Age | Commit message (Expand) | Author |
2021-05-05 | soc/mediatek: Move the power domain data under each SoC | Weiyi Lu |
2021-05-05 | soc/mediatek: Move the common part of SPI drivers to common/ | Rex-BC Chen |
2021-04-26 | soc/mediatek/mt8195: Add timer support | Yidi Lin |
2021-03-08 | soc/mediatek/mt8173,mt8183: revise SOC DRAM implementation | Xi Chen |
2021-01-15 | soc/mediatek/mt8183: Support byte mode and single rank DDR | Shaoming Chen |
2021-01-07 | soc/mediatek: rtc: Use `bool` as return type | Yidi Lin |
2020-12-28 | soc/mediatek/mt8192: add rtc MT6359P driver | Yuchen Huang |
2020-12-10 | soc/mediatek/mt8183: Add DRAM_DMA section | Yidi Lin |
2020-11-20 | soc/mediatek: Move auxadc driver from MT8183 to common | Po Xu |
2020-09-25 | soc/mediatek/mt8183: Enable CA perbit mechanism | Huayang Duan |
2020-09-16 | soc/mediatek: move power status bits under each chip | Weiyi Lu |
2020-09-10 | soc/mediatek: Drop unneeded empty lines | Elyes HAOUAS |
2020-09-01 | {include,mb,soc,sb,vendorcode}: Make hexadecimal notation consistent | Subrata Banik |
2020-08-06 | soc/mediatek/mt8183: Add ddr geometry to support 6GB, 8GB DDR bootup | Huayang Duan |
2020-08-06 | soc/mediatek/mt8183: Adjust tRFCab and tRFCpb by the density value | Huayang Duan |
2020-07-26 | src/soc/mediatek: Add include <types.h> | Elyes HAOUAS |
2020-06-13 | treewide: Add Kconfig variable MEMLAYOUT_LD_FILE | Furquan Shaikh |
2020-06-02 | src: Remove redundant includes | Elyes HAOUAS |
2020-05-20 | soc/mediatek/mt8183: Set CA and DQ vref range to correct value | Huayang Duan |
2020-05-13 | soc/mediatek: improve ca53 frequency change procedure | Weiyi Lu |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-05-06 | treewide: replace GPLv2 long form headers with SPDX header | Patrick Georgi |
2020-04-05 | soc/mediatek: Use SPDX for GPL-2.0-only files | Angel Pons |
2020-03-31 | security/vboot: Decouple measured boot from verified boot | Bill XIE |
2020-03-18 | soc: Remove copyright notices | Patrick Georgi |
2020-03-06 | soc/mediatek/mt8183: Improve the DRAMC runtime config flow | Huayang Duan |
2020-03-06 | soc/mediatek/mt8183: Do TX tracking for DRAM DVFS feature | Huayang Duan |
2019-11-18 | include: Make stdbool.h a separate file | Julius Werner |
2019-11-16 | soc/mediatek/mt8183: Get more space for PreRAM memconsole | Hung-Te Lin |
2019-11-14 | lib/fmap: Add optional pre-RAM cache | Julius Werner |
2019-11-01 | soc/{mediatek,sifive}: Remove unused 'include <arch/barrier.h>' | Elyes HAOUAS |
2019-10-31 | soc/mediatek/mt8183: Disable DRAM DVFS in recovery mode | Yu-Ping Wu |
2019-10-28 | soc/mediatek/mt8183: Pass MR values as function arguments | Yu-Ping Wu |
2019-10-24 | soc/mediatek/mt8183: Improve DRAM calibration logs | Yu-Ping Wu |
2019-10-21 | src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>' | Elyes HAOUAS |
2019-10-20 | src: Remove unused 'include <string.h>' | Elyes HAOUAS |
2019-10-18 | soc/mediatek/mt8183: Pass impedance data as a function argument | Yu-Ping Wu |
2019-10-18 | soc/mediatek/mt8183: Run calibration with multiple frequencies for DVFS switch | Huayang Duan |
2019-10-18 | soc/mediatek/mt8183: Allow modifying vddq voltage | Hsin-Hsiung Wang |
2019-10-18 | soc/mediatek/mt8183: Allow modifying vdram1 voltage | Hsin-Hsiung Wang |
2019-10-18 | soc/mediatek/mt8183: Share console for calibration blob output | Hung-Te Lin |
2019-10-17 | soc/mediatek/mt8183: Refactor DRAM init by bit fields API | Hung-Te Lin |
2019-10-17 | soc/mediatek/mt8183: Handle memory test failure | Yu-Ping Wu |
2019-10-09 | soc/mediatek/mt8183: Change argument type of mt_set_emi | Yu-Ping Wu |
2019-10-09 | soc/mediatek/mt8183: Run DRAM full calibration | Huayang Duan |
2019-10-09 | soc/mediatek/mt8183: Use cached calibration result for faster bootup | Huayang Duan |
2019-10-09 | soc/mediatek/mt8183: Add the shared 'dramc_param' module | Yu-Ping Wu |
2019-10-02 | mediatek/mt8183: Rename fields of struct sdram_params | Yu-Ping Wu |
