summaryrefslogtreecommitdiff
path: root/src/soc/mediatek/mt8186
AgeCommit message (Collapse)Author
2024-09-12soc/mediatek: Remove redundant struct pad_func and PAD_* definitionsYidi Lin
Clean up redundant `struct pad_func` and `PAD_*` definitions. This patch also refactors the PAD_* macros by, - Repurposing PAD_FUNC and dropping PAD_FUNC_SEL. - Adding PAD_FUNC_DOWN and PAD_FUNC_UP to avoid the implicit initialization. BUG=none TEST=emerge-{elm, kukui, asurada, cherry, corsola, geralt, rauru} coreboot Change-Id: I12b8f6749015bff52988208a7c3aa01e952612c6 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84222 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-09soc/mediatek/common: Move common GPIO definitions to gpio_defs.hYidi Lin
BUG=none TEST=emerge-{asurada, cherry, corsola, geralt, rauru} coreboot Change-Id: If35dcc4d88732f92c7c43a5eed0478ec52cf1802 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84221 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-24soc/mediatek: Refactor MMU operation for L2C SRAM and DMAJarried Lin
Refactor mmu operation by - moving mtk_soc_disable_l2c_sram to l2c_ops.c - keeping mtk_soc_after_dram in mmu_cmops.c Change-Id: I14bd8a82e0b5f8f00ce2b52e5aee918e130912d4 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83937 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-24soc/mediatek: Require MCU and DRAM blobs to existYu-Ping Wu
When the config of MCU firmware blob such as CONFIG_SPM_FIRMWARE is non-empty, we should always expect the file to exist. Similarly, since the device is unlikely to boot without the DRAM blob (assuming MRC_CACHE doesn't contain valid memory training data), dram.elf should always exist as well. Therefore, remove the check for the existence of the blobs. Build would fail if any of the blobs is missing. Change-Id: I755e7c5a70b34b0c3d3915ab339c65263688aad7 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84053 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23soc/mediatek/common: Move GPIO definition to the common directoryJarried Lin
To reduce duplicate gpio_base.h in each SoC folder, move gpio_base.h to mediatek/common folder. TEST=Build pass BUG=b:317009620 Change-Id: I815df8a3083cf04b821165ec834ca98ee71a0c78 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-08-10soc/mediatek/common: Refactor EINT driverYidi Lin
Refactor EINT driver by - Move `pos_bit_calc_for_eint` to `common/gpio_eint_v1.c` and rename to `gpio_calc_eint_pos_bit`. - Implement `gpio_get_eint_reg` to obtain EINT base address. This change is prepared for the driver change in MT8196. BUG=b:334723688 TEST=EINT works on Geralt Change-Id: Ie53abc23971bfa39250ebd7dd48e28d6b91c5973 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83703 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-22soc/mediatek: Move memmory macros into MediaTek common directoryJarried Lin
To reduce duplicate memmory macros of MediaTek SoCs, move the header file to a common directory. TEST=Build geralt pass BUG=b:317009620 Change-Id: Iea4add8fe3735085c13438a2e177bec177913191 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83571 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-22soc/mediatek: Move symbols.h into MediaTek common directoryJarried Lin
To reduce duplicate region declarations of MediaTek SoCs, move the header file to a common directory. BUG=b:317009620 TEST=Build geralt pass. Change-Id: Iad1c9f520cdc5c6ad2b55e8f4ec6149fa47b17b1 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83570 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29tree: Remove unused <stddef.h>Elyes Haouas
Change-Id: I7d7ad562eeff7247b7377b6570d489faee0aeda0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82669 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-05-03mb/google/corsola: Initialize USB port 0Wentao Qin
The default MT8186 platform is to initialize USB3 port 1. Use option bit 27 in fw_config to enable initialization of USB2 port 0 to support devices mounted on it. BUG=b:335124437 TEST=boot to OS from USB-A boot to OS from SD Card BRANCH=corsola Change-Id: I725b80593f5fc498a204bf47f943c36ccbd78134 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82089 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-04-11tree: Drop unused <halt.h>Elyes Haouas
Change-Id: Icd00f30a96c53f70babdcb8a77c4b6c2868619d8 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-04-09tree: Drop unused <console/console.h>Elyes Haouas
Change-Id: Ib1a8fc50217c84e835080c70269ff50fc001392c Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81811 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-28soc/mediatek: Remove blank lines before '}' and after '{'Elyes Haouas
Change-Id: I0ce2b61329efede1ba8a02446610e3eb635ceedc Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81462 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-02-26soc/mediatek: Add `MEDIATEK_DRAM_ADAPTIVE` config to support dram adaptiveYidi Lin
Starting from MT8195, MediaTek platform supports "dram adaptive" to automatically detect dram information, including channel, rank, die size..., and can automatically configure EMI settings. So we can just pass a placeholder param blob to `mt_mem_init_run` by enabling this option. Platforms (MT8173, MT8183, MT8192) which do not support "dram adaptive" need to implement `get_sdram_config` to get onboard DRAM configuration info. TEST=emerge-geralt coreboot && emerge-asurada coreboot TEST=CONFIG_MEDIATEK_DRAM_ADAPTIVE is set to y on geralt TEST=CONFIG_MEDIATEK_DRAM_ADAPTIVE is no set on asurada Change-Id: I05a01b1ab13fbf19b2a908c48a540a5c2e1ccbdc Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-02-18soc: Add SPDX license headers to Kconfig filesMartin Roth
