56793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/mediatek/mt8195: Add driver to configure PCIeJianjun Wang
Add a new function 'mtk_pcie_pre_init' to assert the PCIe reset at early stage to reduce the impact of 100ms delay. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: If6799c53b03a33be91157ea088d829beb4272976 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/mediatek/mt8186: Modify internal capid to 0xE0Rex-BC Chen
The mainboard may not be able to disable the internal cap, so we want to set 0xe0 for all boards to minimize the internal cap. And a mainboard implementation may choose XTAL with higher cload if the frequency requirement is met, and the total capacitance can be tuned externally for different boards. BUG=b:218439447 TEST=set capid to 0xe0. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2139e6b3456d7a50e3cdc8fc606e5f6ea3406044 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62563 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09soc/mediatek/mt8186: set pin drive strength to 8mA for NORRex-BC Chen
Set NOR pin drive to 8mA to comply with HW requirement. This implementation is according to chapter 5.1, 5.6 and 5.8 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=SPI SI tests for AP to NOR pass for both kingler and krabby. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5b6e37b0f7d4207ea35f11394d25ad1e096ac01a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-09soc/mediatek/mt8186: Add GPIO driving functionsGuodong Liu
Add GPIO driving functions to adjust pin driving. The value of drive strength is different for each SoC, so we define GPIO_DRV0 to GPIO_DRV7 which are corresponding to 2/4/6/8/10/12/14/16mA in MT8186. This implementation is according to chapter 5.1 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=build pass Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I6d987f28be98b515fa5c542222bda08bea1d5118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62471 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09commonlib/bsd: Remove cb_err_tJulius Werner
cb_err_t was meant to be used in place of `enum cb_err` in all situations, but the choice to use a typedef here seems to be controversial. We should not be arbitrarily using two different identifiers for the same thing across the codebase, so since there are no use cases for serializing enum cb_err at the moment (which would be the primary reason to typedef a fixed-width integer instead), remove cb_err_t again for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iaec36210d129db26d51f0a105d3de070c03b686b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/mediatek: Add PCIe supportJianjun Wang
Add PCIe support for MediaTek platform. Reference: - MT8195 Register Map V0.3-2, Chapter 3.18 PCIe controller (Page 1250) - linux/drivers/pci/controller/pcie-mediatek-gen3.c This code is based on MT8195 platform, but it should be common in each platform with the same PCIe IP in the future. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib9b6adaafa20aeee136372ec9564273f86776da0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-04soc/mediatek/mt8195: Update header version from 1.8.1 to 1.9.1Ryan Chuang
Move some structures to common folder (CB:61293), so we need to update header version. BUG=none TEST=dram calibration pass Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Id82cbef9cb10dba71489ea96f67c329de9aadc49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-04soc/mediatek/mt8192: Update header version from 1.7.1 to 1.8.1Ryan Chuang
Move some structures to common folder (CB:61293), so we need to update header version for this. BUG=none TEST=dram calibration pass Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I8cf12f4967af116eaef88c1f688567f1da9fa6e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02soc/mediatek/mt8186: Set RTC capid to 0xC0 to pass XTAL 26 MHz testRex-BC Chen
The XTAL 26MHz test failed on krabby, so we adjust RTC capid from default value 0x88 to 0xC0 for MT8186. We also add a new log message to show the capid value which is read from MT6366. This implementation is according to chapter 5.13 in MT8186 Functional Specification. BUG=b:218439447 TEST=set capid to 0xc0. TEST=XTAL 26MHz test passed. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I16ab46a5697d304e8001de231ffc9b7b7a2f9282 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02soc/mediatek: remove unused RTC_GPIO_USER_MASKRex-BC Chen
RTC_GPIO_USER_MASK is not used in any drivers, so we remove them. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0a15d5da142bb38feb595610d69566330e31fedd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-23src/mediatek: Refactor dramc_param to share more structuresXi Chen
