summaryrefslogtreecommitdiff
path: root/src/soc/mediatek/mt8183/include
AgeCommit message (Expand)Author
2021-01-15soc/mediatek/mt8183: Support byte mode and single rank DDRShaoming Chen
2021-01-07soc/mediatek: rtc: Use `bool` as return typeYidi Lin
2020-12-28soc/mediatek/mt8192: add rtc MT6359P driverYuchen Huang
2020-12-10soc/mediatek/mt8183: Add DRAM_DMA sectionYidi Lin
2020-11-20soc/mediatek: Move auxadc driver from MT8183 to commonPo Xu
2020-09-25soc/mediatek/mt8183: Enable CA perbit mechanismHuayang Duan
2020-09-16soc/mediatek: move power status bits under each chipWeiyi Lu
2020-09-10soc/mediatek: Drop unneeded empty linesElyes HAOUAS
2020-09-01{include,mb,soc,sb,vendorcode}: Make hexadecimal notation consistentSubrata Banik
2020-08-06soc/mediatek/mt8183: Add ddr geometry to support 6GB, 8GB DDR bootupHuayang Duan
2020-08-06soc/mediatek/mt8183: Adjust tRFCab and tRFCpb by the density valueHuayang Duan
2020-07-26src/soc/mediatek: Add include <types.h>Elyes HAOUAS
2020-06-13treewide: Add Kconfig variable MEMLAYOUT_LD_FILEFurquan Shaikh
2020-06-02src: Remove redundant includesElyes HAOUAS
2020-05-20soc/mediatek/mt8183: Set CA and DQ vref range to correct valueHuayang Duan
2020-05-13soc/mediatek: improve ca53 frequency change procedureWeiyi Lu
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-06treewide: replace GPLv2 long form headers with SPDX headerPatrick Georgi
2020-04-05soc/mediatek: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-31security/vboot: Decouple measured boot from verified bootBill XIE
2020-03-18soc: Remove copyright noticesPatrick Georgi
2020-03-06soc/mediatek/mt8183: Improve the DRAMC runtime config flowHuayang Duan
2020-03-06soc/mediatek/mt8183: Do TX tracking for DRAM DVFS featureHuayang Duan
2019-11-18include: Make stdbool.h a separate fileJulius Werner
2019-11-16soc/mediatek/mt8183: Get more space for PreRAM memconsoleHung-Te Lin
2019-11-14lib/fmap: Add optional pre-RAM cacheJulius Werner
2019-11-01soc/{mediatek,sifive}: Remove unused 'include <arch/barrier.h>'Elyes HAOUAS
2019-10-31soc/mediatek/mt8183: Disable DRAM DVFS in recovery modeYu-Ping Wu
2019-10-28soc/mediatek/mt8183: Pass MR values as function argumentsYu-Ping Wu
2019-10-24soc/mediatek/mt8183: Improve DRAM calibration logsYu-Ping Wu
2019-10-21src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>'Elyes HAOUAS
2019-10-20src: Remove unused 'include <string.h>'Elyes HAOUAS
2019-10-18soc/mediatek/mt8183: Pass impedance data as a function argumentYu-Ping Wu
2019-10-18soc/mediatek/mt8183: Run calibration with multiple frequencies for DVFS switchHuayang Duan
2019-10-18soc/mediatek/mt8183: Allow modifying vddq voltageHsin-Hsiung Wang
2019-10-18soc/mediatek/mt8183: Allow modifying vdram1 voltageHsin-Hsiung Wang
2019-10-18soc/mediatek/mt8183: Share console for calibration blob outputHung-Te Lin
2019-10-17soc/mediatek/mt8183: Refactor DRAM init by bit fields APIHung-Te Lin
2019-10-17soc/mediatek/mt8183: Handle memory test failureYu-Ping Wu
2019-10-09soc/mediatek/mt8183: Change argument type of mt_set_emiYu-Ping Wu
2019-10-09soc/mediatek/mt8183: Run DRAM full calibrationHuayang Duan
2019-10-09soc/mediatek/mt8183: Use cached calibration result for faster bootupHuayang Duan
2019-10-09soc/mediatek/mt8183: Add the shared 'dramc_param' moduleYu-Ping Wu
2019-10-02mediatek/mt8183: Rename fields of struct sdram_paramsYu-Ping Wu
2019-10-01mediatek/mt8183: Allow modifying vcore voltageHsin-Hsiung Wang
2019-09-30mediatek/mt8183: Init SPM driverDawei Chien
2019-09-24mediatek/mt8183: Use different DRAM frequencies for eMCP DDRHuayang Duan
