summaryrefslogtreecommitdiff
path: root/src/soc/mediatek/common/dsi.c
AgeCommit message (Collapse)Author
2021-01-01soc/mediatek: dsi: Fix EoTp flagShaoming Chen
SoC will transmit the EoTp (End of Transmission packet) when MIPI_DSI_MODE_EOT_PACKET flag is set. Enabling EoTp will make the line time larger, so the hfp and hbp should be reduced to keep line time. BUG=b:168728787 BRANCH=kukui TEST=Display is normal on Kukui Signed-off-by: Shaoming Chen <shaoming.chen@mediatek.corp-partner.google.com> Change-Id: Ifadd0def13cc264e9d39ab9c981fbdc996396bfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/48868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-06-02src: Remove duplicated includesElyes HAOUAS
Change-Id: If8c7e26ebd954b19bfb8766b26570c6865ad255e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41676 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/mediatek: dsi: adjust hfp_byte and hbp_byte if too smallPaul Ma
If panel has too small hfp or hbp, hfp_byte or hbp_byte may become very small value or negative value. When very small value or negative value is used, the panel will be scrolling or distorted. This patch adjusts their values so that they are greater than the minimum value and keep total of them unchanged. DSI transfer HBP or HFP, There are some extra packet. ex. packet header(4byte) and eof(2byte) and (next)hs packet header(4 byte). the hfp_byte = HFP * BPP - packet header(4byte) and eof(2byte) and (next)hs packet header(4 byte). So the min hfp_byte is 2 when HFP = 4. This is equivalent to the Linux kernel DSI change in: https://chromium-review.googlesource.com/c/chromiumos/third_party/ kernel/+/2186872 BUG=b:144824303 BRANCH=kukui TEST=boot damu board with panel CMN N120ACA-EA1 (12" panel and its hbp only 6), the panel can display without scrolling or distortions. Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com> Change-Id: I608c01d41ae93c8d5094647bbf3e0ae4a23d814c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41163 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-05soc/mediatek: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I7c3c75eaf2d7a64e7d833541bcf168b93921a142 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-18soc: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-02-17soc/mediatek: dsi: Correct bits_per_pixel for MIPI_DSI_FMT_RGB666Yu-Ping Wu
The number of bits per pixel for MIPI_DSI_FMT_RGB666 should be 24 instead of 18. BRANCH=none BUG=none TEST=none Change-Id: I9574502b2dec4b5a042df3886922ddd8c755da1a Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jitao Shi <jitao.shi@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-17soc/mediatek: dsi: reduce the hbp and hfp for phy timingJitao Shi
The extra data transfer in DSI, namely, lpx, hs_prepare, hs_zero, hs_exit and the sof/eof of DSI packets, will enlarge the line time, which causes the real frame on dsi bus to be lower than the one calculated by video timing. Therefore, hfp_byte is reduced by d_phy to compensate the increase in time by the extra data transfer. However, if hfp_byte is not large enough, the hsync period will be increased on DSI data, leading to display scrolling in firmware screen. To avoid this situation, this patch changes the DSI Tx driver to reduce both hfp_byte and hbp_byte, with the amount proportional to hfp and hbp, respectively. Refer to kernel's change in CL:1915442. Also rename 'phy_timing' to 'timing' to sync with kernel upstream. Since the phy timing initialization sequence has been corrected, the m value adjustment in the analogix driver can be removed. BUG=b:144824303 BRANCH=kukui TEST=emerge-jacuzzi coreboot TEST=Boots and sees firmware screen on krane and juniper TEST=No scrolling issue on juniper AUO and InnoLux panels Change-Id: I10a4d8a4fb41c309fa1917cf1cdf19dabed98227 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-17soc/mediatek: dsi: Increase pcw precisionYu-Ping Wu
When configuring MIPI DSI Tx, the value of pcw was calculated from data rate in MHz, leading to loss of precision. This patch changes to use data rate in Hz for the calculation so that the resulting value should be consistent with the one in kernel (CL:1786327). In addition, change the type of data rate to u32, and calculation of data rate from pixel clock is changed to use DIV_ROUND_UP for consistency with kernel (CL:1761843). Also remove unused variable txdiv. BRANCH=kukui BUG=b:149051882 TEST=emerge-jacuzzi coreboot TEST=No scrolling issue on Juniper AUO and InnoLux panels Change-Id: I23220d446833b956431006027bbc8cb20fc696a5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38827 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-04Change all clrsetbits_leXX() to clrsetbitsXX()Julius Werner
This patch changes all existing instances of clrsetbits_leXX() to the new endian-independent clrsetbitsXX(), after double-checking that they're all in SoC-specific code operating on CPU registers and not actually trying to make an endian conversion. This patch was created by running sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g' across the codebase and cleaning up formatting a bit. Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-23soc/mediatek/mt8183: add dphy reset after setting lanes numberJitao Shi
