Age | Commit message (Collapse) | Author |
|
The gpio_common.h needs EINT_BASE from addressmap.h.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I20834e38343410526da0a489fed907acbf479d02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Add PLL and clock init code.
TEST=Boots correctly on MT8192EVB.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: Ia49342c058577e8e107b7e56c867bf21532e40d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I072745933fe141cac26afd044836a564e345d036
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43795
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIT(x) needs <types.h>.
Change-Id: I8e4a7af68a52d82117b8b091fa448bb6ad40ae7d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: If8c7e26ebd954b19bfb8766b26570c6865ad255e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41676
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If panel has too small hfp or hbp, hfp_byte or hbp_byte may become
very small value or negative value. When very small value or
negative value is used, the panel will be scrolling or distorted.
This patch adjusts their values so that they are greater than
the minimum value and keep total of them unchanged.
DSI transfer HBP or HFP, There are some extra packet. ex. packet
header(4byte) and eof(2byte) and (next)hs packet header(4 byte).
the hfp_byte = HFP * BPP - packet header(4byte) and eof(2byte)
and (next)hs packet header(4 byte). So the min hfp_byte is 2 when
HFP = 4.
This is equivalent to the Linux kernel DSI change in:
https://chromium-review.googlesource.com/c/chromiumos/third_party/
kernel/+/2186872
BUG=b:144824303
BRANCH=kukui
TEST=boot damu board with panel CMN N120ACA-EA1 (12" panel and its
hbp only 6), the panel can display without scrolling or
distortions.
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Change-Id: I608c01d41ae93c8d5094647bbf3e0ae4a23d814c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41163
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Unused includes found using following commande:
diff <(git grep -l '#include <stddef.h>' -- src/) <(git grep -l
'size_t\|ssize_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\
|MAYBE_STATIC_NONZERO\|MAYBE_STATIC_BSS\|zeroptr' -- src/)|grep '<'
|grep -v vendor |grep -vF '.h'
Change-Id: Ic54b1db995fe7c61b416fa5e1c4022238e4a6ad5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41150
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I7c3c75eaf2d7a64e7d833541bcf168b93921a142
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also add missing whitespace.
Change-Id: I3361122d5232072e68d018e84219a262acf34001
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
The number of bits per pixel for MIPI_DSI_FMT_RGB666 should be 24
instead of 18.
BRANCH=none
BUG=none
TEST=none
Change-Id: I9574502b2dec4b5a042df3886922ddd8c755da1a
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jitao Shi <jitao.shi@mediatek.corp-partner.google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The extra data transfer in DSI, namely, lpx, hs_prepare, hs_zero,
hs_exit and the sof/eof of DSI packets, will enlarge the line time,
which causes the real frame on dsi bus to be lower than the one
calculated by video timing. Therefore, hfp_byte is reduced by d_phy to
compensate the increase in time by the extra data transfer. However, if
hfp_byte is not large enough, the hsync period will be increased on DSI
data, leading to display scrolling in firmware screen.
To avoid this situation, this patch changes the DSI Tx driver to reduce
both hfp_byte and hbp_byte, with the amount proportional to hfp and hbp,
respectively. Refer to kernel's change in CL:1915442.
Also rename 'phy_timing' to 'timing' to sync with kernel upstream.
Since the phy timing initialization sequence has been corrected, the m
value adjustment in the analogix driver can be removed.
BUG=b:144824303
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
TEST=Boots and sees firmware screen on krane and juniper
TEST=No scrolling issue on juniper AUO and InnoLux panels
Change-Id: I10a4d8a4fb41c309fa1917cf1cdf19dabed98227
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
When configuring MIPI DSI Tx, the value of pcw was calculated from data
rate in MHz, leading to loss of precision. This patch changes to use
data rate in Hz for the calculation so that the resulting value should
be consistent with the one in kernel (CL:1786327).
In addition, change the type of data rate to u32, and calculation of
data rate from pixel clock is changed to use DIV_ROUND_UP for
consistency with kernel (CL:1761843).
Also remove unused variable txdiv.
BRANCH=kukui
BUG=b:149051882
TEST=emerge-jacuzzi coreboot
TEST=No scrolling issue on Juniper AUO and InnoLux panels
Change-Id: I23220d446833b956431006027bbc8cb20fc696a5
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38827
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I63b95144f2022685c60a1bd6de5af3c1f059992e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37828
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I83322e246fe81b97188be17a3fdda16d36df0678
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33688
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibf91c35aa389a91116463616a778212bb386756e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34230
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch changes all existing instances of clrsetbits_leXX() to the
new endian-independent clrsetbitsXX(), after double-checking that
they're all in SoC-specific code operating on CPU registers and not
actually trying to make an endian conversion.