Change-Id: Ie7bc4f3ae00bb9601001dbb71e7c3c84fd4f759a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80596 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-31include/device/device.h: Remove CHIP_NAME() macroNicholas Sudsgaard
Macros can be confusing on their own; hiding commas make things worse. This can sometimes be downright misleading. A "good" example would be the code in soc/intel/xeon_sp/spr/chip.c: CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev, This appears as CHIP_NAME() being some struct when in fact these are defining 2 separate members of the same struct. It was decided to remove this macro altogether, as it does not do anything special and incurs a maintenance burden. Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0 Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Jakub Czapiga <czapiga@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-01-24soc/*: Rename Makefiles from .inc to .mkMartin Roth
The .inc suffix is confusing to various tools as it's not specific to Makefiles. This means that editors don't recognize the files, and don't open them with highlighting and any other specific editor functionality. This issue is also seen in the release notes generation script where Makefiles get renamed before running cloc. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I6f502b97864fd7782e514ee2daa902d2081633a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80074 Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-01-10mb/google/corsola: Use common mtk_display_init()Yidi Lin
TEST=check FW screen on Steelix, Tentacruel and Starmie Change-Id: I429218d59389a6ab86b522dd597c07fa5b8ea821 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79777 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-11memlayout.ld: Increase RAMSTAGE size to more than 1MB everywherePatrick Georgi
This is in preparation of a larger heap. I went for 2MB because why not? Change-Id: I51f999a10ba894a7f2f5fce224d30bf914107c38 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-09-22soc/mediatek: Move common devapc definitions to common/Nina Wu
Move following definitions to common/ 1) the definition of the bit fields for domain remap 2) the definition of the structure for the permission of all domains Change-Id: Iac84ebc908ae384a6280388af4120f6349a32ed4 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77860 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-01soc/mediatek/common: Add support for power supply TPS65132SRuihai Zhou
The TPS65132S is designed to supply positive/negative driven application. It communicates through standard I2C compatible interface, and it intergrates a EEPROM whose contents will be loaded into the register at startup. Since TPS65132S is used in staryu and geralt projects, we move the implementation to mediatek/common. The datasheet: TPS65132-Single-Inductor-Dual-Output-Power-Supply.pdf BUG=b:282902297 TEST=boot starmie to firmware screen Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: Iad2c9bdea5824455efcef18b44876111061cfa1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/75488 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-14soc/mediatek: Add assert for regulator VRF12Cong Yang
Add assert for MT6366_VRF12, define a constant macro for 1200000. BUG=none TEST=build board starmie with mt8186. Change-Id: I6d6a969ae993afcda0596a19928e8f98f343d589 Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74394 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-04-14soc/mediatek: Add support for regulator VIO18Cong Yang
To provide power to MIPI panel STA_HIMAX83102_J02, add support for regulator VIO18. BUG=b:272425116 TEST=test firmware display pass for STA_HIMAX83102_J02 on Starmie. Change-Id: I3c3aa105e648b87fc39f881d762002f67b4422b5 Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74341 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
2023-04-10soc/mediatek/mt8186: Move GPIO driving-related functions to commonJason Chen
Move GPIO driving-related functions to common for code reuse. BUG=b:270911452 TEST=build pass Change-Id: I234a2b7ef5075313144a930332bed10ffec00c6c Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74068 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8186: Reduce GPIO code size in bootblockJason Chen
Create a new GPIO driving info table that contains only the pins used in the bootblock. The GPIO driving info table is downsized from 1480 bytes to 24 bytes. BUG=b:270911452 TEST=build pass Change-Id: I24775ba93cd74ae401747c2f5a26bbf1c8f6ac0a Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74062 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15soc/mediatek/mt8186: Shut down PMIC on power key long pressSen Chu
Currently on power key long press, PMIC will be reset. It would cause an unwanted reset pulse in the power-off sequence. To match expected sequence, change PMIC behavior to "force shutdown". BUG=b:271771606 TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse BRANCH=corsola Change-Id: I9ab35d82e57f43bac99fa8bd7bb69fcf52250311 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73705 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-10soc/mediatek/mt8188: Enable lastbus debug hardwareot_zhenguo.li
