summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2022-08-24soc/intel/alderlake/hsphy: Add support for HSPHY firmware loadingMichał Żygowski
BIOS must send the IP_LOAD HECI command to fetch the firmware for CPU PCIe Gen5 and upload it via CPU REG BAR prior FSP Silicon Init. Implementation based on public Slimbootloader's "Silicon/AlderlakePkg/Library/CpuPcieHsPhyInitLib". TEST=Boot MSI PRO Z690-A and see the HSPHY FW is loaded. PCIe x16 Gen3 GPU card started working in the PCIE 5.0 slot. [DEBUG] HECI: Sending Get IP firmware command [DEBUG] HECI: Get IP firmware success. Response: [DEBUG] Payload size = 0x6944 [DEBUG] Hash type used for signing payload = 0x3 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I6c6c11581e3d3d9bab0131fae6ef487cafe98080 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-08-24soc/intel/meteorlake: Enable GPIO 4 bits pad mode configurationJamie Ryu
This enables SOC_INTEL_COMMON_BLOCK_GPIO_PMODE_4BITS to support 4 bits GPIO pad mode to configure native function 8 to 15. BUG=b:239690757 TEST=build and verify pad mode configuration with Meteor Lake mtlrvp Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: Ibf4b13a3d19095d15bf857c7fe4ec0affb54a4e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66391 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-08-24soc/intel/common/gpio: Support 4 bits GPIO pad mode configurationJamie Ryu
Intel GPIO pad supports 4 bits pad mode, PAD_CFG_DW0[13:10] for pins that native function 8 to 15 is assigned. This adds native function definitions from NF8 to NF15 and updates PAD_CFG0_MODE_MASK to support 4 bits pad mode configuration. Since PAD_CFG_DW0[16:13] is reserved for pins that NF8 or higher is not assigned, this change would not cause an issue but Kconfig option is added to minimize an impact and support 4 bits pad mode configuration. BUG=b:239690757 TEST=build and verify pad mode configuration with Meteor Lake mtlrvp Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: Iefd2daa92a86402f2154de2a013ea30f95d98108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-23{sb,soc}/intel: Do not require hda_verb.cAngel Pons
Just use the conditional inclusion through `device/Makefile.inc`. Change-Id: Id363a97460ae2cfe4b10d491d4ef06394eb530c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-08-22soc/intel/alderlake: Perform TME core activation on all CPUsSubrata Banik
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as per Alder Lake Processor EDS. TEST= Able to build and boot Google/Redrix. Dumping MSR 0x9FF on all logical processors shows zero value being set. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I130480d4fba413d47d0d0137932ec1fb041a88d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66753 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-22soc/intel/cmn/cpu: API to set TME core activationSubrata Banik
This patch implements API to program TME core activation MSR 0x9FF. Write zero to TME core activate MSR will translate the TME_ACTIVATE[MK_TME_KEYID_BITS] value into PMH mask register. Note: TME_ACTIVATE[MK_TME_KEYID_BITS] = MSR 0x982 Bits[32-35] TEST=Able to build and boot Google/Redrix. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I48cf8e255b294828ac683ab96eb61ad86578e852 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-21soc/intel: Enable TME based on supported CPU SKU and config optionSubrata Banik
This patch removes the static kconfig being used to fill in TME enable FSP UPD. Instead use`is_tme_supported()` and `CONFIG(INTEL_TME)` to check if the CPU has required TME support rather than hardcoding. TEST=FSP debug log shows `TmeEnable` UPD is set appropriately for the TME-supported CPU SKUs. As per FSP-M debug log: Without this CL, Alder Lake-P CPU SKU without TME support: [SPEW ] TmeEnable = 0x1 With this CL, Alder Lake-P CPU SKU without TME support: [SPEW ] TmeEnable = 0x0 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8aa2922baaf2a49e6e2762d31eaffa7bdcd43b0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66750 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-21soc/intel/common/block/cpu: API to check if TME is supportedSubrata Banik
As per the Alder Lake FAS coreboot shall detect the existence of TME feature by running the CPUID instruction: CPUID leaf 7/sub-leaf 0 Return Value in ECX [bit 13]=1 If TME is supported then only access to TME MSRs are allowed otherwise accessing those MSRs would result in GP#. TEST=Able to detect the existence of TME feature across different Alder Lake and Meteor Lake CPU SKUs. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibd4fcf15a66d27748ac7fbb52b18d7264b901cd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66749 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-21soc/intel: Unravel `INTEL_TME` Kconfig optionAngel Pons
The `INTEL_TME` Kconfig option has a prompt, which means it is meant to be user-configurable. However, it has been selected from Alder Lake and Meteor Lake Kconfig, so `INTEL_TME` cannot be disabled on them. Replace the `select INTEL_TME` statements with default values in order for this option to be user-configurable on all platforms that support it. Change-Id: Ib37c108fcc1004840b82be18fd23c340a68ca748 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66756 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-21intel/systemagent: Align debug outputNico Huber
Output should be easier to read as a table. Change-Id: I32e3e0aab5afd25c0b004d18f64de76445d9a0ed Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-19soc/intel/alderlake: Add support to skip the MBP HOBV Sowmya
This patch adds the support to enable/disable skipping MBP HOB from the devicetree based on mainboard requirement. Only ADL-N FSP has the required support to skip the MBP HOB and enabling it is saving the Boot time. BUG=b:241850107 TEST=Build and boot to verify that the right value has been passed to the FSP. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Iddeb2c652fac9513b14139d6f732d333bbb989d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-18soc/intel/tigerlake/fsp_params.c: Add INT D routing for PEG60Frans Hendriks
Debian 11 reports ´0:6:0 can´t derive routing for PCI INT D´. Use FIXED_INT_PIRQ for INT D to PIRQ routing table. BUG=NA TEST=Boot Debian 11 on Siemens AS_TGL1 and verify no PIRQ error message in ´dmesg´ Change-Id: If38c7b6f664e0f6533e583ce62504281a4092720 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-18Revert "soc/intel/meteorlake: Provide access to IOE through P2SB SBI for TCSS"Subrata Banik
This reverts commit eb80b1efa36c99e485b2604e913c2aa316168eea. Reason for revert: Results into hard hang with serial debug msg inside FSP-S. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8e7cf804828da8939f591eb0770c8daf830c8d94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-08-17soc/intel/apollolake: Add the remaining CSE Firmware Status RegistersSean Rhodes