This patch was created by running
sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g'
across the codebase and cleaning up formatting a bit.
Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Change-Id: I2e79ff3352fe974a070b7b3f5e4b5570ed2b294c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This adds a common cbmem_top implementation to all coreboot target.
In romstage a static variable will be used to cache the result of
cbmem_top_romstage.
In ramstage if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is set a global variable
needs to be populated by the stage entry with the value passed via the
calling arguments. if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is not set the
same implementation as will be used as in romstage.
Change-Id: Ie767542ee25483acc9a56785ce20a885e9a63098
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add dphy reset after setting lanes number to avoid dphy fifo error.
BUG=b:139150763
BRANCH=kukui
TEST=Boots correctly on kukui
Change-Id: Ib83576f3700ef98c90f0b4dd101dcaa237d562f9
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
To fix MIPI D-PHY test failure, the hs-prepare should be less than
LimitMin from spec, and we have to enlarge TEOT margin.
BUG=b:138344447
BRANCH=kukui
TEST=Boots correctly on kukui
Change-Id: If91e7a546866299f02432be27fe778be5d7bdc5f
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Initialize the input_hertz and uart_pci_addr fields of the lb_serial
struct to prevent later undefined reads in lb_add_serial(). This was
done for exynos5420 in commit ff94e00362 (soc/samsung/exynos5420/uart.c:
Init new serial struct variables), and this patch finishes the rest.
Note that not all of the drivers can have the UART PCI address
configured at build time, so a follow-up patch will be needed to correct
those ones.
Change-Id: I733bc8185e2f2d28a9823495b53d6b09dce4deb1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1354778
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34548
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some USB 3.0 devices fail to be enumerated after USB reset, and xhci
port status register shows the device is disconnected. After measuring
the USB signal, we found that the USB disconnect threshold was lower and
that the disconnect event was triggered unexpectedly.
USB designers suggest changing discth to 15.
BUG=b:122047652
TEST=emerge-kukui coreboot chromeos-bootimage
Change-Id: I0e8556035b49d693a42cbe1099a6882a1c0ed0d1
Signed-off-by: Changqi Hu <changqi.hu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Some boards (e.g., Kukui) need GPIO based CS for SPI0. This patch
changes the pinmux and binds the pins to the correponding SPIs.
When using GPIO based SPI CS, we need to manually make CS log/high
before/after SPI transactions.
BUG=b:132311067
BRANCH=none
TEST=Verified that b/132311067 is irreproducible
Change-Id: I61653fb19242b6ee6be9a45545a8b66e5c9c7cad
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Id8918f40572497b068509b5d5a490de0435ad50b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The fixed size of init command in lcm_init_table is wasting lots of
space and we should change to packed array since the command buffer
already provides length information.
With this change, BOE panel init commands have been reduced from 4848
bytes to 1309 bytes.
BUG=b:80501386,b:117254947
TEST=emerge-kukui coreboot chromeos-bootimage; Boots properly
Change-Id: I359dde8e6f2e1c0983f4677193bb47a7ae497ca6
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34778
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The MT8183 display serial interface (DSI) is based on MIPI
Alliance Specification, supporting high-speed serial data
transfer between host processor and peripheral devices such
as display modules.
DSI supports both video mode and command mode data transfer
defined in MIPI spec, and it also provides bidirectional
transmission with low-power mode to receive messages from
the peripheral.
Reference: MT8183 Application Processor Functional Spec,
6.7 Display Serial Interface (DSI)
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ic413f524ca0b36f0b01f723a71fe9745e2710cd2
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
For systems with real MIPI panels (8173/oak was using PS8640 eDP
bridge), we have to send DCS commands to initialize panel.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Ie7c824873465ac82a95bcb0ed67b8b9866987008
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34773
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The video timing should be based on PHY timing. Some values can be
ignored on 8173 because of fixed values in PHY but should be calculated
for newer platforms like 8183.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Id3ad2edc08787414a74188f5050460e98222caf4
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The PHY timing should be calculated by data rate (Mbps). However for
8173 some values were hard-coded so we want to introduce a new
mtk_phy_timing structure and a weak function mtk_dsi_override_phy_timing
that allows per-SOC customization to apply PHY timings.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: I1176ca06dda026029ff431aca7f9e21479eed670
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The only platform-specific difference in mtk_dsi_phy_clk_setting is how
to configure MIPI TX because those registers (and logic) are quite
different across different SOCs.