Lastbus is a bus debug tool. When the bus hangs, the bus transmission information before resetting will be recorded. The watchdog cannot clear it and it will be printed out for bus hanging analysis. There are two versions for lastbus: Version 1 for MT8186, and version 2 for MT8188. BUG=b:263753374 TEST=build pass. Change-Id: Ibaf510481d1941376bd8da0168ef17c99a0fb9a2 Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73624 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-23soc/mediatek: Add "DRAM" to Kconfig MEDIATEK_BLOB_FAST_INIT nameYu-Ping Wu
In the current Kconfig option MEDIATEK_BLOB_FAST_INIT, the meaning of "BLOB" is unclear. Add "DRAM" to the name. BUG=b:204226005 TEST=./util/abuild/abuild -t GOOGLE_STEELIX -x Change-Id: Ida7bda770f1d1a40cae205b08c8cb22f2329e49f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73155 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-13soc/mediatek: Include <gpio.h> instead of <soc/gpio.h>Elyes Haouas
<gpio.h> chain-include <soc/gpio.h>. Change-Id: If2af7f77e2d910a3f3470d15dbfc98775a2633b6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2023-01-11treewide: stop calling custom TPM log "TCPA"Sergii Dmytruk
TCPA usually refers to log described by TPM 1.2 specification. Change-Id: I896bd94f18b34d6c4b280f58b011d704df3d4022 Ticket: https://ticket.coreboot.org/issues/423 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-12-22soc/mediatek: Move dapc_init to commonYidi Lin
dapc_init flow is the same on MT8186, MT8188 and MT8195. So move this function to common/devapc.c TEST=emerge-corsola coreboot; emerge-cherry coreboot; emerge-geralt coreboot TEST=devapc log is shown as expected and the system boots to kernel Change-Id: I979c3a3721a82d40c9e2db7fbe62e14a9bbd53d8 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71137 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-05soc/mediatek: Fix DSI register definition for MT8186Bo-Chen Chen
The DSI CMDQ offset of MT8186 is different from previous SoCs. Therefore, we define two versions for DSI register header files. The v1 is for MT8173/MT8183/MT8192 and the v2 is for MT8186/MT8188. BUG=b:244208960 TEST=build pass BRANCH=corsola Change-Id: I3d13ca03b72554ab7be2b194db32a4f961f38dad Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70183 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-31soc: Add SPDX license headers to MakefilesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic875708697f07b6dae09d27dbd67eb8b960749f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-10-21soc/mediatek: Unify PLL function namesRex-BC Chen
For consistency with the PLL function naming: - Rename edp_mux_set_sel() to mt_pll_edp_mux_set_sel(). - Rename mux_set_sel() to pll_mux_set_sel(). BUG=none TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ifc7b14bf0db5a5461037e2fbf41756d1542ca945 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68622 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add support for PMIC MT6315Sen Chu
On MT8186T, the big cores are powered on by MT6315 via PMIF. This patch adds the following changes. - Add MT6315 settings. - Configure PMIC PMIF for MT6315. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id01931e564b0b5002b8d6b9d13d4f32cdf0ae708 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68620 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add PMIF_SPMI_IOCFG_DEFAULT_SETTING Kconfig optionRex-BC Chen
For MT8186, PMIF_SPMI mode is the hardware default setting, so we don't need to configure PMIF SPMI IO pins. Add a config to control that. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I92b54e8379a5dec55ef95cbd72ce03abd3a4954b Reviewed-on: https://review.coreboot.org/c/coreboot/+/68578 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add PWRAP_WITH_PMIF_SPMI Kconfig optionRex-BC Chen
On MT8186, PMIC interface supports PWRAP and PMIF_SPMI while other MediaTek SoCs support PMIF_SPMI and PMIF_SPI. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I20efa6d84975d781972af9143c0c7e3a272653e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68577 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add support for reading CPU IDRex-BC Chen
MT8186 has two slightly different versions: MT8186G and MT8186T (turbo version). Add get_cpu_id() to identify different CPUs. BUG=b:249436110 TEST=cpu id is correct. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I0612dd589e11853dbddc1d99526e9c9bf170acec Reviewed-on: https://review.coreboot.org/c/coreboot/+/68576 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Add DEVAPC settings for ADSPTinghan Shen
Add DEVAPC permission settings for ADSP and set its domain number to 6. TEST=SOF driver is functional. BUG=b:204229221 Change-Id: I37bfea70386af953e89f3c38ac51e41af6aafa6e Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68290 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Inititalize ADSPTinghan Shen
To use SOF correctly, we need to initialize ADSP in coreboot stage. TEST=SOF driver is functional. BUG=b:204229221 Change-Id: I45db587252ccdcdf75e0be2029743034a79925c5 Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68289 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Add mtcmos power-on control for ADSPMandy Liu
To use SOF correctly, we need to enable power domain of ADSP. TEST=SOF driver is functional. BUG=b:204229221 Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Change-Id: I39d1357af5f901a91379fdf7e595f16952b962de Reviewed-on: https://review.coreboot.org/c/coreboot/+/68288 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Enable ADSP clockMandy Liu