Add the Shadow Registers from 2 through 5 and print information from them accordingly. All values were taken from Intel document number 571993. Tested on the StarLite Mk III and the correct values are shown: [DEBUG] CSE: IBB Verification Result: PASS [DEBUG] CSE: IBB Verification Done : YES [DEBUG] CSE: Actual IBB Size : 88 [DEBUG] CSE: Verified Boot Valid : FAIL [DEBUG] CSE: Verified Boot Test : NO [DEBUG] CSE: FPF status : FUSED Please note, the values shown are in an error state. This replaces the Fuse check that is done via Heci, as this will only work whilst the CSE is in a normal state. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I8a9e7b329010fae1a2ed9c3fefc9765e617cdfe4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-17soc/intel/apollolake: Enable DPTF & SMBus as it is a required deviceSean Rhodes
coreboot is unable to disable certain devices, whilst many are hidden DPTF and SMBus are not. Set this to enabled chipset so that it is enabled by default. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I85d74179b6fe3c6126566422f82f7b806f80d0c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-17soc/intel/tigerlake: Disable DISPLAY_FSP_VERSION_INFO on IOTFrans Hendriks
Build error for platforms using Intel FSP for TGL_IOT (FSP_TYPE_IOT). File FirmwareVersionInfoHob.h does not exist in Intel FSP TGL IOT package. File FirmwareVersionInfoHob.h is included when DISPLAY_FSP_VERSION_INFO is enabled. Enable this config for non TGL_IOT only. BUG = NA TEST = Verify that DISPLAY_FSP_VERSION_INFO is disabled by default for TGL_IOT configuration (Build Siemens AS_TGL1). Change-Id: Ief5a7222daf6f1658e8dc04f97b4ddc2bcb74905 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66636 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-17soc/intel/common: Update the comments for CSE RX and TX functionsSridhar Siricilla
The patch updates the comments on return values and heci_reset() triggering during error scenarios of heci_receive() and heci_send() functions to reflect the current implementation. Test=Build the code for Gimble Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I6c6c3312602c772147cb315db9ea1753d84a0fb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-17soc/intel/broadwell: Unselect VBOOT_STARTS_IN_ROMSTAGEYu-Ping Wu
Starting vboot earlier in bootblock instead of romstage is usually preferred (smaller root of trust, among other things). Therefore unselect VBOOT_STARTS_IN_ROMSTAGE for broadwell. Also remove the unused BROADWELL_VBOOT_IN_BOOTBLOCK option. Change-Id: If8feea403ee4cd3a16ed8cb0faf9f4ccb34feaaf Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-17Revert "soc/intel/broadwell: Drop vboot support"Yu-Ping Wu
This reverts commit f87489bbae5bb1ae3b17b6a03af9e309769b1f72. Reason for revert: Broadwell actually supports early flash writes. Change-Id: I342aefe464c72a32b41a40062b62d871caa0707b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-17soc/intel/alderlake/acpi: Changing USB ports indexing.Adam Mills
xhci.asl places the SS ports at 11-14, following HS ports 1-10. However, for Nissa, the kernel detects 12 HS ports 1-12 and 4 SS ports at 13-16, resulting in the PLD intended for SS ports 1 and 2 being associated with HS ports 11 and 12. Changing the asl for SS to 13-16 makes locations associate correctly and peering work. BUG=b:234544025 BRANCH=firmware-brya-14505.B TEST=manually verified on Nissa and Brya devices Change-Id: I57aef771a7ff086b71a9e90b81e1a3635f832b2f Signed-off-by: Adam Mills <adamjmills@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66590 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-16soc/intel/alderlake: Fill ucode loading UPD if USE_FSP_MP_INIT enableSubrata Banik
This patch calls into a helper function to fill `2nd microcode loading FSP UPD` if FSP is running CPU feature programming. TEST=Able to build and boot Google/Kano. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8534305e4e973c975ad271b181a2ea767c840ae3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66686 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-16soc/intel/common/cpu: Remove the address-of (`&`) operator usageSubrata Banik
This patch drops explicit usage of the address-of operator ('&') while passing the function pointer (argument 0) to the `mp_run_on_all_cpus` API. Note: It's just cosmetic change without any real difference in the operation. TEST=Able to build and boot Google/Kano where CPU feature programming is successful on all logical processors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I2c77959a76d2240ad1bfb7a9d7b9db7e8aee42f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66685 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-14soc/intel/common/block/cse: Tidy up table in commentAngel Pons
Adjust an ASCII art table so that it looks good: consistent padding and aligned table borders. Change-Id: I26196f969406e03f320256b0c3a337282f636914 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66707 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-14broadwell: Decouple LPDDR3 DQ/DQS maps from `pei_data`Angel Pons
Introduce the `BROADWELL_LPDDR3` Kconfig option along with some wrapper code to allow mainboards using LPDDR3 DRAM to supply the DQ/DQS maps to chipset code without having to use `pei_data`. The only mainboard using LPDDR3 is Google Samus. Change-Id: I0aaf0ace243c03600430c2a7ab6389a7b20cb432 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55812 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-14soc/intel/broadwell: Consolidate SPD handlingAngel Pons
Mainboards do not need to know about `pei_data` to tell northbridge code where to find the SPD data. As done on Haswell, add the `mb_get_spd_map` function and the `struct spd_info` type to retrieve SPD information from mainboard code without having to use `pei_data` in said mainboard code. Unlike Haswell MRC, Broadwell MRC uses all positions of the `spd_data` array, not just the first. The placeholder SPD address for memory-down seems to be different as well. Adapt the existing code to handle these variations. Once complete, the abstraction layer for both MRC binaries will have the same API. Change-Id: I92a05003a319c354675368cae8e34980bd2f9e10 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-08-14broadwell: Move some MRC/refcode settings to devicetreeAngel Pons
There's no generic way to tell whether a mainboard has an EC or not. Making Kconfig symbols for these options seems overkill, too. So, just put them on the devicetree. Also, drop unnecessary assignments when the board's current value is zero, as the struct defaults to zero already. Change-Id: I8d3b352333bea7ea6f7b0f96d73e6c2d7d1a2cfb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55809 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-08-14mb/google/auron: Move SPD file handling to chipsetAngel Pons