Add dphy reset after setting lanes number to avoid dphy fifo error. BUG=b:139150763 BRANCH=kukui TEST=Boots correctly on kukui Change-Id: Ib83576f3700ef98c90f0b4dd101dcaa237d562f9 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-23soc/mediatek/mt8183: fine tune the phy timingJitao Shi
To fix MIPI D-PHY test failure, the hs-prepare should be less than LimitMin from spec, and we have to enlarge TEOT margin. BUG=b:138344447 BRANCH=kukui TEST=Boots correctly on kukui Change-Id: If91e7a546866299f02432be27fe778be5d7bdc5f Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-15soc/mediatek: Change DSI init commands to take flexible length arrayHung-Te Lin
The fixed size of init command in lcm_init_table is wasting lots of space and we should change to packed array since the command buffer already provides length information. With this change, BOE panel init commands have been reduced from 4848 bytes to 1309 bytes. BUG=b:80501386,b:117254947 TEST=emerge-kukui coreboot chromeos-bootimage; Boots properly Change-Id: I359dde8e6f2e1c0983f4677193bb47a7ae497ca6 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34778 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15soc/mediatek/mt8183: Add DSI driverHung-Te Lin
The MT8183 display serial interface (DSI) is based on MIPI Alliance Specification, supporting high-speed serial data transfer between host processor and peripheral devices such as display modules. DSI supports both video mode and command mode data transfer defined in MIPI spec, and it also provides bidirectional transmission with low-power mode to receive messages from the peripheral. Reference: MT8183 Application Processor Functional Spec, 6.7 Display Serial Interface (DSI) BUG=b:80501386,b:117254947 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ic413f524ca0b36f0b01f723a71fe9745e2710cd2 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-15soc/mediatek: dsi: Support sending MIPI init commandsHung-Te Lin
For systems with real MIPI panels (8173/oak was using PS8640 eDP bridge), we have to send DCS commands to initialize panel. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: Ie7c824873465ac82a95bcb0ed67b8b9866987008 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34773 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15soc/mediatek: dsi: Refactor video timing calculationHung-Te Lin
The video timing should be based on PHY timing. Some values can be ignored on 8173 because of fixed values in PHY but should be calculated for newer platforms like 8183. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: Id3ad2edc08787414a74188f5050460e98222caf4 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-14soc/mediatek: dsi: Refactor PHY timing calculationHung-Te Lin
The PHY timing should be calculated by data rate (Mbps). However for 8173 some values were hard-coded so we want to introduce a new mtk_phy_timing structure and a weak function mtk_dsi_override_phy_timing that allows per-SOC customization to apply PHY timings. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: I1176ca06dda026029ff431aca7f9e21479eed670 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-13soc/mediatek: dsi: Refactor MIPI TX configurationHung-Te Lin
The only platform-specific difference in mtk_dsi_phy_clk_setting is how to configure MIPI TX because those registers (and logic) are quite different across different SOCs. The calculation of data rate is actually the same so we should isolate it and move to common, and rename mtk_dsi_phy_clk_setting to a better name as mtk_dsi_configure_mipi_tx. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: I894dc2c4c053267debf5a58313b2bb489bcf5f3a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-13soc/mediatek: dsi: Unify format to bpp conversionHung-Te Lin
The 'bpp' was referred to both 'bits per pixel' and 'bytes per pixel' in MTK DSI driver and should be corrected. By this change we now always consider 'bpp' as 'bits per pixel', and rename the variables for other cases. BUG=b:80501386,b:117254947 TEST=make -j # board = oak and boots Change-Id: Ibd405220b73859e5592c68f498af07eef8d7edbc Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34770 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-13soc/mediatek: Create common DSI driver from mt8173Hung-Te Lin
The DSI initialization is almost the same for 8173 and 8183, so we want to move most of common functions into common/dsi.c. The major board-specific functions left are: - reset (controller register has different format) - pin_drv_ctrl (8183 does not need this) BUG=b:80501386,b:117254947 TEST=make -j # board=oak (mt8173) Change-Id: I8d4369a3c84db551287a9c9d1b22f552c5f7518d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34769 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>