To use SOF correctly, we need to enable ADSP clock. TEST=SOF driver is functional. BUG=b:204229221 Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Change-Id: Ia17db889829df2668cf2af1b71c6468230de68e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68287 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-26soc/mediatek/mt8186: Allow SCP to access H264 encoderRunyang Chen
Issue: Camera APP is not functional after CB:67434 applied. Root cause and solution: SCP hardware needs to access H264 encoder registers, so we need to remove the DEVAPC protection of H264 encoder for SCP. BUG=b:247743696 TEST=camera APP is functional. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I95946346018bff6a8f2dc02b1ff3e24ad079fc90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67787 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-09soc/mediatek/mt8186: Enable lastbus debug hardwareot_zhenguo.li
Lastbus is a bus debug tool. When the bus hangs, the bus transmission information before resetting will be recorded. The watchdog cannot clear it and it will be printed out for bus hanging analysis. TEST=build pass. BUG=none Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com> Change-Id: Iff39486dfad556a3104b2f2b6811c34c2ded6954 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-09soc/mediatek/mt8186: Enable the protection of DEVAPCRunyang Chen
Enable the protection for DEVAPC registers of AO domain. TEST=build pass. BUG=b:244250435 Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I8535438d4c7da29c9dcd97be9a2af05ea4690064 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67434 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-09soc/mediatek/mt8186: Complete DEVAPC settingsRunyang Chen
In the previous patch (CB:60317), only basic settings were added. Now complete DEVPAC settings on MT8186. 1. Update permission setting 2. Update master domain setting: - domain 4: SCP - domain 5: SPM 3. Set domain remap - MMSYS (4-bit to 2-bit) TEST=test on kernel correctly. BUG=b:204229221 Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I40a9b115fb21b6b955fde358241f4483b85e3db3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67433 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-09soc/mediatek/mt8186: Enable CPU power hardware tracking for PMIC MT6366Sen Chu
1. There are two power sources for CPU: - Logic power (VPROC). - SRAM power (VSRAM_PROC). 2. There is a constraint between VPROC and VSRAM_PROC: - 0mV <= VSRAM_PROC - VPROC <= 250mV. With software control, the constraint might not always hold. Therefore, we enable hardware tracking from PMIC MT6366 to ensure the constraint is met automatically. BUG=b:236353282, b:241615706 TEST=meet the constrain correctly when adjusting the voltage. Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Change-Id: I6012c57e60c009f1d599b57aab1c2526ee789208 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67436 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07soc/mediatek: a common implementation to register BL31 resetHung-Te Lin
The implementations of register_reset_to_bl31() are the same for MedaiTek platforms, so we extract them to soc/common/bl31.c. BUG=None TEST=build pass Change-Id: I297ea2e18a6d7e92236cf415844b166523616bdf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move some SPM functions to commonBo-Chen Chen
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and MT8188, so we move them to common/spm.c. TEST=build pass. BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move common DEVPAC enums and functions to commonBo-Chen Chen
Some enums and functions are the same in DEVAPC driver for MT8195, MT8186, and MT8188, so we move them to common folder. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-27soc/mediatek: Move emi.c to common folderRex-BC Chen
The emi.c is the same for MT8186 and MT8188, so we could move it to the common folder and reuse it. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I225f1d07c973129172f01bf7f4d7f5d5abe7c02b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66328 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-18soc/mediatek/mt8186: spm: Remove redundant callYidi Lin
spm_set_power_control() is already called in spm_init(). It is not necessary to call spm_set_power_control() again in the mtk_mcu reset callback. TEST=check SPM PC value (0x250) after SPM is loaded. [INFO ] SPM: spm_init done in 54 msecs, spm pc = 0x250 Signed-off-by: Yidi Lin <yidilin@chromium.org> Change-Id: I7ee517e1eb6485c52155a69d05781a61ddfe4cad Reviewed-on: https://review.coreboot.org/c/coreboot/+/66785 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13soc/mediatek: Move common definition of DFD to common folderRex-BC Chen
We use the same dump address and size for DFD in all MediaTek SoCs, so we move them to dfd_common.h and rename dfd_common.h to dfd.h. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I162bbb0a82e3b55c8cfbbd20e28a54ad01fd6b0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66585 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-12soc/mediatek/mt8186: Enable USB macro controlAllen-KH Cheng
When powering down SSUSB, the system needs to wait the ACK from SSUSB. We found that the setting of USB PAD top macro is not correct and it will cause timeout waiting for the ACK from SSUSB. To resolve this, we add mt_pll_set_usb_clock() in pll.c to enable usb macro control for powering down SSUSB. TEST=timeout of ssusb powerdown ack does not occur. BUG=b:239634625 Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.corp-partner.google.com> Change-Id: I58ba86e0467284e9947bfda1005c151a3e0c8881 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66600 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-03soc/mediatek: Move common definitions to dramc_soc_common.hRex-BC Chen