The SPD file handling code is generic and can be used on any other mainboard. Move it to chipset scope to enable code reuse. Change-Id: I85b1460ccb82f0c1bf409db4a6b4c9355c25e76d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55808 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-08-14broadwell: Compute channel disable masks at runtimeAngel Pons
Introduce the `SPD_MEMORY_DOWN` macro to indicate that a slot is used with memory-down. This enables computing the channel disable masks as the bits for slots where the SPD address is zero. To preserve current behavior, zero the SPD addresses for memory-down slots afterwards. Change-Id: I75b7be7c72062d1a26cfc7b09b79de62de0a9cea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55807 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13src/mb: Update unlicensable files with the CC-PDDC SPDX IDMartin Roth
These files contain no creative content, and therefore have no copyright. This effectively means that they are in the public domain. This commit updates the unlicensable empty (and effectively empty) files with the CC-PDDX identifier for license compliance scanning. Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Change-Id: I0b76921a32e482b6aed154dddaba368f29ac2207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66497 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13Revert "soc/intel/alderlake: Enable energy efficiency turbo mode"Jeremy Compostella
This reverts commit 844dcb3725fc95df53a7229703f5059d2c36f98e. A power and performance analysis performed on Alder Lake demonstrated that with an EPP (Energy Performance Preference) at 50% along with EET (Energy Efficient Turbo) disabled, the overall SoC performance are similar or better and the SoC uses less power. For instance some browser benchmark results improved by 2% and some multi-core tests by 4% while at the same time power consumption lowered by approximately 7.6%. BRANCH=firmware-brya-14505.B BUG=b:240669428 TEST=verify that ETT is disabled `iotools rdmsr 0 0x1fc' Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: I96a72009aaf96d4237d57f4d5c8b1f41f87174d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66281 Reviewed-by: Zhixing Ma <zhixing.ma@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-12Fix Alder Lake and Raptor Lake Device ID'sMaximilian Brune
- ADP_P_* -> RPP_S_* (got mixed up I guess) - Remove duplicates of ADP_S_ESPI_* - Add infix _ESPI_ to all ADP_S device ID's Document: 619362 Change-Id: Ic18ecbd420fc598f0ef6e3cf38e987ac3ae6067e Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66629 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-12Add missing ADL-S device identificationMaximilian Brune
R680E, Q670E, H610E are the ADL-S IoT variants TEST=Boot ADL-S RVP DDR5 and see silicon info is reported as PCH: AlderLake-S R680E Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I1804994b4b72f0484eabb15323736679d2668078 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-12soc/intel/meteorlake: Provide access to IOE through P2SB SBI for TCSSJohn Zhao
This change provides access to IOE through P2SB Sideband interface for Meteor Lake TCSS functions of pad configuration and Thunderbolt authentication. There is a policy of locking the P2SB access at the end of platform initialization. The tbt_authentication is read from IOM register through IOE P2SB at early silicon initialization phase and its usage is deferred to usb4 driver. BUG=b:213574324 TEST=Built coreboot and validated booting to OS successfully on MTLRVP board. No boot hung was observed. Change-Id: Icd644c945bd293a8b9c4a364aaed99ec4a7c12f9 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-12soc/intel/common: Delete the TBT authenticaton functionJohn Zhao
Delete the Thunderbolt authentication function ioe_tcss_valid_tbt_auth from the common block. Meteor Lake Platform will implement it. BUG=b:213574324 TEST=Built coreboot image successfully. Change-Id: I97a289faa6351fe562f91d8478b72c9403ce88cb Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-12soc/intel/alderlake: Fix DDR5 channel mappingAngel Pons
DDR5 memory modules have two separate 32-bit channels (40-bit on ECC memory modules), and the SPD info refers to one channel: the primary bus width is 32 (or 40) bits and the "DIMM size" is halved. On Alder Lake, there are 2 memory controllers with 4 32-bit channels each for DDR5. FSP has 16 positions to store SPD data, some of which are only used with LPDDR4/LPDDR5. To try to make things less confusing, FSP abstracts the DDR5 channels so that the configuration works like on DDR4. This is done by copying each DIMM's SPD data to the other half-channel. Thus, fix the wrapper parameters for DDR5 accordingly. Tested on AlderLake-P DDR5 RVP (board ID 0x12), both DIMM slots now function properly. Without this patch, only the top slot would work. Change-Id: I5f01cd77388b89ba34d91c2dc5fb843fe9db9826 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Tested-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66608 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-12soc/intel/meteorlake: Have non prefetchable MMIO for IGD BAR0Wonkyu Kim
Enable SOC_INTEL_GFX_NON_PREFETCHABLE_MMIO for MTL to fix guc driver failure. BUG=b:241746156 TEST=boot to OS and check guc driver loading successful Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ifc20935bccdda55db3e57eecd37a4260b3f1a2d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66613 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-12soc/intel/common: Ignore prefetch PCI attribute for IGD BAR0Wonkyu Kim
From Meteorlake, IGD BAR0(GTTMMADR) is changed to 64bit prefetchable. Due to the prefetchable attribute, resource allocation for IGD BAR0 is assigned WC memory and it causes kernel driver failure. For avoiding kernel driver failure, ignore prefetch PCI attribute for IGD BAR0 to assign UC memory. We're working on publishing below information. - IGD BAR0(GTTMMADR) is changed to 64bit prefetchable BAR - GTTMMADDR BAR should be always mapped as UC memory although marked Pre-fetchable. BUG=b:241746156 TEST=boot to OS and check guc driver loading successful Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I76d816d51f32f99c5ebcca54f13ec6d4ba77bba5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66403 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-11src/soc/intel/mtl: Add VPU supportSrinidhi N Kaushik