The ddr_base_info struct, which stores basic DDR information, should be platform independent. Currently the struct is defined in each SoC's dramc_parah.h. To prevent code duplication, move it as well as other related structs and enums to a common header. Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I99772427f9b0755dc2c778b5f4150b2f8147bcc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-23soc/mediatek/mt8186: disable VSRAM_CORERex-BC Chen
VSRAM_CORE is not used on kingler/krabby, so we disable it. This implementation is according to chapter 3.7 in MT8186 Functional Specification. BUG=b:220071688 TEST=the rail steadily shows 0V in either S0, S3, and S5. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5256f6a2c0ca5a951dc79f564575b526a84463fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62253 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-17soc/mediatek/mt8195/include/soc/addressmap.h: Remove space before tabElyes Haouas
Spaces before tabs are not allowed. Change-Id: I2732c01fd87c56227d47a4c0104de8e227b0cc34 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62018 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-12soc/mediatek: Fix printing SPM versionYu-Ping Wu
Currently the SPM version string is stored at the end of the blob, possibly without a trailing '\0'. Therefore, we should be careful not to print characters beyond the blob size. BUG=b:211944565 TEST=emerge-corsola coreboot TEST=SPM version looked good in AP console BRANCH=asurada,cherry Change-Id: Icfeb686539dc20cf5b78de77c27bdbb137b5d624 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-02-11soc/mediatek/mt8186: Lower SPI NOR speed to 52MHizYu-Ping Wu
The current SPI NOR speed mainpll_d7_d2 (78MHz) is too fast for MT8186's HW design, which is capable of up to 52MHz. Therefore, lower the speed to univpll_d3_d8 (52MHz). BUG=b:218775654 TEST=emerge-corsola coreboot TEST=Boot time didn't increase significantly BRAHCH=none Change-Id: I5a03e41d4ce47d45b97a805b9b98877ef0dac7b7 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-02-11soc/mediatek: Only update required bits when triggering WDT resetRex-BC Chen
To prevent to modify original value of wdt_mode, we use setbits32 to update required bits. BUG=b:218420108 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I743c1af3583c18ec8500fc1eb89f31cdbce5317c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61729 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-10soc/mediatek/mt8173/dramc_pi_calibration_api.c: Remove duplicated "ERROR" in ↵Elyes HAOUAS
log message Change-Id: I846c21bd690372ec416fb3d3b3954bf181b0204c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-09soc/mediatek/mt8186: Fix issue of clearing watchdog statusRex-BC Chen
The implementation of clearing watchdog status is wrong in CB:58835. The value written to the 'wdt_mode' register should be 'wdt_mode | 0x22000000' instead of 'wdt_status | 0x22000000'. BUG=b:204229208 TEST=check watchdog status is cleared. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I8c5dbaab2ac43d3867037bc4160aa5af2d79284f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-09soc/mediatek/mt8186: Support DRAM fast calibration using blobXi Chen
For most MediaTek SoCs (MT8183, MT8192, MT8195) we rely on an external program (e.g., the "DRAM blob") to do the full DRAM calibration first, then store and and apply the generated parameters to the reference "fast DRAM calibration" in the vendor/mediatek folder for normal system boot. Starting with MT8186 the implementation of fast calibration may need to be changed, and a "DRAM blob" only path is introduced for devices that have to do both full and fast calibration using the external blob. TEST=fast calibration pass on kingler/krabby BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: If25a7dd6aa6261ecff79a1b4df8b1f2e53d896dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/61133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-07treewide: Remove "ERROR: "/"WARN: " prefixes from log messagesJulius Werner
Now that the console system itself will clearly differentiate loglevels, it is no longer necessary to explicitly add "ERROR: " in front of every BIOS_ERR message to help it stand out more (and allow automated tooling to grep for it). Removing all these extra .rodata characters should save us a nice little amount of binary size. This patch was created by running find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';' and doing some cursory review/cleanup on the result. Then doing the same thing for BIOS_WARN with 's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi' Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lance Zhao Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-01-29soc/mediatek/mt8186: Add register protect control for MT6366Rex-BC Chen