2019-10-01 | mediatek/mt8183: Allow modifying vcore voltage | Hsin-Hsiung Wang |
2019-09-30 | mediatek/mt8183: Init SPM driver | Dawei Chien |
2019-09-24 | mediatek/mt8183: Use different DRAM frequencies for eMCP DDR | Huayang Duan |
2019-09-20 | mediatek/mt8183: Support more DRAM frequency bootup | Huayang Duan |
2019-09-20 | mediatek/mt8183: Implement the dramc init setting | Huayang Duan |
2019-09-04 | mediatek/mt8183: postpone dcxo low power mode setting | Weiyi Lu |
2019-08-21 | mediatek/mt8183: add scp voltage initialization | Hsin-Hsiung Wang |
2019-08-21 | mediatek/mt8183: Enlarge PRERAM_CBFS_CACHE region | Tristan Shieh |
2019-08-21 | mediatek/mt8183: Overlap decompressor, verstage and romstage | Tristan Shieh |
2019-08-15 | soc/mediatek/mt8183: Add DSI driver | Hung-Te Lin |
2019-08-09 | soc/mediatek/mt8183: Add display controller driver | Yongqiang Niu |
2019-08-07 | mediatek/mt8183: Add I2C driver code | Qii Wang |
2019-07-23 | mediatek/mt8183: Add md power-off flow | Yanjie Jiang |
2019-07-22 | soc/mediatek/mt8183: Support SSPM | Erin Lo |
2019-07-21 | mediatek/mt8183: Calibrate RTC eosc clock | Ran Bi |
2019-07-11 | mediatek: Fill in input_hertz to coreboot table | Tristan Shieh |
2019-07-07 | mediatek/mt8183: update dcxo output buffer setting | Weiyi Lu |
2019-07-06 | mediatek/mt8183: Enable RTC eosc calibration feature to save power | Ran Bi |
2019-06-21 | mediatek/mt8183: enable DDR low power feature | mtk11195 |
2019-06-21 | mediatek/mt8183: Add infra group DCM setting | Weiyi Lu |
2019-06-21 | mediatek: Add SPI tick_dly setting | Mengqi Zhang |
2019-06-21 | mediatek/mt8183: Add SPI GPIO driving setting | Mengqi Zhang |
2019-06-21 | mediatek/mt8183: Add efuse calibration in auxadc | jg_poxu |
2019-06-21 | mediatek/mt8183: Calibrate vsim2 to 2.7 V | Hsin-Hsiung Wang |
2019-04-29 | mediatek/mt8183: Set CPU frequency to 1417MHz | Tristan Shieh |
2019-04-24 | mediatek/mt8183: Set CPU frequency to 1989MHz | Tristan Shieh |
2019-04-02 | mediatek/mt8183: Fix RTC initialization flow | Ran Bi |
2019-03-16 | src: Drop unused '#include <halt.h>' | Elyes HAOUAS |
2019-03-08 | coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) | Julius Werner |
2019-03-07 | security/tpm: Fix TCPA log feature | Philipp Deppenwiese |
2019-02-28 | mediatek/mt8183: Add RTC support | Ran Bi |
2019-02-25 | security/vboot: Add measured boot mode | Philipp Deppenwiese |
2019-02-21 | mediatek/mt8183: Support gpio eh and rsel setting for I2C | jg_poxu |
2019-02-05 | bootmem: add new memory type for BL31 | Ting Shen |
2019-01-24 | mediatek/mt8183: Move some initialization into mt8183_early_init | You-Cheng Syu |
2019-01-03 | mediatek/mt8183: Add DDR driver of runtime config part | Huayang Duan |
2018-12-11 | mediatek/mt8183: Add DDR driver of tx rx window perbit cal part | Huayang Duan |
2018-12-05 | mediatek: Share GPIO external interrupts (EINT) code among similar SoCs | Chuanjia Liu |
2018-11-29 | mediatek/mt8183: Add DDR driver of rx dqs gating calibration part | Huayang Duan |
2018-11-29 | mediatek/mt8183: Add MT6358 PMIC support | Hsin-Hsiung Wang |
2018-11-29 | mediatek/mt8183: Add PMIC wrapper support | Hsin-Hsiung Wang |
2018-11-08 | mediatek/mt8183: Add DDR driver of cmd bus training part | Huayang Duan |
2018-11-08 | mediatek/mt8183: Add DDR driver of pre-calibration part | Huayang Duan |
2018-11-05 | mediatek/mt8183: Add DDR driver of software impedance part | Huayang Duan |
2018-11-02 | mediatek/mt8183: Add AUXADC driver | Po Xu |
2018-10-26 | mediatek/mt8183: Correct MPU ctrl register address | Huayang Duan |
2018-10-24 | mediatek/mt8183: Initialize DRAM with a sequence in constant array | Huayang Duan |
2018-10-18 | mediatek/mt8183: Add EMI init for DDR driver init | Huayang Duan |
2018-10-18 | mediatek/mt8183: Add register definitions of DRAM controller | Tristan Shieh |
2018-10-17 | mediatek/mt8183: Add USB support | Jumin Li |
2018-10-10 | mediatek/mt8183: Init PLLs for DRAM | Tristan Shieh |
2018-07-27 | mediatek/mt8183: Add SPI support | mengqi.zhang |