This change adds support for enabling VPU on MTL SoC. BUG=b:240665069 TEST=build coreboot mtlrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie79b45f34a669b9ff777599cb85217abac6cb74e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2022-08-10soc/intel/tigerlake: Add USBOTG and CrashLog to irq tableFrans Hendriks
FSP reports missing IRQ for devices. Add USBOTG (D20:F1) and CrashLog & Telemetry (D10:F0) to irq_constrain. Bug = N/A TEST = Build and boot Siemens AS-TGL1 Change-Id: Ic02d33045a07a6888ba97d8f2c6fa71bc7e363e8 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-07soc/intel/alderlake: Fix RPL-P 282 15W GT ICC MAXJeremy Compostella
The software used to read the document listing the VR settings turns out to not be perfectly compatible. Indeed, it displays a value of 55A for RPL-P 282 15W GT ICC MAX while the correct value actually is 40A. After a thorough review using the software used to create the document, it is the only value presenting a discrepancy. BRANCH=firmware-brya-14505.B BUG=b:239797178 TEST=build and boot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Iee293c87a66f0cd32714766e3ad81eee1a411723 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-08-07soc/intel/tigerlake: Expose In-Band ECC config to mainboardFrans Hendriks
Support for feature "In-Band ECC" not available for Tiger Lake Similar to Elkhart Lake, Tiger Lake also provides this feature. Ported from Elkhart Lake (CB:55668) Bug = N/A TEST = Build and boot Siemens AS-TGL1 Change-Id: Ie54d5f6a9747fad0105d0f8bf725be611bb8cf60 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-05soc/intel/mtl: Remove deprecated FSP optionSrinidhi N Kaushik
Remove the reference to `CpuCrashLogDevice` UPD since FSP v2304.01 has deprecated this UPD. BUG=b:240665069 TEST=build rex coreboot Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I23223fd7936a60d974229b553de255a7dcf4416b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66357 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-03soc/intel/alderlake: Add config for IoT FSP supportLean Sheng Tan
Add new config FSP_TYPE_IOT to add the IoT FSP option so that respective mainboard Kconfig can use IoT FSP if needed. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I01d891348c039269138e64290ae3d6ec75d3c687 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-03soc/soc/intel: Add UFS device with ref-clk-freq propertyMeera Ravindranath
UFS storage devices require the bRefClkFreq attribute to be set to operate correctly in high speed mode. The correct value is determined by what the SoC / board supports. For the ADL UFS controller, it is 19.2 MHz. a) Introduce a new ACPI property "ref-clk-freq". b) Add support to configure this property using an SoC Kconfig. Kernel patch: https://web.archive.org/web/20220801060732/https://lore.kernel.org/all/ 20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeid/ BUG=b:238262674 TEST=Build,boot Nirwen and dump SSDT entries and check that the kernel correctly parses ref-clk-freq as 19.2 MHz. Scope (\_SB.PCI0) { Device (UFS) { Name (_ADR, 0x0000000000120007) // _ADR: Address Name (_DDN, "UFS Controller") // _DDN: DOS Device Name Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "ref-clk-freq", 0x0124F800 } } }) } } Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Reka Norman <rekanorman@chromium.org> Change-Id: I80c338a8a61f161b0feb6c5a3ca00cf5e0cfb36c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-02soc/intel/alderlake: Configure DDR5 Physical channel width to 64Meera Ravindranath
A DDR5 DIMM internally has two channels each of width 32 bit. But the total physical channel width is 64 bit. BUG=b:180458099 TEST=Boot DDR5 to kernel Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: Ic5e9c58f255bdf86a68ce90a4f853bf4e7c7ccfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52730 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-08-02soc/intel/alderlake: Add IRQ constraints for CPU PCIe portsTim Crawford
Copy the constraint from ADL-S to ADL-P. Fixes the following warning in Linux on System76 oryp9, which has an NVIDIA GPU on the bridge. pcieport 0000:00:01.0: can't derive routing for PCI INT A This, in turn, resolves an IRQ conflict with the PCH HDA device that would cause a stack track on every boot. irq 10: nobody cared (try booting with the "irqpoll" option) <snip> [<00000000bf549647>] azx_interrupt [snd_hda_codec] Disabling IRQ #10 Change-Id: I550c80105ff861d051170ed748149aeb25a545db Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66285 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/intel/alderlake: Add missing TDP and Power Limits for ADL-SMichał Żygowski
Add TDP and Power Limit settings for ADL-S 8+8 150W, 4+0 and 2+0. The System Agent PCI IDs were not present in older 2.1 revision of DOC #619501. Now that the mapping of these IDs to SKUs is known, fill the missing TDPs and Power Limit settings based on DOC #626343. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I23dd8478e60bcc81a1048f2f6e6717dd281d1a69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29soc/intel/alderlake: Set VccIn Aux Imon IccMax for ADL-S 4+0 and 2+0Michał Żygowski
Add missing System Agent PCI IDs for ADL-S 4+0 and 2+0 to configure VccIn Aux Imon IccMax. They were not present in older 2.1 revision of DOC #619501. Based on DOC #619501 rev 2.6. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Idfd57ce9b63db5d5fcc9d4efb8aa27ed7cc6222d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29soc/intel/alderlake/vr_config.c: Add VR params for ADL-SMichał Żygowski
Based on DOC #619501, #634885, #626343. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ib50db521e4d127a773f903b45d4bec5c5cc180d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29intel/pmclib: Avoid PMC ABASE read of SLP_TYP and STATUS in ramstageHarsha B R
The patch updates platform_is_resuming() API such that platform resume state is determined from the saved state (CBMEM) instead of checking PMC registers (PM1_STS & PM1_CNT) as they are getting cleared (before/early) ramstage. coreboot sends DISCONNECT IPC command which times out during resume (S3) if system has servoV4 connected on port0. The issue occurs only during the first cycle of resume (S3) test cycle after cold boot due to side effect of platform_is_resuming() API that is not determining the resume (S3) state correctly in ramstage. PM1_STS and PM1_CNT register gets cleared at the start of ramstage. platform_is_resuming() function was checks the cleared register value and fails the condition of resume (S3) resulting in sending DISCONNECT IPC command. Checking the platform resume state from the CBMEM saved state using acpe_get_sleep_type() function helps cross verify the system previous state at the later part of ramstage. localhost ~ # cbmem -c | grep ERROR [ERROR] EC returned error result code 3 [ERROR] PMC IPC timeout