Some registers of PMIC init settings are protected, so we failed to set the correct value for init_setting. We disable protection before setting PMIC init setting and enable it afterward. BUG=b:216263707 TEST=PMIC setting value is set correctly. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I94d73d9c8a137444988e65c3709d29a3a4c03c5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61390 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-28src/{drivers,soc}: Fix some code indentsElyes HAOUAS
Change-Id: I55682de4a1bc74f170e2044de35b0d8d53ef51ff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-26soc/mediatek/mt8186: Use BIT() macro for arbiter enable bitRex-BC Chen
Replace (1 << x) with BIT(x) in pmic_wrap.h. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I463589f02065a228a8af74447b4586e5b54e0b3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61351 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-26soc/mediatek/mt8186: Update PWRAP arbiter enable bitRex-BC Chen
There is no wakeup source when we test function of suspend and resume. The root cause is that the monitor enable bit of PWRAP is not configured correctly. BUG=b:213255218, b:214978483 TEST=receive wakeup source from MT6366 successfully Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I324d18fa5d3cd745c35fcf0f207e1b444b5e898b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61330 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-25soc/mediatek: Save dramc_param header to mrc_cacheXi Chen
Fast-k flow may need to re-init header because mrc_cache doesn't store header. Storing header together with dparam data is better for data consistancy. TEST=fast calibration pass on Corsola BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I22982923dce06c9e770aa4f20f3dcd2f33685d84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-24soc/mediatek: Extract dramc_param_header to a common headerXi Chen
To be shared with different SOCs, move the dramc_param_header struct as well DRAMC_PARAM_FLAG and DRAMC_PARAM_CONFIG enums to a common header file dramc_param_common.h. TEST=fast calibration pass BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I087971799803e47e34c30063b2b0bd0cfc5795ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/61132 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-13soc/mediatek: Fix include guard naming for emi.hYu-Ping Wu
Fix the name of the include guard for soc/mediatek/common/include/soc/emi.h. BUG=none TEST=emerge-corsola coreboot BRANCH=none Change-Id: Iddac3467959545b7db141545aaa2a135536f44f1 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Xi Chen <xixi.chen@mediatek.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2022-01-10src/soc/mediatek: Remove unused <timer.h>Elyes HAOUAS
Change-Id: Ic87e41a9b317cc7d0b36ece5ffd1d32068e6a33a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-07soc/mediatek/mt8186: fix incorrect devapc settingsRunyang Chen
We need to protect debugsys for firmware image without serial console. Original settings for protecting debugsys is wrong which will cause some hardware modules to fail to set their registers correctly. We move the setting from MM_AO_APC to INFRA_AO_APC because the setting of debugsys is defined in INFRA_AO_APC and set the debugsys index to correct value of 94. BUG=b:213125558 TEST=all modules work normally using image without serial console. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: Ibce626386ac1f8de42f8717c4ad9ba403640b3ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/60833 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-07soc/mediatek/mt8186: initialize DFDRex-BC Chen
DFD (Design for Debug) is a debugging tool, which scans flip-flops and dumps to internal RAM on the WDT reset. After system reboots, those values can be shown for debugging using MTK internal parsing tools. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7b711755022b5d9767019611151fea65e71edc66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60828 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-06soc/mediatek/mt8186: Increase CBFS_MCACHE size to 8KiBRex-BC Chen
The current CBFS mcache size (roughly 7KiB) is insufficient for mt8186, so we need to increase it by 1KiB (and decrease the stack by 1KiB). Error logs: CBFS ERROR: mcache overflow, should increase CBFS_MCACHE size! CBFS: mcache @0x0010e004 built for 63 files, used 0xde4 of 0xdfc bytes BUG=b:202871018 TEST=no cbfs error logs. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I1e627ede3774665575006f752f89101e3c5bde9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/60529 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-05src/soc/mediatek: Remove unused <delay.h>Elyes HAOUAS
Change-Id: I414ad3824819f441f316567795999ed9539cba7b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-05soc/mediatek: Remove unused <string.h>Elyes HAOUAS
