Age | Commit message (Collapse) | Author |
|
dapc_init flow is the same on MT8186, MT8188 and MT8195. So move this
function to common/devapc.c
TEST=emerge-corsola coreboot; emerge-cherry coreboot;
emerge-geralt coreboot
TEST=devapc log is shown as expected and the system boots to kernel
Change-Id: I979c3a3721a82d40c9e2db7fbe62e14a9bbd53d8
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71137
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There are eDP and MIPI panels supported in geralt. We put the panels'
specified functions - `power_on()` and `configure_panel_backlight()` in
panel_geralt.c. Also provide the common interface `get_active_panel()`
in panel.c to generalize the display initialization. Since each board
may support a different set of MIPI panels, we put the MIPI data in a
separate file panel_geralt.c.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: Ie928759e020a916f29f0364201a3cf202dc512c3
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
We need to add DSI and MIPI_TX settings to support MIPI panel.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: Ib430939b4fa2d517d006b4c23d399754ef4583ff
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70184
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For geralt project, we also support MIPI panel as our firmware display.
So add this patch to configure ddp to choose eDP display or MIPI panel
display.
BUG=b:244208960
TEST=test firmware display pass for both eDP and MIPI panel on MT8188
EVB.
Change-Id: I06f38b1889811274588c26e9284da4d502acf38b
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70181
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Issue:
Device can't wake up using power key.
Root cause and solution:
EINT event mask register is used to mask EINT wakeup sources. All
wakeup sources are masked by default. So we add a driver here to unmask
all wakeup sources.
BUG=none
TEST=wake the device up by power key on MT8188 EVB.
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Change-Id: I94b20909b0b8d77f75c41bc745f892baded7a54b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69688
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Without RTC, the timestamps in the eventlog are currently all
'2000-00-00 00:00:00'. Enable RTC to get the correct timestamps.
localhost ~ # head /var/log/eventlog.txt
0 | 2022-10-15 22:59:38 | Log area cleared | 4088
1 | 2022-10-15 22:59:38 | Memory Cache Update | Normal | Success
2 | 2022-10-15 22:59:45 | System boot | 0
3 | 2022-10-15 22:59:46 | Firmware vboot info | boot_mode=Developer |
fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown
localhost ~ #
localhost ~ # date
Sun Oct 16 01:42:59 PDT 2022
localhost ~ #
BUG=b:233720142
TEST=check the timestamp field in /var/log/eventlog.txt
Change-Id: Iddad102dc8d60de01a691d330deb8247e99c616a
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69432
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The input-gating is an experimental feature (but unfortunately default
enabled) and would lead to crash on MT8188, so we have to disable it
in the firmware stage.
BUG=b:233720142
TEST=CPUfreq in kernel test pass.
Change-Id: Ifd68fe9362587955cdb8598c4cc5c2d0eefe53ca
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69089
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When enabling cpufreq-hw driver, it is required for MCUPM to access
secure registers. Therefore, we enable side-band to allow MCUPM to
access the secure registers.
BUG=b:236331463
TEST=It works well after boot to login shell.
Change-Id: I67b08c38a31a7eae1bc59543a5148a78b61456d6
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69088
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
|
|
This reverts commit a8172c329fe309f3b5b409c1a59a227186400dd4.
In the aforementioned patch, we allowed MCUPM to access secure
registers and set the domain to DOMAIN_2.
Additional attribute settings are also required when a hardware is
set to a specific domain. Otherwise, there would be violation between
hardware. Since MT8188 is in bring-up stage, we simply enable access
register permission for the DOMAIN_0 by default. So remove the wrong
setting for MCUPM, SCP and SSPM.
We will complete DEVAPC setting when the settings are confirmed.
Change-Id: I5d9809f6e84b8d10bc2e6f2ea5a442e676ad3bf9
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69139
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic875708697f07b6dae09d27dbd67eb8b960749f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
For MT8188, the SPDX identifiers are all GPL-2.0-only OR MIT, so
replace "GPL-2.0-only" with "GPL-2.0-only OR MIT".
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I5ef6c488b7ef937f6e298670ea75d306b9fe7491
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68759
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- For display, only vdosys0_pwr_con and edp_tx_pwr_con settings are
required.
- For audio, it requires powering on adsp_ao_pwr_con,
adsp_infra_pwr_con and audio_pwr_con.
- Add new power domain data `ext_buck_iso_bits` for buck isolation
control.