2019-09-20mediatek/mt8183: Support more DRAM frequency bootupHuayang Duan
2019-09-20mediatek/mt8183: Implement the dramc init settingHuayang Duan
2019-09-04mediatek/mt8183: postpone dcxo low power mode settingWeiyi Lu
2019-08-21mediatek/mt8183: add scp voltage initializationHsin-Hsiung Wang
2019-08-21mediatek/mt8183: Enlarge PRERAM_CBFS_CACHE regionTristan Shieh
2019-08-21mediatek/mt8183: Overlap decompressor, verstage and romstageTristan Shieh
2019-08-15soc/mediatek/mt8183: Add DSI driverHung-Te Lin
2019-08-09soc/mediatek/mt8183: Add display controller driverYongqiang Niu
2019-08-07mediatek/mt8183: Add I2C driver codeQii Wang
2019-07-23mediatek/mt8183: Add md power-off flowYanjie Jiang
2019-07-22soc/mediatek/mt8183: Support SSPMErin Lo
2019-07-21mediatek/mt8183: Calibrate RTC eosc clockRan Bi
2019-07-11mediatek: Fill in input_hertz to coreboot tableTristan Shieh
2019-07-07mediatek/mt8183: update dcxo output buffer settingWeiyi Lu
2019-07-06mediatek/mt8183: Enable RTC eosc calibration feature to save powerRan Bi
2019-06-21mediatek/mt8183: enable DDR low power featuremtk11195
2019-06-21mediatek/mt8183: Add infra group DCM settingWeiyi Lu
2019-06-21mediatek: Add SPI tick_dly settingMengqi Zhang
2019-06-21mediatek/mt8183: Add SPI GPIO driving settingMengqi Zhang
2019-06-21mediatek/mt8183: Add efuse calibration in auxadcjg_poxu
2019-06-21mediatek/mt8183: Calibrate vsim2 to 2.7 VHsin-Hsiung Wang
2019-04-29mediatek/mt8183: Set CPU frequency to 1417MHzTristan Shieh
2019-04-24mediatek/mt8183: Set CPU frequency to 1989MHzTristan Shieh
2019-04-02mediatek/mt8183: Fix RTC initialization flowRan Bi
2019-03-16src: Drop unused '#include <halt.h>'Elyes HAOUAS
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
2019-03-07security/tpm: Fix TCPA log featurePhilipp Deppenwiese
2019-02-28mediatek/mt8183: Add RTC supportRan Bi
2019-02-25security/vboot: Add measured boot modePhilipp Deppenwiese
2019-02-21mediatek/mt8183: Support gpio eh and rsel setting for I2Cjg_poxu
2019-02-05bootmem: add new memory type for BL31Ting Shen
2019-01-24mediatek/mt8183: Move some initialization into mt8183_early_initYou-Cheng Syu
2019-01-03mediatek/mt8183: Add DDR driver of runtime config partHuayang Duan
2018-12-11mediatek/mt8183: Add DDR driver of tx rx window perbit cal partHuayang Duan
2018-12-05mediatek: Share GPIO external interrupts (EINT) code among similar SoCsChuanjia Liu
2018-11-29mediatek/mt8183: Add DDR driver of rx dqs gating calibration partHuayang Duan
2018-11-29mediatek/mt8183: Add MT6358 PMIC supportHsin-Hsiung Wang
2018-11-29mediatek/mt8183: Add PMIC wrapper supportHsin-Hsiung Wang
2018-11-08mediatek/mt8183: Add DDR driver of cmd bus training partHuayang Duan
2018-11-08mediatek/mt8183: Add DDR driver of pre-calibration partHuayang Duan
2018-11-05mediatek/mt8183: Add DDR driver of software impedance partHuayang Duan
2018-11-02mediatek/mt8183: Add AUXADC driverPo Xu
2018-10-26mediatek/mt8183: Correct MPU ctrl register addressHuayang Duan
2018-10-24mediatek/mt8183: Initialize DRAM with a sequence in constant arrayHuayang Duan
2018-10-18mediatek/mt8183: Add EMI init for DDR driver initHuayang Duan
2018-10-18mediatek/mt8183: Add register definitions of DRAM controllerTristan Shieh
2018-10-17mediatek/mt8183: Add USB supportJumin Li
2018-10-10mediatek/mt8183: Init PLLs for DRAMTristan Shieh
2018-07-27mediatek/mt8183: Add SPI supportmengqi.zhang
2018-07-26mediatek/mt8183: Enable bootblock self-decompressionHung-Te Lin
2018-07-20mediatek/mt8183: Add GPIO supportPo Xu
2018-07-11mediatek/mt8183: add PLL and clock init supportWeiyi Lu
2018-07-11mediatek/mt8183: Add MMU operation supportTristan Shieh