Change-Id: I8f88541dce457e978a2cbea036d4f6eae387963f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-01src: Drop duplicated includesElyes HAOUAS
<types.h> already provides <commonlib/bsd/cb_err.h>, <limits.h>, <stdbool.h>, <stdint.h> and <stddef.h> headers. Change-Id: I700b3f0e864ecce3f8b3b66f3bf6c8f1040acee1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-01soc/mediatek/mt8186: Add support for regulator VRF12/VCN33Rex-BC Chen
To provide power to PS8640, the eDP bridge IC on krabby, add control of VRF12 and VCN33 to set voltage from MT6366. TEST=measure 1.2V from VRF12 and 3.3V from VCN33. BUG=b:210806060 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I55a9ca16e1e335e9355d0a1b30c278a9969db197 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-29soc/mediatek/mt8186: Add DSI driverRex-BC Chen
Enable DSI for display. BUG=b:209930699 TEST=Firmware display looked good Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Idb6bd3a1d32ac96a9d1a2553b8a70db4e59eec16 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-29soc/mediatek/mt8186: Add DDP driverRex-BC Chen
Add DDP (display controller) driver that supports main path to eDP panel. The output goes to display interface DSI. BUG=b:209930699 TEST=saw firmware display Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic4fb40832b5dc7a815b37266259b2e3281ee79f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-29soc/mediatek/mt8186: Add DRAM full calibration supportRyan Chuang
Use common SoC drivers for DRAM calibration support. TEST=build pass. BUG=b:202871018 Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Ie1a1e04da0cce9aaf86588a94c64d2242e7cb4b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-29soc/mediatek/mt8186: Add header files to support DRAM calibrationRyan Chuang
Remove emi.h because emi.h is defined in common/include/soc. Add dramc_param.h and dramc_soc.h to prepare for implementation of DRAM full calibration. TEST=build pass. BUG=b:202871018 Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: If8662ed43088ea5aa1fe6cb5b2c4bda2338c4387 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60385 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-28soc/mediatek: Prevent passing NULL MIPI commandsYu-Ping Wu
Previously (before CB:56965 [1]) mtk_dsi_send_init_command() would ignore NULL initialization commands passed to it. However, in the current code mipi_panel_parse_init_commands() doesn't check that (see CB:57150 [2]), so we should check it on the caller side from mtk_dsi_init(). [1] b2a1480191 device: Move MIPI panel library from mainboard/google/kukui into common [2] 4757a7ea33 mipi: Make panel init callback work directly on DSI transaction types BUG=b:202871018, b:209930699 TEST=emerge-corsola coreboot BRANCH=none Change-Id: I8196e3b135da273325e2e121523abb7fb230a49c Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2021-12-28soc/mediatek/mt8186: Enable VRF12 software control for MT6366Rex-BC Chen
PS8640 is a low power MIPI-to-eDP video format converter. VRF12 does not provide power to PS8640 on krabby. In original patch, VRF12 is not used, and is set to hardware control for low power. We change the setting to remove hardware control. Therefore, if we want to control VRF12 by software, we can control it directly. BUG=b:210806060 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I87d6a94b6fb343590d563ac1554ff87b11c01549 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-28soc/mediatek/mt8186: Add devapc basic driversRunyang Chen
Add basic devapc (device access permission control) drivers. DAPC driver is used to set up bus fabric security and data protection among hardwares. DAPC driver groups the master hardwares into different domains and gives secure and non-secure property. The slave hardware can configure different access permissions for different domains via DAPC driver. 1. Initialize devapc. 2. Set master domain and secure side band. 3. Set default permission. BUG=b:202871018 TEST=build pass Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I5dad4f342eef3136c24c38259ad176dc86b7c0d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-28soc/mediatek/mt8195: Move some definations of devapc to common folderRex-BC Chen
Move some definations of devapc for sharing between MT8195 and MT8186. BUG=b:202871018 TEST=emerge-cherry coreboot; emerge-corsola coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia1769ede790f106a320ead9be7e2a596fe96930a Reviewed-on: https://review.coreboot.org/c/coreboot/+/60394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-28soc/mediatek/mt8186: Adjust usage of SRAM L2CRex-BC Chen