The calculation of data rate is actually the same so we should isolate
it and move to common, and rename mtk_dsi_phy_clk_setting to a better
name as mtk_dsi_configure_mipi_tx.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: I894dc2c4c053267debf5a58313b2bb489bcf5f3a
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The 'bpp' was referred to both 'bits per pixel' and 'bytes per pixel' in
MTK DSI driver and should be corrected. By this change we now always
consider 'bpp' as 'bits per pixel', and rename the variables for other
cases.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Ibd405220b73859e5592c68f498af07eef8d7edbc
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34770
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DSI initialization is almost the same for 8173 and 8183, so we want
to move most of common functions into common/dsi.c.
The major board-specific functions left are:
- reset (controller register has different format)
- pin_drv_ctrl (8183 does not need this)
BUG=b:80501386,b:117254947
TEST=make -j # board=oak (mt8173)
Change-Id: I8d4369a3c84db551287a9c9d1b22f552c5f7518d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34769
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move those will be shared by other MTK SOCs (for example, MT8183) to
common/ddp.c.
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Oak
Change-Id: Ie5709ab6e263caa21fdf7e799dc2ee884ffaf800
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Refactor I2C code which will be reused among similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=emerge-elm coreboot
Change-Id: I407d5e2a9eb29562b40bb300e39f206a94afe76c
Signed-off-by: qii wang <qii.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Also including <types.h>, is supposed to provide stdint and stddef.
Change-Id: Id6d881055826044d04843ba165641131b9111342
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Set input_hertz to 26 MHz.
BUG=b:134351649
BRANCH=none
TEST=emerge-kukui coreboot; emerge-elm coreboot
Change-Id: I7f9c329ae5d610f2516e60f06b2ac96ebbeaa897
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
When system shuts down, RTC enable eosc calibration feature to save
power. Then coreboot RTC driver needs to call rtc_enable_dcxo function
at every boot to switch RTC clock source to dcxo.
BUG=b:128467245
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Iee21e7611df8959cbbc63b6e6655cfb462147748
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add spi tick_dly setting for high-speed spi xfer.
BUG=b:80501386
BRANCH=none
TEST=emerge-kukui coreboot; emerge-elm coreboot
Change-Id: Ie49fc3efe2a4a6dcdf2a2fc4c91b47e35d4f086e
Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
<types.h> is supposed to provide <stdint.h> and <stddef.h>.
When <types.h> is included, <stdint.h> and/or <stddef.h> is removed.
Change-Id: I2db0a647bc657a3626cb5e78f23e9198e290261a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
Implement mt_pll_raise_ca53_freq() in MT8183 to raise the CPU frequency.
Move the function declaration to common header.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: Ide8d767486d68177fa2bfbcc5b559879eca1bcda
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Ib843eb7144b7dc2932931b9e8f3f1d816bcc1e1a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: David Guckian
|
|
Change-Id: Ie21c390ab04adb5b05d5f9760d227d2a175ccb56
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
GPT4 is a 32-bit timer and the counter of GPT4 will overflow in about
330 seconds (0xffffffff / 13MHz). Timer and delay functions will not
work properly if the counter overflows. To fix that we should use the
64-bit timer (GPT6).
BUG=b:80501386
BRANCH=none
Test=emerge-elm coreboot; emerge-kukui coreboot
Change-Id: I9f080e47253a1b1bab4636a45cb86c8666a25302
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
|
|
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: David Guckian
|
|
Also, extra-lines added or removed and local includes moved down.
Change-Id: I5e739233f3742fd68d537f671642bb04886e3009
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32009
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Fix RTC lpd settings. Rewrite powerkeys after lpd init
to enable low power detect function.
2. Rearrange RTC initialization flow.
3. Add return status for rtc_init.
4. Add log if calling pwrap_write or pwrap_read fail.
5. Increase timeout time to resolve unexpected timeout.
BUG=b:127405695
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I6f26edd6699c2f6d9af80c285b70742b44407136
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
MMIO operations are arch-agnostic so the include
path should not be arch/.
Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I91158452680586ac676ea11c8589062880a31f91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31692
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements RTC initialization.
1. initialization dcxo
2. rtc clock using dcxo 32k
3. export RTC_32K1V8_0 to SOC, export RTC_32K1V8_1 to WLAN
4. rtc register initialization
5. refactor the driver common part
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Icccb9360a507fcbfd865b107cd3630e71c810d55
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/31046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When <symbols.h> was first introduced, it only declared a handful of
regions and we didn't expect that too many architectures and platforms
would need to add their own later. However, our amount of platforms has
greatly expanded since, and with them the need for more special memory
regions. The amount of code duplication is starting to get unsightly,
and platforms keep defining their own <soc/symbols.h> files that need
this as well.