after 1000 ms [ERROR] PMC IPC command 0x200a7 failed [ERROR] pmc_send_ipc_cmd failed [ERROR] Failed to setup port:0 to initial state [ERROR] PMC IPC timeout after 1000 ms [ERROR] PMC IPC command 0x200a7 failed [ERROR] pmc_send_ipc_cmd failed [ERROR] Failed to setup port:1 to initial state [ERROR] GENERIC: 0.0 missing read_resources [ERROR] PMC IPC timeout after 1000 ms [ERROR] PMC IPC command 0xd0 failed [ERROR] PMC: Failed sending PCI Enumeration Done Command BUG=b:227289581 TEST=Verified system boots to OS and verified below tests on Redrix (ADL-P) and Nivviks (ADL-N) 1. coreboot doesn't send the DISCONNECT during S3 resume 2. suspend S3 passes with both suzyq and servoV4 connected 3. After S3 resume, system detects the pen drive with Superspeed 4. After system resumes from S3, hot-plug the pen drive, system detects the pen drive Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I353ab49073bc4b5288943e19a75efa04bd809227 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66126 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/intel/common/sata: Add APL and GLK SATA PCI IDsSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0ae8c6624b79ce6c269244bd1435900d4d7f997a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-07-28soc/intel/alderlake: Add support for more CPU PCIe RP UPDsTim Wawrzynczak
There are 3 more CPU PCIe RP UPDs that are the current code is not setting, and some boards may want to set these, so this patch adds support to set these UPDs. The default values for any existing boards using these UPDs should not change with this patch. The UPDs are: - CpuPcieRpDetectTimeoutMs - CpuPcieRpAspm - CpuPcieRpSlotImplemented Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Id48019f984e8e53ff3ce0c3c23e02dab65112c99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66197 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-28soc/intel/alderlake: Enable LPIT supportJeremy Soller
Add SLP_S0 residency register and enable LPIT support. Change-Id: I45e1fc9df3e782cdaac810af3189c5797b1fe413 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28soc/intel/alderlake: Set Energy Perf Bias appropriate default valueJeremy Compostella
The current "normal" EPB (six) setting resulted in the desired out of box power and performance for several CPU generations. However, a power and performance analysis on Alder Lake and Raptor Lake CPUs demonstrates that this value results in undesirable higher uncore power and that seven is a more appropriate value. Note: the Linux kernel "4ecc933b x86: intel_epb: Allow model specific normal EPB value" patch sets the EPB to 7 for Alder Lake. BRANCH=firmware-brya-14505.B BUG=b:239853069 TEST=verify that EPB is set by coreboot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: I5784656903d4c58bedc5063ee3ef310a99711050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66059 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Cliff Huang <cliff.huang@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-28soc/intel/alderlake: Enable Energy/Performance Bias controlJeremy Compostella
According to document 619503 ADL EDS Vol2, bit 18 of MSR_POWER_CTL must be set to be able to set the Energy/Performance Bias using MSR IA32_ENERGY_PERF_BIAS. Note that since this bit was not set until this patch, the `set_energy_perf_bias(ENERGY_POLICY_NORMAL);' call in `soc_core_init()` was systematically failing. BRANCH=firmware-brya-14505.B BUG=b:239853069 TEST=verify that EPB is set by coreboot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Ic24abdd7f63f4707b8996da4755a26be148efe4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28soc/intel/meteorlake: Fix GPIO reset mapping as per GPIO BWGSubrata Banik
This patch fixes the documentation discrepancy of GPIO reset type between PCH EDS and GPIO BWG. As per GPIO BWG, there are four GPIO reset types in Meteor Lake as below: - Power Good - (Value 00) - Deep - (Value 01) - Host Reset/PLTRST - (Value 10) - Global Reset for GPP - (Value 11) Also, dropped the need for having dedicated reset type for GPIO community 3. As per the MTL EDS, all GPIO communities have the same reset type. BUG=b:213293047 TEST=Able to build and boot Google/Rex without below error msg. [ERROR] gpio_pad_reset_config_override: Logical to Chipset mapping not found Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Id7ea16d89b6f01b00a7b7c52945f6e01e8db6cbd Reviewed-on: https://review.coreboot.org/c/coreboot/+/66155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Will Kim <norwayforest92@gmail.com>
2022-07-28soc/intel/gpio: Add new macro for GPP PAD reset type as `Global Reset`Subrata Banik
This patch introduces a new macro for GPP PAD reset type as `Global Reset` as documented in Alder Lake EDS doc 630603. BUG=b:213293047 TEST=Able to build Google/Kano with this change. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I39428911babc393dd10750801522a00d0b26d3e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-27soc/intel/meteorlake: Use coreboot native event handler for FSP-SSrinidhi N Kaushik
Beginning FSP 2.2 specifications Fsps Config Upd "FspEventHandler" was moved to Fsps Arch Upd. Hence we were not seeing Fsps Debug log was not using coreboot debug library. This change assigns Fspd Arch Upd FspEventHandler with coreboot ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER Kconfig is enabled. Before: Dumping FSPS_UPD - Size: 0x00001510 0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02 0x00 0x00 0x00000010: 0x00 With the fix: [SPEW ] Dumping FSPS_UPD - Size: 0x00001528 [SPEW ] 0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02 [SPEW ] 0x00000010: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [SPEW ] 0x00000020: 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00 0xAA [SPEW ] 0x00000030: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [SPEW ] 0x00000040: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 BUG=b:237263080 TEST=Able to build and boot MTL RVP, verified the FSP-S debug log is using coreboot debug library. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie63258f6427b3da7927a866bc3767f548b16e3e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-07-25Revert "soc/intel/meteorlake: Align TCSS functions through SBI"Subrata Banik
This reverts commit b57d172fbb5265d632c031532fcc2aec156e065a. Reason for revert: Results into hard hang with serial debug msg as below: `[EMERG] Unable to unhide the P2SB device!` Intel team is working towards to fix this issue. BUG=b:239806774 TEST=Able to boot the Intel/MTLRVP with this revert. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic6be37c000afdf4f0c6c22497c233aa0bbc49d48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65500 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-25soc/intel/meteorlake: Choose PCR write to lock GPIO PADSubrata Banik