We use parts of SRAM_L2C as the memory of PRERAM_CBMEM_CONSOLE before DRAM calibration. When we check cbmem, we found the content of this memory is unreadable. The L3 (can be used as SRAM_L2C) is 1MB in total. However the BootROM has configured only half of L2/L3 cache as SRAM. Therefore, decrease the size of each SRAM region to fit into the first half of the cache. BUG=b:207725851 TEST=Bootblock log looked good in `cbmem -c` Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I6041767a1ac0a48ecdda29a0c35d90acf6ad0ef2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-26soc/medaitek/mt8195: adjust USB phy shift valueRex-BC Chen
There is a design issue of bit shift which will drop a bit for USB3 phy on MT8195. Therefore, we add this patch to set USB phy registers from value of efuse. BUG=b:211528577 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Signed-off-by: Tianping Fang <tianping.fang@mediatek.corp-partner.google.com> Tested-by: Tianping Fang <tianping.fang@mediatek.corp-partner.google.com> Change-Id: I43cb6c1c795dd181d6eba7f3bc52e4eb1a602081 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60312 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-15mb/google/corsola: move USB3 HUB reset funtion to bootblockRex-BC Chen
To save the S3 power, USB3_HUB_RST_L is externally pulled up to a weak resistor, so we have to reset the hub as early as possible. Otherwise the USB3 hub may be not usable. Therefore, move USB3 HUB reset function to bootblock. BUG=b:210065282 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I92feb2316302fda32478b24c014bcd380d0ac55d Reviewed-on: https://review.coreboot.org/c/coreboot/+/60088 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-14soc/mediatek/mt8186: add tracker dumpRex-BC Chen
Tracker is a debugging tool, and MT8186 only supports AP tracker. When bus timeout occurs, the system reboots and latches some values which could be used for debugging. This function will be triggered only when it encounters the bug hanging issue. BUG=b:202871018 TEST=range of registers are dumped as expected. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie023de2a6f7421a16b2516baa0bf0bf6fff589e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-14soc/mediatek: add support for tracker version oneRex-BC Chen
There are two versions for tracker system: Version 1 for MT8186, and version 2 for MT8192 and MT8195. Reference document: MT8169_bus_dbg_tracker_cfg_reg.xls from MediaTek internal. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Idb146974da118b1cf5a349370bf7b2fa13f1aba8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59989 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-09soc/mediatek/mt8186: Enable ARM Trusted Firmware integrationRex-BC Chen
Enable configuration to build with MT8186 arm-trusted-firmware drivers. TEST=build pass BUG=b:202871018 Cq-Depend: chromium:3189573 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ib23b112a0bf3d056b932a87b86aaff79508ef50c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08soc/mediatek/mt8186: Correct SPI_HZ for PLLRex-BC Chen
The SPI speed is 218.4MHz, so correct the value of SPI_HZ. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I6e8ba10a851e1507405cdd41939a176462734487 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08soc/mediatek/mt8186: revise SPI NOR GPIO selectionRex-BC Chen
The setting of SPI NOR GPIOs should be: CS: pull up. CLK/IO0/IO1: pull down. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ideacb797a1dc9999ab6ba00cf33adbbbc24213dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-06soc/mediatek/mt8195: complete devapc settingsNina Wu
In previous patch (CB:56764), only basic settings were added. Now complete devapc settings on MT8195. 1. Update permission setting 2. Updtate master domain setting: - domain 1: PCIE0, PCIE1 - domain 2: SPM, SSPM, CPU_EB 3. Set domain remap - MMSYS (4-bit to 2-bit) - TINYSYS (4-bit to 3-bit) - TINYSYS (3-bit to 4-bit) - TINYSYS to EMI (3-bit to 4-bit) - INFRA2 (3-bit to 4-bit) 4. Set SCP domain and ADSP domain - domain 3: SCP - domain 4: ADSP BUG=b:204347737 TEST=sanity test pass Change-Id: I1846d56d2dc362de64b28e0ed9a0681f186af7ee Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59746 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-29soc/mediatek: move bustracker_init before watchdog resets againRex-BC Chen
The checking register will be cleared after EC resets, so we move bustracker dump from ramstage to bootblock, before triggering EC reset. TEST=bustracker shows status before watchdog resets BUG=b:207743045 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic18dc9742cd9f657a035a374e28371dfc5f04ac3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-29soc/mediatek: Flush cache before triggering EC resetRex-BC Chen
There will be no log in cbmem if we trigger ec reset on bootblock stage. Therefore, call dcache_clean_all() before triggering ec reset to flush cache to store logs on cbmem. BUG=b:207743045 TEST=show logs on cbmem Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I1bd900beb4cc84f7121c5fb66907fa73b62517fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/59683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-29soc/medaitek: add prompt string to config MTK_DFDRex-BC Chen