Some definitions are the same in dramc_soc.h for MT8192, MT8195 and MT8186, so we move them to dramc_soc_common.h TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3095333e62abf98de1f2d27033baeeba7a4cad79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66276 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Create GET_TICK_DLY_REG macro for SPI tick delay settingRex-BC Chen
MT8188 SPI tick delay setting is moved to `spi_cmd_reg` register which is different from previous SoCs, so we define a macro to get the designated register. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia30e94a8688c0e1c1d4b3d15206f28e5bd8c9bd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66184 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Move common definitions from rtc.h to rtc_reg_common.hRex-BC Chen
Move the common definitions to rtc_reg_common.h, so we can reuse those definitions on MT8188. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia1d916a88b7cb875b35ee5813b7b52d9e98f5009 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66180 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Move struct mtk_auxadc_regs to auxadc_common.hRex-BC Chen
The AUXADC register definitions are the same for all MediaTek SoCs, so we move struct mtk_auxadc_regs to auxadc_common.h. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I48978a93137a7de42f8ea2873be3130cb8f534f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21mb/google: Replace some strings in regulator.cRex-BC Chen
From comments of CB:65875, we replace *_vol to *_voltage. s/mainboard_set_regulator_vol/mainboard_set_regulator_voltage/ s/mainboard_get_regulator_vol/mainboard_get_regulator_voltage/ TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iadf0408e8914d6e32915464f93979978c4634eaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-06soc/mediatek: Move FLASH_DUAL_READ to commonRex-BC Chen
FLASH_DUAL_READ is a common configuration for all MediaTek SoCs, so we move it to common folder and select it in SoCs' Kconfig. As suggested in CB:58837, we also rename FLASH_DUAL_READ to FLASH_DUAL_IO_READ to reduce confusion. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: If267a332519412a7919c5b7817047fabe4a564c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65620 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-06soc/mediatek: Move some gpio functions to common/gpio_op.cRex-BC Chen
gpio_set_pull(), gpio_set_pull_pu_pd() and gpio_set_spec_pull_pupd() can be reused for mt8192, mt8195 and mt8186, so move it to new file "gpio_op.c" in common folder. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I81ab9b01ee20fccf3ef29c5902597b5045d3e36a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65641 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek: Make timer_prepare() a common functionRex-BC Chen
timer_prepare() is the same for MT8195 and MT8186, so move it to common folder. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I91a6f4ecc665a058cb7a0ba96c15b27d6dc97d13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65602 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-06soc/mediatek: Move wdt_set_req() to common folderBo-Chen Chen
There are more and more variables which are SoC-specific, so add soc/wdt.h for each SoC and rename common/wdt.h to common/wdt_common.h. wdt_set_req() is almost the same for mt8192, mt8195 and mt8186, so move it to a common file wdt_req.c. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I7a334b3e7cd4f24a848dd31aca546dc7236d5fb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65636 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-06-26soc/mediatek: Do resource transitionKyösti Mälkki
Change-Id: I668a39c603870329fd1528ddc5f3a42a379e1e76 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65267 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-24soc/mediatek: Clean up Makefile.inc for mt8186, mt8192 and mt8195Yidi Lin
Clean up Makefile.inc by sorting entries and moving common entries to all-y. In this way it is more clear to know what drivers have been involved in each stage and the hardware differences between each SoC. BUG=none TEST=emerge-corsola coreboot TEST=emerge-asurada coreboot TEST=emerge-cherry coreboot Change-Id: Idfc7de36ebf36650f7c6bd1584ef77e2a540cde9 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65315 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-22device/resource: Add _kb postfix for resource allocatorsKyösti Mälkki
There is a lot of going back-and-forth with the KiB arguments, start the work to migrate away from this. Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-07Replace some ENV_ROMSTAGE with ENV_RAMINITKyösti Mälkki
With a combined bootblock+romstage ENV_ROMSTAGE might no longer evaluate true. Change-Id: I733cf4e4ab177e35cd260318556ece1e73d082dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63376 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-06-03soc/mediatek: Rename mtk_wdt_preinit() to mtk_wdt_set_req()Rex-BC Chen