Set the SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR config on Meteor Lake to instruct Pad Configuration Lock. BUG=b:211573253, b:211950520, b:213596994 TEST=Able to perform GPIO lock programming without error on MTLRVP. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Icd123adb02716149fa51c9e4c987c281f9de2f43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-07-25soc/intel/gpio: Update GPIO Lock configuration recommendationSubrata Banik
This patch updates the GPIO lock configuration recommendation kconfig string to ensure the SoC user can select the correct config as applicable for the SoC. Note: From MTL onwards GPIO lock config can be performed using PCR write (MMIO write) and the GPIO team has confirmed this. BUG=b:213596994 TEST=Able to fix below GPIO lock config error msg on MTL with `SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR` kconfig enabled. [INFO ] Locking pad configuration using SBI [INFO ] gpio_pad_config_lock_using_sbi: Locking pad 73 configuration [ERROR] SBI Failure: Transaction Status = 1 [ERROR] Failed to lock GPIO PAD, response = 1 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Icab1e4849b8e08ee1c695c924599f1513774178f Reviewed-on: https://review.coreboot.org/c/coreboot/+/66113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-25soc/intel/meteorlake: Debug consent is set to 3 (USB3 DbC)Subrata Banik
This patch ensures the debug consent value is matching with the inline comment. TEST=Able to build the Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Icf72eb2aa4064fd78f4f99570a4cf44e41932ec3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66008 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-24intel/common/block/ipu: Add MTL IPU device idWonkyu Kim
TEST=Build mtlrvp and check IPU0 ACPI ojbect from ssdt Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ib5c3d455d272af0e753c775a5fd3f19851b7937d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66056 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-23soc/intel/alderlake: Hide PMC and IOM devicesJeremy Soller
Hide these ACPI device so Windows does not warn about missing device drivers. Change-Id: Iba6cf7a17eefc9f4f247621f6625151f2fd5f3a7 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-23soc/intel/cannonlake: Set MAX_CPUS based on the SoC and PCHFelix Singer
Set the default value for MAX_CPUS in the SoC config and drop it from the mainboards where it is set to those values. Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-22soc/apollolake: Don't select VBNV_CMOS if VBNV_FLASH is enabledSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If8af4657508f00feff8525b0135c7f73c1959965 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-20treewide: Remove unused <cpu/x86/mtrr.h>Elyes Haouas
Change-Id: Ib852d0b2cf4d3cbdf7475bd5493bf2e585a5894a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-20treewide: Remove unused <cpu/x86/msr.h>Elyes Haouas
Change-Id: I187c2482dd82c6c6d1fe1cbda71710ae1a2f54ad Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-20soc/apollolake: Add CSE Firmware Status RegistersSean Rhodes
Add the CSE, General Status and Miscellaneous registers and print information from them accordingly. All values were taken from Intel document number 571993. Tested on the StarLite Mk III and the correct values are shown: [DEBUG] CSE: Working State : 2 [DEBUG] CSE: Manufacturing Mode : NO [DEBUG] CSE: Operation State : 1 [DEBUG] CSE: FW Init Complete : NO [DEBUG] CSE: Error Code : 3 [DEBUG] CSE: Operation Mode : 0 [DEBUG] CSE: FPF status : unknown Please note, the values shown are in an error state. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1a5548132dadbb188a33a7ae30a0a1fa144d130f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-20soc/intel/alderlake/fsp_params.c: Set DdrSpeedControl UPDFranklin Lin
When override "max_dram_speed_mts", set the DdrSpeedControl to manual. (0:Auto, 1:Manual) BUG=b:229549930 BRANCH=none TEST=build coreboot without error Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com> Change-Id: Iffbbee8082fb1a41e0ed1db3f4ea9ec4709c9ce7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65877 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20soc/intel/cmn/pch/lockdown: Guard gpmr_lockdown_cfgSean Rhodes
Guard gpmr_lockdown_cfg with SOC_INTEL_COMMON_BLOCK_GPMR so it doesn't run on platforms that don't select this. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iab5bbd399c3a654dcb95eaa8fce683a50c7322f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65227 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-20soc/intel/common/pch: Decouple CLIENT from BASEAngel Pons
In preparation to add a third option, have "Client" platforms select a dedicated Kconfig option instead of the common "_BASE" option. Rewrite the help texts to clarify what "Client" and "Server" mean, because the terms refer to the type of silicon and not to the market segment. Some uniprocessor (single-socket) servers are actually client platforms and there are some multi-socket workstations based on a server platform. Change-Id: I646729d709f60ca2b5e74df18c2b4e52f9b10e6b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-19soc/intel/apollolake: Call heci_init in romstageSean Rhodes
Call heci_init to initialise all Heci devices and bring them to d0. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id2865b649331846fc119da7c4be56cc1fed56b8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/64860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-18soc/intel/meteorlake: Allow possible options for MP InitSubrata Banik
Ported back from commit ceaf9d116949da68aa9c ("soc/intel/alderlake: Allow possible options for MP Init") This patch creates choice that lists all possible options to perform MP Init as below for Intel Meteor Lake platform: 1. MTL_USE_FSP_MP_INIT: Allow coreboot to bring APs from reset and FSP runs feature programming based and selects MP_SERVICES_PPI_V2 config. 2. MTL_USE_COREBOOT_MP_INIT: Allow coreboot to perform MP Init (both AP init and feature programming) using native implementation. Additionally, selects required RELOAD_MICROCODE_PATCH when coreboot is expected to run MP Init. Refactor SoC code to allow required FSP UPD override based on selected MP Init option. Additionally, added `FIXME` comment to ensure Intel MTL FSP can bring back SkipMpInit UPD in MTL to let coreboot override this UPD and ensure independent MP Init flow. BUG=b:219053812 TEST=Able to build google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic917e4e03e24d73190cfc72c6ed8e59af427bedf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65743 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-18soc/intel/meteorlake: Choose coreboot doing MP Init over FSPSubrata Banik