BUG=b:244208960
TEST=access display registers successfully.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7f00bda0cc5c7f8dea55a564a0ff10ae601115b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
MT8188 supports eDP as internal display interface.
BUG=b:244208960
TEST=emerge-geralt coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6441a36557b097e041bc081b907eb60b56c9fbe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add DDP (display data path) driver that supports overlay, read/write
DMA, etc. The output goes to display interface DP_INTF0 directly.
Add ddp gclast and output_clamp settings to MT8188 to support
multi-layer display.
BUG=b:244208960
TEST=emerge-geralt coreboot.
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Change-Id: Icc0a878c609818fedd298c141bb39469fd2f6388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68487
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPM register at offset 0x0 is often named as poweron_config_set in
previous MediaTek SoCs. To use common driver, we rename it from
poweron_config_en to poweron_config_set.
BUG=none
TEST=emerge-geralt coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I31dbf09d668844d3ee74790c657a2ab076e8cdf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68486
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For consistency with the PLL function naming:
- Rename edp_mux_set_sel() to mt_pll_edp_mux_set_sel().
- Rename mux_set_sel() to pll_mux_set_sel().
BUG=none
TEST=build pass.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifc7b14bf0db5a5461037e2fbf41756d1542ca945
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68622
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPMI interface configuration is SoC-dependent.
- MT8192 and MT8195 are the same.
- MT8186 does not need to implement this.
- MT8188 is different from MT8195, and we will submit another patch to
fix this.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I4cf508a0690995a7fe7b7316269d07cb7a799191
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68619
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes AP hanging issue caused by the handshaking between
MCUPM and CPUfreq driver.
CPUfreq hardware failed to read MCUPM registers due to DEVAPC
permission. Therefore, update the DEVAPC settings to fix this issue.
BUG=none
TEST=CPUfreq in kernel test pass.
Change-Id: I6b30b01fc0be052182599709cbcc9139e6d09742
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67724
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some PLLs are not used in firmware, so we should keep them as hardware
default values. If their modules want to set them, the corresponding
drivers should set them in the kernel stage.
BUG=b:233720142
TEST=build pass.
Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com>
Change-Id: I9bee18005ffed7fc1785c7fd3c0370c8293064ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67547
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:233720142
TEST=build pass.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Change-Id: I567d1ded1c3b5e36a25026cec697d43d92d5524c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67546
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
vpp_sel and ethdr_sel are vdosys clock source select mux.
Steps to change to support 4K source:
1. Change vpp_sel source to mainpll_d6 to run at 416MHz.
2. Change ethdr_sel source to univpll_d6 to run at 416MHz.
BUG=b:233720142
TEST=build pass.
Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com>
Change-Id: I24f133b9b383fd019983cb29a213b47717148e97
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67545
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The observed CPU big core frequency is double compared with the current
PLL setting. Therefore fix the wrong setting for PLL register
APMIXED_ARMPLL_BL.
Moreover, we also fix some wrong settings for other PLLs.
TEST=CPU frequency of big core CPU is correct and bootup correctly.
BUG=b:244215537
Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com>
Change-Id: I9126f439d7a5136b2fb8d66f103ef427a0b08a99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67543
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable configuration to build with MT8186 arm-trusted-firmware drivers.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id16405c84f6e0a2e21f95cc45babf85bd980b43e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67356
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pass the reset gpio parameter to BL31 to support SoC reset.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifdfbd6bd82f64b084f6349cb617443053c89a3f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67357
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some of the pll settings are incorrect, which cause problems in GPU
after booting into kernel.
- MFGPLL opp_ck_en bit isn't located at MFGPLL_CON1, so we need to fix
it to enable MFGPLL properly.
- Switch SPMI clock muxes to 260M to avoid kernel hang while probing
SPMI kernel driver.
TEST=GPU bringup correctly.
BUG=b:233720142
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Change-Id: I971109a5f72e3307899daaf5a5f26022124b559b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67355
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add support for loading SPM firmware from CBFS to SPM SRAM. SPM needs
its own firmware to enable SPM suspend/resume function which turns off
several resources such as DRAM/mainpll/26M clk when linux system
suspend.
SPM is an essential component on MediaTek SoC, so we initialize PPM
in soc_init(). For MT8188, SPM will handshake with DPM to do
initialization, so we need to call spm_init() after dpm_init().