This patch adds another macro to cut down the definition boilerplate.
Unfortunately, macros cannot define other macros when they're called, so
referring to region sizes as _name_size doesn't work anymore. This patch
replaces the scheme with REGION_SIZE(name).
Not touching the regions in the x86-specific <arch/symbols.h> yet since
they don't follow the standard _region/_eregion naming scheme. They can
be converted later if desired.
Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Separate WDT reset function from WDT driver, then we can use the common
WDT driver and have a board-specific reset function on different boards.
In Kukui, we plan to use GPIO HW reset, instead of WDT reset. Add config
"MISSING_BOARD_RESET" in Kukui to pass the build for now.
BUG=b:80501386
BRANCH=none
TEST=emerge-elm coreboot; emerge-kukui coreboot;
Change-Id: Ica07fe3a027cd7e9eb6d10202c3ef3ed7bea00c2
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/31121
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refactor GPIO EINT code which can be reused among similar SoCs.
BUG=b:80501386
BRANCH=none
TEST=emerge-elm coreboot; emerge-kukui coreboot
Change-Id: Ib01b43cf1aa4082d7d968fe1ef82f75e8cf05b8b
Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/29837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This removes CEIL_DIV and div_round_up() altogether and
replace it by DIV_ROUND_UP defined in commonlib/helpers.h.
Change-Id: I9aabc3fbe7834834c92d6ba59ff0005986622a34
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Refactor PMIC wrapper code which will be reused among similar SoCs.
Move reusable code into the common folder.
BUG=b:80501386
BRANCH=none
TEST=emerge-elm coreboot
Change-Id: I25acb6da49e72748d856804ef4f97e9ec3bef72d
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/29420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Note, MT8183 didn't select HAVE_HARD_RESET before. So it might still
need an update.
Change-Id: Ic850f2775ada5e6e543ffb92aaa033b9209596f5
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Refactor USB code which will be reused among similar SoCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: I06fefb4149a489be991e13ddf624082d11e31765
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/28786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Its spreading copies got out of sync. And as it is not a standard header
but used in commonlib code, it belongs into commonlib. While we are at
it, always include it via GCC's `-include` switch.
Some Windows and BSD quirk handling went into the util copies. We always
guard from redefinitions now to prevent further issues.
Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Refactor memory test code which will be reused among similar SoCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: I800aa9a73f0b4588f46a98c964e2794bdf04f09d
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/28436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Julius Werner <jwerner@google.com>
|
|
This patch changes the mapping of SRAM from non-secure to secure.
Without this patch, mmu_config_range() can not work when MMU is
enabled. The new config is still in non-secure cache since TTB section
is allocated in SRAM which is mapped as non-secure.
BUG=b:80501386
TEST=Boots correctly on Kukui and Elm
Change-Id: Ia5b8716cfcca64d1d716a177225ea2f7ac2920a6
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Refactor SPI code which will be reused amon similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: If5a6c554dc8361e729cf5c464325b97b2bfb7098
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Refactor GPIO code which will be reused among similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: Icdd1f2a1dd1bd64a7218bf9c63bd4a0af1acbcc0
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Refactor PLL code which will be reused among similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: I11f044fbef93d4f5f4388368c510958d2b0ae66c
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27305
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refactor MMU operation code which will be reused among similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: Id8173da0a02e57e863263fcd89c91a9c089e8a0f
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Using common mtcmos code to power on audio and display modules in SOC.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui. Passes the status check at the end of
mtcmos_power_on()
Change-Id: I41f16ba36432a8bbc47793cec2979753c9f84b43
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Move mtcmos code which can be reused into a common directory under
soc/mediatek.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: I92b138890424b4f4a68cdb00bf2326eef9cd87b7
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27029
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move watchdog timer (WDT) code which can be reused into a common
directory under soc/mediatek.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: Icbeb04f775c3c0fdc18dd198df8591f5c4b6ddce
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27025
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves uart, timer and cbmem code which can be reused into a
common directory under soc/mediatek.
BUG=b:80501386
BRANCH=none
TEST=the refactored code works fine on the new platform (with the rest
of the patches applied) and Elm platform
Change-Id: I5210149b324947ee90f1a481b42f0e2e1f7cfc25
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/26658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|