This patch enables coreboot doing Multiprocessor Initialization (MP) for Meteor Lake CPU using the native coreboot drivers and passes the MP PPI data structure to let FSP to perform CPU feature programming (anything that is restricted) as part of FSP-S. Additionally, modify the kconfig inclusion order alphabetically. BUG=b:219061518, b:219053812 TEST=Able to bring all APs from reset by coreboot and successfully able to perform all CPU feature programming using MP PPI services. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic2781ee0b39e42aa579b72d3d4ee6586d5a89a02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65742 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-18soc/intel/meteorlake: Enable `DEFAULT_X2APIC_LATE_WORKAROUND`Subrata Banik
This patch ensures Intel Meteor Lake can enable the X2APIC feature. While debugging Intel Meteor Lake (MTL) based platforms it seems like enabling `DEFAULT_X2APIC` runs into a hang while coreboot tries to bring the application processors (APs) from reset using X2APIC mode. [INFO ] LAPIC 0x10 switched to X2APIC mode. ... [DEBUG] Attempting to start 3 APs [DEBUG] Waiting for 10ms after sending INIT. [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [ERROR] Not all APs checked in: 0/3. [DEBUG] 0/3 eventually checked in? [ERROR] MP initialization failure. [ERROR] MP initialization failure. Note: The AP bring up flow between XAPIC and X2APIC are the same except the way to access those LAPIC registers. X2APIC expects to access all LAPIC registers using MSR (base with 0x800). The correct flow to enable X2APIC on MTL would be as follows: 1. Let BSP bring all APs in XAPIC mode. [INFO ] LAPIC 0x10 in XAPIC mode. ... [DEBUG] Attempting to start 3 APs [DEBUG] Waiting for 10ms after sending INIT. [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [INFO ] LAPIC 0x11 in XAPIC mode. [INFO ] LAPIC 0x0 in XAPIC mode. [INFO ] LAPIC 0x80 in XAPIC mode. 2. Call enable_x2apic() function on all CPUs (BSP and APs) And at the end of #2 above, all cores will now switch to X2APIC from XAPIC. [INFO ] Initializing CPU #0 [DEBUG] CPU: vendor Intel device a06a0 [DEBUG] Clearing out pending MCEs [INFO ] LAPIC 0x10 switched to X2APIC mode. ... [INFO ] CPU #0 initialized [INFO ] Initializing CPU #1 [DEBUG] CPU: vendor Intel device a06a0 [DEBUG] Clearing out pending MCEs [INFO ] LAPIC 0x11 switched to X2APIC mode. Note: Intel MTL FSP also follow the same steps for x2APIC enablement while coreboot selects USE_INTEL_FSP_MP_INIT config instead MP_SERVICES_PPI_V2. BUG=b:219061518, b:219053812 TEST=Able to perform coreboot doing AP init with DEFAULT_X2APIC_LATE_WORKAROUND config enabled without running into any hang issue. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie9c8fad6c46b15b5b08c9cc4ef53f2a6872bd0ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/65741 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-18soc/intel/meteorlake: Account for GSPI2 everywhereAngel Pons
Commit e54a8fd43247d767f16a37f3e3150b2915d809bc (soc/intel/meteorlake: Add entry for GSPI2 device) added an entry for the GSPI2 device in the devicetree, but did not add any other entries. Ensure that the rest of the code is aware of the GSPI2 device to avoid any problems. Change-Id: Ib59bd289751bd96402c4adc61ffbee3bebe0edb0 Found-by: Coverity CID 1490681 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-07-18treewide: Don't add bitsElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Id56310bd616cd19fee5dc934676006b2dc34b1ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/65929 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-15soc/intel/xeon_sp: Make gsi_bases platform independentChristian Walter
This commit makes gsi_bases platform independent. It introduces two new Kconfigs which set if there are IIO APICs on other devices than the PCH or not, and where they do start. Change-Id: I40db4a8fd90572757687f35bbd8eebd7229fc75a Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65531 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-15soc/intel/cannonlake: Update VR config for Coffee LakeChristian Walter
This is based on the following Intel documents: * 570805 * 570806 * 572062 * 571264 Change-Id: I199415902d26fa5341ef3212a9169836ea4df74a Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-07-14soc/intel/alderlake: Support PCIe hardware compliance test modeSridahr Siricilla
The validation process verifies that hardware components comply with the standard hardware specifications. For instance, PCI express implementation must comply with the hardware PCIe specification requirements: Electrical, Configuration, Link Protocol and Transaction Protocol. To perform these tests the hardware must be configured in a particular state: some feature related to power management need to be turned off, hot plug should be enabled... This patch sets the appropriate FSP Updateable Product Data flags to get the hardware in the proper configuration: - Enable PCIe hotplug on all ports - Set clock sources to run free - Set the FSP compliance test mode flag BUG=b:235863379 TEST=Compilation with and without the flag Verify code path with instrumentation Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Ic07b9276121dfbd273a8f63a1f775ddbd3566884 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-14soc/intel/common: Introduce SOC_INTEL_COMPLIANCE_TEST_MODEJeremy Compostella
This config can be used to make coreboot configure the hardware to meet compliance tests requirements. SoCs which support compliance testing features should set the SOC_INTEL_SUPPORTS_COMPLIANCE_TEST_MODE flag. BUG=b:235863379 TEST=Successful compilation Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Iec760ae89e2b892ef45e6750e823ab5a8609d0fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/65091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-14soc/intel/broadwell: Drop vboot supportYu-Ping Wu
There is an ongoing effort to deprecate VBOOT_VBNV_CMOS, and replace it with VBOOT_VBNV_FLASH [1]. Since SOC_INTEL_BROADWELL doesn't support flash writes in early stages (BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES), drop vboot as well as ChromeOS support for all broadwell boards, including auron, jecht and wtm2. [1] https://issuetracker.google.com/issues/235293589 BUG=b:235293589 TEST=./util/abuild/abuild -t GOOGLE_GUADO -a TEST=./util/abuild/abuild -t GOOGLE_BUDDY -a Change-Id: I002ab0f5f281c098afba16ada3621f1539c66d6b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-07-14soc/intel/meteorlake: Add entry for GSPI2 deviceSubrata Banik