This SPM flow adds 33ms to the boot time.
firmware log:
mtk_init_mcu: Loaded (and reset) spm_firmware.bin in 25 msecs
SPM: spm_init done in 33 msecs, spm pc = 0x400
TEST=spm pc is 0x400 which is in idle state.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I1a1f49383e0ceadc259a18272fc1c277b65406ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The unit of current_clk in pmif_ulposc_check() should be MHz. We use
pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz.
Without this modification, the judgement in pmif_ulposc_check() is
alway wrong due to the wrong unit.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add basic DEVAPC (device access permission control) driver.
DEVAPC driver is used to set up bus fabric security and data protection
among hardwares. DEVAPC driver groups the master hardwares into
different domains and gives secure and non-secure property. The slave
hardware can configure different access permissions for different
domains via DEVAPC driver.
1. Initialize DEVAPC.
2. Set master domain and secure side band.
3. Set default permission.
TEST=check logs of DEVAPC ok.
BUG=b:236331724
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Change-Id: Iad3569bc6f8ba032d478934ba839dc4b5387bafc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add initialization of DPM drvier for DRAM low power mode.
DPM is an essential component on MediaTek SoC, so we initialize DPM
in soc_init().
This DPM flow adds 22ms to the boot time.
coreboot logs:
CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110
mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes)
CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140
mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes)
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: Ia68aca1d1e8729739246157904727123e5d001e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66968
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DPM is a hardware module for DRAM power management, which is used for
DRAM low power mode.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I872396fe2c5accd92ba5c14b124125bd58257771
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66967
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8188. Therefore,
we select this configuration to enable it.
TEST=build pass
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I14f3d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66280
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define fields of sdram_params and enable MEDIATEK_BLOB_FAST_INIT to
run fast calibration for MT8188 using blob.
DRAM fast calibration logs:
DRAM-K: Fast calibration passed in 19530 msecs
dram size (romstage): 0x200000000
TEST=Fast calibration pass.
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2468d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
- Use common SoC drivers for DRAM calibration support.
- Remove emi.h because sdram_size() is already declared in
common/include/soc/emi.h.
- Add dramc_param.h and dramc_soc.h to prepare for implementation of
DRAM full calibration.
TEST=build pass
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2f88d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
DFD (Design for Debug) is a debugging tool, which scans flip-flops
and dumps to internal RAM on the WDT reset. After system reboots,
those values can be shown for debugging using MTK internal parsing
tools.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6d19dc6f4e47ed69ba2ea87c79984020a413aee9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66586
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie9d7b361dda8c5850bc0682c255bc20f9e26675c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66668
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tracker is a debugging tool. When bus timeout occurs, the system will
reboot and latch some values of tracker registers which could be used
for debugging.
This function will be triggered only when it encounters the bus
hanging issue.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I78f676c08ea44e9bb10bd99bbfed70e3e8ece993
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66584
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This replaces 'SPDX-License-Identifier' tags in all the files under
soc/mediatek/mt8188 for better code re-use in other open source
software stack.
These files were originally from MediaTek and follow coreboot's main
license: "GPL-2.0-only". Now MediaTek replaces these files to
"GPL-2.0-only OR MIT" license.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Change-Id: If61e8b252400e8e5ecd185b6806b1ca279065f15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66628
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The gpios and the tick delay register are different between MT8188
and previous MediaTek SoCs, so we need to add this patch to support
SPI.
TEST=build pass
BUG=b:236331724
Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com>
Change-Id: I6065b9d285dfd36c191f274f500fdb694920276e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66185
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass.
BUG=b:233720142
Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com>
Change-Id: Ic300b70a38ac204b098ca9ab15cf7045b66fd76d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66182
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add RTC header file for SoC-specific settings. Add RTC support in
romstage.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com>
Change-Id: I38115ce0c9a4e1c1b2b7c8e6d40f47e99f7f86b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66181
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=get voltage as 340mV for channel 0 in MTK EVB.
BUG=b:233720142
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: Idd1edcce6cb62fcf6991bb9342c409150989c5ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
SSPM is "Secure System Power Manager" that provides power control in
secure domain. The initialization flow is to load SSPM firmware to
its SRAM space and then enable.
It takes 21 ms to load sspm.bin.
coreboot logs:
CBFS: Found 'sspm.bin' @0x21680 size 0xa815 in mcache @0xffffeac4
mtk_init_mcu: Loaded (and reset) sspm.bin in 21 msecs (137348 bytes)
TEST=we can see the sspm logs.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ib6443b64734048c1d71eeac650f36d7c4ac709cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Load MCUPM firmware and boot up MCUPM in ramstage.