Add prompt string to allow selecting MTK_DFD manually. TEST=Select and enable MTK_DFD then successfully built firmware images. BUG=b:207450135 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ied711321efa592cf1bf7b318fe4d0aa155c15c70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek/i2c: Return negative values on errorYu-Ping Wu
Following coreboot's convention, return negative error codes from platform_i2c_transfer(). BUG=none TEST=emerge-asurada coreboot BRANCH=none Change-Id: I955b9aae11e20d75fac414d15714330e364dad2f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-26soc/medaitek/mt8186: fix wrong condition of RTC driversRex-BC Chen
We need to report error while rtc_xosc_write() returns false. TEST=error logs for RTC disappear BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5fdf4de0383ef373dd45e8d8741aa861c9c4bdc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: Raise little CPU frequencyRex-BC Chen
Raise little CPU to 2GHz at romstage. TEST=check little core cpu frequency is 2GHz BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If4c983d15beb2b588230f3db7416cb767b29978d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: Add VPROC12/VSRAM_PROC12 to regulator interfaceRex-BC Chen
Add VPROC12/VSRAM_PROC12 to adjust power for raising little CPU frequency. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I59b4627220022a51a116716036a8ba0048039508 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek/mt8186: fix variable typeRex-BC Chen
The types of pwrap_read_field()'s return value and pwrap_write_field()'s `val` argument are u16, so correct the usage in MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie05ab65ecd9b8ea1379ef74393285c4f5d2db8a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek/mt8186: Add support for regulator VPROC12/VSRAM_PROC12Rex-BC Chen
To raise little CPU frequency, add support for VPROC12 and VSRAM_PROC12 of MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: I718fdf36d34969a6e21ddc8c1ec6f525e0e20904 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek: log watchdog statusRex-BC Chen
Reveal watchdog status value on bootblock stage. BUG=b:207646327 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2c5ad222a41085616565dd5c10b0e967bb64ec63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Add RTC and clkbuf driversYuchen Huang
Add support for RTC and clkbuf. TEST=boot to kernel and check log ok BUG=b:202871018 Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Change-Id: Ia02a74f685feb2466c113a77cbfa3a7d8fedb595 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Add mtcmos init supportChun-Jie Chen
Add mtcmos to support display and audio. TEST=build pass BUG=b:202871018 Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Change-Id: Ib9d41d47f235376f524c3ff78f1fcc069cbc60cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: add SPM loaderRex-BC Chen
This patch adds support for loading SPM firmware from CBFS to SPM SRAM. SPM needs its own firmware to enable SPM suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. TEST=program counter of SPM is correct value(0x250) after booting up BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia13e5a2ecf09561856b7e958128cd2f045c39f33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59341 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-17soc/mediatek/mt8186: initialize SSPMRex-BC Chen
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I92eb501a1e48dd02d2f94ff392933261e6a42391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek: move MSDC drivers to soc folderRex-BC Chen
Setting of MSDC is defined by soc, so we move them to soc folder. TEST=emerge-cherry coreboot; emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I84ad8a4cde120c97024870ebf750d44b36c2284d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Enable DCMEdward-JW Yang
DCM (dynamic clock management) can dynamically slow down or gate clocks during CPU or bus idle. Enable DCM settings on the MT8186 platform. TEST=build pass and check register ok BUG=b:202871018 Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com> Change-Id: I82add5ae629d59f7d6773e26ac9cba9d54ab8caf Reviewed-on: https://review.coreboot.org/c/coreboot/+/59338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Add I2C driver supportHousong Zhang
Add I2C controller drivers. TEST=build pass BUG=b:202871018 Signed-off-by: Housong Zhang <housong.zhang@mediatek.corp-partner.google.com> Change-Id: Ia3800e3a30b0796a64213d3b1ab688580c6ddbca Reviewed-on: https://review.coreboot.org/c/coreboot/+/59296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek: move i2c function to common folderRex-BC Chen