This patch adds GSPI2 (PCI device B0:D18:F6) entry into the chipset.cb. Additionally, increases `CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX` value to include GSPI2 as well. BUG=b:224325352 TEST=Able to build and boot Google/Rex platform. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I901128a1773fc6d2ba87e3e4972f45ad4a754d35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65675 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-13soc/intel/meteorlake: Use double digit GPIO pad numbersKapil Porwal
Google uses two digit GPIO pad numbers for internal GPIO references and Intel has updated their GPIO naming schemes too (see the GPIO implementation worksheet #641238) so use double digit GPIO pad numbers. Format - "GPP_%c%02d", gpio_group, gpio_pad_num e.g. GPP_A0 -> GPP_A00, GPP_V2 -> GPP_V02, GPP_C9 -> GPP_C09 etc. BUG=b:238196741 TEST=Able to build meteorlake based google/rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Ieb7569c1a35b08c0970a604ec7b4b91e6179dd28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65719 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-11soc/intel/meteorlake: Align TCSS functions through SBIJohn Zhao
This change aligns the Meteor Lake TCSS functions of pad configuration and Thunderbolt authentication through the sideband access. BUG=b:213574324 TEST=Build platforms coreboot images successfully. Change-Id: I393f6e1c7d322878cbb684cd95bfa2477195b23a Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-11soc/intel/common/block/pmc/pmclib: Use same loglevel as print_num_status_bitsPatrick Rudolph
Use same log level as print_num_status_bits to make sure the status bits are properly prefix and the newline is added. Change-Id: Ib33798eec7cba601d0d49646c5fc429de5268417 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65715 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-07-09*/fsp/exit_car: Push stack address into %espArthur Heymans
Fixes: 5315e96abf ("arch/x86/postcar: Use a separate stack for C execution") Resolves: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/ thread/TGIWAKZKELJRAEMKJNYRJ55MX2CXYNCV/ Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/ thread/2JC3GNJSGXUD6DRVUY7O2O3W6OM3E2MY/ 5315e96abf broke platforms using FSP-M to tear down CAR. It was pushing the value at '_estack' into %esp rather than the address '_estack'. Change-Id: Ie1fc70bd60fe3a2519ffb71625a35630fa732ff6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65716 Reviewed-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-08soc/intel/apollolake/meminit.c: Remove unuseful commentElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ia81b4397c92f100abad9b1e974bbebfe49008439 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-08soc/intel/apollolake: Fix incorrect GPE numberReka Norman
BUG=None TEST=None Signed-off-by: Reka Norman <rekanorman@chromium.org> Change-Id: I2eb6e94e5d87bb19b11e27461e2b5bdaee9d59bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65691 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-08soc/intel/common/pch: Fix incorrect GPE numberReka Norman
BUG=None TEST=None Change-Id: I7a4081f0f57e0faa968ad142debdc40a9e26dc9b Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65690 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-08soc/intel/alderlake: Hook-up public Alder Lake microcodeMichał Żygowski
CPUIDs and Engineering Samples decoding based on DOC #618427. Keep MICROCODE_BLOB_UNDISCLOSED for PCH-N SKUs as microcode blobs are still missing. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ibb1337e5cbf5b82fdaceb7eb4661d708a32ff0ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/65564 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-07-08soc/intel/adl: Add support to configure package c-state demotionV Sowmya
This patch adds the support to enable/disable package c-state demotion feature from the devicetree based on mainboard requirement. BUG=b:235005582 TEST=Build and boot to verify that the right value has been passed to the FSP. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I9e254988bc3d20b9f9e42a605cc0ebd419ab49ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/65663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-07-07soc/intel/common/graphics: Add another Meteor Lake device IDWonkyu Kim
Add 0x7d55 as another ID for Meteor Lake graphics controllers. TEST=Boot with MTL silicon to check coreboot log for DID2 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Iea01f6d4f2469fc0eeac73a3f1c4b9af1f39463c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2022-07-07soc/intel/alderlake: change functions arguments to constEran Mitrani
Change-Id: Ib8d9a9e94d16ad291d9cc8576db845a634ae026e Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65614 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-07soc/intel/alderlake/acpi/gpio.asl: Add GPIO Commnity 3 for ADL-SMichał Żygowski
This patch fixes the issue with INTC1056 invalid resource reported by alderlake-pinctrl Linux driver on ADL-S platform. The driver also includes GPIO Community 3 in the GPIO list compared to ADL-N which was missing in GPIO ACPI device. TEST=Boot Ubuntu 22.04 on MSI PRO Z690-A DDR4 WIFI and check there is no invalid resource error reported by alderlake-pinctrl Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I23da68c247de86438cc2eef2b5a5a9aa711c1d7e Reviewed-on: https://review.coreboot.org/c/coreboot/+/65551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-07soc/intel/alderlake/acpi/gpio.asl: Fix lower case typoMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: If66c2799d4d74ff9f309665a0336b5f679796f9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-07soc/intel/meteorlake: Remove `ADL` instancesSubrata Banik
This patch removes all instances of the `ADL` from Meteor Lake SoC directory. TEST=Able to build and boot Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8153b2070467beb582ce1f70be97272ce09ca04c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65667 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-07soc/intel/meteorlake: Update IFD_CHIPSET kconfig valueSubrata Banik
This patch updates IFD_CHIPSET kconfig value from `ifd2` to `mtl`. TEST=Able to build and boot Google/Rex image on MTL emulation platform. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I416f881bcbe3dd7494ead636d6b593366a51b31c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-06soc/intel/common: Update the comment on CSE Region layoutSridhar Siricilla
The comment indicates CSE's data partition is placed after BP2. But, it was place after BP1.So, the patch updates the comment to reflect the CSE Region layout correctly. TEST=Build the code for Brya and didn't notice any compilation errors Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ic871e2e395de17157f4f526064a26bfad538707f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 10:57:26 +0000