It takes 41 ms to load mcupm.bin.
coreboot logs:
CBFS: Found 'mcupm.bin' @0x12580 size 0xf0c6 in mcache @0xffffead0
mtk_init_mcu: Loaded (and reset) mcupm.bin in 41 msecs (122184 bytes)
TEST=we can see the mcupm logs after reset releases.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id1e62d9d6ede1c453e03eeda0d9b16fafa9e2372
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Geralt reference design has both eMMC and SD card interfaces, so we have
to configure both in ramstage.
Implement msdc.c (mass storage device class) to place the eMMC and SD
card drivers.
This implementation is based on chapter 5.9 in MT8188 Functional
Specification.
TEST=boot to kernel using emmc successfully.
BUG=b:236331724
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com>
Change-Id: I6594c8466a133d3fdb0084716acca8dcf785f94f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65975
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For MT8188, we need to enable and adjust VMCH and VMC to support SD
cards. Therefore, we add VPA and VSIM1 voltage adjustment APIs.
TEST=measure 3.0V in VMCH and VMC.
BUG=b:236331724
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I03938f9ef17a0bdd615bcbbfc7b59fa5acb8fbfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65874
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PMIF, SPI, SPMI and PMIC init code.
These PMIC settings are used by MediaTek internally. We can find these
registers in "MT6365_PMIC_Data_Sheet_V1.4.pdf" and
"MT6315 datasheet v1.3.pdf". The setting values are provided by MeidaTek
designers.
TEST=build pass
BUG=b:233720142
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I05a51894b130a59c28d957b64d6401c8bb9cee91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add usb host function support.
TEST=read usb data successfully.
BUG=b:236331724
Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com>
Change-Id: I3494b687b811466cb6b988164d3c5b6fecc3016a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65754
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Turn off L2C SRAM and reconfigure as L2 cache:
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
the L2C SRAM as L2 cache.
- Configure DMA buffer in DRAM:
Set DRAM DMA to be non-cacheable to load blob correctly.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I10f1cb8c62dfa78f59a4a5ea6087609668a0c2aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65753
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add power domain data for video and audio.
TEST=build pass
BUG=b:233720142
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Change-Id: Ic5fd496cbc6904b42eae28a62bf00a71f0ef508d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add PLL and clock init code, frequency meter and APIs for raising little
CPU/CCI frequency.
For usb clock setting, we also implement mt_pll_usb_clock_setting() to
enable usb clock for all ports.
TEST=build pass
BUG=b:233720142
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Change-Id: I03cb5a4c6fa5ddad7da6f955d0c6d0b3395503e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add I2C controller drivers.
TEST=build pass
BUG=b:233720142
Signed-off-by: kewei.xu <kewei.xu@mediatek.corp-partner.google.com>
Change-Id: I7d19df3571e5588c7b20d9c7f26fa177b2221851
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add NOR-Flash drivers for flash read/write.
TEST=read nor flash data successfully.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I4e84fc023111b86f7f4984020d24811e3361ba03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65621
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add GPIO drivers to let other module control GPIOs.
TEST=build pass
BUG=b:233720142
Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com>
Change-Id: I0a2a5178949e9ad3e033ac332e0f1e8565e39b3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65619
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add timer drivers to Makefile.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I0e3e58c7118a18e738a5abba391db0be9cfd7bf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65588
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add watchdog support for MT8188.
This implementation is based on chapter 3.10.10 in MT8188 Functional
Specification.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iaf56c78d89af53d0272583b463c050e69bbeb07a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65587
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add new folder and basic drivers for Mediatek SoC 'MT8188'.
Difference of modules including in this patch between MT8188 and
existing SoCs:
Timer:
Similar to MT8195 and MT8186, MT8188 uses v2 timer.
EMI/PLL/SPI:
Different from existing SoCs.
The implementation is based on these files:
MT8188G_Application Processor Technical Brief_v0.4.pdf
MT8188G_Functional Specification v0.4.pdf
MT8188 Application Processor Registers-1.pdf
MT8188 Application Processor Registers-2.pdf
TEST=saw the coreboot uart log to bootblock
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3320f3d49a9b9ed781ceb812e4341e379db4ac20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65585
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
|