Move mtk_i2c_max_step_cnt, mtk_i2c_check_ac_timing, mtk_i2c_speed_init and mtk_i2c_calculate_speed to common folder to share with MT8186. TEST=test on tomato ok TEST=emerge-asurada coreboot BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a702741c763bf9261cea90d0d71c08b6e28c261 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16soc/mediatek/mt8186: add early initialization for eMMCRex-BC Chen
Some eMMCs need 80+ms for CMD1 to complete. And the payload may need to access eMMC in the very early stage (for example, depthcharge needs it 20ms after started) so we have to start initialization in coreboot. TEST=boot kernel from eMMC ok BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I3bc06b1fc506b1d6f54f7f456117d22477a87e29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16soc/mediatek/mt8186: Configure eMMC and SD CardWenbin Mei
The Corsola reference design has both eMMC and SD Card interfaces so we have to configure both in RAM stage. TEST=build pass BUG=b:202871018 Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I2f26a8a11edd29a80a7195e3a324151d66ecb293 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16soc/mediatek/mt8195: Add message string when using _Static_assertFlora Fu
The _Static_assert without message string is only available since C++17. Add the message to avoid build fail in the macro. BUG=b:203145462 BRANCH=cherry TEST=build pass and boot pass Signed-off-by: Flora Fu <flora.fu@mediatek.com> Change-Id: Ib146ffafc21b9dbb9d383c9343a9ec1d7c478faf Reviewed-on: https://review.coreboot.org/c/coreboot/+/59298 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-15mb/google/corsola: Add VMCH and VMC for regulator interfaceRex-BC Chen
Add VMCH and VMC for providing power of SDCard. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I50fc87415086eb22ff35d157dba38cfd7594cc40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek/mt8186: Add support for regulator VMCH and VMCRex-BC Chen
Add support for VMCH and VMC of MT6366. TEST=measure voltage 3.3V for VMCH and VMC BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Id8d98b6d827abd4713ee5c216941a9621422c7eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/59254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek/mt8186: Add AUXADC driver supportGuodong Liu
Add AUXADC controller driver code. TEST=build pass BUG=b:202871018 Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I9fb7fd4903d67a2804c31ff404bc0486983c742f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek/mt8186: add GIC pre-initialization functionRex-BC Chen
GIC (generic interrupt controller) defines architectural requirements for handling all interrupt sources and common interrupt controller programming interface. GIC needs to be pre-initialized on MT8186, so we add this initialize function. TEST=build pass BUG=b:202871018 Change-Id: I6bf439d0d9e1ca7130a69b9006b957afca8b133c Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59252 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-15soc/mediatek/mt8186: add USB supportRex-BC Chen
1. Enable and setup USB drivers. 2. Pull up to a weak resistor for USB3_HUB_RST_L and we reset the hub via GPIO149. TEST=boot kernel from USB ok BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ifcc11d51b0c1e495477957111e6021ef8275f629 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15mb/google/corsola: Implement regulator interfaceRex-BC Chen
Use regulator interface to use regulator more easily. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ied43cba51036c62a120df2afffeb63b5d73f012b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek/mt8186: add SPM register definitionsRex-BC Chen
Add SPM register definitions so that other drivers can use them. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iec2b493e464be9d617226cc8a9875ee3ddb759de Reviewed-on: https://review.coreboot.org/c/coreboot/+/59248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek/mt8186: Enable mmu operation for L2C SRAM and DMARex-BC Chen
1. Turn off L2C SRAM and reconfigure as L2 cache Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready. After DRAM is ready, we should invoke disable_l2c_sram to reconfigure the L2C SRAM as L2 cache. 2. Configure DMA buffer in DRAM Set DRAM DMA to be non-cacheable to load blob correctly. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If56d29cdd7d9dfaed05e129754aa1f887a581482 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek: move functions of mmu operation to common folderRex-BC Chen
Move mtk_soc_disable_l2c_sram and mtk_soc_after_dram to common folder which are the same between MT8192, MT8195 and MT8186. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I8f49214b932a8d28ed2ca0d764dc745fa8ad330d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek/mt8186: Add support for PMIC MT6366James Lo