To simplify the calling sequence for mtk_wdt_preinit() and we always adjust request setting in mtk_wdt_preinit(), we rename mtk_wdt_preinit() to mtk_wdt_set_req() and call it in mtk_wdt_init(). From this modification, we can also enable thermal hardware reset feature (CB:64676, CB:64675) in MT8192 and MT8195. BUG=none TEST=build pass Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I1904ff9387f7677a077068f2c3df923bd642ea3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-06-01soc/mediatek/mt8186/pll.c: Fix typo in log messageElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ied8eb0fb51d0521eedd8ff77b1083813d3843570 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-05-28soc/mediatek/mt8186: Enable thermal hardware resetRunyang Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8186 Function Specification. BUG=none TEST=emerge-corsola coreboot TEST=thermal hardware reset is working. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: Id2ed55e6d4f4eec450bf7c849f726a389eeb6694 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64659 Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-09soc/mediatek/mt8186: Change the power-down time slot from 0xA to 0xFzhiyong tao
PMIC_CPSDSA4[4:0] controls the power-down at the specified time slot. Setting it to 0xA would cause an extra delay of 20ms compared to 0xF. The value of time slot is from 0x0 to 0x1F which represents the delay when reset occurs. To avoid the delay, change the value from 0xA to 0xF. This modification is based on chapter 3.7 in the MT8186 functional specification. BUG=b:218630683, b:218630684 TEST=the power-off waveform is correct. Signed-off-by: zhiyong tao <zhiyong.tao@mediatek.corp-partner.google.com> Change-Id: I537fe87740f0f8c25b923d7d536e81503b71762b Reviewed-on: https://review.coreboot.org/c/coreboot/+/64038 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-05soc/mediatek/mt8186: Enlarge CBFS_MCACHE to 16KYu-Ping Wu
The per-file hash for CBFS_VERIFICATION, stored as a CBFS file attribute, would increase the total RO metadata size by 75% (3796->6656 for corsola). Therefore, in order to make RO metadata cache fit into CBFS_MCACHE, enlarge it from 8K to 16K. Adjust the memlayout by decreasing the DRAM_INIT_CODE from 196K to 184K (only 160K needed for now), and moving VBOOT2_WORK region to L2C. Also shuffle the regions in SRAM with better comments. BUG=b:229670703 TEST=emerge-corsola coreboot TEST=Enabled CBFS_VERIFICATION and booted kingler into kernel BRANCH=none Change-Id: I8e07eb9fae1644a0fbfbdc599ca0a0e11bbe54b5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-05-02soc/mediatek/mt8186: Prevent early USB wakeupRex-BC Chen
The MT8186 platform fails to suspend due to premature wakeup by USB. In MT8186, we use low level latch to keep USB wakeup signal. However, hardware could latch a wrong signal if it debounces more than one time. As a result, it would enable wakeup function too early. To prevent this issue, we do the following modification: - Delay about 100 us to enable wakeup function in kernel drivers [1]. - To guarantee 100 us is enough, we need to disable the USB debounce by default in coreboot. According to section register 0x404 and 0x420 in "(CODA) MT8169_PERICFG_REG.xls" which is only for MediaTek internal use: The current default value of debounce register for MT8186 USB IP0 and IP1 is incorrect. The reason we add in coreboot is that the default value should be correct when SoC is booting up. This modification is only for MT8186. The subsequent SoCs will adjust the wakeup function to correct register value by default. [1]: 0d8cfeeef3f5 (usb: xhci-mtk: fix random remote wakeup) TEST=after stress test, not found premature wakeup by USB BUG=b:228773975 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I296c4491c5959670a39fa8bd6ef987557bbc459f Reviewed-on: https://review.coreboot.org/c/coreboot/+/63858 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-07soc/mediatek/mt8186: Disable unused powerRex-BC Chen
To save the power consumption, we disable the unused power of optional components in coreboot. BUG=none TEST=the value of power consumption is as expected. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic0c7c2d1b6a4c26980a3029b60051ab1406406ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/63247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek/mt8186: Enable USE_CBMEM_DRAM_INFORex-BC Chen
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8186. Therefore, we select this configuration to enable it. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ieaaf57aaee79c9dce69cc1acaa092207f0f906de Reviewed-on: https://review.coreboot.org/c/coreboot/+/63114 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-29soc/mediatek/mt8186: Fix pmif setting for low power modeZhiyong Tao
The current pmif register setting for low power mode is incorrect, which is causing suspend failure. The issue of suspend failure is that SRCLKENA0 will not be pulled down. EC will not be informed AP is suspending now becuase of this. Therefore, add pmif_spmi_set_lp_mode() to correct the setting. This implementation is based on chapter 3.7 in MT8186 Functional Specification. BUG=b:215639203 TEST=test of suspend and resume pass. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Change-Id: I2d02198f19f9cb052fba612c02404a6af1a10adb Reviewed-on: https://review.coreboot.org/c/coreboot/+/63089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-23src/mediatek/mt8186: Implement sdram_size() to get real dram sizeXi Chen
Originally, dram size is hard-coded to 4GB by default. To support different dram size, calculate it from the mem chip info stored in CBMEM. BUG=b:206014043 TEST=Output "dram size: 0x100000000" on Kingler Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I017e9d1a2d6e26f1fc21b67b5962dfb5c6ade8a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-18soc/mediatek/mt8186: Disable unused spm_thermalRex-BC Chen