Add basic support for VCORE/VDRAM1/VDDQ of MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: I22e30421560a32f4a9e15899e8150376b1414494 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15soc/mediatek: change help text of FLASH_DUAL_READRex-BC Chen
Change help text to "dual IO read mode" to reduce noun confusion. Suggestion from this comment: https://review.coreboot.org/c/coreboot/+/58837/comment/40a98af1_dce6bb2b/ Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I54b81cdeba3b693451f66e003fb470c9f8c19ad9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-12soc/mediatek/mt8195: Add APU device apc driverFlora Fu
Add APU device apc driver and set up permissions. APU has its own device apc for control access by domains. For Domain 0, the access to the following slaves are restricted to security read and write: apusys_ao-2, apusys_ao-4, apusys_ao-5, apu_sctrl_reviser, apu_iommu0_r1 apu_iommu0_r2, apu_iommu0_r3, apu_iommu0_r4 apu_iommu1_r1, apu_iommu1_r2, apu_iommu1_r3,apu_iommu1_r4 For VPU, D0/D5 are set as no protection, other domains are forbidden. For other slaves, the D0 is no protection, other domains are forbidden. BUG=b:203145462 BRANCH=cherry TEST=boot cherry, check dump log and test permissions Signed-off-by: Flora Fu <flora.fu@mediatek.com> Change-Id: If92d3b02ac4966332315b85d68e0f48c6a9fce85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-11soc/mediatek/mt8195: fix apusys coding defectsFlora Fu
Use size_t for count variables. Reduce debug log level and fix typo. Fix commit: https://review.coreboot.org/c/coreboot/+/58794 BUG=b:203145462 BRANCH=cherry TEST=boot cherry correctly Signed-off-by: Flora Fu <flora.fu@mediatek.com> Change-Id: Ic03f71b7a9038edb5877ebd9b6aed5e9bd63c918 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59038 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-08soc/mediatek/mt8186: Add SPI driver supportRuwen Liu
Add SPI controller drivers. TEST=build pass BUG=b:202871018 Signed-off-by: Ruwen Liu <ot_ruwen.liu@mediatek.com> Change-Id: I59a885c4fa31b6e2921698eaa3b97dbdc3144946 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-05soc/mediatek/mt8186: Enable and initialize EINTRex-BC Chen
EINT event mask register is used to mask EINT wakeup source. All wakeup sources are masked by default. Since most MediaTek SoCs do not have this design, we can't modify the kernel EINT upstream driver to solve the issue 'Can't wake using power button (cros_ec) or touchpad'. So we add a driver here to unmask all wakeup sources. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I84946c2c74dd233419cb94f013a42c734363baf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-05soc/mediatek/mt8186: Add timer supportRex-BC Chen
Add timer drivers to use timer function. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I6524e4dec4cbe7f7eb75a7940c329416559a03c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-05soc/mediatek/mt8186: Add PLL and clock init supportChun-Jie Chen
Add PLL and clock init code, frequency meter and APIs for raising little CPU/CCI frequency. TEST=build pass BUG=b:202871018 Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Change-Id: Id46d0708e7ba0c1a4043a5dce33ef69421cb59c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-05soc/mediatek/mt8186: add NOR-Flash GPIO setting in soc folderRex-BC Chen
The NOR-Flash can be configured on SPI0 or TDM-RX GPIOs so we have to provide an init function in SoC for the mainboard to select right configuration. TEST=boot to romstage BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I285ec64ace8b72a48ef1d481d366bd67cb9b0337 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-04soc/mediatek/mt8186: Add NOR-Flash supportRex-BC Chen
Add NOR-Flash drivers to pass verification of flash at verstage. TEST=boot to romstage BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If51d765e1fd4895f97898710ec6fa1374e1048fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58837 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-03soc/mediatek/mt8186: Add GPIO driversGuodong Liu
Add GPIO drivers to let other module control GPIOs. TEST=build pass BUG=b:202871018 Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: Ice342ab94397db8bc0fbbeb8fb5ee7e19de871ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/58836 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-03soc/mediatek/mt8186: Initialize watchdogRex-BC Chen
MT8186 requires writing speical value to mode register to clear status register. The flow of clear status is different from other platforms, so we override mtk_wdt_clr_status() for MT8186. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I290b69573a8e58db76814e16b5c17c23413f1108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58835 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 02:39:10 +0000