In MT8186, we need to disable spm_thermal to prevent it from influencing other wdt status. There are two hardware pathes which are used for asserting watchdog from thermal. We can disable status of path 1 because status of path 2 is used. 1. Thermal -> SPM -> WDT 2. Thermal -> WDT Spm_thermal (path 1) is a flexible option for software control, and the hardware designer suggests that we should disable it if we don't use it. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0ffde6bad3000a64e3b5782edaa72c62da034302 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62890 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18soc/mediatek: Set soc_ops.set_resources as no-opYu-Ping Wu
Without setting the set_resources field for soc_ops, we will get an error during device initialization: [ERROR] CPU_CLUSTER: 0 missing set_resources Because the set_resources field is considered mandatory, explicitly set it as no-op noop_set_resources. BUG=b:224419346 TEST=emerge-corsola coreboot TEST=Did not see the error on krabby BRANCH=none Change-Id: Ic82b86f0482a9de09e942c1674be5f0ac615851f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-15soc/mediatek/mt8186: change pmic hwcid from warning to infoRex-BC Chen
The pmic hwcid dumping should not be a warning, so we modify it to info. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a930b69bd45d5f0d84c3d269ca721b287dbadea Reviewed-on: https://review.coreboot.org/c/coreboot/+/62775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/mediatek/mt8186: Modify internal capid to 0xE0Rex-BC Chen
The mainboard may not be able to disable the internal cap, so we want to set 0xe0 for all boards to minimize the internal cap. And a mainboard implementation may choose XTAL with higher cload if the frequency requirement is met, and the total capacitance can be tuned externally for different boards. BUG=b:218439447 TEST=set capid to 0xe0. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2139e6b3456d7a50e3cdc8fc606e5f6ea3406044 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62563 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09soc/mediatek/mt8186: set pin drive strength to 8mA for NORRex-BC Chen
Set NOR pin drive to 8mA to comply with HW requirement. This implementation is according to chapter 5.1, 5.6 and 5.8 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=SPI SI tests for AP to NOR pass for both kingler and krabby. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5b6e37b0f7d4207ea35f11394d25ad1e096ac01a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-09soc/mediatek/mt8186: Add GPIO driving functionsGuodong Liu
Add GPIO driving functions to adjust pin driving. The value of drive strength is different for each SoC, so we define GPIO_DRV0 to GPIO_DRV7 which are corresponding to 2/4/6/8/10/12/14/16mA in MT8186. This implementation is according to chapter 5.1 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=build pass Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I6d987f28be98b515fa5c542222bda08bea1d5118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62471 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-02soc/mediatek/mt8186: Set RTC capid to 0xC0 to pass XTAL 26 MHz testRex-BC Chen
The XTAL 26MHz test failed on krabby, so we adjust RTC capid from default value 0x88 to 0xC0 for MT8186. We also add a new log message to show the capid value which is read from MT6366. This implementation is according to chapter 5.13 in MT8186 Functional Specification. BUG=b:218439447 TEST=set capid to 0xc0. TEST=XTAL 26MHz test passed. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I16ab46a5697d304e8001de231ffc9b7b7a2f9282 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02soc/mediatek: remove unused RTC_GPIO_USER_MASKRex-BC Chen
RTC_GPIO_USER_MASK is not used in any drivers, so we remove them. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0a15d5da142bb38feb595610d69566330e31fedd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-23src/mediatek: Refactor dramc_param to share more structuresXi Chen
The ddr_base_info struct, which stores basic DDR information, should be platform independent. Currently the struct is defined in each SoC's dramc_parah.h. To prevent code duplication, move it as well as other related structs and enums to a common header. Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I99772427f9b0755dc2c778b5f4150b2f8147bcc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-23soc/mediatek/mt8186: disable VSRAM_CORERex-BC Chen
VSRAM_CORE is not used on kingler/krabby, so we disable it. This implementation is according to chapter 3.7 in MT8186 Functional Specification. BUG=b:220071688 TEST=the rail steadily shows 0V in either S0, S3, and S5. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5256f6a2c0ca5a951dc79f564575b526a84463fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62253 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-11soc/mediatek/mt8186: Lower SPI NOR speed to 52MHizYu-Ping Wu
The current SPI NOR speed mainpll_d7_d2 (78MHz) is too fast for MT8186's HW design, which is capable of up to 52MHz. Therefore, lower the speed to univpll_d3_d8 (52MHz). BUG=b:218775654 TEST=emerge-corsola coreboot TEST=Boot time didn't increase significantly BRAHCH=none Change-Id: I5a03e41d4ce47d45b97a805b9b98877ef0dac7b7 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-02-09soc/mediatek/mt8186: Fix issue of clearing watchdog statusRex-BC Chen
The implementation of clearing watchdog status is wrong in CB:58835. The value written to the 'wdt_mode' register should be 'wdt_mode | 0x22000000' instead of 'wdt_status | 0x22000000'. BUG=b:204229208 TEST=check watchdog status is cleared. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I8c5dbaab2ac43d3867037bc4160aa5af2d79284f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-09soc/mediatek/mt8186: Support DRAM fast calibration using blobXi Chen
For most MediaTek SoCs (MT8183, MT8192, MT8195) we rely on an external program (e.g., the "DRAM blob") to do the full DRAM calibration first, then store and and apply the generated parameters to the reference "fast DRAM calibration" in the vendor/mediatek folder for normal system boot. Starting with MT8186 the implementation of fast calibration may need to be changed, and a "DRAM blob" only path is introduced for devices that have to do both full and fast calibration using the external blob. TEST=fast calibration pass on kingler/krabby BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: If25a7dd6aa6261ecff79a1b4df8b1f2e53d896dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/61133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-29soc/mediatek/mt8186: Add register protect control for MT6366Rex-BC Chen
Some registers of PMIC init settings are protected, so we failed to set the correct value for init_setting. We disable protection before setting PMIC init setting and enable it afterward. BUG=b:216263707 TEST=PMIC setting value is set correctly. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I94d73d9c8a137444988e65c3709d29a3a4c03c5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61390 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-26soc/mediatek/mt8186: Use BIT() macro for arbiter enable bitRex-BC Chen
Replace (1 << x) with BIT(x) in pmic_wrap.h. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I463589f02065a228a8af74447b4586e5b54e0b3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61351 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-26soc/mediatek/mt8186: Update PWRAP arbiter enable bitRex-BC Chen
There is no wakeup source when we test function of suspend and resume. The root cause is that the monitor enable bit of PWRAP is not configured correctly. BUG=b:213255218, b:214978483 TEST=receive wakeup source from MT6366 successfully Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I324d18fa5d3cd745c35fcf0f207e1b444b5e898b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61330 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-24soc/mediatek: Extract dramc_param_header to a common headerXi Chen
To be shared with different SOCs, move the dramc_param_header struct as well DRAMC_PARAM_FLAG and DRAMC_PARAM_CONFIG enums to a common header file dramc_param_common.h. TEST=fast calibration pass BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I087971799803e47e34c30063b2b0bd0cfc5795ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/61132 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-10src/soc/mediatek: Remove unused <timer.h>Elyes HAOUAS
Change-Id: Ic87e41a9b317cc7d0b36ece5ffd1d32068e6a33a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-07soc/mediatek/mt8186: fix incorrect devapc settingsRunyang Chen
We need to protect debugsys for firmware image without serial console. Original settings for protecting debugsys is wrong which will cause some hardware modules to fail to set their registers correctly. We move the setting from MM_AO_APC to INFRA_AO_APC because the setting of debugsys is defined in INFRA_AO_APC and set the debugsys index to correct value of 94. BUG=b:213125558 TEST=all modules work normally using image without serial console. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: Ibce626386ac1f8de42f8717c4ad9ba403640b3ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/60833 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-07soc/mediatek/mt8186: initialize DFDRex-BC Chen
DFD (Design for Debug) is a debugging tool, which scans flip-flops and dumps to internal RAM on the WDT reset. After system reboots, those values can be shown for debugging using MTK internal parsing tools. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7b711755022b5d9767019611151fea65e71edc66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60828 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-06soc/mediatek/mt8186: Increase CBFS_MCACHE size to 8KiBRex-BC Chen
The current CBFS mcache size (roughly 7KiB) is insufficient for mt8186, so we need to increase it by 1KiB (and decrease the stack by 1KiB). Error logs: CBFS ERROR: mcache overflow, should increase CBFS_MCACHE size! CBFS: mcache @0x0010e004 built for 63 files, used 0xde4 of 0xdfc bytes BUG=b:202871018 TEST=no cbfs error logs. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I1e627ede3774665575006f752f89101e3c5bde9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/60529 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-05soc/mediatek: Remove unused <string.h>Elyes HAOUAS
Change-Id: I8f88541dce457e978a2cbea036d4f6eae387963f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-01soc/mediatek/mt8186: Add support for regulator VRF12/VCN33Rex-BC Chen
To provide power to PS8640, the eDP bridge IC on krabby, add control of VRF12 and VCN33 to set voltage from MT6366. TEST=measure 1.2V from VRF12 and 3.3V from VCN33. BUG=b:210806060 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I55a9ca16e1e335e9355d0a1b30c278a9969db197 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 18:24:31 +0000